xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sm8450.dtsi (revision 80d0624d)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Linaro Limited
4 */
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/qcom,gcc-sm8450.h>
8#include <dt-bindings/clock/qcom,rpmh.h>
9#include <dt-bindings/clock/qcom,sm8450-camcc.h>
10#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
11#include <dt-bindings/clock/qcom,sm8450-videocc.h>
12#include <dt-bindings/dma/qcom-gpi.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/mailbox/qcom-ipcc.h>
15#include <dt-bindings/phy/phy-qcom-qmp.h>
16#include <dt-bindings/power/qcom,rpmhpd.h>
17#include <dt-bindings/power/qcom-rpmpd.h>
18#include <dt-bindings/interconnect/qcom,icc.h>
19#include <dt-bindings/interconnect/qcom,sm8450.h>
20#include <dt-bindings/soc/qcom,gpr.h>
21#include <dt-bindings/soc/qcom,rpmh-rsc.h>
22#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
23#include <dt-bindings/thermal/thermal.h>
24
25/ {
26	interrupt-parent = <&intc>;
27
28	#address-cells = <2>;
29	#size-cells = <2>;
30
31	chosen { };
32
33	clocks {
34		xo_board: xo-board {
35			compatible = "fixed-clock";
36			#clock-cells = <0>;
37			clock-frequency = <76800000>;
38		};
39
40		sleep_clk: sleep-clk {
41			compatible = "fixed-clock";
42			#clock-cells = <0>;
43			clock-frequency = <32000>;
44		};
45	};
46
47	cpus {
48		#address-cells = <2>;
49		#size-cells = <0>;
50
51		CPU0: cpu@0 {
52			device_type = "cpu";
53			compatible = "qcom,kryo780";
54			reg = <0x0 0x0>;
55			enable-method = "psci";
56			next-level-cache = <&L2_0>;
57			power-domains = <&CPU_PD0>;
58			power-domain-names = "psci";
59			qcom,freq-domain = <&cpufreq_hw 0>;
60			#cooling-cells = <2>;
61			clocks = <&cpufreq_hw 0>;
62			L2_0: l2-cache {
63				compatible = "cache";
64				cache-level = <2>;
65				cache-unified;
66				next-level-cache = <&L3_0>;
67				L3_0: l3-cache {
68					compatible = "cache";
69					cache-level = <3>;
70					cache-unified;
71				};
72			};
73		};
74
75		CPU1: cpu@100 {
76			device_type = "cpu";
77			compatible = "qcom,kryo780";
78			reg = <0x0 0x100>;
79			enable-method = "psci";
80			next-level-cache = <&L2_100>;
81			power-domains = <&CPU_PD1>;
82			power-domain-names = "psci";
83			qcom,freq-domain = <&cpufreq_hw 0>;
84			#cooling-cells = <2>;
85			clocks = <&cpufreq_hw 0>;
86			L2_100: l2-cache {
87				compatible = "cache";
88				cache-level = <2>;
89				cache-unified;
90				next-level-cache = <&L3_0>;
91			};
92		};
93
94		CPU2: cpu@200 {
95			device_type = "cpu";
96			compatible = "qcom,kryo780";
97			reg = <0x0 0x200>;
98			enable-method = "psci";
99			next-level-cache = <&L2_200>;
100			power-domains = <&CPU_PD2>;
101			power-domain-names = "psci";
102			qcom,freq-domain = <&cpufreq_hw 0>;
103			#cooling-cells = <2>;
104			clocks = <&cpufreq_hw 0>;
105			L2_200: l2-cache {
106				compatible = "cache";
107				cache-level = <2>;
108				cache-unified;
109				next-level-cache = <&L3_0>;
110			};
111		};
112
113		CPU3: cpu@300 {
114			device_type = "cpu";
115			compatible = "qcom,kryo780";
116			reg = <0x0 0x300>;
117			enable-method = "psci";
118			next-level-cache = <&L2_300>;
119			power-domains = <&CPU_PD3>;
120			power-domain-names = "psci";
121			qcom,freq-domain = <&cpufreq_hw 0>;
122			#cooling-cells = <2>;
123			clocks = <&cpufreq_hw 0>;
124			L2_300: l2-cache {
125				compatible = "cache";
126				cache-level = <2>;
127				cache-unified;
128				next-level-cache = <&L3_0>;
129			};
130		};
131
132		CPU4: cpu@400 {
133			device_type = "cpu";
134			compatible = "qcom,kryo780";
135			reg = <0x0 0x400>;
136			enable-method = "psci";
137			next-level-cache = <&L2_400>;
138			power-domains = <&CPU_PD4>;
139			power-domain-names = "psci";
140			qcom,freq-domain = <&cpufreq_hw 1>;
141			#cooling-cells = <2>;
142			clocks = <&cpufreq_hw 1>;
143			L2_400: l2-cache {
144				compatible = "cache";
145				cache-level = <2>;
146				cache-unified;
147				next-level-cache = <&L3_0>;
148			};
149		};
150
151		CPU5: cpu@500 {
152			device_type = "cpu";
153			compatible = "qcom,kryo780";
154			reg = <0x0 0x500>;
155			enable-method = "psci";
156			next-level-cache = <&L2_500>;
157			power-domains = <&CPU_PD5>;
158			power-domain-names = "psci";
159			qcom,freq-domain = <&cpufreq_hw 1>;
160			#cooling-cells = <2>;
161			clocks = <&cpufreq_hw 1>;
162			L2_500: l2-cache {
163				compatible = "cache";
164				cache-level = <2>;
165				cache-unified;
166				next-level-cache = <&L3_0>;
167			};
168		};
169
170		CPU6: cpu@600 {
171			device_type = "cpu";
172			compatible = "qcom,kryo780";
173			reg = <0x0 0x600>;
174			enable-method = "psci";
175			next-level-cache = <&L2_600>;
176			power-domains = <&CPU_PD6>;
177			power-domain-names = "psci";
178			qcom,freq-domain = <&cpufreq_hw 1>;
179			#cooling-cells = <2>;
180			clocks = <&cpufreq_hw 1>;
181			L2_600: l2-cache {
182				compatible = "cache";
183				cache-level = <2>;
184				cache-unified;
185				next-level-cache = <&L3_0>;
186			};
187		};
188
189		CPU7: cpu@700 {
190			device_type = "cpu";
191			compatible = "qcom,kryo780";
192			reg = <0x0 0x700>;
193			enable-method = "psci";
194			next-level-cache = <&L2_700>;
195			power-domains = <&CPU_PD7>;
196			power-domain-names = "psci";
197			qcom,freq-domain = <&cpufreq_hw 2>;
198			#cooling-cells = <2>;
199			clocks = <&cpufreq_hw 2>;
200			L2_700: l2-cache {
201				compatible = "cache";
202				cache-level = <2>;
203				cache-unified;
204				next-level-cache = <&L3_0>;
205			};
206		};
207
208		cpu-map {
209			cluster0 {
210				core0 {
211					cpu = <&CPU0>;
212				};
213
214				core1 {
215					cpu = <&CPU1>;
216				};
217
218				core2 {
219					cpu = <&CPU2>;
220				};
221
222				core3 {
223					cpu = <&CPU3>;
224				};
225
226				core4 {
227					cpu = <&CPU4>;
228				};
229
230				core5 {
231					cpu = <&CPU5>;
232				};
233
234				core6 {
235					cpu = <&CPU6>;
236				};
237
238				core7 {
239					cpu = <&CPU7>;
240				};
241			};
242		};
243
244		idle-states {
245			entry-method = "psci";
246
247			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
248				compatible = "arm,idle-state";
249				idle-state-name = "silver-rail-power-collapse";
250				arm,psci-suspend-param = <0x40000004>;
251				entry-latency-us = <800>;
252				exit-latency-us = <750>;
253				min-residency-us = <4090>;
254				local-timer-stop;
255			};
256
257			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
258				compatible = "arm,idle-state";
259				idle-state-name = "gold-rail-power-collapse";
260				arm,psci-suspend-param = <0x40000004>;
261				entry-latency-us = <600>;
262				exit-latency-us = <1550>;
263				min-residency-us = <4791>;
264				local-timer-stop;
265			};
266		};
267
268		domain-idle-states {
269			CLUSTER_SLEEP_0: cluster-sleep-0 {
270				compatible = "domain-idle-state";
271				arm,psci-suspend-param = <0x41000044>;
272				entry-latency-us = <1050>;
273				exit-latency-us = <2500>;
274				min-residency-us = <5309>;
275			};
276
277			CLUSTER_SLEEP_1: cluster-sleep-1 {
278				compatible = "domain-idle-state";
279				arm,psci-suspend-param = <0x4100c344>;
280				entry-latency-us = <2700>;
281				exit-latency-us = <3500>;
282				min-residency-us = <13959>;
283			};
284		};
285	};
286
287	firmware {
288		scm: scm {
289			compatible = "qcom,scm-sm8450", "qcom,scm";
290			qcom,dload-mode = <&tcsr 0x13000>;
291			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
292			#reset-cells = <1>;
293		};
294	};
295
296	clk_virt: interconnect-0 {
297		compatible = "qcom,sm8450-clk-virt";
298		#interconnect-cells = <2>;
299		qcom,bcm-voters = <&apps_bcm_voter>;
300	};
301
302	mc_virt: interconnect-1 {
303		compatible = "qcom,sm8450-mc-virt";
304		#interconnect-cells = <2>;
305		qcom,bcm-voters = <&apps_bcm_voter>;
306	};
307
308	memory@a0000000 {
309		device_type = "memory";
310		/* We expect the bootloader to fill in the size */
311		reg = <0x0 0xa0000000 0x0 0x0>;
312	};
313
314	pmu {
315		compatible = "arm,armv8-pmuv3";
316		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
317	};
318
319	psci {
320		compatible = "arm,psci-1.0";
321		method = "smc";
322
323		CPU_PD0: power-domain-cpu0 {
324			#power-domain-cells = <0>;
325			power-domains = <&CLUSTER_PD>;
326			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
327		};
328
329		CPU_PD1: power-domain-cpu1 {
330			#power-domain-cells = <0>;
331			power-domains = <&CLUSTER_PD>;
332			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
333		};
334
335		CPU_PD2: power-domain-cpu2 {
336			#power-domain-cells = <0>;
337			power-domains = <&CLUSTER_PD>;
338			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
339		};
340
341		CPU_PD3: power-domain-cpu3 {
342			#power-domain-cells = <0>;
343			power-domains = <&CLUSTER_PD>;
344			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
345		};
346
347		CPU_PD4: power-domain-cpu4 {
348			#power-domain-cells = <0>;
349			power-domains = <&CLUSTER_PD>;
350			domain-idle-states = <&BIG_CPU_SLEEP_0>;
351		};
352
353		CPU_PD5: power-domain-cpu5 {
354			#power-domain-cells = <0>;
355			power-domains = <&CLUSTER_PD>;
356			domain-idle-states = <&BIG_CPU_SLEEP_0>;
357		};
358
359		CPU_PD6: power-domain-cpu6 {
360			#power-domain-cells = <0>;
361			power-domains = <&CLUSTER_PD>;
362			domain-idle-states = <&BIG_CPU_SLEEP_0>;
363		};
364
365		CPU_PD7: power-domain-cpu7 {
366			#power-domain-cells = <0>;
367			power-domains = <&CLUSTER_PD>;
368			domain-idle-states = <&BIG_CPU_SLEEP_0>;
369		};
370
371		CLUSTER_PD: power-domain-cpu-cluster0 {
372			#power-domain-cells = <0>;
373			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
374		};
375	};
376
377	qup_opp_table_100mhz: opp-table-qup {
378		compatible = "operating-points-v2";
379
380		opp-50000000 {
381			opp-hz = /bits/ 64 <50000000>;
382			required-opps = <&rpmhpd_opp_min_svs>;
383		};
384
385		opp-75000000 {
386			opp-hz = /bits/ 64 <75000000>;
387			required-opps = <&rpmhpd_opp_low_svs>;
388		};
389
390		opp-100000000 {
391			opp-hz = /bits/ 64 <100000000>;
392			required-opps = <&rpmhpd_opp_svs>;
393		};
394	};
395
396	reserved_memory: reserved-memory {
397		#address-cells = <2>;
398		#size-cells = <2>;
399		ranges;
400
401		hyp_mem: memory@80000000 {
402			reg = <0x0 0x80000000 0x0 0x600000>;
403			no-map;
404		};
405
406		xbl_dt_log_mem: memory@80600000 {
407			reg = <0x0 0x80600000 0x0 0x40000>;
408			no-map;
409		};
410
411		xbl_ramdump_mem: memory@80640000 {
412			reg = <0x0 0x80640000 0x0 0x180000>;
413			no-map;
414		};
415
416		xbl_sc_mem: memory@807c0000 {
417			reg = <0x0 0x807c0000 0x0 0x40000>;
418			no-map;
419		};
420
421		aop_image_mem: memory@80800000 {
422			reg = <0x0 0x80800000 0x0 0x60000>;
423			no-map;
424		};
425
426		aop_cmd_db_mem: memory@80860000 {
427			compatible = "qcom,cmd-db";
428			reg = <0x0 0x80860000 0x0 0x20000>;
429			no-map;
430		};
431
432		aop_config_mem: memory@80880000 {
433			reg = <0x0 0x80880000 0x0 0x20000>;
434			no-map;
435		};
436
437		tme_crash_dump_mem: memory@808a0000 {
438			reg = <0x0 0x808a0000 0x0 0x40000>;
439			no-map;
440		};
441
442		tme_log_mem: memory@808e0000 {
443			reg = <0x0 0x808e0000 0x0 0x4000>;
444			no-map;
445		};
446
447		uefi_log_mem: memory@808e4000 {
448			reg = <0x0 0x808e4000 0x0 0x10000>;
449			no-map;
450		};
451
452		/* secdata region can be reused by apps */
453		smem: memory@80900000 {
454			compatible = "qcom,smem";
455			reg = <0x0 0x80900000 0x0 0x200000>;
456			hwlocks = <&tcsr_mutex 3>;
457			no-map;
458		};
459
460		cpucp_fw_mem: memory@80b00000 {
461			reg = <0x0 0x80b00000 0x0 0x100000>;
462			no-map;
463		};
464
465		cdsp_secure_heap: memory@80c00000 {
466			reg = <0x0 0x80c00000 0x0 0x4600000>;
467			no-map;
468		};
469
470		video_mem: memory@85700000 {
471			reg = <0x0 0x85700000 0x0 0x700000>;
472			no-map;
473		};
474
475		adsp_mem: memory@85e00000 {
476			reg = <0x0 0x85e00000 0x0 0x2100000>;
477			no-map;
478		};
479
480		slpi_mem: memory@88000000 {
481			reg = <0x0 0x88000000 0x0 0x1900000>;
482			no-map;
483		};
484
485		cdsp_mem: memory@89900000 {
486			reg = <0x0 0x89900000 0x0 0x2000000>;
487			no-map;
488		};
489
490		ipa_fw_mem: memory@8b900000 {
491			reg = <0x0 0x8b900000 0x0 0x10000>;
492			no-map;
493		};
494
495		ipa_gsi_mem: memory@8b910000 {
496			reg = <0x0 0x8b910000 0x0 0xa000>;
497			no-map;
498		};
499
500		gpu_micro_code_mem: memory@8b91a000 {
501			reg = <0x0 0x8b91a000 0x0 0x2000>;
502			no-map;
503		};
504
505		spss_region_mem: memory@8ba00000 {
506			reg = <0x0 0x8ba00000 0x0 0x180000>;
507			no-map;
508		};
509
510		/* First part of the "SPU secure shared memory" region */
511		spu_tz_shared_mem: memory@8bb80000 {
512			reg = <0x0 0x8bb80000 0x0 0x60000>;
513			no-map;
514		};
515
516		/* Second part of the "SPU secure shared memory" region */
517		spu_modem_shared_mem: memory@8bbe0000 {
518			reg = <0x0 0x8bbe0000 0x0 0x20000>;
519			no-map;
520		};
521
522		mpss_mem: memory@8bc00000 {
523			reg = <0x0 0x8bc00000 0x0 0x13200000>;
524			no-map;
525		};
526
527		cvp_mem: memory@9ee00000 {
528			reg = <0x0 0x9ee00000 0x0 0x700000>;
