1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. 4 * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> 5 */ 6 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/pwm/pwm.h> 9#include "rk3399.dtsi" 10#include "rk3399-opp.dtsi" 11 12/ { 13 aliases { 14 mmc0 = &sdio0; 15 mmc1 = &sdmmc; 16 mmc2 = &sdhci; 17 }; 18 19 chosen { 20 stdout-path = "serial2:1500000n8"; 21 }; 22 23 clkin_gmac: external-gmac-clock { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "clkin_gmac"; 27 #clock-cells = <0>; 28 }; 29 30 gpio-keys { 31 compatible = "gpio-keys"; 32 autorepeat; 33 pinctrl-names = "default"; 34 pinctrl-0 = <&pwrbtn>; 35 36 power { 37 debounce-interval = <100>; 38 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 39 label = "GPIO Key Power"; 40 linux,code = <KEY_POWER>; 41 wakeup-source; 42 }; 43 }; 44 45 ir-receiver { 46 compatible = "gpio-ir-receiver"; 47 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; 48 pinctrl-0 = <&ir_int>; 49 pinctrl-names = "default"; 50 }; 51 52 leds { 53 compatible = "gpio-leds"; 54 pinctrl-names = "default"; 55 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; 56 57 work_led: led-0 { 58 label = "work"; 59 default-state = "on"; 60 gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; 61 }; 62 63 diy_led: led-1 { 64 label = "diy"; 65 default-state = "off"; 66 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; 67 }; 68 }; 69 70 fan: pwm-fan { 71 compatible = "pwm-fan"; 72 cooling-levels = <0 100 150 200 255>; 73 #cooling-cells = <2>; 74 fan-supply = <&vcc12v_dcin>; 75 pwms = <&pwm1 0 50000 0>; 76 }; 77 78 sdio_pwrseq: sdio-pwrseq { 79 compatible = "mmc-pwrseq-simple"; 80 clocks = <&rk808 1>; 81 clock-names = "ext_clock"; 82 pinctrl-names = "default"; 83 pinctrl-0 = <&wifi_enable_h>; 84 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; 85 }; 86 87 sound { 88 compatible = "audio-graph-card"; 89 label = "Analog"; 90 dais = <&i2s1_p0>; 91 }; 92 93 sound-dit { 94 compatible = "audio-graph-card"; 95 label = "SPDIF"; 96 dais = <&spdif_p0>; 97 }; 98 99 spdif-dit { 100 compatible = "linux,spdif-dit"; 101 #sound-dai-cells = <0>; 102 103 port { 104 dit_p0_0: endpoint { 105 remote-endpoint = <&spdif_p0_0>; 106 }; 107 }; 108 }; 109 110 vcc12v_dcin: vcc12v-dcin { 111 compatible = "regulator-fixed"; 112 regulator-name = "vcc12v_dcin"; 113 regulator-always-on; 114 regulator-boot-on; 115 regulator-min-microvolt = <12000000>; 116 regulator-max-microvolt = <12000000>; 117 }; 118 119 /* switched by pmic_sleep */ 120 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { 121 compatible = "regulator-fixed"; 122 regulator-name = "vcc1v8_s3"; 123 regulator-always-on; 124 regulator-boot-on; 125 regulator-min-microvolt = <1800000>; 126 regulator-max-microvolt = <1800000>; 127 vin-supply = <&vcc_1v8>; 128 }; 129 130 /* micro SD card power */ 131 vcc3v0_sd: vcc3v0-sd { 132 compatible = "regulator-fixed"; 133 enable-active-high; 134 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&sdmmc0_pwr_h>; 137 regulator-name = "vcc3v0_sd"; 138 regulator-always-on; 139 regulator-min-microvolt = <3000000>; 140 regulator-max-microvolt = <3000000>; 141 vin-supply = <&vcc3v3_sys>; 142 143 regulator-state-mem { 144 regulator-off-in-suspend; 