1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2023 Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8550.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#include "pm8550ve.dtsi" 15#include "pm8550vs.dtsi" 16#include "pmk8550.dtsi" 17#include "pmr735d.dtsi" 18 19/ { 20 model = "Qualcomm Technologies, Inc. SM8550 QRD"; 21 compatible = "qcom,sm8550-qrd", "qcom,sm8550"; 22 chassis-type = "handset"; 23 24 aliases { 25 serial0 = &uart7; 26 }; 27 28 wcd938x: audio-codec { 29 compatible = "qcom,wcd9385-codec"; 30 31 pinctrl-names = "default"; 32 pinctrl-0 = <&wcd_default>; 33 34 qcom,micbias1-microvolt = <1800000>; 35 qcom,micbias2-microvolt = <1800000>; 36 qcom,micbias3-microvolt = <1800000>; 37 qcom,micbias4-microvolt = <1800000>; 38 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 39 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 40 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 41 qcom,rx-device = <&wcd_rx>; 42 qcom,tx-device = <&wcd_tx>; 43 44 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; 45 46 vdd-buck-supply = <&vreg_l15b_1p8>; 47 vdd-rxtx-supply = <&vreg_l15b_1p8>; 48 vdd-io-supply = <&vreg_l15b_1p8>; 49 vdd-mic-bias-supply = <&vreg_bob1>; 50 51 #sound-dai-cells = <1>; 52 }; 53 54 chosen { 55 stdout-path = "serial0:115200n8"; 56 }; 57 58 gpio-keys { 59 compatible = "gpio-keys"; 60 61 pinctrl-0 = <&volume_up_n>; 62 pinctrl-names = "default"; 63 64 key-volume-up { 65 label = "Volume Up"; 66 linux,code = <KEY_VOLUMEUP>; 67 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 68 debounce-interval = <15>; 69 linux,can-disable; 70 wakeup-source; 71 }; 72 }; 73 74 pmic-glink { 75 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; 76 #address-cells = <1>; 77 #size-cells = <0>; 78 79 connector@0 { 80 compatible = "usb-c-connector"; 81 reg = <0>; 82 power-role = "dual"; 83 data-role = "dual"; 84 85 ports { 86 #address-cells = <1>; 87 #size-cells = <0>; 88 89 port@0 { 90 reg = <0>; 91 92 pmic_glink_hs_in: endpoint { 93 remote-endpoint = <&usb_1_dwc3_hs>; 94 }; 95 }; 96 97 port@1 { 98 reg = <1>; 99 100 pmic_glink_ss_in: endpoint { 101 remote-endpoint = <&redriver_ss_out>; 102 }; 103 }; 104 105 port@2 { 106 reg = <2>; 107 108 pmic_glink_sbu: endpoint { 109 remote-endpoint = <&fsa4480_sbu_mux>; 110 }; 111 }; 112 }; 113 }; 114 }; 115 116 sound { 117 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; 118 model = "SM8550-QRD"; 119 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 120 "SpkrRight IN", "WSA_SPK2 OUT", 121 "IN1_HPHL", "HPHL_OUT", 122 "IN2_HPHR", "HPHR_OUT", 123 "AMIC2", "MIC BIAS2", 124 "VA DMIC0", "MIC BIAS1", 125 "VA DMIC1", "MIC BIAS1", 126 "VA DMIC2", "MIC BIAS3", 127 "TX DMIC0", "MIC BIAS1", 128 "TX DMIC1", "MIC BIAS2", 129 "TX DMIC2", "MIC BIAS3", 130 "TX SWR_ADC1", "ADC2_OUTPUT"; 131 132 wcd-playback-dai-link { 133 link-name = "WCD Playback"; 134 135 cpu { 136 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 137 }; 138 139 codec { 140 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 141 }; 142 143 platform { 144 sound-dai = <&q6apm>; 145 }; 146 }; 147 148 wcd-capture-dai-link { 149 link-name = "WCD Capture"; 150 151 cpu { 152 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 153 }; 154 155 codec { 156 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; 157 }; 158 159 platform { 160 sound-dai = <&q6apm>; 161 }; 162 }; 163 164 wsa-dai-link { 165 link-name = "WSA Playback"; 166 167 cpu { 168 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 169 }; 170 171 codec { 172 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 173 }; 174 175 platform { 176 sound-dai = <&q6apm>; 177 }; 178 }; 179 180 va-dai-link { 181 link-name = "VA Capture"; 182 183 cpu { 184 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 185 }; 186 187 codec { 188 sound-dai = <&lpass_vamacro 0>; 189 }; 190 191 platform { 192 sound-dai = <&q6apm>; 193 }; 194 }; 195 }; 196 197 vph_pwr: vph-pwr-regulator { 198 compatible = "regulator-fixed"; 199 regulator-name = "vph_pwr"; 200 regulator-min-microvolt = <3700000>; 201 regulator-max-microvolt = <3700000>; 202 203 regulator-always-on; 204 regulator-boot-on; 205 }; 206}; 207 208&apps_rsc { 209 regulators-0 { 210 compatible = "qcom,pm8550-rpmh-regulators"; 211 qcom,pmic-id = "b"; 212 213 vdd-bob1-supply = <&vph_pwr>; 214 vdd-bob2-supply = <&vph_pwr>; 215 vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; 216 vdd-l2-l13-l14-supply = <&vreg_bob1>; 217 vdd-l3-supply = <&vreg_s4g_1p25>; 218 vdd-l5-l16-supply = <&vreg_bob1>; 219 vdd-l6-l7-supply = <&vreg_bob1>; 220 vdd-l8-l9-supply = <&vreg_bob1>; 221 vdd-l11-supply = <&vreg_s4g_1p25>; 222 vdd-l12-supply = <&vreg_s6g_1p86>; 223 vdd-l15-supply = <&vreg_s6g_1p86>; 224 vdd-l17-supply = <&vreg_bob2>; 225 226 vreg_bob1: bob1 { 227 regulator-name = "vreg_bob1"; 228 regulator-min-microvolt = <3296000>; 229 regulator-max-microvolt = <3960000>; 230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 231 }; 232 233 vreg_bob2: bob2 { 234 regulator-name = "vreg_bob2"; 235 regulator-min-microvolt = <2720000>; 236 regulator-max-microvolt = <3960000>; 237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 238 }; 239 240 vreg_l1b_1p8: ldo1 { 241 regulator-name = "vreg_l1b_1p8"; 242 regulator-min-microvolt = <1800000>; 243 regulator-max-microvolt = <1800000>; 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 245 }; 246 247 vreg_l2b_3p0: ldo2 { 248 regulator-name = "vreg_l2b_3p0"; 249 regulator-min-microvolt = <3008000>; 250 regulator-max-microvolt = <3008000>; 251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 252 }; 253 254 vreg_l5b_3p1: ldo5 { 255 regulator-name = "vreg_l5b_3p1"; 256 regulator-min-microvolt = <3104000>; 257 regulator-max-microvolt = <3104000>; 258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 259 }; 260 261 vreg_l6b_1p8: ldo6 { 262 regulator-name = "vreg_l6b_1p8"; 263 regulator-min-microvolt = <1800000>; 264 regulator-max-microvolt = <3008000>; 265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 266 }; 267 268 vreg_l7b_1p8: ldo7 { 269 regulator-name = "vreg_l7b_1p8"; 270 regulator-min-microvolt = <1800000>; 271 regulator-max-microvolt = <3008000>; 272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 273 }; 274 275 vreg_l8b_1p8: ldo8 { 276 regulator-name = "vreg_l8b_1p8"; 277 regulator-min-microvolt = <1800000>; 278 regulator-max-microvolt = <3008000>; 279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 280 }; 281 282 vreg_l9b_2p9: ldo9 { 283 regulator-name = "vreg_l9b_2p9"; 284 regulator-min-microvolt = <2960000>; 285 regulator-max-microvolt = <3008000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_l11b_1p2: ldo11 { 290 regulator-name = "vreg_l11b_1p2"; 291 regulator-min-microvolt = <1200000>; 292 regulator-max-microvolt = <1504000>; 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 294 }; 295 296 vreg_l12b_1p8: ldo12 { 297 regulator-name = "vreg_l12b_1p8"; 298 regulator-min-microvolt = <1800000>; 299 regulator-max-microvolt = <1800000>; 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 301 }; 302 303 vreg_l13b_3p0: ldo13 { 304 regulator-name = "vreg_l13b_3p0"; 305 regulator-min-microvolt = <3000000>; 306 regulator-max-microvolt = <3000000>; 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 308 }; 309 310 vreg_l14b_3p2: ldo14 { 311 regulator-name = "vreg_l14b_3p2"; 312 regulator-min-microvolt = <3200000>; 313 regulator-max-microvolt = <3200000>; 314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 315 }; 316 317 vreg_l15b_1p8: ldo15 { 318 regulator-name = "vreg_l15b_1p8"; 319 regulator-min-microvolt = <1800000>; 320 regulator-max-microvolt = <1800000>; 321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 322 }; 323 324 vreg_l16b_2p8: ldo16 { 325 regulator-name = "vreg_l16b_2p8"; 326 regulator-min-microvolt = <2800000>; 327 regulator-max-microvolt = <2800000>; 328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 329 }; 330 331 vreg_l17b_2p5: ldo17 { 332 regulator-name = "vreg_l17b_2p5"; 333 regulator-min-microvolt = <2504000>; 334 regulator-max-microvolt = <2504000>; 335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 336 }; 337 }; 338 339 regulators-1 { 340 compatible = "qcom,pm8550vs-rpmh-regulators"; 341 qcom,pmic-id = "c"; 342 343 vdd-l1-supply = <&vreg_s4g_1p25>; 344 vdd-l2-supply = <&vreg_s4e_0p95>; 345 vdd-l3-supply = <&vreg_s4e_0p95>; 346 347 vreg_l3c_0p9: ldo3 { 348 regulator-name = "vreg_l3c_0p9"; 349 regulator-min-microvolt = <880000>; 350 regulator-max-microvolt = <912000>; 351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 352 }; 353 }; 354 355 regulators-2 { 356 compatible = "qcom,pm8550vs-rpmh-regulators"; 357 qcom,pmic-id = "d"; 358 359 vdd-l1-supply = <&vreg_s4e_0p95>; 360 vdd-l2-supply = <&vreg_s4e_0p95>; 361 vdd-l3-supply = <&vreg_s4e_0p95>; 362 363 vreg_l1d_0p88: ldo1 { 364 regulator-name = "vreg_l1d_0p88"; 365 regulator-min-microvolt = <880000>; 366 regulator-max-microvolt = <920000>; 367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 368 }; 369 370 /* ldo2 supplies SM8550 VDD_LPI_MX */ 371 }; 372 373 regulators-3 { 374 compatible = "qcom,pm8550vs-rpmh-regulators"; 375 qcom,pmic-id = "e"; 376 377 vdd-l1-supply = <&vreg_s4e_0p95>; 378 vdd-l2-supply = <&vreg_s4e_0p95>; 379 vdd-l3-supply = <&vreg_s4g_1p25>; 380 vdd-s4-supply = <&vph_pwr>; 381 vdd-s5-supply = <&vph_pwr>; 382 383 vreg_s4e_0p95: smps4 { 384 regulator-name = "vreg_s4e_0p95"; 385 