529			no-map;
530		};
531
532		camera_mem: memory@9f500000 {
533			reg = <0x0 0x9f500000 0x0 0x800000>;
534			no-map;
535		};
536
537		rmtfs_mem: memory@9fd00000 {
538			compatible = "qcom,rmtfs-mem";
539			reg = <0x0 0x9fd00000 0x0 0x280000>;
540			no-map;
541
542			qcom,client-id = <1>;
543			qcom,vmid = <15>;
544		};
545
546		xbl_sc_mem2: memory@a6e00000 {
547			reg = <0x0 0xa6e00000 0x0 0x40000>;
548			no-map;
549		};
550
551		global_sync_mem: memory@a6f00000 {
552			reg = <0x0 0xa6f00000 0x0 0x100000>;
553			no-map;
554		};
555
556		/* uefi region can be reused by APPS */
557
558		/* Linux kernel image is loaded at 0xa0000000 */
559
560		oem_vm_mem: memory@bb000000 {
561			reg = <0x0 0xbb000000 0x0 0x5000000>;
562			no-map;
563		};
564
565		mte_mem: memory@c0000000 {
566			reg = <0x0 0xc0000000 0x0 0x20000000>;
567			no-map;
568		};
569
570		qheebsp_reserved_mem: memory@e0000000 {
571			reg = <0x0 0xe0000000 0x0 0x600000>;
572			no-map;
573		};
574
575		cpusys_vm_mem: memory@e0600000 {
576			reg = <0x0 0xe0600000 0x0 0x400000>;
577			no-map;
578		};
579
580		hyp_reserved_mem: memory@e0a00000 {
581			reg = <0x0 0xe0a00000 0x0 0x100000>;
582			no-map;
583		};
584
585		trust_ui_vm_mem: memory@e0b00000 {
586			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
587			no-map;
588		};
589
590		trust_ui_vm_qrtr: memory@e55f3000 {
591			reg = <0x0 0xe55f3000 0x0 0x9000>;
592			no-map;
593		};
594
595		trust_ui_vm_vblk0_ring: memory@e55fc000 {
596			reg = <0x0 0xe55fc000 0x0 0x4000>;
597			no-map;
598		};
599
600		trust_ui_vm_swiotlb: memory@e5600000 {
601			reg = <0x0 0xe5600000 0x0 0x100000>;
602			no-map;
603		};
604
605		tz_stat_mem: memory@e8800000 {
606			reg = <0x0 0xe8800000 0x0 0x100000>;
607			no-map;
608		};
609
610		tags_mem: memory@e8900000 {
611			reg = <0x0 0xe8900000 0x0 0x1200000>;
612			no-map;
613		};
614
615		qtee_mem: memory@e9b00000 {
616			reg = <0x0 0xe9b00000 0x0 0x500000>;
617			no-map;
618		};
619
620		trusted_apps_mem: memory@ea000000 {
621			reg = <0x0 0xea000000 0x0 0x3900000>;
622			no-map;
623		};
624
625		trusted_apps_ext_mem: memory@ed900000 {
626			reg = <0x0 0xed900000 0x0 0x3b00000>;
627			no-map;
628		};
629	};
630
631	smp2p-adsp {
632		compatible = "qcom,smp2p";
633		qcom,smem = <443>, <429>;
634		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
635					     IPCC_MPROC_SIGNAL_SMP2P
636					     IRQ_TYPE_EDGE_RISING>;
637		mboxes = <&ipcc IPCC_CLIENT_LPASS
638				IPCC_MPROC_SIGNAL_SMP2P>;
639
640		qcom,local-pid = <0>;
641		qcom,remote-pid = <2>;
642
643		smp2p_adsp_out: master-kernel {
644			qcom,entry-name = "master-kernel";
645			#qcom,smem-state-cells = <1>;
646		};
647
648		smp2p_adsp_in: slave-kernel {
649			qcom,entry-name = "slave-kernel";
650			interrupt-controller;
651			#interrupt-cells = <2>;
652		};
653	};
654
655	smp2p-cdsp {
656		compatible = "qcom,smp2p";
657		qcom,smem = <94>, <432>;
658		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
659					     IPCC_MPROC_SIGNAL_SMP2P
660					     IRQ_TYPE_EDGE_RISING>;
661		mboxes = <&ipcc IPCC_CLIENT_CDSP
662				IPCC_MPROC_SIGNAL_SMP2P>;
663
664		qcom,local-pid = <0>;
665		qcom,remote-pid = <5>;
666
667		smp2p_cdsp_out: master-kernel {
668			qcom,entry-name = "master-kernel";
669			#qcom,smem-state-cells = <1>;
670		};
671
672		smp2p_cdsp_in: slave-kernel {
673			qcom,entry-name = "slave-kernel";
674			interrupt-controller;
675			#interrupt-cells = <2>;
676		};
677	};
678
679	smp2p-modem {
680		compatible = "qcom,smp2p";
681		qcom,smem = <435>, <428>;
682		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
683					     IPCC_MPROC_SIGNAL_SMP2P
684					     IRQ_TYPE_EDGE_RISING>;
685		mboxes = <&ipcc IPCC_CLIENT_MPSS
686				IPCC_MPROC_SIGNAL_SMP2P>;
687
688		qcom,local-pid = <0>;
689		qcom,remote-pid = <1>;
690
691		smp2p_modem_out: master-kernel {
692			qcom,entry-name = "master-kernel";
693			#qcom,smem-state-cells = <1>;
694		};
695
696		smp2p_modem_in: slave-kernel {
697			qcom,entry-name = "slave-kernel";
698			interrupt-controller;
699			#interrupt-cells = <2>;
700		};
701
702		ipa_smp2p_out: ipa-ap-to-modem {
703			qcom,entry-name = "ipa";
704			#qcom,smem-state-cells = <1>;
705		};
706
707		ipa_smp2p_in: ipa-modem-to-ap {
708			qcom,entry-name = "ipa";
709			interrupt-controller;
710			#interrupt-cells = <2>;
711		};
712	};
713
714	smp2p-slpi {
715		compatible = "qcom,smp2p";
716		qcom,smem = <481>, <430>;
717		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
718					     IPCC_MPROC_SIGNAL_SMP2P
719					     IRQ_TYPE_EDGE_RISING>;
720		mboxes = <&ipcc IPCC_CLIENT_SLPI
721				IPCC_MPROC_SIGNAL_SMP2P>;
722
723		qcom,local-pid = <0>;
724		qcom,remote-pid = <3>;
725
726		smp2p_slpi_out: master-kernel {
727			qcom,entry-name = "master-kernel";
728			#qcom,smem-state-cells = <1>;
729		};
730
731		smp2p_slpi_in: slave-kernel {
732			qcom,entry-name = "slave-kernel";
733			interrupt-controller;
734			#interrupt-cells = <2>;
735		};
736	};
737
738	soc: soc@0 {
739		#address-cells = <2>;
740		#size-cells = <2>;
741		ranges = <0 0 0 0 0x10 0>;
742		dma-ranges = <0 0 0 0 0x10 0>;
743		compatible = "simple-bus";
744
745		gcc: clock-controller@100000 {
746			compatible = "qcom,gcc-sm8450";
747			reg = <0x0 0x00100000 0x0 0x1f4200>;
748			#clock-cells = <1>;
749			#reset-cells = <1>;
750			#power-domain-cells = <1>;
751			clocks = <&rpmhcc RPMH_CXO_CLK>,
752				 <&sleep_clk>,
753				 <&pcie0_lane>,
754				 <&pcie1_lane>,
755				 <0>,
756				 <&ufs_mem_phy_lanes 0>,
757				 <&ufs_mem_phy_lanes 1>,
758				 <&ufs_mem_phy_lanes 2>,
759				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
760			clock-names = "bi_tcxo",
761				      "sleep_clk",
762				      "pcie_0_pipe_clk",
763				      "pcie_1_pipe_clk",
764				      "pcie_1_phy_aux_clk",
765				      "ufs_phy_rx_symbol_0_clk",
766				      "ufs_phy_rx_symbol_1_clk",
767				      "ufs_phy_tx_symbol_0_clk",
768				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
769		};
770
771		gpi_dma2: dma-controller@800000 {
772			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
773			#dma-cells = <3>;
774			reg = <0 0x00800000 0 0x60000>;
775			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
776				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
777				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
778				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
779				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
780				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
781				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
782				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
783				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
784				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
785				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
786				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
787			dma-channels = <12>;
788			dma-channel-mask = <0x7e>;
789			iommus = <&apps_smmu 0x496 0x0>;
790			status = "disabled";
791		};
792
793		qupv3_id_2: geniqup@8c0000 {
794			compatible = "qcom,geni-se-qup";
795			reg = <0x0 0x008c0000 0x0 0x2000>;
796			clock-names = "m-ahb", "s-ahb";
797			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
798				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
799			iommus = <&apps_smmu 0x483 0x0>;
800			#address-cells = <2>;
801			#size-cells = <2>;
802			ranges;
803			status = "disabled";
804
805			i2c15: i2c@880000 {
806				compatible = "qcom,geni-i2c";
807				reg = <0x0 0x00880000 0x0 0x4000>;
808				clock-names = "se";
809				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
810				pinctrl-names = "default";
811				pinctrl-0 = <&qup_i2c15_data_clk>;
812				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
813				#address-cells = <1>;
814				#size-cells = <0>;
815				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
816						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
817						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
818				interconnect-names = "qup-core", "qup-config", "qup-memory";
819				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
820				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
821				dma-names = "tx", "rx";
822				status = "disabled";
823			};
824
825			spi15: spi@880000 {
826				compatible = "qcom,geni-spi";
827				reg = <0x0 0x00880000 0x0 0x4000>;
828				clock-names = "se";
829				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
830				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
831				pinctrl-names = "default";
832				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
833				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
834						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
835				interconnect-names = "qup-core", "qup-config";
836				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
837				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
838				dma-names = "tx", "rx";
839				#address-cells = <1>;
840				#size-cells = <0>;
841				status = "disabled";
842			};
843
844			i2c16: i2c@884000 {
845				compatible = "qcom,geni-i2c";
846				reg = <0x0 0x00884000 0x0 0x4000>;
847				clock-names = "se";
848				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
849				pinctrl-names = "default";
850				pinctrl-0 = <&qup_i2c16_data_clk>;
851				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
852				#address-cells = <1>;
853				#size-cells = <0>;
854				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
855						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
856						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
857				interconnect-names = "qup-core", "qup-config", "qup-memory";
858				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
859				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
860				dma-names = "tx", "rx";
861				status = "disabled";
862			};
863
864			spi16: spi@884000 {
865				compatible = "qcom,geni-spi";
866				reg = <0x0 0x00884000 0x0 0x4000>;
867				clock-names = "se";
868				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
869				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
870				pinctrl-names = "default";
871				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
872				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
873						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
874				interconnect-names = "qup-core", "qup-config";
875				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
876				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
877				dma-names = "tx", "rx";
878				#address-cells = <1>;
879				#size-cells = <0>;
880				status = "disabled";
881			};
882
883			i2c17: i2c@888000 {
884				compatible = "qcom,geni-i2c";
885				reg = <0x0 0x00888000 0x0 0x4000>;
886				clock-names = "se";
887				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
888				pinctrl-names = "default";
889				pinctrl-0 = <&qup_i2c17_data_clk>;
890				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
891				#address-cells = <1>;
892				#size-cells = <0>;
893				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
894						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
895						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
896				interconnect-names = "qup-core", "qup-config", "qup-memory";
897				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
898				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
899				dma-names = "tx", "rx";
900				status = "disabled";
901			};
902
903			spi17: spi@888000 {
904				compatible = "qcom,geni-spi";
905				reg = <0x0 0x00888000 0x0 0x4000>;
906				clock-names = "se";
907				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
908				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
909				pinctrl-names = "default";
910				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
911				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
912						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
913				interconnect-names = "qup-core", "qup-config";
914				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
915				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
916				dma-names = "tx", "rx";
917				#address-cells = <1>;
918				#size-cells = <0>;
919				status = "disabled";
920			};
921
922			i2c18: i2c@88c000 {
923				compatible = "qcom,geni-i2c";
924				reg = <0x0 0x0088c000 0x0 0x4000>;
925				clock-names = "se";
926				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
927				pinctrl-names = "default";
928				pinctrl-0 = <&qup_i2c18_data_clk>;
929				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
930				#address-cells = <1>;
931				#size-cells = <0>;
932				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
933						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
934						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
935				interconnect-names = "qup-core", "qup-config", "qup-memory";
936				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
937				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
938				dma-names = "tx", "rx";
