1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3399.dtsi"
10#include "rk3399-opp.dtsi"
11
12/ {
13	model = "Firefly-RK3399 Board";
14	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
15
16	chosen {
17		stdout-path = "serial2:1500000n8";
18	};
19
20	backlight: backlight {
21		compatible = "pwm-backlight";
22		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
23		pwms = <&pwm0 0 25000 0>;
24		brightness-levels = <
25			  0   1   2   3   4   5   6   7
26			  8   9  10  11  12  13  14  15
27			 16  17  18  19  20  21  22  23
28			 24  25  26  27  28  29  30  31
29			 32  33  34  35  36  37  38  39
30			 40  41  42  43  44  45  46  47
31			 48  49  50  51  52  53  54  55
32			 56  57  58  59  60  61  62  63
33			 64  65  66  67  68  69  70  71
34			 72  73  74  75  76  77  78  79
35			 80  81  82  83  84  85  86  87
36			 88  89  90  91  92  93  94  95
37			 96  97  98  99 100 101 102 103
38			104 105 106 107 108 109 110 111
39			112 113 114 115 116 117 118 119
40			120 121 122 123 124 125 126 127
41			128 129 130 131 132 133 134 135
42			136 137 138 139 140 141 142 143
43			144 145 146 147 148 149 150 151
44			152 153 154 155 156 157 158 159
45			160 161 162 163 164 165 166 167
46			168 169 170 171 172 173 174 175
47			176 177 178 179 180 181 182 183
48			184 185 186 187 188 189 190 191
49			192 193 194 195 196 197 198 199
50			200 201 202 203 204 205 206 207
51			208 209 210 211 212 213 214 215
52			216 217 218 219 220 221 222 223
53			224 225 226 227 228 229 230 231
54			232 233 234 235 236 237 238 239
55			240 241 242 243 244 245 246 247
56			248 249 250 251 252 253 254 255>;
57		default-brightness-level = <200>;
58	};
59
60	clkin_gmac: external-gmac-clock {
61		compatible = "fixed-clock";
62		clock-frequency = <125000000>;
63		clock-output-names = "clkin_gmac";
64		#clock-cells = <0>;
65	};
66
67	dc_12v: dc-12v {
68		compatible = "regulator-fixed";
69		regulator-name = "dc_12v";
70		regulator-always-on;
71		regulator-boot-on;
72		regulator-min-microvolt = <12000000>;
73		regulator-max-microvolt = <12000000>;
74	};
75
76	gpio-keys {
77		compatible = "gpio-keys";
78		autorepeat;
79		pinctrl-names = "default";
80		pinctrl-0 = <&pwrbtn>;
81
82		power {
83			debounce-interval = <100>;
84			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
85			label = "GPIO Key Power";
86			linux,code = <KEY_POWER>;
87			wakeup-source;
88		};
89	};
90
91	leds {
92		compatible = "gpio-leds";
93		pinctrl-names = "default";
94		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
95
96		work-led {
97			label = "work";
98			default-state = "on";
99			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
100		};
101
102		diy-led {
103			label = "diy";
104			default-state = "off";
105			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
106		};
107	};
108
109	rt5640-sound {
110		compatible = "simple-audio-card";
111		simple-audio-card,name = "rockchip,rt5640-codec";
112		simple-audio-card,format = "i2s";
113		simple-audio-card,mclk-fs = <256>;
114		simple-audio-card,widgets =
115			"Microphone", "Mic Jack",
116			"Headphone", "Headphone Jack";
117		simple-audio-card,routing =
118			"Mic Jack", "MICBIAS1",
119			"IN1P", "Mic Jack",
120			"Headphone Jack", "HPOL",
121			"Headphone Jack", "HPOR";
122
123		simple-audio-card,cpu {
124			sound-dai = <&i2s1>;
125		};
126
127		simple-audio-card,codec {
128			sound-dai = <&rt5640>;
129		};
130	};
131
132	sdio_pwrseq: sdio-pwrseq {
133		compatible = "mmc-pwrseq-simple";
134		clocks = <&rk808 1>;
135		clock-names = "ext_clock";
136		pinctrl-names = "default";
137		pinctrl-0 = <&wifi_enable_h>;
138
139		/*
140		 * On the module itself this is one of these (depending
141		 * on the actual card populated):
142		 * - SDIO_RESET_L_WL_REG_ON
