xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sm8450.dtsi (revision ac73d4bf)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Linaro Limited
4 */
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/qcom,gcc-sm8450.h>
8#include <dt-bindings/clock/qcom,rpmh.h>
9#include <dt-bindings/clock/qcom,sm8450-camcc.h>
10#include <dt-bindings/dma/qcom-gpi.h>
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/mailbox/qcom-ipcc.h>
13#include <dt-bindings/power/qcom-rpmpd.h>
14#include <dt-bindings/interconnect/qcom,sm8450.h>
15#include <dt-bindings/soc/qcom,rpmh-rsc.h>
16#include <dt-bindings/thermal/thermal.h>
17
18/ {
19	interrupt-parent = <&intc>;
20
21	#address-cells = <2>;
22	#size-cells = <2>;
23
24	chosen { };
25
26	clocks {
27		xo_board: xo-board {
28			compatible = "fixed-clock";
29			#clock-cells = <0>;
30			clock-frequency = <76800000>;
31		};
32
33		sleep_clk: sleep-clk {
34			compatible = "fixed-clock";
35			#clock-cells = <0>;
36			clock-frequency = <32000>;
37		};
38	};
39
40	cpus {
41		#address-cells = <2>;
42		#size-cells = <0>;
43
44		CPU0: cpu@0 {
45			device_type = "cpu";
46			compatible = "qcom,kryo780";
47			reg = <0x0 0x0>;
48			enable-method = "psci";
49			next-level-cache = <&L2_0>;
50			power-domains = <&CPU_PD0>;
51			power-domain-names = "psci";
52			qcom,freq-domain = <&cpufreq_hw 0>;
53			#cooling-cells = <2>;
54			L2_0: l2-cache {
55			      compatible = "cache";
56			      next-level-cache = <&L3_0>;
57				L3_0: l3-cache {
58				      compatible = "cache";
59				};
60			};
61		};
62
63		CPU1: cpu@100 {
64			device_type = "cpu";
65			compatible = "qcom,kryo780";
66			reg = <0x0 0x100>;
67			enable-method = "psci";
68			next-level-cache = <&L2_100>;
69			power-domains = <&CPU_PD1>;
70			power-domain-names = "psci";
71			qcom,freq-domain = <&cpufreq_hw 0>;
72			#cooling-cells = <2>;
73			L2_100: l2-cache {
74			      compatible = "cache";
75			      next-level-cache = <&L3_0>;
76			};
77		};
78
79		CPU2: cpu@200 {
80			device_type = "cpu";
81			compatible = "qcom,kryo780";
82			reg = <0x0 0x200>;
83			enable-method = "psci";
84			next-level-cache = <&L2_200>;
85			power-domains = <&CPU_PD2>;
86			power-domain-names = "psci";
87			qcom,freq-domain = <&cpufreq_hw 0>;
88			#cooling-cells = <2>;
89			L2_200: l2-cache {
90			      compatible = "cache";
91			      next-level-cache = <&L3_0>;
92			};
93		};
94
95		CPU3: cpu@300 {
96			device_type = "cpu";
97			compatible = "qcom,kryo780";
98			reg = <0x0 0x300>;
99			enable-method = "psci";
100			next-level-cache = <&L2_300>;
101			power-domains = <&CPU_PD3>;
102			power-domain-names = "psci";
103			qcom,freq-domain = <&cpufreq_hw 0>;
104			#cooling-cells = <2>;
105			L2_300: l2-cache {
106			      compatible = "cache";
107			      next-level-cache = <&L3_0>;
108			};
109		};
110
111		CPU4: cpu@400 {
112			device_type = "cpu";
113			compatible = "qcom,kryo780";
114			reg = <0x0 0x400>;
115			enable-method = "psci";
116			next-level-cache = <&L2_400>;
117			power-domains = <&CPU_PD4>;
118			power-domain-names = "psci";
119			qcom,freq-domain = <&cpufreq_hw 1>;
120			#cooling-cells = <2>;
121			L2_400: l2-cache {
122			      compatible = "cache";
123			      next-level-cache = <&L3_0>;
124			};
125		};
126
127		CPU5: cpu@500 {
128			device_type = "cpu";
129			compatible = "qcom,kryo780";
130			reg = <0x0 0x500>;
131			enable-method = "psci";
132			next-level-cache = <&L2_500>;
133			power-domains = <&CPU_PD5>;
134			power-domain-names = "psci";
135			qcom,freq-domain = <&cpufreq_hw 1>;
136			#cooling-cells = <2>;
137			L2_500: l2-cache {
138			      compatible = "cache";
139			      next-level-cache = <&L3_0>;
140			};
141
142		};
143
144		CPU6: cpu@600 {
145			device_type = "cpu";
146			compatible = "qcom,kryo780";
147			reg = <0x0 0x600>;
148			enable-method = "psci";
149			next-level-cache = <&L2_600>;
150			power-domains = <&CPU_PD6>;
151			power-domain-names = "psci";
152			qcom,freq-domain = <&cpufreq_hw 1>;
153			#cooling-cells = <2>;
154			L2_600: l2-cache {
155			      compatible = "cache";
156			      next-level-cache = <&L3_0>;
157			};
158		};
159
160		CPU7: cpu@700 {
161			device_type = "cpu";
162			compatible = "qcom,kryo780";
163			reg = <0x0 0x700>;
164			enable-method = "psci";
165			next-level-cache = <&L2_700>;
166			power-domains = <&CPU_PD7>;
167			power-domain-names = "psci";
168			qcom,freq-domain = <&cpufreq_hw 2>;
169			#cooling-cells = <2>;
170			L2_700: l2-cache {
171			      compatible = "cache";
172			      next-level-cache = <&L3_0>;
173			};
174		};
175
176		cpu-map {
177			cluster0 {
178				core0 {
179					cpu = <&CPU0>;
180				};
181
182				core1 {
183					cpu = <&CPU1>;
184				};
185
186				core2 {
187					cpu = <&CPU2>;
188				};
189
190				core3 {
191					cpu = <&CPU3>;
192				};
193
194				core4 {
195					cpu = <&CPU4>;
196				};
197
198				core5 {
199					cpu = <&CPU5>;
200				};
201
202				core6 {
203					cpu = <&CPU6>;
204				};
205
206				core7 {
207					cpu = <&CPU7>;
208				};
209			};
210		};
211
212		idle-states {
213			entry-method = "psci";
214
215			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
216				compatible = "arm,idle-state";
217				idle-state-name = "silver-rail-power-collapse";
218				arm,psci-suspend-param = <0x40000004>;
219				entry-latency-us = <800>;
220				exit-latency-us = <750>;
221				min-residency-us = <4090>;
222				local-timer-stop;
223			};
224
225			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
226				compatible = "arm,idle-state";
227				idle-state-name = "gold-rail-power-collapse";
228				arm,psci-suspend-param = <0x40000004>;
229				entry-latency-us = <600>;
230				exit-latency-us = <1550>;
231				min-residency-us = <4791>;
232				local-timer-stop;
233			};
234		};
235
236		domain-idle-states {
237			CLUSTER_SLEEP_0: cluster-sleep-0 {
238				compatible = "domain-idle-state";
239				idle-state-name = "cluster-l3-off";
240				arm,psci-suspend-param = <0x41000044>;
241				entry-latency-us = <1050>;
242				exit-latency-us = <2500>;
243				min-residency-us = <5309>;
244				local-timer-stop;
245			};
246
247			CLUSTER_SLEEP_1: cluster-sleep-1 {
248				compatible = "domain-idle-state";
249				idle-state-name = "cluster-power-collapse";
250				arm,psci-suspend-param = <0x4100c344>;
251				entry-latency-us = <2700>;
252				exit-latency-us = <3500>;
253				min-residency-us = <13959>;
254				local-timer-stop;
255			};
256		};
257	};
258
259	firmware {
260		scm: scm {
261			compatible = "qcom,scm-sm8450", "qcom,scm";
262			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
263			#reset-cells = <1>;
264		};
265	};
266
267	clk_virt: interconnect-0 {
268		compatible = "qcom,sm8450-clk-virt";
269		#interconnect-cells = <2>;
270		qcom,bcm-voters = <&apps_bcm_voter>;
271	};
272
273	mc_virt: interconnect-1 {
274		compatible = "qcom,sm8450-mc-virt";
275		#interconnect-cells = <2>;
276		qcom,bcm-voters = <&apps_bcm_voter>;
277	};
278
279	memory@a0000000 {
280		device_type = "memory";
281		/* We expect the bootloader to fill in the size */
282		reg = <0x0 0xa0000000 0x0 0x0>;
283	};
284
285	pmu {
286		compatible = "arm,armv8-pmuv3";
287		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
288	};
289
290	psci {
291		compatible = "arm,psci-1.0";
292		method = "smc";
293
294		CPU_PD0: cpu0 {
295			#power-domain-cells = <0>;
296			power-domains = <&CLUSTER_PD>;
297			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
298		};
299
300		CPU_PD1: cpu1 {
301			#power-domain-cells = <0>;
302			power-domains = <&CLUSTER_PD>;
303			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
304		};
305
306		CPU_PD2: cpu2 {
307			#power-domain-cells = <0>;
308			power-domains = <&CLUSTER_PD>;
309			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
310		};
311
312		CPU_PD3: cpu3 {
313			#power-domain-cells = <0>;
314			power-domains = <&CLUSTER_PD>;
315			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
316		};
317
318		CPU_PD4: cpu4 {
319			#power-domain-cells = <0>;
320			power-domains = <&CLUSTER_PD>;
321			domain-idle-states = <&BIG_CPU_SLEEP_0>;
322		};
323
324		CPU_PD5: cpu5 {
325			#power-domain-cells = <0>;
326			power-domains = <&CLUSTER_PD>;
327			domain-idle-states = <&BIG_CPU_SLEEP_0>;
328		};
329
330		CPU_PD6: cpu6 {
331			#power-domain-cells = <0>;
332			power-domains = <&CLUSTER_PD>;
333			domain-idle-states = <&BIG_CPU_SLEEP_0>;
334		};
335
336		CPU_PD7: cpu7 {
337			#power-domain-cells = <0>;
338			power-domains = <&CLUSTER_PD>;
339			domain-idle-states = <&BIG_CPU_SLEEP_0>;
340		};
341
342		CLUSTER_PD: cpu-cluster0 {
343			#power-domain-cells = <0>;
344			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
345		};
346	};
347
348	qup_opp_table_100mhz: opp-table-qup {
349		compatible = "operating-points-v2";
350
351		opp-50000000 {
352			opp-hz = /bits/ 64 <50000000>;
353			required-opps = <&rpmhpd_opp_min_svs>;
354		};
355
356		opp-75000000 {
357			opp-hz = /bits/ 64 <75000000>;
358			required-opps = <&rpmhpd_opp_low_svs>;
359		};
360
361		opp-100000000 {
362			opp-hz = /bits/ 64 <100000000>;
363			required-opps = <&rpmhpd_opp_svs>;
364		};
365	};
366
367	reserved_memory: reserved-memory {
368		#address-cells = <2>;
369		#size-cells = <2>;
370		ranges;
371
372		hyp_mem: memory@80000000 {
373			reg = <0x0 0x80000000 0x0 0x600000>;
374			no-map;
375		};
376
377		xbl_dt_log_mem: memory@80600000 {
378			reg = <0x0 0x80600000 0x0 0x40000>;
379			no-map;
380		};
381
382		xbl_ramdump_mem: memory@80640000 {
383			reg = <0x0 0x80640000 0x0 0x180000>;
384			no-map;
385		};
386
387		xbl_sc_mem: memory@807c0000 {
388			reg = <0x0 0x807c0000 0x0 0x40000>;
389			no-map;
390		};
391
392		aop_image_mem: memory@80800000 {
393			reg = <0x0 0x80800000 0x0 0x60000>;
394			no-map;
395		};
396
397		aop_cmd_db_mem: memory@80860000 {
398			compatible = "qcom,cmd-db";
399			reg = <0x0 0x80860000 0x0 0x20000>;
400			no-map;
401		};
402
403		aop_config_mem: memory@80880000 {
404			reg = <0x0 0x80880000 0x0 0x20000>;
405			no-map;
406		};
407
408		tme_crash_dump_mem: memory@808a0000 {
409			reg = <0x0 0x808a0000 0x0 0x40000>;
410			no-map;
411		};
412
413		tme_log_mem: memory@808e0000 {
414			reg = <0x0 0x808e0000 0x0 0x4000>;
415			no-map;
416		};
417
418		uefi_log_mem: memory@808e4000 {
419			reg = <0x0 0x808e4000 0x0 0x10000>;
420			no-map;
421		};
422
423		/* secdata region can be reused by apps */
424		smem: memory@80900000 {
425			compatible = "qcom,smem";
426			reg = <0x0 0x80900000 0x0 0x200000>;
427			hwlocks = <&tcsr_mutex 3>;
428			no-map;
429		};
430
431		cpucp_fw_mem: memory@80b00000 {
432			reg = <0x0 0x80b00000 0x0 0x100000>;
433			no-map;
434		};
435
436		cdsp_secure_heap: memory@80c00000 {
437			reg = <0x0 0x80c00000 0x0 0x4600000>;
438			no-map;
439		};
440
441		video_mem: memory@85700000 {
442			reg = <0x0 0x85700000 0x0 0x700000>;
443			no-map;
444		};
445
446		adsp_mem: memory@85e00000 {
447			reg = <0x0 0x85e00000 0x0 0x2100000>;
448			no-map;
449		};
450
451		slpi_mem: memory@88000000 {
452			reg = <0x0 0x88000000 0x0 0x1900000>;
453			no-map;
454		};
455
456		cdsp_mem: memory@89900000 {
457			reg = <0x0 0x89900000 0x0 0x2000000>;
458			no-map;
459		};
460
461		ipa_fw_mem: memory@8b900000 {
462			reg = <0x0 0x8b900000 0x0 0x10000>;
463			no-map;
464		};
465
466		ipa_gsi_mem: memory@8b910000 {
467			reg = <0x0 0x8b910000 0x0 0xa000>;
468			no-map;
469		};
470
471		gpu_micro_code_mem: memory@8b91a000 {
472			reg = <0x0 0x8b91a000 0x0 0x2000>;
473			no-map;
474		};
475
476		spss_region_mem: memory@8ba00000 {
477			reg = <0x0 0x8ba00000 0x0 0x180000>;
478			no-map;
479		};
480
481		/* First part of the "SPU secure shared memory" region */
482		spu_tz_shared_mem: memory@8bb80000 {
483			reg = <0x0 0x8bb80000 0x0 0x60000>;
484			no-map;
485		};
486
487		/* Second part of the "SPU secure shared memory" region */
488		spu_modem_shared_mem: memory@8bbe0000 {
489			reg = <0x0 0x8bbe0000 0x0 0x20000>;
490			no-map;
491		};
492
493		mpss_mem: memory@8bc00000 {
494			reg = <0x0 0x8bc00000 0x0 0x13200000>;
495			no-map;
496		};
497
498		cvp_mem: memory@9ee00000 {
499			reg = <0x0 0x9ee00000 0x0 0x700000>;
500			no-map;
501		};
502
503		camera_mem: memory@9f500000 {
504			reg = <0x0 0x9f500000 0x0 0x800000>;
505			no-map;
506		};
507
508		rmtfs_mem: memory@9fd00000 {
509			compatible = "qcom,rmtfs-mem";
510			reg = <0x0 0x9fd00000 0x0 0x280000>;
511			no-map;
512
513			qcom,client-id = <1>;
514			qcom,vmid = <15>;
515		};
516
517		xbl_sc_mem2: memory@a6e00000 {
518			reg = <0x0 0xa6e00000 0x0 0x40000>;
519			no-map;
520		};
521
522		global_sync_mem: memory@a6f00000 {
523			reg = <0x0 0xa6f00000 0x0 0x100000>;
524			no-map;
525		};
526
527		/* uefi region can be reused by APPS */
528
529		/* Linux kernel image is loaded at 0xa0000000 */
530
531		oem_vm_mem: memory@bb000000 {
532			reg = <0x0 0xbb000000 0x0 0x5000000>;
533			no-map;
534		};
535
536		mte_mem: memory@c0000000 {
537			reg = <0x0 0xc0000000 0x0 0x20000000>;
538			no-map;
539		};
540
541		qheebsp_reserved_mem: memory@e0000000 {
542			reg = <0x0 0xe0000000 0x0 0x600000>;
543			no-map;
544		};
545
546		cpusys_vm_mem: memory@e0600000 {
547			reg = <0x0 0xe0600000 0x0 0x400000>;
548			no-map;
549		};
550
551		hyp_reserved_mem: memory@e0a00000 {
552			reg = <0x0 0xe0a00000 0x0 0x100000>;
553			no-map;
554		};
555
556		trust_ui_vm_mem: memory@e0b00000 {
557			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
558			no-map;
559		};
560
561		trust_ui_vm_qrtr: memory@e55f3000 {
562			reg = <0x0 0xe55f3000 0x0 0x9000>;
563			no-map;
564		};
565
566		trust_ui_vm_vblk0_ring: memory@e55fc000 {
567			reg = <0x0 0xe55fc000 0x0 0x4000>;
568			no-map;
569		};
570
571		trust_ui_vm_swiotlb: memory@e5600000 {
572			reg = <0x0 0xe5600000 0x0 0x100000>;
573			no-map;
574		};
575
576		tz_stat_mem: memory@e8800000 {
577			reg = <0x0 0xe8800000 0x0 0x100000>;
578			no-map;
579		};
580
581		tags_mem: memory@e8900000 {
582			reg = <0x0 0xe8900000 0x0 0x1200000>;
583			no-map;
584		};
585
586		qtee_mem: memory@e9b00000 {
587			reg = <0x0 0xe9b00000 0x0 0x500000>;
588			no-map;
589		};
590
591		trusted_apps_mem: memory@ea000000 {
592			reg = <0x0 0xea000000 0x0 0x3900000>;
593			no-map;
594		};
595
596		trusted_apps_ext_mem: memory@ed900000 {
597			reg = <0x0 0xed900000 0x0 0x3b00000>;
598			no-map;
599		};
600	};
601
602	smp2p-adsp {
603		compatible = "qcom,smp2p";
604		qcom,smem = <443>, <429>;
605		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
606					     IPCC_MPROC_SIGNAL_SMP2P
607					     IRQ_TYPE_EDGE_RISING>;
608		mboxes = <&ipcc IPCC_CLIENT_LPASS
609				IPCC_MPROC_SIGNAL_SMP2P>;
610
611		qcom,local-pid = <0>;
612		qcom,remote-pid = <2>;
613
614		smp2p_adsp_out: master-kernel {
615			qcom,entry-name = "master-kernel";
616			#qcom,smem-state-cells = <1>;
617		};
618
619		smp2p_adsp_in: slave-kernel {
620			qcom,entry-name = "slave-kernel";
621			interrupt-controller;
622			#interrupt-cells = <2>;
623		};
624	};
625
626	smp2p-cdsp {
627		compatible = "qcom,smp2p";
628		qcom,smem = <94>, <432>;
629		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
630					     IPCC_MPROC_SIGNAL_SMP2P
631					     IRQ_TYPE_EDGE_RISING>;
632		mboxes = <&ipcc IPCC_CLIENT_CDSP
633				IPCC_MPROC_SIGNAL_SMP2P>;
634
635		qcom,local-pid = <0>;
636		qcom,remote-pid = <5>;
637
638		smp2p_cdsp_out: master-kernel {
639			qcom,entry-name = "master-kernel";
640			#qcom,smem-state-cells = <1>;
641		};
642
643		smp2p_cdsp_in: slave-kernel {
644			qcom,entry-name = "slave-kernel";
645			interrupt-controller;
646			#interrupt-cells = <2>;
647		};
648	};
649
650	smp2p-modem {
651		compatible = "qcom,smp2p";
652		qcom,smem = <435>, <428>;
653		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
654					     IPCC_MPROC_SIGNAL_SMP2P
655					     IRQ_TYPE_EDGE_RISING>;
656		mboxes = <&ipcc IPCC_CLIENT_MPSS
657				IPCC_MPROC_SIGNAL_SMP2P>;
658
659		qcom,local-pid = <0>;
660		qcom,remote-pid = <1>;
661
662		smp2p_modem_out: master-kernel {
663			qcom,entry-name = "master-kernel";
664			#qcom,smem-state-cells = <1>;
665		};
666
667		smp2p_modem_in: slave-kernel {
668			qcom,entry-name = "slave-kernel";
