xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sm8550.dtsi (revision 6548d543)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6#include <dt-bindings/clock/qcom,rpmh.h>
7#include <dt-bindings/clock/qcom,sm8450-videocc.h>
8#include <dt-bindings/clock/qcom,sm8550-gcc.h>
9#include <dt-bindings/clock/qcom,sm8550-gpucc.h>
10#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
11#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
12#include <dt-bindings/dma/qcom-gpi.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/interrupt-controller/arm-gic.h>
15#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
16#include <dt-bindings/mailbox/qcom-ipcc.h>
17#include <dt-bindings/power/qcom-rpmpd.h>
18#include <dt-bindings/power/qcom,rpmhpd.h>
19#include <dt-bindings/soc/qcom,gpr.h>
20#include <dt-bindings/soc/qcom,rpmh-rsc.h>
21#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
22#include <dt-bindings/phy/phy-qcom-qmp.h>
23#include <dt-bindings/thermal/thermal.h>
24
25/ {
26	interrupt-parent = <&intc>;
27
28	#address-cells = <2>;
29	#size-cells = <2>;
30
31	chosen { };
32
33	clocks {
34		xo_board: xo-board {
35			compatible = "fixed-clock";
36			#clock-cells = <0>;
37		};
38
39		sleep_clk: sleep-clk {
40			compatible = "fixed-clock";
41			#clock-cells = <0>;
42		};
43
44		bi_tcxo_div2: bi-tcxo-div2-clk {
45			#clock-cells = <0>;
46			compatible = "fixed-factor-clock";
47			clocks = <&rpmhcc RPMH_CXO_CLK>;
48			clock-mult = <1>;
49			clock-div = <2>;
50		};
51
52		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
53			#clock-cells = <0>;
54			compatible = "fixed-factor-clock";
55			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
56			clock-mult = <1>;
57			clock-div = <2>;
58		};
59
60		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
61			compatible = "fixed-clock";
62			#clock-cells = <0>;
63		};
64	};
65
66	cpus {
67		#address-cells = <2>;
68		#size-cells = <0>;
69
70		CPU0: cpu@0 {
71			device_type = "cpu";
72			compatible = "arm,cortex-a510";
73			reg = <0 0>;
74			clocks = <&cpufreq_hw 0>;
75			enable-method = "psci";
76			next-level-cache = <&L2_0>;
77			power-domains = <&CPU_PD0>;
78			power-domain-names = "psci";
79			qcom,freq-domain = <&cpufreq_hw 0>;
80			capacity-dmips-mhz = <1024>;
81			dynamic-power-coefficient = <100>;
82			#cooling-cells = <2>;
83			L2_0: l2-cache {
84				compatible = "cache";
85				cache-level = <2>;
86				cache-unified;
87				next-level-cache = <&L3_0>;
88				L3_0: l3-cache {
89					compatible = "cache";
90					cache-level = <3>;
91					cache-unified;
92				};
93			};
94		};
95
96		CPU1: cpu@100 {
97			device_type = "cpu";
98			compatible = "arm,cortex-a510";
99			reg = <0 0x100>;
100			clocks = <&cpufreq_hw 0>;
101			enable-method = "psci";
102			next-level-cache = <&L2_100>;
103			power-domains = <&CPU_PD1>;
104			power-domain-names = "psci";
105			qcom,freq-domain = <&cpufreq_hw 0>;
106			capacity-dmips-mhz = <1024>;
107			dynamic-power-coefficient = <100>;
108			#cooling-cells = <2>;
109			L2_100: l2-cache {
110				compatible = "cache";
111				cache-level = <2>;
112				cache-unified;
113				next-level-cache = <&L3_0>;
114			};
115		};
116
117		CPU2: cpu@200 {
118			device_type = "cpu";
119			compatible = "arm,cortex-a510";
120			reg = <0 0x200>;
121			clocks = <&cpufreq_hw 0>;
122			enable-method = "psci";
123			next-level-cache = <&L2_200>;
124			power-domains = <&CPU_PD2>;
125			power-domain-names = "psci";
126			qcom,freq-domain = <&cpufreq_hw 0>;
127			capacity-dmips-mhz = <1024>;
128			dynamic-power-coefficient = <100>;
129			#cooling-cells = <2>;
130			L2_200: l2-cache {
131				compatible = "cache";
132				cache-level = <2>;
133				cache-unified;
134				next-level-cache = <&L3_0>;
135			};
136		};
137
138		CPU3: cpu@300 {
139			device_type = "cpu";
140			compatible = "arm,cortex-a715";
141			reg = <0 0x300>;
142			clocks = <&cpufreq_hw 1>;
143			enable-method = "psci";
144			next-level-cache = <&L2_300>;
145			power-domains = <&CPU_PD3>;
146			power-domain-names = "psci";
147			qcom,freq-domain = <&cpufreq_hw 1>;
148			capacity-dmips-mhz = <1792>;
149			dynamic-power-coefficient = <270>;
150			#cooling-cells = <2>;
151			L2_300: l2-cache {
152				compatible = "cache";
153				cache-level = <2>;
154				cache-unified;
155				next-level-cache = <&L3_0>;
156			};
157		};
158
159		CPU4: cpu@400 {
160			device_type = "cpu";
161			compatible = "arm,cortex-a715";
162			reg = <0 0x400>;
163			clocks = <&cpufreq_hw 1>;
164			enable-method = "psci";
165			next-level-cache = <&L2_400>;
166			power-domains = <&CPU_PD4>;
167			power-domain-names = "psci";
168			qcom,freq-domain = <&cpufreq_hw 1>;
169			capacity-dmips-mhz = <1792>;
170			dynamic-power-coefficient = <270>;
171			#cooling-cells = <2>;
172			L2_400: l2-cache {
173				compatible = "cache";
174				cache-level = <2>;
175				cache-unified;
176				next-level-cache = <&L3_0>;
177			};
178		};
179
180		CPU5: cpu@500 {
181			device_type = "cpu";
182			compatible = "arm,cortex-a710";
183			reg = <0 0x500>;
184			clocks = <&cpufreq_hw 1>;
185			enable-method = "psci";
186			next-level-cache = <&L2_500>;
187			power-domains = <&CPU_PD5>;
188			power-domain-names = "psci";
189			qcom,freq-domain = <&cpufreq_hw 1>;
190			capacity-dmips-mhz = <1792>;
191			dynamic-power-coefficient = <270>;
192			#cooling-cells = <2>;
193			L2_500: l2-cache {
194				compatible = "cache";
195				cache-level = <2>;
196				cache-unified;
197				next-level-cache = <&L3_0>;
198			};
199		};
200
201		CPU6: cpu@600 {
202			device_type = "cpu";
203			compatible = "arm,cortex-a710";
204			reg = <0 0x600>;
205			clocks = <&cpufreq_hw 1>;
206			enable-method = "psci";
207			next-level-cache = <&L2_600>;
208			power-domains = <&CPU_PD6>;
209			power-domain-names = "psci";
210			qcom,freq-domain = <&cpufreq_hw 1>;
211			capacity-dmips-mhz = <1792>;
212			dynamic-power-coefficient = <270>;
213			#cooling-cells = <2>;
214			L2_600: l2-cache {
215				compatible = "cache";
216				cache-level = <2>;
217				cache-unified;
218				next-level-cache = <&L3_0>;
219			};
220		};
221
222		CPU7: cpu@700 {
223			device_type = "cpu";
224			compatible = "arm,cortex-x3";
225			reg = <0 0x700>;
226			clocks = <&cpufreq_hw 2>;
227			enable-method = "psci";
228			next-level-cache = <&L2_700>;
229			power-domains = <&CPU_PD7>;
230			power-domain-names = "psci";
231			qcom,freq-domain = <&cpufreq_hw 2>;
232			capacity-dmips-mhz = <1894>;
233			dynamic-power-coefficient = <588>;
234			#cooling-cells = <2>;
235			L2_700: l2-cache {
236				compatible = "cache";
237				cache-level = <2>;
238				cache-unified;
239				next-level-cache = <&L3_0>;
240			};
241		};
242
243		cpu-map {
244			cluster0 {
245				core0 {
246					cpu = <&CPU0>;
247				};
248
249				core1 {
250					cpu = <&CPU1>;
251				};
252
253				core2 {
254					cpu = <&CPU2>;
255				};
256
257				core3 {
258					cpu = <&CPU3>;
259				};
260
261				core4 {
262					cpu = <&CPU4>;
263				};
264
265				core5 {
266					cpu = <&CPU5>;
267				};
268
269				core6 {
270					cpu = <&CPU6>;
271				};
272
273				core7 {
274					cpu = <&CPU7>;
275				};
276			};
277		};
278
279		idle-states {
280			entry-method = "psci";
281
282			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
283				compatible = "arm,idle-state";
284				idle-state-name = "silver-rail-power-collapse";
285				arm,psci-suspend-param = <0x40000004>;
286				entry-latency-us = <550>;
287				exit-latency-us = <750>;
288				min-residency-us = <6700>;
289				local-timer-stop;
290			};
291
292			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
293				compatible = "arm,idle-state";
294				idle-state-name = "gold-rail-power-collapse";
295				arm,psci-suspend-param = <0x40000004>;
296				entry-latency-us = <600>;
297				exit-latency-us = <1300>;
298				min-residency-us = <8136>;
299				local-timer-stop;
300			};
301
302			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
303				compatible = "arm,idle-state";
304				idle-state-name = "goldplus-rail-power-collapse";
305				arm,psci-suspend-param = <0x40000004>;
306				entry-latency-us = <500>;
307				exit-latency-us = <1350>;
308				min-residency-us = <7480>;
309				local-timer-stop;
310			};
311		};
312
313		domain-idle-states {
314			CLUSTER_SLEEP_0: cluster-sleep-0 {
315				compatible = "domain-idle-state";
316				arm,psci-suspend-param = <0x41000044>;
317				entry-latency-us = <750>;
318				exit-latency-us = <2350>;
319				min-residency-us = <9144>;
320			};
321
322			CLUSTER_SLEEP_1: cluster-sleep-1 {
323				compatible = "domain-idle-state";
324				arm,psci-suspend-param = <0x4100c344>;
325				entry-latency-us = <2800>;
326				exit-latency-us = <4400>;
327				min-residency-us = <10150>;
328			};
329		};
330	};
331
332	firmware {
333		scm: scm {
334			compatible = "qcom,scm-sm8550", "qcom,scm";
335			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
336		};
337	};
338
339	clk_virt: interconnect-0 {
340		compatible = "qcom,sm8550-clk-virt";
341		#interconnect-cells = <2>;
342		qcom,bcm-voters = <&apps_bcm_voter>;
343	};
344
345	mc_virt: interconnect-1 {
346		compatible = "qcom,sm8550-mc-virt";
347		#interconnect-cells = <2>;
348		qcom,bcm-voters = <&apps_bcm_voter>;
349	};
350
351	memory@a0000000 {
352		device_type = "memory";
353		/* We expect the bootloader to fill in the size */
354		reg = <0 0xa0000000 0 0>;
355	};
356
357	pmu {
358		compatible = "arm,armv8-pmuv3";
359		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
360	};
361
362	psci {
363		compatible = "arm,psci-1.0";
364		method = "smc";
365
366		CPU_PD0: power-domain-cpu0 {
367			#power-domain-cells = <0>;
368			power-domains = <&CLUSTER_PD>;
369			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
370		};
371
372		CPU_PD1: power-domain-cpu1 {
373			#power-domain-cells = <0>;
374			power-domains = <&CLUSTER_PD>;
375			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
376		};
377
378		CPU_PD2: power-domain-cpu2 {
379			#power-domain-cells = <0>;
380			power-domains = <&CLUSTER_PD>;
381			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
382		};
383
384		CPU_PD3: power-domain-cpu3 {
385			#power-domain-cells = <0>;
386			power-domains = <&CLUSTER_PD>;
387			domain-idle-states = <&BIG_CPU_SLEEP_0>;
388		};
389
390		CPU_PD4: power-domain-cpu4 {
391			#power-domain-cells = <0>;
392			power-domains = <&CLUSTER_PD>;
393			domain-idle-states = <&BIG_CPU_SLEEP_0>;
394		};
395
396		CPU_PD5: power-domain-cpu5 {
397			#power-domain-cells = <0>;
398			power-domains = <&CLUSTER_PD>;
399			domain-idle-states = <&BIG_CPU_SLEEP_0>;
400		};
401
402		CPU_PD6: power-domain-cpu6 {
403			#power-domain-cells = <0>;
404			power-domains = <&CLUSTER_PD>;
405			domain-idle-states = <&BIG_CPU_SLEEP_0>;
406		};
407
408		CPU_PD7: power-domain-cpu7 {
409			#power-domain-cells = <0>;
410			power-domains = <&CLUSTER_PD>;
411			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
412		};
413
414		CLUSTER_PD: power-domain-cluster {
415			#power-domain-cells = <0>;
416			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
417		};
418	};
419
420	reserved_memory: reserved-memory {
421		#address-cells = <2>;
422		#size-cells = <2>;
423		ranges;
424
425		hyp_mem: hyp-region@80000000 {
426			reg = <0 0x80000000 0 0xa00000>;
427			no-map;
428		};
429
430		cpusys_vm_mem: cpusys-vm-region@80a00000 {
431			reg = <0 0x80a00000 0 0x400000>;
432			no-map;
433		};
434
435		hyp_tags_mem: hyp-tags-region@80e00000 {
436			reg = <0 0x80e00000 0 0x3d0000>;
437			no-map;
438		};
439
440		xbl_sc_mem: xbl-sc-region@d8100000 {
441			reg = <0 0xd8100000 0 0x40000>;
442			no-map;
443		};
444
445		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
446			reg = <0 0x811d0000 0 0x30000>;
447			no-map;
448		};
449
450		/* merged xbl_dt_log, xbl_ramdump, aop_image */
451		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
452			reg = <0 0x81a00000 0 0x260000>;
453			no-map;
454		};
455
456		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
457			compatible = "qcom,cmd-db";
458			reg = <0 0x81c60000 0 0x20000>;
459			no-map;
460		};
461
462		/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
463		aop_config_merged_mem: aop-config-merged-region@81c80000 {
464			reg = <0 0x81c80000 0 0x74000>;
465			no-map;
466		};
467
468		/* secdata region can be reused by apps */
469		smem: smem@81d00000 {
470			compatible = "qcom,smem";
471			reg = <0 0x81d00000 0 0x200000>;
472			hwlocks = <&tcsr_mutex 3>;
473			no-map;
474		};
475
476		adsp_mhi_mem: adsp-mhi-region@81f00000 {
477			reg = <0 0x81f00000 0 0x20000>;
478			no-map;
479		};
480
481		global_sync_mem: global-sync-region@82600000 {
482			reg = <0 0x82600000 0 0x100000>;
483			no-map;
484		};
485
486		tz_stat_mem: tz-stat-region@82700000 {
487			reg = <0 0x82700000 0 0x100000>;
488			no-map;
489		};
490
491		cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
492			reg = <0 0x82800000 0 0x4600000>;
493			no-map;
494		};
495
496		mpss_mem: mpss-region@8a800000 {
497			reg = <0 0x8a800000 0 0x10800000>;
498			no-map;
499		};
500
501		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
502			reg = <0 0x9b000000 0 0x80000>;
503			no-map;
504		};
505
506		ipa_fw_mem: ipa-fw-region@9b080000 {
507			reg = <0 0x9b080000 0 0x10000>;
508			no-map;
509		};
510
511		ipa_gsi_mem: ipa-gsi-region@9b090000 {
512			reg = <0 0x9b090000 0 0xa000>;
513			no-map;
514		};
515
516		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
517			reg = <0 0x9b09a000 0 0x2000>;
518			no-map;
519		};
520
521		spss_region_mem: spss-region@9b100000 {
522			reg = <0 0x9b100000 0 0x180000>;
523			no-map;
524		};
525
526		/* First part of the "SPU secure shared memory" region */
527		spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
528			reg = <0 0x9b280000 0 0x60000>;
529			no-map;
530		};
531
532		/* Second part of the "SPU secure shared memory" region */
533		spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
534			reg = <0 0x9b2e0000 0 0x20000>;
535			no-map;
536		};
537
538		camera_mem: camera-region@9b300000 {
539			reg = <0 0x9b300000 0 0x800000>;
540			no-map;
541		};
542
543		video_mem: video-region@9bb00000 {
544			reg = <0 0x9bb00000 0 0x700000>;
545			no-map;
546		};
547
548		cvp_mem: cvp-region@9c200000 {
549			reg = <0 0x9c200000 0 0x700000>;
550			no-map;
551		};
552
553		cdsp_mem: cdsp-region@9c900000 {
554			reg = <0 0x9c900000 0 0x2000000>;
555			no-map;
556		};
557
558		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
559			reg = <0 0x9e900000 0 0x80000>;
560			no-map;
561		};
562
563		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
564			reg = <0 0x9e980000 0 0x80000>;
565			no-map;
566		};
567
568		adspslpi_mem: adspslpi-region@9ea00000 {
569			reg = <0 0x9ea00000 0 0x4080000>;
570			no-map;
571		};
572
573		/* uefi region can be reused by apps */
574
575		/* Linux kernel image is loaded at 0xa8000000 */
576
577		rmtfs_mem: rmtfs-region@d4a80000 {
578			compatible = "qcom,rmtfs-mem";
579			reg = <0x0 0xd4a80000 0x0 0x280000>;
580			no-map;
581
582			qcom,client-id = <1>;
583			qcom,vmid = <15>;
584		};
585
586		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
587			reg = <0 0xd4d00000 0 0x3300000>;
588			no-map;
589		};
590
591		tz_reserved_mem: tz-reserved-region@d8000000 {
592			reg = <0 0xd8000000 0 0x100000>;
593			no-map;
594		};
595
596		cpucp_fw_mem: cpucp-fw-region@d8140000 {
597			reg = <0 0xd8140000 0 0x1c0000>;
598			no-map;
599		};
600
601		qtee_mem: qtee-region@d8300000 {
602			reg = <0 0xd8300000 0 0x500000>;
603			no-map;
604		};
605
606		ta_mem: ta-region@d8800000 {
607			reg = <0 0xd8800000 0 0x8a00000>;
608			no-map;
609		};
610
611		tz_tags_mem: tz-tags-region@e1200000 {
612			reg = <0 0xe1200000 0 0x2740000>;
613			no-map;
614		};
615
616		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
617			reg = <0 0xe6440000 0 0x279000>;
618			no-map;
619		};
620
621		trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
622			reg = <0 0xf3600000 0 0x4aee000>;
623			no-map;
624		};
625
626		trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
627			reg = <0 0xf80ee000 0 0x1000>;
628			no-map;
629		};
630
631		trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
632			reg = <0 0xf80ef000 0 0x9000>;
633			no-map;
634		};
635
636		trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
637			reg = <0 0xf80f8000 0 0x4000>;
638			no-map;
639		};
640
641		trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
642			reg = <0 0xf80fc000 0 0x4000>;
643			no-map;
644		};
645
646		trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
647			reg = <0 0xf8100000 0 0x100000>;
648			no-map;
649		};
650
651		oem_vm_mem: oem-vm-region@f8400000 {
652			reg = <0 0xf8400000 0 0x4800000>;
653			no-map;
654		};
655
656		oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
657			reg = <0 0xfcc00000 0 0x4000>;
658			no-map;
659		};
660
661		oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
662			reg = <0 0xfcc04000 0 0x100000>;
663			no-map;
664		};
665
666		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
667			reg = <0 0xfce00000 0 0x2900000>;
668			no-map;
669		};
670
671		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
672			reg = <0 0xff700000 0 0x100000>;
673			no-map;
674		};
675	};
676
677	smp2p-adsp {
678		compatible = "qcom,smp2p";
679		qcom,smem = <443>, <429>;
680		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
681					     IPCC_MPROC_SIGNAL_SMP2P
682					     IRQ_TYPE_EDGE_RISING>;
683		mboxes = <&ipcc IPCC_CLIENT_LPASS
684				IPCC_MPROC_SIGNAL_SMP2P>;
685
686		qcom,local-pid = <0>;
687		qcom,remote-pid = <2>;
688
689		smp2p_adsp_out: master-kernel {
690			qcom,entry-name = "master-kernel";
691			#qcom,smem-state-cells = <1>;
692		};
693
694		smp2p_adsp_in: slave-kernel {
695			qcom,entry-name = "slave-kernel";
696			interrupt-controller;
697			#interrupt-cells = <2>;
698		};
699	};
700
701	smp2p-cdsp {
702		compatible = "qcom,smp2p";
703		qcom,smem = <94>, <432>;
704		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
705					     IPCC_MPROC_SIGNAL_SMP2P
706					     IRQ_TYPE_EDGE_RISING>;
707		mboxes = <&ipcc IPCC_CLIENT_CDSP
708				IPCC_MPROC_SIGNAL_SMP2P>;
709
710		qcom,local-pid = <0>;
711		qcom,remote-pid = <5>;
712
713		smp2p_cdsp_out: master-kernel {
714			qcom,entry-name = "master-kernel";
715			#qcom,smem-state-cells = <1>;
716		};
717
718		smp2p_cdsp_in: slave-kernel {
719			qcom,entry-name = "slave-kernel";
720			interrupt-controller;
721			#interrupt-cells = <2>;
722		};
723	};
724
725	smp2p-modem {
726		compatible = "qcom,smp2p";
727		qcom,smem = <435>, <428>;
728		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
729					     IPCC_MPROC_SIGNAL_SMP2P
730					     IRQ_TYPE_EDGE_RISING>;
731		mboxes = <&ipcc IPCC_CLIENT_MPSS
732				IPCC_MPROC_SIGNAL_SMP2P>;
733
734		qcom,local-pid = <0>;
735		qcom,remote-pid = <1>;
736
737		smp2p_modem_out: master-kernel {
738			qcom,entry-name = "master-kernel";
739			#qcom,smem-state-cells = <1>;
740		};
741
742		smp2p_modem_in: slave-kernel {
743			qcom,entry-name = "slave-kernel";
744			interrupt-controller;
745			#interrupt-cells = <2>;
746		};
747
748		ipa_smp2p_out: ipa-ap-to-modem {
749			qcom,entry-name = "ipa";
750			#qcom,smem-state-cells = <1>;
751		};
752
753		ipa_smp2p_in: ipa-modem-to-ap {
754			qcom,entry-name = "ipa";
755			interrupt-controller;
756			#interrupt-cells = <2>;
757		};
758	};
759
760	soc: soc@0 {
761		compatible = "simple-bus";
762		ranges = <0 0 0 0 0x10 0>;
763		dma-ranges = <0 0 0 0 0x10 0>;
764
765		#address-cells = <2>;
766		#size-cells = <2>;
767
768		gcc: clock-controller@100000 {
769			compatible = "qcom,sm8550-gcc";
770			reg = <0 0x00100000 0 0x1f4200>;
771			#clock-cells = <1>;
772			#reset-cells = <1>;
773			#power-domain-cells = <1>;
774			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
775				 <&pcie0_phy>,
776				 <&pcie1_phy>,
777				 <&pcie_1_phy_aux_clk>,
778				 <&ufs_mem_phy 0>,
779				 <&ufs_mem_phy 1>,
780				 <&ufs_mem_phy 2>,
781				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
782		};
783
784		ipcc: mailbox@408000 {
785			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
