1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the R-Car Gen3 ULCB board 4 * 5 * Copyright (C) 2016 Renesas Electronics Corp. 6 * Copyright (C) 2016 Cogent Embedded, Inc. 7 */ 8 9/* 10 * SSI-AK4613 11 * aplay -D plughw:0,0 xxx.wav 12 * arecord -D plughw:0,0 xxx.wav 13 * SSI-HDMI 14 * aplay -D plughw:0,1 xxx.wav 15 */ 16 17#include <dt-bindings/gpio/gpio.h> 18#include <dt-bindings/input/input.h> 19 20/ { 21 model = "Renesas R-Car Gen3 ULCB board"; 22 23 aliases { 24 serial0 = &scif2; 25 ethernet0 = &avb; 26 }; 27 28 chosen { 29 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 30 stdout-path = "serial0:115200n8"; 31 }; 32 33 audio_clkout: audio-clkout { 34 /* 35 * This is same as <&rcar_sound 0> 36 * but needed to avoid cs2000/rcar_sound probe dead-lock 37 */ 38 compatible = "fixed-clock"; 39 #clock-cells = <0>; 40 clock-frequency = <12288000>; 41 }; 42 43 hdmi0-out { 44 compatible = "hdmi-connector"; 45 type = "a"; 46 47 port { 48 hdmi0_con: endpoint { 49 }; 50 }; 51 }; 52 53 keyboard { 54 compatible = "gpio-keys"; 55 56 key-1 { 57 linux,code = <KEY_1>; 58 label = "SW3"; 59 wakeup-source; 60 debounce-interval = <20>; 61 gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; 62 }; 63 }; 64 65 leds { 66 compatible = "gpio-leds"; 67 68 led5 { 69 gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; 70 }; 71 led6 { 72 gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; 73 }; 74 }; 75 76 reg_1p8v: regulator0 { 77 compatible = "regulator-fixed"; 78 regulator-name = "fixed-1.8V"; 79 regulator-min-microvolt = <1800000>; 80 regulator-max-microvolt = <1800000>; 81 regulator-boot-on; 82 regulator-always-on; 83 }; 84 85 reg_3p3v: regulator1 { 86 compatible = "regulator-fixed"; 87 regulator-name = "fixed-3.3V"; 88 regulator-min-microvolt = <3300000>; 89 regulator-max-microvolt = <3300000>; 90 regulator-boot-on; 91 regulator-always-on; 92 }; 93 94 sound_card: sound { 95 compatible = "audio-graph-card"; 96 label = "rcar-sound"; 97 98 dais = <&rsnd_port0 /* ak4613 */ 99 &rsnd_port1 /* HDMI0 */ 100 >; 101 }; 102 103 vcc_sdhi0: regulator-vcc-sdhi0 { 104 compatible = "regulator-fixed"; 105 106 regulator-name = "SDHI0 Vcc"; 107 regulator-min-microvolt = <3300000>; 108 regulator-max-microvolt = <3300000>; 109 110 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; 111 enable-active-high; 112 }; 113 114 vccq_sdhi0: regulator-vccq-sdhi0 { 115 compatible = "regulator-gpio"; 116 117 regulator-name = "SDHI0 VccQ"; 118 regulator-min-microvolt = <1800000>; 119 regulator-max-microvolt = <3300000>; 120 121 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; 122 gpios-states = <1>; 123 states = <3300000 1>, <1800000 0>; 124 }; 125 126 x12_clk: x12 { 127 compatible = "fixed-clock"; 128 #clock-cells = <0>; 129 clock-frequency = <24576000>; 130 }; 131 132 x23_clk: x23-clock { 133 compatible = "fixed-clock"; 134 #clock-cells = <0>; 135 clock-frequency = <25000000>; 136 }; 137}; 138 139&audio_clk_a { 140 clock-frequency = <22579200>; 141}; 142 143&avb { 144 pinctrl-0 = <&avb_pins>; 145 pinctrl-names = "default"; 146 phy-handle = <&phy0>; 147 phy-mode = "rgmii-txid"; 148 status = "okay"; 149 150 phy0: ethernet-phy@0 { 151 rxc-skew-ps = <1500>; 152 reg = <0>; 153 interrupt-parent = <&gpio2>; 154 interrupts = <11 IRQ_TYPE_LEVEL_LOW>; 155 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; 156 }; 157}; 158 159&du { 160 status = "okay"; 161}; 162 163&ehci1 { 164 status = "okay"; 165}; 166 167&extal_clk { 