regulator-min-microvolt = <904000>; 386 regulator-max-microvolt = <984000>; 387 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 388 }; 389 390 vreg_s5e_1p08: smps5 { 391 regulator-name = "vreg_s5e_1p08"; 392 regulator-min-microvolt = <1080000>; 393 regulator-max-microvolt = <1120000>; 394 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 395 }; 396 397 vreg_l1e_0p88: ldo1 { 398 regulator-name = "vreg_l1e_0p88"; 399 regulator-min-microvolt = <880000>; 400 regulator-max-microvolt = <880000>; 401 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 402 }; 403 404 vreg_l2e_0p9: ldo2 { 405 regulator-name = "vreg_l2e_0p9"; 406 regulator-min-microvolt = <904000>; 407 regulator-max-microvolt = <970000>; 408 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 409 }; 410 411 vreg_l3e_1p2: ldo3 { 412 regulator-name = "vreg_l3e_1p2"; 413 regulator-min-microvolt = <1200000>; 414 regulator-max-microvolt = <1200000>; 415 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 416 }; 417 }; 418 419 regulators-4 { 420 compatible = "qcom,pm8550ve-rpmh-regulators"; 421 qcom,pmic-id = "f"; 422 423 vdd-l1-supply = <&vreg_s4e_0p95>; 424 vdd-l2-supply = <&vreg_s4e_0p95>; 425 vdd-l3-supply = <&vreg_s4e_0p95>; 426 vdd-s4-supply = <&vph_pwr>; 427 428 vreg_s4f_0p5: smps4 { 429 regulator-name = "vreg_s4f_0p5"; 430 regulator-min-microvolt = <500000>; 431 regulator-max-microvolt = <700000>; 432 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 433 }; 434 435 vreg_l1f_0p9: ldo1 { 436 regulator-name = "vreg_l1f_0p9"; 437 regulator-min-microvolt = <912000>; 438 regulator-max-microvolt = <912000>; 439 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 440 }; 441 442 vreg_l2f_0p88: ldo2 { 443 regulator-name = "vreg_l2f_0p88"; 444 regulator-min-microvolt = <880000>; 445 regulator-max-microvolt = <912000>; 446 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 447 }; 448 449 vreg_l3f_0p88: ldo3 { 450 regulator-name = "vreg_l3f_0p88"; 451 regulator-min-microvolt = <880000>; 452 regulator-max-microvolt = <912000>; 453 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 454 }; 455 }; 456 457 regulators-5 { 458 compatible = "qcom,pm8550vs-rpmh-regulators"; 459 qcom,pmic-id = "g"; 460 461 vdd-l1-supply = <&vreg_s4g_1p25>; 462 vdd-l2-supply = <&vreg_s4g_1p25>; 463 vdd-l3-supply = <&vreg_s4g_1p25>; 464 vdd-s1-supply = <&vph_pwr>; 465 vdd-s2-supply = <&vph_pwr>; 466 vdd-s3-supply = <&vph_pwr>; 467 vdd-s4-supply = <&vph_pwr>; 468 vdd-s5-supply = <&vph_pwr>; 469 vdd-s6-supply = <&vph_pwr>; 470 471 vreg_s1g_1p25: smps1 { 472 regulator-name = "vreg_s1g_1p25"; 473 regulator-min-microvolt = <1200000>; 474 regulator-max-microvolt = <1300000>; 475 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 476 }; 477 478 vreg_s2g_0p85: smps2 { 479 regulator-name = "vreg_s2g_0p85"; 480 regulator-min-microvolt = <800000>; 481 regulator-max-microvolt = <1000000>; 482 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 483 }; 484 485 vreg_s3g_0p8: smps3 { 486 regulator-name = "vreg_s3g_0p8"; 487 regulator-min-microvolt = <300000>; 488 regulator-max-microvolt = <1004000>; 