786			reg = <0 0x00408000 0 0x1000>;
787			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
788			interrupt-controller;
789			#interrupt-cells = <3>;
790			#mbox-cells = <2>;
791		};
792
793		gpi_dma2: dma-controller@800000 {
794			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
795			#dma-cells = <3>;
796			reg = <0 0x00800000 0 0x60000>;
797			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
798				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
799				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
800				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
801				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
802				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
803				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
804				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
805				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
806				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
807				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
808				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
809			dma-channels = <12>;
810			dma-channel-mask = <0x3e>;
811			iommus = <&apps_smmu 0x436 0>;
812			status = "disabled";
813		};
814
815		qupv3_id_1: geniqup@8c0000 {
816			compatible = "qcom,geni-se-qup";
817			reg = <0 0x008c0000 0 0x2000>;
818			ranges;
819			clock-names = "m-ahb", "s-ahb";
820			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
821				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
822			iommus = <&apps_smmu 0x423 0>;
823			#address-cells = <2>;
824			#size-cells = <2>;
825			status = "disabled";
826
827			i2c8: i2c@880000 {
828				compatible = "qcom,geni-i2c";
829				reg = <0 0x00880000 0 0x4000>;
830				clock-names = "se";
831				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
832				pinctrl-names = "default";
833				pinctrl-0 = <&qup_i2c8_data_clk>;
834				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
835				#address-cells = <1>;
836				#size-cells = <0>;
837				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
838						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
839						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
840				interconnect-names = "qup-core", "qup-config", "qup-memory";
841				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
842				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
843				dma-names = "tx", "rx";
844				status = "disabled";
845			};
846
847			spi8: spi@880000 {
848				compatible = "qcom,geni-spi";
849				reg = <0 0x00880000 0 0x4000>;
850				clock-names = "se";
851				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
852				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
853				pinctrl-names = "default";
854				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
855				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
856						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
857						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
858				interconnect-names = "qup-core", "qup-config", "qup-memory";
859				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
860				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
861				dma-names = "tx", "rx";
862				#address-cells = <1>;
863				#size-cells = <0>;
864				status = "disabled";
865			};
866
867			i2c9: i2c@884000 {
868				compatible = "qcom,geni-i2c";
869				reg = <0 0x00884000 0 0x4000>;
870				clock-names = "se";
871				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
872				pinctrl-names = "default";
873				pinctrl-0 = <&qup_i2c9_data_clk>;
874				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
875				#address-cells = <1>;
876				#size-cells = <0>;
877				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
878						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
879						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
880				interconnect-names = "qup-core", "qup-config", "qup-memory";
881				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
882				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
883				dma-names = "tx", "rx";
884				status = "disabled";
885			};
886
887			spi9: spi@884000 {
888				compatible = "qcom,geni-spi";
889				reg = <0 0x00884000 0 0x4000>;
890				clock-names = "se";
891				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
892				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
893				pinctrl-names = "default";
894				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
895				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
896						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
897						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
898				interconnect-names = "qup-core", "qup-config", "qup-memory";
899				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
900				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
901				dma-names = "tx", "rx";
902				#address-cells = <1>;
903				#size-cells = <0>;
904				status = "disabled";
905			};
906
907			i2c10: i2c@888000 {
908				compatible = "qcom,geni-i2c";
909				reg = <0 0x00888000 0 0x4000>;
910				clock-names = "se";
911				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
912				pinctrl-names = "default";
913				pinctrl-0 = <&qup_i2c10_data_clk>;
914				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
915				#address-cells = <1>;
916				#size-cells = <0>;
917				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
918						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
919						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
920				interconnect-names = "qup-core", "qup-config", "qup-memory";
921				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
922				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
923				dma-names = "tx", "rx";
924				status = "disabled";
925			};
926
927			spi10: spi@888000 {
928				compatible = "qcom,geni-spi";
929				reg = <0 0x00888000 0 0x4000>;
930				clock-names = "se";
931				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
932				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
933				pinctrl-names = "default";
934				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
935				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
936						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
937						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
938				interconnect-names = "qup-core", "qup-config", "qup-memory";
939				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
940				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
941				dma-names = "tx", "rx";
942				#address-cells = <1>;
943				#size-cells = <0>;
944				status = "disabled";
945			};
946
947			i2c11: i2c@88c000 {
948				compatible = "qcom,geni-i2c";
949				reg = <0 0x0088c000 0 0x4000>;
950				clock-names = "se";
951				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
952				pinctrl-names = "default";
953				pinctrl-0 = <&qup_i2c11_data_clk>;
954				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
955				#address-cells = <1>;
956				#size-cells = <0>;
957				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
958						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
959						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
960				interconnect-names = "qup-core", "qup-config", "qup-memory";
961				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
962				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
963				dma-names = "tx", "rx";
964				status = "disabled";
965			};
966
967			spi11: spi@88c000 {
968				compatible = "qcom,geni-spi";
969				reg = <0 0x0088c000 0 0x4000>;
970				clock-names = "se";
971				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
972				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
973				pinctrl-names = "default";
974				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
975				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
976						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
977						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
978				interconnect-names = "qup-core", "qup-config", "qup-memory";
979				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
980				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
981				dma-names = "tx", "rx";
982				#address-cells = <1>;
983				#size-cells = <0>;
984				status = "disabled";
985			};
986
987			i2c12: i2c@890000 {
988				compatible = "qcom,geni-i2c";
989				reg = <0 0x00890000 0 0x4000>;
990				clock-names = "se";
991				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
992				pinctrl-names = "default";
993				pinctrl-0 = <&qup_i2c12_data_clk>;
994				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
995				#address-cells = <1>;
996				#size-cells = <0>;
997				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
998						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
999						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1000				interconnect-names = "qup-core", "qup-config", "qup-memory";
1001				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1002				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1003				dma-names = "tx", "rx";
1004				status = "disabled";
1005			};
1006
1007			spi12: spi@890000 {
1008				compatible = "qcom,geni-spi";
1009				reg = <0 0x00890000 0 0x4000>;
1010				clock-names = "se";
1011				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1012				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1013				pinctrl-names = "default";
1014				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1015				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1016						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1017						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1018				interconnect-names = "qup-core", "qup-config", "qup-memory";
1019				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1020				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1021				dma-names = "tx", "rx";
1022				#address-cells = <1>;
1023				#size-cells = <0>;
1024				status = "disabled";
1025			};
1026
1027			i2c13: i2c@894000 {
1028				compatible = "qcom,geni-i2c";
1029				reg = <0 0x00894000 0 0x4000>;
1030				clock-names = "se";
1031				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1032				pinctrl-names = "default";
1033				pinctrl-0 = <&qup_i2c13_data_clk>;
1034				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1035				#address-cells = <1>;
1036				#size-cells = <0>;
1037				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1038						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1039						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1040				interconnect-names = "qup-core", "qup-config", "qup-memory";
1041				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1042				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1043				dma-names = "tx", "rx";
1044				status = "disabled";
1045			};
1046
1047			spi13: spi@894000 {
1048				compatible = "qcom,geni-spi";
1049				reg = <0 0x00894000 0 0x4000>;
1050				clock-names = "se";
1051				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1052				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1053				pinctrl-names = "default";
1054				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1055				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1056						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1057						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1058				interconnect-names = "qup-core", "qup-config", "qup-memory";
1059				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1060				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1061				dma-names = "tx", "rx";
1062				#address-cells = <1>;
1063				#size-cells = <0>;
1064				status = "disabled";
1065			};
1066
1067			i2c15: i2c@89c000 {
1068				compatible = "qcom,geni-i2c";
1069				reg = <0 0x0089c000 0 0x4000>;
1070				clock-names = "se";
1071				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1072				pinctrl-names = "default";
1073				pinctrl-0 = <&qup_i2c15_data_clk>;
1074				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1075				#address-cells = <1>;
1076				#size-cells = <0>;
1077				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1078						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1079						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1080				interconnect-names = "qup-core", "qup-config", "qup-memory";
1081				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
1082				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
1083				dma-names = "tx", "rx";
1084				status = "disabled";
1085			};
1086
1087			spi15: spi@89c000 {
1088				compatible = "qcom,geni-spi";
1089				reg = <0 0x0089c000 0 0x4000>;
1090				clock-names = "se";
1091				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1092				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1093				pinctrl-names = "default";
1094				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
1095				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1096						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1097						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1098				interconnect-names = "qup-core", "qup-config", "qup-memory";
1099				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
1100				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
1101				dma-names = "tx", "rx";
1102				#address-cells = <1>;
1103				#size-cells = <0>;
1104				status = "disabled";
1105			};
1106		};
1107
1108		i2c_master_hub_0: geniqup@9c0000 {
1109			compatible = "qcom,geni-se-i2c-master-hub";
1110			reg = <0x0 0x009c0000 0x0 0x2000>;
1111			clock-names = "s-ahb";
1112			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
1113			#address-cells = <2>;
1114			#size-cells = <2>;
1115			ranges;
1116			status = "disabled";
1117
1118			i2c_hub_0: i2c@980000 {
1119				compatible = "qcom,geni-i2c-master-hub";
1120				reg = <0x0 0x00980000 0x0 0x4000>;
1121				clock-names = "se", "core";
1122				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
1123					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1124				pinctrl-names = "default";
1125				pinctrl-0 = <&hub_i2c0_data_clk>;
1126				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
1127				#address-cells = <1>;
1128				#size-cells = <0>;
1129				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1130						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1131				interconnect-names = "qup-core", "qup-config";
1132				status = "disabled";
1133			};
1134
1135			i2c_hub_1: i2c@984000 {
1136				compatible = "qcom,geni-i2c-master-hub";
1137				reg = <0x0 0x00984000 0x0 0x4000>;
1138				clock-names = "se", "core";
1139				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
1140					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1141				pinctrl-names = "default";
1142				pinctrl-0 = <&hub_i2c1_data_clk>;
1143				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
1144				#address-cells = <1>;
1145				#size-cells = <0>;
1146				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1147						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1148				interconnect-names = "qup-core", "qup-config";
1149				status = "disabled";
1150			};
1151
1152			i2c_hub_2: i2c@988000 {
1153				compatible = "qcom,geni-i2c-master-hub";
1154				reg = <0x0 0x00988000 0x0 0x4000>;
1155				clock-names = "se", "core";
1156				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
1157					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1158				pinctrl-names = "default";
1159				pinctrl-0 = <&hub_i2c2_data_clk>;
1160				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
1161				#address-cells = <1>;
1162				#size-cells = <0>;
1163				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1164						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1165				interconnect-names = "qup-core", "qup-config";
1166				status = "disabled";
1167			};
1168
1169			i2c_hub_3: i2c@98c000 {
1170				compatible = "qcom,geni-i2c-master-hub";
1171				reg = <0x0 0x0098c000 0x0 0x4000>;
1172				clock-names = "se", "core";
1173				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
1174					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1175				pinctrl-names = "default";
1176				pinctrl-0 = <&hub_i2c3_data_clk>;
1177				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
1178				#address-cells = <1>;
1179				#size-cells = <0>;
1180				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1181						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1182				interconnect-names = "qup-core", "qup-config";
1183				status = "disabled";
1184			};
1185
1186			i2c_hub_4: i2c@990000 {
1187				compatible = "qcom,geni-i2c-master-hub";
1188				reg = <0x0 0x00990000 0x0 0x4000>;
1189				clock-names = "se", "core";
1190				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
1191					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1192				pinctrl-names = "default";
1193				pinctrl-0 = <&hub_i2c4_data_clk>;
1194				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
1195				#address-cells = <1>;
1196				#size-cells = <0>;
1197				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1198						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1199				interconnect-names = "qup-core", "qup-config";
1200				status = "disabled";
1201			};
1202
1203			i2c_hub_5: i2c@994000 {
1204				compatible = "qcom,geni-i2c-master-hub";
1205				reg = <0 0x00994000 0 0x4000>;
1206				clock-names = "se", "core";
1207				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
1208					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1209				pinctrl-names = "default";
1210				pinctrl-0 = <&hub_i2c5_data_clk>;
1211				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
1212				#address-cells = <1>;
1213				#size-cells = <0>;
1214				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1215						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1216				interconnect-names = "qup-core", "qup-config";
1217				status = "disabled";
1218			};
1219
1220			i2c_hub_6: i2c@998000 {
1221				compatible = "qcom,geni-i2c-master-hub";
1222				reg = <0 0x00998000 0 0x4000>;
1223				clock-names = "se", "core";
1224				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
1225					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1226				pinctrl-names = "default";
1227				pinctrl-0 = <&hub_i2c6_data_clk>;
1228				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
1229				#address-cells = <1>;
1230				#size-cells = <0>;
1231				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1232						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1233				interconnect-names = "qup-core", "qup-config";
1234				status = "disabled";
1235			};
1236
1237			i2c_hub_7: i2c@99c000 {
1238				compatible = "qcom,geni-i2c-master-hub";
1239				reg = <0 0x0099c000 0 0x4000>;
1240				clock-names = "se", "core";
1241				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
1242					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1243				pinctrl-names = "default";
1244				pinctrl-0 = <&hub_i2c7_data_clk>;
1245				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
1246				#address-cells = <1>;
1247				#size-cells = <0>;
1248				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1249						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1250				interconnect-names = "qup-core", "qup-config";
1251				status = "disabled";
1252			};
1253
1254			i2c_hub_8: i2c@9a0000 {
1255				compatible = "qcom,geni-i2c-master-hub";
1256				reg = <0 0x009a0000 0 0x4000>;
1257				clock-names = "se", "core";
1258				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
1259					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1260				pinctrl-names = "default";
1261				pinctrl-0 = <&hub_i2c8_data_clk>;
1262				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
1263				#address-cells = <1>;
1264				#size-cells = <0>;
1265				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1266						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1267				interconnect-names = "qup-core", "qup-config";