145 }; 146 }; 147 148 vcc3v3_pcie: vcc3v3-pcie-regulator { 149 compatible = "regulator-fixed"; 150 enable-active-high; 151 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pcie_pwr_en>; 154 regulator-name = "vcc3v3_pcie"; 155 regulator-always-on; 156 regulator-boot-on; 157 vin-supply = <&vcc12v_dcin>; 158 }; 159 160 vcc3v3_sys: vcc3v3-sys { 161 compatible = "regulator-fixed"; 162 regulator-name = "vcc3v3_sys"; 163 regulator-always-on; 164 regulator-boot-on; 165 regulator-min-microvolt = <3300000>; 166 regulator-max-microvolt = <3300000>; 167 vin-supply = <&vcc5v0_sys>; 168 }; 169 170 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ 171 vcc5v0_host: vcc5v0-host-regulator { 172 compatible = "regulator-fixed"; 173 enable-active-high; 174 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; 175 pinctrl-names = "default"; 176 pinctrl-0 = <&vcc5v0_host_en>; 177 regulator-name = "vcc5v0_host"; 178 regulator-always-on; 179 vin-supply = <&vcc5v0_usb>; 180 }; 181 182 vcc5v0_typec: vcc5v0-typec-regulator { 183 compatible = "regulator-fixed"; 184 enable-active-high; 185 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&vcc5v0_typec_en>; 188 regulator-name = "vcc5v0_typec"; 189 regulator-always-on; 190 vin-supply = <&vcc5v0_usb>; 191 }; 192 193 vcc5v0_sys: vcc5v0-sys { 194 compatible = "regulator-fixed"; 195 regulator-name = "vcc5v0_sys"; 196 regulator-always-on; 197 regulator-boot-on; 198 regulator-min-microvolt = <5000000>; 199 regulator-max-microvolt = <5000000>; 200 vin-supply = <&vcc12v_dcin>; 201 }; 202 203 vcc5v0_usb: vcc5v0-usb { 204 compatible = "regulator-fixed"; 205 regulator-name = "vcc5v0_usb"; 206 regulator-always-on; 207 regulator-boot-on; 208 regulator-min-microvolt = <5000000>; 209 regulator-max-microvolt = <5000000>; 210 vin-supply = <&vcc12v_dcin>; 211 }; 212 213 vdd_log: vdd-log { 214 compatible = "pwm-regulator"; 215 pwms = <&pwm2 0 25000 1>; 216 pwm-supply = <&vcc5v0_sys>; 217 regulator-name = "vdd_log"; 218 regulator-always-on; 219 regulator-boot-on; 220 regulator-min-microvolt = <800000>; 221 regulator-max-microvolt = <1700000>; 222 }; 223}; 224 225&cpu_l0 { 226 cpu-supply = <&vdd_cpu_l>; 227}; 228 229&cpu_l1 { 230 cpu-supply = <&vdd_cpu_l>; 231}; 232 233&cpu_l2 { 234 cpu-supply = <&vdd_cpu_l>; 235}; 236 237&cpu_l3 { 238 cpu-supply = <&vdd_cpu_l>; 239}; 240 241&cpu_b0 { 242 cpu-supply = <&vdd_cpu_b>; 243}; 244 245&cpu_b1 { 246 cpu-supply = <&vdd_cpu_b>; 247}; 248 249&cpu_thermal { 250 trips { 251 cpu_warm: cpu_warm { 252 temperature = <55000>; 253 hysteresis = <2000>; 254 type = "active"; 255 }; 256 257 cpu_hot: cpu_hot { 258 temperature = <65000>; 259 hysteresis = <2000>; 260 type = "active"; 261 }; 262 }; 263 264 cooling-maps { 265 map2 { 266 trip = <&cpu_warm>; 267 cooling-device = <&fan THERMAL_NO_LIMIT 1>; 268 }; 269 270 map3 { 271 trip = <&cpu_hot>; 272 cooling-device = <&fan 2 THERMAL_NO_LIMIT>; 273 }; 274 }; 275}; 276 277&emmc_phy { 278 status = "okay"; 279}; 280 281&gmac { 282 assigned-clocks = <&cru SCLK_RMII_SRC>; 283 assigned-clock-parents = <&clkin_gmac>; 284 clock_in_out = "input"; 285 phy-supply = <&vcc_lan>; 286 phy-mode = "rgmii"; 287 pinctrl-names = "default"; 288 pinctrl-0 = <&rgmii_pins>; 289 