939				status = "disabled";
940			};
941
942			spi18: spi@88c000 {
943				compatible = "qcom,geni-spi";
944				reg = <0 0x0088c000 0 0x4000>;
945				clock-names = "se";
946				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
947				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
948				pinctrl-names = "default";
949				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
950				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
951						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
952				interconnect-names = "qup-core", "qup-config";
953				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
954				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
955				dma-names = "tx", "rx";
956				#address-cells = <1>;
957				#size-cells = <0>;
958				status = "disabled";
959			};
960
961			i2c19: i2c@890000 {
962				compatible = "qcom,geni-i2c";
963				reg = <0x0 0x00890000 0x0 0x4000>;
964				clock-names = "se";
965				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
966				pinctrl-names = "default";
967				pinctrl-0 = <&qup_i2c19_data_clk>;
968				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
969				#address-cells = <1>;
970				#size-cells = <0>;
971				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
972						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
973						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
974				interconnect-names = "qup-core", "qup-config", "qup-memory";
975				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
976				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
977				dma-names = "tx", "rx";
978				status = "disabled";
979			};
980
981			spi19: spi@890000 {
982				compatible = "qcom,geni-spi";
983				reg = <0 0x00890000 0 0x4000>;
984				clock-names = "se";
985				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
986				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
987				pinctrl-names = "default";
988				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
989				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
990						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
991				interconnect-names = "qup-core", "qup-config";
992				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
993				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
994				dma-names = "tx", "rx";
995				#address-cells = <1>;
996				#size-cells = <0>;
997				status = "disabled";
998			};
999
1000			i2c20: i2c@894000 {
1001				compatible = "qcom,geni-i2c";
1002				reg = <0x0 0x00894000 0x0 0x4000>;
1003				clock-names = "se";
1004				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1005				pinctrl-names = "default";
1006				pinctrl-0 = <&qup_i2c20_data_clk>;
1007				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1008				#address-cells = <1>;
1009				#size-cells = <0>;
1010				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1011						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1012						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
1013				interconnect-names = "qup-core", "qup-config", "qup-memory";
1014				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1015				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1016				dma-names = "tx", "rx";
1017				status = "disabled";
1018			};
1019
1020			uart20: serial@894000 {
1021				compatible = "qcom,geni-uart";
1022				reg = <0 0x00894000 0 0x4000>;
1023				clock-names = "se";
1024				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1025				pinctrl-names = "default";
1026				pinctrl-0 = <&qup_uart20_default>;
1027				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1028				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
1029						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
1030						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1031						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
1032				interconnect-names = "qup-core",
1033						     "qup-config";
1034				status = "disabled";
1035			};
1036
1037			spi20: spi@894000 {
1038				compatible = "qcom,geni-spi";
1039				reg = <0 0x00894000 0 0x4000>;
1040				clock-names = "se";
1041				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1042				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1043				pinctrl-names = "default";
1044				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
1045				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1046						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1047				interconnect-names = "qup-core", "qup-config";
1048				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1049				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1050				dma-names = "tx", "rx";
1051				#address-cells = <1>;
1052				#size-cells = <0>;
1053				status = "disabled";
1054			};
1055
1056			i2c21: i2c@898000 {
1057				compatible = "qcom,geni-i2c";
1058				reg = <0x0 0x00898000 0x0 0x4000>;
1059				clock-names = "se";
1060				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1061				pinctrl-names = "default";
1062				pinctrl-0 = <&qup_i2c21_data_clk>;
1063				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1064				#address-cells = <1>;
1065				#size-cells = <0>;
1066				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1067						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1068						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
1069				interconnect-names = "qup-core", "qup-config", "qup-memory";
1070				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
1071				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
1072				dma-names = "tx", "rx";
1073				status = "disabled";
1074			};
1075
1076			spi21: spi@898000 {
1077				compatible = "qcom,geni-spi";
1078				reg = <0 0x00898000 0 0x4000>;
1079				clock-names = "se";
1080				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1081				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1082				pinctrl-names = "default";
1083				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
1084				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1085						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1086				interconnect-names = "qup-core", "qup-config";
1087				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
1088				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
1089				dma-names = "tx", "rx";
1090				#address-cells = <1>;
1091				#size-cells = <0>;
1092				status = "disabled";
1093			};
1094		};
1095
1096		gpi_dma0: dma-controller@900000 {
1097			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
1098			#dma-cells = <3>;
1099			reg = <0 0x00900000 0 0x60000>;
1100			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1101				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1102				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
1103				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1104				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1105				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1106				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1107				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1108				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1109				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1110				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1111				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1112			dma-channels = <12>;
1113			dma-channel-mask = <0x7e>;
1114			iommus = <&apps_smmu 0x5b6 0x0>;
1115			status = "disabled";
1116		};
1117
1118		qupv3_id_0: geniqup@9c0000 {
1119			compatible = "qcom,geni-se-qup";
1120			reg = <0x0 0x009c0000 0x0 0x2000>;
1121			clock-names = "m-ahb", "s-ahb";
1122			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1123				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1124			iommus = <&apps_smmu 0x5a3 0x0>;
1125			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
1126			interconnect-names = "qup-core";
1127			#address-cells = <2>;
1128			#size-cells = <2>;
1129			ranges;
1130			status = "disabled";
1131
1132			i2c0: i2c@980000 {
1133				compatible = "qcom,geni-i2c";
1134				reg = <0x0 0x00980000 0x0 0x4000>;
1135				clock-names = "se";
1136				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1137				pinctrl-names = "default";
1138				pinctrl-0 = <&qup_i2c0_data_clk>;
1139				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1140				#address-cells = <1>;
1141				#size-cells = <0>;
1142				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1143						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1144						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1145				interconnect-names = "qup-core", "qup-config", "qup-memory";
1146				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1147				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1148				dma-names = "tx", "rx";
1149				status = "disabled";
1150			};
1151
1152			spi0: spi@980000 {
1153				compatible = "qcom,geni-spi";
1154				reg = <0x0 0x00980000 0x0 0x4000>;
1155				clock-names = "se";
1156				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1157				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1158				pinctrl-names = "default";
1159				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1160				power-domains = <&rpmhpd RPMHPD_CX>;
1161				operating-points-v2 = <&qup_opp_table_100mhz>;
1162				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1163						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1164						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1165				interconnect-names = "qup-core", "qup-config", "qup-memory";
1166				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1167				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1168				dma-names = "tx", "rx";
1169				#address-cells = <1>;
1170				#size-cells = <0>;
1171				status = "disabled";
1172			};
1173
1174			i2c1: i2c@984000 {
1175				compatible = "qcom,geni-i2c";
1176				reg = <0x0 0x00984000 0x0 0x4000>;
1177				clock-names = "se";
1178				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1179				pinctrl-names = "default";
1180				pinctrl-0 = <&qup_i2c1_data_clk>;
1181				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1182				#address-cells = <1>;
1183				#size-cells = <0>;
1184				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1185						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1186						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1187				interconnect-names = "qup-core", "qup-config", "qup-memory";
1188				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1189				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1190				dma-names = "tx", "rx";
1191				status = "disabled";
1192			};
1193
1194			spi1: spi@984000 {
1195				compatible = "qcom,geni-spi";
1196				reg = <0x0 0x00984000 0x0 0x4000>;
1197				clock-names = "se";
1198				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1199				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1200				pinctrl-names = "default";
1201				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1202				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1203						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1204						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1205				interconnect-names = "qup-core", "qup-config", "qup-memory";
1206				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1207				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1208				dma-names = "tx", "rx";
1209				#address-cells = <1>;
1210				#size-cells = <0>;
1211				status = "disabled";
1212			};
1213
1214			i2c2: i2c@988000 {
1215				compatible = "qcom,geni-i2c";
1216				reg = <0x0 0x00988000 0x0 0x4000>;
1217				clock-names = "se";
1218				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1219				pinctrl-names = "default";
1220				pinctrl-0 = <&qup_i2c2_data_clk>;
1221				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1222				#address-cells = <1>;
1223				#size-cells = <0>;
1224				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1225						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1226						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1227				interconnect-names = "qup-core", "qup-config", "qup-memory";
1228				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1229				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1230				dma-names = "tx", "rx";
1231				status = "disabled";
1232			};
1233
1234			spi2: spi@988000 {
1235				compatible = "qcom,geni-spi";
1236				reg = <0x0 0x00988000 0x0 0x4000>;
1237				clock-names = "se";
1238				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1239				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1240				pinctrl-names = "default";
1241				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1242				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1243						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1244						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1245				interconnect-names = "qup-core", "qup-config", "qup-memory";
1246				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1247				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1248				dma-names = "tx", "rx";