489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 490 }; 491 492 vreg_s4g_1p25: smps4 { 493 regulator-name = "vreg_s4g_1p25"; 494 regulator-min-microvolt = <1200000>; 495 regulator-max-microvolt = <1352000>; 496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 497 }; 498 499 vreg_s5g_0p85: smps5 { 500 regulator-name = "vreg_s5g_0p85"; 501 regulator-min-microvolt = <500000>; 502 regulator-max-microvolt = <1004000>; 503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 504 }; 505 506 vreg_s6g_1p86: smps6 { 507 regulator-name = "vreg_s6g_1p86"; 508 regulator-min-microvolt = <1800000>; 509 regulator-max-microvolt = <2000000>; 510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 511 }; 512 513 vreg_l1g_1p2: ldo1 { 514 regulator-name = "vreg_l1g_1p2"; 515 regulator-min-microvolt = <1200000>; 516 regulator-max-microvolt = <1200000>; 517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 518 }; 519 520 vreg_l3g_1p2: ldo3 { 521 regulator-name = "vreg_l3g_1p2"; 522 regulator-min-microvolt = <1200000>; 523 regulator-max-microvolt = <1200000>; 524 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 525 }; 526 }; 527}; 528 529&i2c_master_hub_0 { 530 status = "okay"; 531}; 532 533&i2c_hub_2 { 534 status = "okay"; 535 536 typec-retimer@1c { 537 compatible = "onnn,nb7vpq904m"; 538 reg = <0x1c>; 539 540 vcc-supply = <&vreg_l15b_1p8>; 541 542 retimer-switch; 543 orientation-switch; 544 545 ports { 546 #address-cells = <1>; 547 #size-cells = <0>; 548 549 port@0 { 550 reg = <0>; 551 552 redriver_ss_out: endpoint { 553 remote-endpoint = <&pmic_glink_ss_in>; 554 }; 555 }; 556 557 port@1 { 558 reg = <1>; 559 560 redriver_ss_in: endpoint { 561 data-lanes = <3 2 1 0>; 562 remote-endpoint = <&usb_dp_qmpphy_out>; 563 }; 564 }; 565 }; 566 }; 567 568 typec-mux@42 { 569 compatible = "fcs,fsa4480"; 570 reg = <0x42>; 571 572 vcc-supply = <&vreg_bob1>; 573 574 mode-switch; 575 orientation-switch; 576 577 port { 578 fsa4480_sbu_mux: endpoint { 579 remote-endpoint = <&pmic_glink_sbu>; 580 }; 581 }; 582 }; 583}; 584 585&gcc { 586 clocks = <&bi_tcxo_div2>, <&sleep_clk>, 587 <&pcie0_phy>, 588 <&pcie1_phy>, 589 <0>, 590 <&ufs_mem_phy 0>, 591 <&ufs_mem_phy 1>, 592 <&ufs_mem_phy 2>, 593 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; 594}; 595 596&lpass_tlmm { 597 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 598 pins = "gpio17"; 599 function = "gpio"; 600 drive-strength = <16>; 601 bias-disable; 602 output-low; 603 }; 604 605 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 606 pins = "gpio18"; 607 function = "gpio"; 608 drive-strength = <16>; 609 bias-disable; 610 output-low; 611 }; 612}; 613 614&mdss { 615 status = "okay"; 616}; 617 618&mdss_dsi0 { 619 vdda-supply = <&vreg_l3e_1p2>; 620 status = "okay"; 621 622 panel@0 { 623 compatible = "visionox,vtdr6130"; 624 reg = <0>; 625 626 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; 627 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; 628 pinctrl-names = "default", "sleep"; 629 630 vci-supply = <&vreg_l13b_3p0>; 631 vdd-supply = <&vreg_l11b_1p2>; 632 vddio-supply = <&vreg_l12b_1p8>; 633 634 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 