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 290 snps,reset-active-low; 291 snps,reset-delays-us = <0 10000 50000>; 292 tx_delay = <0x28>; 293 rx_delay = <0x11>; 294 status = "okay"; 295}; 296 297&hdmi { 298 ddc-i2c-bus = <&i2c3>; 299 pinctrl-names = "default"; 300 pinctrl-0 = <&hdmi_cec>; 301 status = "okay"; 302}; 303 304&hdmi_sound { 305 status = "okay"; 306}; 307 308&gpu { 309 mali-supply = <&vdd_gpu>; 310 status = "okay"; 311}; 312 313&i2c0 { 314 clock-frequency = <400000>; 315 i2c-scl-rising-time-ns = <168>; 316 i2c-scl-falling-time-ns = <4>; 317 status = "okay"; 318 319 rk808: pmic@1b { 320 compatible = "rockchip,rk808"; 321 reg = <0x1b>; 322 interrupt-parent = <&gpio3>; 323 interrupts = <10 IRQ_TYPE_LEVEL_LOW>; 324 #clock-cells = <1>; 325 clock-output-names = "xin32k", "rk808-clkout2"; 326 pinctrl-names = "default"; 327 pinctrl-0 = <&pmic_int_l>; 328 rockchip,system-power-controller; 329 wakeup-source; 330 331 vcc1-supply = <&vcc5v0_sys>; 332 vcc2-supply = <&vcc5v0_sys>; 333 vcc3-supply = <&vcc5v0_sys>; 334 vcc4-supply = <&vcc5v0_sys>; 335 vcc6-supply = <&vcc5v0_sys>; 336 vcc7-supply = <&vcc5v0_sys>; 337 vcc8-supply = <&vcc3v3_sys>; 338 vcc9-supply = <&vcc5v0_sys>; 339 vcc10-supply = <&vcc5v0_sys>; 340 vcc11-supply = <&vcc5v0_sys>; 341 vcc12-supply = <&vcc3v3_sys>; 342 vddio-supply = <&vcca_1v8>; 343 344 regulators { 345 vdd_center: DCDC_REG1 { 346 regulator-name = "vdd_center"; 347 regulator-always-on; 348 regulator-boot-on; 349 regulator-min-microvolt = <750000>; 350 regulator-max-microvolt = <1350000>; 351 regulator-ramp-delay = <6001>; 352 regulator-state-mem { 353 regulator-off-in-suspend; 354 }; 355 }; 356 357 vdd_cpu_l: DCDC_REG2 { 358 regulator-name = "vdd_cpu_l"; 359 regulator-always-on; 360 regulator-boot-on; 361 regulator-min-microvolt = <750000>; 362 regulator-max-microvolt = <1350000>; 363 regulator-ramp-delay = <6001>; 364 regulator-state-mem { 365 regulator-off-in-suspend; 366 }; 367 }; 368 369 vcc_ddr: DCDC_REG3 { 370 regulator-name = "vcc_ddr"; 371 regulator-always-on; 372 regulator-boot-on; 373 regulator-state-mem { 374 regulator-on-in-suspend; 375 }; 376 }; 377 378 vcc_1v8: DCDC_REG4 { 379 regulator-name = "vcc_1v8"; 380 regulator-always-on; 381 regulator-boot-on; 382 regulator-min-microvolt = <1800000>; 383 regulator-max-microvolt = <1800000>; 384 regulator-state-mem { 385 regulator-on-in-suspend; 386 regulator-suspend-microvolt = <1800000>; 387 }; 388 }; 389 390 vcc1v8_dvp: LDO_REG1 { 391 regulator-name = "vcc1v8_dvp"; 392 regulator-always-on; 393 regulator-boot-on; 394 regulator-min-microvolt = <1800000>; 395 regulator-max-microvolt = <1800000>; 396 regulator-state-mem { 397 regulator-off-in-suspend; 398 }; 399 }; 400 401 vcc3v0_touch: LDO_REG2 { 402 regulator-name = "vcc3v0_touch"; 403 regulator-always-on; 404 regulator-boot-on; 405 regulator-min-microvolt = <3000000>; 406 regulator-max-microvolt = <3000000>; 407 regulator-state-mem { 408 regulator-off-in-suspend; 409 }; 410 }; 411 412 vcca_1v8: LDO_REG3 { 413 regulator-name = "vcca_1v8"; 414 regulator-always-on; 415 regulator-boot-on; 416 regulator-min-microvolt = <1800000>; 417 regulator-max-microvolt = <1800000>; 418 regulator-state-mem { 419 regulator-on-in-suspend; 420 