669			interrupt-controller;
670			#interrupt-cells = <2>;
671		};
672
673		ipa_smp2p_out: ipa-ap-to-modem {
674			qcom,entry-name = "ipa";
675			#qcom,smem-state-cells = <1>;
676		};
677
678		ipa_smp2p_in: ipa-modem-to-ap {
679			qcom,entry-name = "ipa";
680			interrupt-controller;
681			#interrupt-cells = <2>;
682		};
683	};
684
685	smp2p-slpi {
686		compatible = "qcom,smp2p";
687		qcom,smem = <481>, <430>;
688		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
689					     IPCC_MPROC_SIGNAL_SMP2P
690					     IRQ_TYPE_EDGE_RISING>;
691		mboxes = <&ipcc IPCC_CLIENT_SLPI
692				IPCC_MPROC_SIGNAL_SMP2P>;
693
694		qcom,local-pid = <0>;
695		qcom,remote-pid = <3>;
696
697		smp2p_slpi_out: master-kernel {
698			qcom,entry-name = "master-kernel";
699			#qcom,smem-state-cells = <1>;
700		};
701
702		smp2p_slpi_in: slave-kernel {
703			qcom,entry-name = "slave-kernel";
704			interrupt-controller;
705			#interrupt-cells = <2>;
706		};
707	};
708
709	soc: soc@0 {
710		#address-cells = <2>;
711		#size-cells = <2>;
712		ranges = <0 0 0 0 0x10 0>;
713		dma-ranges = <0 0 0 0 0x10 0>;
714		compatible = "simple-bus";
715
716		gcc: clock-controller@100000 {
717			compatible = "qcom,gcc-sm8450";
718			reg = <0x0 0x00100000 0x0 0x1f4200>;
719			#clock-cells = <1>;
720			#reset-cells = <1>;
721			#power-domain-cells = <1>;
722			clocks = <&rpmhcc RPMH_CXO_CLK>,
723				 <&pcie0_lane>,
724				 <&pcie1_lane>,
725				 <&sleep_clk>;
726			clock-names = "bi_tcxo",
727				      "pcie_0_pipe_clk",
728				      "pcie_1_pipe_clk",
729				      "sleep_clk";
730		};
731
732		gpi_dma2: dma-controller@800000 {
733			compatible = "qcom,sm8450-gpi-dma";
734			#dma-cells = <3>;
735			reg = <0 0x800000 0 0x60000>;
736			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
737				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
738				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
739				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
740				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
741				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
742				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
743				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
744				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
745				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
746				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
747				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
748			dma-channels = <12>;
749			dma-channel-mask = <0x7e>;
750			iommus = <&apps_smmu 0x496 0x0>;
751			status = "disabled";
752		};
753
754		qupv3_id_2: geniqup@8c0000 {
755			compatible = "qcom,geni-se-qup";
756			reg = <0x0 0x008c0000 0x0 0x2000>;
757			clock-names = "m-ahb", "s-ahb";
758			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
759				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
760			iommus = <&apps_smmu 0x483 0x0>;
761			#address-cells = <2>;
762			#size-cells = <2>;
763			ranges;
764			status = "disabled";
765
766			i2c15: i2c@880000 {
767				compatible = "qcom,geni-i2c";
768				reg = <0x0 0x00880000 0x0 0x4000>;
769				clock-names = "se";
770				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
771				pinctrl-names = "default";
772				pinctrl-0 = <&qup_i2c15_data_clk>;
773				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
774				#address-cells = <1>;
775				#size-cells = <0>;
776				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
777						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
778						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
779				interconnect-names = "qup-core", "qup-config", "qup-memory";
780				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
781				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
782				dma-names = "tx", "rx";
783				status = "disabled";
784			};
785
786			spi15: spi@880000 {
787				compatible = "qcom,geni-spi";
788				reg = <0x0 0x00880000 0x0 0x4000>;
789				clock-names = "se";
790				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
791				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
792				pinctrl-names = "default";
793				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
794				spi-max-frequency = <50000000>;
795				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
796						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
797				interconnect-names = "qup-core", "qup-config";
798				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
799				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
800				dma-names = "tx", "rx";
801				#address-cells = <1>;
802				#size-cells = <0>;
803				status = "disabled";
804			};
805
806			i2c16: i2c@884000 {
807				compatible = "qcom,geni-i2c";
808				reg = <0x0 0x00884000 0x0 0x4000>;
809				clock-names = "se";
810				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
811				pinctrl-names = "default";
812				pinctrl-0 = <&qup_i2c16_data_clk>;
813				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
814				#address-cells = <1>;
815				#size-cells = <0>;
816				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
817						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
818						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
819				interconnect-names = "qup-core", "qup-config", "qup-memory";
820				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
821				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
822				dma-names = "tx", "rx";
823				status = "disabled";
824			};
825
826			spi16: spi@884000 {
827				compatible = "qcom,geni-spi";
828				reg = <0x0 0x00884000 0x0 0x4000>;
829				clock-names = "se";
830				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
831				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
832				pinctrl-names = "default";
833				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
834				spi-max-frequency = <50000000>;
835				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
836						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
837				interconnect-names = "qup-core", "qup-config";
838				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
839				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
840				dma-names = "tx", "rx";
841				#address-cells = <1>;
842				#size-cells = <0>;
843				status = "disabled";
844			};
845
846			i2c17: i2c@888000 {
847				compatible = "qcom,geni-i2c";
848				reg = <0x0 0x00888000 0x0 0x4000>;
849				clock-names = "se";
850				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
851				pinctrl-names = "default";
852				pinctrl-0 = <&qup_i2c17_data_clk>;
853				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
854				#address-cells = <1>;
855				#size-cells = <0>;
856				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
857						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
858						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
859				interconnect-names = "qup-core", "qup-config", "qup-memory";
860				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
861				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
862				dma-names = "tx", "rx";
863				status = "disabled";
864			};
865
866			spi17: spi@888000 {
867				compatible = "qcom,geni-spi";
868				reg = <0x0 0x00888000 0x0 0x4000>;
869				clock-names = "se";
870				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
871				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
872				pinctrl-names = "default";
873				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
874				spi-max-frequency = <50000000>;
875				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
876						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
877				interconnect-names = "qup-core", "qup-config";
878				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
879				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
880				dma-names = "tx", "rx";
881				#address-cells = <1>;
882				#size-cells = <0>;
883				status = "disabled";
884			};
885
886			i2c18: i2c@88c000 {
887				compatible = "qcom,geni-i2c";
888				reg = <0x0 0x0088c000 0x0 0x4000>;
889				clock-names = "se";
890				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
891				pinctrl-names = "default";
892				pinctrl-0 = <&qup_i2c18_data_clk>;
893				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
894				#address-cells = <1>;
895				#size-cells = <0>;
896				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
897						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
898						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
899				interconnect-names = "qup-core", "qup-config", "qup-memory";
900				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
901				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
902				dma-names = "tx", "rx";
903				status = "disabled";
904			};
905
906			spi18: spi@88c000 {
907				compatible = "qcom,geni-spi";
908				reg = <0 0x0088c000 0 0x4000>;
909				clock-names = "se";
910				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
911				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
912				pinctrl-names = "default";
913				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
914				spi-max-frequency = <50000000>;
915				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
916						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
917				interconnect-names = "qup-core", "qup-config";
918				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
919				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
920				dma-names = "tx", "rx";
921				#address-cells = <1>;
922				#size-cells = <0>;
923				status = "disabled";
924			};
925
926			i2c19: i2c@890000 {
927				compatible = "qcom,geni-i2c";
928				reg = <0x0 0x00890000 0x0 0x4000>;
929				clock-names = "se";
930				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
931				pinctrl-names = "default";
932				pinctrl-0 = <&qup_i2c19_data_clk>;
933				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
934				#address-cells = <1>;
935				#size-cells = <0>;
936				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
937						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
938						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
939				interconnect-names = "qup-core", "qup-config", "qup-memory";
940				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
941				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
942				dma-names = "tx", "rx";
943				status = "disabled";
944			};
945
946			spi19: spi@890000 {
947				compatible = "qcom,geni-spi";
948				reg = <0 0x00890000 0 0x4000>;
949				clock-names = "se";
950				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
951				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
952				pinctrl-names = "default";
953				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
954				spi-max-frequency = <50000000>;
955				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
956						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
957				interconnect-names = "qup-core", "qup-config";
958				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
959				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
960				dma-names = "tx", "rx";
961				#address-cells = <1>;
962				#size-cells = <0>;
963				status = "disabled";
964			};
965
966			i2c20: i2c@894000 {
967				compatible = "qcom,geni-i2c";
968				reg = <0x0 0x00894000 0x0 0x4000>;
969				clock-names = "se";
970				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
971				pinctrl-names = "default";
972				pinctrl-0 = <&qup_i2c20_data_clk>;
973				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
974				#address-cells = <1>;
975				#size-cells = <0>;
976				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
977						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
978						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
979				interconnect-names = "qup-core", "qup-config", "qup-memory";
980				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
981				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
982				dma-names = "tx", "rx";
983				status = "disabled";
984			};
985
986			uart20: serial@894000 {
987				compatible = "qcom,geni-uart";
988				reg = <0 0x00894000 0 0x4000>;
989				clock-names = "se";
990				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
991				pinctrl-names = "default";
992				pinctrl-0 = <&qup_uart20_default>;
993				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
994				#address-cells = <1>;
995				#size-cells = <0>;
996				status = "disabled";
997			};
998
999			spi20: spi@894000 {
1000				compatible = "qcom,geni-spi";
1001				reg = <0 0x00894000 0 0x4000>;
1002				clock-names = "se";
1003				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1004				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1005				pinctrl-names = "default";
1006				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
1007				spi-max-frequency = <50000000>;
1008				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1009						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1010				interconnect-names = "qup-core", "qup-config";
1011				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1012				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1013				dma-names = "tx", "rx";
1014				#address-cells = <1>;
1015				#size-cells = <0>;
1016				status = "disabled";
1017			};
1018
1019			i2c21: i2c@898000 {
1020				compatible = "qcom,geni-i2c";
1021				reg = <0x0 0x00898000 0x0 0x4000>;
1022				clock-names = "se";
1023				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1024				pinctrl-names = "default";
1025				pinctrl-0 = <&qup_i2c21_data_clk>;
1026				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1027				#address-cells = <1>;
1028				#size-cells = <0>;
1029				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1030						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1031						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
1032				interconnect-names = "qup-core", "qup-config", "qup-memory";
1033				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
1034				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
1035				dma-names = "tx", "rx";
1036				status = "disabled";
1037			};
1038
1039			spi21: spi@898000 {
1040				compatible = "qcom,geni-spi";
1041				reg = <0 0x00898000 0 0x4000>;
1042				clock-names = "se";
1043				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1044				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1045				pinctrl-names = "default";
1046				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
1047				spi-max-frequency = <50000000>;
1048				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1049						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1050				interconnect-names = "qup-core", "qup-config";
1051				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
1052				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
1053				dma-names = "tx", "rx";
1054				#address-cells = <1>;
1055				#size-cells = <0>;
1056				status = "disabled";
1057			};
1058		};
1059
1060		gpi_dma0: dma-controller@900000 {
1061			compatible = "qcom,sm8450-gpi-dma";
1062			#dma-cells = <3>;
1063			reg = <0 0x900000 0 0x60000>;
1064			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1065				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1066				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
1067				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1068				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1069				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1070				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1071				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1072				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1073				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1074				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1075				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1076			dma-channels = <12>;
1077			dma-channel-mask = <0x7e>;
1078			iommus = <&apps_smmu 0x5b6 0x0>;
1079			status = "disabled";
1080		};
1081
1082		qupv3_id_0: geniqup@9c0000 {
1083			compatible = "qcom,geni-se-qup";