143		 * - PDN (power down when low)
144		 */
145		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
146	};
147
148	/* switched by pmic_sleep */
149	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
150		compatible = "regulator-fixed";
151		regulator-name = "vcc1v8_s3";
152		regulator-always-on;
153		regulator-boot-on;
154		regulator-min-microvolt = <1800000>;
155		regulator-max-microvolt = <1800000>;
156		vin-supply = <&vcc_1v8>;
157	};
158
159	vcc3v3_pcie: vcc3v3-pcie-regulator {
160		compatible = "regulator-fixed";
161		enable-active-high;
162		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
163		pinctrl-names = "default";
164		pinctrl-0 = <&pcie_pwr_en>;
165		regulator-name = "vcc3v3_pcie";
166		regulator-always-on;
167		regulator-boot-on;
168		vin-supply = <&dc_12v>;
169	};
170
171	vcc3v3_sys: vcc3v3-sys {
172		compatible = "regulator-fixed";
173		regulator-name = "vcc3v3_sys";
174		regulator-always-on;
175		regulator-boot-on;
176		regulator-min-microvolt = <3300000>;
177		regulator-max-microvolt = <3300000>;
178		vin-supply = <&vcc_sys>;
179	};
180
181	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
182	vcc5v0_host: vcc5v0-host-regulator {
183		compatible = "regulator-fixed";
184		enable-active-high;
185		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
186		pinctrl-names = "default";
187		pinctrl-0 = <&vcc5v0_host_en>;
188		regulator-name = "vcc5v0_host";
189		regulator-always-on;
190		vin-supply = <&vcc_sys>;
191	};
192
193	vcc_sys: vcc-sys {
194		compatible = "regulator-fixed";
195		regulator-name = "vcc_sys";
196		regulator-always-on;
197		regulator-boot-on;
198		regulator-min-microvolt = <5000000>;
199		regulator-max-microvolt = <5000000>;
200		vin-supply = <&dc_12v>;
201	};
202
203	vdd_log: vdd-log {
204		compatible = "pwm-regulator";
205		pwms = <&pwm2 0 25000 1>;
206		regulator-name = "vdd_log";
207		regulator-always-on;
208		regulator-boot-on;
209		regulator-min-microvolt = <800000>;
210		regulator-max-microvolt = <1400000>;
211		vin-supply = <&vcc_sys>;
212	};
213};
214
215&cpu_l0 {
216	cpu-supply = <&vdd_cpu_l>;
217};
218
219&cpu_l1 {
220	cpu-supply = <&vdd_cpu_l>;
221};
222
223&cpu_l2 {
224	cpu-supply = <&vdd_cpu_l>;
225};
226
227&cpu_l3 {
228	cpu-supply = <&vdd_cpu_l>;
229};
230
231&cpu_b0 {
232	cpu-supply = <&vdd_cpu_b>;
233};
234
235&cpu_b1 {
236	cpu-supply = <&vdd_cpu_b>;
237};
238
239&emmc_phy {
240	status = "okay";
241};
242
243&gmac {
244	assigned-clocks = <&cru SCLK_RMII_SRC>;
245	assigned-clock-parents = <&clkin_gmac>;
246	clock_in_out = "input";
247	phy-supply = <&vcc_lan>;
248	phy-mode = "rgmii";
249	pinctrl-names = "default";
250	pinctrl-0 = <&rgmii_pins>;
251	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
252	snps,reset-active-low;
253	snps,reset-delays-us = <0 10000 50000>;
254	tx_delay = <0x28>;
255	rx_delay = <0x11>;
256	status = "okay";
257};
258
259&hdmi {
260	ddc-i2c-bus = <&i2c3>;
261	pinctrl-names = "default";
262	pinctrl-0 = <&hdmi_cec>;
263	status = "okay";
264};
265
266&i2c0 {
267	clock-frequency = <400000>;
268	i2c-scl-rising-time-ns = <168>;
269	i2c-scl-falling-time-ns = <4>;
270	status = "okay";
271
272	rk808: pmic@1b {
273		compatible = "rockchip,rk808";
274		reg = <0x1b>;
275		interrupt-parent = <&gpio1>;
276		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
277		#clock-cells = <1>;
278		clock-output-names = "xin32k", "rk808-clkout2";
279		pinctrl-names = "default";
280		pinctrl-0 = <&pmic_int_l>;
281		rockchip,system-power-controller;
282		wakeup-source;
283
284		vcc1-supply = <&vcc_sys>;
285		vcc2-supply = <&vcc_sys>;
286		vcc3-supply = <&vcc_sys>;
287		vcc4-supply = <&vcc_sys>;
288		vcc6-supply = <&vcc_sys>;
289		vcc7-supply = <&vcc_sys>;
290		vcc8-supply = <&vcc3v3_sys>;
291		vcc9-supply = <&vcc_sys>;