1268				status = "disabled";
1269			};
1270
1271			i2c_hub_9: i2c@9a4000 {
1272				compatible = "qcom,geni-i2c-master-hub";
1273				reg = <0 0x009a4000 0 0x4000>;
1274				clock-names = "se", "core";
1275				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
1276					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1277				pinctrl-names = "default";
1278				pinctrl-0 = <&hub_i2c9_data_clk>;
1279				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
1280				#address-cells = <1>;
1281				#size-cells = <0>;
1282				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1283						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1284				interconnect-names = "qup-core", "qup-config";
1285				status = "disabled";
1286			};
1287		};
1288
1289		gpi_dma1: dma-controller@a00000 {
1290			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
1291			#dma-cells = <3>;
1292			reg = <0 0x00a00000 0 0x60000>;
1293			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1294				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1295				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1296				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1297				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1298				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1299				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1300				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1301				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1302				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1303				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1304				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1305			dma-channels = <12>;
1306			dma-channel-mask = <0x1e>;
1307			iommus = <&apps_smmu 0xb6 0>;
1308			status = "disabled";
1309		};
1310
1311		qupv3_id_0: geniqup@ac0000 {
1312			compatible = "qcom,geni-se-qup";
1313			reg = <0 0x00ac0000 0 0x2000>;
1314			ranges;
1315			clock-names = "m-ahb", "s-ahb";
1316			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1317				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1318			iommus = <&apps_smmu 0xa3 0>;
1319			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1320			interconnect-names = "qup-core";
1321			#address-cells = <2>;
1322			#size-cells = <2>;
1323			status = "disabled";
1324
1325			i2c0: i2c@a80000 {
1326				compatible = "qcom,geni-i2c";
1327				reg = <0 0x00a80000 0 0x4000>;
1328				clock-names = "se";
1329				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1330				pinctrl-names = "default";
1331				pinctrl-0 = <&qup_i2c0_data_clk>;
1332				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1333				#address-cells = <1>;
1334				#size-cells = <0>;
1335				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1336						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1337						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1338				interconnect-names = "qup-core", "qup-config", "qup-memory";
1339				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1340				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1341				dma-names = "tx", "rx";
1342				status = "disabled";
1343			};
1344
1345			spi0: spi@a80000 {
1346				compatible = "qcom,geni-spi";
1347				reg = <0 0x00a80000 0 0x4000>;
1348				clock-names = "se";
1349				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1350				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1351				pinctrl-names = "default";
1352				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1353				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1354						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1355						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1356				interconnect-names = "qup-core", "qup-config", "qup-memory";
1357				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1358				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1359				dma-names = "tx", "rx";
1360				#address-cells = <1>;
1361				#size-cells = <0>;
1362				status = "disabled";
1363			};
1364
1365			i2c1: i2c@a84000 {
1366				compatible = "qcom,geni-i2c";
1367				reg = <0 0x00a84000 0 0x4000>;
1368				clock-names = "se";
1369				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1370				pinctrl-names = "default";
1371				pinctrl-0 = <&qup_i2c1_data_clk>;
1372				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1373				#address-cells = <1>;
1374				#size-cells = <0>;
1375				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1376						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1377						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1378				interconnect-names = "qup-core", "qup-config", "qup-memory";
1379				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1380				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1381				dma-names = "tx", "rx";
1382				status = "disabled";
1383			};
1384
1385			spi1: spi@a84000 {
1386				compatible = "qcom,geni-spi";
1387				reg = <0 0x00a84000 0 0x4000>;
1388				clock-names = "se";
1389				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1390				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1391				pinctrl-names = "default";
1392				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1393				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1394						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1395						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1396				interconnect-names = "qup-core", "qup-config", "qup-memory";
1397				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1398				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1399				dma-names = "tx", "rx";
1400				#address-cells = <1>;
1401				#size-cells = <0>;
1402				status = "disabled";
1403			};
1404
1405			i2c2: i2c@a88000 {
1406				compatible = "qcom,geni-i2c";
1407				reg = <0 0x00a88000 0 0x4000>;
1408				clock-names = "se";
1409				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1410				pinctrl-names = "default";
1411				pinctrl-0 = <&qup_i2c2_data_clk>;
1412				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1413				#address-cells = <1>;
1414				#size-cells = <0>;
1415				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1416						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1417						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1418				interconnect-names = "qup-core", "qup-config", "qup-memory";
1419				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1420				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1421				dma-names = "tx", "rx";
1422				status = "disabled";
1423			};
1424
1425			spi2: spi@a88000 {
1426				compatible = "qcom,geni-spi";
1427				reg = <0 0x00a88000 0 0x4000>;
1428				clock-names = "se";
1429				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1430				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1431				pinctrl-names = "default";
1432				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1433				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1434						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1435						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1436				interconnect-names = "qup-core", "qup-config", "qup-memory";
1437				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1438				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1439				dma-names = "tx", "rx";
1440				#address-cells = <1>;
1441				#size-cells = <0>;
1442				status = "disabled";
1443			};
1444
1445			i2c3: i2c@a8c000 {
1446				compatible = "qcom,geni-i2c";
1447				reg = <0 0x00a8c000 0 0x4000>;
1448				clock-names = "se";
1449				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1450				pinctrl-names = "default";
1451				pinctrl-0 = <&qup_i2c3_data_clk>;
1452				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1453				#address-cells = <1>;
1454				#size-cells = <0>;
1455				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1456						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1457						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1458				interconnect-names = "qup-core", "qup-config", "qup-memory";
1459				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1460				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1461				dma-names = "tx", "rx";
1462				status = "disabled";
1463			};
1464
1465			spi3: spi@a8c000 {
1466				compatible = "qcom,geni-spi";
1467				reg = <0 0x00a8c000 0 0x4000>;
1468				clock-names = "se";
1469				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1470				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1471				pinctrl-names = "default";
1472				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1473				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1474						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1475						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1476				interconnect-names = "qup-core", "qup-config", "qup-memory";
1477				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1478				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1479				dma-names = "tx", "rx";
1480				#address-cells = <1>;
1481				#size-cells = <0>;
1482				status = "disabled";
1483			};
1484
1485			i2c4: i2c@a90000 {
1486				compatible = "qcom,geni-i2c";
1487				reg = <0 0x00a90000 0 0x4000>;
1488				clock-names = "se";
1489				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1490				pinctrl-names = "default";
1491				pinctrl-0 = <&qup_i2c4_data_clk>;
1492				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1493				#address-cells = <1>;
1494				#size-cells = <0>;
1495				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1496						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1497						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1498				interconnect-names = "qup-core", "qup-config", "qup-memory";
1499				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1500				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1501				dma-names = "tx", "rx";
1502				status = "disabled";
1503			};
1504
1505			spi4: spi@a90000 {
1506				compatible = "qcom,geni-spi";
1507				reg = <0 0x00a90000 0 0x4000>;
1508				clock-names = "se";
1509				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1510				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1511				pinctrl-names = "default";
1512				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1513				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1514						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1515						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1516				interconnect-names = "qup-core", "qup-config", "qup-memory";
1517				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1518				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1519				dma-names = "tx", "rx";
1520				#address-cells = <1>;
1521				#size-cells = <0>;
1522				status = "disabled";
1523			};
1524
1525			i2c5: i2c@a94000 {
1526				compatible = "qcom,geni-i2c";
1527				reg = <0 0x00a94000 0 0x4000>;
1528				clock-names = "se";
1529				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1530				pinctrl-names = "default";
1531				pinctrl-0 = <&qup_i2c5_data_clk>;
1532				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1533				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1534						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1535						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1536				interconnect-names = "qup-core", "qup-config", "qup-memory";
1537				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1538				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1539				dma-names = "tx", "rx";
1540				#address-cells = <1>;
1541				#size-cells = <0>;
1542				status = "disabled";
1543			};
1544
1545			spi5: spi@a94000 {
1546				compatible = "qcom,geni-spi";
1547				reg = <0 0x00a94000 0 0x4000>;
1548				clock-names = "se";
1549				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1550				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1551				pinctrl-names = "default";
1552				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1553				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1554						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1555						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1556				interconnect-names = "qup-core", "qup-config", "qup-memory";
1557				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1558				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1559				dma-names = "tx", "rx";
1560				#address-cells = <1>;
1561				#size-cells = <0>;
1562				status = "disabled";
1563			};
1564
1565			i2c6: i2c@a98000 {
1566				compatible = "qcom,geni-i2c";
1567				reg = <0 0x00a98000 0 0x4000>;
1568				clock-names = "se";
1569				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1570				pinctrl-names = "default";
1571				pinctrl-0 = <&qup_i2c6_data_clk>;
1572				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1573				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1574						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1575						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1576				interconnect-names = "qup-core", "qup-config", "qup-memory";
1577				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1578				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1579				dma-names = "tx", "rx";
1580				#address-cells = <1>;
1581				#size-cells = <0>;
1582				status = "disabled";
1583			};
1584
1585			spi6: spi@a98000 {
1586				compatible = "qcom,geni-spi";
1587				reg = <0 0x00a98000 0 0x4000>;
1588				clock-names = "se";
1589				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1590				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1591				pinctrl-names = "default";
1592				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1593				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1594						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1595						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1596				interconnect-names = "qup-core", "qup-config", "qup-memory";
1597				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1598				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1599				dma-names = "tx", "rx";
1600				#address-cells = <1>;
1601				#size-cells = <0>;
1602				status = "disabled";
1603			};
1604
1605			uart7: serial@a9c000 {
1606				compatible = "qcom,geni-debug-uart";
1607				reg = <0 0x00a9c000 0 0x4000>;
1608				clock-names = "se";
1609				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1610				pinctrl-names = "default";
1611				pinctrl-0 = <&qup_uart7_default>;
1612				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1613				interconnect-names = "qup-core", "qup-config";
1614				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1615						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1616				status = "disabled";
1617			};
1618		};
1619
1620		cnoc_main: interconnect@1500000 {
1621			compatible = "qcom,sm8550-cnoc-main";
1622			reg = <0 0x01500000 0 0x13080>;
1623			#interconnect-cells = <2>;
1624			qcom,bcm-voters = <&apps_bcm_voter>;
1625		};
1626
1627		config_noc: interconnect@1600000 {
1628			compatible = "qcom,sm8550-config-noc";
1629			reg = <0 0x01600000 0 0x6200>;
1630			#interconnect-cells = <2>;
1631			qcom,bcm-voters = <&apps_bcm_voter>;
1632		};
1633
1634		system_noc: interconnect@1680000 {
1635			compatible = "qcom,sm8550-system-noc";
1636			reg = <0 0x01680000 0 0x1d080>;
1637			#interconnect-cells = <2>;
1638			qcom,bcm-voters = <&apps_bcm_voter>;
1639		};
1640
1641		pcie_noc: interconnect@16c0000 {
1642			compatible = "qcom,sm8550-pcie-anoc";
1643			reg = <0 0x016c0000 0 0x12200>;
1644			#interconnect-cells = <2>;
1645			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1646				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
1647			qcom,bcm-voters = <&apps_bcm_voter>;
1648		};
1649
1650		aggre1_noc: interconnect@16e0000 {
1651			compatible = "qcom,sm8550-aggre1-noc";
1652			reg = <0 0x016e0000 0 0x14400>;
1653			#interconnect-cells = <2>;
1654			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1655				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
1656			qcom,bcm-voters = <&apps_bcm_voter>;
1657		};
1658
1659		aggre2_noc: interconnect@1700000 {
1660			compatible = "qcom,sm8550-aggre2-noc";
1661			reg = <0 0x01700000 0 0x1e400>;
1662			#interconnect-cells = <2>;
1663			clocks = <&rpmhcc RPMH_IPA_CLK>;
1664			qcom,bcm-voters = <&apps_bcm_voter>;
1665		};
1666
1667		mmss_noc: interconnect@1780000 {
1668			compatible = "qcom,sm8550-mmss-noc";
1669			reg = <0 0x01780000 0 0x5b800>;
1670			#interconnect-cells = <2>;
1671			qcom,bcm-voters = <&apps_bcm_voter>;
1672		};
1673
1674		pcie0: pci@1c00000 {
1675			device_type = "pci";
1676			compatible = "qcom,pcie-sm8550";
1677			reg = <0 0x01c00000 0 0x3000>,
1678			      <0 0x60000000 0 0xf1d>,
1679			      <0 0x60000f20 0 0xa8>,
1680			      <0 0x60001000 0 0x1000>,
1681			      <0 0x60100000 0 0x100000>;
1682			reg-names = "parf", "dbi", "elbi", "atu", "config";
1683			#address-cells = <3>;
1684			#size-cells = <2>;
1685			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
1686				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1687			bus-range = <0x00 0xff>;
1688
1689			dma-coherent;
1690
1691			linux,pci-domain = <0>;
1692			num-lanes = <2>;
1693
1694			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1695			interrupt-names = "msi";
1696
1697			#interrupt-cells = <1>;
1698			interrupt-map-mask = <0 0 0 0x7>;
1699			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1700					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1701					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1702					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1703
1704			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1705				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1706				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1707				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1708				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1709				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1710				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
1711			clock-names = "aux",
1712				      "cfg",
1713				      "bus_master",
1714				      "bus_slave",
1715				      "slave_q2a",
1716				      "ddrss_sf_tbu",
1717				      "noc_aggr";
1718
1719			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
1720					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
1721			interconnect-names = "pcie-mem", "cpu-pcie";
1722
1723			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
1724				    <0x100 &apps_smmu 0x1401 0x1>;
1725
1726			resets = <&gcc GCC_PCIE_0_BCR>;
1727			reset-names = "pci";
1728
1729			power-domains = <&gcc PCIE_0_GDSC>;
1730
1731			phys = <&pcie0_phy>;
1732			phy-names = "pciephy";
1733
1734			status = "disabled";
1735		};
1736
1737		pcie0_phy: phy@1c06000 {
1738			compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
1739			reg = <0 0x01c06000 0 0x2000>;
1740
1741			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1742				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1743				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
1744				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
1745				 <&gcc GCC_PCIE_0_PIPE_CLK>;
1746			clock-names = "aux", "cfg_ahb", "ref", "rchng",
1747				      "pipe";
1748
1749			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1750			reset-names = "phy";
1751
1752			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1753			assigned-clock-rates = <100000000>;
1754
1755			power-domains = <&gcc PCIE_0_PHY_GDSC>;
1756
1757			#clock-cells = <0>;
1758			clock-output-names = "pcie0_pipe_clk";
1759
1760			#phy-cells = <0>;
1761
1762			status = "disabled";
1763		};
1764
1765		pcie1: pci@1c08000 {
1766			device_type = "pci";
1767			compatible = "qcom,pcie-sm8550";
1768			reg = <0x0 0x01c08000 0x0 0x3000>,
1769			      <0x0 0x40000000 0x0 0xf1d>,
1770			      <0x0 0x40000f20 0x0 0xa8>,
1771			      <0x0 0x40001000 0x0 0x1000>,
1772			      <0x0 0x40100000 0x0 0x100000>;
1773			reg-names = "parf", "dbi", "elbi", "atu", "config";