1084			reg = <0x0 0x009c0000 0x0 0x2000>;
1085			clock-names = "m-ahb", "s-ahb";
1086			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1087				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1088			iommus = <&apps_smmu 0x5a3 0x0>;
1089			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
1090			interconnect-names = "qup-core";
1091			#address-cells = <2>;
1092			#size-cells = <2>;
1093			ranges;
1094			status = "disabled";
1095
1096			i2c0: i2c@980000 {
1097				compatible = "qcom,geni-i2c";
1098				reg = <0x0 0x00980000 0x0 0x4000>;
1099				clock-names = "se";
1100				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1101				pinctrl-names = "default";
1102				pinctrl-0 = <&qup_i2c0_data_clk>;
1103				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1104				#address-cells = <1>;
1105				#size-cells = <0>;
1106				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1107						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1108						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1109				interconnect-names = "qup-core", "qup-config", "qup-memory";
1110				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1111				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1112				dma-names = "tx", "rx";
1113				status = "disabled";
1114			};
1115
1116			spi0: spi@980000 {
1117				compatible = "qcom,geni-spi";
1118				reg = <0x0 0x00980000 0x0 0x4000>;
1119				clock-names = "se";
1120				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1121				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1122				pinctrl-names = "default";
1123				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1124				power-domains = <&rpmhpd SM8450_CX>;
1125				operating-points-v2 = <&qup_opp_table_100mhz>;
1126				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1127						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1128						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1129				interconnect-names = "qup-core", "qup-config", "qup-memory";
1130				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1131				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1132				dma-names = "tx", "rx";
1133				#address-cells = <1>;
1134				#size-cells = <0>;
1135				status = "disabled";
1136			};
1137
1138			i2c1: i2c@984000 {
1139				compatible = "qcom,geni-i2c";
1140				reg = <0x0 0x00984000 0x0 0x4000>;
1141				clock-names = "se";
1142				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1143				pinctrl-names = "default";
1144				pinctrl-0 = <&qup_i2c1_data_clk>;
1145				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1146				#address-cells = <1>;
1147				#size-cells = <0>;
1148				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1149						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1150						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1151				interconnect-names = "qup-core", "qup-config", "qup-memory";
1152				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1153				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1154				dma-names = "tx", "rx";
1155				status = "disabled";
1156			};
1157
1158			spi1: spi@984000 {
1159				compatible = "qcom,geni-spi";
1160				reg = <0x0 0x00984000 0x0 0x4000>;
1161				clock-names = "se";
1162				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1163				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1164				pinctrl-names = "default";
1165				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1166				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1167						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1168						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1169				interconnect-names = "qup-core", "qup-config", "qup-memory";
1170				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1171				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1172				dma-names = "tx", "rx";
1173				#address-cells = <1>;
1174				#size-cells = <0>;
1175				status = "disabled";
1176			};
1177
1178			i2c2: i2c@988000 {
1179				compatible = "qcom,geni-i2c";
1180				reg = <0x0 0x00988000 0x0 0x4000>;
1181				clock-names = "se";
1182				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1183				pinctrl-names = "default";
1184				pinctrl-0 = <&qup_i2c2_data_clk>;
1185				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1186				#address-cells = <1>;
1187				#size-cells = <0>;
1188				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1189						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1190						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1191				interconnect-names = "qup-core", "qup-config", "qup-memory";
1192				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1193				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1194				dma-names = "tx", "rx";
1195				status = "disabled";
1196			};
1197
1198			spi2: spi@988000 {
1199				compatible = "qcom,geni-spi";
1200				reg = <0x0 0x00988000 0x0 0x4000>;
1201				clock-names = "se";
1202				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1203				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1204				pinctrl-names = "default";
1205				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1206				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1207						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1208						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1209				interconnect-names = "qup-core", "qup-config", "qup-memory";
1210				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1211				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1212				dma-names = "tx", "rx";
1213				#address-cells = <1>;
1214				#size-cells = <0>;
1215				status = "disabled";
1216			};
1217
1218
1219			i2c3: i2c@98c000 {
1220				compatible = "qcom,geni-i2c";
1221				reg = <0x0 0x0098c000 0x0 0x4000>;
1222				clock-names = "se";
1223				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1224				pinctrl-names = "default";
1225				pinctrl-0 = <&qup_i2c3_data_clk>;
1226				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1227				#address-cells = <1>;
1228				#size-cells = <0>;
1229				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1230						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1231						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1232				interconnect-names = "qup-core", "qup-config", "qup-memory";
1233				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1234				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1235				dma-names = "tx", "rx";
1236				status = "disabled";
1237			};
1238
1239			spi3: spi@98c000 {
1240				compatible = "qcom,geni-spi";
1241				reg = <0x0 0x0098c000 0x0 0x4000>;
1242				clock-names = "se";
1243				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1244				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1245				pinctrl-names = "default";
1246				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1247				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1248						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1249						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1250				interconnect-names = "qup-core", "qup-config", "qup-memory";
1251				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1252				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1253				dma-names = "tx", "rx";
1254				#address-cells = <1>;
1255				#size-cells = <0>;
1256				status = "disabled";
1257			};
1258
1259			i2c4: i2c@990000 {
1260				compatible = "qcom,geni-i2c";
1261				reg = <0x0 0x00990000 0x0 0x4000>;
1262				clock-names = "se";
1263				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1264				pinctrl-names = "default";
1265				pinctrl-0 = <&qup_i2c4_data_clk>;
1266				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1267				#address-cells = <1>;
1268				#size-cells = <0>;
1269				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1270						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1271						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1272				interconnect-names = "qup-core", "qup-config", "qup-memory";
1273				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1274				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1275				dma-names = "tx", "rx";
1276				status = "disabled";
1277			};
1278
1279			spi4: spi@990000 {
1280				compatible = "qcom,geni-spi";
1281				reg = <0x0 0x00990000 0x0 0x4000>;
1282				clock-names = "se";
1283				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1284				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1285				pinctrl-names = "default";
1286				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1287				power-domains = <&rpmhpd SM8450_CX>;
1288				operating-points-v2 = <&qup_opp_table_100mhz>;
1289				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1290						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1291						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1292				interconnect-names = "qup-core", "qup-config", "qup-memory";
1293				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1294				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1295				dma-names = "tx", "rx";
1296				#address-cells = <1>;
1297				#size-cells = <0>;
1298				status = "disabled";
1299			};
1300
1301			i2c5: i2c@994000 {
1302				compatible = "qcom,geni-i2c";
1303				reg = <0x0 0x00994000 0x0 0x4000>;
1304				clock-names = "se";
1305				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1306				pinctrl-names = "default";
1307				pinctrl-0 = <&qup_i2c5_data_clk>;
1308				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1309				#address-cells = <1>;
1310				#size-cells = <0>;
1311				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1312						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1313						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1314				interconnect-names = "qup-core", "qup-config", "qup-memory";
1315				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1316				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1317				dma-names = "tx", "rx";
1318				status = "disabled";
1319			};
1320
1321			spi5: spi@994000 {
1322				compatible = "qcom,geni-spi";
1323				reg = <0x0 0x00994000 0x0 0x4000>;
1324				clock-names = "se";
1325				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1326				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1327				pinctrl-names = "default";
1328				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1329				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1330						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1331						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1332				interconnect-names = "qup-core", "qup-config", "qup-memory";
1333				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1334				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1335				dma-names = "tx", "rx";
1336				#address-cells = <1>;
1337				#size-cells = <0>;
1338				status = "disabled";
1339			};
1340
1341
1342			i2c6: i2c@998000 {
1343				compatible = "qcom,geni-i2c";
1344				reg = <0x0 0x998000 0x0 0x4000>;
1345				clock-names = "se";
1346				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1347				pinctrl-names = "default";
1348				pinctrl-0 = <&qup_i2c6_data_clk>;
1349				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1350				#address-cells = <1>;
1351				#size-cells = <0>;
1352				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1353						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1354						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1355				interconnect-names = "qup-core", "qup-config", "qup-memory";
1356				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1357				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1358				dma-names = "tx", "rx";
1359				status = "disabled";
1360			};
1361
1362			spi6: spi@998000 {
1363				compatible = "qcom,geni-spi";
1364				reg = <0x0 0x998000 0x0 0x4000>;
1365				clock-names = "se";
1366				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1367				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1368				pinctrl-names = "default";
1369				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1370				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1371						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1372						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1373				interconnect-names = "qup-core", "qup-config", "qup-memory";
1374				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1375				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1376				dma-names = "tx", "rx";
1377				#address-cells = <1>;
1378				#size-cells = <0>;
1379				status = "disabled";
1380			};
1381
1382			uart7: serial@99c000 {
1383				compatible = "qcom,geni-debug-uart";
1384				reg = <0 0x0099c000 0 0x4000>;
1385				clock-names = "se";
1386				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1387				pinctrl-names = "default";
1388				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
1389				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1390				#address-cells = <1>;
1391				#size-cells = <0>;
1392				status = "disabled";
1393			};
1394		};
1395
1396		gpi_dma1: dma-controller@a00000 {
1397			compatible = "qcom,sm8450-gpi-dma";
1398			#dma-cells = <3>;
1399			reg = <0 0xa00000 0 0x60000>;
1400			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1401				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1402				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1403				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1404				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1405				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1406				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1407				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1408				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1409				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1410				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1411				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1412			dma-channels = <12>;
1413			dma-channel-mask = <0x7e>;
1414			iommus = <&apps_smmu 0x56 0x0>;
1415			status = "disabled";
1416		};
1417
1418		qupv3_id_1: geniqup@ac0000 {
1419			compatible = "qcom,geni-se-qup";
1420			reg = <0x0 0x00ac0000 0x0 0x6000>;
1421			clock-names = "m-ahb", "s-ahb";
1422			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1423				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1424			iommus = <&apps_smmu 0x43 0x0>;
1425			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1426			interconnect-names = "qup-core";
1427			#address-cells = <2>;
1428			#size-cells = <2>;
1429			ranges;
1430			status = "disabled";
1431
1432			i2c8: i2c@a80000 {
1433				compatible = "qcom,geni-i2c";
1434				reg = <0x0 0x00a80000 0x0 0x4000>;
1435				clock-names = "se";
1436				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1437				pinctrl-names = "default";
1438				pinctrl-0 = <&qup_i2c8_data_clk>;
1439				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1440				#address-cells = <1>;
1441				#size-cells = <0>;
1442				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1443						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1444						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1445				interconnect-names = "qup-core", "qup-config", "qup-memory";
1446				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1447				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1448				dma-names = "tx", "rx";
1449				status = "disabled";
1450			};
1451
1452			spi8: spi@a80000 {
1453				compatible = "qcom,geni-spi";
1454				reg = <0x0 0x00a80000 0x0 0x4000>;
1455				clock-names = "se";
1456				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1457				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1458				pinctrl-names = "default";
1459				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
1460				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1461						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1462						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1463				interconnect-names = "qup-core", "qup-config", "qup-memory";