292		vcc10-supply = <&vcc_sys>;
293		vcc11-supply = <&vcc_sys>;
294		vcc12-supply = <&vcc3v3_sys>;
295		vddio-supply = <&vcc1v8_pmu>;
296
297		regulators {
298			vdd_center: DCDC_REG1 {
299				regulator-name = "vdd_center";
300				regulator-always-on;
301				regulator-boot-on;
302				regulator-min-microvolt = <750000>;
303				regulator-max-microvolt = <1350000>;
304				regulator-ramp-delay = <6001>;
305				regulator-state-mem {
306					regulator-off-in-suspend;
307				};
308			};
309
310			vdd_cpu_l: DCDC_REG2 {
311				regulator-name = "vdd_cpu_l";
312				regulator-always-on;
313				regulator-boot-on;
314				regulator-min-microvolt = <750000>;
315				regulator-max-microvolt = <1350000>;
316				regulator-ramp-delay = <6001>;
317				regulator-state-mem {
318					regulator-off-in-suspend;
319				};
320			};
321
322			vcc_ddr: DCDC_REG3 {
323				regulator-name = "vcc_ddr";
324				regulator-always-on;
325				regulator-boot-on;
326				regulator-state-mem {
327					regulator-on-in-suspend;
328				};
329			};
330
331			vcc_1v8: DCDC_REG4 {
332				regulator-name = "vcc_1v8";
333				regulator-always-on;
334				regulator-boot-on;
335				regulator-min-microvolt = <1800000>;
336				regulator-max-microvolt = <1800000>;
337				regulator-state-mem {
338					regulator-on-in-suspend;
339					regulator-suspend-microvolt = <1800000>;
340				};
341			};
342
343			vcc1v8_dvp: LDO_REG1 {
344				regulator-name = "vcc1v8_dvp";
345				regulator-always-on;
346				regulator-boot-on;
347				regulator-min-microvolt = <1800000>;
348				regulator-max-microvolt = <1800000>;
349				regulator-state-mem {
350					regulator-off-in-suspend;
351				};
352			};
353
354			vcc2v8_dvp: LDO_REG2 {
355				regulator-name = "vcc2v8_dvp";
356				regulator-always-on;
357				regulator-boot-on;
358				regulator-min-microvolt = <2800000>;
359				regulator-max-microvolt = <2800000>;
360				regulator-state-mem {
361					regulator-off-in-suspend;
362				};
363			};
364
365			vcc1v8_pmu: LDO_REG3 {
366				regulator-name = "vcc1v8_pmu";
367				regulator-always-on;
368				regulator-boot-on;
369				regulator-min-microvolt = <1800000>;
370				regulator-max-microvolt = <1800000>;
371				regulator-state-mem {
372					regulator-on-in-suspend;
373					regulator-suspend-microvolt = <1800000>;
374				};
375			};
376
377			vcc_sdio: LDO_REG4 {
378				regulator-name = "vcc_sdio";
379				regulator-always-on;
380				regulator-boot-on;
381				regulator-min-microvolt = <1800000>;
382				regulator-max-microvolt = <3000000>;
383				regulator-state-mem {
384					regulator-on-in-suspend;
385					regulator-suspend-microvolt = <3000000>;
386				};
387			};
388
389			vcca3v0_codec: LDO_REG5 {
390				regulator-name = "vcca3v0_codec";
391				regulator-always-on;
392				regulator-boot-on;
393				regulator-min-microvolt = <3000000>;
394				regulator-max-microvolt = <3000000>;
395				regulator-state-mem {
396					regulator-off-in-suspend;
397				};
398			};
399
400			vcc_1v5: LDO_REG6 {
401				regulator-name = "vcc_1v5";
402				regulator-always-on;
403				regulator-boot-on;
404				regulator-min-microvolt = <1500000>;
405				regulator-max-microvolt = <1500000>;
406				regulator-state-mem {
407					regulator-on-in-suspend;
408					regulator-suspend-microvolt = <1500000>;
409				};
410			};
411
412			vcca1v8_codec: LDO_REG7 {
413				regulator-name = "vcca1v8_codec";
414				regulator-always-on;
415				regulator-boot-on;
416				regulator-min-microvolt = <1800000>;
417				regulator-max-microvolt = <1800000>;
418				regulator-state-mem {
419					regulator-off-in-suspend;
420				};
421			};
422
423			vcc_3v0: LDO_REG8 {
424				regulator-name = "vcc_3v0";
425				regulator-always-on;
426				regulator-boot-on;
427				regulator-min-microvolt = <3000000>;
428				regulator-max-microvolt = <3000000>;