168 clock-frequency = <16666666>; 169}; 170 171&extalr_clk { 172 clock-frequency = <32768>; 173}; 174 175&hdmi0 { 176 status = "okay"; 177 178 ports { 179 port@1 { 180 reg = <1>; 181 rcar_dw_hdmi0_out: endpoint { 182 remote-endpoint = <&hdmi0_con>; 183 }; 184 }; 185 port@2 { 186 reg = <2>; 187 dw_hdmi0_snd_in: endpoint { 188 remote-endpoint = <&rsnd_for_hdmi>; 189 }; 190 }; 191 }; 192}; 193 194&hdmi0_con { 195 remote-endpoint = <&rcar_dw_hdmi0_out>; 196}; 197 198&i2c2 { 199 pinctrl-0 = <&i2c2_pins>; 200 pinctrl-names = "default"; 201 202 status = "okay"; 203 204 clock-frequency = <100000>; 205 206 ak4613: codec@10 { 207 compatible = "asahi-kasei,ak4613"; 208 #sound-dai-cells = <0>; 209 reg = <0x10>; 210 clocks = <&rcar_sound 3>; 211 212 asahi-kasei,in1-single-end; 213 asahi-kasei,in2-single-end; 214 asahi-kasei,out1-single-end; 215 asahi-kasei,out2-single-end; 216 asahi-kasei,out3-single-end; 217 asahi-kasei,out4-single-end; 218 asahi-kasei,out5-single-end; 219 asahi-kasei,out6-single-end; 220 221 port { 222 ak4613_endpoint: endpoint { 223 remote-endpoint = <&rsnd_for_ak4613>; 224 }; 225 }; 226 }; 227 228 cs2000: clk-multiplier@4f { 229 #clock-cells = <0>; 230 compatible = "cirrus,cs2000-cp"; 231 reg = <0x4f>; 232 clocks = <&audio_clkout>, <&x12_clk>; 233 clock-names = "clk_in", "ref_clk"; 234 235 assigned-clocks = <&cs2000>; 236 assigned-clock-rates = <24576000>; /* 1/1 divide */ 237 }; 238}; 239 240&i2c4 { 241 status = "okay"; 242 243 clock-frequency = <400000>; 244 245 versaclock5: clock-generator@6a { 246 compatible = "idt,5p49v5925"; 247 reg = <0x6a>; 248 #clock-cells = <1>; 249 clocks = <&x23_clk>; 250 clock-names = "xin"; 251 }; 252}; 253 254&i2c_dvfs { 255 status = "okay"; 256 257 clock-frequency = <400000>; 258 259 pmic: pmic@30 { 260 pinctrl-0 = <&irq0_pins>; 261 pinctrl-names = "default"; 262 263 compatible = "rohm,bd9571mwv"; 264 reg = <0x30>; 265 interrupt-parent = <&intc_ex>; 266 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 267 interrupt-controller; 268 #interrupt-cells = <2>; 269 gpio-controller; 270 #gpio-cells = <2>; 271 rohm,ddr-backup-power = <0xf>; 272 rohm,rstbmode-pulse; 273 274 regulators { 275 dvfs: dvfs { 276 regulator-name = "dvfs"; 277 regulator-min-microvolt = <750000>; 278 regulator-max-microvolt = <1030000>; 279 regulator-boot-on; 280 regulator-always-on; 281 }; 282 }; 283 }; 284}; 285 286&ohci1 { 287 status = "okay"; 288}; 289 290&pfc { 291 pinctrl-0 = <&scif_clk_pins>; 292 pinctrl-names = "default"; 293 294 avb_pins: avb { 295 mux { 296 groups = "avb_link", "avb_mdio", "avb_mii"; 297 function = "avb"; 298 }; 299 300 pins_mdio { 301 groups = "avb_mdio"; 302 drive-strength = <24>; 303 }; 304 305 pins_mii_tx { 306 pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", 307 "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; 308 drive-strength = <12>; 309 }; 310 }; 311 312 i2c2_pins: i2c2 { 313 groups = "i2c2_a"; 314 function = "i2c2"; 315 }; 316 317 irq0_pins: irq0 { 318 groups = "intc_ex_irq0"; 319 function = "intc_ex"; 320 }; 321 322 scif2_pins: scif2 { 323 groups = "scif2_data_a"; 324 function = "scif2"; 325 }; 326 327 scif_clk_pins: scif_clk { 328 groups = "scif_clk_a"; 329 function = "scif_clk"; 330 }; 331 332 sdhi0_pins: sd0 { 333 groups = "sdhi0_data4", "sdhi0_ctrl"; 334 function = "sdhi0"; 335 power-source = <3300>; 336 }; 337 338 sdhi0_pins_uhs: sd0_uhs { 339 groups = "sdhi0_data4", "sdhi0_ctrl"; 340 function = "sdhi0"; 341 power-source = <1800>; 342 }; 343 344 sdhi2_pins: sd2 { 345 groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; 346 function = "sdhi2"; 347 power-source = <1800>; 348 }; 349 350 sound_pins: sound { 351 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; 352 function = "ssi"; 353 }; 354 355 sound_clk_pins: sound-clk { 356 groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", 357 "audio_clkout_a", "audio_clkout3_a"; 358 function = "audio_clk"; 359 }; 360 361 usb1_pins: usb1 { 362 groups = "usb1"; 363 function = "usb1"; 364 }; 365}; 366 367&rcar_sound { 368 pinctrl-0 = <&sound_pins &sound_clk_pins>; 369 pinctrl-names = "default"; 370 371 /* Single DAI */ 372 #sound-dai-cells = <0>; 373 374 /* audio_clkout0/1/2/3 */ 375 #clock-cells = <1>; 376 clock-frequency = <12288000 11289600>; 377 378 status = "okay"; 379 380 /* update <audio_clk_b> to <cs2000> */ 381 clocks = <&cpg CPG_MOD 1005>, 382 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, 383 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, 384 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, 385 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, 386 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, 387 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, 388 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, 389 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, 390 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, 391 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, 392 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, 393 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, 394 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, 395 <&audio_clk_a>, <&cs2000>, 396 <&audio_clk_c>, 397 <&cpg CPG_CORE CPG_AUDIO_CLK_I>; 398 399 ports { 400 #address-cells = <1>; 401 #size-cells = <0>; 402 rsnd_port0: port@0 { 403 reg = <0>; 404 rsnd_for_ak4613: endpoint { 405 remote-endpoint = <&ak4613_endpoint>; 406 407 dai-format = "left_j"; 408 bitclock-master = <&rsnd_for_ak4613>; 409 frame-master = <&rsnd_for_ak4613>; 410 411 playback = <&ssi0 &src0 &dvc0>; 412 capture = <&ssi1 &src1 &dvc1>; 413 }; 414 }; 415 rsnd_port1: port@1 { 416 reg = <1>; 417 rsnd_for_hdmi: endpoint { 418 remote-endpoint = <&dw_hdmi0_snd_in>; 419 420 dai-format = "i2s"; 421 bitclock-master = <&rsnd_for_hdmi>; 422 frame-master = <&rsnd_for_hdmi>; 423 424 playback = <&ssi2>; 425 }; 426 }; 427 }; 428}; 429 430&rwdt { 431 timeout-sec = <60>; 432 status = "okay"; 433}; 434 435&scif2 { 436 pinctrl-0 = <&scif2_pins>; 437 pinctrl-names = "default"; 438 439 status = "okay"; 440}; 441 442&scif_clk { 443 clock-frequency = <14745600>; 444}; 445 446&sdhi0 { 447 pinctrl-0 = <&sdhi0_pins>; 448 pinctrl-1 = <&sdhi0_pins_uhs>; 449 pinctrl-names = "default", "state_uhs"; 450 451 vmmc-supply = <&vcc_sdhi0>; 452 vqmmc-supply = <&vccq_sdhi0>; 453 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; 454 bus-width = <4>; 455 sd-uhs-sdr50; 456 sd-uhs-sdr104; 457 status = "okay"; 458}; 459 460&sdhi2 { 461 /* used for on-board 8bit eMMC */ 462 pinctrl-0 = <&sdhi2_pins>; 463 pinctrl-1 = <&sdhi2_pins>; 464 pinctrl-names = "default", "state_uhs"; 465 466 vmmc-supply = <®_3p3v>; 467 vqmmc-supply = <®_1p8v>; 468 bus-width = <8>; 469 mmc-hs200-1_8v; 470 mmc-hs400-1_8v; 471 non-removable; 472 status = "okay"; 473}; 474 475&ssi1 { 476 shared-pin; 477}; 478 479&usb2_phy1 { 480 pinctrl-0 = <&usb1_pins>; 481 pinctrl-names = "default"; 482 483 status = "okay"; 484}; 485