1249				#address-cells = <1>;
1250				#size-cells = <0>;
1251				status = "disabled";
1252			};
1253
1254
1255			i2c3: i2c@98c000 {
1256				compatible = "qcom,geni-i2c";
1257				reg = <0x0 0x0098c000 0x0 0x4000>;
1258				clock-names = "se";
1259				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1260				pinctrl-names = "default";
1261				pinctrl-0 = <&qup_i2c3_data_clk>;
1262				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1263				#address-cells = <1>;
1264				#size-cells = <0>;
1265				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1266						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1267						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1268				interconnect-names = "qup-core", "qup-config", "qup-memory";
1269				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1270				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1271				dma-names = "tx", "rx";
1272				status = "disabled";
1273			};
1274
1275			spi3: spi@98c000 {
1276				compatible = "qcom,geni-spi";
1277				reg = <0x0 0x0098c000 0x0 0x4000>;
1278				clock-names = "se";
1279				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1280				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1281				pinctrl-names = "default";
1282				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1283				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1284						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1285						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1286				interconnect-names = "qup-core", "qup-config", "qup-memory";
1287				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1288				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1289				dma-names = "tx", "rx";
1290				#address-cells = <1>;
1291				#size-cells = <0>;
1292				status = "disabled";
1293			};
1294
1295			i2c4: i2c@990000 {
1296				compatible = "qcom,geni-i2c";
1297				reg = <0x0 0x00990000 0x0 0x4000>;
1298				clock-names = "se";
1299				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1300				pinctrl-names = "default";
1301				pinctrl-0 = <&qup_i2c4_data_clk>;
1302				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1303				#address-cells = <1>;
1304				#size-cells = <0>;
1305				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1306						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1307						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1308				interconnect-names = "qup-core", "qup-config", "qup-memory";
1309				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1310				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1311				dma-names = "tx", "rx";
1312				status = "disabled";
1313			};
1314
1315			spi4: spi@990000 {
1316				compatible = "qcom,geni-spi";
1317				reg = <0x0 0x00990000 0x0 0x4000>;
1318				clock-names = "se";
1319				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1320				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1321				pinctrl-names = "default";
1322				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1323				power-domains = <&rpmhpd RPMHPD_CX>;
1324				operating-points-v2 = <&qup_opp_table_100mhz>;
1325				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1326						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1327						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1328				interconnect-names = "qup-core", "qup-config", "qup-memory";
1329				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1330				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1331				dma-names = "tx", "rx";
1332				#address-cells = <1>;
1333				#size-cells = <0>;
1334				status = "disabled";
1335			};
1336
1337			i2c5: i2c@994000 {
1338				compatible = "qcom,geni-i2c";
1339				reg = <0x0 0x00994000 0x0 0x4000>;
1340				clock-names = "se";
1341				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1342				pinctrl-names = "default";
1343				pinctrl-0 = <&qup_i2c5_data_clk>;
1344				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1345				#address-cells = <1>;
1346				#size-cells = <0>;
1347				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1348						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1349						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1350				interconnect-names = "qup-core", "qup-config", "qup-memory";
1351				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1352				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1353				dma-names = "tx", "rx";
1354				status = "disabled";
1355			};
1356
1357			spi5: spi@994000 {
1358				compatible = "qcom,geni-spi";
1359				reg = <0x0 0x00994000 0x0 0x4000>;
1360				clock-names = "se";
1361				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1362				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1363				pinctrl-names = "default";
1364				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1365				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1366						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1367						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1368				interconnect-names = "qup-core", "qup-config", "qup-memory";
1369				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1370				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1371				dma-names = "tx", "rx";
1372				#address-cells = <1>;
1373				#size-cells = <0>;
1374				status = "disabled";
1375			};
1376
1377
1378			i2c6: i2c@998000 {
1379				compatible = "qcom,geni-i2c";
1380				reg = <0x0 0x00998000 0x0 0x4000>;
1381				clock-names = "se";
1382				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1383				pinctrl-names = "default";
1384				pinctrl-0 = <&qup_i2c6_data_clk>;
1385				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1386				#address-cells = <1>;
1387				#size-cells = <0>;
1388				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1389						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1390						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1391				interconnect-names = "qup-core", "qup-config", "qup-memory";
1392				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1393				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1394				dma-names = "tx", "rx";
1395				status = "disabled";
1396			};
1397
1398			spi6: spi@998000 {
1399				compatible = "qcom,geni-spi";
1400				reg = <0x0 0x00998000 0x0 0x4000>;
1401				clock-names = "se";
1402				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1403				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1404				pinctrl-names = "default";
1405				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1406				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1407						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1408						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1409				interconnect-names = "qup-core", "qup-config", "qup-memory";
1410				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1411				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1412				dma-names = "tx", "rx";
1413				#address-cells = <1>;
1414				#size-cells = <0>;
1415				status = "disabled";
1416			};
1417
1418			uart7: serial@99c000 {
1419				compatible = "qcom,geni-debug-uart";
1420				reg = <0 0x0099c000 0 0x4000>;
1421				clock-names = "se";
1422				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1423				pinctrl-names = "default";
1424				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
1425				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1426				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
1427						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
1428						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1429						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
1430				interconnect-names = "qup-core",
1431						     "qup-config";
1432				status = "disabled";
1433			};
1434		};
1435
1436		gpi_dma1: dma-controller@a00000 {
1437			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
1438			#dma-cells = <3>;
1439			reg = <0 0x00a00000 0 0x60000>;
1440			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1441				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1442				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1443				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1444				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1445				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1446				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1447				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1448				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1449				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1450				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1451				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1452			dma-channels = <12>;
1453			dma-channel-mask = <0x7e>;
1454			iommus = <&apps_smmu 0x56 0x0>;
1455			status = "disabled";
1456		};
1457
1458		qupv3_id_1: geniqup@ac0000 {
1459			compatible = "qcom,geni-se-qup";
1460			reg = <0x0 0x00ac0000 0x0 0x6000>;
1461			clock-names = "m-ahb", "s-ahb";
1462			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1463				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1464			iommus = <&apps_smmu 0x43 0x0>;
1465			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1466			interconnect-names = "qup-core";
1467			#address-cells = <2>;
1468			#size-cells = <2>;
1469			ranges;
1470			status = "disabled";
1471
1472			i2c8: i2c@a80000 {
1473				compatible = "qcom,geni-i2c";
1474				reg = <0x0 0x00a80000 0x0 0x4000>;
1475				clock-names = "se";
1476				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1477				pinctrl-names = "default";
1478				pinctrl-0 = <&qup_i2c8_data_clk>;
1479				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1480				#address-cells = <1>;
1481				#size-cells = <0>;
1482				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1483						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1484						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1485				interconnect-names = "qup-core", "qup-config", "qup-memory";
1486				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1487				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1488				dma-names = "tx", "rx";
1489				status = "disabled";
1490			};
1491
1492			spi8: spi@a80000 {
1493				compatible = "qcom,geni-spi";
1494				reg = <0x0 0x00a80000 0x0 0x4000>;
1495				clock-names = "se";
1496				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1497				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1498				pinctrl-names = "default";
1499				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
1500				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1501						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1502						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1503				interconnect-names = "qup-core", "qup-config", "qup-memory";
1504				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1505				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1506				dma-names = "tx", "rx";
1507				#address-cells = <1>;
1508				#size-cells = <0>;
1509				status = "disabled";
1510			};
1511
1512			i2c9: i2c@a84000 {
1513				compatible = "qcom,geni-i2c";
1514				reg = <0x0 0x00a84000 0x0 0x4000>;
1515				clock-names = "se";
1516				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1517				pinctrl-names = "default";
1518				pinctrl-0 = <&qup_i2c9_data_clk>;
1519				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1520				#address-cells = <1>;
1521				#size-cells = <0>;
1522				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1523						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1524						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1525				interconnect-names = "qup-core", "qup-config", "qup-memory";
1526				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1527				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1528				dma-names = "tx", "rx";
1529				status = "disabled";
1530			};
1531
1532			spi9: spi@a84000 {
1533				compatible = "qcom,geni-spi";
1534				reg = <0x0 0x00a84000 0x0 0x4000>;
1535				clock-names = "se";
1536				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1537				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1538				pinctrl-names = "default";
1539				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
1540				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1541						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1542						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1543				interconnect-names = "qup-core", "qup-config", "qup-memory";
1544				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1545				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1546				dma-names = "tx", "rx";
1547				#address-cells = <1>;
1548				#size-cells = <0>;
1549				status = "disabled";
1550			};
1551
1552			i2c10: i2c@a88000 {
1553				compatible = "qcom,geni-i2c";
1554				reg = <0x0 0x00a88000 0x0 0x4000>;
1555				clock-names = "se";