1774			#address-cells = <3>;
1775			#size-cells = <2>;
1776			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
1777				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1778			bus-range = <0x00 0xff>;
1779
1780			dma-coherent;
1781
1782			linux,pci-domain = <1>;
1783			num-lanes = <2>;
1784
1785			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1786			interrupt-names = "msi";
1787
1788			#interrupt-cells = <1>;
1789			interrupt-map-mask = <0 0 0 0x7>;
1790			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1791					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1792					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1793					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1794
1795			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
1796				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1797				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1798				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1799				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1800				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1801				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1802				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
1803			clock-names = "aux",
1804				      "cfg",
1805				      "bus_master",
1806				      "bus_slave",
1807				      "slave_q2a",
1808				      "ddrss_sf_tbu",
1809				      "noc_aggr",
1810				      "cnoc_sf_axi";
1811
1812			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1813			assigned-clock-rates = <19200000>;
1814
1815			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
1816					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
1817			interconnect-names = "pcie-mem", "cpu-pcie";
1818
1819			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
1820				    <0x100 &apps_smmu 0x1481 0x1>;
1821
1822			resets = <&gcc GCC_PCIE_1_BCR>,
1823				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
1824			reset-names = "pci", "link_down";
1825
1826			power-domains = <&gcc PCIE_1_GDSC>;
1827
1828			phys = <&pcie1_phy>;
1829			phy-names = "pciephy";
1830
1831			status = "disabled";
1832		};
1833
1834		pcie1_phy: phy@1c0e000 {
1835			compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
1836			reg = <0x0 0x01c0e000 0x0 0x2000>;
1837
1838			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
1839				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1840				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
1841				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
1842				 <&gcc GCC_PCIE_1_PIPE_CLK>;
1843			clock-names = "aux", "cfg_ahb", "ref", "rchng",
1844				      "pipe";
1845
1846			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
1847				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
1848			reset-names = "phy", "phy_nocsr";
1849
1850			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1851			assigned-clock-rates = <100000000>;
1852
1853			power-domains = <&gcc PCIE_1_PHY_GDSC>;
1854
1855			#clock-cells = <0>;
1856			clock-output-names = "pcie1_pipe_clk";
1857
1858			#phy-cells = <0>;
1859
1860			status = "disabled";
1861		};
1862
1863		cryptobam: dma-controller@1dc4000 {
1864			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
1865			reg = <0x0 0x01dc4000 0x0 0x28000>;
1866			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
1867			#dma-cells = <1>;
1868			qcom,ee = <0>;
1869			qcom,controlled-remotely;
1870			iommus = <&apps_smmu 0x480 0x0>,
1871				 <&apps_smmu 0x481 0x0>;
1872		};
1873
1874		crypto: crypto@1dfa000 {
1875			compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
1876			reg = <0x0 0x01dfa000 0x0 0x6000>;
1877			dmas = <&cryptobam 4>, <&cryptobam 5>;
1878			dma-names = "rx", "tx";
1879			iommus = <&apps_smmu 0x480 0x0>,
1880				 <&apps_smmu 0x481 0x0>;
1881			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
1882			interconnect-names = "memory";
1883		};
1884
1885		ufs_mem_phy: phy@1d80000 {
1886			compatible = "qcom,sm8550-qmp-ufs-phy";
1887			reg = <0x0 0x01d80000 0x0 0x2000>;
1888			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
1889				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
1890			clock-names = "ref", "ref_aux";
1891
1892			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
1893
1894			resets = <&ufs_mem_hc 0>;
1895			reset-names = "ufsphy";
1896
1897			#clock-cells = <1>;
1898			#phy-cells = <0>;
1899
1900			status = "disabled";
1901		};
1902
1903		ufs_mem_hc: ufs@1d84000 {
1904			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
1905				     "jedec,ufs-2.0";
1906			reg = <0x0 0x01d84000 0x0 0x3000>;
1907			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1908			phys = <&ufs_mem_phy>;
1909			phy-names = "ufsphy";
1910			lanes-per-direction = <2>;
1911			#reset-cells = <1>;
1912			resets = <&gcc GCC_UFS_PHY_BCR>;
1913			reset-names = "rst";
1914
1915			power-domains = <&gcc UFS_PHY_GDSC>;
1916			required-opps = <&rpmhpd_opp_nom>;
1917
1918			iommus = <&apps_smmu 0x60 0x0>;
1919			dma-coherent;
1920
1921			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
1922					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
1923
1924			interconnect-names = "ufs-ddr", "cpu-ufs";
1925			clock-names = "core_clk",
1926				      "bus_aggr_clk",
1927				      "iface_clk",
1928				      "core_clk_unipro",
1929				      "ref_clk",
1930				      "tx_lane0_sync_clk",
1931				      "rx_lane0_sync_clk",
1932				      "rx_lane1_sync_clk";
1933			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
1934				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1935				 <&gcc GCC_UFS_PHY_AHB_CLK>,
1936				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
1937				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
1938				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
1939				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
1940				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
1941			freq-table-hz =
1942				<75000000 300000000>,
1943				<0 0>,
1944				<0 0>,
1945				<75000000 300000000>,
1946				<100000000 403000000>,
1947				<0 0>,
1948				<0 0>,
1949				<0 0>;
1950			qcom,ice = <&ice>;
1951
1952			status = "disabled";
1953		};
1954
1955		ice: crypto@1d88000 {
1956			compatible = "qcom,sm8550-inline-crypto-engine",
1957				     "qcom,inline-crypto-engine";
1958			reg = <0 0x01d88000 0 0x8000>;
1959			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
1960		};
1961
1962		tcsr_mutex: hwlock@1f40000 {
1963			compatible = "qcom,tcsr-mutex";
1964			reg = <0 0x01f40000 0 0x20000>;
1965			#hwlock-cells = <1>;
1966		};
1967
1968		tcsr: clock-controller@1fc0000 {
1969			compatible = "qcom,sm8550-tcsr", "syscon";
1970			reg = <0 0x01fc0000 0 0x30000>;
1971			clocks = <&rpmhcc RPMH_CXO_CLK>;
1972			#clock-cells = <1>;
1973			#reset-cells = <1>;
1974		};
1975
1976		gpucc: clock-controller@3d90000 {
1977			compatible = "qcom,sm8550-gpucc";
1978			reg = <0 0x03d90000 0 0xa000>;
1979			clocks = <&bi_tcxo_div2>,
1980				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
1981				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
1982			#clock-cells = <1>;
1983			#reset-cells = <1>;
1984			#power-domain-cells = <1>;
1985		};
1986
1987		remoteproc_mpss: remoteproc@4080000 {
1988			compatible = "qcom,sm8550-mpss-pas";
1989			reg = <0x0 0x04080000 0x0 0x4040>;
1990
1991			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
1992					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
1993					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
1994					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
1995					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
1996					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
1997			interrupt-names = "wdog", "fatal", "ready", "handover",
1998					  "stop-ack", "shutdown-ack";
1999
2000			clocks = <&rpmhcc RPMH_CXO_CLK>;
2001			clock-names = "xo";
2002
2003			power-domains = <&rpmhpd RPMHPD_CX>,
2004					<&rpmhpd RPMHPD_MSS>;
2005			power-domain-names = "cx", "mss";
2006
2007			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
2008
2009			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
2010
2011			qcom,qmp = <&aoss_qmp>;
2012
2013			qcom,smem-states = <&smp2p_modem_out 0>;
2014			qcom,smem-state-names = "stop";
2015
2016			status = "disabled";
2017
2018			glink-edge {
2019				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2020							     IPCC_MPROC_SIGNAL_GLINK_QMP
2021							     IRQ_TYPE_EDGE_RISING>;
2022				mboxes = <&ipcc IPCC_CLIENT_MPSS
2023						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2024				label = "mpss";
2025				qcom,remote-pid = <1>;
2026			};
2027		};
2028
2029		lpass_wsa2macro: codec@6aa0000 {
2030			compatible = "qcom,sm8550-lpass-wsa-macro";
2031			reg = <0 0x06aa0000 0 0x1000>;
2032			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2033				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2034				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2035				 <&lpass_vamacro>;
2036			clock-names = "mclk", "macro", "dcodec", "fsgen";
2037			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2038			assigned-clock-rates = <19200000>;
2039
2040			#clock-cells = <0>;
2041			clock-output-names = "wsa2-mclk";
2042			pinctrl-names = "default";
2043			pinctrl-0 = <&wsa2_swr_active>;
2044			#sound-dai-cells = <1>;
2045		};
2046
2047		swr3: soundwire@6ab0000 {
2048			compatible = "qcom,soundwire-v2.0.0";
2049			reg = <0 0x06ab0000 0 0x10000>;
2050			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
2051			clocks = <&lpass_wsa2macro>;
2052			clock-names = "iface";
2053			label = "WSA2";
2054
2055			qcom,din-ports = <4>;
2056			qcom,dout-ports = <9>;
2057
2058			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2059			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2060			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2061			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2062			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2063			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2064			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2065			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2066			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2067
2068			#address-cells = <2>;
2069			#size-cells = <0>;
2070			#sound-dai-cells = <1>;
2071			status = "disabled";
2072		};
2073
2074		lpass_rxmacro: codec@6ac0000 {
2075			compatible = "qcom,sm8550-lpass-rx-macro";
2076			reg = <0 0x06ac0000 0 0x1000>;
2077			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2078				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2079				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2080				 <&lpass_vamacro>;
2081			clock-names = "mclk", "macro", "dcodec", "fsgen";
2082
2083			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2084			assigned-clock-rates = <19200000>;
2085
2086			#clock-cells = <0>;
2087			clock-output-names = "mclk";
2088			pinctrl-names = "default";
2089			pinctrl-0 = <&rx_swr_active>;
2090			#sound-dai-cells = <1>;
2091		};
2092
2093		swr1: soundwire@6ad0000 {
2094			compatible = "qcom,soundwire-v2.0.0";
2095			reg = <0 0x06ad0000 0 0x10000>;
2096			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
2097			clocks = <&lpass_rxmacro>;
2098			clock-names = "iface";
2099			label = "RX";
2100
2101			qcom,din-ports = <0>;
2102			qcom,dout-ports = <10>;
2103
2104			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
2105			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
2106			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
2107			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
2108			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
2109			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
2110			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
2111			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
2112			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
2113
2114			#address-cells = <2>;
2115			#size-cells = <0>;
2116			#sound-dai-cells = <1>;
2117			status = "disabled";
2118		};
2119
2120		lpass_txmacro: codec@6ae0000 {
2121			compatible = "qcom,sm8550-lpass-tx-macro";
2122			reg = <0 0x06ae0000 0 0x1000>;
2123			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2124				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2125				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2126				 <&lpass_vamacro>;
2127			clock-names = "mclk", "macro", "dcodec", "fsgen";
2128			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2129
2130			assigned-clock-rates = <19200000>;
2131
2132			#clock-cells = <0>;
2133			clock-output-names = "mclk";
2134			pinctrl-names = "default";
2135			pinctrl-0 = <&tx_swr_active>;
2136			#sound-dai-cells = <1>;
2137		};
2138
2139		lpass_wsamacro: codec@6b00000 {
2140			compatible = "qcom,sm8550-lpass-wsa-macro";
2141			reg = <0 0x06b00000 0 0x1000>;
2142			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2143				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2144				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2145				 <&lpass_vamacro>;
2146			clock-names = "mclk", "macro", "dcodec", "fsgen";
2147
2148			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2149			assigned-clock-rates = <19200000>;
2150
2151			#clock-cells = <0>;
2152			clock-output-names = "mclk";
2153			pinctrl-names = "default";
2154			pinctrl-0 = <&wsa_swr_active>;
2155			#sound-dai-cells = <1>;
2156		};
2157
2158		swr0: soundwire@6b10000 {
2159			compatible = "qcom,soundwire-v2.0.0";
2160			reg = <0 0x06b10000 0 0x10000>;
2161			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
2162			clocks = <&lpass_wsamacro>;
2163			clock-names = "iface";
2164			label = "WSA";
2165
2166			qcom,din-ports = <4>;
2167			qcom,dout-ports = <9>;
2168
2169			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2170			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2171			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2172			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2173			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2174			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2175			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2176			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2177			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2178
2179			#address-cells = <2>;
2180			#size-cells = <0>;
2181			#sound-dai-cells = <1>;
2182			status = "disabled";
2183		};
2184
2185		swr2: soundwire@6d30000 {
2186			compatible = "qcom,soundwire-v2.0.0";
2187			reg = <0 0x06d30000 0 0x10000>;
2188			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
2189				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
2190			interrupt-names = "core", "wakeup";
2191			clocks = <&lpass_txmacro>;
2192			clock-names = "iface";
2193			label = "TX";
2194
2195			qcom,din-ports = <4>;
2196			qcom,dout-ports = <0>;
2197			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
2198			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
2199			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
2200			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2201			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2202			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2203			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2204			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2205			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
2206
2207			#address-cells = <2>;
2208			#size-cells = <0>;
2209			#sound-dai-cells = <1>;
2210			status = "disabled";
2211		};
2212
2213		lpass_vamacro: codec@6d44000 {
2214			compatible = "qcom,sm8550-lpass-va-macro";
2215			reg = <0 0x06d44000 0 0x1000>;
2216			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2217				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2218				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2219			clock-names = "mclk", "macro", "dcodec";
2220
2221			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2222			assigned-clock-rates = <19200000>;
2223
2224			#clock-cells = <0>;
2225			clock-output-names = "fsgen";
2226			#sound-dai-cells = <1>;
2227		};
2228
2229		lpass_tlmm: pinctrl@6e80000 {
2230			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
2231			reg = <0 0x06e80000 0 0x20000>,
2232			      <0 0x07250000 0 0x10000>;
2233			gpio-controller;
2234			#gpio-cells = <2>;
2235			gpio-ranges = <&lpass_tlmm 0 0 23>;
2236
2237			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2238				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2239			clock-names = "core", "audio";
2240
2241			tx_swr_active: tx-swr-active-state {
2242				clk-pins {
2243					pins = "gpio0";
2244					function = "swr_tx_clk";
2245					drive-strength = <2>;
2246					slew-rate = <1>;
2247					bias-disable;
2248				};
2249
2250				data-pins {
2251					pins = "gpio1", "gpio2", "gpio14";
2252					function = "swr_tx_data";
2253					drive-strength = <2>;
2254					slew-rate = <1>;
2255					bias-bus-hold;
2256				};
2257			};
2258
2259			rx_swr_active: rx-swr-active-state {
2260				clk-pins {
2261					pins = "gpio3";
2262					function = "swr_rx_clk";
2263					drive-strength = <2>;
2264					slew-rate = <1>;
2265					bias-disable;
2266				};
2267
2268				data-pins {
2269					pins = "gpio4", "gpio5";
2270					function = "swr_rx_data";
2271					drive-strength = <2>;
2272					slew-rate = <1>;
2273					bias-bus-hold;
2274				};
2275			};
2276
2277			dmic01_default: dmic01-default-state {
2278				clk-pins {
2279					pins = "gpio6";
2280					function = "dmic1_clk";
2281					drive-strength = <8>;
2282					output-high;
2283				};
2284
2285				data-pins {
2286					pins = "gpio7";
2287					function = "dmic1_data";
2288					drive-strength = <8>;
2289					input-enable;
2290				};
2291			};
2292
2293			dmic02_default: dmic02-default-state {
2294				clk-pins {
2295					pins = "gpio8";
2296					function = "dmic2_clk";
2297					drive-strength = <8>;
2298					output-high;
2299				};
2300
2301				data-pins {
2302					pins = "gpio9";
2303					function = "dmic2_data";
2304					drive-strength = <8>;
2305					input-enable;
2306				};
2307			};
2308
2309			wsa_swr_active: wsa-swr-active-state {
2310				clk-pins {
2311					pins = "gpio10";
2312					function = "wsa_swr_clk";
2313					drive-strength = <2>;
2314					slew-rate = <1>;
2315					bias-disable;
2316				};
2317
2318				data-pins {
2319					pins = "gpio11";
2320					function = "wsa_swr_data";
2321					drive-strength = <2>;
2322					slew-rate = <1>;
2323					bias-bus-hold;
2324				};
2325			};
2326
2327			wsa2_swr_active: wsa2-swr-active-state {
2328				clk-pins {
2329					pins = "gpio15";
2330					function = "wsa2_swr_clk";
2331					drive-strength = <2>;
2332					slew-rate = <1>;
2333					bias-disable;
2334				};
2335
2336				data-pins {
2337					pins = "gpio16";
2338					function = "wsa2_swr_data";
2339					drive-strength = <2>;
2340					slew-rate = <1>;
2341					bias-bus-hold;
2342				};
2343			};
2344		};
2345
2346		lpass_lpiaon_noc: interconnect@7400000 {
2347			compatible = "qcom,sm8550-lpass-lpiaon-noc";
2348			reg = <0 0x07400000 0 0x19080>;
2349			#interconnect-cells = <2>;
2350			qcom,bcm-voters = <&apps_bcm_voter>;
2351		};
2352
2353		lpass_lpicx_noc: interconnect@7430000 {
2354			compatible = "qcom,sm8550-lpass-lpicx-noc";
2355			reg = <0 0x07430000 0 0x3a200>;
2356			#interconnect-cells = <2>;
2357			qcom,bcm-voters = <&apps_bcm_voter>;
2358		};
2359
2360		lpass_ag_noc: interconnect@7e40000 {
2361			compatible = "qcom,sm8550-lpass-ag-noc";
2362			reg = <0 0x07e40000 0 0xe080>;
2363			#interconnect-cells = <2>;
2364			qcom,bcm-voters = <&apps_bcm_voter>;
2365		};
2366
2367		sdhc_2: mmc@8804000 {
2368			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
2369			reg = <0 0x08804000 0 0x1000>;
2370
2371			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
2372				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
2373			interrupt-names = "hc_irq", "pwr_irq";
2374
2375			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2376				 <&gcc GCC_SDCC2_APPS_CLK>,
2377				 <&rpmhcc RPMH_CXO_CLK>;
2378			clock-names = "iface", "core", "xo";
