1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * RK3399-based FriendlyElec boards device tree source
4 *
5 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
6 *
7 * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
8 * (http://www.friendlyarm.com)
9 *
10 * Copyright (c) 2018 Collabora Ltd.
11 * Copyright (c) 2019 Arm Ltd.
12 */
13
14/dts-v1/;
15#include <dt-bindings/input/linux-event-codes.h>
16#include "rk3399.dtsi"
17#include "rk3399-opp.dtsi"
18
19/ {
20	chosen {
21		stdout-path = "serial2:1500000n8";
22	};
23
24	clkin_gmac: external-gmac-clock {
25		compatible = "fixed-clock";
26		clock-frequency = <125000000>;
27		clock-output-names = "clkin_gmac";
28		#clock-cells = <0>;
29	};
30
31	vcc3v3_sys: vcc3v3-sys {
32		compatible = "regulator-fixed";
33		regulator-always-on;
34		regulator-boot-on;
35		regulator-min-microvolt = <3300000>;
36		regulator-max-microvolt = <3300000>;
37		regulator-name = "vcc3v3_sys";
38	};
39
40	vcc5v0_sys: vcc5v0-sys {
41		compatible = "regulator-fixed";
42		regulator-always-on;
43		regulator-boot-on;
44		regulator-min-microvolt = <5000000>;
45		regulator-max-microvolt = <5000000>;
46		regulator-name = "vcc5v0_sys";
47		vin-supply = <&vdd_5v>;
48	};
49
50	/* switched by pmic_sleep */
51	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
52		compatible = "regulator-fixed";
53		regulator-always-on;
54		regulator-boot-on;
55		regulator-min-microvolt = <1800000>;
56		regulator-max-microvolt = <1800000>;
57		regulator-name = "vcc1v8_s3";
58		vin-supply = <&vcc_1v8>;
59	};
60
61	vcc3v0_sd: vcc3v0-sd {
62		compatible = "regulator-fixed";
63		enable-active-high;
64		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
65		pinctrl-names = "default";
66		pinctrl-0 = <&sdmmc0_pwr_h>;
67		regulator-always-on;
68		regulator-min-microvolt = <3000000>;
69		regulator-max-microvolt = <3000000>;
70		regulator-name = "vcc3v0_sd";
71		vin-supply = <&vcc3v3_sys>;
72	};
73
74	vbus_typec: vbus-typec {
75		compatible = "regulator-fixed";
76		regulator-min-microvolt = <5000000>;
77		regulator-max-microvolt = <5000000>;
78		regulator-name = "vbus_typec";
79	};
80
81	gpio-keys {
82		compatible = "gpio-keys";
83		autorepeat;
84		pinctrl-names = "default";
85		pinctrl-0 = <&power_key>;
86
87		power {
88			debounce-interval = <100>;
89			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
90			label = "GPIO Key Power";
91			linux,code = <KEY_POWER>;
92			wakeup-source;
93		};
94	};
95
96	leds: gpio-leds {
97		compatible = "gpio-leds";
98		pinctrl-names = "default";
99		pinctrl-0 = <&leds_gpio>;
100
101		status {
102			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
103			label = "status_led";
104			linux,default-trigger = "heartbeat";
105		};
106	};
107
108	sdio_pwrseq: sdio-pwrseq {
109		compatible = "mmc-pwrseq-simple";
110		clocks = <&rk808 1>;
111		clock-names = "ext_clock";
112		pinctrl-names = "default";
113		pinctrl-0 = <&wifi_reg_on_h>;
114		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
115	};
116};
117
118&cpu_b0 {
119	cpu-supply = <&vdd_cpu_b>;
120};
121
122&cpu_b1 {
123	cpu-supply = <&vdd_cpu_b>;
124};
125
126&cpu_l0 {
127	cpu-supply = <&vdd_cpu_l>;
128};
129
130&cpu_l1 {
131	cpu-supply = <&vdd_cpu_l>;
132};
133
134&cpu_l2 {
135	cpu-supply = <&vdd_cpu_l>;
136};
137
138&cpu_l3 {
139	cpu-supply = <&vdd_cpu_l>;
140};
141
142&emmc_phy {
143	status = "okay";
144};
145
146&gmac {
147	assigned-clock-parents = <&clkin_gmac>;
148	assigned-clocks = <&cru SCLK_RMII_SRC>;
149	clock_in_out = "input";
150	pinctrl-names = "default";
151	pinctrl-0 = <&rgmii_pins>;
152	phy-mode = "rgmii";
153	phy-supply = <&vcc3v3_s3>;
154	snps,reset-active-low;
155	snps,reset-delays-us = <0 10000 50000>;
156	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
157	tx_delay = <0x28>;
158	rx_delay = <0x11>;
159	status = "okay";
160};
161
162&gpu {
163	mali-supply = <&vdd_gpu>;
164	status = "okay";
165};
166
167&hdmi {
168	ddc-i2c-bus = <&i2c7>;
169	pinctrl-names = "default";