1556				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1557				pinctrl-names = "default";
1558				pinctrl-0 = <&qup_i2c10_data_clk>;
1559				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1560				#address-cells = <1>;
1561				#size-cells = <0>;
1562				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1563						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1564						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1565				interconnect-names = "qup-core", "qup-config", "qup-memory";
1566				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1567				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1568				dma-names = "tx", "rx";
1569				status = "disabled";
1570			};
1571
1572			spi10: spi@a88000 {
1573				compatible = "qcom,geni-spi";
1574				reg = <0x0 0x00a88000 0x0 0x4000>;
1575				clock-names = "se";
1576				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1577				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1578				pinctrl-names = "default";
1579				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
1580				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1581						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1582						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1583				interconnect-names = "qup-core", "qup-config", "qup-memory";
1584				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1585				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1586				dma-names = "tx", "rx";
1587				#address-cells = <1>;
1588				#size-cells = <0>;
1589				status = "disabled";
1590			};
1591
1592			i2c11: i2c@a8c000 {
1593				compatible = "qcom,geni-i2c";
1594				reg = <0x0 0x00a8c000 0x0 0x4000>;
1595				clock-names = "se";
1596				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1597				pinctrl-names = "default";
1598				pinctrl-0 = <&qup_i2c11_data_clk>;
1599				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1600				#address-cells = <1>;
1601				#size-cells = <0>;
1602				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1603						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1604						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1605				interconnect-names = "qup-core", "qup-config", "qup-memory";
1606				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1607				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1608				dma-names = "tx", "rx";
1609				status = "disabled";
1610			};
1611
1612			spi11: spi@a8c000 {
1613				compatible = "qcom,geni-spi";
1614				reg = <0x0 0x00a8c000 0x0 0x4000>;
1615				clock-names = "se";
1616				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1617				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1618				pinctrl-names = "default";
1619				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
1620				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1621						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1622						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1623				interconnect-names = "qup-core", "qup-config", "qup-memory";
1624				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1625				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1626				dma-names = "tx", "rx";
1627				#address-cells = <1>;
1628				#size-cells = <0>;
1629				status = "disabled";
1630			};
1631
1632			i2c12: i2c@a90000 {
1633				compatible = "qcom,geni-i2c";
1634				reg = <0x0 0x00a90000 0x0 0x4000>;
1635				clock-names = "se";
1636				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1637				pinctrl-names = "default";
1638				pinctrl-0 = <&qup_i2c12_data_clk>;
1639				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1640				#address-cells = <1>;
1641				#size-cells = <0>;
1642				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1643						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1644						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1645				interconnect-names = "qup-core", "qup-config", "qup-memory";
1646				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1647				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1648				dma-names = "tx", "rx";
1649				status = "disabled";
1650			};
1651
1652			spi12: spi@a90000 {
1653				compatible = "qcom,geni-spi";
1654				reg = <0x0 0x00a90000 0x0 0x4000>;
1655				clock-names = "se";
1656				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1657				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1658				pinctrl-names = "default";
1659				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1660				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1661						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1662						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1663				interconnect-names = "qup-core", "qup-config", "qup-memory";
1664				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1665				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1666				dma-names = "tx", "rx";
1667				#address-cells = <1>;
1668				#size-cells = <0>;
1669				status = "disabled";
1670			};
1671
1672			i2c13: i2c@a94000 {
1673				compatible = "qcom,geni-i2c";
1674				reg = <0 0x00a94000 0 0x4000>;
1675				clock-names = "se";
1676				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1677				pinctrl-names = "default";
1678				pinctrl-0 = <&qup_i2c13_data_clk>;
1679				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1680				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1681						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1682						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1683				interconnect-names = "qup-core", "qup-config", "qup-memory";
1684				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1685				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1686				dma-names = "tx", "rx";
1687				#address-cells = <1>;
1688				#size-cells = <0>;
1689				status = "disabled";
1690			};
1691
1692			spi13: spi@a94000 {
1693				compatible = "qcom,geni-spi";
1694				reg = <0x0 0x00a94000 0x0 0x4000>;
1695				clock-names = "se";
1696				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1697				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1698				pinctrl-names = "default";
1699				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1700				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1701						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1702						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1703				interconnect-names = "qup-core", "qup-config", "qup-memory";
1704				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1705				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1706				dma-names = "tx", "rx";
1707				#address-cells = <1>;
1708				#size-cells = <0>;
1709				status = "disabled";
1710			};
1711
1712			i2c14: i2c@a98000 {
1713				compatible = "qcom,geni-i2c";
1714				reg = <0 0x00a98000 0 0x4000>;
1715				clock-names = "se";
1716				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1717				pinctrl-names = "default";
1718				pinctrl-0 = <&qup_i2c14_data_clk>;
1719				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1720				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1721						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1722						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1723				interconnect-names = "qup-core", "qup-config", "qup-memory";
1724				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1725				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1726				dma-names = "tx", "rx";
1727				#address-cells = <1>;
1728				#size-cells = <0>;
1729				status = "disabled";
1730			};
1731
1732			spi14: spi@a98000 {
1733				compatible = "qcom,geni-spi";
1734				reg = <0x0 0x00a98000 0x0 0x4000>;
1735				clock-names = "se";
1736				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1737				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1738				pinctrl-names = "default";
1739				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
1740				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1741						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1742						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1743				interconnect-names = "qup-core", "qup-config", "qup-memory";
1744				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1745				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1746				dma-names = "tx", "rx";
1747				#address-cells = <1>;
1748				#size-cells = <0>;
1749				status = "disabled";
1750			};
1751		};
1752
1753		rng: rng@10c3000 {
1754			compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee";
1755			reg = <0 0x010c3000 0 0x1000>;
1756		};
1757
1758		pcie0: pci@1c00000 {
1759			compatible = "qcom,pcie-sm8450-pcie0";
1760			reg = <0 0x01c00000 0 0x3000>,
1761			      <0 0x60000000 0 0xf1d>,
1762			      <0 0x60000f20 0 0xa8>,
1763			      <0 0x60001000 0 0x1000>,
1764			      <0 0x60100000 0 0x100000>;
1765			reg-names = "parf", "dbi", "elbi", "atu", "config";
1766			device_type = "pci";
1767			linux,pci-domain = <0>;
1768			bus-range = <0x00 0xff>;
1769			num-lanes = <1>;
1770
1771			#address-cells = <3>;
1772			#size-cells = <2>;
1773
1774			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
1775				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1776
1777			msi-map = <0x0 &gic_its 0x5980 0x1>,
1778				  <0x100 &gic_its 0x5981 0x1>;
1779			msi-map-mask = <0xff00>;
1780			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1781			interrupt-names = "msi";
1782			#interrupt-cells = <1>;
1783			interrupt-map-mask = <0 0 0 0x7>;
1784			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1785					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1786					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1787					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1788
1789			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1790				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
1791				 <&pcie0_lane>,
1792				 <&rpmhcc RPMH_CXO_CLK>,
1793				 <&gcc GCC_PCIE_0_AUX_CLK>,
1794				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1795				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1796				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1797				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1798				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1799				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
1800				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1801			clock-names = "pipe",
1802				      "pipe_mux",
1803				      "phy_pipe",
1804				      "ref",
1805				      "aux",
1806				      "cfg",
1807				      "bus_master",
1808				      "bus_slave",
1809				      "slave_q2a",
1810				      "ddrss_sf_tbu",
1811				      "aggre0",
1812				      "aggre1";
1813
1814			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
1815				    <0x100 &apps_smmu 0x1c01 0x1>;
1816
1817			resets = <&gcc GCC_PCIE_0_BCR>;
1818			reset-names = "pci";
1819
1820			power-domains = <&gcc PCIE_0_GDSC>;
1821
1822			phys = <&pcie0_lane>;
1823			phy-names = "pciephy";
1824
1825			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
1826			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
1827
1828			pinctrl-names = "default";
1829			pinctrl-0 = <&pcie0_default_state>;
1830
1831			status = "disabled";
1832		};
1833
1834		pcie0_phy: phy@1c06000 {
1835			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
1836			reg = <0 0x01c06000 0 0x200>;
1837			#address-cells = <2>;
1838			#size-cells = <2>;
1839			ranges;
1840			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1841				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1842				 <&gcc GCC_PCIE_0_CLKREF_EN>,
1843				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1844			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1845
1846			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1847			reset-names = "phy";
1848
1849			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1850			assigned-clock-rates = <100000000>;
1851
1852			status = "disabled";
1853
1854			pcie0_lane: phy@1c06200 {
1855				reg = <0 0x01c06e00 0 0x200>, /* tx */
1856				      <0 0x01c07000 0 0x200>, /* rx */
1857				      <0 0x01c06200 0 0x200>, /* pcs */
1858				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
1859				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1860				clock-names = "pipe0";
1861
1862				#clock-cells = <0>;
1863				#phy-cells = <0>;
1864				clock-output-names = "pcie_0_pipe_clk";
1865			};
1866		};
1867
1868		pcie1: pci@1c08000 {
1869			compatible = "qcom,pcie-sm8450-pcie1";
1870			reg = <0 0x01c08000 0 0x3000>,
1871			      <0 0x40000000 0 0xf1d>,
1872			      <0 0x40000f20 0 0xa8>,
1873			      <0 0x40001000 0 0x1000>,
1874			      <0 0x40100000 0 0x100000>;
1875			reg-names = "parf", "dbi", "elbi", "atu", "config";
1876			device_type = "pci";
1877			linux,pci-domain = <1>;
1878			bus-range = <0x00 0xff>;
1879			num-lanes = <2>;
1880
1881			#address-cells = <3>;
1882			#size-cells = <2>;
1883
1884			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
1885				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1886
1887			msi-map = <0x0 &gic_its 0x5a00 0x1>,