regulator-suspend-microvolt = <1800000>; 421 }; 422 }; 423 424 vcc_sdio: LDO_REG4 { 425 regulator-name = "vcc_sdio"; 426 regulator-always-on; 427 regulator-boot-on; 428 regulator-min-microvolt = <1800000>; 429 regulator-max-microvolt = <3000000>; 430 regulator-state-mem { 431 regulator-on-in-suspend; 432 regulator-suspend-microvolt = <3000000>; 433 }; 434 }; 435 436 vcca3v0_codec: LDO_REG5 { 437 regulator-name = "vcca3v0_codec"; 438 regulator-always-on; 439 regulator-boot-on; 440 regulator-min-microvolt = <3000000>; 441 regulator-max-microvolt = <3000000>; 442 regulator-state-mem { 443 regulator-off-in-suspend; 444 }; 445 }; 446 447 vcc_1v5: LDO_REG6 { 448 regulator-name = "vcc_1v5"; 449 regulator-always-on; 450 regulator-boot-on; 451 regulator-min-microvolt = <1500000>; 452 regulator-max-microvolt = <1500000>; 453 regulator-state-mem { 454 regulator-on-in-suspend; 455 regulator-suspend-microvolt = <1500000>; 456 }; 457 }; 458 459 vcca1v8_codec: LDO_REG7 { 460 regulator-name = "vcca1v8_codec"; 461 regulator-always-on; 462 regulator-boot-on; 463 regulator-min-microvolt = <1800000>; 464 regulator-max-microvolt = <1800000>; 465 regulator-state-mem { 466 regulator-off-in-suspend; 467 }; 468 }; 469 470 vcc_3v0: LDO_REG8 { 471 regulator-name = "vcc_3v0"; 472 regulator-always-on; 473 regulator-boot-on; 474 regulator-min-microvolt = <3000000>; 475 regulator-max-microvolt = <3000000>; 476 regulator-state-mem { 477 regulator-on-in-suspend; 478 regulator-suspend-microvolt = <3000000>; 479 }; 480 }; 481 482 vcc3v3_s3: vcc_lan: SWITCH_REG1 { 483 regulator-name = "vcc3v3_s3"; 484 regulator-always-on; 485 regulator-boot-on; 486 regulator-state-mem { 487 regulator-off-in-suspend; 488 }; 489 }; 490 491 vcc3v3_s0: SWITCH_REG2 { 492 regulator-name = "vcc3v3_s0"; 493 regulator-always-on; 494 regulator-boot-on; 495 regulator-state-mem { 496 regulator-off-in-suspend; 497 }; 498 }; 499 }; 500 }; 501 502 vdd_cpu_b: regulator@40 { 503 compatible = "silergy,syr827"; 504 reg = <0x40>; 505 fcs,suspend-voltage-selector = <1>; 506 pinctrl-names = "default"; 507 pinctrl-0 = <&vsel1_pin>; 508 regulator-name = "vdd_cpu_b"; 509 regulator-min-microvolt = <712500>; 510 regulator-max-microvolt = <1500000>; 511 regulator-ramp-delay = <1000>; 512 regulator-always-on; 513 regulator-boot-on; 514 vin-supply = <&vcc5v0_sys>; 515 516 regulator-state-mem { 517 regulator-off-in-suspend; 518 }; 519 }; 520 521 vdd_gpu: regulator@41 { 522 compatible = "silergy,syr828"; 523 reg = <0x41>; 524 fcs,suspend-voltage-selector = <1>; 525 pinctrl-names = "default"; 526 pinctrl-0 = <&vsel2_pin>; 527 regulator-name = "vdd_gpu"; 528 regulator-min-microvolt = <712500>; 529 regulator-max-microvolt = <1500000>; 530 regulator-ramp-delay = <1000>; 531 regulator-always-on; 532 regulator-boot-on; 533 vin-supply = <&vcc5v0_sys>; 534 535 regulator-state-mem { 536 regulator-off-in-suspend; 537 }; 538 }; 539}; 540 541&i2c1 { 542 i2c-scl-rising-time-ns = <300>; 543 i2c-scl-falling-time-ns = <15>; 544 status = "okay"; 545}; 546 547&i2c3 { 548 i2c-scl-rising-time-ns = <450>; 549 i2c-scl-falling-time-ns = <15>; 550 status = "okay"; 551}; 552 553&i2c4 { 554 i2c-scl-rising-time-ns = <600>; 555 i2c-scl-falling-time-ns = <20>; 556 status = "okay"; 