429				regulator-state-mem {
430					regulator-on-in-suspend;
431					regulator-suspend-microvolt = <3000000>;
432				};
433			};
434
435			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
436				regulator-name = "vcc3v3_s3";
437				regulator-always-on;
438				regulator-boot-on;
439				regulator-state-mem {
440					regulator-off-in-suspend;
441				};
442			};
443
444			vcc3v3_s0: SWITCH_REG2 {
445				regulator-name = "vcc3v3_s0";
446				regulator-always-on;
447				regulator-boot-on;
448				regulator-state-mem {
449					regulator-off-in-suspend;
450				};
451			};
452		};
453	};
454
455	vdd_cpu_b: regulator@40 {
456		compatible = "silergy,syr827";
457		reg = <0x40>;
458		fcs,suspend-voltage-selector = <0>;
459		regulator-name = "vdd_cpu_b";
460		regulator-min-microvolt = <712500>;
461		regulator-max-microvolt = <1500000>;
462		regulator-ramp-delay = <1000>;
463		regulator-always-on;
464		regulator-boot-on;
465		vin-supply = <&vcc_sys>;
466
467		regulator-state-mem {
468			regulator-off-in-suspend;
469		};
470	};
471
472	vdd_gpu: regulator@41 {
473		compatible = "silergy,syr828";
474		reg = <0x41>;
475		fcs,suspend-voltage-selector = <1>;
476		regulator-name = "vdd_gpu";
477		regulator-min-microvolt = <712500>;
478		regulator-max-microvolt = <1500000>;
479		regulator-ramp-delay = <1000>;
480		regulator-always-on;
481		regulator-boot-on;
482		vin-supply = <&vcc_sys>;
483
484		regulator-state-mem {
485			regulator-off-in-suspend;
486		};
487	};
488};
489
490&i2c1 {
491	i2c-scl-rising-time-ns = <300>;
492	i2c-scl-falling-time-ns = <15>;
493	status = "okay";
494
495	rt5640: rt5640@1c {
496		compatible = "realtek,rt5640";
497		reg = <0x1c>;
498		clocks = <&cru SCLK_I2S_8CH_OUT>;
499		clock-names = "mclk";
500		realtek,in1-differential;
501		#sound-dai-cells = <0>;
502		pinctrl-names = "default";
503		pinctrl-0 = <&rt5640_hpcon>;
504	};
505};
506
507&i2c3 {
508	i2c-scl-rising-time-ns = <450>;
509	i2c-scl-falling-time-ns = <15>;
510	status = "okay";
511};
512
513&i2c4 {
514	i2c-scl-rising-time-ns = <600>;
515	i2c-scl-falling-time-ns = <20>;
516	status = "okay";
517
518	accelerometer@68 {
519		compatible = "invensense,mpu6500";
520		reg = <0x68>;
521		interrupt-parent = <&gpio1>;
522		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
523	};
524};
525
526&i2s0 {
527	rockchip,playback-channels = <8>;
528	rockchip,capture-channels = <8>;
529	status = "okay";
530};
531
532&i2s1 {
533	rockchip,playback-channels = <2>;
534	rockchip,capture-channels = <2>;
535	status = "okay";
536};
537
538&i2s2 {
539	status = "okay";
540};
541
542&io_domains {
543	status = "okay";
544
545	bt656-supply = <&vcc1v8_dvp>;
546	audio-supply = <&vcca1v8_codec>;
547	sdmmc-supply = <&vcc_sdio>;
548	gpio1830-supply = <&vcc_3v0>;
549};
550
551&pcie_phy {
552	status = "okay";
553};
554
555&pcie0 {
556	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
557	num-lanes = <4>;
558	pinctrl-names = "default";
559	pinctrl-0 = <&pcie_clkreqn_cpm>;
560	status = "okay";
561};
562
563&pmu_io_domains {
564	pmu1830-supply = <&vcc_3v0>;
565	status = "okay";
566};
567
568&pinctrl {
569	buttons {
570		pwrbtn: pwrbtn {
571			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
572		};
573	};
574
575	lcd-panel {
576		lcd_panel_reset: lcd-panel-reset {
577			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
578		};
579	};
580
581	pcie {
582		pcie_pwr_en: pcie-pwr-en {
583			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
584		};
585
586		pcie_3g_drv: pcie-3g-drv {
587			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
588		};
589	};
590
591	pmic {
592		vsel1_gpio: vsel1-gpio {
593			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
594		};
595
596		vsel2_gpio: vsel2-gpio {
597			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