170	pinctrl-0 = <&hdmi_cec>;
171	status = "okay";
172};
173
174&i2c0 {
175	clock-frequency = <400000>;
176	i2c-scl-rising-time-ns = <160>;
177	i2c-scl-falling-time-ns = <30>;
178	status = "okay";
179
180	vdd_cpu_b: regulator@40 {
181		compatible = "silergy,syr827";
182		reg = <0x40>;
183		fcs,suspend-voltage-selector = <1>;
184		pinctrl-names = "default";
185		pinctrl-0 = <&cpu_b_sleep>;
186		regulator-always-on;
187		regulator-boot-on;
188		regulator-min-microvolt = <712500>;
189		regulator-max-microvolt = <1500000>;
190		regulator-name = "vdd_cpu_b";
191		regulator-ramp-delay = <1000>;
192		vin-supply = <&vcc3v3_sys>;
193
194		regulator-state-mem {
195			regulator-off-in-suspend;
196		};
197	};
198
199	vdd_gpu: regulator@41 {
200		compatible = "silergy,syr828";
201		reg = <0x41>;
202		fcs,suspend-voltage-selector = <1>;
203		pinctrl-names = "default";
204		pinctrl-0 = <&gpu_sleep>;
205		regulator-always-on;
206		regulator-boot-on;
207		regulator-min-microvolt = <712500>;
208		regulator-max-microvolt = <1500000>;
209		regulator-name = "vdd_gpu";
210		regulator-ramp-delay = <1000>;
211		vin-supply = <&vcc3v3_sys>;
212
213		regulator-state-mem {
214			regulator-off-in-suspend;
215		};
216	};
217
218	rk808: pmic@1b {
219		compatible = "rockchip,rk808";
220		reg = <0x1b>;
221		clock-output-names = "xin32k", "rtc_clko_wifi";
222		#clock-cells = <1>;
223		interrupt-parent = <&gpio1>;
224		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
225		pinctrl-names = "default";
226		pinctrl-0 = <&pmic_int_l>;
227		rockchip,system-power-controller;
228		wakeup-source;
229
230		vcc1-supply = <&vcc3v3_sys>;
231		vcc2-supply = <&vcc3v3_sys>;
232		vcc3-supply = <&vcc3v3_sys>;
233		vcc4-supply = <&vcc3v3_sys>;
234		vcc6-supply = <&vcc3v3_sys>;
235		vcc7-supply = <&vcc3v3_sys>;
236		vcc8-supply = <&vcc3v3_sys>;
237		vcc9-supply = <&vcc3v3_sys>;
238		vcc10-supply = <&vcc3v3_sys>;
239		vcc11-supply = <&vcc3v3_sys>;
240		vcc12-supply = <&vcc3v3_sys>;
241		vddio-supply = <&vcc_3v0>;
242
243		regulators {
244			vdd_center: DCDC_REG1 {
245				regulator-always-on;
246				regulator-boot-on;
247				regulator-min-microvolt = <750000>;
248				regulator-max-microvolt = <1350000>;
249				regulator-name = "vdd_center";
250				regulator-ramp-delay = <6001>;
251
252				regulator-state-mem {
253					regulator-off-in-suspend;
254				};
255			};
256
257			vdd_cpu_l: DCDC_REG2 {
258				regulator-always-on;
259				regulator-boot-on;
260				regulator-min-microvolt = <750000>;
261				regulator-max-microvolt = <1350000>;
262				regulator-name = "vdd_cpu_l";
263				regulator-ramp-delay = <6001>;
264
265				regulator-state-mem {
266					regulator-off-in-suspend;
267				};
268			};
269
270			vcc_ddr: DCDC_REG3 {
271				regulator-always-on;
272				regulator-boot-on;
273				regulator-name = "vcc_ddr";
274
275				regulator-state-mem {
276					regulator-on-in-suspend;
277				};
278			};
279
280			vcc_1v8: DCDC_REG4 {
281				regulator-always-on;
282				regulator-boot-on;
283				regulator-min-microvolt = <1800000>;
284				regulator-max-microvolt = <1800000>;
285				regulator-name = "vcc_1v8";
286
287				regulator-state-mem {
288					regulator-on-in-suspend;
289					regulator-suspend-microvolt = <1800000>;
290				};
291			};
292
293			vcc1v8_cam: LDO_REG1 {
294				regulator-always-on;
295				regulator-boot-on;
296				regulator-min-microvolt = <1800000>;
297				regulator-max-microvolt = <1800000>;
298				regulator-name = "vcc1v8_cam";
299
300				regulator-state-mem {
301					regulator-off-in-suspend;
302				};
303			};
304
305			vcc3v0_touch: LDO_REG2 {
306				regulator-always-on;
307				regulator-boot-on;
308				regulator-min-microvolt = <3000000>;
309				regulator-max-microvolt = <3000000>;
310				regulator-name = "vcc3v0_touch";
311
312				regulator-state-mem {
313					regulator-off-in-suspend;
314				};
315			};
316
317			vcc1v8_pmupll: LDO_REG3 {
318				regulator-always-on;
319				regulator-boot-on;
320				regulator-min-microvolt = <1800000>;