2379			iommus = <&apps_smmu 0x540 0>;
2380			qcom,dll-config = <0x0007642c>;
2381			qcom,ddr-config = <0x80040868>;
2382			power-domains = <&rpmhpd RPMHPD_CX>;
2383			operating-points-v2 = <&sdhc2_opp_table>;
2384
2385			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
2386					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
2387			interconnect-names = "sdhc-ddr", "cpu-sdhc";
2388			bus-width = <4>;
2389			dma-coherent;
2390
2391			/* Forbid SDR104/SDR50 - broken hw! */
2392			sdhci-caps-mask = <0x3 0>;
2393
2394			status = "disabled";
2395
2396			sdhc2_opp_table: opp-table {
2397				compatible = "operating-points-v2";
2398
2399				opp-19200000 {
2400					opp-hz = /bits/ 64 <19200000>;
2401					required-opps = <&rpmhpd_opp_min_svs>;
2402				};
2403
2404				opp-50000000 {
2405					opp-hz = /bits/ 64 <50000000>;
2406					required-opps = <&rpmhpd_opp_low_svs>;
2407				};
2408
2409				opp-100000000 {
2410					opp-hz = /bits/ 64 <100000000>;
2411					required-opps = <&rpmhpd_opp_svs>;
2412				};
2413
2414				opp-202000000 {
2415					opp-hz = /bits/ 64 <202000000>;
2416					required-opps = <&rpmhpd_opp_svs_l1>;
2417				};
2418			};
2419		};
2420
2421		videocc: clock-controller@aaf0000 {
2422			compatible = "qcom,sm8550-videocc";
2423			reg = <0 0x0aaf0000 0 0x10000>;
2424			clocks = <&bi_tcxo_div2>,
2425				 <&gcc GCC_VIDEO_AHB_CLK>;
2426			power-domains = <&rpmhpd RPMHPD_MMCX>;
2427			required-opps = <&rpmhpd_opp_low_svs>;
2428			#clock-cells = <1>;
2429			#reset-cells = <1>;
2430			#power-domain-cells = <1>;
2431		};
2432
2433		mdss: display-subsystem@ae00000 {
2434			compatible = "qcom,sm8550-mdss";
2435			reg = <0 0x0ae00000 0 0x1000>;
2436			reg-names = "mdss";
2437
2438			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2439			interrupt-controller;
2440			#interrupt-cells = <1>;
2441
2442			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2443				 <&gcc GCC_DISP_AHB_CLK>,
2444				 <&gcc GCC_DISP_HF_AXI_CLK>,
2445				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
2446
2447			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
2448
2449			power-domains = <&dispcc MDSS_GDSC>;
2450
2451			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
2452					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
2453			interconnect-names = "mdp0-mem", "mdp1-mem";
2454
2455			iommus = <&apps_smmu 0x1c00 0x2>;
2456
2457			#address-cells = <2>;
2458			#size-cells = <2>;
2459			ranges;
2460
2461			status = "disabled";
2462
2463			mdss_mdp: display-controller@ae01000 {
2464				compatible = "qcom,sm8550-dpu";
2465				reg = <0 0x0ae01000 0 0x8f000>,
2466				      <0 0x0aeb0000 0 0x2008>;
2467				reg-names = "mdp", "vbif";
2468
2469				interrupt-parent = <&mdss>;
2470				interrupts = <0>;
2471
2472				clocks = <&gcc GCC_DISP_AHB_CLK>,
2473					 <&gcc GCC_DISP_HF_AXI_CLK>,
2474					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2475					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
2476					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
2477					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2478				clock-names = "bus",
2479					      "nrt_bus",
2480					      "iface",
2481					      "lut",
2482					      "core",
2483					      "vsync";
2484
2485				power-domains = <&rpmhpd RPMHPD_MMCX>;
2486
2487				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2488				assigned-clock-rates = <19200000>;
2489
2490				operating-points-v2 = <&mdp_opp_table>;
2491
2492				ports {
2493					#address-cells = <1>;
2494					#size-cells = <0>;
2495
2496					port@0 {
2497						reg = <0>;
2498						dpu_intf1_out: endpoint {
2499							remote-endpoint = <&mdss_dsi0_in>;
2500						};
2501					};
2502
2503					port@1 {
2504						reg = <1>;
2505						dpu_intf2_out: endpoint {
2506							remote-endpoint = <&mdss_dsi1_in>;
2507						};
2508					};
2509
2510					port@2 {
2511						reg = <2>;
2512						dpu_intf0_out: endpoint {
2513							remote-endpoint = <&mdss_dp0_in>;
2514						};
2515					};
2516				};
2517
2518				mdp_opp_table: opp-table {
2519					compatible = "operating-points-v2";
2520
2521					opp-200000000 {
2522						opp-hz = /bits/ 64 <200000000>;
2523						required-opps = <&rpmhpd_opp_low_svs>;
2524					};
2525
2526					opp-325000000 {
2527						opp-hz = /bits/ 64 <325000000>;
2528						required-opps = <&rpmhpd_opp_svs>;
2529					};
2530
2531					opp-375000000 {
2532						opp-hz = /bits/ 64 <375000000>;
2533						required-opps = <&rpmhpd_opp_svs_l1>;
2534					};
2535
2536					opp-514000000 {
2537						opp-hz = /bits/ 64 <514000000>;
2538						required-opps = <&rpmhpd_opp_nom>;
2539					};
2540				};
2541			};
2542
2543			mdss_dp0: displayport-controller@ae90000 {
2544				compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
2545				reg = <0 0xae90000 0 0x200>,
2546				      <0 0xae90200 0 0x200>,
2547				      <0 0xae90400 0 0xc00>,
2548				      <0 0xae91000 0 0x400>,
2549				      <0 0xae91400 0 0x400>;
2550				interrupt-parent = <&mdss>;
2551				interrupts = <12>;
2552				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2553					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
2554					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
2555					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
2556					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
2557				clock-names = "core_iface",
2558					      "core_aux",
2559					      "ctrl_link",
2560					      "ctrl_link_iface",
2561					      "stream_pixel";
2562
2563				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
2564						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
2565				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2566							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
2567
2568				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
2569				phy-names = "dp";
2570
2571				#sound-dai-cells = <0>;
2572
2573				operating-points-v2 = <&dp_opp_table>;
2574				power-domains = <&rpmhpd RPMHPD_MMCX>;
2575
2576				status = "disabled";
2577
2578				ports {
2579					#address-cells = <1>;
2580					#size-cells = <0>;
2581
2582					port@0 {
2583						reg = <0>;
2584						mdss_dp0_in: endpoint {
2585							remote-endpoint = <&dpu_intf0_out>;
2586						};
2587					};
2588
2589					port@1 {
2590						reg = <1>;
2591						mdss_dp0_out: endpoint {
2592						};
2593					};
2594				};
2595
2596				dp_opp_table: opp-table {
2597					compatible = "operating-points-v2";
2598
2599					opp-162000000 {
2600						opp-hz = /bits/ 64 <162000000>;
2601						required-opps = <&rpmhpd_opp_low_svs_d1>;
2602					};
2603
2604					opp-270000000 {
2605						opp-hz = /bits/ 64 <270000000>;
2606						required-opps = <&rpmhpd_opp_low_svs>;
2607					};
2608
2609					opp-540000000 {
2610						opp-hz = /bits/ 64 <540000000>;
2611						required-opps = <&rpmhpd_opp_svs_l1>;
2612					};
2613
2614					opp-810000000 {
2615						opp-hz = /bits/ 64 <810000000>;
2616						required-opps = <&rpmhpd_opp_nom>;
2617					};
2618				};
2619			};
2620
2621			mdss_dsi0: dsi@ae94000 {
2622				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2623				reg = <0 0x0ae94000 0 0x400>;
2624				reg-names = "dsi_ctrl";
2625
2626				interrupt-parent = <&mdss>;
2627				interrupts = <4>;
2628
2629				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
2630					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
2631					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
2632					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
2633					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2634					 <&gcc GCC_DISP_HF_AXI_CLK>;
2635				clock-names = "byte",
2636					      "byte_intf",
2637					      "pixel",
2638					      "core",
2639					      "iface",
2640					      "bus";
2641
2642				power-domains = <&rpmhpd RPMHPD_MMCX>;
2643
2644				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
2645						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
2646				assigned-clock-parents = <&mdss_dsi0_phy 0>,
2647							 <&mdss_dsi0_phy 1>;
2648
2649				operating-points-v2 = <&mdss_dsi_opp_table>;
2650
2651				phys = <&mdss_dsi0_phy>;
2652				phy-names = "dsi";
2653
2654				#address-cells = <1>;
2655				#size-cells = <0>;
2656
2657				status = "disabled";
2658
2659				ports {
2660					#address-cells = <1>;
2661					#size-cells = <0>;
2662
2663					port@0 {
2664						reg = <0>;
2665						mdss_dsi0_in: endpoint {
2666							remote-endpoint = <&dpu_intf1_out>;
2667						};
2668					};
2669
2670					port@1 {
2671						reg = <1>;
2672						mdss_dsi0_out: endpoint {
2673						};
2674					};
2675				};
2676
2677				mdss_dsi_opp_table: opp-table {
2678					compatible = "operating-points-v2";
2679
2680					opp-187500000 {
2681						opp-hz = /bits/ 64 <187500000>;
2682						required-opps = <&rpmhpd_opp_low_svs>;
2683					};
2684
2685					opp-300000000 {
2686						opp-hz = /bits/ 64 <300000000>;
2687						required-opps = <&rpmhpd_opp_svs>;
2688					};
2689
2690					opp-358000000 {
2691						opp-hz = /bits/ 64 <358000000>;
2692						required-opps = <&rpmhpd_opp_svs_l1>;
2693					};
2694				};
2695			};
2696
2697			mdss_dsi0_phy: phy@ae95000 {
2698				compatible = "qcom,sm8550-dsi-phy-4nm";
2699				reg = <0 0x0ae95000 0 0x200>,
2700				      <0 0x0ae95200 0 0x280>,
2701				      <0 0x0ae95500 0 0x400>;
2702				reg-names = "dsi_phy",
2703					    "dsi_phy_lane",
2704					    "dsi_pll";
2705
2706				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2707					 <&rpmhcc RPMH_CXO_CLK>;
2708				clock-names = "iface", "ref";
2709
2710				#clock-cells = <1>;
2711				#phy-cells = <0>;
2712
2713				status = "disabled";
2714			};
2715
2716			mdss_dsi1: dsi@ae96000 {
2717				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2718				reg = <0 0x0ae96000 0 0x400>;
2719				reg-names = "dsi_ctrl";
2720
2721				interrupt-parent = <&mdss>;
2722				interrupts = <5>;
2723
2724				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
2725					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
2726					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
2727					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
2728					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2729					 <&gcc GCC_DISP_HF_AXI_CLK>;
2730				clock-names = "byte",
2731					      "byte_intf",
2732					      "pixel",
2733					      "core",
2734					      "iface",
2735					      "bus";
2736
2737				power-domains = <&rpmhpd RPMHPD_MMCX>;
2738
2739				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
2740						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
2741				assigned-clock-parents = <&mdss_dsi1_phy 0>,
2742							 <&mdss_dsi1_phy 1>;
2743
2744				operating-points-v2 = <&mdss_dsi_opp_table>;
2745
2746				phys = <&mdss_dsi1_phy>;
2747				phy-names = "dsi";
2748
2749				#address-cells = <1>;
2750				#size-cells = <0>;
2751
2752				status = "disabled";
2753
2754				ports {
2755					#address-cells = <1>;
2756					#size-cells = <0>;
2757
2758					port@0 {
2759						reg = <0>;
2760						mdss_dsi1_in: endpoint {
2761							remote-endpoint = <&dpu_intf2_out>;
2762						};
2763					};
2764
2765					port@1 {
2766						reg = <1>;
2767						mdss_dsi1_out: endpoint {
2768						};
2769					};
2770				};
2771			};
2772
2773			mdss_dsi1_phy: phy@ae97000 {
2774				compatible = "qcom,sm8550-dsi-phy-4nm";
2775				reg = <0 0x0ae97000 0 0x200>,
2776				      <0 0x0ae97200 0 0x280>,
2777				      <0 0x0ae97500 0 0x400>;
2778				reg-names = "dsi_phy",
2779					    "dsi_phy_lane",
2780					    "dsi_pll";
2781
2782				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2783					 <&rpmhcc RPMH_CXO_CLK>;
2784				clock-names = "iface", "ref";
2785
2786				#clock-cells = <1>;
2787				#phy-cells = <0>;
2788
2789				status = "disabled";
2790			};
2791		};
2792
2793		dispcc: clock-controller@af00000 {
2794			compatible = "qcom,sm8550-dispcc";
2795			reg = <0 0x0af00000 0 0x20000>;
2796			clocks = <&bi_tcxo_div2>,
2797				 <&bi_tcxo_ao_div2>,
2798				 <&gcc GCC_DISP_AHB_CLK>,
2799				 <&sleep_clk>,
2800				 <&mdss_dsi0_phy 0>,
2801				 <&mdss_dsi0_phy 1>,
2802				 <&mdss_dsi1_phy 0>,
2803				 <&mdss_dsi1_phy 1>,
2804				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2805				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
2806				 <0>, /* dp1 */
2807				 <0>,
2808				 <0>, /* dp2 */
2809				 <0>,
2810				 <0>, /* dp3 */
2811				 <0>;
2812			power-domains = <&rpmhpd RPMHPD_MMCX>;
2813			required-opps = <&rpmhpd_opp_low_svs>;
2814			#clock-cells = <1>;
2815			#reset-cells = <1>;
2816			#power-domain-cells = <1>;
2817		};
2818
2819		usb_1_hsphy: phy@88e3000 {
2820			compatible = "qcom,sm8550-snps-eusb2-phy";
2821			reg = <0x0 0x088e3000 0x0 0x154>;
2822			#phy-cells = <0>;
2823
2824			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
2825			clock-names = "ref";
2826
2827			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2828
2829			status = "disabled";
2830		};
2831
2832		usb_dp_qmpphy: phy@88e8000 {
2833			compatible = "qcom,sm8550-qmp-usb3-dp-phy";
2834			reg = <0x0 0x088e8000 0x0 0x3000>;
2835
2836			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2837				 <&rpmhcc RPMH_CXO_CLK>,
2838				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
2839				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2840			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
2841
2842			power-domains = <&gcc USB3_PHY_GDSC>;
2843
2844			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
2845				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
2846			reset-names = "phy", "common";
2847
2848			#clock-cells = <1>;
2849			#phy-cells = <1>;
2850
2851			status = "disabled";
2852
2853			ports {
2854				#address-cells = <1>;
2855				#size-cells = <0>;
2856
2857				port@0 {
2858					reg = <0>;
2859
2860					usb_dp_qmpphy_out: endpoint {
2861					};
2862				};
2863
2864				port@1 {
2865					reg = <1>;
2866
2867					usb_dp_qmpphy_usb_ss_in: endpoint {
2868					};
2869				};
2870
2871				port@2 {
2872					reg = <2>;
2873
2874					usb_dp_qmpphy_dp_in: endpoint {
2875					};
2876				};
2877			};
2878		};
2879
2880		usb_1: usb@a6f8800 {
2881			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
2882			reg = <0x0 0x0a6f8800 0x0 0x400>;
2883			#address-cells = <2>;
2884			#size-cells = <2>;
2885			ranges;
2886
2887			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2888				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2889				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2890				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2891				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2892				 <&tcsr TCSR_USB3_CLKREF_EN>;
2893			clock-names = "cfg_noc",
2894				      "core",
2895				      "iface",
2896				      "sleep",
2897				      "mock_utmi",
2898				      "xo";
2899
2900			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2901					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2902			assigned-clock-rates = <19200000>, <200000000>;
2903
2904			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
2905					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
2906					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
2907					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
2908			interrupt-names = "hs_phy_irq",
2909					  "ss_phy_irq",
2910					  "dm_hs_phy_irq",
2911					  "dp_hs_phy_irq";
2912
2913			power-domains = <&gcc USB30_PRIM_GDSC>;
2914			required-opps = <&rpmhpd_opp_nom>;
2915
2916			resets = <&gcc GCC_USB30_PRIM_BCR>;
2917
2918			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
2919					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
2920			interconnect-names = "usb-ddr", "apps-usb";
2921
2922			status = "disabled";
2923
2924			usb_1_dwc3: usb@a600000 {
2925				compatible = "snps,dwc3";
2926				reg = <0x0 0x0a600000 0x0 0xcd00>;
2927				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2928				iommus = <&apps_smmu 0x40 0x0>;
2929				snps,dis_u2_susphy_quirk;
2930				snps,dis_enblslpm_quirk;
2931				snps,usb3_lpm_capable;
2932				phys = <&usb_1_hsphy>,
2933				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
2934				phy-names = "usb2-phy", "usb3-phy";
2935
2936				ports {
2937					#address-cells = <1>;
2938					#size-cells = <0>;
2939
2940					port@0 {
2941						reg = <0>;
2942
2943						usb_1_dwc3_hs: endpoint {
2944						};
2945					};
2946
2947					port@1 {
2948						reg = <1>;
2949
2950						usb_1_dwc3_ss: endpoint {
2951						};
2952					};
2953				};
2954			};
2955		};
2956
2957		pdc: interrupt-controller@b220000 {
2958			compatible = "qcom,sm8550-pdc", "qcom,pdc";
2959			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
2960			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
2961					  <125 63 1>, <126 716 12>,
2962					  <138 251 5>;
2963			#interrupt-cells = <2>;
2964			interrupt-parent = <&intc>;
2965			interrupt-controller;
2966		};
2967
2968		tsens0: thermal-sensor@c271000 {
2969			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2970			reg = <0 0x0c271000 0 0x1000>, /* TM */
2971			      <0 0x0c222000 0 0x1000>; /* SROT */
2972			#qcom,sensors = <16>;
2973			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
2974				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
2975			interrupt-names = "uplow", "critical";
2976			#thermal-sensor-cells = <1>;
2977		};
2978
2979		tsens1: thermal-sensor@c272000 {
2980			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2981			reg = <0 0x0c272000 0 0x1000>, /* TM */
2982			      <0 0x0c223000 0 0x1000>; /* SROT */
2983			#qcom,sensors = <16>;
2984			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
2985				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
2986			interrupt-names = "uplow", "critical";
2987			#thermal-sensor-cells = <1>;
2988		};
2989
2990		tsens2: thermal-sensor@c273000 {
2991			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2992			reg = <0 0x0c273000 0 0x1000>, /* TM */
2993			      <0 0x0c224000 0 0x1000>; /* SROT */
2994			#qcom,sensors = <16>;
2995			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
2996				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
2997			interrupt-names = "uplow", "critical";
2998			#thermal-sensor-cells = <1>;
2999		};
3000
3001		aoss_qmp: power-management@c300000 {
3002			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
3003			reg = <0 0x0c300000 0 0x400>;
3004			interrupt-parent = <&ipcc>;
3005			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
3006						     IRQ_TYPE_EDGE_RISING>;
3007			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
3008
3009			#clock-cells = <0>;
3010		};
3011
3012		sram@c3f0000 {
3013			compatible = "qcom,rpmh-stats";
3014			reg = <0 0x0c3f0000 0 0x400>;
3015		};
3016
3017		spmi_bus: spmi@c400000 {
3018			compatible = "qcom,spmi-pmic-arb";
3019			reg = <0 0x0c400000 0 0x3000>,
3020			      <0 0x0c500000 0 0x400000>,
3021			      <0 0x0c440000 0 0x80000>,
3022			      <0 0x0c4c0000 0 0x20000>,
3023			      <0 0x0c42d000 0 0x4000>;
3024			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3025			interrupt-names = "periph_irq";
3026			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3027			qcom,ee = <0>;
3028			qcom,channel = <0>;
3029			qcom,bus-id = <0>;
3030			#address-cells = <2>;
3031			#size-cells = <0>;
3032			interrupt-controller;
3033			#interrupt-cells = <4>;
3034		};
3035
3036		tlmm: pinctrl@f100000 {
3037			compatible = "qcom,sm8550-tlmm";
3038			reg = <0 0x0f100000 0 0x300000>;
3039			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3040			gpio-controller;
3041			#gpio-cells = <2>;
3042			interrupt-controller;
3043			#interrupt-cells = <2>;
3044			gpio-ranges = <&tlmm 0 0 211>;
3045			wakeup-parent = <&pdc>;
3046
3047			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
3048				/* SDA, SCL */
3049				pins = "gpio16", "gpio17";
3050				function = "i2chub0_se0";
3051				drive-strength = <2>;
3052				bias-pull-up;
3053			};
3054
3055			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
3056				/* SDA, SCL */
3057				pins = "gpio18", "gpio19";
3058				function = "i2chub0_se1";
3059				drive-strength = <2>;
3060				bias-pull-up;
3061			};
3062