1888				  <0x100 &gic_its 0x5a01 0x1>;
1889			msi-map-mask = <0xff00>;
1890			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1891			interrupt-names = "msi";
1892			#interrupt-cells = <1>;
1893			interrupt-map-mask = <0 0 0 0x7>;
1894			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1895					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1896					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1897					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1898
1899			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1900				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
1901				 <&pcie1_lane>,
1902				 <&rpmhcc RPMH_CXO_CLK>,
1903				 <&gcc GCC_PCIE_1_AUX_CLK>,
1904				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1905				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1906				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1907				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1908				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1909				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1910			clock-names = "pipe",
1911				      "pipe_mux",
1912				      "phy_pipe",
1913				      "ref",
1914				      "aux",
1915				      "cfg",
1916				      "bus_master",
1917				      "bus_slave",
1918				      "slave_q2a",
1919				      "ddrss_sf_tbu",
1920				      "aggre1";
1921
1922			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
1923				    <0x100 &apps_smmu 0x1c81 0x1>;
1924
1925			resets = <&gcc GCC_PCIE_1_BCR>;
1926			reset-names = "pci";
1927
1928			power-domains = <&gcc PCIE_1_GDSC>;
1929
1930			phys = <&pcie1_lane>;
1931			phy-names = "pciephy";
1932
1933			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
1934			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
1935
1936			pinctrl-names = "default";
1937			pinctrl-0 = <&pcie1_default_state>;
1938
1939			status = "disabled";
1940		};
1941
1942		pcie1_phy: phy@1c0f000 {
1943			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
1944			reg = <0 0x01c0f000 0 0x200>;
1945			#address-cells = <2>;
1946			#size-cells = <2>;
1947			ranges;
1948			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
1949				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1950				 <&gcc GCC_PCIE_1_CLKREF_EN>,
1951				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1952			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1953
1954			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
1955			reset-names = "phy";
1956
1957			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1958			assigned-clock-rates = <100000000>;
1959
1960			status = "disabled";
1961
1962			pcie1_lane: phy@1c0e000 {
1963				reg = <0 0x01c0e000 0 0x200>, /* tx */
1964				      <0 0x01c0e200 0 0x300>, /* rx */
1965				      <0 0x01c0f200 0 0x200>, /* pcs */
1966				      <0 0x01c0e800 0 0x200>, /* tx */
1967				      <0 0x01c0ea00 0 0x300>, /* rx */
1968				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
1969				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
1970				clock-names = "pipe0";
1971
1972				#clock-cells = <0>;
1973				#phy-cells = <0>;
1974				clock-output-names = "pcie_1_pipe_clk";
1975			};
1976		};
1977
1978		config_noc: interconnect@1500000 {
1979			compatible = "qcom,sm8450-config-noc";
1980			reg = <0 0x01500000 0 0x1c000>;
1981			#interconnect-cells = <2>;
1982			qcom,bcm-voters = <&apps_bcm_voter>;
1983		};
1984
1985		system_noc: interconnect@1680000 {
1986			compatible = "qcom,sm8450-system-noc";
1987			reg = <0 0x01680000 0 0x1e200>;
1988			#interconnect-cells = <2>;
1989			qcom,bcm-voters = <&apps_bcm_voter>;
1990		};
1991
1992		pcie_noc: interconnect@16c0000 {
1993			compatible = "qcom,sm8450-pcie-anoc";
1994			reg = <0 0x016c0000 0 0xe280>;
1995			#interconnect-cells = <2>;
1996			qcom,bcm-voters = <&apps_bcm_voter>;
1997		};
1998
1999		aggre1_noc: interconnect@16e0000 {
2000			compatible = "qcom,sm8450-aggre1-noc";
2001			reg = <0 0x016e0000 0 0x1c080>;
2002			#interconnect-cells = <2>;
2003			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2004				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
2005			qcom,bcm-voters = <&apps_bcm_voter>;
2006		};
2007
2008		aggre2_noc: interconnect@1700000 {
2009			compatible = "qcom,sm8450-aggre2-noc";
2010			reg = <0 0x01700000 0 0x31080>;
2011			#interconnect-cells = <2>;
2012			qcom,bcm-voters = <&apps_bcm_voter>;
2013			clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
2014				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
2015				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2016				 <&rpmhcc RPMH_IPA_CLK>;
2017		};
2018
2019		mmss_noc: interconnect@1740000 {
2020			compatible = "qcom,sm8450-mmss-noc";
2021			reg = <0 0x01740000 0 0x1f080>;
2022			#interconnect-cells = <2>;
2023			qcom,bcm-voters = <&apps_bcm_voter>;
2024		};
2025
2026		tcsr_mutex: hwlock@1f40000 {
2027			compatible = "qcom,tcsr-mutex";
2028			reg = <0x0 0x01f40000 0x0 0x40000>;
2029			#hwlock-cells = <1>;
2030		};
2031
2032		tcsr: syscon@1fc0000 {
2033			compatible = "qcom,sm8450-tcsr", "syscon";
2034			reg = <0x0 0x1fc0000 0x0 0x30000>;
2035		};
2036
2037		usb_1_hsphy: phy@88e3000 {
2038			compatible = "qcom,sm8450-usb-hs-phy",
2039				     "qcom,usb-snps-hs-7nm-phy";
2040			reg = <0 0x088e3000 0 0x400>;
2041			status = "disabled";
2042			#phy-cells = <0>;
2043
2044			clocks = <&rpmhcc RPMH_CXO_CLK>;
2045			clock-names = "ref";
2046
2047			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2048		};
2049
2050		usb_1_qmpphy: phy@88e8000 {
2051			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
2052			reg = <0 0x088e8000 0 0x3000>;
2053
2054			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2055				 <&rpmhcc RPMH_CXO_CLK>,
2056				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
2057				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2058			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
2059
2060			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2061				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
2062			reset-names = "phy", "common";
2063
2064			#clock-cells = <1>;
2065			#phy-cells = <1>;
2066
2067			status = "disabled";
2068
2069			ports {
2070				#address-cells = <1>;
2071				#size-cells = <0>;
2072
2073				port@0 {
2074					reg = <0>;
2075
2076					usb_1_qmpphy_out: endpoint {
2077					};
2078				};
2079
2080				port@1 {
2081					reg = <1>;
2082
2083					usb_1_qmpphy_usb_ss_in: endpoint {
2084					};
2085				};
2086
2087				port@2 {
2088					reg = <2>;
2089
2090					usb_1_qmpphy_dp_in: endpoint {
2091					};
2092				};
2093			};
2094		};
2095
2096		remoteproc_slpi: remoteproc@2400000 {
2097			compatible = "qcom,sm8450-slpi-pas";
2098			reg = <0 0x02400000 0 0x4000>;
2099
2100			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
2101					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2102					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2103					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2104					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2105			interrupt-names = "wdog", "fatal", "ready",
2106					  "handover", "stop-ack";
2107
2108			clocks = <&rpmhcc RPMH_CXO_CLK>;
2109			clock-names = "xo";
2110
2111			power-domains = <&rpmhpd RPMHPD_LCX>,
2112					<&rpmhpd RPMHPD_LMX>;
2113			power-domain-names = "lcx", "lmx";
2114
2115			memory-region = <&slpi_mem>;
2116
2117			qcom,qmp = <&aoss_qmp>;
2118
2119			qcom,smem-states = <&smp2p_slpi_out 0>;
2120			qcom,smem-state-names = "stop";
2121
2122			status = "disabled";
2123
2124			glink-edge {
2125				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2126							     IPCC_MPROC_SIGNAL_GLINK_QMP
2127							     IRQ_TYPE_EDGE_RISING>;
2128				mboxes = <&ipcc IPCC_CLIENT_SLPI
2129						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2130
2131				label = "slpi";
2132				qcom,remote-pid = <3>;
2133
2134				fastrpc {
2135					compatible = "qcom,fastrpc";
2136					qcom,glink-channels = "fastrpcglink-apps-dsp";
2137					label = "sdsp";
2138					#address-cells = <1>;
2139					#size-cells = <0>;
2140
2141					compute-cb@1 {
2142						compatible = "qcom,fastrpc-compute-cb";
2143						reg = <1>;
2144						iommus = <&apps_smmu 0x0541 0x0>;
2145					};
2146
2147					compute-cb@2 {
2148						compatible = "qcom,fastrpc-compute-cb";
2149						reg = <2>;
2150						iommus = <&apps_smmu 0x0542 0x0>;
2151					};
2152
2153					compute-cb@3 {
2154						compatible = "qcom,fastrpc-compute-cb";
2155						reg = <3>;
2156						iommus = <&apps_smmu 0x0543 0x0>;
2157						/* note: shared-cb = <4> in downstream */
2158					};
2159				};
2160			};
2161		};
2162
2163		wsa2macro: codec@31e0000 {
2164			compatible = "qcom,sm8450-lpass-wsa-macro";
2165			reg = <0 0x031e0000 0 0x1000>;
2166			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2167				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2168				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2169				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2170				 <&vamacro>;
2171			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2172			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2173					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2174			assigned-clock-rates = <19200000>, <19200000>;
2175
2176			#clock-cells = <0>;
2177			clock-output-names = "wsa2-mclk";
2178			pinctrl-names = "default";
2179			pinctrl-0 = <&wsa2_swr_active>;
2180			#sound-dai-cells = <1>;
2181		};
2182
2183		swr4: soundwire@31f0000 {
2184			compatible = "qcom,soundwire-v1.7.0";
2185			reg = <0 0x031f0000 0 0x2000>;
2186			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
2187			clocks = <&wsa2macro>;
2188			clock-names = "iface";
2189			label = "WSA2";
2190
2191			qcom,din-ports = <2>;
2192			qcom,dout-ports = <6>;
2193
2194			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2195			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2196			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2197			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2198			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2199			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2200			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
2201			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2202			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2203
2204			#address-cells = <2>;
2205			#size-cells = <0>;
2206			#sound-dai-cells = <1>;
2207			status = "disabled";
2208		};
2209
2210		rxmacro: codec@3200000 {
2211			compatible = "qcom,sm8450-lpass-rx-macro";
2212			reg = <0 0x03200000 0 0x1000>;
2213			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2214				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2215				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2216				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2217				 <&vamacro>;
2218			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2219
2220			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2221					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2222			assigned-clock-rates = <19200000>, <19200000>;
2223
2224			#clock-cells = <0>;
2225			clock-output-names = "mclk";
2226			pinctrl-names = "default";
2227			pinctrl-0 = <&rx_swr_active>;
2228			#sound-dai-cells = <1>;
2229		};
2230
2231		swr1: soundwire@3210000 {
2232			compatible = "qcom,soundwire-v1.7.0";
2233			reg = <0 0x03210000 0 0x2000>;
2234			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
2235			clocks = <&rxmacro>;
2236			clock-names = "iface";
2237			label = "RX";
2238			qcom,din-ports = <0>;
2239			qcom,dout-ports = <5>;
2240
2241			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
2242			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
2243			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
2244			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
2245			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
2246			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
2247			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
2248			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
2249			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
2250
2251			#address-cells = <2>;
2252			#size-cells = <0>;
2253			#sound-dai-cells = <1>;
2254			status = "disabled";
2255		};
2256
2257		txmacro: codec@3220000 {
2258			compatible = "qcom,sm8450-lpass-tx-macro";
2259			reg = <0 0x03220000 0 0x1000>;
2260			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2261				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2262				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2263				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2264				 <&vamacro>;
2265			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2266			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2267					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2268			assigned-clock-rates = <19200000>, <19200000>;
2269
2270			#clock-cells = <0>;
2271			clock-output-names = "mclk";
2272			pinctrl-names = "default";
2273			pinctrl-0 = <&tx_swr_active>;
2274			#sound-dai-cells = <1>;
2275		};
