1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include "sm8550.dtsi" 10#include "pm8010.dtsi" 11#include "pm8550.dtsi" 12#include "pm8550b.dtsi" 13#include "pm8550ve.dtsi" 14#include "pm8550vs.dtsi" 15#include "pmk8550.dtsi" 16#include "pmr735d.dtsi" 17 18/ { 19 model = "Qualcomm Technologies, Inc. SM8550 MTP"; 20 compatible = "qcom,sm8550-mtp", "qcom,sm8550"; 21 chassis-type = "handset"; 22 23 aliases { 24 serial0 = &uart7; 25 }; 26 27 wcd938x: audio-codec { 28 compatible = "qcom,wcd9385-codec"; 29 30 pinctrl-names = "default"; 31 pinctrl-0 = <&wcd_default>; 32 33 qcom,micbias1-microvolt = <1800000>; 34 qcom,micbias2-microvolt = <1800000>; 35 qcom,micbias3-microvolt = <1800000>; 36 qcom,micbias4-microvolt = <1800000>; 37 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 38 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 39 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 40 qcom,rx-device = <&wcd_rx>; 41 qcom,tx-device = <&wcd_tx>; 42 43 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; 44 45 vdd-buck-supply = <&vreg_l15b_1p8>; 46 vdd-rxtx-supply = <&vreg_l15b_1p8>; 47 vdd-io-supply = <&vreg_l15b_1p8>; 48 vdd-mic-bias-supply = <&vreg_bob1>; 49 50 #sound-dai-cells = <1>; 51 }; 52 53 chosen { 54 stdout-path = "serial0:115200n8"; 55 }; 56 57 pmic-glink { 58 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; 59 #address-cells = <1>; 60 #size-cells = <0>; 61 62 connector@0 { 63 compatible = "usb-c-connector"; 64 reg = <0>; 65 power-role = "dual"; 66 data-role = "dual"; 67 68 ports { 69 #address-cells = <1>; 70 #size-cells = <0>; 71 72 port@0 { 73 reg = <0>; 74 75 pmic_glink_hs_in: endpoint { 76 remote-endpoint = <&usb_1_dwc3_hs>; 77 }; 78 }; 79 80 port@1 { 81 reg = <1>; 82 83 pmic_glink_ss_in: endpoint { 84 remote-endpoint = <&usb_dp_qmpphy_out>; 85 }; 86 }; 87 88 port@2 { 89 reg = <2>; 90 91 pmic_glink_sbu: endpoint { 92 remote-endpoint = <&fsa4480_sbu_mux>; 93 }; 94 }; 95 }; 96 }; 97 }; 98 99 sound { 100 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; 101 model = "SM8550-MTP"; 102 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 103 "SpkrRight IN", "WSA_SPK2 OUT", 104 "IN1_HPHL", "HPHL_OUT", 105 "IN2_HPHR", "HPHR_OUT", 106 "AMIC2", "MIC BIAS2", 107 "VA DMIC0", "MIC BIAS1", 108 "VA DMIC1", "MIC BIAS1", 109 "VA DMIC2", "MIC BIAS3", 110 "TX DMIC0", "MIC BIAS1", 111 "TX DMIC1", "MIC BIAS2", 112 "TX DMIC2", "MIC BIAS3", 113 "TX SWR_ADC1", "ADC2_OUTPUT"; 114 115 wcd-playback-dai-link { 116 link-name = "WCD Playback"; 117 118 cpu { 119 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 120 }; 121 122 codec { 123 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 124 }; 125 126 platform { 127 sound-dai = <&q6apm>; 128 }; 129 }; 130 131 wcd-capture-dai-link { 132 link-name = "WCD Capture"; 133 134 cpu { 135 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 136 }; 137 138 codec { 139 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; 140 }; 141 142 platform { 143 sound-dai = <&q6apm>; 144 }; 145 }; 146 147 wsa-dai-link { 148 link-name = "WSA Playback"; 149 150 cpu { 151 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 152 }; 153 154 codec { 155 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 156 }; 157 158 platform { 159 sound-dai = <&q6apm>; 160 }; 161 }; 162 163 va-dai-link { 164 link-name = "VA Capture"; 165 166 cpu { 167 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 