3063			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
3064				/* SDA, SCL */
3065				pins = "gpio20", "gpio21";
3066				function = "i2chub0_se2";
3067				drive-strength = <2>;
3068				bias-pull-up;
3069			};
3070
3071			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
3072				/* SDA, SCL */
3073				pins = "gpio22", "gpio23";
3074				function = "i2chub0_se3";
3075				drive-strength = <2>;
3076				bias-pull-up;
3077			};
3078
3079			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
3080				/* SDA, SCL */
3081				pins = "gpio4", "gpio5";
3082				function = "i2chub0_se4";
3083				drive-strength = <2>;
3084				bias-pull-up;
3085			};
3086
3087			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
3088				/* SDA, SCL */
3089				pins = "gpio6", "gpio7";
3090				function = "i2chub0_se5";
3091				drive-strength = <2>;
3092				bias-pull-up;
3093			};
3094
3095			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
3096				/* SDA, SCL */
3097				pins = "gpio8", "gpio9";
3098				function = "i2chub0_se6";
3099				drive-strength = <2>;
3100				bias-pull-up;
3101			};
3102
3103			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
3104				/* SDA, SCL */
3105				pins = "gpio10", "gpio11";
3106				function = "i2chub0_se7";
3107				drive-strength = <2>;
3108				bias-pull-up;
3109			};
3110
3111			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
3112				/* SDA, SCL */
3113				pins = "gpio206", "gpio207";
3114				function = "i2chub0_se8";
3115				drive-strength = <2>;
3116				bias-pull-up;
3117			};
3118
3119			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
3120				/* SDA, SCL */
3121				pins = "gpio84", "gpio85";
3122				function = "i2chub0_se9";
3123				drive-strength = <2>;
3124				bias-pull-up;
3125			};
3126
3127			pcie0_default_state: pcie0-default-state {
3128				perst-pins {
3129					pins = "gpio94";
3130					function = "gpio";
3131					drive-strength = <2>;
3132					bias-pull-down;
3133				};
3134
3135				clkreq-pins {
3136					pins = "gpio95";
3137					function = "pcie0_clk_req_n";
3138					drive-strength = <2>;
3139					bias-pull-up;
3140				};
3141
3142				wake-pins {
3143					pins = "gpio96";
3144					function = "gpio";
3145					drive-strength = <2>;
3146					bias-pull-up;
3147				};
3148			};
3149
3150			pcie1_default_state: pcie1-default-state {
3151				perst-pins {
3152					pins = "gpio97";
3153					function = "gpio";
3154					drive-strength = <2>;
3155					bias-pull-down;
3156				};
3157
3158				clkreq-pins {
3159					pins = "gpio98";
3160					function = "pcie1_clk_req_n";
3161					drive-strength = <2>;
3162					bias-pull-up;
3163				};
3164
3165				wake-pins {
3166					pins = "gpio99";
3167					function = "gpio";
3168					drive-strength = <2>;
3169					bias-pull-up;
3170				};
3171			};
3172
3173			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
3174				/* SDA, SCL */
3175				pins = "gpio28", "gpio29";
3176				function = "qup1_se0";
3177				drive-strength = <2>;
3178				bias-pull-up = <2200>;
3179			};
3180
3181			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
3182				/* SDA, SCL */
3183				pins = "gpio32", "gpio33";
3184				function = "qup1_se1";
3185				drive-strength = <2>;
3186				bias-pull-up = <2200>;
3187			};
3188
3189			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
3190				/* SDA, SCL */
3191				pins = "gpio36", "gpio37";
3192				function = "qup1_se2";
3193				drive-strength = <2>;
3194				bias-pull-up = <2200>;
3195			};
3196
3197			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
3198				/* SDA, SCL */
3199				pins = "gpio40", "gpio41";
3200				function = "qup1_se3";
3201				drive-strength = <2>;
3202				bias-pull-up = <2200>;
3203			};
3204
3205			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
3206				/* SDA, SCL */
3207				pins = "gpio44", "gpio45";
3208				function = "qup1_se4";
3209				drive-strength = <2>;
3210				bias-pull-up = <2200>;
3211			};
3212
3213			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
3214				/* SDA, SCL */
3215				pins = "gpio52", "gpio53";
3216				function = "qup1_se5";
3217				drive-strength = <2>;
3218				bias-pull-up = <2200>;
3219			};
3220
3221			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
3222				/* SDA, SCL */
3223				pins = "gpio48", "gpio49";
3224				function = "qup1_se6";
3225				drive-strength = <2>;
3226				bias-pull-up = <2200>;
3227			};
3228
3229			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
3230				scl-pins {
3231					pins = "gpio57";
3232					function = "qup2_se0_l1_mira";
3233					drive-strength = <2>;
3234					bias-pull-up = <2200>;
3235				};
3236
3237				sda-pins {
3238					pins = "gpio56";
3239					function = "qup2_se0_l0_mira";
3240					drive-strength = <2>;
3241					bias-pull-up = <2200>;
3242				};
3243			};
3244
3245			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
3246				/* SDA, SCL */
3247				pins = "gpio60", "gpio61";
3248				function = "qup2_se1";
3249				drive-strength = <2>;
3250				bias-pull-up = <2200>;
3251			};
3252
3253			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
3254				/* SDA, SCL */
3255				pins = "gpio64", "gpio65";
3256				function = "qup2_se2";
3257				drive-strength = <2>;
3258				bias-pull-up = <2200>;
3259			};
3260
3261			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
3262				/* SDA, SCL */
3263				pins = "gpio68", "gpio69";
3264				function = "qup2_se3";
3265				drive-strength = <2>;
3266				bias-pull-up = <2200>;
3267			};
3268
3269			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
3270				/* SDA, SCL */
3271				pins = "gpio2", "gpio3";
3272				function = "qup2_se4";
3273				drive-strength = <2>;
3274				bias-pull-up = <2200>;
3275			};
3276
3277			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
3278				/* SDA, SCL */
3279				pins = "gpio80", "gpio81";
3280				function = "qup2_se5";
3281				drive-strength = <2>;
3282				bias-pull-up = <2200>;
3283			};
3284
3285			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
3286				/* SDA, SCL */
3287				pins = "gpio72", "gpio106";
3288				function = "qup2_se7";
3289				drive-strength = <2>;
3290				bias-pull-up = <2200>;
3291			};
3292
3293			qup_spi0_cs: qup-spi0-cs-state {
3294				pins = "gpio31";
3295				function = "qup1_se0";
3296				drive-strength = <6>;
3297				bias-disable;
3298			};
3299
3300			qup_spi0_data_clk: qup-spi0-data-clk-state {
3301				/* MISO, MOSI, CLK */
3302				pins = "gpio28", "gpio29", "gpio30";
3303				function = "qup1_se0";
3304				drive-strength = <6>;
3305				bias-disable;
3306			};
3307
3308			qup_spi1_cs: qup-spi1-cs-state {
3309				pins = "gpio35";
3310				function = "qup1_se1";
3311				drive-strength = <6>;
3312				bias-disable;
3313			};
3314
3315			qup_spi1_data_clk: qup-spi1-data-clk-state {
3316				/* MISO, MOSI, CLK */
3317				pins = "gpio32", "gpio33", "gpio34";
3318				function = "qup1_se1";
3319				drive-strength = <6>;
3320				bias-disable;
3321			};
3322
3323			qup_spi2_cs: qup-spi2-cs-state {
3324				pins = "gpio39";
3325				function = "qup1_se2";
3326				drive-strength = <6>;
3327				bias-disable;
3328			};
3329
3330			qup_spi2_data_clk: qup-spi2-data-clk-state {
3331				/* MISO, MOSI, CLK */
3332				pins = "gpio36", "gpio37", "gpio38";
3333				function = "qup1_se2";
3334				drive-strength = <6>;
3335				bias-disable;
3336			};
3337
3338			qup_spi3_cs: qup-spi3-cs-state {
3339				pins = "gpio43";
3340				function = "qup1_se3";
3341				drive-strength = <6>;
3342				bias-disable;
3343			};
3344
3345			qup_spi3_data_clk: qup-spi3-data-clk-state {
3346				/* MISO, MOSI, CLK */
3347				pins = "gpio40", "gpio41", "gpio42";
3348				function = "qup1_se3";
3349				drive-strength = <6>;
3350				bias-disable;
3351			};
3352
3353			qup_spi4_cs: qup-spi4-cs-state {
3354				pins = "gpio47";
3355				function = "qup1_se4";
3356				drive-strength = <6>;
3357				bias-disable;
3358			};
3359
3360			qup_spi4_data_clk: qup-spi4-data-clk-state {
3361				/* MISO, MOSI, CLK */
3362				pins = "gpio44", "gpio45", "gpio46";
3363				function = "qup1_se4";
3364				drive-strength = <6>;
3365				bias-disable;
3366			};
3367
3368			qup_spi5_cs: qup-spi5-cs-state {
3369				pins = "gpio55";
3370				function = "qup1_se5";
3371				drive-strength = <6>;
3372				bias-disable;
3373			};
3374
3375			qup_spi5_data_clk: qup-spi5-data-clk-state {
3376				/* MISO, MOSI, CLK */
3377				pins = "gpio52", "gpio53", "gpio54";
3378				function = "qup1_se5";
3379				drive-strength = <6>;
3380				bias-disable;
3381			};
3382
3383			qup_spi6_cs: qup-spi6-cs-state {
3384				pins = "gpio51";
3385				function = "qup1_se6";
3386				drive-strength = <6>;
3387				bias-disable;
3388			};
3389
3390			qup_spi6_data_clk: qup-spi6-data-clk-state {
3391				/* MISO, MOSI, CLK */
3392				pins = "gpio48", "gpio49", "gpio50";
3393				function = "qup1_se6";
3394				drive-strength = <6>;
3395				bias-disable;
3396			};
3397
3398			qup_spi8_cs: qup-spi8-cs-state {
3399				pins = "gpio59";
3400				function = "qup2_se0_l3_mira";
3401				drive-strength = <6>;
3402				bias-disable;
3403			};
3404
3405			qup_spi8_data_clk: qup-spi8-data-clk-state {
3406				/* MISO, MOSI, CLK */
3407				pins = "gpio56", "gpio57", "gpio58";
3408				function = "qup2_se0_l2_mira";
3409				drive-strength = <6>;
3410				bias-disable;
3411			};
3412
3413			qup_spi9_cs: qup-spi9-cs-state {
3414				pins = "gpio63";
3415				function = "qup2_se1";
3416				drive-strength = <6>;
3417				bias-disable;
3418			};
3419
3420			qup_spi9_data_clk: qup-spi9-data-clk-state {
3421				/* MISO, MOSI, CLK */
3422				pins = "gpio60", "gpio61", "gpio62";
3423				function = "qup2_se1";
3424				drive-strength = <6>;
3425				bias-disable;
3426			};
3427
3428			qup_spi10_cs: qup-spi10-cs-state {
3429				pins = "gpio67";
3430				function = "qup2_se2";
3431				drive-strength = <6>;
3432				bias-disable;
3433			};
3434
3435			qup_spi10_data_clk: qup-spi10-data-clk-state {
3436				/* MISO, MOSI, CLK */
3437				pins = "gpio64", "gpio65", "gpio66";
3438				function = "qup2_se2";
3439				drive-strength = <6>;
3440				bias-disable;
3441			};
3442
3443			qup_spi11_cs: qup-spi11-cs-state {
3444				pins = "gpio71";
3445				function = "qup2_se3";
3446				drive-strength = <6>;
3447				bias-disable;
3448			};
3449
3450			qup_spi11_data_clk: qup-spi11-data-clk-state {
3451				/* MISO, MOSI, CLK */
3452				pins = "gpio68", "gpio69", "gpio70";
3453				function = "qup2_se3";
3454				drive-strength = <6>;
3455				bias-disable;
3456			};
3457
3458			qup_spi12_cs: qup-spi12-cs-state {
3459				pins = "gpio119";
3460				function = "qup2_se4";
3461				drive-strength = <6>;
3462				bias-disable;
3463			};
3464
3465			qup_spi12_data_clk: qup-spi12-data-clk-state {
3466				/* MISO, MOSI, CLK */
3467				pins = "gpio2", "gpio3", "gpio118";
3468				function = "qup2_se4";
3469				drive-strength = <6>;
3470				bias-disable;
3471			};
3472
3473			qup_spi13_cs: qup-spi13-cs-state {
3474				pins = "gpio83";
3475				function = "qup2_se5";
3476				drive-strength = <6>;
3477				bias-disable;
3478			};
3479
3480			qup_spi13_data_clk: qup-spi13-data-clk-state {
3481				/* MISO, MOSI, CLK */
3482				pins = "gpio80", "gpio81", "gpio82";
3483				function = "qup2_se5";
3484				drive-strength = <6>;
3485				bias-disable;
3486			};
3487
3488			qup_spi15_cs: qup-spi15-cs-state {
3489				pins = "gpio75";
3490				function = "qup2_se7";
3491				drive-strength = <6>;
3492				bias-disable;
3493			};
3494
3495			qup_spi15_data_clk: qup-spi15-data-clk-state {
3496				/* MISO, MOSI, CLK */
3497				pins = "gpio72", "gpio106", "gpio74";
3498				function = "qup2_se7";
3499				drive-strength = <6>;
3500				bias-disable;
3501			};
3502
3503			qup_uart7_default: qup-uart7-default-state {
3504				/* TX, RX */
3505				pins = "gpio26", "gpio27";
3506				function = "qup1_se7";
3507				drive-strength = <2>;
3508				bias-disable;
3509			};
3510
3511			sdc2_sleep: sdc2-sleep-state {
3512				clk-pins {
3513					pins = "sdc2_clk";
3514					bias-disable;
3515					drive-strength = <2>;
3516				};
3517
3518				cmd-pins {
3519					pins = "sdc2_cmd";
3520					bias-pull-up;
3521					drive-strength = <2>;
3522				};
3523
3524				data-pins {
3525					pins = "sdc2_data";
3526					bias-pull-up;
3527					drive-strength = <2>;
3528				};
3529			};
3530
3531			sdc2_default: sdc2-default-state {
3532				clk-pins {
3533					pins = "sdc2_clk";
3534					bias-disable;
3535					drive-strength = <16>;
3536				};
3537
3538				cmd-pins {
3539					pins = "sdc2_cmd";
3540					bias-pull-up;
3541					drive-strength = <10>;
3542				};
3543
3544				data-pins {
3545					pins = "sdc2_data";
3546					bias-pull-up;
3547					drive-strength = <10>;
3548				};
3549			};
3550		};
3551
3552		apps_smmu: iommu@15000000 {
3553			compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
3554			reg = <0 0x15000000 0 0x100000>;
3555			#iommu-cells = <2>;
3556			#global-interrupts = <1>;
3557			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3558				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3559				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3560				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3561				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3562				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3563				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3564				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3565				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3566				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3567				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3568				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3569				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3570				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3571				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3572				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3573				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3574				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3575				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3576				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3577				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3578				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3579				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3580				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3581				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3582				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3583				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3584				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3585				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3586				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3587				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3588				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3589				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3590				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3591				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3592				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3593				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3594				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3595				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3596				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3597				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3598				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3599				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3600				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3601				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3602				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3603				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3604				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3605				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3606				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3607				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3608				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3609				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3610				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3611				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3612				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3613				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3614				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3615				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3616				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3617				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3618				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3619				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3620				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3621				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3622				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3623				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
3624				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
3625				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
3626				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
3627				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
3628				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
3629				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3630				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3631				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3632				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3633				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3634				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3635				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3636				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3637				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3638				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3639				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3640				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
3641				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3642				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
3643				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3644				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3645				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
3646				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
3647				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
3648				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
3649				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
3650				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
3651				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
3652				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
3653				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
3654		};
3655
3656		intc: interrupt-controller@17100000 {
3657			compatible = "arm,gic-v3";
3658			reg = <0 0x17100000 0 0x10000>,		/* GICD */
3659			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
3660			ranges;
3661			#interrupt-cells = <3>;
3662			interrupt-controller;
3663			#redistributor-regions = <1>;
3664			redistributor-stride = <0 0x40000>;
3665			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
3666			#address-cells = <2>;
3667			#size-cells = <2>;
3668
3669			gic_its: msi-controller@17140000 {
3670				compatible = "arm,gic-v3-its";
3671				reg = <0 0x17140000 0 0x20000>;
3672				msi-controller;
3673				#msi-cells = <1>;
3674			};
3675		};
3676
3677		timer@17420000 {
3678			compatible = "arm,armv7-timer-mem";
3679			reg = <0 0x17420000 0 0x1000>;
3680			ranges = <0 0 0 0x20000000>;
3681			#address-cells = <1>;
3682			#size-cells = <1>;
3683
3684			frame@17421000 {
3685				reg = <0x17421000 0x1000>,
3686				      <0x17422000 0x1000>;
3687				frame-number = <0>;
3688				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3689					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3690			};
3691
3692			frame@17423000 {
3693				reg = <0x17423000 0x1000>;
3694				frame-number = <1>;
3695				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3696				status = "disabled";