2276
2277		wsamacro: codec@3240000 {
2278			compatible = "qcom,sm8450-lpass-wsa-macro";
2279			reg = <0 0x03240000 0 0x1000>;
2280			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2281				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2282				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2283				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2284				 <&vamacro>;
2285			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2286
2287			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2288					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2289			assigned-clock-rates = <19200000>, <19200000>;
2290
2291			#clock-cells = <0>;
2292			clock-output-names = "mclk";
2293			pinctrl-names = "default";
2294			pinctrl-0 = <&wsa_swr_active>;
2295			#sound-dai-cells = <1>;
2296		};
2297
2298		swr0: soundwire@3250000 {
2299			compatible = "qcom,soundwire-v1.7.0";
2300			reg = <0 0x03250000 0 0x2000>;
2301			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
2302			clocks = <&wsamacro>;
2303			clock-names = "iface";
2304			label = "WSA";
2305
2306			qcom,din-ports = <2>;
2307			qcom,dout-ports = <6>;
2308
2309			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2310			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2311			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2312			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2313			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2314			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2315			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
2316			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2317			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2318
2319			#address-cells = <2>;
2320			#size-cells = <0>;
2321			#sound-dai-cells = <1>;
2322			status = "disabled";
2323		};
2324
2325		swr2: soundwire@33b0000 {
2326			compatible = "qcom,soundwire-v1.7.0";
2327			reg = <0 0x033b0000 0 0x2000>;
2328			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
2329				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
2330			interrupt-names = "core", "wakeup";
2331
2332			clocks = <&txmacro>;
2333			clock-names = "iface";
2334			label = "TX";
2335
2336			qcom,din-ports = <4>;
2337			qcom,dout-ports = <0>;
2338			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
2339			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
2340			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
2341			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2342			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2343			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2344			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2345			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2346			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
2347
2348			#address-cells = <2>;
2349			#size-cells = <0>;
2350			#sound-dai-cells = <1>;
2351			status = "disabled";
2352		};
2353
2354		vamacro: codec@33f0000 {
2355			compatible = "qcom,sm8450-lpass-va-macro";
2356			reg = <0 0x033f0000 0 0x1000>;
2357			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2358				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2359				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2360				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2361			clock-names = "mclk", "macro", "dcodec", "npl";
2362			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2363			assigned-clock-rates = <19200000>;
2364
2365			#clock-cells = <0>;
2366			clock-output-names = "fsgen";
2367			#sound-dai-cells = <1>;
2368			status = "disabled";
2369		};
2370
2371		remoteproc_adsp: remoteproc@30000000 {
2372			compatible = "qcom,sm8450-adsp-pas";
2373			reg = <0 0x30000000 0 0x100>;
2374
2375			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
2376					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
2377					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
2378					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
2379					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
2380			interrupt-names = "wdog", "fatal", "ready",
2381					  "handover", "stop-ack";
2382
2383			clocks = <&rpmhcc RPMH_CXO_CLK>;
2384			clock-names = "xo";
2385
2386			power-domains = <&rpmhpd RPMHPD_LCX>,
2387					<&rpmhpd RPMHPD_LMX>;
2388			power-domain-names = "lcx", "lmx";
2389
2390			memory-region = <&adsp_mem>;
2391
2392			qcom,qmp = <&aoss_qmp>;
2393
2394			qcom,smem-states = <&smp2p_adsp_out 0>;
2395			qcom,smem-state-names = "stop";
2396
2397			status = "disabled";
2398
2399			remoteproc_adsp_glink: glink-edge {
2400				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
2401							     IPCC_MPROC_SIGNAL_GLINK_QMP
2402							     IRQ_TYPE_EDGE_RISING>;
2403				mboxes = <&ipcc IPCC_CLIENT_LPASS
2404						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2405
2406				label = "lpass";
2407				qcom,remote-pid = <2>;
2408
2409				gpr {
2410					compatible = "qcom,gpr";
2411					qcom,glink-channels = "adsp_apps";
2412					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
2413					qcom,intents = <512 20>;
2414					#address-cells = <1>;
2415					#size-cells = <0>;
2416
2417					q6apm: service@1 {
2418						compatible = "qcom,q6apm";
2419						reg = <GPR_APM_MODULE_IID>;
2420						#sound-dai-cells = <0>;
2421						qcom,protection-domain = "avs/audio",
2422									 "msm/adsp/audio_pd";
2423
2424						q6apmdai: dais {
2425							compatible = "qcom,q6apm-dais";
2426							iommus = <&apps_smmu 0x1801 0x0>;
2427						};
2428
2429						q6apmbedai: bedais {
2430							compatible = "qcom,q6apm-lpass-dais";
2431							#sound-dai-cells = <1>;
2432						};
2433					};
2434
2435					q6prm: service@2 {
2436						compatible = "qcom,q6prm";
2437						reg = <GPR_PRM_MODULE_IID>;
2438						qcom,protection-domain = "avs/audio",
2439									 "msm/adsp/audio_pd";
2440
2441						q6prmcc: clock-controller {
2442							compatible = "qcom,q6prm-lpass-clocks";
2443							#clock-cells = <2>;
2444						};
2445					};
2446				};
2447
2448				fastrpc {
2449					compatible = "qcom,fastrpc";
2450					qcom,glink-channels = "fastrpcglink-apps-dsp";
2451					label = "adsp";
2452					#address-cells = <1>;
2453					#size-cells = <0>;
2454
2455					compute-cb@3 {
2456						compatible = "qcom,fastrpc-compute-cb";
2457						reg = <3>;
2458						iommus = <&apps_smmu 0x1803 0x0>;
2459					};
2460
2461					compute-cb@4 {
2462						compatible = "qcom,fastrpc-compute-cb";
2463						reg = <4>;
2464						iommus = <&apps_smmu 0x1804 0x0>;
2465					};
2466
2467					compute-cb@5 {
2468						compatible = "qcom,fastrpc-compute-cb";
2469						reg = <5>;
2470						iommus = <&apps_smmu 0x1805 0x0>;
2471					};
2472				};
2473			};
2474		};
2475
2476		remoteproc_cdsp: remoteproc@32300000 {
2477			compatible = "qcom,sm8450-cdsp-pas";
2478			reg = <0 0x32300000 0 0x1400000>;
2479
2480			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
2481					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2482					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2483					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2484					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2485			interrupt-names = "wdog", "fatal", "ready",
2486					  "handover", "stop-ack";
2487
2488			clocks = <&rpmhcc RPMH_CXO_CLK>;
2489			clock-names = "xo";
2490
2491			power-domains = <&rpmhpd RPMHPD_CX>,
2492					<&rpmhpd RPMHPD_MXC>;
2493			power-domain-names = "cx", "mxc";
2494
2495			memory-region = <&cdsp_mem>;
2496
2497			qcom,qmp = <&aoss_qmp>;
2498
2499			qcom,smem-states = <&smp2p_cdsp_out 0>;
2500			qcom,smem-state-names = "stop";
2501
2502			status = "disabled";
2503
2504			glink-edge {
2505				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2506							     IPCC_MPROC_SIGNAL_GLINK_QMP
2507							     IRQ_TYPE_EDGE_RISING>;
2508				mboxes = <&ipcc IPCC_CLIENT_CDSP
2509						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2510
2511				label = "cdsp";
2512				qcom,remote-pid = <5>;
2513
2514				fastrpc {
2515					compatible = "qcom,fastrpc";
2516					qcom,glink-channels = "fastrpcglink-apps-dsp";
2517					label = "cdsp";
2518					#address-cells = <1>;
2519					#size-cells = <0>;
2520
2521					compute-cb@1 {
2522						compatible = "qcom,fastrpc-compute-cb";
2523						reg = <1>;
2524						iommus = <&apps_smmu 0x2161 0x0400>,
2525							 <&apps_smmu 0x1021 0x1420>;
2526					};
2527
2528					compute-cb@2 {
2529						compatible = "qcom,fastrpc-compute-cb";
2530						reg = <2>;
2531						iommus = <&apps_smmu 0x2162 0x0400>,
2532							 <&apps_smmu 0x1022 0x1420>;
2533					};
2534
2535					compute-cb@3 {
2536						compatible = "qcom,fastrpc-compute-cb";
2537						reg = <3>;
2538						iommus = <&apps_smmu 0x2163 0x0400>,
2539							 <&apps_smmu 0x1023 0x1420>;
2540					};
2541
2542					compute-cb@4 {
2543						compatible = "qcom,fastrpc-compute-cb";
2544						reg = <4>;
2545						iommus = <&apps_smmu 0x2164 0x0400>,
2546							 <&apps_smmu 0x1024 0x1420>;
2547					};
2548
2549					compute-cb@5 {
2550						compatible = "qcom,fastrpc-compute-cb";
2551						reg = <5>;
2552						iommus = <&apps_smmu 0x2165 0x0400>,
2553							 <&apps_smmu 0x1025 0x1420>;
2554					};
2555
2556					compute-cb@6 {
2557						compatible = "qcom,fastrpc-compute-cb";
2558						reg = <6>;
2559						iommus = <&apps_smmu 0x2166 0x0400>,
2560							 <&apps_smmu 0x1026 0x1420>;
2561					};
2562
2563					compute-cb@7 {
2564						compatible = "qcom,fastrpc-compute-cb";
2565						reg = <7>;
2566						iommus = <&apps_smmu 0x2167 0x0400>,
2567							 <&apps_smmu 0x1027 0x1420>;
2568					};
2569
2570					compute-cb@8 {
2571						compatible = "qcom,fastrpc-compute-cb";
2572						reg = <8>;
2573						iommus = <&apps_smmu 0x2168 0x0400>,
2574							 <&apps_smmu 0x1028 0x1420>;
2575					};
2576
2577					/* note: secure cb9 in downstream */
2578				};
2579			};
2580		};
2581
2582		remoteproc_mpss: remoteproc@4080000 {
2583			compatible = "qcom,sm8450-mpss-pas";
2584			reg = <0x0 0x04080000 0x0 0x4040>;
2585
2586			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
2587					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
2588					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
2589					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
2590					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
2591					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
2592			interrupt-names = "wdog", "fatal", "ready", "handover",
2593					  "stop-ack", "shutdown-ack";
2594
2595			clocks = <&rpmhcc RPMH_CXO_CLK>;
2596			clock-names = "xo";
2597
2598			power-domains = <&rpmhpd RPMHPD_CX>,
2599					<&rpmhpd RPMHPD_MSS>;
2600			power-domain-names = "cx", "mss";
2601
2602			memory-region = <&mpss_mem>;
2603
2604			qcom,qmp = <&aoss_qmp>;
2605
2606			qcom,smem-states = <&smp2p_modem_out 0>;
2607			qcom,smem-state-names = "stop";
2608
2609			status = "disabled";
2610
2611			glink-edge {
2612				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2613							     IPCC_MPROC_SIGNAL_GLINK_QMP
2614							     IRQ_TYPE_EDGE_RISING>;
2615				mboxes = <&ipcc IPCC_CLIENT_MPSS
2616						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2617				label = "modem";
2618				qcom,remote-pid = <1>;
2619			};
2620		};
2621
2622		videocc: clock-controller@aaf0000 {
2623			compatible = "qcom,sm8450-videocc";
2624			reg = <0 0x0aaf0000 0 0x10000>;
2625			clocks = <&rpmhcc RPMH_CXO_CLK>,
2626				 <&gcc GCC_VIDEO_AHB_CLK>;
2627			power-domains = <&rpmhpd RPMHPD_MMCX>;
2628			required-opps = <&rpmhpd_opp_low_svs>;
2629			#clock-cells = <1>;
2630			#reset-cells = <1>;
2631			#power-domain-cells = <1>;
2632		};
2633
2634		cci0: cci@ac15000 {
2635			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
2636			reg = <0 0x0ac15000 0 0x1000>;
2637			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
2638			power-domains = <&camcc TITAN_TOP_GDSC>;
2639
2640			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2641				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
2642				 <&camcc CAM_CC_CPAS_AHB_CLK>,
2643				 <&camcc CAM_CC_CCI_0_CLK>,
2644				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
2645			clock-names = "camnoc_axi",
2646				      "slow_ahb_src",
2647				      "cpas_ahb",
2648				      "cci",
2649				      "cci_src";
2650			pinctrl-0 = <&cci0_default &cci1_default>;
2651			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
2652			pinctrl-names = "default", "sleep";
2653
2654			status = "disabled";
2655			#address-cells = <1>;
2656			#size-cells = <0>;
2657
2658			cci0_i2c0: i2c-bus@0 {
2659				reg = <0>;
2660				clock-frequency = <1000000>;
2661				#address-cells = <1>;
2662				#size-cells = <0>;
2663			};
2664
2665			cci0_i2c1: i2c-bus@1 {
2666				reg = <1>;
2667				clock-frequency = <1000000>;
2668				#address-cells = <1>;
2669				#size-cells = <0>;
2670			};
2671		};
2672
2673		cci1: cci@ac16000 {
2674			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
2675			reg = <0 0x0ac16000 0 0x1000>;
2676			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
2677			power-domains = <&camcc TITAN_TOP_GDSC>;
2678