1464				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1465				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1466				dma-names = "tx", "rx";
1467				#address-cells = <1>;
1468				#size-cells = <0>;
1469				status = "disabled";
1470			};
1471
1472			i2c9: i2c@a84000 {
1473				compatible = "qcom,geni-i2c";
1474				reg = <0x0 0x00a84000 0x0 0x4000>;
1475				clock-names = "se";
1476				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1477				pinctrl-names = "default";
1478				pinctrl-0 = <&qup_i2c9_data_clk>;
1479				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1480				#address-cells = <1>;
1481				#size-cells = <0>;
1482				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1483						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1484						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1485				interconnect-names = "qup-core", "qup-config", "qup-memory";
1486				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1487				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1488				dma-names = "tx", "rx";
1489				status = "disabled";
1490			};
1491
1492			spi9: spi@a84000 {
1493				compatible = "qcom,geni-spi";
1494				reg = <0x0 0x00a84000 0x0 0x4000>;
1495				clock-names = "se";
1496				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1497				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1498				pinctrl-names = "default";
1499				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
1500				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1501						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1502						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1503				interconnect-names = "qup-core", "qup-config", "qup-memory";
1504				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1505				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1506				dma-names = "tx", "rx";
1507				#address-cells = <1>;
1508				#size-cells = <0>;
1509				status = "disabled";
1510			};
1511
1512			i2c10: i2c@a88000 {
1513				compatible = "qcom,geni-i2c";
1514				reg = <0x0 0x00a88000 0x0 0x4000>;
1515				clock-names = "se";
1516				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1517				pinctrl-names = "default";
1518				pinctrl-0 = <&qup_i2c10_data_clk>;
1519				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1520				#address-cells = <1>;
1521				#size-cells = <0>;
1522				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1523						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1524						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1525				interconnect-names = "qup-core", "qup-config", "qup-memory";
1526				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1527				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1528				dma-names = "tx", "rx";
1529				status = "disabled";
1530			};
1531
1532			spi10: spi@a88000 {
1533				compatible = "qcom,geni-spi";
1534				reg = <0x0 0x00a88000 0x0 0x4000>;
1535				clock-names = "se";
1536				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1537				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1538				pinctrl-names = "default";
1539				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
1540				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1541						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1542						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1543				interconnect-names = "qup-core", "qup-config", "qup-memory";
1544				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1545				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1546				dma-names = "tx", "rx";
1547				#address-cells = <1>;
1548				#size-cells = <0>;
1549				status = "disabled";
1550			};
1551
1552			i2c11: i2c@a8c000 {
1553				compatible = "qcom,geni-i2c";
1554				reg = <0x0 0x00a8c000 0x0 0x4000>;
1555				clock-names = "se";
1556				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1557				pinctrl-names = "default";
1558				pinctrl-0 = <&qup_i2c11_data_clk>;
1559				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1560				#address-cells = <1>;
1561				#size-cells = <0>;
1562				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1563						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1564						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1565				interconnect-names = "qup-core", "qup-config", "qup-memory";
1566				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1567				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1568				dma-names = "tx", "rx";
1569				status = "disabled";
1570			};
1571
1572			spi11: spi@a8c000 {
1573				compatible = "qcom,geni-spi";
1574				reg = <0x0 0x00a8c000 0x0 0x4000>;
1575				clock-names = "se";
1576				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1577				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1578				pinctrl-names = "default";
1579				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
1580				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1581						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1582						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1583				interconnect-names = "qup-core", "qup-config", "qup-memory";
1584				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1585				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1586				dma-names = "tx", "rx";
1587				#address-cells = <1>;
1588				#size-cells = <0>;
1589				status = "disabled";
1590			};
1591
1592			i2c12: i2c@a90000 {
1593				compatible = "qcom,geni-i2c";
1594				reg = <0x0 0x00a90000 0x0 0x4000>;
1595				clock-names = "se";
1596				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1597				pinctrl-names = "default";
1598				pinctrl-0 = <&qup_i2c12_data_clk>;
1599				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1600				#address-cells = <1>;
1601				#size-cells = <0>;
1602				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1603						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1604						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1605				interconnect-names = "qup-core", "qup-config", "qup-memory";
1606				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1607				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1608				dma-names = "tx", "rx";
1609				status = "disabled";
1610			};
1611
1612			spi12: spi@a90000 {
1613				compatible = "qcom,geni-spi";
1614				reg = <0x0 0x00a90000 0x0 0x4000>;
1615				clock-names = "se";
1616				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1617				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1618				pinctrl-names = "default";
1619				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1620				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1621						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1622						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1623				interconnect-names = "qup-core", "qup-config", "qup-memory";
1624				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1625				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1626				dma-names = "tx", "rx";
1627				#address-cells = <1>;
1628				#size-cells = <0>;
1629				status = "disabled";
1630			};
1631
1632			i2c13: i2c@a94000 {
1633				compatible = "qcom,geni-i2c";
1634				reg = <0 0x00a94000 0 0x4000>;
1635				clock-names = "se";
1636				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1637				pinctrl-names = "default";
1638				pinctrl-0 = <&qup_i2c13_data_clk>;
1639				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1640				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1641						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1642						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1643				interconnect-names = "qup-core", "qup-config", "qup-memory";
1644				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1645				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1646				dma-names = "tx", "rx";
1647				#address-cells = <1>;
1648				#size-cells = <0>;
1649				status = "disabled";
1650			};
1651
1652			spi13: spi@a94000 {
1653				compatible = "qcom,geni-spi";
1654				reg = <0x0 0x00a94000 0x0 0x4000>;
1655				clock-names = "se";
1656				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1657				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1658				pinctrl-names = "default";
1659				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1660				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1661						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1662						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1663				interconnect-names = "qup-core", "qup-config", "qup-memory";
1664				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1665				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1666				dma-names = "tx", "rx";
1667				#address-cells = <1>;
1668				#size-cells = <0>;
1669				status = "disabled";
1670			};
1671
1672			i2c14: i2c@a98000 {
1673				compatible = "qcom,geni-i2c";
1674				reg = <0 0x00a98000 0 0x4000>;
1675				clock-names = "se";
1676				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1677				pinctrl-names = "default";
1678				pinctrl-0 = <&qup_i2c14_data_clk>;
1679				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1680				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1681						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1682						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1683				interconnect-names = "qup-core", "qup-config", "qup-memory";
1684				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1685				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1686				dma-names = "tx", "rx";
1687				#address-cells = <1>;
1688				#size-cells = <0>;
1689				status = "disabled";
1690			};
1691
1692			spi14: spi@a98000 {
1693				compatible = "qcom,geni-spi";
1694				reg = <0x0 0x00a98000 0x0 0x4000>;
1695				clock-names = "se";
1696				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1697				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1698				pinctrl-names = "default";
1699				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
1700				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1701						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1702						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1703				interconnect-names = "qup-core", "qup-config", "qup-memory";
1704				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1705				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1706				dma-names = "tx", "rx";
1707				#address-cells = <1>;
1708				#size-cells = <0>;
1709				status = "disabled";
1710			};
1711		};
1712
1713		pcie0: pci@1c00000 {
1714			compatible = "qcom,pcie-sm8450-pcie0";
1715			reg = <0 0x01c00000 0 0x3000>,
1716			      <0 0x60000000 0 0xf1d>,
1717			      <0 0x60000f20 0 0xa8>,
1718			      <0 0x60001000 0 0x1000>,
1719			      <0 0x60100000 0 0x100000>;
1720			reg-names = "parf", "dbi", "elbi", "atu", "config";
1721			device_type = "pci";
1722			linux,pci-domain = <0>;
1723			bus-range = <0x00 0xff>;
1724			num-lanes = <1>;
1725
1726			#address-cells = <3>;
1727			#size-cells = <2>;
1728
1729			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
1730				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
1731
1732			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1733			interrupt-names = "msi";
1734			#interrupt-cells = <1>;
1735			interrupt-map-mask = <0 0 0 0x7>;
1736			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1737					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1738					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1739					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1740
1741			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1742				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
1743				 <&pcie0_lane>,
1744				 <&rpmhcc RPMH_CXO_CLK>,
1745				 <&gcc GCC_PCIE_0_AUX_CLK>,
1746				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1747				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1748				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1749				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1750				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1751				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
1752				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1753			clock-names = "pipe",
1754				      "pipe_mux",
1755				      "phy_pipe",
1756				      "ref",
1757				      "aux",
1758				      "cfg",
1759				      "bus_master",
1760				      "bus_slave",
1761				      "slave_q2a",
1762				      "ddrss_sf_tbu",
1763				      "aggre0",
1764				      "aggre1";
1765
1766			iommus = <&apps_smmu 0x1c00 0x7f>;
1767			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
1768				    <0x100 &apps_smmu 0x1c01 0x1>;
1769
1770			resets = <&gcc GCC_PCIE_0_BCR>;
1771			reset-names = "pci";
1772
1773			power-domains = <&gcc PCIE_0_GDSC>;
1774			power-domain-names = "gdsc";
1775
1776			phys = <&pcie0_lane>;
1777			phy-names = "pciephy";
1778
1779			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
1780			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
1781
1782			pinctrl-names = "default";
1783			pinctrl-0 = <&pcie0_default_state>;
1784
1785			status = "disabled";
1786		};
1787
1788		pcie0_phy: phy@1c06000 {
1789			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
1790			reg = <0 0x01c06000 0 0x200>;
1791			#address-cells = <2>;
1792			#size-cells = <2>;
1793			ranges;
1794			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1795				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1796				 <&gcc GCC_PCIE_0_CLKREF_EN>,
1797				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1798			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1799
1800			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1801			reset-names = "phy";
1802
1803			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1804			assigned-clock-rates = <100000000>;
1805
1806			status = "disabled";
1807
1808			pcie0_lane: phy@1c06200 {
1809				reg = <0 0x1c06e00 0 0x200>, /* tx */
1810				      <0 0x1c07000 0 0x200>, /* rx */
1811				      <0 0x1c06200 0 0x200>, /* pcs */
1812				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
1813				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1814				clock-names = "pipe0";
1815
1816				#clock-cells = <0>;
1817				#phy-cells = <0>;
1818				clock-output-names = "pcie_0_pipe_clk";
1819			};
1820		};
1821
1822		pcie1: pci@1c08000 {
1823			compatible = "qcom,pcie-sm8450-pcie1";
1824			reg = <0 0x01c08000 0 0x3000>,
1825			      <0 0x40000000 0 0xf1d>,
1826			      <0 0x40000f20 0 0xa8>,
1827			      <0 0x40001000 0 0x1000>,
1828			      <0 0x40100000 0 0x100000>;
1829			reg-names = "parf", "dbi", "elbi", "atu", "config";
1830			device_type = "pci";
1831			linux,pci-domain = <1>;
1832			bus-range = <0x00 0xff>;
1833			num-lanes = <2>;
1834
1835			#address-cells = <3>;
1836			#size-cells = <2>;
1837
1838			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
1839				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
1840
1841			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1842			interrupt-names = "msi";
1843			#interrupt-cells = <1>;
1844			interrupt-map-mask = <0 0 0 0x7>;
1845			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1846					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1847					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1848					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1849
1850			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1851				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
1852				 <&pcie1_lane>,
1853				 <&rpmhcc RPMH_CXO_CLK>,
1854				 <&gcc GCC_PCIE_1_AUX_CLK>,
1855				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1856				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1857				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1858				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1859				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1860				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1861			clock-names = "pipe",
1862				      "pipe_mux",
1863				      "phy_pipe",
1864				      "ref",
