1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the Draak board 4 * 5 * Copyright (C) 2016-2018 Renesas Electronics Corp. 6 * Copyright (C) 2017 Glider bvba 7 */ 8 9/dts-v1/; 10#include "r8a77995.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12 13/ { 14 model = "Renesas Draak board based on r8a77995"; 15 compatible = "renesas,draak", "renesas,r8a77995"; 16 17 aliases { 18 serial0 = &scif2; 19 ethernet0 = &avb; 20 }; 21 22 backlight: backlight { 23 compatible = "pwm-backlight"; 24 pwms = <&pwm1 0 50000>; 25 26 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; 27 default-brightness-level = <10>; 28 29 power-supply = <®_12p0v>; 30 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; 31 }; 32 33 chosen { 34 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 35 stdout-path = "serial0:115200n8"; 36 }; 37 38 composite-in { 39 compatible = "composite-video-connector"; 40 41 port { 42 composite_con_in: endpoint { 43 remote-endpoint = <&adv7180_in>; 44 }; 45 }; 46 }; 47 48 hdmi-in { 49 compatible = "hdmi-connector"; 50 type = "a"; 51 52 port { 53 hdmi_con_in: endpoint { 54 remote-endpoint = <&adv7612_in>; 55 }; 56 }; 57 }; 58 59 hdmi-out { 60 compatible = "hdmi-connector"; 61 type = "a"; 62 63 port { 64 hdmi_con_out: endpoint { 65 remote-endpoint = <&adv7511_out>; 66 }; 67 }; 68 }; 69 70 lvds-decoder { 71 compatible = "thine,thc63lvd1024"; 72 vcc-supply = <®_3p3v>; 73 74 ports { 75 #address-cells = <1>; 76 #size-cells = <0>; 77 78 port@0 { 79 reg = <0>; 80 thc63lvd1024_in: endpoint { 81 remote-endpoint = <&lvds0_out>; 82 }; 83 }; 84 85 port@2 { 86 reg = <2>; 87 thc63lvd1024_out: endpoint { 88 remote-endpoint = <&adv7511_in>; 89 }; 90 }; 91 }; 92 }; 93 94 memory@48000000 { 95 device_type = "memory"; 96 /* first 128MB is reserved for secure area. */ 97 reg = <0x0 0x48000000 0x0 0x18000000>; 98 }; 99 100 reg_1p8v: regulator-1p8v { 101 compatible = "regulator-fixed"; 102 regulator-name = "fixed-1.8V"; 103 regulator-min-microvolt = <1800000>; 104 regulator-max-microvolt = <1800000>; 105 regulator-boot-on; 106 regulator-always-on; 107 }; 108 109 reg_3p3v: regulator-3p3v { 110 compatible = "regulator-fixed"; 111 regulator-name = "fixed-3.3V"; 112 regulator-min-microvolt = <3300000>; 113 regulator-max-microvolt = <3300000>; 114 regulator-boot-on; 115 regulator-always-on; 116 }; 117 118 reg_12p0v: regulator-12p0v { 119 compatible = "regulator-fixed"; 120 regulator-name = "D12.0V"; 121 regulator-min-microvolt = <12000000>; 122 regulator-max-microvolt = <12000000>; 123 regulator-boot-on; 124 regulator-always-on; 125 }; 126 127 vga { 128 compatible = "vga-connector"; 129 130 port { 131 vga_in: endpoint { 132 remote-endpoint = <&adv7123_out>; 133 }; 134 }; 135 }; 136 137 vga-encoder { 138 compatible = "adi,adv7123"; 139 140 ports { 141 #address-cells = <1>; 142 #size-cells = <0>; 143 144 port@0 { 145 reg = <0>; 146 adv7123_in: endpoint { 147 remote-endpoint = <&du_out_rgb>; 148 }; 149 }; 150 port@1 { 151 reg = <1>; 152 adv7123_out: endpoint { 153 remote-endpoint = <&vga_in>; 154 }; 155 }; 156 }; 157 }; 158 159 x12_clk: x12 { 160 compatible = "fixed-clock"; 161 #clock-cells = <0>; 162 clock-frequency = <74250000>; 163 }; 164}; 165 166&avb { 167 pinctrl-0 = <&avb0_pins>; 168 pinctrl-names = "default"; 