557 558 fusb0: typec-portc@22 { 559 compatible = "fcs,fusb302"; 560 reg = <0x22>; 561 interrupt-parent = <&gpio1>; 562 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; 563 pinctrl-names = "default"; 564 pinctrl-0 = <&fusb0_int>; 565 vbus-supply = <&vcc5v0_typec>; 566 status = "okay"; 567 }; 568}; 569 570&i2s0 { 571 rockchip,playback-channels = <8>; 572 rockchip,capture-channels = <8>; 573 status = "okay"; 574}; 575 576&i2s1 { 577 rockchip,playback-channels = <2>; 578 rockchip,capture-channels = <2>; 579 status = "okay"; 580 581 i2s1_p0: port { 582 i2s1_p0_0: endpoint { 583 dai-format = "i2s"; 584 mclk-fs = <256>; 585 remote-endpoint = <&es8316_p0_0>; 586 }; 587 }; 588}; 589 590&i2s2 { 591 status = "okay"; 592}; 593 594&io_domains { 595 status = "okay"; 596 597 bt656-supply = <&vcc1v8_dvp>; 598 audio-supply = <&vcc_3v0>; 599 sdmmc-supply = <&vcc_sdio>; 600 gpio1830-supply = <&vcc_3v0>; 601}; 602 603&pcie0 { 604 ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; 605 num-lanes = <4>; 606 pinctrl-names = "default"; 607 pinctrl-0 = <&pcie_perst>; 608 vpcie12v-supply = <&vcc12v_dcin>; 609 vpcie3v3-supply = <&vcc3v3_pcie>; 610 status = "okay"; 611}; 612 613&pcie_phy { 614 status = "okay"; 615}; 616 617&pmu_io_domains { 618 pmu1830-supply = <&vcc_3v0>; 619 status = "okay"; 620}; 621 622&pinctrl { 623 bt { 624 bt_enable_h: bt-enable-h { 625 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; 626 }; 627 628 bt_host_wake_l: bt-host-wake-l { 629 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; 630 }; 631 632 bt_wake_l: bt-wake-l { 633 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 634 }; 635 }; 636 637 buttons { 638 pwrbtn: pwrbtn { 639 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; 640 }; 641 }; 642 643 fusb302x { 644 fusb0_int: fusb0-int { 645 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 646 }; 647 }; 648 649 ir { 650 ir_int: ir-int { 651 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; 652 }; 653 }; 654 655 leds { 656 work_led_pin: work-led-pin { 657 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; 658 }; 659 660 diy_led_pin: diy-led-pin { 661 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; 662 }; 663 }; 664 665 pcie { 666 pcie_perst: pcie-perst { 667 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 668 }; 669 670 pcie_pwr_en: pcie-pwr-en { 671 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; 672 }; 673 }; 674 675 pmic { 676 pmic_int_l: pmic-int-l { 677 rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; 678 }; 679 680 vsel1_pin: vsel1-pin { 681 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; 682 }; 683 684 vsel2_pin: vsel2-pin { 685 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; 686 }; 687 }; 688 689 sdcard { 690 sdmmc0_pwr_h: sdmmc0-pwr-h { 691 rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; 692 }; 693 694 }; 695 696 sdio-pwrseq { 697 wifi_enable_h: wifi-enable-h { 698 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 699 }; 700 }; 701 702 usb-typec { 703 vcc5v0_typec_en: vcc5v0_typec_en { 704 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 705 }; 706 }; 707 708 usb2 { 709 vcc5v0_host_en: vcc5v0-host-en { 710 rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 