1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd 4 */ 5 6/dts-v1/; 7#include "rk3328.dtsi" 8 9/ { 10 model = "Rockchip RK3328 EVB"; 11 compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; 12 13 chosen { 14 stdout-path = "serial2:1500000n8"; 15 }; 16 17 dc_12v: dc-12v { 18 compatible = "regulator-fixed"; 19 regulator-name = "dc_12v"; 20 regulator-always-on; 21 regulator-boot-on; 22 regulator-min-microvolt = <12000000>; 23 regulator-max-microvolt = <12000000>; 24 }; 25 26 sdio_pwrseq: sdio-pwrseq { 27 compatible = "mmc-pwrseq-simple"; 28 pinctrl-names = "default"; 29 pinctrl-0 = <&wifi_enable_h>; 30 31 /* 32 * On the module itself this is one of these (depending 33 * on the actual card populated): 34 * - SDIO_RESET_L_WL_REG_ON 35 * - PDN (power down when low) 36 */ 37 reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; 38 }; 39 40 vcc_sd: sdmmc-regulator { 41 compatible = "regulator-fixed"; 42 gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; 43 pinctrl-names = "default"; 44 pinctrl-0 = <&sdmmc0m1_gpio>; 45 regulator-name = "vcc_sd"; 46 regulator-min-microvolt = <3300000>; 47 regulator-max-microvolt = <3300000>; 48 vin-supply = <&vcc_io>; 49 }; 50 51 vcc_sys: vcc-sys { 52 compatible = "regulator-fixed"; 53 regulator-name = "vcc_sys"; 54 regulator-always-on; 55 regulator-boot-on; 56 regulator-min-microvolt = <5000000>; 57 regulator-max-microvolt = <5000000>; 58 vin-supply = <&dc_12v>; 59 }; 60 61 vcc_phy: vcc-phy-regulator { 62 compatible = "regulator-fixed"; 63 regulator-name = "vcc_phy"; 64 regulator-always-on; 65 regulator-boot-on; 66 }; 67}; 68 69&cpu0 { 70 cpu-supply = <&vdd_arm>; 71}; 72 73&emmc { 74 bus-width = <8>; 75 cap-mmc-highspeed; 76 non-removable; 77 pinctrl-names = "default"; 78 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; 79 status = "okay"; 80}; 81 82&gmac2phy { 83 phy-supply = <&vcc_phy>; 84 clock_in_out = "output"; 85 assigned-clocks = <&cru SCLK_MAC2PHY_SRC>; 86 assigned-clock-rate = <50000000>; 87 assigned-clocks = <&cru SCLK_MAC2PHY>; 88 assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; 89 90}; 91 92&i2c1 { 93 status = "okay"; 94 95 rk805: rk805@18 { 96 compatible = "rockchip,rk805"; 97 reg = <0x18>; 98 interrupt-parent = <&gpio2>; 99 interrupts = <6 IRQ_TYPE_LEVEL_LOW>; 100 #clock-cells = <1>; 101 clock-output-names = "xin32k", "rk805-clkout2"; 102 gpio-controller; 103 #gpio-cells = <2>; 104 pinctrl-names = "default"; 105 pinctrl-0 = <&pmic_int_l>; 106 rockchip,system-power-controller; 107 wakeup-source; 108 109 vcc1-supply = <&vcc_sys>; 110 vcc2-supply = <&vcc_sys>; 111 vcc3-supply = <&vcc_sys>; 112 vcc4-supply = <&vcc_sys>; 113 vcc5-supply = <&vcc_io>; 114 vcc6-supply = <&vcc_io>; 115 116 regulators { 117 vdd_logic: DCDC_REG1 { 118 regulator-name = "vdd_logic"; 119 regulator-min-microvolt = <712500>; 120 regulator-max-microvolt = <1450000>; 121 regulator-always-on; 122 regulator-boot-on; 123 regulator-state-mem { 124 regulator-on-in-suspend; 125 regulator-suspend-microvolt = <1000000>; 126 }; 127 }; 128 129 vdd_arm: DCDC_REG2 { 130 regulator-name = "vdd_arm"; 131 regulator-min-microvolt = <712500>; 132 regulator-max-microvolt = <1450000>; 133 regulator-always-on; 134 regulator-boot-on; 135 regulator-state-mem { 136 regulator-on-in-suspend; 137 regulator-suspend-microvolt = <950000>; 138 }; 139 }; 140 141 vcc_ddr: DCDC_REG3 { 142 regulator-name = "vcc_ddr"; 143 regulator-always-on; 144 regulator-boot-on; 145 regulator-state-mem { 146 regulator-on-in-suspend; 147 }; 148 }; 149 150 vcc_io: DCDC_REG4 { 151 regulator-name = "vcc_io"; 152 regulator-min-microvolt = <3300000>; 153 regulator-max-microvolt = <3300000>; 154 regulator-always-on; 155 regulator-boot-on; 156 regulator-state-mem { 157 regulator-on-in-suspend; 158 regulator-suspend-microvolt = <3300000>; 159 }; 160 }; 161 162 vcc_18: LDO_REG1 { 163 regulator-name = "vcc_18"; 164 regulator-min-microvolt = <1800000>; 165 regulator-max-microvolt = <1800000>; 166 regulator-always-on; 167 regulator-boot-on; 168 regulator-state-mem { 169 regulator-on-in-suspend; 170 regulator-suspend-microvolt = <1800000>; 171 }; 172 }; 173 174 vcc18_emmc: LDO_REG2 { 175 regulator-name = "vcc18_emmc"; 176 regulator-min-microvolt = <1800000>; 177 regulator-max-microvolt = <1800000>; 178 regulator-always-on; 179 regulator-boot-on; 180 regulator-state-mem { 181 regulator-on-in-suspend; 182 regulator-suspend-microvolt = <1800000>; 183 }; 184 }; 185 186 vdd_10: LDO_REG3 { 187 regulator-name = "vdd_10"; 188 regulator-min-microvolt = <1000000>; 189 regulator-max-microvolt = <1000000>; 190 regulator-always-on; 191 regulator-boot-on; 192 regulator-state-mem { 193 regulator-on-in-suspend; 194 regulator-suspend-microvolt = <1000000>; 195 }; 196 }; 197 }; 198 }; 199}; 200 201&pinctrl { 202 pmic { 203 pmic_int_l: pmic-int-l { 204 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; 205 }; 206 }; 207 208 sdio-pwrseq { 209 wifi_enable_h: wifi-enable-h { 210 rockchip,pins = 211 <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 212 }; 213 }; 214}; 215 216&sdio { 217 bus-width = <4>; 218 cap-sd-highspeed; 219 cap-sdio-irq; 220 keep-power-in-suspend; 221 max-frequency = <150000000>; 222 mmc-pwrseq = <&sdio_pwrseq>; 223 non-removable; 224 pinctrl-names = "default"; 225 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; 226 status = "okay"; 227}; 228 229&sdmmc { 230 bus-width = <4>; 231 cap-mmc-highspeed; 232 cap-sd-highspeed; 233 disable-wp; 234 max-frequency = <150000000>; 235 pinctrl-names = "default"; 236 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; 237 vmmc-supply = <&vcc_sd>; 238 status = "okay"; 239}; 240 241&tsadc { 242 status = "okay"; 243}; 244 245&uart2 { 246 status = "okay"; 247}; 248 249&u2phy { 250 status = "okay"; 251}; 252 253&u2phy_host { 254 status = "okay"; 255}; 256 257&u2phy_otg { 258 status = "okay"; 259}; 260 261&usb20_otg { 262 status = "okay"; 263}; 264 265&usb_host0_ehci { 266 status = "okay"; 267}; 268 269&usb_host0_ohci { 270 status = "okay"; 271}; 272