3697			};
3698
3699			frame@17425000 {
3700				reg = <0x17425000 0x1000>;
3701				frame-number = <2>;
3702				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3703				status = "disabled";
3704			};
3705
3706			frame@17427000 {
3707				reg = <0x17427000 0x1000>;
3708				frame-number = <3>;
3709				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3710				status = "disabled";
3711			};
3712
3713			frame@17429000 {
3714				reg = <0x17429000 0x1000>;
3715				frame-number = <4>;
3716				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3717				status = "disabled";
3718			};
3719
3720			frame@1742b000 {
3721				reg = <0x1742b000 0x1000>;
3722				frame-number = <5>;
3723				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3724				status = "disabled";
3725			};
3726
3727			frame@1742d000 {
3728				reg = <0x1742d000 0x1000>;
3729				frame-number = <6>;
3730				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3731				status = "disabled";
3732			};
3733		};
3734
3735		apps_rsc: rsc@17a00000 {
3736			label = "apps_rsc";
3737			compatible = "qcom,rpmh-rsc";
3738			reg = <0 0x17a00000 0 0x10000>,
3739			      <0 0x17a10000 0 0x10000>,
3740			      <0 0x17a20000 0 0x10000>,
3741			      <0 0x17a30000 0 0x10000>;
3742			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
3743			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3744				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3745				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3746			qcom,tcs-offset = <0xd00>;
3747			qcom,drv-id = <2>;
3748			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
3749					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
3750			power-domains = <&CLUSTER_PD>;
3751
3752			apps_bcm_voter: bcm-voter {
3753				compatible = "qcom,bcm-voter";
3754			};
3755
3756			rpmhcc: clock-controller {
3757				compatible = "qcom,sm8550-rpmh-clk";
3758				#clock-cells = <1>;
3759				clock-names = "xo";
3760				clocks = <&xo_board>;
3761			};
3762
3763			rpmhpd: power-controller {
3764				compatible = "qcom,sm8550-rpmhpd";
3765				#power-domain-cells = <1>;
3766				operating-points-v2 = <&rpmhpd_opp_table>;
3767
3768				rpmhpd_opp_table: opp-table {
3769					compatible = "operating-points-v2";
3770
3771					rpmhpd_opp_ret: opp-16 {
3772						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3773					};
3774
3775					rpmhpd_opp_min_svs: opp-48 {
3776						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3777					};
3778
3779					rpmhpd_opp_low_svs_d2: opp-52 {
3780						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
3781					};
3782
3783					rpmhpd_opp_low_svs_d1: opp-56 {
3784						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
3785					};
3786
3787					rpmhpd_opp_low_svs_d0: opp-60 {
3788						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
3789					};
3790
3791					rpmhpd_opp_low_svs: opp-64 {
3792						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3793					};
3794
3795					rpmhpd_opp_low_svs_l1: opp-80 {
3796						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
3797					};
3798
3799					rpmhpd_opp_svs: opp-128 {
3800						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3801					};
3802
3803					rpmhpd_opp_svs_l0: opp-144 {
3804						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
3805					};
3806
3807					rpmhpd_opp_svs_l1: opp-192 {
3808						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3809					};
3810
3811					rpmhpd_opp_nom: opp-256 {
3812						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3813					};
3814
3815					rpmhpd_opp_nom_l1: opp-320 {
3816						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3817					};
3818
3819					rpmhpd_opp_nom_l2: opp-336 {
3820						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3821					};
3822
3823					rpmhpd_opp_turbo: opp-384 {
3824						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3825					};
3826
3827					rpmhpd_opp_turbo_l1: opp-416 {
3828						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3829					};
3830				};
3831			};
3832		};
3833
3834		cpufreq_hw: cpufreq@17d91000 {
3835			compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
3836			reg = <0 0x17d91000 0 0x1000>,
3837			      <0 0x17d92000 0 0x1000>,
3838			      <0 0x17d93000 0 0x1000>;
3839			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
3840			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
3841			clock-names = "xo", "alternate";
3842			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
3843				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
3844				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
3845			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
3846			#freq-domain-cells = <1>;
3847			#clock-cells = <1>;
3848		};
3849
3850		pmu@24091000 {
3851			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
3852			reg = <0 0x24091000 0 0x1000>;
3853			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
3854			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
3855
3856			operating-points-v2 = <&llcc_bwmon_opp_table>;
3857
3858			llcc_bwmon_opp_table: opp-table {
3859				compatible = "operating-points-v2";
3860
3861				opp-0 {
3862					opp-peak-kBps = <2086000>;
3863				};
3864
3865				opp-1 {
3866					opp-peak-kBps = <2929000>;
3867				};
3868
3869				opp-2 {
3870					opp-peak-kBps = <5931000>;
3871				};
3872
3873				opp-3 {
3874					opp-peak-kBps = <6515000>;
3875				};
3876
3877				opp-4 {
3878					opp-peak-kBps = <7980000>;
3879				};
3880
3881				opp-5 {
3882					opp-peak-kBps = <10437000>;
3883				};
3884
3885				opp-6 {
3886					opp-peak-kBps = <12157000>;
3887				};
3888
3889				opp-7 {
3890					opp-peak-kBps = <14060000>;
3891				};
3892
3893				opp-8 {
3894					opp-peak-kBps = <16113000>;
3895				};
3896			};
3897		};
3898
3899		pmu@240b6400 {
3900			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
3901			reg = <0 0x240b6400 0 0x600>;
3902			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
3903			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
3904
3905			operating-points-v2 = <&cpu_bwmon_opp_table>;
3906
3907			cpu_bwmon_opp_table: opp-table {
3908				compatible = "operating-points-v2";
3909
3910				opp-0 {
3911					opp-peak-kBps = <4577000>;
3912				};
3913
3914				opp-1 {
3915					opp-peak-kBps = <7110000>;
3916				};
3917
3918				opp-2 {
3919					opp-peak-kBps = <9155000>;
3920				};
3921
3922				opp-3 {
3923					opp-peak-kBps = <12298000>;
3924				};
3925
3926				opp-4 {
3927					opp-peak-kBps = <14236000>;
3928				};
3929
3930				opp-5 {
3931					opp-peak-kBps = <16265000>;
3932				};
3933			};
3934		};
3935
3936		gem_noc: interconnect@24100000 {
3937			compatible = "qcom,sm8550-gem-noc";
3938			reg = <0 0x24100000 0 0xbb800>;
3939			#interconnect-cells = <2>;
3940			qcom,bcm-voters = <&apps_bcm_voter>;
3941		};
3942
3943		system-cache-controller@25000000 {
3944			compatible = "qcom,sm8550-llcc";
3945			reg = <0 0x25000000 0 0x200000>,
3946			      <0 0x25200000 0 0x200000>,
3947			      <0 0x25400000 0 0x200000>,
3948			      <0 0x25600000 0 0x200000>,
3949			      <0 0x25800000 0 0x200000>;
3950			reg-names = "llcc0_base",
3951				    "llcc1_base",
3952				    "llcc2_base",
3953				    "llcc3_base",
3954				    "llcc_broadcast_base";
3955			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
3956		};
3957
3958		remoteproc_adsp: remoteproc@30000000 {
3959			compatible = "qcom,sm8550-adsp-pas";
3960			reg = <0x0 0x30000000 0x0 0x100>;
3961
3962			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
3963					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
3964					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
3965					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
3966					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
3967			interrupt-names = "wdog", "fatal", "ready",
3968					  "handover", "stop-ack";
3969
3970			clocks = <&rpmhcc RPMH_CXO_CLK>;
3971			clock-names = "xo";
3972
3973			power-domains = <&rpmhpd RPMHPD_LCX>,
3974					<&rpmhpd RPMHPD_LMX>;
3975			power-domain-names = "lcx", "lmx";
3976
3977			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
3978
3979			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
3980
3981			qcom,qmp = <&aoss_qmp>;
3982
3983			qcom,smem-states = <&smp2p_adsp_out 0>;
3984			qcom,smem-state-names = "stop";
3985
3986			status = "disabled";
3987
3988			remoteproc_adsp_glink: glink-edge {
3989				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
3990							     IPCC_MPROC_SIGNAL_GLINK_QMP
3991							     IRQ_TYPE_EDGE_RISING>;
3992				mboxes = <&ipcc IPCC_CLIENT_LPASS
3993						IPCC_MPROC_SIGNAL_GLINK_QMP>;
3994
3995				label = "lpass";
3996				qcom,remote-pid = <2>;
3997
3998				fastrpc {
3999					compatible = "qcom,fastrpc";
4000					qcom,glink-channels = "fastrpcglink-apps-dsp";
4001					label = "adsp";
4002					#address-cells = <1>;
4003					#size-cells = <0>;
4004
4005					compute-cb@3 {
4006						compatible = "qcom,fastrpc-compute-cb";
4007						reg = <3>;
4008						iommus = <&apps_smmu 0x1003 0x80>,
4009							 <&apps_smmu 0x1063 0x0>;
4010					};
4011
4012					compute-cb@4 {
4013						compatible = "qcom,fastrpc-compute-cb";
4014						reg = <4>;
4015						iommus = <&apps_smmu 0x1004 0x80>,
4016							 <&apps_smmu 0x1064 0x0>;
4017					};
4018
4019					compute-cb@5 {
4020						compatible = "qcom,fastrpc-compute-cb";
4021						reg = <5>;
4022						iommus = <&apps_smmu 0x1005 0x80>,
4023							 <&apps_smmu 0x1065 0x0>;
4024					};
4025
4026					compute-cb@6 {
4027						compatible = "qcom,fastrpc-compute-cb";
4028						reg = <6>;
4029						iommus = <&apps_smmu 0x1006 0x80>,
4030							 <&apps_smmu 0x1066 0x0>;
4031					};
4032
4033					compute-cb@7 {
4034						compatible = "qcom,fastrpc-compute-cb";
4035						reg = <7>;
4036						iommus = <&apps_smmu 0x1007 0x80>,
4037							 <&apps_smmu 0x1067 0x0>;
4038					};
4039				};
4040
4041				gpr {
4042					compatible = "qcom,gpr";
4043					qcom,glink-channels = "adsp_apps";
4044					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
4045					qcom,intents = <512 20>;
4046					#address-cells = <1>;
4047					#size-cells = <0>;
4048
4049					q6apm: service@1 {
4050						compatible = "qcom,q6apm";
4051						reg = <GPR_APM_MODULE_IID>;
4052						#sound-dai-cells = <0>;
4053						qcom,protection-domain = "avs/audio",
4054									 "msm/adsp/audio_pd";
4055
4056						q6apmdai: dais {
4057							compatible = "qcom,q6apm-dais";
4058							iommus = <&apps_smmu 0x1001 0x80>,
4059								 <&apps_smmu 0x1061 0x0>;
4060						};
4061
4062						q6apmbedai: bedais {
4063							compatible = "qcom,q6apm-lpass-dais";
4064							#sound-dai-cells = <1>;
4065						};
4066					};
4067
4068					q6prm: service@2 {
4069						compatible = "qcom,q6prm";
4070						reg = <GPR_PRM_MODULE_IID>;
4071						qcom,protection-domain = "avs/audio",
4072									 "msm/adsp/audio_pd";
4073
4074						q6prmcc: clock-controller {
4075							compatible = "qcom,q6prm-lpass-clocks";
4076							#clock-cells = <2>;
4077						};
4078					};
4079				};
4080			};
4081		};
4082
4083		nsp_noc: interconnect@320c0000 {
4084			compatible = "qcom,sm8550-nsp-noc";
4085			reg = <0 0x320c0000 0 0xe080>;
4086			#interconnect-cells = <2>;
4087			qcom,bcm-voters = <&apps_bcm_voter>;
4088		};
4089
4090		remoteproc_cdsp: remoteproc@32300000 {
4091			compatible = "qcom,sm8550-cdsp-pas";
4092			reg = <0x0 0x32300000 0x0 0x1400000>;
4093
4094			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
4095					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
4096					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
4097					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
4098					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
4099			interrupt-names = "wdog", "fatal", "ready",
4100					  "handover", "stop-ack";
4101
4102			clocks = <&rpmhcc RPMH_CXO_CLK>;
4103			clock-names = "xo";
4104
4105			power-domains = <&rpmhpd RPMHPD_CX>,
4106					<&rpmhpd RPMHPD_MXC>,
4107					<&rpmhpd RPMHPD_NSP>;
4108			power-domain-names = "cx", "mxc", "nsp";
4109
4110			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
4111
4112			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
4113
4114			qcom,qmp = <&aoss_qmp>;
4115
4116			qcom,smem-states = <&smp2p_cdsp_out 0>;
4117			qcom,smem-state-names = "stop";
4118
4119			status = "disabled";
4120
4121			glink-edge {
4122				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
4123							     IPCC_MPROC_SIGNAL_GLINK_QMP
4124							     IRQ_TYPE_EDGE_RISING>;
4125				mboxes = <&ipcc IPCC_CLIENT_CDSP
4126						IPCC_MPROC_SIGNAL_GLINK_QMP>;
4127
4128				label = "cdsp";
4129				qcom,remote-pid = <5>;
4130
4131				fastrpc {
4132					compatible = "qcom,fastrpc";
4133					qcom,glink-channels = "fastrpcglink-apps-dsp";
4134					label = "cdsp";
4135					#address-cells = <1>;
4136					#size-cells = <0>;
4137
4138					compute-cb@1 {
4139						compatible = "qcom,fastrpc-compute-cb";
4140						reg = <1>;
4141						iommus = <&apps_smmu 0x1961 0x0>,
4142							 <&apps_smmu 0x0c01 0x20>,
4143							 <&apps_smmu 0x19c1 0x10>;
4144					};
4145
4146					compute-cb@2 {
4147						compatible = "qcom,fastrpc-compute-cb";
4148						reg = <2>;
4149						iommus = <&apps_smmu 0x1962 0x0>,
4150							 <&apps_smmu 0x0c02 0x20>,
4151							 <&apps_smmu 0x19c2 0x10>;
4152					};
4153
4154					compute-cb@3 {
4155						compatible = "qcom,fastrpc-compute-cb";
4156						reg = <3>;
4157						iommus = <&apps_smmu 0x1963 0x0>,
4158							 <&apps_smmu 0x0c03 0x20>,
4159							 <&apps_smmu 0x19c3 0x10>;
4160					};
4161
4162					compute-cb@4 {
4163						compatible = "qcom,fastrpc-compute-cb";
4164						reg = <4>;
4165						iommus = <&apps_smmu 0x1964 0x0>,
4166							 <&apps_smmu 0x0c04 0x20>,
4167							 <&apps_smmu 0x19c4 0x10>;
4168					};
4169
4170					compute-cb@5 {
4171						compatible = "qcom,fastrpc-compute-cb";
4172						reg = <5>;
4173						iommus = <&apps_smmu 0x1965 0x0>,
4174							 <&apps_smmu 0x0c05 0x20>,
4175							 <&apps_smmu 0x19c5 0x10>;
4176					};
4177
4178					compute-cb@6 {
4179						compatible = "qcom,fastrpc-compute-cb";
4180						reg = <6>;
4181						iommus = <&apps_smmu 0x1966 0x0>,
4182							 <&apps_smmu 0x0c06 0x20>,
4183							 <&apps_smmu 0x19c6 0x10>;
4184					};
4185
4186					compute-cb@7 {
4187						compatible = "qcom,fastrpc-compute-cb";
4188						reg = <7>;
4189						iommus = <&apps_smmu 0x1967 0x0>,
4190							 <&apps_smmu 0x0c07 0x20>,
4191							 <&apps_smmu 0x19c7 0x10>;
4192					};
4193
4194					compute-cb@8 {
4195						compatible = "qcom,fastrpc-compute-cb";
4196						reg = <8>;
4197						iommus = <&apps_smmu 0x1968 0x0>,
4198							 <&apps_smmu 0x0c08 0x20>,
4199							 <&apps_smmu 0x19c8 0x10>;
4200					};
4201
4202					/* note: secure cb9 in downstream */
4203				};
4204			};
4205		};
4206	};
4207
4208	thermal-zones {
4209		aoss0-thermal {
4210			polling-delay-passive = <0>;
4211			polling-delay = <0>;
4212			thermal-sensors = <&tsens0 0>;
4213
4214			trips {
4215				thermal-engine-config {
4216					temperature = <125000>;
4217					hysteresis = <1000>;
4218					type = "passive";
4219				};
4220
4221				reset-mon-config {
4222					temperature = <115000>;
4223					hysteresis = <5000>;
4224					type = "passive";
4225				};
4226			};
4227		};
4228
4229		cpuss0-thermal {
4230			polling-delay-passive = <0>;
4231			polling-delay = <0>;
4232			thermal-sensors = <&tsens0 1>;
4233
4234			trips {
4235				thermal-engine-config {
4236					temperature = <125000>;
4237					hysteresis = <1000>;
4238					type = "passive";
4239				};
4240
4241				reset-mon-config {
4242					temperature = <115000>;
4243					hysteresis = <5000>;
4244					type = "passive";
4245				};
4246			};
4247		};
4248
4249		cpuss1-thermal {
4250			polling-delay-passive = <0>;
4251			polling-delay = <0>;
4252			thermal-sensors = <&tsens0 2>;
4253
4254			trips {
4255				thermal-engine-config {
4256					temperature = <125000>;
4257					hysteresis = <1000>;
4258					type = "passive";
4259				};
4260
4261				reset-mon-config {
4262					temperature = <115000>;
4263					hysteresis = <5000>;
4264					type = "passive";
4265				};
4266			};
4267		};
4268
4269		cpuss2-thermal {
4270			polling-delay-passive = <0>;
4271			polling-delay = <0>;
4272			thermal-sensors = <&tsens0 3>;
4273
4274			trips {
4275				thermal-engine-config {
4276					temperature = <125000>;
4277					hysteresis = <1000>;
4278					type = "passive";
4279				};
4280
4281				reset-mon-config {
4282					temperature = <115000>;
4283					hysteresis = <5000>;
4284					type = "passive";
4285				};
4286			};
4287		};
4288
4289		cpuss3-thermal {
4290			polling-delay-passive = <0>;
4291			polling-delay = <0>;
4292			thermal-sensors = <&tsens0 4>;
4293
4294			trips {
4295				thermal-engine-config {
4296					temperature = <125000>;
4297					hysteresis = <1000>;
4298					type = "passive";
4299				};
4300
4301				reset-mon-config {
4302					temperature = <115000>;
4303					hysteresis = <5000>;
4304					type = "passive";
4305				};
4306			};
4307		};
4308
4309		cpu3-top-thermal {
4310			polling-delay-passive = <0>;
4311			polling-delay = <0>;
4312			thermal-sensors = <&tsens0 5>;
4313
4314			trips {
4315				cpu3_top_alert0: trip-point0 {
4316					temperature = <90000>;
4317					hysteresis = <2000>;
4318					type = "passive";
4319				};
4320
4321				cpu3_top_alert1: trip-point1 {
4322					temperature = <95000>;
4323					hysteresis = <2000>;
4324					type = "passive";
4325				};
4326
4327				cpu3_top_crit: cpu-critical {
4328					temperature = <110000>;
4329					hysteresis = <1000>;
4330					type = "critical";
4331				};
4332			};
4333		};
4334
4335		cpu3-bottom-thermal {
4336			polling-delay-passive = <0>;
4337			polling-delay = <0>;
4338			thermal-sensors = <&tsens0 6>;
4339
4340			trips {
4341				cpu3_bottom_alert0: trip-point0 {
4342					temperature = <90000>;
4343					hysteresis = <2000>;
4344					type = "passive";
4345				};
4346
4347				cpu3_bottom_alert1: trip-point1 {
4348					temperature = <95000>;
4349					hysteresis = <2000>;
4350					type = "passive";
4351				};
4352
4353				cpu3_bottom_crit: cpu-critical {
4354					temperature = <110000>;
4355					hysteresis = <1000>;
4356					type = "critical";
4357				};
4358			};
4359		};
4360
4361		cpu4-top-thermal {
4362			polling-delay-passive = <0>;
4363			polling-delay = <0>;
4364			thermal-sensors = <&tsens0 7>;
4365
4366			trips {
4367				cpu4_top_alert0: trip-point0 {
4368					temperature = <90000>;
4369					hysteresis = <2000>;
4370					type = "passive";
4371				};
4372
4373				cpu4_top_alert1: trip-point1 {
4374					temperature = <95000>;
4375					hysteresis = <2000>;
4376					type = "passive";
4377				};
4378
4379				cpu4_top_crit: cpu-critical {
4380					temperature = <110000>;
4381					hysteresis = <1000>;
4382					type = "critical";
4383				};
4384			};
4385		};
4386
4387		cpu4-bottom-thermal {
4388			polling-delay-passive = <0>;
4389			polling-delay = <0>;
4390			thermal-sensors = <&tsens0 8>;
4391
4392			trips {
4393				cpu4_bottom_alert0: trip-point0 {
4394					temperature = <90000>;
4395					hysteresis = <2000>;
4396					type = "passive";
4397				};
4398
4399				cpu4_bottom_alert1: trip-point1 {
4400					temperature = <95000>;
4401					hysteresis = <2000>;
4402					type = "passive";
4403				};
4404
4405				cpu4_bottom_crit: cpu-critical {
4406					temperature = <110000>;
4407					hysteresis = <1000>;
4408					type = "critical";
4409				};
4410			};
4411		};
4412
4413		cpu5-top-thermal {
4414			polling-delay-passive = <0>;
4415			polling-delay = <0>;
4416			thermal-sensors = <&tsens0 9>;
4417
4418			trips {
4419				cpu5_top_alert0: trip-point0 {
4420					temperature = <90000>;
4421					hysteresis = <2000>;
4422					type = "passive";
4423				};
4424
4425				cpu5_top_alert1: trip-point1 {
4426					temperature = <95000>;
4427					hysteresis = <2000>;
4428					type = "passive";
4429				};
4430
4431				cpu5_top_crit: cpu-critical {
4432					temperature = <110000>;
4433					hysteresis = <1000>;
4434					type = "critical";
4435				};
4436			};
4437		};
4438
4439		cpu5-bottom-thermal {
4440			polling-delay-passive = <0>;
