1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Google Gru-scarlet board device tree source
4 *
5 * Copyright 2018 Google, Inc
6 */
7
8#include "rk3399-gru.dtsi"
9
10/{
11	/* Power tree */
12
13	/* ppvar_sys children, sorted by name */
14	pp1250_s3: pp1250-s3 {
15		compatible = "regulator-fixed";
16		regulator-name = "pp1250_s3";
17
18		/* EC turns on w/ pp1250_s3_en; always on for AP */
19		regulator-always-on;
20		regulator-boot-on;
21		regulator-min-microvolt = <1250000>;
22		regulator-max-microvolt = <1250000>;
23
24		vin-supply = <&ppvar_sys>;
25	};
26
27	pp1250_cam: pp1250-dvdd {
28		compatible = "regulator-fixed";
29		regulator-name = "pp1250_dvdd";
30		pinctrl-names = "default";
31		pinctrl-0 = <&pp1250_cam_en>;
32
33		enable-active-high;
34		gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
35
36		/* 740us delay from gpio output high to pp1250 stable,
37		 * rounding up to 1ms for safety.
38		 */
39		startup-delay-us = <1000>;
40		vin-supply = <&pp1250_s3>;
41	};
42
43	pp900_s0: pp900-s0 {
44		compatible = "regulator-fixed";
45		regulator-name = "pp900_s0";
46
47		/* EC turns on w/ pp900_s0_en; always on for AP */
48		regulator-always-on;
49		regulator-boot-on;
50		regulator-min-microvolt = <900000>;
51		regulator-max-microvolt = <900000>;
52
53		vin-supply = <&ppvar_sys>;
54	};
55
56	ppvarn_lcd: ppvarn-lcd {
57		compatible = "regulator-fixed";
58		regulator-name = "ppvarn_lcd";
59		pinctrl-names = "default";
60		pinctrl-0 = <&ppvarn_lcd_en>;
61
62		enable-active-high;
63		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
64		vin-supply = <&ppvar_sys>;
65	};
66
67	ppvarp_lcd: ppvarp-lcd {
68		compatible = "regulator-fixed";
69		regulator-name = "ppvarp_lcd";
70		pinctrl-names = "default";
71		pinctrl-0 = <&ppvarp_lcd_en>;
72
73		enable-active-high;
74		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
75		vin-supply = <&ppvar_sys>;
76	};
77
78	/* pp1800 children, sorted by name */
79	pp900_s3: pp900-s3 {
80		compatible = "regulator-fixed";
81		regulator-name = "pp900_s3";
82
83		/* EC turns on w/ pp900_s3_en; always on for AP */
84		regulator-always-on;
85		regulator-boot-on;
86		regulator-min-microvolt = <900000>;
87		regulator-max-microvolt = <900000>;
88
89		vin-supply = <&pp1800>;
90	};
91
92	/* EC turns on pp1800_s3_en */
93	pp1800_s3: pp1800 {
94	};
95
96	/* pp3300 children, sorted by name */
97	pp2800_cam: pp2800-avdd {
98		compatible = "regulator-fixed";
99		regulator-name = "pp2800_avdd";
100		pinctrl-names = "default";
101		pinctrl-0 = <&pp2800_cam_en>;
102
103		enable-active-high;
104		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
105		startup-delay-us = <100>;
106		vin-supply = <&pp3300>;
107	};
108
109	/* EC turns on pp3300_s0_en */
110	pp3300_s0: pp3300 {
111	};
112
113	/* EC turns on pp3300_s3_en */
114	pp3300_s3: pp3300 {
115	};
116
117	/*
118	 * See b/66922012
119	 *
120	 * This is a hack to make sure the Bluetooth part of the QCA6174A
121	 * is reset at boot by toggling BT_EN. At boot BT_EN is first set
122	 * to low when the bt_3v3 regulator is registered (in disabled
123	 * state). The fake regulator is configured as a supply of the
124	 * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
125	 * the boot process it also enables its supply regulator bt_3v3,
126	 * which changes BT_EN to high.