598		};
599	};
600
601	sdio-pwrseq {
602		wifi_enable_h: wifi-enable-h {
603			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
604		};
605	};
606
607	rt5640 {
608		rt5640_hpcon: rt5640-hpcon {
609			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
610		};
611	};
612
613	pmic {
614		pmic_int_l: pmic-int-l {
615			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
616		};
617	};
618
619	usb2 {
620		vcc5v0_host_en: vcc5v0-host-en {
621			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
622		};
623	};
624
625	wifi {
626		wifi_host_wake_l: wifi-host-wake-l {
627			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
628		};
629	};
630
631	leds {
632		work_led_gpio: work_led-gpio {
633			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
634		};
635
636		diy_led_gpio: diy_led-gpio {
637			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
638		};
639	};
640};
641
642&pwm0 {
643	status = "okay";
644};
645
646&pwm2 {
647	status = "okay";
648};
649
650&saradc {
651	vref-supply = <&vcca1v8_s3>;
652	status = "okay";
653};
654
655&sdio0 {
656	/* WiFi & BT combo module Ampak AP6356S */
657	bus-width = <4>;
658	cap-sdio-irq;
659	cap-sd-highspeed;
660	keep-power-in-suspend;
661	mmc-pwrseq = <&sdio_pwrseq>;
662	non-removable;
663	num-slots = <1>;
664	pinctrl-names = "default";
665	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
666	sd-uhs-sdr104;
667
668	/* Power supply */
669	vqmmc-supply = &vcc1v8_s3;	/* IO line */
670	vmmc-supply = &vcc_sdio;	/* card's power */
671
672	status = "okay";
673
674	brcmf: wifi@1 {
675		compatible = "brcm,bcm4329-fmac";
676		interrupt-parent = <&gpio0>;
677		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
678		interrupt-names = "host-wake";
679		brcm,drive-strength = <5>;
680		pinctrl-names = "default";
681		pinctrl-0 = <&wifi_host_wake_l>;
682	};
683};
684
685&sdmmc {
686	bus-width = <4>;
687	cap-mmc-highspeed;
688	cap-sd-highspeed;
689	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
690	disable-wp;
691	max-frequency = <150000000>;
692	pinctrl-names = "default";
693	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
694	status = "okay";
695};
696
697&sdhci {
698	bus-width = <8>;
699	mmc-hs400-1_8v;
700	mmc-hs400-enhanced-strobe;
701	non-removable;
702	status = "okay";
703};
704
705&tcphy0 {
706	status = "okay";
707};
708
709&tcphy1 {
710	status = "okay";
711};
712
713&tsadc {
714	/* tshut mode 0:CRU 1:GPIO */
715	rockchip,hw-tshut-mode = <1>;
716	/* tshut polarity 0:LOW 1:HIGH */
717	rockchip,hw-tshut-polarity = <1>;
718	status = "okay";
719};
720
721&u2phy0 {
722	status = "okay";
723
724	u2phy0_otg: otg-port {
725		status = "okay";
726	};
727
728	u2phy0_host: host-port {
729		phy-supply = <&vcc5v0_host>;
730		status = "okay";
731	};
732};
733
734&u2phy1 {
735	status = "okay";
736
737	u2phy1_otg: otg-port {
738		status = "okay";
739	};
740
741	u2phy1_host: host-port {
742		phy-supply = <&vcc5v0_host>;
743		status = "okay";
744	};
745};
746
747&uart0 {
748	pinctrl-names = "default";
749	pinctrl-0 = <&uart0_xfer &uart0_cts>;
750	status = "okay";
751};
752
753&uart2 {
754	status = "okay";
755};
756
757&usb_host0_ehci {
758	status = "okay";
759};
760
761&usb_host0_ohci {
762	status = "okay";
763};
764
765&usb_host1_ehci {
766	status = "okay";
767};
768
769&usb_host1_ohci {
770	status = "okay";
771};
772
773&usbdrd3_0 {
774	status = "okay";
775};
776
777&usbdrd_dwc3_0 {
778	status = "okay";
779	dr_mode = "otg";
780};
781
782&usbdrd3_1 {
783	status = "okay";
784};
785
786&usbdrd_dwc3_1 {
787	status = "okay";
788	dr_mode = "host";
789};
790
791&vopb {
792	status = "okay";
793};
794
795&vopb_mmu {
796	status = "okay";
797};
798
799&vopl {
800	status = "okay";
801};
802
803&vopl_mmu {
804	status = "okay";
805};
806