1865				      "aux",
1866				      "cfg",
1867				      "bus_master",
1868				      "bus_slave",
1869				      "slave_q2a",
1870				      "ddrss_sf_tbu",
1871				      "aggre1";
1872
1873			iommus = <&apps_smmu 0x1c80 0x7f>;
1874			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
1875				    <0x100 &apps_smmu 0x1c81 0x1>;
1876
1877			resets = <&gcc GCC_PCIE_1_BCR>;
1878			reset-names = "pci";
1879
1880			power-domains = <&gcc PCIE_1_GDSC>;
1881			power-domain-names = "gdsc";
1882
1883			phys = <&pcie1_lane>;
1884			phy-names = "pciephy";
1885
1886			perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
1887			enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
1888
1889			pinctrl-names = "default";
1890			pinctrl-0 = <&pcie1_default_state>;
1891
1892			status = "disabled";
1893		};
1894
1895		pcie1_phy: phy@1c0f000 {
1896			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
1897			reg = <0 0x01c0f000 0 0x200>;
1898			#address-cells = <2>;
1899			#size-cells = <2>;
1900			ranges;
1901			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
1902				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1903				 <&gcc GCC_PCIE_1_CLKREF_EN>,
1904				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1905			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1906
1907			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
1908			reset-names = "phy";
1909
1910			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1911			assigned-clock-rates = <100000000>;
1912
1913			status = "disabled";
1914
1915			pcie1_lane: phy@1c0e000 {
1916				reg = <0 0x1c0e000 0 0x200>, /* tx */
1917				      <0 0x1c0e200 0 0x300>, /* rx */
1918				      <0 0x1c0f200 0 0x200>, /* pcs */
1919				      <0 0x1c0e800 0 0x200>, /* tx */
1920				      <0 0x1c0ea00 0 0x300>, /* rx */
1921				      <0 0x1c0f400 0 0xc00>; /* pcs_pcie */
1922				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
1923				clock-names = "pipe0";
1924
1925				#clock-cells = <0>;
1926				#phy-cells = <0>;
1927				clock-output-names = "pcie_1_pipe_clk";
1928			};
1929		};
1930
1931		config_noc: interconnect@1500000 {
1932			compatible = "qcom,sm8450-config-noc";
1933			reg = <0 0x01500000 0 0x1c000>;
1934			#interconnect-cells = <2>;
1935			qcom,bcm-voters = <&apps_bcm_voter>;
1936		};
1937
1938		system_noc: interconnect@1680000 {
1939			compatible = "qcom,sm8450-system-noc";
1940			reg = <0 0x01680000 0 0x1e200>;
1941			#interconnect-cells = <2>;
1942			qcom,bcm-voters = <&apps_bcm_voter>;
1943		};
1944
1945		pcie_noc: interconnect@16c0000 {
1946			compatible = "qcom,sm8450-pcie-anoc";
1947			reg = <0 0x016c0000 0 0xe280>;
1948			#interconnect-cells = <2>;
1949			qcom,bcm-voters = <&apps_bcm_voter>;
1950		};
1951
1952		aggre1_noc: interconnect@16e0000 {
1953			compatible = "qcom,sm8450-aggre1-noc";
1954			reg = <0 0x016e0000 0 0x1c080>;
1955			#interconnect-cells = <2>;
1956			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1957				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
1958			qcom,bcm-voters = <&apps_bcm_voter>;
1959		};
1960
1961		aggre2_noc: interconnect@1700000 {
1962			compatible = "qcom,sm8450-aggre2-noc";
1963			reg = <0 0x01700000 0 0x31080>;
1964			#interconnect-cells = <2>;
1965			qcom,bcm-voters = <&apps_bcm_voter>;
1966			clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
1967				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
1968				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1969				 <&rpmhcc RPMH_IPA_CLK>;
1970		};
1971
1972		mmss_noc: interconnect@1740000 {
1973			compatible = "qcom,sm8450-mmss-noc";
1974			reg = <0 0x01740000 0 0x1f080>;
1975			#interconnect-cells = <2>;
1976			qcom,bcm-voters = <&apps_bcm_voter>;
1977		};
1978
1979		tcsr_mutex: hwlock@1f40000 {
1980			compatible = "qcom,tcsr-mutex";
1981			reg = <0x0 0x01f40000 0x0 0x40000>;
1982			#hwlock-cells = <1>;
1983		};
1984
1985		usb_1_hsphy: phy@88e3000 {
1986			compatible = "qcom,sm8450-usb-hs-phy",
1987				     "qcom,usb-snps-hs-7nm-phy";
1988			reg = <0 0x088e3000 0 0x400>;
1989			status = "disabled";
1990			#phy-cells = <0>;
1991
1992			clocks = <&rpmhcc RPMH_CXO_CLK>;
1993			clock-names = "ref";
1994
1995			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
1996		};
1997
1998		usb_1_qmpphy: phy-wrapper@88e9000 {
1999			compatible = "qcom,sm8450-qmp-usb3-phy";
2000			reg = <0 0x088e9000 0 0x200>,
2001			      <0 0x088e8000 0 0x20>;
2002			status = "disabled";
2003			#address-cells = <2>;
2004			#size-cells = <2>;
2005			ranges;
2006
2007			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2008				 <&rpmhcc RPMH_CXO_CLK>,
2009				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2010			clock-names = "aux", "ref_clk_src", "com_aux";
2011
2012			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2013				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
2014			reset-names = "phy", "common";
2015
2016			usb_1_ssphy: phy@88e9200 {
2017				reg = <0 0x088e9200 0 0x200>,
2018				      <0 0x088e9400 0 0x200>,
2019				      <0 0x088e9c00 0 0x400>,
2020				      <0 0x088e9600 0 0x200>,
2021				      <0 0x088e9800 0 0x200>,
2022				      <0 0x088e9a00 0 0x100>;
2023				#phy-cells = <0>;
2024				#clock-cells = <0>;
2025				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2026				clock-names = "pipe0";
2027				clock-output-names = "usb3_phy_pipe_clk_src";
2028			};
2029		};
2030
2031		remoteproc_slpi: remoteproc@2400000 {
2032			compatible = "qcom,sm8450-slpi-pas";
2033			reg = <0 0x02400000 0 0x4000>;
2034
2035			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
2036					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2037					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2038					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2039					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2040			interrupt-names = "wdog", "fatal", "ready",
2041					  "handover", "stop-ack";
2042
2043			clocks = <&rpmhcc RPMH_CXO_CLK>;
2044			clock-names = "xo";
2045
2046			power-domains = <&rpmhpd SM8450_LCX>,
2047					<&rpmhpd SM8450_LMX>;
2048			power-domain-names = "lcx", "lmx";
2049
2050			memory-region = <&slpi_mem>;
2051
2052			qcom,qmp = <&aoss_qmp>;
2053
2054			qcom,smem-states = <&smp2p_slpi_out 0>;
2055			qcom,smem-state-names = "stop";
2056
2057			status = "disabled";
2058
2059			glink-edge {
2060				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2061							     IPCC_MPROC_SIGNAL_GLINK_QMP
2062							     IRQ_TYPE_EDGE_RISING>;
2063				mboxes = <&ipcc IPCC_CLIENT_SLPI
2064						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2065
2066				label = "slpi";
2067				qcom,remote-pid = <3>;
2068
2069				fastrpc {
2070					compatible = "qcom,fastrpc";
2071					qcom,glink-channels = "fastrpcglink-apps-dsp";
2072					label = "sdsp";
2073					#address-cells = <1>;
2074					#size-cells = <0>;
2075
2076					compute-cb@1 {
2077						compatible = "qcom,fastrpc-compute-cb";
2078						reg = <1>;
2079						iommus = <&apps_smmu 0x0541 0x0>;
2080					};
2081
2082					compute-cb@2 {
2083						compatible = "qcom,fastrpc-compute-cb";
2084						reg = <2>;
2085						iommus = <&apps_smmu 0x0542 0x0>;
2086					};
2087
2088					compute-cb@3 {
2089						compatible = "qcom,fastrpc-compute-cb";
2090						reg = <3>;
2091						iommus = <&apps_smmu 0x0543 0x0>;
2092						/* note: shared-cb = <4> in downstream */
2093					};
2094				};
2095			};
2096		};
2097
2098		remoteproc_adsp: remoteproc@30000000 {
2099			compatible = "qcom,sm8450-adsp-pas";
2100			reg = <0 0x030000000 0 0x100>;
2101
2102			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
2103					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
2104					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
2105					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
2106					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
2107			interrupt-names = "wdog", "fatal", "ready",
2108					  "handover", "stop-ack";
2109
2110			clocks = <&rpmhcc RPMH_CXO_CLK>;
2111			clock-names = "xo";
2112
2113			power-domains = <&rpmhpd SM8450_LCX>,
2114					<&rpmhpd SM8450_LMX>;
2115			power-domain-names = "lcx", "lmx";
2116
2117			memory-region = <&adsp_mem>;
2118
2119			qcom,qmp = <&aoss_qmp>;
2120
2121			qcom,smem-states = <&smp2p_adsp_out 0>;
2122			qcom,smem-state-names = "stop";
2123
2124			status = "disabled";
2125
2126			remoteproc_adsp_glink: glink-edge {
2127				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
2128							     IPCC_MPROC_SIGNAL_GLINK_QMP
2129							     IRQ_TYPE_EDGE_RISING>;
2130				mboxes = <&ipcc IPCC_CLIENT_LPASS
2131						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2132
2133				label = "lpass";
2134				qcom,remote-pid = <2>;
2135
2136				fastrpc {
2137					compatible = "qcom,fastrpc";
2138					qcom,glink-channels = "fastrpcglink-apps-dsp";
2139					label = "adsp";
2140					#address-cells = <1>;
2141					#size-cells = <0>;
2142
2143					compute-cb@3 {
2144						compatible = "qcom,fastrpc-compute-cb";
2145						reg = <3>;
2146						iommus = <&apps_smmu 0x1803 0x0>;
2147					};
2148
2149					compute-cb@4 {
2150						compatible = "qcom,fastrpc-compute-cb";
2151						reg = <4>;
2152						iommus = <&apps_smmu 0x1804 0x0>;
2153					};
2154
2155					compute-cb@5 {
2156						compatible = "qcom,fastrpc-compute-cb";
2157						reg = <5>;
2158						iommus = <&apps_smmu 0x1805 0x0>;
2159					};
2160				};
2161			};
2162		};
2163
2164		remoteproc_cdsp: remoteproc@32300000 {
2165			compatible = "qcom,sm8450-cdsp-pas";
2166			reg = <0 0x032300000 0 0x1400000>;
2167
2168			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
2169					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2170					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2171					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2172					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2173			interrupt-names = "wdog", "fatal", "ready",
2174					  "handover", "stop-ack";
2175
2176			clocks = <&rpmhcc RPMH_CXO_CLK>;
2177			clock-names = "xo";
2178
2179			power-domains = <&rpmhpd SM8450_CX>,
2180					<&rpmhpd SM8450_MXC>;
2181			power-domain-names = "cx", "mxc";
2182
2183			memory-region = <&cdsp_mem>;
2184
2185			qcom,qmp = <&aoss_qmp>;
2186
2187			qcom,smem-states = <&smp2p_cdsp_out 0>;
2188			qcom,smem-state-names = "stop";
2189
2190			status = "disabled";
2191
2192			glink-edge {
2193				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2194							     IPCC_MPROC_SIGNAL_GLINK_QMP
2195							     IRQ_TYPE_EDGE_RISING>;
2196				mboxes = <&ipcc IPCC_CLIENT_CDSP
2197						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2198
2199				label = "cdsp";
2200				qcom,remote-pid = <5>;
2201
2202				fastrpc {
2203					compatible = "qcom,fastrpc";
2204					qcom,glink-channels = "fastrpcglink-apps-dsp";
2205					label = "cdsp";
2206					#address-cells = <1>;
2207					#size-cells = <0>;
2208
2209					compute-cb@1 {
2210						compatible = "qcom,fastrpc-compute-cb";
2211						reg = <1>;
2212						iommus = <&apps_smmu 0x2161 0x0400>,
2213							 <&apps_smmu 0x1021 0x1420>;
2214					};
2215
2216					compute-cb@2 {
2217						compatible = "qcom,fastrpc-compute-cb";
2218						reg = <2>;
2219						iommus = <&apps_smmu 0x2162 0x0400>,
2220							 <&apps_smmu 0x1022 0x1420>;
2221					};
2222
2223					compute-cb@3 {
2224						compatible = "qcom,fastrpc-compute-cb";
2225						reg = <3>;
2226						iommus = <&apps_smmu 0x2163 0x0400>,
2227							 <&apps_smmu 0x1023 0x1420>;
2228					};
2229
2230					compute-cb@4 {
2231						compatible = "qcom,fastrpc-compute-cb";
2232						reg = <4>;
2233						iommus = <&apps_smmu 0x2164 0x0400>,
2234							 <&apps_smmu 0x1024 0x1420>;
2235					};
2236
2237					compute-cb@5 {
2238						compatible = "qcom,fastrpc-compute-cb";
2239						reg = <5>;
2240						iommus = <&apps_smmu 0x2165 0x0400>,
2241							 <&apps_smmu 0x1025 0x1420>;
2242					};
2243
2244					compute-cb@6 {
2245						compatible = "qcom,fastrpc-compute-cb";
2246						reg = <6>;
2247						iommus = <&apps_smmu 0x2166 0x0400>,
2248							 <&apps_smmu 0x1026 0x1420>;
2249					};
2250
2251					compute-cb@7 {
2252						compatible = "qcom,fastrpc-compute-cb";
2253						reg = <7>;
2254						iommus = <&apps_smmu 0x2167 0x0400>,
2255							 <&apps_smmu 0x1027 0x1420>;
2256					};
2257
2258					compute-cb@8 {
2259						compatible = "qcom,fastrpc-compute-cb";
2260						reg = <8>;
2261						iommus = <&apps_smmu 0x2168 0x0400>,
2262							 <&apps_smmu 0x1028 0x1420>;
2263					};
2264
2265					/* note: secure cb9 in downstream */
2266				};
2267			};
2268		};
2269
2270		remoteproc_mpss: remoteproc@4080000 {
2271			compatible = "qcom,sm8450-mpss-pas";
2272			reg = <0x0 0x04080000 0x0 0x4040>;
2273
2274			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
2275					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
2276					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
2277					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
2278					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
2279					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
2280			interrupt-names = "wdog", "fatal", "ready", "handover",
2281					  "stop-ack", "shutdown-ack";
2282
2283			clocks = <&rpmhcc RPMH_CXO_CLK>;
2284			clock-names = "xo";
2285
2286			power-domains = <&rpmhpd 0>,
2287					<&rpmhpd 12>;
2288			power-domain-names = "cx", "mss";
2289
2290			memory-region = <&mpss_mem>;
2291
2292			qcom,qmp = <&aoss_qmp>;
2293
2294			qcom,smem-states = <&smp2p_modem_out 0>;
2295			qcom,smem-state-names = "stop";
2296
2297			status = "disabled";
2298
2299			glink-edge {
2300				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2301							     IPCC_MPROC_SIGNAL_GLINK_QMP
2302							     IRQ_TYPE_EDGE_RISING>;
2303				mboxes = <&ipcc IPCC_CLIENT_MPSS
2304						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2305				label = "modem";
2306				qcom,remote-pid = <1>;
2307			};
2308		};
2309
2310		camcc: clock-controller@ade0000 {
2311			compatible = "qcom,sm8450-camcc";
2312			reg = <0 0x0ade0000 0 0x20000>;
2313			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
2314				 <&rpmhcc RPMH_CXO_CLK>,
2315				 <&rpmhcc RPMH_CXO_CLK_A>,
2316				 <&sleep_clk>;
2317			power-domains = <&rpmhpd SM8450_MMCX>;
2318			required-opps = <&rpmhpd_opp_low_svs>;
2319			#clock-cells = <1>;
2320			#reset-cells = <1>;
2321			#power-domain-cells = <1>;
2322			status = "disabled";
2323		};
2324
2325		pdc: interrupt-controller@b220000 {
2326			compatible = "qcom,sm8450-pdc", "qcom,pdc";
2327			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
2328			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
2329					  <94 609 31>, <125 63 1>, <126 716 12>;
2330			#interrupt-cells = <2>;
2331			interrupt-parent = <&intc>;
2332			interrupt-controller;
2333		};
2334
2335		tsens0: thermal-sensor@c263000 {
2336			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
2337			reg = <0 0x0c263000 0 0x1000>, /* TM */
2338			      <0 0x0c222000 0 0x1000>; /* SROT */
2339			#qcom,sensors = <16>;
2340			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
2341				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
2342			interrupt-names = "uplow", "critical";
2343			#thermal-sensor-cells = <1>;
2344		};
2345
2346		tsens1: thermal-sensor@c265000 {
2347			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
2348			reg = <0 0x0c265000 0 0x1000>, /* TM */
2349			      <0 0x0c223000 0 0x1000>; /* SROT */
2350			#qcom,sensors = <16>;
2351			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
2352				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
2353			interrupt-names = "uplow", "critical";
2354			#thermal-sensor-cells = <1>;
2355		};
2356
2357		aoss_qmp: power-controller@c300000 {
2358			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
2359			reg = <0 0x0c300000 0 0x400>;
2360			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
2361						     IRQ_TYPE_EDGE_RISING>;
2362			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
2363
2364			#clock-cells = <0>;
2365		};
2366
2367		ipcc: mailbox@ed18000 {
2368			compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
2369			reg = <0 0x0ed18000 0 0x1000>;