127	 */
128	bt_3v3: bt-3v3 {
129		compatible = "regulator-fixed";
130		regulator-name = "bt_3v3";
131		pinctrl-names = "default";
132		pinctrl-0 = <&bt_en_1v8_l>;
133
134		enable-active-high;
135		gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
136		vin-supply = <&pp3300_s3>;
137	};
138
139	wlan_3v3: wlan-3v3 {
140		compatible = "regulator-fixed";
141		regulator-name = "wlan_3v3";
142		pinctrl-names = "default";
143		pinctrl-0 = <&wlan_pd_1v8_l>;
144
145		/*
146		 * The WL_EN pin is driven low when the regulator is
147		 * registered, and transitions to high when the PCIe bus
148		 * is powered up.
149		 */
150		enable-active-high;
151		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
152
153		/*
154		 * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
155		 * TODO (b/64444991): how long to assert PD#?
156		 */
157		regulator-enable-ramp-delay = <10000>;
158		/* See bt_3v3 hack above */
159		vin-supply = <&bt_3v3>;
160	};
161
162	backlight: backlight {
163		compatible = "pwm-backlight";
164		enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
165		pinctrl-names = "default";
166		pinctrl-0 = <&bl_en>;
167		pwms = <&pwm1 0 1000000 0>;
168		pwm-delay-us = <10000>;
169	};
170
171	dmic: dmic {
172		compatible = "dmic-codec";
173		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
174		pinctrl-names = "default";
175		pinctrl-0 = <&dmic_en>;
176		wakeup-delay-ms = <250>;
177	};
178
179	gpio_keys: gpio-keys {
180		compatible = "gpio-keys";
181		pinctrl-names = "default";
182		pinctrl-0 = <&pen_eject_odl>;
183
184		pen-insert {
185			label = "Pen Insert";
186			/* Insert = low, eject = high */
187			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
188			linux,code = <SW_PEN_INSERTED>;
189			linux,input-type = <EV_SW>;
190			wakeup-source;
191		};
192	};
193};
194
195/* pp900_s0 aliases */
196pp900_ddrpll_ap: &pp900_s0 {
197};
198pp900_pcie: &pp900_s0 {
199};
200pp900_usb: &pp900_s0 {
201};
202
203/* pp900_s3 aliases */
204pp900_emmcpll: &pp900_s3 {
205};
206
207/* EC turns on; alias for pp1800_s0 */
208pp1800_pcie: &pp1800_s0 {
209};
210
211/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
212&ppvar_bigcpu {
213	ctrl-voltage-range = <800074 1299226>;
214	regulator-min-microvolt = <800074>;
215	regulator-max-microvolt = <1299226>;
216};
217
218&ppvar_bigcpu_pwm {
219	/* On scarlet ppvar big cpu use pwm3 */
220	pwms = <&pwm3 0 3337 0>;
221	regulator-min-microvolt = <800074>;
222	regulator-max-microvolt = <1299226>;
223};
224
225&ppvar_litcpu {
226	ctrl-voltage-range = <802122 1199620>;
227	regulator-min-microvolt = <802122>;
228	regulator-max-microvolt = <1199620>;
229};
230
231&ppvar_litcpu_pwm {
232	regulator-min-microvolt = <802122>;
233	regulator-max-microvolt = <1199620>;
234};
235
236&ppvar_gpu {
237	ctrl-voltage-range = <799600 1099600>;
238	regulator-min-microvolt = <799600>;
239	regulator-max-microvolt = <1099600>;
240};
241
242&ppvar_gpu_pwm {
243	regulator-min-microvolt = <799600>;
244	regulator-max-microvolt = <1099600>;
245};
246
247&ppvar_sd_card_io {
248	states = <1800000 0x0 3300000 0x1>;
249	regulator-max-microvolt = <3300000>;
250};
251
252&pp3000_sd_slot {
253	vin-supply = <&pp3300>;
254};
255
256ap_i2c_dig: &i2c2 {
257	status = "okay";
258
259	clock-frequency = <400000>;
260
261	/* These are relatively safe rise/fall times. */
262	i2c-scl-falling-time-ns = <50>;
263	i2c-scl-rising-time-ns = <300>;
264
265	digitizer: digitizer@9 {
266		compatible = "hid-over-i2c";
267		reg = <0x9>;
268		interrupt-parent = <&gpio1>;
269		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
270		hid-descr-addr = <0x1>;
271		pinctrl-names = "default";
272		pinctrl-0 = <&pen_int_odl &pen_reset_l>;
273	};
274};
275
276&ap_i2c_ts {
277	touchscreen: touchscreen@10 {
278		compatible = "elan,ekth3500";