635 636 port { 637 panel0_in: endpoint { 638 remote-endpoint = <&mdss_dsi0_out>; 639 }; 640 }; 641 }; 642}; 643 644&mdss_dsi0_out { 645 remote-endpoint = <&panel0_in>; 646 data-lanes = <0 1 2 3>; 647}; 648 649&mdss_dsi0_phy { 650 vdds-supply = <&vreg_l1e_0p88>; 651 status = "okay"; 652}; 653 654&mdss_dp0 { 655 status = "okay"; 656}; 657 658&mdss_dp0_out { 659 data-lanes = <0 1>; 660 remote-endpoint = <&usb_dp_qmpphy_dp_in>; 661}; 662 663&pcie_1_phy_aux_clk { 664 status = "disabled"; 665}; 666 667&pcie0 { 668 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 669 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 670 671 pinctrl-0 = <&pcie0_default_state>; 672 pinctrl-names = "default"; 673 674 status = "okay"; 675}; 676 677&pcie0_phy { 678 vdda-phy-supply = <&vreg_l1e_0p88>; 679 vdda-pll-supply = <&vreg_l3e_1p2>; 680 681 status = "okay"; 682}; 683 684&pm8550_flash { 685 status = "okay"; 686 687 led-0 { 688 function = LED_FUNCTION_FLASH; 689 color = <LED_COLOR_ID_YELLOW>; 690 led-sources = <1>, <4>; 691 led-max-microamp = <500000>; 692 flash-max-microamp = <2000000>; 693 flash-max-timeout-us = <1280000>; 694 function-enumerator = <0>; 695 }; 696 697 led-1 { 698 function = LED_FUNCTION_FLASH; 699 color = <LED_COLOR_ID_WHITE>; 700 led-sources = <2>, <3>; 701 led-max-microamp = <500000>; 702 flash-max-microamp = <2000000>; 703 flash-max-timeout-us = <1280000>; 704 function-enumerator = <1>; 705 }; 706}; 707 708&pm8550_gpios { 709 volume_up_n: volume-up-n-state { 710 pins = "gpio6"; 711 function = "normal"; 712 power-source = <1>; 713 bias-pull-up; 714 input-enable; 715 }; 716}; 717 718&pm8550_pwm { 719 status = "okay"; 720 721 multi-led { 722 color = <LED_COLOR_ID_RGB>; 723 function = LED_FUNCTION_STATUS; 724 725 #address-cells = <1>; 726 #size-cells = <0>; 727 728 led@1 { 729 reg = <1>; 730 color = <LED_COLOR_ID_RED>; 731 }; 732 733 led@2 { 734 reg = <2>; 735 color = <LED_COLOR_ID_GREEN>; 736 }; 737 738 led@3 { 739 reg = <3>; 740 color = <LED_COLOR_ID_BLUE>; 741 }; 742 }; 743}; 744 745&pm8550b_eusb2_repeater { 746 vdd18-supply = <&vreg_l15b_1p8>; 747 vdd3-supply = <&vreg_l5b_3p1>; 748}; 749 750&pon_pwrkey { 751 status = "okay"; 752}; 753 754&pon_resin { 755 linux,code = <KEY_VOLUMEDOWN>; 756 757 status = "okay"; 758}; 759 760&pcie_1_phy_aux_clk { 761 clock-frequency = <1000>; 762}; 763 764&qupv3_id_0 { 765 status = "okay"; 766}; 767 768&remoteproc_adsp { 769 firmware-name = "qcom/sm8550/adsp.mbn", 770 "qcom/sm8550/adsp_dtb.mbn"; 771 status = "okay"; 772}; 773 774&remoteproc_cdsp { 775 firmware-name = "qcom/sm8550/cdsp.mbn", 776 "qcom/sm8550/cdsp_dtb.mbn"; 777 status = "okay"; 778}; 779 780&remoteproc_mpss { 781 firmware-name = "qcom/sm8550/modem.mbn", 782 "qcom/sm8550/modem_dtb.mbn"; 783 status = "okay"; 784}; 785 786&sleep_clk { 787 clock-frequency = <32000>; 788}; 789 790&swr0 { 791 status = "okay"; 792 793 /* WSA8845, Speaker North */ 794 north_spkr: speaker@0,0 { 795 compatible = "sdw20217020400"; 796 reg = <0 0>; 797 pinctrl-names = "default"; 798 pinctrl-0 = <&spkr_1_sd_n_active>; 799 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; 