2370			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
2371			interrupt-controller;
2372			#interrupt-cells = <3>;
2373			#mbox-cells = <2>;
2374		};
2375
2376		tlmm: pinctrl@f100000 {
2377			compatible = "qcom,sm8450-tlmm";
2378			reg = <0 0x0f100000 0 0x300000>;
2379			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
2380			gpio-controller;
2381			#gpio-cells = <2>;
2382			interrupt-controller;
2383			#interrupt-cells = <2>;
2384			gpio-ranges = <&tlmm 0 0 211>;
2385			wakeup-parent = <&pdc>;
2386
2387			sdc2_sleep_state: sdc2-sleep-state {
2388				clk-pins {
2389					pins = "sdc2_clk";
2390					drive-strength = <2>;
2391					bias-disable;
2392				};
2393
2394				cmd-pins {
2395					pins = "sdc2_cmd";
2396					drive-strength = <2>;
2397					bias-pull-up;
2398				};
2399
2400				data-pins {
2401					pins = "sdc2_data";
2402					drive-strength = <2>;
2403					bias-pull-up;
2404				};
2405			};
2406
2407			pcie0_default_state: pcie0-default-state {
2408				perst-pins {
2409					pins = "gpio94";
2410					function = "gpio";
2411					drive-strength = <2>;
2412					bias-pull-down;
2413				};
2414
2415				clkreq-pins {
2416					pins = "gpio95";
2417					function = "pcie0_clkreqn";
2418					drive-strength = <2>;
2419					bias-pull-up;
2420				};
2421
2422				wake-pins {
2423					pins = "gpio96";
2424					function = "gpio";
2425					drive-strength = <2>;
2426					bias-pull-up;
2427				};
2428			};
2429
2430			pcie1_default_state: pcie1-default-state {
2431				perst-pins {
2432					pins = "gpio97";
2433					function = "gpio";
2434					drive-strength = <2>;
2435					bias-pull-down;
2436				};
2437
2438				clkreq-pins {
2439					pins = "gpio98";
2440					function = "pcie1_clkreqn";
2441					drive-strength = <2>;
2442					bias-pull-up;
2443				};
2444
2445				wake-pins {
2446					pins = "gpio99";
2447					function = "gpio";
2448					drive-strength = <2>;
2449					bias-pull-up;
2450				};
2451			};
2452
2453			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
2454				pins = "gpio0", "gpio1";
2455				function = "qup0";
2456			};
2457
2458			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
2459				pins = "gpio4", "gpio5";
2460				function = "qup1";
2461			};
2462
2463			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
2464				pins = "gpio8", "gpio9";
2465				function = "qup2";
2466			};
2467
2468			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
2469				pins = "gpio12", "gpio13";
2470				function = "qup3";
2471			};
2472
2473			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
2474				pins = "gpio16", "gpio17";
2475				function = "qup4";
2476			};
2477
2478			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
2479				pins = "gpio206", "gpio207";
2480				function = "qup5";
2481			};
2482
2483			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
2484				pins = "gpio20", "gpio21";
2485				function = "qup6";
2486			};
2487
2488			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
2489				pins = "gpio28", "gpio29";
2490				function = "qup8";
2491			};
2492
2493			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
2494				pins = "gpio32", "gpio33";
2495				function = "qup9";
2496			};
2497
2498			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
2499				pins = "gpio36", "gpio37";
2500				function = "qup10";
2501			};
2502
2503			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
2504				pins = "gpio40", "gpio41";
2505				function = "qup11";
2506			};
2507
2508			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
2509				pins = "gpio44", "gpio45";
2510				function = "qup12";
2511			};
2512
2513			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
2514				pins = "gpio48", "gpio49";
2515				function = "qup13";
2516				drive-strength = <2>;
2517				bias-pull-up;
2518			};
2519
2520			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
2521				pins = "gpio52", "gpio53";
2522				function = "qup14";
2523				drive-strength = <2>;
2524				bias-pull-up;
2525			};
2526
2527			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
2528				pins = "gpio56", "gpio57";
2529				function = "qup15";
2530			};
2531
2532			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
2533				pins = "gpio60", "gpio61";
2534				function = "qup16";
2535			};
2536
2537			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
2538				pins = "gpio64", "gpio65";
2539				function = "qup17";
2540			};
2541
2542			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
2543				pins = "gpio68", "gpio69";
2544				function = "qup18";
2545			};
2546
2547			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
2548				pins = "gpio72", "gpio73";
2549				function = "qup19";
2550			};
2551
2552			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
2553				pins = "gpio76", "gpio77";
2554				function = "qup20";
2555			};
2556
2557			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
2558				pins = "gpio80", "gpio81";
2559				function = "qup21";
2560			};
2561
2562			qup_spi0_cs: qup-spi0-cs-state {
2563				pins = "gpio3";
2564				function = "qup0";
2565			};
2566
2567			qup_spi0_data_clk: qup-spi0-data-clk-state {
2568				pins = "gpio0", "gpio1", "gpio2";
2569				function = "qup0";
2570			};
2571
2572			qup_spi1_cs: qup-spi1-cs-state {
2573				pins = "gpio7";
2574				function = "qup1";
2575			};
2576
2577			qup_spi1_data_clk: qup-spi1-data-clk-state {
2578				pins = "gpio4", "gpio5", "gpio6";
2579				function = "qup1";
2580			};
2581
2582			qup_spi2_cs: qup-spi2-cs-state {
2583				pins = "gpio11";
2584				function = "qup2";
2585			};
2586
2587			qup_spi2_data_clk: qup-spi2-data-clk-state {
2588				pins = "gpio8", "gpio9", "gpio10";
2589				function = "qup2";
2590			};
2591
2592			qup_spi3_cs: qup-spi3-cs-state {
2593				pins = "gpio15";
2594				function = "qup3";
2595			};
2596
2597			qup_spi3_data_clk: qup-spi3-data-clk-state {
2598				pins = "gpio12", "gpio13", "gpio14";
2599				function = "qup3";
2600			};
2601
2602			qup_spi4_cs: qup-spi4-cs-state {
2603				pins = "gpio19";
2604				function = "qup4";
2605				drive-strength = <6>;
2606				bias-disable;
2607			};
2608
2609			qup_spi4_data_clk: qup-spi4-data-clk-state {
2610				pins = "gpio16", "gpio17", "gpio18";
2611				function = "qup4";
2612			};
2613
2614			qup_spi5_cs: qup-spi5-cs-state {
2615				pins = "gpio85";
2616				function = "qup5";
2617			};
2618
2619			qup_spi5_data_clk: qup-spi5-data-clk-state {
2620				pins = "gpio206", "gpio207", "gpio84";
2621				function = "qup5";
2622			};
2623
2624			qup_spi6_cs: qup-spi6-cs-state {
2625				pins = "gpio23";
2626				function = "qup6";
2627			};
2628
2629			qup_spi6_data_clk: qup-spi6-data-clk-state {
2630				pins = "gpio20", "gpio21", "gpio22";
2631				function = "qup6";
2632			};
2633
2634			qup_spi8_cs: qup-spi8-cs-state {
2635				pins = "gpio31";
2636				function = "qup8";
2637			};
2638
2639			qup_spi8_data_clk: qup-spi8-data-clk-state {
2640				pins = "gpio28", "gpio29", "gpio30";
2641				function = "qup8";
2642			};
2643
2644			qup_spi9_cs: qup-spi9-cs-state {
2645				pins = "gpio35";
2646				function = "qup9";
2647			};
2648
2649			qup_spi9_data_clk: qup-spi9-data-clk-state {
2650				pins = "gpio32", "gpio33", "gpio34";
2651				function = "qup9";
2652			};
2653
2654			qup_spi10_cs: qup-spi10-cs-state {
2655				pins = "gpio39";
2656				function = "qup10";
2657			};
2658
2659			qup_spi10_data_clk: qup-spi10-data-clk-state {
2660				pins = "gpio36", "gpio37", "gpio38";
2661				function = "qup10";
2662			};
2663
2664			qup_spi11_cs: qup-spi11-cs-state {
2665				pins = "gpio43";
2666				function = "qup11";
2667			};
2668
2669			qup_spi11_data_clk: qup-spi11-data-clk-state {
2670				pins = "gpio40", "gpio41", "gpio42";
2671				function = "qup11";
2672			};
2673
2674			qup_spi12_cs: qup-spi12-cs-state {
2675				pins = "gpio47";
2676				function = "qup12";
2677			};
2678
2679			qup_spi12_data_clk: qup-spi12-data-clk-state {
2680				pins = "gpio44", "gpio45", "gpio46";
2681				function = "qup12";
2682			};
2683
2684			qup_spi13_cs: qup-spi13-cs-state {
2685				pins = "gpio51";
2686				function = "qup13";
2687			};
2688
2689			qup_spi13_data_clk: qup-spi13-data-clk-state {
2690				pins = "gpio48", "gpio49", "gpio50";
2691				function = "qup13";
2692			};
2693
2694			qup_spi14_cs: qup-spi14-cs-state {
2695				pins = "gpio55";
2696				function = "qup14";
2697			};
2698
2699			qup_spi14_data_clk: qup-spi14-data-clk-state {
2700				pins = "gpio52", "gpio53", "gpio54";
2701				function = "qup14";
2702			};
2703
2704			qup_spi15_cs: qup-spi15-cs-state {
2705				pins = "gpio59";
2706				function = "qup15";
2707			};
2708
2709			qup_spi15_data_clk: qup-spi15-data-clk-state {
2710				pins = "gpio56", "gpio57", "gpio58";
2711				function = "qup15";
2712			};
2713
2714			qup_spi16_cs: qup-spi16-cs-state {
2715				pins = "gpio63";
2716				function = "qup16";
2717			};
2718
2719			qup_spi16_data_clk: qup-spi16-data-clk-state {
2720				pins = "gpio60", "gpio61", "gpio62";
2721				function = "qup16";
2722			};
2723
2724			qup_spi17_cs: qup-spi17-cs-state {
2725				pins = "gpio67";
2726				function = "qup17";
2727			};
2728
2729			qup_spi17_data_clk: qup-spi17-data-clk-state {
2730				pins = "gpio64", "gpio65", "gpio66";
2731				function = "qup17";
2732			};
2733
2734			qup_spi18_cs: qup-spi18-cs-state {
2735				pins = "gpio71";
2736				function = "qup18";
2737				drive-strength = <6>;
2738				bias-disable;
2739			};
2740
2741			qup_spi18_data_clk: qup-spi18-data-clk-state {
2742				pins = "gpio68", "gpio69", "gpio70";
2743				function = "qup18";
2744				drive-strength = <6>;
2745				bias-disable;
2746			};
2747
2748			qup_spi19_cs: qup-spi19-cs-state {
2749				pins = "gpio75";
2750				function = "qup19";
2751				drive-strength = <6>;
2752				bias-disable;
2753			};
2754
2755			qup_spi19_data_clk: qup-spi19-data-clk-state {
2756				pins = "gpio72", "gpio73", "gpio74";
2757				function = "qup19";
2758				drive-strength = <6>;
2759				bias-disable;
2760			};
2761
2762			qup_spi20_cs: qup-spi20-cs-state {
2763				pins = "gpio79";
2764				function = "qup20";
2765			};
2766
2767			qup_spi20_data_clk: qup-spi20-data-clk-state {
2768				pins = "gpio76", "gpio77", "gpio78";
2769				function = "qup20";
2770			};
2771
2772			qup_spi21_cs: qup-spi21-cs-state {
2773				pins = "gpio83";
2774				function = "qup21";
2775			};
2776
2777			qup_spi21_data_clk: qup-spi21-data-clk-state {
2778				pins = "gpio80", "gpio81", "gpio82";
2779				function = "qup21";
2780			};
2781
2782			qup_uart7_rx: qup-uart7-rx-state {
2783				pins = "gpio26";
2784				function = "qup7";
2785				drive-strength = <2>;
2786				bias-disable;
2787			};
2788
2789			qup_uart7_tx: qup-uart7-tx-state {
2790				pins = "gpio27";
2791				function = "qup7";
2792				drive-strength = <2>;
2793				bias-disable;
2794			};
2795
2796			qup_uart20_default: qup-uart20-default-state {
2797				pins = "gpio76", "gpio77", "gpio78", "gpio79";
2798				function = "qup20";
2799			};
2800
2801		};
2802
2803		apps_smmu: iommu@15000000 {
2804			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
2805			reg = <0 0x15000000 0 0x100000>;
2806			#iommu-cells = <2>;
2807			#global-interrupts = <1>;
2808			interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
2809					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
2810					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
2811					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
2812					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
2813					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
2814					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
2815					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
2816					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
2817					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
2818					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
2819					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
2820					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
2821					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
2822					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
2823					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
2824					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
2825					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
2826					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
2827					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
2828					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
2829					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
2830					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
2831					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
2832					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
2833					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
2834					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
2835					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
2836					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
2837					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
2838					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
2839					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
2840					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
2841					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
2842					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
2843					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
2844					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
2845					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
2846					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
2847					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
2848					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
2849					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
2850					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
2851					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
2852					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
2853					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
2854					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
2855					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
2856					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
2857					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
2858					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
2859					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
2860					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
2861					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
2862					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
2863					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
2864					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
2865					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
2866					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
2867					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
2868					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
2869					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
2870					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
2871					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
2872					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
2873					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
2874					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
2875					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
2876					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
2877					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
2878					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
2879					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
2880					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
2881					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
2882					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
2883					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
2884					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
2885					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