4441			polling-delay = <0>;
4442			thermal-sensors = <&tsens0 10>;
4443
4444			trips {
4445				cpu5_bottom_alert0: trip-point0 {
4446					temperature = <90000>;
4447					hysteresis = <2000>;
4448					type = "passive";
4449				};
4450
4451				cpu5_bottom_alert1: trip-point1 {
4452					temperature = <95000>;
4453					hysteresis = <2000>;
4454					type = "passive";
4455				};
4456
4457				cpu5_bottom_crit: cpu-critical {
4458					temperature = <110000>;
4459					hysteresis = <1000>;
4460					type = "critical";
4461				};
4462			};
4463		};
4464
4465		cpu6-top-thermal {
4466			polling-delay-passive = <0>;
4467			polling-delay = <0>;
4468			thermal-sensors = <&tsens0 11>;
4469
4470			trips {
4471				cpu6_top_alert0: trip-point0 {
4472					temperature = <90000>;
4473					hysteresis = <2000>;
4474					type = "passive";
4475				};
4476
4477				cpu6_top_alert1: trip-point1 {
4478					temperature = <95000>;
4479					hysteresis = <2000>;
4480					type = "passive";
4481				};
4482
4483				cpu6_top_crit: cpu-critical {
4484					temperature = <110000>;
4485					hysteresis = <1000>;
4486					type = "critical";
4487				};
4488			};
4489		};
4490
4491		cpu6-bottom-thermal {
4492			polling-delay-passive = <0>;
4493			polling-delay = <0>;
4494			thermal-sensors = <&tsens0 12>;
4495
4496			trips {
4497				cpu6_bottom_alert0: trip-point0 {
4498					temperature = <90000>;
4499					hysteresis = <2000>;
4500					type = "passive";
4501				};
4502
4503				cpu6_bottom_alert1: trip-point1 {
4504					temperature = <95000>;
4505					hysteresis = <2000>;
4506					type = "passive";
4507				};
4508
4509				cpu6_bottom_crit: cpu-critical {
4510					temperature = <110000>;
4511					hysteresis = <1000>;
4512					type = "critical";
4513				};
4514			};
4515		};
4516
4517		cpu7-top-thermal {
4518			polling-delay-passive = <0>;
4519			polling-delay = <0>;
4520			thermal-sensors = <&tsens0 13>;
4521
4522			trips {
4523				cpu7_top_alert0: trip-point0 {
4524					temperature = <90000>;
4525					hysteresis = <2000>;
4526					type = "passive";
4527				};
4528
4529				cpu7_top_alert1: trip-point1 {
4530					temperature = <95000>;
4531					hysteresis = <2000>;
4532					type = "passive";
4533				};
4534
4535				cpu7_top_crit: cpu-critical {
4536					temperature = <110000>;
4537					hysteresis = <1000>;
4538					type = "critical";
4539				};
4540			};
4541		};
4542
4543		cpu7-middle-thermal {
4544			polling-delay-passive = <0>;
4545			polling-delay = <0>;
4546			thermal-sensors = <&tsens0 14>;
4547
4548			trips {
4549				cpu7_middle_alert0: trip-point0 {
4550					temperature = <90000>;
4551					hysteresis = <2000>;
4552					type = "passive";
4553				};
4554
4555				cpu7_middle_alert1: trip-point1 {
4556					temperature = <95000>;
4557					hysteresis = <2000>;
4558					type = "passive";
4559				};
4560
4561				cpu7_middle_crit: cpu-critical {
4562					temperature = <110000>;
4563					hysteresis = <1000>;
4564					type = "critical";
4565				};
4566			};
4567		};
4568
4569		cpu7-bottom-thermal {
4570			polling-delay-passive = <0>;
4571			polling-delay = <0>;
4572			thermal-sensors = <&tsens0 15>;
4573
4574			trips {
4575				cpu7_bottom_alert0: trip-point0 {
4576					temperature = <90000>;
4577					hysteresis = <2000>;
4578					type = "passive";
4579				};
4580
4581				cpu7_bottom_alert1: trip-point1 {
4582					temperature = <95000>;
4583					hysteresis = <2000>;
4584					type = "passive";
4585				};
4586
4587				cpu7_bottom_crit: cpu-critical {
4588					temperature = <110000>;
4589					hysteresis = <1000>;
4590					type = "critical";
4591				};
4592			};
4593		};
4594
4595		aoss1-thermal {
4596			polling-delay-passive = <0>;
4597			polling-delay = <0>;
4598			thermal-sensors = <&tsens1 0>;
4599
4600			trips {
4601				thermal-engine-config {
4602					temperature = <125000>;
4603					hysteresis = <1000>;
4604					type = "passive";
4605				};
4606
4607				reset-mon-config {
4608					temperature = <115000>;
4609					hysteresis = <5000>;
4610					type = "passive";
4611				};
4612			};
4613		};
4614
4615		cpu0-thermal {
4616			polling-delay-passive = <0>;
4617			polling-delay = <0>;
4618			thermal-sensors = <&tsens1 1>;
4619
4620			trips {
4621				cpu0_alert0: trip-point0 {
4622					temperature = <90000>;
4623					hysteresis = <2000>;
4624					type = "passive";
4625				};
4626
4627				cpu0_alert1: trip-point1 {
4628					temperature = <95000>;
4629					hysteresis = <2000>;
4630					type = "passive";
4631				};
4632
4633				cpu0_crit: cpu-critical {
4634					temperature = <110000>;
4635					hysteresis = <1000>;
4636					type = "critical";
4637				};
4638			};
4639		};
4640
4641		cpu1-thermal {
4642			polling-delay-passive = <0>;
4643			polling-delay = <0>;
4644			thermal-sensors = <&tsens1 2>;
4645
4646			trips {
4647				cpu1_alert0: trip-point0 {
4648					temperature = <90000>;
4649					hysteresis = <2000>;
4650					type = "passive";
4651				};
4652
4653				cpu1_alert1: trip-point1 {
4654					temperature = <95000>;
4655					hysteresis = <2000>;
4656					type = "passive";
4657				};
4658
4659				cpu1_crit: cpu-critical {
4660					temperature = <110000>;
4661					hysteresis = <1000>;
4662					type = "critical";
4663				};
4664			};
4665		};
4666
4667		cpu2-thermal {
4668			polling-delay-passive = <0>;
4669			polling-delay = <0>;
4670			thermal-sensors = <&tsens1 3>;
4671
4672			trips {
4673				cpu2_alert0: trip-point0 {
4674					temperature = <90000>;
4675					hysteresis = <2000>;
4676					type = "passive";
4677				};
4678
4679				cpu2_alert1: trip-point1 {
4680					temperature = <95000>;
4681					hysteresis = <2000>;
4682					type = "passive";
4683				};
4684
4685				cpu2_crit: cpu-critical {
4686					temperature = <110000>;
4687					hysteresis = <1000>;
4688					type = "critical";
4689				};
4690			};
4691		};
4692
4693		cdsp0-thermal {
4694			polling-delay-passive = <10>;
4695			polling-delay = <0>;
4696			thermal-sensors = <&tsens2 4>;
4697
4698			trips {
4699				thermal-engine-config {
4700					temperature = <125000>;
4701					hysteresis = <1000>;
4702					type = "passive";
4703				};
4704
4705				thermal-hal-config {
4706					temperature = <125000>;
4707					hysteresis = <1000>;
4708					type = "passive";
4709				};
4710
4711				reset-mon-config {
4712					temperature = <115000>;
4713					hysteresis = <5000>;
4714					type = "passive";
4715				};
4716
4717				cdsp0_junction_config: junction-config {
4718					temperature = <95000>;
4719					hysteresis = <5000>;
4720					type = "passive";
4721				};
4722			};
4723		};
4724
4725		cdsp1-thermal {
4726			polling-delay-passive = <10>;
4727			polling-delay = <0>;
4728			thermal-sensors = <&tsens2 5>;
4729
4730			trips {
4731				thermal-engine-config {
4732					temperature = <125000>;
4733					hysteresis = <1000>;
4734					type = "passive";
4735				};
4736
4737				thermal-hal-config {
4738					temperature = <125000>;
4739					hysteresis = <1000>;
4740					type = "passive";
4741				};
4742
4743				reset-mon-config {
4744					temperature = <115000>;
4745					hysteresis = <5000>;
4746					type = "passive";
4747				};
4748
4749				cdsp1_junction_config: junction-config {
4750					temperature = <95000>;
4751					hysteresis = <5000>;
4752					type = "passive";
4753				};
4754			};
4755		};
4756
4757		cdsp2-thermal {
4758			polling-delay-passive = <10>;
4759			polling-delay = <0>;
4760			thermal-sensors = <&tsens2 6>;
4761
4762			trips {
4763				thermal-engine-config {
4764					temperature = <125000>;
4765					hysteresis = <1000>;
4766					type = "passive";
4767				};
4768
4769				thermal-hal-config {
4770					temperature = <125000>;
4771					hysteresis = <1000>;
4772					type = "passive";
4773				};
4774
4775				reset-mon-config {
4776					temperature = <115000>;
4777					hysteresis = <5000>;
4778					type = "passive";
4779				};
4780
4781				cdsp2_junction_config: junction-config {
4782					temperature = <95000>;
4783					hysteresis = <5000>;
4784					type = "passive";
4785				};
4786			};
4787		};
4788
4789		cdsp3-thermal {
4790			polling-delay-passive = <10>;
4791			polling-delay = <0>;
4792			thermal-sensors = <&tsens2 7>;
4793
4794			trips {
4795				thermal-engine-config {
4796					temperature = <125000>;
4797					hysteresis = <1000>;
4798					type = "passive";
4799				};
4800
4801				thermal-hal-config {
4802					temperature = <125000>;
4803					hysteresis = <1000>;
4804					type = "passive";
4805				};
4806
4807				reset-mon-config {
4808					temperature = <115000>;
4809					hysteresis = <5000>;
4810					type = "passive";
4811				};
4812
4813				cdsp3_junction_config: junction-config {
4814					temperature = <95000>;
4815					hysteresis = <5000>;
4816					type = "passive";
4817				};
4818			};
4819		};
4820
4821		video-thermal {
4822			polling-delay-passive = <0>;
4823			polling-delay = <0>;
4824			thermal-sensors = <&tsens1 8>;
4825
4826			trips {
4827				thermal-engine-config {
4828					temperature = <125000>;
4829					hysteresis = <1000>;
4830					type = "passive";
4831				};
4832
4833				reset-mon-config {
4834					temperature = <115000>;
4835					hysteresis = <5000>;
4836					type = "passive";
4837				};
4838			};
4839		};
4840
4841		mem-thermal {
4842			polling-delay-passive = <10>;
4843			polling-delay = <0>;
4844			thermal-sensors = <&tsens1 9>;
4845
4846			trips {
4847				thermal-engine-config {
4848					temperature = <125000>;
4849					hysteresis = <1000>;
4850					type = "passive";
4851				};
4852
4853				ddr_config0: ddr0-config {
4854					temperature = <90000>;
4855					hysteresis = <5000>;
4856					type = "passive";
4857				};
4858
4859				reset-mon-config {
4860					temperature = <115000>;
4861					hysteresis = <5000>;
4862					type = "passive";
4863				};
4864			};
4865		};
4866
4867		modem0-thermal {
4868			polling-delay-passive = <0>;
4869			polling-delay = <0>;
4870			thermal-sensors = <&tsens1 10>;
4871
4872			trips {
4873				thermal-engine-config {
4874					temperature = <125000>;
4875					hysteresis = <1000>;
4876					type = "passive";
4877				};
4878
4879				mdmss0_config0: mdmss0-config0 {
4880					temperature = <102000>;
4881					hysteresis = <3000>;
4882					type = "passive";
4883				};
4884
4885				mdmss0_config1: mdmss0-config1 {
4886					temperature = <105000>;
4887					hysteresis = <3000>;
4888					type = "passive";
4889				};
4890
4891				reset-mon-config {
4892					temperature = <115000>;
4893					hysteresis = <5000>;
4894					type = "passive";
4895				};
4896			};
4897		};
4898
4899		modem1-thermal {
4900			polling-delay-passive = <0>;
4901			polling-delay = <0>;
4902			thermal-sensors = <&tsens1 11>;
4903
4904			trips {
4905				thermal-engine-config {
4906					temperature = <125000>;
4907					hysteresis = <1000>;
4908					type = "passive";
4909				};
4910
4911				mdmss1_config0: mdmss1-config0 {
4912					temperature = <102000>;
4913					hysteresis = <3000>;
4914					type = "passive";
4915				};
4916
4917				mdmss1_config1: mdmss1-config1 {
4918					temperature = <105000>;
4919					hysteresis = <3000>;
4920					type = "passive";
4921				};
4922
4923				reset-mon-config {
4924					temperature = <115000>;
4925					hysteresis = <5000>;
4926					type = "passive";
4927				};
4928			};
4929		};
4930
4931		modem2-thermal {
4932			polling-delay-passive = <0>;
4933			polling-delay = <0>;
4934			thermal-sensors = <&tsens1 12>;
4935
4936			trips {
4937				thermal-engine-config {
4938					temperature = <125000>;
4939					hysteresis = <1000>;
4940					type = "passive";
4941				};
4942
4943				mdmss2_config0: mdmss2-config0 {
4944					temperature = <102000>;
4945					hysteresis = <3000>;
4946					type = "passive";
4947				};
4948
4949				mdmss2_config1: mdmss2-config1 {
4950					temperature = <105000>;
4951					hysteresis = <3000>;
4952					type = "passive";
4953				};
4954
4955				reset-mon-config {
4956					temperature = <115000>;
4957					hysteresis = <5000>;
4958					type = "passive";
4959				};
4960			};
4961		};
4962
4963		modem3-thermal {
4964			polling-delay-passive = <0>;
4965			polling-delay = <0>;
4966			thermal-sensors = <&tsens1 13>;
4967
4968			trips {
4969				thermal-engine-config {
4970					temperature = <125000>;
4971					hysteresis = <1000>;
4972					type = "passive";
4973				};
4974
4975				mdmss3_config0: mdmss3-config0 {
4976					temperature = <102000>;
4977					hysteresis = <3000>;
4978					type = "passive";
4979				};
4980
4981				mdmss3_config1: mdmss3-config1 {
4982					temperature = <105000>;
4983					hysteresis = <3000>;
4984					type = "passive";
4985				};
4986
4987				reset-mon-config {
4988					temperature = <115000>;
4989					hysteresis = <5000>;
4990					type = "passive";
4991				};
4992			};
4993		};
4994
4995		camera0-thermal {
4996			polling-delay-passive = <0>;
4997			polling-delay = <0>;
4998			thermal-sensors = <&tsens1 14>;
4999
5000			trips {
5001				thermal-engine-config {
5002					temperature = <125000>;
5003					hysteresis = <1000>;
5004					type = "passive";
5005				};
5006
5007				reset-mon-config {
5008					temperature = <115000>;
5009					hysteresis = <5000>;
5010					type = "passive";
5011				};
5012			};
5013		};
5014
5015		camera1-thermal {
5016			polling-delay-passive = <0>;
5017			polling-delay = <0>;
5018			thermal-sensors = <&tsens1 15>;
5019
5020			trips {
5021				thermal-engine-config {
5022					temperature = <125000>;
5023					hysteresis = <1000>;
5024					type = "passive";
5025				};
5026
5027				reset-mon-config {
5028					temperature = <115000>;
5029					hysteresis = <5000>;
5030					type = "passive";
5031				};
5032			};
5033		};
5034
5035		aoss2-thermal {
5036			polling-delay-passive = <0>;
5037			polling-delay = <0>;
5038			thermal-sensors = <&tsens2 0>;
5039
5040			trips {
5041				thermal-engine-config {
5042					temperature = <125000>;
5043					hysteresis = <1000>;
5044					type = "passive";
5045				};
5046
5047				reset-mon-config {
5048					temperature = <115000>;
5049					hysteresis = <5000>;
5050					type = "passive";
5051				};
5052			};
5053		};
5054
5055		gpuss-0-thermal {
5056			polling-delay-passive = <10>;
5057			polling-delay = <0>;
5058			thermal-sensors = <&tsens2 1>;
5059
5060			trips {
5061				thermal-engine-config {
5062					temperature = <125000>;
5063					hysteresis = <1000>;
5064					type = "passive";
5065				};
5066
5067				thermal-hal-config {
5068					temperature = <125000>;
5069					hysteresis = <1000>;
5070					type = "passive";
5071				};
5072
5073				reset-mon-config {
5074					temperature = <115000>;
5075					hysteresis = <5000>;
5076					type = "passive";
5077				};
5078
5079				gpu0_junction_config: junction-config {
5080					temperature = <95000>;
5081					hysteresis = <5000>;
5082					type = "passive";
5083				};
5084			};
5085		};
5086
5087		gpuss-1-thermal {
5088			polling-delay-passive = <10>;
5089			polling-delay = <0>;
5090			thermal-sensors = <&tsens2 2>;
5091
5092			trips {
5093				thermal-engine-config {
5094					temperature = <125000>;
5095					hysteresis = <1000>;
5096					type = "passive";
5097				};
5098
5099				thermal-hal-config {
5100					temperature = <125000>;
5101					hysteresis = <1000>;
5102					type = "passive";
5103				};
5104
5105				reset-mon-config {
5106					temperature = <115000>;
5107					hysteresis = <5000>;
5108					type = "passive";
5109				};
5110
5111				gpu1_junction_config: junction-config {
5112					temperature = <95000>;
5113					hysteresis = <5000>;
5114					type = "passive";
5115				};
5116			};
5117		};
5118
5119		gpuss-2-thermal {
5120			polling-delay-passive = <10>;
5121			polling-delay = <0>;
5122			thermal-sensors = <&tsens2 3>;
5123
5124			trips {
5125				thermal-engine-config {
5126					temperature = <125000>;
5127					hysteresis = <1000>;
5128					type = "passive";
5129				};
5130
5131				thermal-hal-config {
5132					temperature = <125000>;
5133					hysteresis = <1000>;
5134					type = "passive";
5135				};
5136
5137				reset-mon-config {
5138					temperature = <115000>;
5139					hysteresis = <5000>;
5140					type = "passive";
5141				};
5142
5143				gpu2_junction_config: junction-config {
5144					temperature = <95000>;
5145					hysteresis = <5000>;
5146					type = "passive";
5147				};
5148			};
5149		};
5150
5151		gpuss-3-thermal {
5152			polling-delay-passive = <10>;
5153			polling-delay = <0>;
5154			thermal-sensors = <&tsens2 4>;
5155
5156			trips {
5157				thermal-engine-config {
5158					temperature = <125000>;
5159					hysteresis = <1000>;
5160					type = "passive";
5161				};
5162
5163				thermal-hal-config {
5164					temperature = <125000>;
5165					hysteresis = <1000>;
5166					type = "passive";
5167				};
5168
5169				reset-mon-config {
5170					temperature = <115000>;
5171					hysteresis = <5000>;
5172					type = "passive";
5173				};
5174
5175				gpu3_junction_config: junction-config {
5176					temperature = <95000>;
5177					hysteresis = <5000>;
5178					type = "passive";
5179				};
5180			};
5181		};
5182
5183		gpuss-4-thermal {
5184			polling-delay-passive = <10>;
5185			polling-delay = <0>;
5186			thermal-sensors = <&tsens2 5>;
5187
5188			trips {
5189				thermal-engine-config {
5190					temperature = <125000>;
5191					hysteresis = <1000>;
5192					type = "passive";
5193				};
5194
5195				thermal-hal-config {
5196					temperature = <125000>;
5197					hysteresis = <1000>;
5198					type = "passive";
5199				};
5200
5201				reset-mon-config {
5202					temperature = <115000>;
5203					hysteresis = <5000>;
5204					type = "passive";
5205				};
5206
5207				gpu4_junction_config: junction-config {
5208					temperature = <95000>;
5209					hysteresis = <5000>;
5210					type = "passive";
5211				};
5212			};
5213		};
5214
5215		gpuss-5-thermal {
5216			polling-delay-passive = <10>;
5217			polling-delay = <0>;
5218			thermal-sensors = <&tsens2 6>;
5219
5220			trips {
5221				thermal-engine-config {
5222					temperature = <125000>;
5223					hysteresis = <1000>;
5224					type = "passive";
5225				};
5226
5227				thermal-hal-config {
5228					temperature = <125000>;
5229					hysteresis = <1000>;
5230					type = "passive";
5231				};
5232
5233				reset-mon-config {
5234					temperature = <115000>;
5235					hysteresis = <5000>;
5236					type = "passive";
5237				};
5238
5239				gpu5_junction_config: junction-config {
5240					temperature = <95000>;
5241					hysteresis = <5000>;
5242					type = "passive";
5243				};
5244			};
5245		};
5246
5247		gpuss-6-thermal {
5248			polling-delay-passive = <10>;
5249			polling-delay = <0>;
5250			thermal-sensors = <&tsens2 7>;
5251
5252			trips {
5253				thermal-engine-config {
5254					temperature = <125000>;
5255					hysteresis = <1000>;
5256					type = "passive";
5257				};
5258
5259				thermal-hal-config {
5260					temperature = <125000>;
5261					hysteresis = <1000>;
5262					type = "passive";
5263				};
5264
5265				reset-mon-config {
5266					temperature = <115000>;
5267					hysteresis = <5000>;
5268					type = "passive";
5269				};
5270
5271				gpu6_junction_config: junction-config {
5272					temperature = <95000>;
5273					hysteresis = <5000>;
5274					type = "passive";
5275				};
5276			};
5277		};
5278
5279		gpuss-7-thermal {
5280			polling-delay-passive = <10>;
5281			polling-delay = <0>;
5282			thermal-sensors = <&tsens2 8>;
5283
5284			trips {
5285				thermal-engine-config {
5286					temperature = <125000>;
5287					hysteresis = <1000>;
5288					type = "passive";
5289				};
5290
5291				thermal-hal-config {
5292					temperature = <125000>;
5293					hysteresis = <1000>;
5294					type = "passive";
5295				};
5296
5297				reset-mon-config {
5298					temperature = <115000>;
5299					hysteresis = <5000>;
5300					type = "passive";
5301				};
5302
5303				gpu7_junction_config: junction-config {
5304					temperature = <95000>;
5305					hysteresis = <5000>;
5306					type = "passive";
5307				};
5308			};
5309		};
5310	};
5311
5312	timer {
5313		compatible = "arm,armv8-timer";
5314		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5315			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5316			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5317			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5318	};
5319};
5320