711 }; 712 }; 713}; 714 715&pwm0 { 716 status = "okay"; 717}; 718 719&pwm1 { 720 status = "okay"; 721}; 722 723&pwm2 { 724 status = "okay"; 725}; 726 727&saradc { 728 vref-supply = <&vcca1v8_s3>; 729 status = "okay"; 730}; 731 732&sdio0 { 733 bus-width = <4>; 734 cap-sd-highspeed; 735 cap-sdio-irq; 736 disable-wp; 737 keep-power-in-suspend; 738 mmc-pwrseq = <&sdio_pwrseq>; 739 non-removable; 740 pinctrl-names = "default"; 741 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 742 sd-uhs-sdr104; 743 status = "okay"; 744}; 745 746&sdmmc { 747 bus-width = <4>; 748 cap-sd-highspeed; 749 cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; 750 disable-wp; 751 max-frequency = <150000000>; 752 pinctrl-names = "default"; 753 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; 754 vmmc-supply = <&vcc3v0_sd>; 755 vqmmc-supply = <&vcc_sdio>; 756 status = "okay"; 757}; 758 759&sdhci { 760 bus-width = <8>; 761 mmc-hs200-1_8v; 762 non-removable; 763 status = "okay"; 764}; 765 766&spdif { 767 pinctrl-0 = <&spdif_bus_1>; 768 769 spdif_p0: port { 770 spdif_p0_0: endpoint { 771 remote-endpoint = <&dit_p0_0>; 772 }; 773 }; 774}; 775 776&spi1 { 777 status = "okay"; 778 779 flash@0 { 780 compatible = "jedec,spi-nor"; 781 reg = <0>; 782 spi-max-frequency = <10000000>; 783 }; 784}; 785 786&tcphy0 { 787 status = "okay"; 788}; 789 790&tcphy1 { 791 status = "okay"; 792}; 793 794&tsadc { 795 /* tshut mode 0:CRU 1:GPIO */ 796 rockchip,hw-tshut-mode = <1>; 797 /* tshut polarity 0:LOW 1:HIGH */ 798 rockchip,hw-tshut-polarity = <1>; 799 status = "okay"; 800}; 801 802&u2phy0 { 803 status = "okay"; 804 805 u2phy0_otg: otg-port { 806 status = "okay"; 807 }; 808 809 u2phy0_host: host-port { 810 phy-supply = <&vcc5v0_host>; 811 status = "okay"; 812 }; 813}; 814 815&u2phy1 { 816 status = "okay"; 817 818 u2phy1_otg: otg-port { 819 status = "okay"; 820 }; 821 822 u2phy1_host: host-port { 823 phy-supply = <&vcc5v0_host>; 824 status = "okay"; 825 }; 826}; 827 828&uart0 { 829 pinctrl-names = "default"; 830 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; 831 status = "okay"; 832 833 bluetooth { 834 compatible = "brcm,bcm43438-bt"; 835 clocks = <&rk808 1>; 836 clock-names = "lpo"; 837 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; 838 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 839 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; 840 pinctrl-names = "default"; 841 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 842 vbat-supply = <&vcc3v3_sys>; 843 vddio-supply = <&vcc_1v8>; 844 }; 845}; 846 847&uart2 { 848 status = "okay"; 849}; 850 851&usb_host0_ehci { 852 status = "okay"; 853}; 854 855&usb_host0_ohci { 856 status = "okay"; 857}; 858 859&usb_host1_ehci { 860 status = "okay"; 861}; 862 863&usb_host1_ohci { 864 status = "okay"; 865}; 866 867&usbdrd3_0 { 868 status = "okay"; 869}; 870 871&usbdrd_dwc3_0 { 872 status = "okay"; 873 dr_mode = "host"; 874}; 875 876&usbdrd3_1 { 877 status = "okay"; 878}; 879 880&usbdrd_dwc3_1 { 881 status = "okay"; 882 dr_mode = "host"; 883}; 884 885&vopb { 886 status = "okay"; 887}; 888 889&vopb_mmu { 890 status = "okay"; 891}; 892 893&vopl { 894 status = "okay"; 895}; 896 897&vopl_mmu { 898 status = "okay"; 899}; 900