279		reg = <0x10>;
280		interrupt-parent = <&gpio1>;
281		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
282		pinctrl-names = "default";
283		pinctrl-0 = <&touch_int_l &touch_reset_l>;
284		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
285	};
286};
287
288camera: &i2c7 {
289	status = "okay";
290
291	clock-frequency = <400000>;
292
293	/* These are relatively safe rise/fall times; TODO: measure */
294	i2c-scl-falling-time-ns = <50>;
295	i2c-scl-rising-time-ns = <300>;
296
297	/* 24M mclk is shared between world and user cameras */
298	pinctrl-0 = <&i2c7_xfer &test_clkout1>;
299};
300
301&cdn_dp {
302	extcon = <&usbc_extcon0>;
303	phys = <&tcphy0_dp>;
304};
305
306&cpu_alert0 {
307	temperature = <66000>;
308};
309
310&cpu_alert1 {
311	temperature = <71000>;
312};
313
314&cros_ec {
315	interrupt-parent = <&gpio1>;
316	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
317};
318
319&cru {
320	assigned-clocks =
321		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
322		<&cru PLL_NPLL>,
323		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
324		<&cru PCLK_PERIHP>,
325		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
326		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
327		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
328		<&cru ACLK_VIO>,
329		<&cru ACLK_GIC_PRE>,
330		<&cru PCLK_DDR>,
331		<&cru ACLK_HDCP>;
332	assigned-clock-rates =
333		<600000000>, <1600000000>,
334		<1000000000>,
335		<150000000>, <75000000>,
336		<37500000>,
337		<100000000>, <100000000>,
338		<50000000>, <800000000>,
339		<100000000>, <50000000>,
340		<400000000>,
341		<200000000>,
342		<200000000>,
343		<400000000>;
344};
345
346&i2c_tunnel {
347	google,remote-bus = <0>;
348};
349
350&io_domains {
351	bt656-supply = <&pp1800_s0>;		/* APIO2_VDD;  2a 2b */
352	audio-supply = <&pp1800_s0>;		/* APIO5_VDD;  3d 4a */
353	gpio1830-supply = <&pp1800_s0>;		/* APIO4_VDD;  4c 4d */
354};
355
356&max98357a {
357	sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
358};
359
360&mipi_dsi {
361	status = "okay";
362	clock-master;
363
364	ports {
365		mipi_out: port@1 {
366			reg = <1>;
367
368			mipi_out_panel: endpoint {
369				remote-endpoint = <&mipi_in_panel>;
370			};
371		};
372	};
373
374	mipi_panel: panel@0 {
375		/* 2 different panels are used, compatibles are in dts files */
376		reg = <0>;
377		backlight = <&backlight>;
378		enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
379		pinctrl-names = "default";
380		pinctrl-0 = <&display_rst_l>;
381
382		ports {
383			#address-cells = <1>;
384			#size-cells = <0>;
385
386			port@0 {
387				reg = <0>;
388
389				mipi_in_panel: endpoint {
390					remote-endpoint = <&mipi_out_panel>;
391				};
392			};
393
394			port@1 {
395				reg = <1>;
396
397				mipi1_in_panel: endpoint@1 {
398					remote-endpoint = <&mipi1_out_panel>;
399				};
400			};
401		};
402	};
403};
404
405&mipi_dsi1 {
406	status = "okay";
407
408	ports {
409		mipi1_out: port@1 {
410			reg = <1>;
411
412			mipi1_out_panel: endpoint {
413				remote-endpoint = <&mipi1_in_panel>;
414			};
415		};
416	};
417};
418
419&pcie0 {
420	ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
421
422	/* PERST# asserted in S3 */
423	pcie-reset-suspend = <1>;
424
425	vpcie3v3-supply = <&wlan_3v3>;
426	vpcie1v8-supply = <&pp1800_pcie>;
427};
428
429&sdmmc {
430	cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
431};
432
433&sound {
434	rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
435};
436
437&spi2 {
438	status = "okay";
439};
440
441&usb_host0_ohci {
442	#address-cells = <1>;
443	#size-cells = <0>;
444
445	qca_bt: bluetooth@1 {
446		compatible = "usbcf3,e300", "usb4ca,301a";
447		reg = <1>;
448		pinctrl-names = "default";
449		pinctrl-0 = <&bt_host_wake_l>;
450		interrupt-parent = <&gpio1>;