800 #sound-dai-cells = <0>; 801 sound-name-prefix = "SpkrLeft"; 802 vdd-1p8-supply = <&vreg_l15b_1p8>; 803 vdd-io-supply = <&vreg_l3g_1p2>; 804 }; 805 806 /* WSA8845, Speaker South */ 807 south_spkr: speaker@0,1 { 808 compatible = "sdw20217020400"; 809 reg = <0 1>; 810 pinctrl-names = "default"; 811 pinctrl-0 = <&spkr_2_sd_n_active>; 812 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; 813 #sound-dai-cells = <0>; 814 sound-name-prefix = "SpkrRight"; 815 vdd-1p8-supply = <&vreg_l15b_1p8>; 816 vdd-io-supply = <&vreg_l3g_1p2>; 817 }; 818}; 819 820&swr1 { 821 status = "okay"; 822 823 /* WCD9385 RX */ 824 wcd_rx: codec@0,4 { 825 compatible = "sdw20217010d00"; 826 reg = <0 4>; 827 qcom,rx-port-mapping = <1 2 3 4 5>; 828 }; 829}; 830 831&swr2 { 832 status = "okay"; 833 834 /* WCD9385 TX */ 835 wcd_tx: codec@0,3 { 836 compatible = "sdw20217010d00"; 837 reg = <0 3>; 838 qcom,tx-port-mapping = <1 1 2 3>; 839 }; 840}; 841 842&tlmm { 843 gpio-reserved-ranges = <32 8>; 844 845 sde_dsi_active: sde-dsi-active-state { 846 pins = "gpio133"; 847 function = "gpio"; 848 drive-strength = <8>; 849 bias-disable; 850 }; 851 852 sde_dsi_suspend: sde-dsi-suspend-state { 853 pins = "gpio133"; 854 function = "gpio"; 855 drive-strength = <2>; 856 bias-pull-down; 857 }; 858 859 sde_te_active: sde-te-active-state { 860 pins = "gpio86"; 861 function = "mdp_vsync"; 862 drive-strength = <2>; 863 bias-pull-down; 864 }; 865 866 sde_te_suspend: sde-te-suspend-state { 867 pins = "gpio86"; 868 function = "mdp_vsync"; 869 drive-strength = <2>; 870 bias-pull-down; 871 }; 872 873 wcd_default: wcd-reset-n-active-state { 874 pins = "gpio108"; 875 function = "gpio"; 876 drive-strength = <16>; 877 bias-disable; 878 output-low; 879 }; 880}; 881 882&uart7 { 883 status = "okay"; 884}; 885 886&ufs_mem_hc { 887 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 888 vcc-supply = <&vreg_l17b_2p5>; 889 vcc-max-microamp = <1300000>; 890 vccq-supply = <&vreg_l1g_1p2>; 891 vccq-max-microamp = <1200000>; 892 vccq2-supply = <&vreg_l3g_1p2>; 893 vccq2-max-microamp = <100>; 894 895 status = "okay"; 896}; 897 898&ufs_mem_phy { 899 vdda-phy-supply = <&vreg_l1d_0p88>; 900 vdda-pll-supply = <&vreg_l3e_1p2>; 901 902 status = "okay"; 903}; 904 905&usb_1 { 906 status = "okay"; 907}; 908 909&usb_1_dwc3 { 910 dr_mode = "otg"; 911 usb-role-switch; 912}; 913 914&usb_1_dwc3_hs { 915 remote-endpoint = <&pmic_glink_hs_in>; 916}; 917 918&usb_1_dwc3_ss { 919 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; 920}; 921 922&usb_1_hsphy { 923 vdd-supply = <&vreg_l1e_0p88>; 924 vdda12-supply = <&vreg_l3e_1p2>; 925 926 phys = <&pm8550b_eusb2_repeater>; 927 928 status = "okay"; 929}; 930 931&usb_dp_qmpphy { 932 vdda-phy-supply = <&vreg_l3e_1p2>; 933 vdda-pll-supply = <&vreg_l3f_0p88>; 934 935 orientation-switch; 936 937 status = "okay"; 938}; 939 940&usb_dp_qmpphy_dp_in { 941 remote-endpoint = <&mdss_dp0_out>; 942}; 943 944&usb_dp_qmpphy_out { 945 remote-endpoint = <&redriver_ss_in>; 946}; 947 948&usb_dp_qmpphy_usb_ss_in { 949 remote-endpoint = <&usb_1_dwc3_ss>; 950}; 951 952&xo_board { 953 clock-frequency = <76800000>; 954}; 955