321				regulator-max-microvolt = <1800000>;
322				regulator-name = "vcc1v8_pmupll";
323
324				regulator-state-mem {
325					regulator-on-in-suspend;
326					regulator-suspend-microvolt = <1800000>;
327				};
328			};
329
330			vcc_sdio: LDO_REG4 {
331				regulator-always-on;
332				regulator-boot-on;
333				regulator-init-microvolt = <3000000>;
334				regulator-min-microvolt = <1800000>;
335				regulator-max-microvolt = <3300000>;
336				regulator-name = "vcc_sdio";
337
338				regulator-state-mem {
339					regulator-on-in-suspend;
340					regulator-suspend-microvolt = <3000000>;
341				};
342			};
343
344			vcca3v0_codec: LDO_REG5 {
345				regulator-always-on;
346				regulator-boot-on;
347				regulator-min-microvolt = <3000000>;
348				regulator-max-microvolt = <3000000>;
349				regulator-name = "vcca3v0_codec";
350
351				regulator-state-mem {
352					regulator-off-in-suspend;
353				};
354			};
355
356			vcc_1v5: LDO_REG6 {
357				regulator-always-on;
358				regulator-boot-on;
359				regulator-min-microvolt = <1500000>;
360				regulator-max-microvolt = <1500000>;
361				regulator-name = "vcc_1v5";
362
363				regulator-state-mem {
364					regulator-on-in-suspend;
365					regulator-suspend-microvolt = <1500000>;
366				};
367			};
368
369			vcca1v8_codec: LDO_REG7 {
370				regulator-always-on;
371				regulator-boot-on;
372				regulator-min-microvolt = <1800000>;
373				regulator-max-microvolt = <1800000>;
374				regulator-name = "vcca1v8_codec";
375
376				regulator-state-mem {
377					regulator-off-in-suspend;
378				};
379			};
380
381			vcc_3v0: LDO_REG8 {
382				regulator-always-on;
383				regulator-boot-on;
384				regulator-min-microvolt = <3000000>;
385				regulator-max-microvolt = <3000000>;
386				regulator-name = "vcc_3v0";
387
388				regulator-state-mem {
389					regulator-on-in-suspend;
390					regulator-suspend-microvolt = <3000000>;
391				};
392			};
393
394			vcc3v3_s3: SWITCH_REG1 {
395				regulator-always-on;
396				regulator-boot-on;
397				regulator-name = "vcc3v3_s3";
398
399				regulator-state-mem {
400					regulator-off-in-suspend;
401				};
402			};
403
404			vcc3v3_s0: SWITCH_REG2 {
405				regulator-always-on;
406				regulator-boot-on;
407				regulator-name = "vcc3v3_s0";
408
409				regulator-state-mem {
410					regulator-off-in-suspend;
411				};
412			};
413		};
414	};
415};
416
417&i2c1 {
418	clock-frequency = <200000>;
419	i2c-scl-rising-time-ns = <150>;
420	i2c-scl-falling-time-ns = <30>;
421	status = "okay";
422};
423
424&i2c2 {
425	status = "okay";
426};
427
428&i2c4 {
429	clock-frequency = <400000>;
430	i2c-scl-rising-time-ns = <160>;
431	i2c-scl-falling-time-ns = <30>;
432	status = "okay";
433
434	fusb0: typec-portc@22 {
435		compatible = "fcs,fusb302";
436		reg = <0x22>;
437		interrupt-parent = <&gpio1>;
438		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
439		pinctrl-names = "default";
440		pinctrl-0 = <&fusb0_int>;
441		vbus-supply = <&vbus_typec>;
442	};
443};
444
445&i2c7 {
446	status = "okay";
447};
448
449&io_domains {
450	bt656-supply = <&vcc_1v8>;
451	audio-supply = <&vcca1v8_codec>;
452	sdmmc-supply = <&vcc_sdio>;
453	gpio1830-supply = <&vcc_3v0>;
454	status = "okay";
455};
456
457&pcie_phy {
458	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
459	assigned-clock-rates = <100000000>;
460	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
461	status = "okay";
462};
463
464&pcie0 {
465	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
466	max-link-speed = <2>;
467	num-lanes = <4>;
468	status = "okay";
469};
470
471&pinctrl {
472	fusb30x {
473		fusb0_int: fusb0-int {
474			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
475		};
476	};
477
478	gpio-leds {
479		leds_gpio: leds-gpio {
480			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
481		};
482	};
483
484	pmic {
485		cpu_b_sleep: cpu-b-sleep {
486			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
487		};
488
489		gpu_sleep: gpu-sleep {