169 renesas,no-ether-link; 170 phy-handle = <&phy0>; 171 status = "okay"; 172 173 phy0: ethernet-phy@0 { 174 rxc-skew-ps = <1500>; 175 reg = <0>; 176 interrupt-parent = <&gpio5>; 177 interrupts = <19 IRQ_TYPE_LEVEL_LOW>; 178 /* 179 * TX clock internal delay mode is required for reliable 180 * 1Gbps communication using the KSZ9031RNX phy present on 181 * the Draak board, however, TX clock internal delay mode 182 * isn't supported on r8a77995. Thus, limit speed to 183 * 100Mbps for reliable communication. 184 */ 185 max-speed = <100>; 186 }; 187}; 188 189&can0 { 190 pinctrl-0 = <&can0_pins>; 191 pinctrl-names = "default"; 192 status = "okay"; 193}; 194 195&can1 { 196 pinctrl-0 = <&can1_pins>; 197 pinctrl-names = "default"; 198 status = "okay"; 199}; 200 201&du { 202 pinctrl-0 = <&du_pins>; 203 pinctrl-names = "default"; 204 status = "okay"; 205 206 clocks = <&cpg CPG_MOD 724>, 207 <&cpg CPG_MOD 723>, 208 <&x12_clk>; 209 clock-names = "du.0", "du.1", "dclkin.0"; 210 211 ports { 212 port@0 { 213 endpoint { 214 remote-endpoint = <&adv7123_in>; 215 }; 216 }; 217 }; 218}; 219 220&ehci0 { 221 dr_mode = "host"; 222 status = "okay"; 223}; 224 225&extal_clk { 226 clock-frequency = <48000000>; 227}; 228 229&hsusb { 230 dr_mode = "host"; 231 status = "okay"; 232}; 233 234&i2c0 { 235 pinctrl-0 = <&i2c0_pins>; 236 pinctrl-names = "default"; 237 status = "okay"; 238 239 composite-in@20 { 240 compatible = "adi,adv7180cp"; 241 reg = <0x20>; 242 243 ports { 244 #address-cells = <1>; 245 #size-cells = <0>; 246 247 port@0 { 248 reg = <0>; 249 adv7180_in: endpoint { 250 remote-endpoint = <&composite_con_in>; 251 }; 252 }; 253 254 port@3 { 255 reg = <3>; 256 257 /* 258 * The VIN4 video input path is shared between 259 * CVBS and HDMI inputs through SW[49-53] 260 * switches. 261 * 262 * CVBS is the default selection, link it to 263 * VIN4 here. 264 */ 265 adv7180_out: endpoint { 266 remote-endpoint = <&vin4_in>; 267 }; 268 }; 269 }; 270 271 }; 272 273 hdmi-encoder@39 { 274 compatible = "adi,adv7511w"; 275 reg = <0x39>, <0x3f>, <0x3c>, <0x38>; 276 reg-names = "main", "edid", "cec", "packet"; 277 interrupt-parent = <&gpio1>; 278 interrupts = <28 IRQ_TYPE_LEVEL_LOW>; 279 280 /* Depends on LVDS */ 281 max-clock = <135000000>; 282 min-vrefresh = <50>; 283 284 adi,input-depth = <8>; 285 adi,input-colorspace = "rgb"; 286 adi,input-clock = "1x"; 287 288 ports { 289 #address-cells = <1>; 290 #size-cells = <0>; 291 292 port@0 { 293 reg = <0>; 294 adv7511_in: endpoint { 295 remote-endpoint = <&thc63lvd1024_out>; 296 }; 297 }; 298 299 port@1 { 300 reg = <1>; 301 adv7511_out: endpoint { 302 remote-endpoint = <&hdmi_con_out>; 303 }; 304 }; 305 }; 306 }; 307 308 hdmi-decoder@4c { 309 compatible = "adi,adv7612"; 310 reg = <0x4c>; 311 default-input = <0>; 312 313 ports { 314 #address-cells = <1>; 315 #size-cells = <0>; 316 317 port@0 { 318 reg = <0>; 319 320 adv7612_in: endpoint { 321 remote-endpoint = <&hdmi_con_in>; 322 }; 323 }; 324 325 port@2 { 326 reg = <2>; 327 328 /* 329 * The VIN4 video input path is shared between 330 * CVBS and HDMI inputs through SW[49-53] 331 * switches. 