168 }; 169 170 codec { 171 sound-dai = <&lpass_vamacro 0>; 172 }; 173 174 platform { 175 sound-dai = <&q6apm>; 176 }; 177 }; 178 }; 179 180 vph_pwr: vph-pwr-regulator { 181 compatible = "regulator-fixed"; 182 regulator-name = "vph_pwr"; 183 regulator-min-microvolt = <3700000>; 184 regulator-max-microvolt = <3700000>; 185 186 regulator-always-on; 187 regulator-boot-on; 188 }; 189}; 190 191&apps_rsc { 192 regulators-0 { 193 compatible = "qcom,pm8550-rpmh-regulators"; 194 qcom,pmic-id = "b"; 195 196 vdd-bob1-supply = <&vph_pwr>; 197 vdd-bob2-supply = <&vph_pwr>; 198 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>; 199 vdd-l2-l13-l14-supply = <&vreg_bob1>; 200 vdd-l3-supply = <&vreg_s4g_1p3>; 201 vdd-l5-l16-supply = <&vreg_bob1>; 202 vdd-l6-l7-supply = <&vreg_bob1>; 203 vdd-l8-l9-supply = <&vreg_bob1>; 204 vdd-l11-supply = <&vreg_s4g_1p3>; 205 vdd-l12-supply = <&vreg_s6g_1p8>; 206 vdd-l15-supply = <&vreg_s6g_1p8>; 207 vdd-l17-supply = <&vreg_bob2>; 208 209 vreg_bob1: bob1 { 210 regulator-name = "vreg_bob1"; 211 regulator-min-microvolt = <3296000>; 212 regulator-max-microvolt = <3960000>; 213 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 214 }; 215 216 vreg_bob2: bob2 { 217 regulator-name = "vreg_bob2"; 218 regulator-min-microvolt = <2720000>; 219 regulator-max-microvolt = <3960000>; 220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 221 }; 222 223 vreg_l1b_1p8: ldo1 { 224 regulator-name = "vreg_l1b_1p8"; 225 regulator-min-microvolt = <1800000>; 226 regulator-max-microvolt = <1800000>; 227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 228 }; 229 230 vreg_l2b_3p0: ldo2 { 231 regulator-name = "vreg_l2b_3p0"; 232 regulator-min-microvolt = <3008000>; 233 regulator-max-microvolt = <3008000>; 234 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 235 }; 236 237 vreg_l5b_3p1: ldo5 { 238 regulator-name = "vreg_l5b_3p1"; 239 regulator-min-microvolt = <3104000>; 240 regulator-max-microvolt = <3104000>; 241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 242 }; 243 244 vreg_l6b_1p8: ldo6 { 245 regulator-name = "vreg_l6b_1p8"; 246 regulator-min-microvolt = <1800000>; 247 regulator-max-microvolt = <3008000>; 248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 249 }; 250 251 vreg_l7b_1p8: ldo7 { 252 regulator-name = "vreg_l7b_1p8"; 253 regulator-min-microvolt = <1800000>; 254 regulator-max-microvolt = <3008000>; 255 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 256 }; 257 258 vreg_l8b_1p8: ldo8 { 259 regulator-name = "vreg_l8b_1p8"; 260 regulator-min-microvolt = <1800000>; 261 regulator-max-microvolt = <3008000>; 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 263 }; 264 265 vreg_l9b_2p9: ldo9 { 266 regulator-name = "vreg_l9b_2p9"; 267 regulator-min-microvolt = <2960000>; 268 regulator-max-microvolt = <3008000>; 269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 270 }; 271 272 vreg_l11b_1p2: ldo11 { 273 regulator-name = "vreg_l11b_1p2"; 274 regulator-min-microvolt = <1200000>; 275 regulator-max-microvolt = <1504000>; 276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 277 }; 278 279 vreg_l12b_1p8: ldo12 { 280 regulator-name = "vreg_l12b_1p8"; 281 regulator-min-microvolt = <1800000>; 282 regulator-max-microvolt = <1800000>; 283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 284 }; 285 286 vreg_l13b_3p0: ldo13 { 287 regulator-name = "vreg_l13b_3p0"; 288 regulator-min-microvolt = <3000000>; 289 regulator-max-microvolt = <3000000>; 290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 291 }; 292 293 vreg_l14b_3p2: ldo14 { 294 regulator-name = "vreg_l14b_3p2"; 295 regulator-min-microvolt = <3200000>; 296 regulator-max-microvolt = <3200000>; 297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 298 }; 299 300 vreg_l15b_1p8: ldo15 { 301 regulator-name = "vreg_l15b_1p8"; 302 regulator-min-microvolt = <1800000>; 303 regulator-max-microvolt = <1800000>; 304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 305 }; 306 307 vreg_l16b_2p8: ldo16 { 308 regulator-name = "vreg_l16b_2p8"; 309 regulator-min-microvolt = <2800000>; 310 regulator-max-microvolt = <2800000>; 311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 312 }; 313 314 vreg_l17b_2p5: ldo17 { 315 regulator-name = "vreg_l17b_2p5"; 316 regulator-min-microvolt = <2504000>; 317 regulator-max-microvolt = <2504000>; 318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 319 }; 320 }; 321 322 regulators-1 { 323 compatible = "qcom,pm8550vs-rpmh-regulators"; 324 qcom,pmic-id = "c"; 325 326 vdd-l3-supply = <&vreg_s4e_0p9>; 327 328 vreg_l3c_0p91: ldo3 { 329 regulator-name = "vreg_l3c_0p9"; 330 regulator-min-microvolt = <880000>; 331 regulator-max-microvolt = <912000>; 332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 333 }; 334 }; 335 336 regulators-2 { 337 compatible = "qcom,pm8550vs-rpmh-regulators"; 338 qcom,pmic-id = "d"; 339 340 vdd-l1-supply = <&vreg_s4e_0p9>; 341 342 vreg_l1d_0p88: ldo1 { 343 regulator-name = "vreg_l1d_0p88"; 344 regulator-min-microvolt = <880000>; 345 regulator-max-microvolt = <920000>; 346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 347 }; 348 }; 349 350 regulators-3 { 351 compatible = "qcom,pm8550vs-rpmh-regulators"; 352 qcom,pmic-id = "e"; 353 354 vdd-l1-supply = <&vreg_s4e_0p9>; 355 vdd-l2-supply = <&vreg_s4e_0p9>; 356 vdd-l3-supply = <&vreg_s4g_1p3>; 357 vdd-s4-supply = <&vph_pwr>; 358 vdd-s5-supply = <&vph_pwr>; 359 360 vreg_s4e_0p9: smps4 { 361 regulator-name = "vreg_s4e_0p9"; 362 regulator-min-microvolt = <904000>; 363 regulator-max-microvolt = <984000>; 364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 365 }; 366 367 vreg_s5e_1p1: smps5 { 368 regulator-name = "vreg_s5e_1p1"; 369 regulator-min-microvolt = <1080000>; 370 regulator-max-microvolt = <1120000>; 371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 372 }; 373 374 vreg_l1e_0p88: ldo1 { 375 regulator-name = "vreg_l1e_0p88"; 376 regulator-min-microvolt = <880000>; 377 regulator-max-microvolt = <880000>; 378 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 379 }; 380 381 vreg_l2e_0p9: ldo2 { 382 regulator-name = "vreg_l2e_0p9"; 383 regulator-min-microvolt = <904000>; 384 regulator-max-microvolt = <970000>; 385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 386 }; 387 388 vreg_l3e_1p2: ldo3 { 389 regulator-name = "vreg_l3e_1p2"; 390 regulator-min-microvolt = <1200000>; 391 regulator-max-microvolt = <1200000>; 392 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 393 }; 394 }; 395 396 regulators-4 { 397 compatible = "qcom,pm8550ve-rpmh-regulators"; 398 qcom,pmic-id = "f"; 399 400 vdd-l1-supply = <&vreg_s4e_0p9>; 401 vdd-l2-supply = <&vreg_s4e_0p9>; 402 vdd-l3-supply = <&vreg_s4e_0p9>; 403 vdd-s4-supply = <&vph_pwr>; 404 405 vreg_s4f_0p5: smps4 { 406 regulator-name = "vreg_s4f_0p5"; 407 regulator-min-microvolt = <500000>; 408 