2886					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
2887					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
2888					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
2889					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
2890					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
2891					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
2892					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
2893					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
2894					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
2895					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
2896					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
2897					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
2898					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
2899					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
2900					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
2901					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
2902					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
2903					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
2904					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
2905		};
2906
2907		intc: interrupt-controller@17100000 {
2908			compatible = "arm,gic-v3";
2909			#interrupt-cells = <3>;
2910			interrupt-controller;
2911			#redistributor-regions = <1>;
2912			redistributor-stride = <0x0 0x40000>;
2913			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
2914			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
2915			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
2916			#address-cells = <2>;
2917			#size-cells = <2>;
2918			ranges;
2919
2920			gic_its: msi-controller@17140000 {
2921				compatible = "arm,gic-v3-its";
2922				reg = <0x0 0x17140000 0x0 0x20000>;
2923				msi-controller;
2924				#msi-cells = <1>;
2925			};
2926		};
2927
2928		timer@17420000 {
2929			compatible = "arm,armv7-timer-mem";
2930			#address-cells = <1>;
2931			#size-cells = <1>;
2932			ranges = <0 0 0 0x20000000>;
2933			reg = <0x0 0x17420000 0x0 0x1000>;
2934			clock-frequency = <19200000>;
2935
2936			frame@17421000 {
2937				frame-number = <0>;
2938				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
2939					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
2940				reg = <0x17421000 0x1000>,
2941				      <0x17422000 0x1000>;
2942			};
2943
2944			frame@17423000 {
2945				frame-number = <1>;
2946				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
2947				reg = <0x17423000 0x1000>;
2948				status = "disabled";
2949			};
2950
2951			frame@17425000 {
2952				frame-number = <2>;
2953				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
2954				reg = <0x17425000 0x1000>;
2955				status = "disabled";
2956			};
2957
2958			frame@17427000 {
2959				frame-number = <3>;
2960				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
2961				reg = <0x17427000 0x1000>;
2962				status = "disabled";
2963			};
2964
2965			frame@17429000 {
2966				frame-number = <4>;
2967				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
2968				reg = <0x17429000 0x1000>;
2969				status = "disabled";
2970			};
2971
2972			frame@1742b000 {
2973				frame-number = <5>;
2974				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
2975				reg = <0x1742b000 0x1000>;
2976				status = "disabled";
2977			};
2978
2979			frame@1742d000 {
2980				frame-number = <6>;
2981				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
2982				reg = <0x1742d000 0x1000>;
2983				status = "disabled";
2984			};
2985		};
2986
2987		apps_rsc: rsc@17a00000 {
2988			label = "apps_rsc";
2989			compatible = "qcom,rpmh-rsc";
2990			reg = <0x0 0x17a00000 0x0 0x10000>,
2991			      <0x0 0x17a10000 0x0 0x10000>,
2992			      <0x0 0x17a20000 0x0 0x10000>,
2993			      <0x0 0x17a30000 0x0 0x10000>;
2994			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
2995			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
2996				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
2997				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
2998			qcom,tcs-offset = <0xd00>;
2999			qcom,drv-id = <2>;
3000			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
3001					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
3002
3003			apps_bcm_voter: bcm-voter {
3004				compatible = "qcom,bcm-voter";
3005			};
3006
3007			rpmhcc: clock-controller {
3008				compatible = "qcom,sm8450-rpmh-clk";
3009				#clock-cells = <1>;
3010				clock-names = "xo";
3011				clocks = <&xo_board>;
3012			};
3013
3014			rpmhpd: power-controller {
3015				compatible = "qcom,sm8450-rpmhpd";
3016				#power-domain-cells = <1>;
3017				operating-points-v2 = <&rpmhpd_opp_table>;
3018
3019				rpmhpd_opp_table: opp-table {
3020					compatible = "operating-points-v2";
3021
3022					rpmhpd_opp_ret: opp1 {
3023						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3024					};
3025
3026					rpmhpd_opp_min_svs: opp2 {
3027						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3028					};
3029
3030					rpmhpd_opp_low_svs: opp3 {
3031						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3032					};
3033
3034					rpmhpd_opp_svs: opp4 {
3035						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3036					};
3037
3038					rpmhpd_opp_svs_l1: opp5 {
3039						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3040					};
3041
3042					rpmhpd_opp_nom: opp6 {
3043						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3044					};
3045
3046					rpmhpd_opp_nom_l1: opp7 {
3047						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3048					};
3049
3050					rpmhpd_opp_nom_l2: opp8 {
3051						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3052					};
3053
3054					rpmhpd_opp_turbo: opp9 {
3055						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3056					};
3057
3058					rpmhpd_opp_turbo_l1: opp10 {
3059						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3060					};
3061				};
3062			};
3063		};
3064
3065		cpufreq_hw: cpufreq@17d91000 {
3066			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
3067			reg = <0 0x17d91000 0 0x1000>,
3068			      <0 0x17d92000 0 0x1000>,
3069			      <0 0x17d93000 0 0x1000>;
3070			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
3071			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
3072			clock-names = "xo", "alternate";
3073			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
3074				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
3075				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
3076			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
3077			#freq-domain-cells = <1>;
3078		};
3079
3080		gem_noc: interconnect@19100000 {
3081			compatible = "qcom,sm8450-gem-noc";
3082			reg = <0 0x19100000 0 0xbb800>;
3083			#interconnect-cells = <2>;
3084			qcom,bcm-voters = <&apps_bcm_voter>;
3085		};
3086
3087		system-cache-controller@19200000 {
3088			compatible = "qcom,sm8450-llcc";
3089			reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>;
3090			reg-names = "llcc_base", "llcc_broadcast_base";
3091			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
3092		};
3093
3094		ufs_mem_hc: ufshc@1d84000 {
3095			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
3096				     "jedec,ufs-2.0";
3097			reg = <0 0x01d84000 0 0x3000>,
3098			      <0 0x01d88000 0 0x8000>;
3099			reg-names = "std", "ice";
3100			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
3101			phys = <&ufs_mem_phy_lanes>;
3102			phy-names = "ufsphy";
3103			lanes-per-direction = <2>;
3104			#reset-cells = <1>;
3105			resets = <&gcc GCC_UFS_PHY_BCR>;
3106			reset-names = "rst";
3107
3108			power-domains = <&gcc UFS_PHY_GDSC>;
3109
3110			iommus = <&apps_smmu 0xe0 0x0>;
3111
3112			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
3113					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
3114			interconnect-names = "ufs-ddr", "cpu-ufs";
3115			clock-names =
3116				"core_clk",
3117				"bus_aggr_clk",
3118				"iface_clk",
3119				"core_clk_unipro",
3120				"ref_clk",
3121				"tx_lane0_sync_clk",
3122				"rx_lane0_sync_clk",
3123				"rx_lane1_sync_clk",
3124				"ice_core_clk";
3125			clocks =
3126				<&gcc GCC_UFS_PHY_AXI_CLK>,
3127				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
3128				<&gcc GCC_UFS_PHY_AHB_CLK>,
3129				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
3130				<&rpmhcc RPMH_CXO_CLK>,
3131				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
3132				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
3133				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
3134				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
3135			freq-table-hz =
3136				<75000000 300000000>,
3137				<0 0>,
3138				<0 0>,
3139				<75000000 300000000>,
3140				<75000000 300000000>,
3141				<0 0>,
3142				<0 0>,
3143				<0 0>,
3144				<75000000 300000000>;
3145			status = "disabled";
3146		};
3147
3148		ufs_mem_phy: phy@1d87000 {
3149			compatible = "qcom,sm8450-qmp-ufs-phy";
3150			reg = <0 0x01d87000 0 0x1c4>;
3151			#address-cells = <2>;
3152			#size-cells = <2>;
3153			ranges;
3154			clock-names = "ref", "ref_aux", "qref";
3155			clocks = <&rpmhcc RPMH_CXO_CLK>,
3156				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
3157				 <&gcc GCC_UFS_0_CLKREF_EN>;
3158
3159			resets = <&ufs_mem_hc 0>;
3160			reset-names = "ufsphy";
3161			status = "disabled";
3162
3163			ufs_mem_phy_lanes: phy@1d87400 {
3164				reg = <0 0x01d87400 0 0x108>,
3165				      <0 0x01d87600 0 0x1e0>,
3166				      <0 0x01d87c00 0 0x1dc>,
3167				      <0 0x01d87800 0 0x108>,
3168				      <0 0x01d87a00 0 0x1e0>;
3169				#phy-cells = <0>;
3170			};
3171		};
3172
3173		sdhc_2: sdhci@8804000 {
3174			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
3175			reg = <0 0x08804000 0 0x1000>;
3176
3177			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
3178				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
3179			interrupt-names = "hc_irq", "pwr_irq";
3180
3181			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
3182				 <&gcc GCC_SDCC2_APPS_CLK>,
3183				 <&rpmhcc RPMH_CXO_CLK>;
3184			clock-names = "iface", "core", "xo";
3185			resets = <&gcc GCC_SDCC2_BCR>;
3186			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
3187					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
3188			interconnect-names = "sdhc-ddr","cpu-sdhc";
3189			iommus = <&apps_smmu 0x4a0 0x0>;
3190			power-domains = <&rpmhpd SM8450_CX>;
3191			operating-points-v2 = <&sdhc2_opp_table>;
3192			bus-width = <4>;
3193			dma-coherent;
3194
3195			status = "disabled";
3196
3197			sdhc2_opp_table: opp-table {
3198				compatible = "operating-points-v2";
3199
3200				opp-100000000 {
3201					opp-hz = /bits/ 64 <100000000>;
3202					required-opps = <&rpmhpd_opp_low_svs>;
3203				};
3204
3205				opp-202000000 {
3206					opp-hz = /bits/ 64 <202000000>;
3207					required-opps = <&rpmhpd_opp_svs_l1>;
3208				};
3209			};
3210		};
3211
3212		usb_1: usb@a6f8800 {
3213			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
3214			reg = <0 0x0a6f8800 0 0x400>;
3215			status = "disabled";
3216			#address-cells = <2>;
3217			#size-cells = <2>;
3218			ranges;
3219
3220			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
3221				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
3222				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
3223				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
3224				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3225				 <&gcc GCC_USB3_0_CLKREF_EN>;
3226			clock-names = "cfg_noc",
3227				      "core",
3228				      "iface",
3229				      "sleep",
3230				      "mock_utmi",
3231				      "xo";
3232
3233			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3234					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
3235			assigned-clock-rates = <19200000>, <200000000>;
3236
3237			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
3238					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
3239					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
3240					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
3241			interrupt-names = "hs_phy_irq",
3242					  "ss_phy_irq",
3243					  "dm_hs_phy_irq",
3244					  "dp_hs_phy_irq";
3245
3246			power-domains = <&gcc USB30_PRIM_GDSC>;
3247
3248			resets = <&gcc GCC_USB30_PRIM_BCR>;
3249
3250			usb_1_dwc3: usb@a600000 {
3251				compatible = "snps,dwc3";
3252				reg = <0 0x0a600000 0 0xcd00>;
3253				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3254				iommus = <&apps_smmu 0x0 0x0>;
3255				snps,dis_u2_susphy_quirk;
3256				snps,dis_enblslpm_quirk;
3257				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
3258				phy-names = "usb2-phy", "usb3-phy";
3259			};
3260		};
3261
3262		nsp_noc: interconnect@320c0000 {
3263			compatible = "qcom,sm8450-nsp-noc";
3264			reg = <0 0x320c0000 0 0x10000>;
3265			#interconnect-cells = <2>;
3266			qcom,bcm-voters = <&apps_bcm_voter>;
3267		};
3268
3269		lpass_ag_noc: interconnect@3c40000 {
3270			compatible = "qcom,sm8450-lpass-ag-noc";
3271			reg = <0 0x3c40000 0 0x17200>;
3272			#interconnect-cells = <2>;
3273			qcom,bcm-voters = <&apps_bcm_voter>;
3274		};
3275	};
3276
3277	thermal-zones {
3278		aoss0-thermal {
3279			polling-delay-passive = <0>;
3280			polling-delay = <0>;
3281			thermal-sensors = <&tsens0 0>;
3282
3283			trips {
3284				thermal-engine-config {
3285					temperature = <125000>;
3286					hysteresis = <1000>;
3287					type = "passive";
3288				};
3289
3290				reset-mon-cfg {
3291					temperature = <115000>;
3292					hysteresis = <5000>;
3293					type = "passive";
3294				};
3295			};
3296		};
3297
3298		cpuss0-thermal {
3299			polling-delay-passive = <0>;
3300			polling-delay = <0>;
3301			thermal-sensors = <&tsens0 1>;
3302
3303			trips {
3304				thermal-engine-config {
3305					temperature = <125000>;
3306					hysteresis = <1000>;
3307					type = "passive";
3308				};
3309
3310				reset-mon-cfg {
3311					temperature = <115000>;
3312					hysteresis = <5000>;
3313					type = "passive";
3314				};
3315			};
3316		};
3317
3318		cpuss1-thermal {
3319			polling-delay-passive = <0>;
3320			polling-delay = <0>;
3321			thermal-sensors = <&tsens0 2>;
3322
3323			trips {
3324				thermal-engine-config {
3325					temperature = <125000>;
3326					hysteresis = <1000>;
3327					type = "passive";
3328				};
3329
3330				reset-mon-cfg {
3331					temperature = <115000>;
3332					hysteresis = <5000>;
3333					type = "passive";
3334				};
3335			};
3336		};
3337
3338		cpuss3-thermal {
3339			polling-delay-passive = <0>;
3340			polling-delay = <0>;
3341			thermal-sensors = <&tsens0 3>;
3342
3343			trips {
3344				thermal-engine-config {
3345					temperature = <125000>;
3346					hysteresis = <1000>;
3347					type = "passive";
3348				};
3349
3350				reset-mon-cfg {
3351					temperature = <115000>;
3352					hysteresis = <5000>;
3353					type = "passive";
3354				};
3355			};
3356		};
3357
3358		cpuss4-thermal {
3359			polling-delay-passive = <0>;
3360			polling-delay = <0>;
3361			thermal-sensors = <&tsens0 4>;
3362
3363			trips {
3364				thermal-engine-config {
3365					temperature = <125000>;
3366					hysteresis = <1000>;
3367					type = "passive";
3368				};
3369
3370				reset-mon-cfg {
3371					temperature = <115000>;
3372					hysteresis = <5000>;
3373					type = "passive";
3374				};
3375			};
3376		};
3377
3378		cpu4-top-thermal {
3379			polling-delay-passive = <0>;
3380			polling-delay = <0>;
3381			thermal-sensors = <&tsens0 5>;
3382
3383			trips {
3384				cpu4_top_alert0: trip-point0 {
3385					temperature = <90000>;
3386					hysteresis = <2000>;
3387					type = "passive";
3388				};
3389
3390				cpu4_top_alert1: trip-point1 {
3391					temperature = <95000>;
3392					hysteresis = <2000>;
3393					type = "passive";
3394				};
3395
3396				cpu4_top_crit: cpu_crit {
3397					temperature = <110000>;
3398					hysteresis = <1000>;
3399					type = "critical";
3400				};
3401			};
3402		};
3403
3404		cpu4-bottom-thermal {
3405			polling-delay-passive = <0>;
3406			polling-delay = <0>;
3407			thermal-sensors = <&tsens0 6>;
3408
3409			trips {
3410				cpu4_bottom_alert0: trip-point0 {