332 * 333 * CVBS is the default selection, leave HDMI 334 * not connected here. 335 */ 336 adv7612_out: endpoint { 337 pclk-sample = <0>; 338 hsync-active = <0>; 339 vsync-active = <0>; 340 }; 341 }; 342 }; 343 }; 344 345 eeprom@50 { 346 compatible = "rohm,br24t01", "atmel,24c01"; 347 reg = <0x50>; 348 pagesize = <8>; 349 }; 350}; 351 352&i2c1 { 353 pinctrl-0 = <&i2c1_pins>; 354 pinctrl-names = "default"; 355 status = "okay"; 356}; 357 358&lvds0 { 359 status = "okay"; 360 361 clocks = <&cpg CPG_MOD 727>, 362 <&x12_clk>, 363 <&extal_clk>; 364 clock-names = "fck", "dclkin.0", "extal"; 365 366 ports { 367 port@1 { 368 lvds0_out: endpoint { 369 remote-endpoint = <&thc63lvd1024_in>; 370 }; 371 }; 372 }; 373}; 374 375&lvds1 { 376 /* 377 * Even though the LVDS1 output is not connected, the encoder must be 378 * enabled to supply a pixel clock to the DU for the DPAD output when 379 * LVDS0 is in use. 380 */ 381 status = "okay"; 382 383 clocks = <&cpg CPG_MOD 727>, 384 <&x12_clk>, 385 <&extal_clk>; 386 clock-names = "fck", "dclkin.0", "extal"; 387}; 388 389&ohci0 { 390 dr_mode = "host"; 391 status = "okay"; 392}; 393 394&pfc { 395 avb0_pins: avb { 396 groups = "avb0_link", "avb0_mdio", "avb0_mii"; 397 function = "avb0"; 398 }; 399 400 can0_pins: can0 { 401 groups = "can0_data_a"; 402 function = "can0"; 403 }; 404 405 can1_pins: can1 { 406 groups = "can1_data_a"; 407 function = "can1"; 408 }; 409 410 du_pins: du { 411 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; 412 function = "du"; 413 }; 414 415 i2c0_pins: i2c0 { 416 groups = "i2c0"; 417 function = "i2c0"; 418 }; 419 420 i2c1_pins: i2c1 { 421 groups = "i2c1"; 422 function = "i2c1"; 423 }; 424 425 pwm0_pins: pwm0 { 426 groups = "pwm0_c"; 427 function = "pwm0"; 428 }; 429 430 pwm1_pins: pwm1 { 431 groups = "pwm1_c"; 432 function = "pwm1"; 433 }; 434 435 scif2_pins: scif2 { 436 groups = "scif2_data"; 437 function = "scif2"; 438 }; 439 440 sdhi2_pins: sd2 { 441 groups = "mmc_data8", "mmc_ctrl"; 442 function = "mmc"; 443 power-source = <1800>; 444 }; 445 446 sdhi2_pins_uhs: sd2_uhs { 447 groups = "mmc_data8", "mmc_ctrl"; 448 function = "mmc"; 449 power-source = <1800>; 450 }; 451 452 usb0_pins: usb0 { 453 groups = "usb0"; 454 function = "usb0"; 455 }; 456 457 vin4_pins_cvbs: vin4 { 458 groups = "vin4_data8", "vin4_sync", "vin4_clk"; 459 function = "vin4"; 460 }; 461}; 462 463&pwm0 { 464 pinctrl-0 = <&pwm0_pins>; 465 pinctrl-names = "default"; 466 467 status = "okay"; 468}; 469 470&pwm1 { 471 pinctrl-0 = <&pwm1_pins>; 472 pinctrl-names = "default"; 473 474 status = "okay"; 475}; 476 477&rwdt { 478 timeout-sec = <60>; 479 status = "okay"; 480}; 481 482&scif2 { 483 pinctrl-0 = <&scif2_pins>; 484 pinctrl-names = "default"; 485 486 status = "okay"; 487}; 488 489&sdhi2 { 490 /* used for on-board eMMC */ 491 pinctrl-0 = <&sdhi2_pins>; 492 pinctrl-1 = <&sdhi2_pins_uhs>; 493 pinctrl-names = "default", "state_uhs"; 494 495 vmmc-supply = <®_3p3v>; 496 vqmmc-supply = <®_1p8v>; 497 bus-width = <8>; 498 mmc-hs200-1_8v; 499 non-removable; 500 status = "okay"; 501}; 502 503&usb2_phy0 { 504 pinctrl-0 = <&usb0_pins>; 505 pinctrl-names = "default"; 506 507 renesas,no-otg-pins; 508 status = "okay"; 509}; 510 511&vin4 { 512 pinctrl-0 = <&vin4_pins_cvbs>; 513 pinctrl-names = "default"; 514 515 status = "okay"; 516 517 ports { 518 port { 519 vin4_in: endpoint { 520 remote-endpoint = <&adv7180_out>; 521 }; 522 }; 523 }; 524}; 525