regulator-max-microvolt = <700000>; 409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 410 }; 411 412 vreg_l1f_0p9: ldo1 { 413 regulator-name = "vreg_l1f_0p9"; 414 regulator-min-microvolt = <912000>; 415 regulator-max-microvolt = <912000>; 416 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 417 }; 418 419 vreg_l2f_0p88: ldo2 { 420 regulator-name = "vreg_l2f_0p88"; 421 regulator-min-microvolt = <880000>; 422 regulator-max-microvolt = <912000>; 423 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 424 }; 425 426 vreg_l3f_0p91: ldo3 { 427 regulator-name = "vreg_l3f_0p91"; 428 regulator-min-microvolt = <880000>; 429 regulator-max-microvolt = <912000>; 430 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 431 }; 432 }; 433 434 regulators-5 { 435 compatible = "qcom,pm8550vs-rpmh-regulators"; 436 qcom,pmic-id = "g"; 437 438 vdd-l1-supply = <&vreg_s4g_1p3>; 439 vdd-l2-supply = <&vreg_s4g_1p3>; 440 vdd-l3-supply = <&vreg_s4g_1p3>; 441 vdd-s1-supply = <&vph_pwr>; 442 vdd-s2-supply = <&vph_pwr>; 443 vdd-s3-supply = <&vph_pwr>; 444 vdd-s4-supply = <&vph_pwr>; 445 vdd-s5-supply = <&vph_pwr>; 446 vdd-s6-supply = <&vph_pwr>; 447 448 vreg_s1g_1p2: smps1 { 449 regulator-name = "vreg_s1g_1p2"; 450 regulator-min-microvolt = <1200000>; 451 regulator-max-microvolt = <1300000>; 452 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 453 }; 454 455 vreg_s2g_0p8: smps2 { 456 regulator-name = "vreg_s2g_0p8"; 457 regulator-min-microvolt = <800000>; 458 regulator-max-microvolt = <1000000>; 459 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 460 }; 461 462 vreg_s3g_0p7: smps3 { 463 regulator-name = "vreg_s3g_0p7"; 464 regulator-min-microvolt = <300000>; 465 regulator-max-microvolt = <1004000>; 466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 467 }; 468 469 vreg_s4g_1p3: smps4 { 470 regulator-name = "vreg_s4g_1p3"; 471 regulator-min-microvolt = <1200000>; 472 regulator-max-microvolt = <1352000>; 473 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 474 }; 475 476 vreg_s5g_0p8: smps5 { 477 regulator-name = "vreg_s5g_0p8"; 478 regulator-min-microvolt = <500000>; 479 regulator-max-microvolt = <1004000>; 480 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 481 }; 482 483 vreg_s6g_1p8: smps6 { 484 regulator-name = "vreg_s6g_1p8"; 485 regulator-min-microvolt = <1800000>; 486 regulator-max-microvolt = <2000000>; 487 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 488 }; 489 490 vreg_l1g_1p2: ldo1 { 491 regulator-name = "vreg_l1g_1p2"; 492 regulator-min-microvolt = <1200000>; 493 regulator-max-microvolt = <1200000>; 494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 495 }; 496 497 vreg_l2g_1p2: ldo2 { 498 regulator-name = "vreg_l2g_1p2"; 499 regulator-min-microvolt = <1200000>; 500 regulator-max-microvolt = <1200000>; 501 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 502 }; 503 504 vreg_l3g_1p2: ldo3 { 505 regulator-name = "vreg_l3g_1p2"; 506 regulator-min-microvolt = <1200000>; 507 regulator-max-microvolt = <1200000>; 508 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 509 }; 510 }; 511}; 512 513&i2c_master_hub_0 { 514 status = "okay"; 515}; 516 517&i2c_hub_2 { 518 status = "okay"; 519 520 typec-mux@42 { 521 compatible = "fcs,fsa4480"; 522 reg = <0x42>; 523 524 vcc-supply = <&vreg_bob1>; 525 526 mode-switch; 527 orientation-switch; 528 529 port { 530 fsa4480_sbu_mux: endpoint { 531 remote-endpoint = <&pmic_glink_sbu>; 532 }; 533 }; 534 }; 535}; 536 537&lpass_tlmm { 538 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 539 pins = "gpio17"; 540 function = "gpio"; 541 drive-strength = <16>; 542 bias-disable; 543 output-low; 544 }; 545 546 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 547 pins = "gpio18"; 548 function = "gpio"; 549 drive-strength = <16>; 550 bias-disable; 551 output-low; 552 }; 553}; 554 555&mdss { 556 status = "okay"; 557}; 558 559&mdss_dsi0 { 560 vdda-supply = <&vreg_l3e_1p2>; 561 status = "okay"; 562 563 panel@0 { 564 compatible = "visionox,vtdr6130"; 565 reg = <0>; 566 567 pinctrl-names = "default", "sleep"; 568 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; 569 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; 570 571 vddio-supply = <&vreg_l12b_1p8>; 572 vci-supply = <&vreg_l13b_3p0>; 573 vdd-supply = <&vreg_l11b_1p2>; 574 575 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 576 577 port { 578 panel0_in: endpoint { 579 remote-endpoint = <&mdss_dsi0_out>; 580 }; 581 }; 582 }; 583}; 584 585&mdss_dsi0_out { 586 remote-endpoint = <&panel0_in>; 587 data-lanes = <0 1 2 3>; 588}; 589 590&mdss_dsi0_phy { 591 vdds-supply = <&vreg_l1e_0p88>; 592 status = "okay"; 593}; 594 595&mdss_dp0 { 596 status = "okay"; 597}; 598 599&mdss_dp0_out { 600 data-lanes = <0 1>; 601 remote-endpoint = <&usb_dp_qmpphy_dp_in>; 602}; 603 604&pcie_1_phy_aux_clk { 605 clock-frequency = <1000>; 606}; 607 608&pcie0 { 609 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 610 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 611 612 pinctrl-names = "default"; 613 pinctrl-0 = <&pcie0_default_state>; 614 615 status = "okay"; 616}; 617 618&pcie0_phy { 619 vdda-phy-supply = <&vreg_l1e_0p88>; 620 vdda-pll-supply = <&vreg_l3e_1p2>; 621 622 status = "okay"; 623}; 624 625&pcie1 { 626 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 627 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 628 629 pinctrl-names = "default"; 630 pinctrl-0 = <&pcie1_default_state>; 631 632 status = "okay"; 633}; 634 635&pcie1_phy { 636 vdda-phy-supply = <&vreg_l3c_0p91>; 637 vdda-pll-supply = <&vreg_l3e_1p2>; 638 vdda-qref-supply = <&vreg_l1e_0p88>; 639 640 status = "okay"; 641}; 642 643&pm8550_gpios { 644 sdc2_card_det_n: sdc2-card-det-state { 645 pins = "gpio12"; 646 function = "normal"; 647 input-enable; 648 output-disable; 649 bias-pull-up; 650 power-source = <1>; /* 1.8 V */ 651 }; 652}; 653 654&pm8550b_eusb2_repeater { 655 vdd18-supply = <&vreg_l15b_1p8>; 656 vdd3-supply = <&vreg_l5b_3p1>; 657}; 658 659&qupv3_id_0 { 660 status = "okay"; 661}; 662 663&remoteproc_adsp { 664 firmware-name = "qcom/sm8550/adsp.mbn", 665 "qcom/sm8550/adsp_dtb.mbn"; 666 status = "okay"; 667}; 668 669&remoteproc_cdsp { 670 firmware-name = "qcom/sm8550/cdsp.mbn", 671 "qcom/sm8550/cdsp_dtb.mbn"; 672 status = "okay"; 673}; 674 675&remoteproc_mpss { 676 firmware-name = "qcom/sm8550/modem.mbn", 677 "qcom/sm8550/modem_dtb.mbn"; 678 status = "okay"; 679}; 680 681&sdhc_2 { 682 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; 683 pinctrl-names = "default", "sleep"; 684 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; 685 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; 686 vmmc-supply = <&vreg_l9b_2p9>; 687 vqmmc-supply = <&vreg_l8b_1p8>; 688 bus-width = <4>; 689 no-sdio; 690 no-mmc; 691 status = "okay"; 692}; 693 694&sleep_clk { 695 clock-frequency = <32000>; 696}; 697 698&swr0 { 699 status = "okay"; 700 701 /* WSA8845 */ 702 left_spkr: speaker@0,0 { 703 compatible = "sdw20217020400"; 704 reg = <0 0>; 705 pinctrl-names = "default"; 706 pinctrl-0 = <&spkr_1_sd_n_active>; 707 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; 708 #sound-dai-cells = <0>; 709 sound-name-prefix = "SpkrLeft"; 710 vdd-1p8-supply = <&vreg_l15b_1p8>; 711 vdd-io-supply = <&vreg_l3g_1p2>; 712 }; 713 714 /* WSA8845 */ 715 right_spkr: speaker@0,1 { 716 compatible = "sdw20217020400"; 717 reg = <0 1>; 718 pinctrl-names = "default"; 719 pinctrl-0 = <&spkr_2_sd_n_active>; 720 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; 721 #sound-dai-cells = <0>; 722 sound-name-prefix = "SpkrRight"; 723 vdd-1p8-supply = <&vreg_l15b_1p8>; 724 vdd-io-supply = <&vreg_l3g_1p2>; 725 }; 726}; 727 728&swr1 { 729 status = "okay"; 730 731 /* WCD9385 RX */ 732 wcd_rx: codec@0,4 { 733 compatible = "sdw20217010d00"; 734 reg = <0 4>; 735 qcom,rx-port-mapping = <1 2 3 4 5>; 736 }; 737}; 738 739&swr2 { 740 status = "okay"; 741 742 /* WCD9385 TX */ 743 wcd_tx: codec@0,3 { 744 compatible = "sdw20217010d00"; 745 reg = <0 3>; 746 qcom,tx-port-mapping = <2 2 3 4>; 747 }; 748}; 749 750&tlmm { 751 gpio-reserved-ranges = <32 8>; 752 753 sde_dsi_active: sde-dsi-active-state { 754 pins = "gpio133"; 755 function = "gpio"; 756 drive-strength = <8>; 757 bias-disable; 758 }; 759 760 sde_dsi_suspend: sde-dsi-suspend-state { 761 pins = "gpio133"; 762 function = "gpio"; 763 drive-strength = <2>; 764 bias-pull-down; 765 }; 766 767 sde_te_active: sde-te-active-state { 768 pins = "gpio86"; 769 function = "mdp_vsync"; 770 drive-strength = <2>; 771 bias-pull-down; 772 }; 773 774 sde_te_suspend: sde-te-suspend-state { 775 pins = "gpio86"; 776 function = "mdp_vsync"; 777 drive-strength = <2>; 778 bias-pull-down; 779 }; 780 781 wcd_default: wcd-reset-n-active-state { 782 pins = "gpio108"; 783 function = "gpio"; 784 drive-strength = <16>; 785 bias-disable; 786 output-low; 787 }; 788}; 789 790&uart7 { 791 status = "okay"; 792}; 793 794&ufs_mem_hc { 795 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 796 vcc-supply = <&vreg_l17b_2p5>; 797 vcc-max-microamp = <1300000>; 798 vccq-supply = <&vreg_l1g_1p2>; 799 vccq-max-microamp = <1200000>; 800 vccq2-supply = <&vreg_l3g_1p2>; 801 vccq2-max-microamp = <100>; 802 803 status = "okay"; 804}; 805 806&ufs_mem_phy { 807 vdda-phy-supply = <&vreg_l1d_0p88>; 808 vdda-pll-supply = <&vreg_l3e_1p2>; 809 810 status = "okay"; 811}; 812 813&usb_1 { 814 status = "okay"; 815}; 816 817&usb_1_dwc3 { 818 dr_mode = "otg"; 819 usb-role-switch; 820}; 821 822&usb_1_dwc3_hs { 823 remote-endpoint = <&pmic_glink_hs_in>; 824}; 825 826&usb_1_dwc3_ss { 827 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; 828}; 829 830&usb_1_hsphy { 831 vdd-supply = <&vreg_l1e_0p88>; 832 vdda12-supply = <&vreg_l3e_1p2>; 833 834 phys = <&pm8550b_eusb2_repeater>; 835 836 status = "okay"; 837}; 838 839&usb_dp_qmpphy { 840 vdda-phy-supply = <&vreg_l3e_1p2>; 841 vdda-pll-supply = <&vreg_l3f_0p91>; 842 843 orientation-switch; 844 845 status = "okay"; 846}; 847 848&usb_dp_qmpphy_dp_in { 849 remote-endpoint = <&mdss_dp0_out>; 850}; 851 852&usb_dp_qmpphy_out { 853 remote-endpoint = <&pmic_glink_ss_in>; 854}; 855 856&usb_dp_qmpphy_usb_ss_in { 857 remote-endpoint = <&usb_1_dwc3_ss>; 858}; 859 860&xo_board { 861 clock-frequency = <76800000>; 862}; 863