451		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
452		interrupt-names = "wakeup";
453	};
454};
455
456/* PINCTRL OVERRIDES */
457&ec_ap_int_l {
458	rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
459};
460
461&ap_fw_wp {
462	rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
463};
464
465&bl_en {
466	rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>;
467};
468
469&bt_host_wake_l {
470	rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>;
471};
472
473&ec_ap_int_l {
474	rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
475};
476
477&headset_int_l {
478	rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>;
479};
480
481&i2s0_8ch_bus {
482	rockchip,pins =
483		<3 24 RK_FUNC_1 &pcfg_pull_none_6ma>,
484		<3 25 RK_FUNC_1 &pcfg_pull_none_6ma>,
485		<3 26 RK_FUNC_1 &pcfg_pull_none_6ma>,
486		<3 27 RK_FUNC_1 &pcfg_pull_none_6ma>,
487		<3 31 RK_FUNC_1 &pcfg_pull_none_6ma>,
488		<4 0 RK_FUNC_1 &pcfg_pull_none_6ma>;
489};
490
491/* there is no external pull up, so need to set this pin pull up */
492&sdmmc_cd_gpio {
493	rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>;
494};
495
496&sd_pwr_1800_sel {
497	rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>;
498};
499
500&sdmode_en {
501	rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>;
502};
503
504&touch_reset_l {
505	rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>;
506};
507
508&touch_int_l {
509	rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>;
510};
511
512&pinctrl {
513	pinctrl-0 = <
514		&ap_pwroff	/* AP will auto-assert this when in S3 */
515		&clk_32k	/* This pin is always 32k on gru boards */
516		&wlan_rf_kill_1v8_l
517	>;
518
519	pcfg_pull_none_6ma: pcfg-pull-none-6ma {
520		bias-disable;
521		drive-strength = <6>;
522	};
523
524	camera {
525		pp1250_cam_en: pp1250-dvdd {
526			rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
527		};
528
529		pp2800_cam_en: pp2800-avdd {
530			rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>;
531		};
532
533		ucam_rst: ucam_rst {
534			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
535		};
536
537		wcam_rst: wcam_rst {
538			rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
539		};
540	};
541
542	digitizer {
543		pen_int_odl: pen-int-odl {
544			rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>;
545		};
546
547		pen_reset_l: pen-reset-l {
548			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
549		};
550	};
551
552	discrete-regulators {
553		display_rst_l: display-rst-l {
554			rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>;
555		};
556
557		ppvarp_lcd_en: ppvarp-lcd-en {
558			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
559		};
560
561		ppvarn_lcd_en: ppvarn-lcd-en {
562			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
563		};
564	};
565
566	dmic {
567		dmic_en: dmic-en {
568			rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>;
569		};
570	};
571
572	pen {
573		pen_eject_odl: pen-eject-odl {
574			rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
575		};
576	};
577
578	tpm {
579		h1_int_od_l: h1-int-od-l {
580			rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>;
581		};
582	};
583};
584
585&wifi {
586	bt_en_1v8_l: bt-en-1v8-l {
587		rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
588	};
589
590	wlan_pd_1v8_l: wlan-pd-1v8-l {
591		rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
592	};
593
594	/* Default pull-up, but just to be clear */
595	wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
596		rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
597	};
598
599	wifi_perst_l: wifi-perst-l {
600		rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
601	};
602
603	wlan_host_wake_l: wlan-host-wake-l {
604		rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>;
605	};
606};
607