3411					temperature = <90000>;
3412					hysteresis = <2000>;
3413					type = "passive";
3414				};
3415
3416				cpu4_bottom_alert1: trip-point1 {
3417					temperature = <95000>;
3418					hysteresis = <2000>;
3419					type = "passive";
3420				};
3421
3422				cpu4_bottom_crit: cpu_crit {
3423					temperature = <110000>;
3424					hysteresis = <1000>;
3425					type = "critical";
3426				};
3427			};
3428		};
3429
3430		cpu5-top-thermal {
3431			polling-delay-passive = <0>;
3432			polling-delay = <0>;
3433			thermal-sensors = <&tsens0 7>;
3434
3435			trips {
3436				cpu5_top_alert0: trip-point0 {
3437					temperature = <90000>;
3438					hysteresis = <2000>;
3439					type = "passive";
3440				};
3441
3442				cpu5_top_alert1: trip-point1 {
3443					temperature = <95000>;
3444					hysteresis = <2000>;
3445					type = "passive";
3446				};
3447
3448				cpu5_top_crit: cpu_crit {
3449					temperature = <110000>;
3450					hysteresis = <1000>;
3451					type = "critical";
3452				};
3453			};
3454		};
3455
3456		cpu5-bottom-thermal {
3457			polling-delay-passive = <0>;
3458			polling-delay = <0>;
3459			thermal-sensors = <&tsens0 8>;
3460
3461			trips {
3462				cpu5_bottom_alert0: trip-point0 {
3463					temperature = <90000>;
3464					hysteresis = <2000>;
3465					type = "passive";
3466				};
3467
3468				cpu5_bottom_alert1: trip-point1 {
3469					temperature = <95000>;
3470					hysteresis = <2000>;
3471					type = "passive";
3472				};
3473
3474				cpu5_bottom_crit: cpu_crit {
3475					temperature = <110000>;
3476					hysteresis = <1000>;
3477					type = "critical";
3478				};
3479			};
3480		};
3481
3482		cpu6-top-thermal {
3483			polling-delay-passive = <0>;
3484			polling-delay = <0>;
3485			thermal-sensors = <&tsens0 9>;
3486
3487			trips {
3488				cpu6_top_alert0: trip-point0 {
3489					temperature = <90000>;
3490					hysteresis = <2000>;
3491					type = "passive";
3492				};
3493
3494				cpu6_top_alert1: trip-point1 {
3495					temperature = <95000>;
3496					hysteresis = <2000>;
3497					type = "passive";
3498				};
3499
3500				cpu6_top_crit: cpu_crit {
3501					temperature = <110000>;
3502					hysteresis = <1000>;
3503					type = "critical";
3504				};
3505			};
3506		};
3507
3508		cpu6-bottom-thermal {
3509			polling-delay-passive = <0>;
3510			polling-delay = <0>;
3511			thermal-sensors = <&tsens0 10>;
3512
3513			trips {
3514				cpu6_bottom_alert0: trip-point0 {
3515					temperature = <90000>;
3516					hysteresis = <2000>;
3517					type = "passive";
3518				};
3519
3520				cpu6_bottom_alert1: trip-point1 {
3521					temperature = <95000>;
3522					hysteresis = <2000>;
3523					type = "passive";
3524				};
3525
3526				cpu6_bottom_crit: cpu_crit {
3527					temperature = <110000>;
3528					hysteresis = <1000>;
3529					type = "critical";
3530				};
3531			};
3532		};
3533
3534		cpu7-top-thermal {
3535			polling-delay-passive = <0>;
3536			polling-delay = <0>;
3537			thermal-sensors = <&tsens0 11>;
3538
3539			trips {
3540				cpu7_top_alert0: trip-point0 {
3541					temperature = <90000>;
3542					hysteresis = <2000>;
3543					type = "passive";
3544				};
3545
3546				cpu7_top_alert1: trip-point1 {
3547					temperature = <95000>;
3548					hysteresis = <2000>;
3549					type = "passive";
3550				};
3551
3552				cpu7_top_crit: cpu_crit {
3553					temperature = <110000>;
3554					hysteresis = <1000>;
3555					type = "critical";
3556				};
3557			};
3558		};
3559
3560		cpu7-middle-thermal {
3561			polling-delay-passive = <0>;
3562			polling-delay = <0>;
3563			thermal-sensors = <&tsens0 12>;
3564
3565			trips {
3566				cpu7_middle_alert0: trip-point0 {
3567					temperature = <90000>;
3568					hysteresis = <2000>;
3569					type = "passive";
3570				};
3571
3572				cpu7_middle_alert1: trip-point1 {
3573					temperature = <95000>;
3574					hysteresis = <2000>;
3575					type = "passive";
3576				};
3577
3578				cpu7_middle_crit: cpu_crit {
3579					temperature = <110000>;
3580					hysteresis = <1000>;
3581					type = "critical";
3582				};
3583			};
3584		};
3585
3586		cpu7-bottom-thermal {
3587			polling-delay-passive = <0>;
3588			polling-delay = <0>;
3589			thermal-sensors = <&tsens0 13>;
3590
3591			trips {
3592				cpu7_bottom_alert0: trip-point0 {
3593					temperature = <90000>;
3594					hysteresis = <2000>;
3595					type = "passive";
3596				};
3597
3598				cpu7_bottom_alert1: trip-point1 {
3599					temperature = <95000>;
3600					hysteresis = <2000>;
3601					type = "passive";
3602				};
3603
3604				cpu7_bottom_crit: cpu_crit {
3605					temperature = <110000>;
3606					hysteresis = <1000>;
3607					type = "critical";
3608				};
3609			};
3610		};
3611
3612		gpu-top-thermal {
3613			polling-delay-passive = <10>;
3614			polling-delay = <0>;
3615			thermal-sensors = <&tsens0 14>;
3616
3617			trips {
3618				thermal-engine-config {
3619					temperature = <125000>;
3620					hysteresis = <1000>;
3621					type = "passive";
3622				};
3623
3624				thermal-hal-config {
3625					temperature = <125000>;
3626					hysteresis = <1000>;
3627					type = "passive";
3628				};
3629
3630				reset-mon-cfg {
3631					temperature = <115000>;
3632					hysteresis = <5000>;
3633					type = "passive";
3634				};
3635
3636				gpu0_tj_cfg: tj_cfg {
3637					temperature = <95000>;
3638					hysteresis = <5000>;
3639					type = "passive";
3640				};
3641			};
3642		};
3643
3644		gpu-bottom-thermal {
3645			polling-delay-passive = <10>;
3646			polling-delay = <0>;
3647			thermal-sensors = <&tsens0 15>;
3648
3649			trips {
3650				thermal-engine-config {
3651					temperature = <125000>;
3652					hysteresis = <1000>;
3653					type = "passive";
3654				};
3655
3656				thermal-hal-config {
3657					temperature = <125000>;
3658					hysteresis = <1000>;
3659					type = "passive";
3660				};
3661
3662				reset-mon-cfg {
3663					temperature = <115000>;
3664					hysteresis = <5000>;
3665					type = "passive";
3666				};
3667
3668				gpu1_tj_cfg: tj_cfg {
3669					temperature = <95000>;
3670					hysteresis = <5000>;
3671					type = "passive";
3672				};
3673			};
3674		};
3675
3676		aoss1-thermal {
3677			polling-delay-passive = <0>;
3678			polling-delay = <0>;
3679			thermal-sensors = <&tsens1 0>;
3680
3681			trips {
3682				thermal-engine-config {
3683					temperature = <125000>;
3684					hysteresis = <1000>;
3685					type = "passive";
3686				};
3687
3688				reset-mon-cfg {
3689					temperature = <115000>;
3690					hysteresis = <5000>;
3691					type = "passive";
3692				};
3693			};
3694		};
3695
3696		cpu0-thermal {
3697			polling-delay-passive = <0>;
3698			polling-delay = <0>;
3699			thermal-sensors = <&tsens1 1>;
3700
3701			trips {
3702				cpu0_alert0: trip-point0 {
3703					temperature = <90000>;
3704					hysteresis = <2000>;
3705					type = "passive";
3706				};
3707
3708				cpu0_alert1: trip-point1 {
3709					temperature = <95000>;
3710					hysteresis = <2000>;
3711					type = "passive";
3712				};
3713
3714				cpu0_crit: cpu_crit {
3715					temperature = <110000>;
3716					hysteresis = <1000>;
3717					type = "critical";
3718				};
3719			};
3720		};
3721
3722		cpu1-thermal {
3723			polling-delay-passive = <0>;
3724			polling-delay = <0>;
3725			thermal-sensors = <&tsens1 2>;
3726
3727			trips {
3728				cpu1_alert0: trip-point0 {
3729					temperature = <90000>;
3730					hysteresis = <2000>;
3731					type = "passive";
3732				};
3733
3734				cpu1_alert1: trip-point1 {
3735					temperature = <95000>;
3736					hysteresis = <2000>;
3737					type = "passive";
3738				};
3739
3740				cpu1_crit: cpu_crit {
3741					temperature = <110000>;
3742					hysteresis = <1000>;
3743					type = "critical";
3744				};
3745			};
3746		};
3747
3748		cpu2-thermal {
3749			polling-delay-passive = <0>;
3750			polling-delay = <0>;
3751			thermal-sensors = <&tsens1 3>;
3752
3753			trips {
3754				cpu2_alert0: trip-point0 {
3755					temperature = <90000>;
3756					hysteresis = <2000>;
3757					type = "passive";
3758				};
3759
3760				cpu2_alert1: trip-point1 {
3761					temperature = <95000>;
3762					hysteresis = <2000>;
3763					type = "passive";
3764				};
3765
3766				cpu2_crit: cpu_crit {
3767					temperature = <110000>;
3768					hysteresis = <1000>;
3769					type = "critical";
3770				};
3771			};
3772		};
3773
3774		cpu3-thermal {
3775			polling-delay-passive = <0>;
3776			polling-delay = <0>;
3777			thermal-sensors = <&tsens1 4>;
3778
3779			trips {
3780				cpu3_alert0: trip-point0 {
3781					temperature = <90000>;
3782					hysteresis = <2000>;
3783					type = "passive";
3784				};
3785
3786				cpu3_alert1: trip-point1 {
3787					temperature = <95000>;
3788					hysteresis = <2000>;
3789					type = "passive";
3790				};
3791
3792				cpu3_crit: cpu_crit {
3793					temperature = <110000>;
3794					hysteresis = <1000>;
3795					type = "critical";
3796				};
3797			};
3798		};
3799
3800		cdsp0-thermal {
3801			polling-delay-passive = <10>;
3802			polling-delay = <0>;
3803			thermal-sensors = <&tsens1 5>;
3804
3805			trips {
3806				thermal-engine-config {
3807					temperature = <125000>;
3808					hysteresis = <1000>;
3809					type = "passive";
3810				};
3811
3812				thermal-hal-config {
3813					temperature = <125000>;
3814					hysteresis = <1000>;
3815					type = "passive";
3816				};
3817
3818				reset-mon-cfg {
3819					temperature = <115000>;
3820					hysteresis = <5000>;
3821					type = "passive";
3822				};
3823
3824				cdsp_0_config: junction-config {
3825					temperature = <95000>;
3826					hysteresis = <5000>;
3827					type = "passive";
3828				};
3829			};
3830		};
3831
3832		cdsp1-thermal {
3833			polling-delay-passive = <10>;
3834			polling-delay = <0>;
3835			thermal-sensors = <&tsens1 6>;
3836
3837			trips {
3838				thermal-engine-config {
3839					temperature = <125000>;
3840					hysteresis = <1000>;
3841					type = "passive";
3842				};
3843
3844				thermal-hal-config {
3845					temperature = <125000>;
3846					hysteresis = <1000>;
3847					type = "passive";
3848				};
3849
3850				reset-mon-cfg {
3851					temperature = <115000>;
3852					hysteresis = <5000>;
3853					type = "passive";
3854				};
3855
3856				cdsp_1_config: junction-config {
3857					temperature = <95000>;
3858					hysteresis = <5000>;
3859					type = "passive";
3860				};
3861			};
3862		};
3863
3864		cdsp2-thermal {
3865			polling-delay-passive = <10>;
3866			polling-delay = <0>;
3867			thermal-sensors = <&tsens1 7>;
3868
3869			trips {
3870				thermal-engine-config {
3871					temperature = <125000>;
3872					hysteresis = <1000>;
3873					type = "passive";
3874				};
3875
3876				thermal-hal-config {
3877					temperature = <125000>;
3878					hysteresis = <1000>;
3879					type = "passive";
3880				};
3881
3882				reset-mon-cfg {
3883					temperature = <115000>;
3884					hysteresis = <5000>;
3885					type = "passive";
3886				};
3887
3888				cdsp_2_config: junction-config {
3889					temperature = <95000>;
3890					hysteresis = <5000>;
3891					type = "passive";
3892				};
3893			};
3894		};
3895
3896		video-thermal {
3897			polling-delay-passive = <0>;
3898			polling-delay = <0>;
3899			thermal-sensors = <&tsens1 8>;
3900
3901			trips {
3902				thermal-engine-config {
3903					temperature = <125000>;
3904					hysteresis = <1000>;
3905					type = "passive";
3906				};
3907
3908				reset-mon-cfg {
3909					temperature = <115000>;
3910					hysteresis = <5000>;
3911					type = "passive";
3912				};
3913			};
3914		};
3915
3916		mem-thermal {
3917			polling-delay-passive = <10>;
3918			polling-delay = <0>;
3919			thermal-sensors = <&tsens1 9>;
3920
3921			trips {
3922				thermal-engine-config {
3923					temperature = <125000>;
3924					hysteresis = <1000>;
3925					type = "passive";
3926				};
3927
3928				ddr_config0: ddr0-config {
3929					temperature = <90000>;
3930					hysteresis = <5000>;
3931					type = "passive";
3932				};
3933
3934				reset-mon-cfg {
3935					temperature = <115000>;
3936					hysteresis = <5000>;
3937					type = "passive";
3938				};
3939			};
3940		};
3941
3942		modem0-thermal {
3943			polling-delay-passive = <0>;
3944			polling-delay = <0>;
3945			thermal-sensors = <&tsens1 10>;
3946
3947			trips {
3948				thermal-engine-config {
3949					temperature = <125000>;
3950					hysteresis = <1000>;
3951					type = "passive";
3952				};
3953
3954				mdmss0_config0: mdmss0-config0 {
3955					temperature = <102000>;
3956					hysteresis = <3000>;
3957					type = "passive";
3958				};
3959
3960				mdmss0_config1: mdmss0-config1 {
3961					temperature = <105000>;
3962					hysteresis = <3000>;
3963					type = "passive";
3964				};
3965
3966				reset-mon-cfg {
3967					temperature = <115000>;
3968					hysteresis = <5000>;
3969					type = "passive";
3970				};
3971			};
3972		};
3973
3974		modem1-thermal {
3975			polling-delay-passive = <0>;
3976			polling-delay = <0>;
3977			thermal-sensors = <&tsens1 11>;
3978
3979			trips {
3980				thermal-engine-config {
3981					temperature = <125000>;
3982					hysteresis = <1000>;
3983					type = "passive";
3984				};
3985
3986				mdmss1_config0: mdmss1-config0 {
3987					temperature = <102000>;
3988					hysteresis = <3000>;
3989					type = "passive";
3990				};
3991
3992				mdmss1_config1: mdmss1-config1 {
3993					temperature = <105000>;
3994					hysteresis = <3000>;
3995					type = "passive";
3996				};
3997
3998				reset-mon-cfg {
3999					temperature = <115000>;
4000					hysteresis = <5000>;
4001					type = "passive";
4002				};
4003			};
4004		};
4005
4006		modem2-thermal {
4007			polling-delay-passive = <0>;
4008			polling-delay = <0>;
4009			thermal-sensors = <&tsens1 12>;
4010
4011			trips {
4012				thermal-engine-config {
4013					temperature = <125000>;
4014					hysteresis = <1000>;
4015					type = "passive";
4016				};
4017
4018				mdmss2_config0: mdmss2-config0 {
4019					temperature = <102000>;
4020					hysteresis = <3000>;
4021					type = "passive";
4022				};
4023
4024				mdmss2_config1: mdmss2-config1 {
4025					temperature = <105000>;
4026					hysteresis = <3000>;
4027					type = "passive";
4028				};
4029
4030				reset-mon-cfg {
4031					temperature = <115000>;
4032					hysteresis = <5000>;
4033					type = "passive";
4034				};
4035			};
4036		};
4037
4038		modem3-thermal {
4039			polling-delay-passive = <0>;
4040			polling-delay = <0>;
4041			thermal-sensors = <&tsens1 13>;
4042
4043			trips {
4044				thermal-engine-config {
4045					temperature = <125000>;
4046					hysteresis = <1000>;
4047					type = "passive";
4048				};
4049
4050				mdmss3_config0: mdmss3-config0 {
4051					temperature = <102000>;
4052					hysteresis = <3000>;
4053					type = "passive";
4054				};
4055
4056				mdmss3_config1: mdmss3-config1 {
4057					temperature = <105000>;
4058					hysteresis = <3000>;
4059					type = "passive";
4060				};
4061
4062				reset-mon-cfg {
4063					temperature = <115000>;
4064					hysteresis = <5000>;
4065					type = "passive";
4066				};
4067			};
4068		};
4069
4070		camera0-thermal {
4071			polling-delay-passive = <0>;
4072			polling-delay = <0>;
4073			thermal-sensors = <&tsens1 14>;
4074
4075			trips {
4076				thermal-engine-config {
4077					temperature = <125000>;
4078					hysteresis = <1000>;
4079					type = "passive";
4080				};
4081
4082				reset-mon-cfg {
4083					temperature = <115000>;
4084					hysteresis = <5000>;
4085					type = "passive";
4086				};
4087			};
4088		};
4089
4090		camera1-thermal {
4091			polling-delay-passive = <0>;
4092			polling-delay = <0>;
4093			thermal-sensors = <&tsens1 15>;
4094
4095			trips {
4096				thermal-engine-config {
4097					temperature = <125000>;
4098					hysteresis = <1000>;
4099					type = "passive";
4100				};
4101
4102				reset-mon-cfg {
4103					temperature = <115000>;
4104					hysteresis = <5000>;
4105					type = "passive";
4106				};
4107			};
4108		};
4109	};
4110
4111	timer {
4112		compatible = "arm,armv8-timer";
4113		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4114			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4115			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4116			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
4117		clock-frequency = <19200000>;
4118	};
4119};
4120