490			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
491		};
492
493		pmic_int_l: pmic-int-l {
494			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
495		};
496	};
497
498	rockchip-key {
499		power_key: power-key {
500			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
501		};
502	};
503
504	sdio {
505		bt_host_wake_l: bt-host-wake-l {
506			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
507		};
508
509		bt_reg_on_h: bt-reg-on-h {
510			/* external pullup to VCC1V8_PMUPLL */
511			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
512		};
513
514		bt_wake_l: bt-wake-l {
515			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
516		};
517
518		wifi_reg_on_h: wifi-reg_on-h {
519			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
520		};
521	};
522
523	sdmmc {
524		sdmmc0_det_l: sdmmc0-det-l {
525			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
526		};
527
528		sdmmc0_pwr_h: sdmmc0-pwr-h {
529			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
530		};
531	};
532};
533
534&pmu_io_domains {
535	pmu1830-supply = <&vcc_3v0>;
536	status = "okay";
537};
538
539&pwm0 {
540	status = "okay";
541};
542
543&pwm1 {
544	status = "okay";
545};
546
547&pwm2 {
548	pinctrl-names = "active";
549	pinctrl-0 = <&pwm2_pin_pull_down>;
550	status = "okay";
551};
552
553&saradc {
554	vref-supply = <&vcca1v8_s3>;
555	status = "okay";
556};
557
558&sdhci {
559	bus-width = <8>;
560	mmc-hs200-1_8v;
561	non-removable;
562	status = "okay";
563};
564
565&sdio0 {
566	bus-width = <4>;
567	cap-sd-highspeed;
568	cap-sdio-irq;
569	keep-power-in-suspend;
570	mmc-pwrseq = <&sdio_pwrseq>;
571	non-removable;
572	pinctrl-names = "default";
573	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
574	sd-uhs-sdr104;
575	status = "okay";
576};
577
578&sdmmc {
579	bus-width = <4>;
580	cap-sd-highspeed;
581	cap-mmc-highspeed;
582	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
583	disable-wp;
584	pinctrl-names = "default";
585	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
586	sd-uhs-sdr104;
587	vmmc-supply = <&vcc3v0_sd>;
588	vqmmc-supply = <&vcc_sdio>;
589	status = "okay";
590};
591
592&tcphy0 {
593	status = "okay";
594};
595
596&tcphy1 {
597	status = "okay";
598};
599
600&tsadc {
601	/* tshut mode 0:CRU 1:GPIO */
602	rockchip,hw-tshut-mode = <1>;
603	/* tshut polarity 0:LOW 1:HIGH */
604	rockchip,hw-tshut-polarity = <1>;
605	status = "okay";
606};
607
608&u2phy0 {
609	status = "okay";
610};
611
612&u2phy0_host {
613	status = "okay";
614};
615
616&u2phy0_otg {
617	status = "okay";
618};
619
620&u2phy1 {
621	status = "okay";
622};
623
624&u2phy1_host {
625	status = "okay";
626};
627
628&u2phy1_otg {
629	status = "okay";
630};
631
632&uart0 {
633	pinctrl-names = "default";
634	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
635	status = "okay";
636
637	bluetooth {
638		compatible = "brcm,bcm43438-bt";
639		clocks = <&rk808 1>;
640		clock-names = "lpo";
641		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
642		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
643		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
644		max-speed = <4000000>;
645		pinctrl-names = "default";
646		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
647		vbat-supply = <&vcc3v3_sys>;
648		vddio-supply = <&vcc_1v8>;
649	};
650};
651
652&uart2 {
653	status = "okay";
654};
655
656&usbdrd3_0 {
657	status = "okay";
658};
659
660&usbdrd3_1 {
661	status = "okay";
662};
663
664&usbdrd_dwc3_0 {
665	status = "okay";
666};
667
668&usbdrd_dwc3_1 {
669	dr_mode = "host";
670	status = "okay";
671};
672
673&usb_host0_ehci {
674	status = "okay";
675};
676
677&usb_host0_ohci {
678	status = "okay";
679};
680
681&usb_host1_ehci {
682	status = "okay";
683};
684
685&usb_host1_ohci {
686	status = "okay";
687};
688
689&vopb {
690	status = "okay";
691};
692
693&vopb_mmu {
694	status = "okay";
695};
696
697&vopl {
698	status = "okay";
699};
700
701&vopl_mmu {
702	status = "okay";
703};
704