2679			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2680				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
2681				 <&camcc CAM_CC_CPAS_AHB_CLK>,
2682				 <&camcc CAM_CC_CCI_1_CLK>,
2683				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
2684			clock-names = "camnoc_axi",
2685				      "slow_ahb_src",
2686				      "cpas_ahb",
2687				      "cci",
2688				      "cci_src";
2689			pinctrl-0 = <&cci2_default &cci3_default>;
2690			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
2691			pinctrl-names = "default", "sleep";
2692
2693			status = "disabled";
2694			#address-cells = <1>;
2695			#size-cells = <0>;
2696
2697			cci1_i2c0: i2c-bus@0 {
2698				reg = <0>;
2699				clock-frequency = <1000000>;
2700				#address-cells = <1>;
2701				#size-cells = <0>;
2702			};
2703
2704			cci1_i2c1: i2c-bus@1 {
2705				reg = <1>;
2706				clock-frequency = <1000000>;
2707				#address-cells = <1>;
2708				#size-cells = <0>;
2709			};
2710		};
2711
2712		camcc: clock-controller@ade0000 {
2713			compatible = "qcom,sm8450-camcc";
2714			reg = <0 0x0ade0000 0 0x20000>;
2715			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
2716				 <&rpmhcc RPMH_CXO_CLK>,
2717				 <&rpmhcc RPMH_CXO_CLK_A>,
2718				 <&sleep_clk>;
2719			power-domains = <&rpmhpd RPMHPD_MMCX>;
2720			required-opps = <&rpmhpd_opp_low_svs>;
2721			#clock-cells = <1>;
2722			#reset-cells = <1>;
2723			#power-domain-cells = <1>;
2724			status = "disabled";
2725		};
2726
2727		mdss: display-subsystem@ae00000 {
2728			compatible = "qcom,sm8450-mdss";
2729			reg = <0 0x0ae00000 0 0x1000>;
2730			reg-names = "mdss";
2731
2732			/* same path used twice */
2733			interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
2734					<&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
2735					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
2736					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
2737			interconnect-names = "mdp0-mem",
2738					     "mdp1-mem",
2739					     "cpu-cfg";
2740
2741			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
2742
2743			power-domains = <&dispcc MDSS_GDSC>;
2744
2745			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2746				 <&gcc GCC_DISP_HF_AXI_CLK>,
2747				 <&gcc GCC_DISP_SF_AXI_CLK>,
2748				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
2749
2750			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2751			interrupt-controller;
2752			#interrupt-cells = <1>;
2753
2754			iommus = <&apps_smmu 0x2800 0x402>;
2755
2756			#address-cells = <2>;
2757			#size-cells = <2>;
2758			ranges;
2759
2760			status = "disabled";
2761
2762			mdss_mdp: display-controller@ae01000 {
2763				compatible = "qcom,sm8450-dpu";
2764				reg = <0 0x0ae01000 0 0x8f000>,
2765				      <0 0x0aeb0000 0 0x2008>;
2766				reg-names = "mdp", "vbif";
2767
2768				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
2769					<&gcc GCC_DISP_SF_AXI_CLK>,
2770					<&dispcc DISP_CC_MDSS_AHB_CLK>,
2771					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
2772					<&dispcc DISP_CC_MDSS_MDP_CLK>,
2773					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2774				clock-names = "bus",
2775					      "nrt_bus",
2776					      "iface",
2777					      "lut",
2778					      "core",
2779					      "vsync";
2780
2781				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2782				assigned-clock-rates = <19200000>;
2783
2784				operating-points-v2 = <&mdp_opp_table>;
2785				power-domains = <&rpmhpd RPMHPD_MMCX>;
2786
2787				interrupt-parent = <&mdss>;
2788				interrupts = <0>;
2789
2790				ports {
2791					#address-cells = <1>;
2792					#size-cells = <0>;
2793
2794					port@0 {
2795						reg = <0>;
2796						dpu_intf1_out: endpoint {
2797							remote-endpoint = <&mdss_dsi0_in>;
2798						};
2799					};
2800
2801					port@1 {
2802						reg = <1>;
2803						dpu_intf2_out: endpoint {
2804							remote-endpoint = <&mdss_dsi1_in>;
2805						};
2806					};
2807
2808					port@2 {
2809						reg = <2>;
2810						dpu_intf0_out: endpoint {
2811							remote-endpoint = <&mdss_dp0_in>;
2812						};
2813					};
2814				};
2815
2816				mdp_opp_table: opp-table {
2817					compatible = "operating-points-v2";
2818
2819					opp-172000000 {
2820						opp-hz = /bits/ 64 <172000000>;
2821						required-opps = <&rpmhpd_opp_low_svs_d1>;
2822					};
2823
2824					opp-200000000 {
2825						opp-hz = /bits/ 64 <200000000>;
2826						required-opps = <&rpmhpd_opp_low_svs>;
2827					};
2828
2829					opp-325000000 {
2830						opp-hz = /bits/ 64 <325000000>;
2831						required-opps = <&rpmhpd_opp_svs>;
2832					};
2833
2834					opp-375000000 {
2835						opp-hz = /bits/ 64 <375000000>;
2836						required-opps = <&rpmhpd_opp_svs_l1>;
2837					};
2838
2839					opp-500000000 {
2840						opp-hz = /bits/ 64 <500000000>;
2841						required-opps = <&rpmhpd_opp_nom>;
2842					};
2843				};
2844			};
2845
2846			mdss_dp0: displayport-controller@ae90000 {
2847				compatible = "qcom,sm8450-dp", "qcom,sm8350-dp";
2848				reg = <0 0xae90000 0 0x200>,
2849				      <0 0xae90200 0 0x200>,
2850				      <0 0xae90400 0 0xc00>,
2851				      <0 0xae91000 0 0x400>,
2852				      <0 0xae91400 0 0x400>;
2853				interrupt-parent = <&mdss>;
2854				interrupts = <12>;
2855				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2856					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
2857					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
2858					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
2859					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
2860				clock-names = "core_iface",
2861					      "core_aux",
2862					      "ctrl_link",
2863					      "ctrl_link_iface",
2864					      "stream_pixel";
2865
2866				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
2867						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
2868				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2869							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
2870
2871				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
2872				phy-names = "dp";
2873
2874				#sound-dai-cells = <0>;
2875
2876				operating-points-v2 = <&dp_opp_table>;
2877				power-domains = <&rpmhpd RPMHPD_MMCX>;
2878
2879				status = "disabled";
2880
2881				ports {
2882					#address-cells = <1>;
2883					#size-cells = <0>;
2884
2885					port@0 {
2886						reg = <0>;
2887						mdss_dp0_in: endpoint {
2888							remote-endpoint = <&dpu_intf0_out>;
2889						};
2890					};
2891				};
2892
2893				dp_opp_table: opp-table {
2894					compatible = "operating-points-v2";
2895
2896					opp-160000000 {
2897						opp-hz = /bits/ 64 <160000000>;
2898						required-opps = <&rpmhpd_opp_low_svs>;
2899					};
2900
2901					opp-270000000 {
2902						opp-hz = /bits/ 64 <270000000>;
2903						required-opps = <&rpmhpd_opp_svs>;
2904					};
2905
2906					opp-540000000 {
2907						opp-hz = /bits/ 64 <540000000>;
2908						required-opps = <&rpmhpd_opp_svs_l1>;
2909					};
2910
2911					opp-810000000 {
2912						opp-hz = /bits/ 64 <810000000>;
2913						required-opps = <&rpmhpd_opp_nom>;
2914					};
2915				};
2916			};
2917
2918			mdss_dsi0: dsi@ae94000 {
2919				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2920				reg = <0 0x0ae94000 0 0x400>;
2921				reg-names = "dsi_ctrl";
2922
2923				interrupt-parent = <&mdss>;
2924				interrupts = <4>;
2925
2926				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
2927					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
2928					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
2929					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
2930					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2931					<&gcc GCC_DISP_HF_AXI_CLK>;
2932				clock-names = "byte",
2933					      "byte_intf",
2934					      "pixel",
2935					      "core",
2936					      "iface",
2937					      "bus";
2938
2939				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
2940				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
2941
2942				operating-points-v2 = <&mdss_dsi_opp_table>;
2943				power-domains = <&rpmhpd RPMHPD_MMCX>;
2944
2945				phys = <&mdss_dsi0_phy>;
2946				phy-names = "dsi";
2947
2948				#address-cells = <1>;
2949				#size-cells = <0>;
2950
2951				status = "disabled";
2952
2953				ports {
2954					#address-cells = <1>;
2955					#size-cells = <0>;
2956
2957					port@0 {
2958						reg = <0>;
2959						mdss_dsi0_in: endpoint {
2960							remote-endpoint = <&dpu_intf1_out>;
2961						};
2962					};
2963
2964					port@1 {
2965						reg = <1>;
2966						mdss_dsi0_out: endpoint {
2967						};
2968					};
2969				};
2970
2971				mdss_dsi_opp_table: opp-table {
2972					compatible = "operating-points-v2";
2973
2974					opp-187500000 {
2975						opp-hz = /bits/ 64 <187500000>;
2976						required-opps = <&rpmhpd_opp_low_svs>;
2977					};
2978
2979					opp-300000000 {
2980						opp-hz = /bits/ 64 <300000000>;
2981						required-opps = <&rpmhpd_opp_svs>;
2982					};
2983
2984					opp-358000000 {
2985						opp-hz = /bits/ 64 <358000000>;
2986						required-opps = <&rpmhpd_opp_svs_l1>;
2987					};
2988				};
2989			};
2990
2991			mdss_dsi0_phy: phy@ae94400 {
2992				compatible = "qcom,sm8450-dsi-phy-5nm";
2993				reg = <0 0x0ae94400 0 0x200>,
2994				      <0 0x0ae94600 0 0x280>,
2995				      <0 0x0ae94900 0 0x260>;
2996				reg-names = "dsi_phy",
2997					    "dsi_phy_lane",
2998					    "dsi_pll";
2999
3000				#clock-cells = <1>;
3001				#phy-cells = <0>;
3002
3003				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3004					 <&rpmhcc RPMH_CXO_CLK>;
3005				clock-names = "iface", "ref";
3006
3007				status = "disabled";
3008			};
3009
3010			mdss_dsi1: dsi@ae96000 {
3011				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
3012				reg = <0 0x0ae96000 0 0x400>;
3013				reg-names = "dsi_ctrl";
3014
3015				interrupt-parent = <&mdss>;
3016				interrupts = <5>;
3017
3018				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
3019					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
3020					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
3021					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
3022					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3023					 <&gcc GCC_DISP_HF_AXI_CLK>;
3024				clock-names = "byte",
3025					      "byte_intf",
3026					      "pixel",
3027					      "core",
3028					      "iface",
3029					      "bus";
3030
3031				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
3032				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
3033
3034				operating-points-v2 = <&mdss_dsi_opp_table>;
3035				power-domains = <&rpmhpd RPMHPD_MMCX>;
3036
3037				phys = <&mdss_dsi1_phy>;
3038				phy-names = "dsi";
3039
3040				#address-cells = <1>;
3041				#size-cells = <0>;
3042
3043				status = "disabled";
3044
3045				ports {
3046					#address-cells = <1>;
3047					#size-cells = <0>;
3048
3049					port@0 {
3050						reg = <0>;
3051						mdss_dsi1_in: endpoint {
3052							remote-endpoint = <&dpu_intf2_out>;
3053						};
3054					};
3055
3056					port@1 {
3057						reg = <1>;
3058						mdss_dsi1_out: endpoint {
3059						};
3060					};
3061				};
3062			};
3063
3064			mdss_dsi1_phy: phy@ae96400 {
3065				compatible = "qcom,sm8450-dsi-phy-5nm";
3066				reg = <0 0x0ae96400 0 0x200>,
3067				      <0 0x0ae96600 0 0x280>,
3068				      <0 0x0ae96900 0 0x260>;
3069				reg-names = "dsi_phy",
3070					    "dsi_phy_lane",
3071					    "dsi_pll";
3072
3073				#clock-cells = <1>;
3074				#phy-cells = <0>;
3075
3076				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3077					 <&rpmhcc RPMH_CXO_CLK>;
3078				clock-names = "iface", "ref";
3079
3080				status = "disabled";
3081			};
3082		};
3083
3084		dispcc: clock-controller@af00000 {
3085			compatible = "qcom,sm8450-dispcc";
3086			reg = <0 0x0af00000 0 0x20000>;
3087			clocks = <&rpmhcc RPMH_CXO_CLK>,
3088				 <&rpmhcc RPMH_CXO_CLK_A>,
3089				 <&gcc GCC_DISP_AHB_CLK>,
3090				 <&sleep_clk>,
3091				 <&mdss_dsi0_phy 0>,
3092				 <&mdss_dsi0_phy 1>,
3093				 <&mdss_dsi1_phy 0>,
3094				 <&mdss_dsi1_phy 1>,
3095				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
3096				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
3097				 <0>, /* dp1 */
3098				 <0>,
3099				 <0>, /* dp2 */
3100				 <0>,
3101				 <0>, /* dp3 */
3102				 <0>;
3103			power-domains = <&rpmhpd RPMHPD_MMCX>;
3104			required-opps = <&rpmhpd_opp_low_svs>;
3105			#clock-cells = <1>;
3106			#reset-cells = <1>;
3107			#power-domain-cells = <1>;
3108			status = "disabled";
3109		};
3110
3111		pdc: interrupt-controller@b220000 {
3112			compatible = "qcom,sm8450-pdc", "qcom,pdc";
3113			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
3114			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
3115					  <94 609 31>, <125 63 1>, <126 716 12>;
3116			#interrupt-cells = <2>;
3117			interrupt-parent = <&intc>;
3118			interrupt-controller;
3119		};
3120
3121		tsens0: thermal-sensor@c263000 {
3122			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
3123			reg = <0 0x0c263000 0 0x1000>, /* TM */
3124			      <0 0x0c222000 0 0x1000>; /* SROT */
3125			#qcom,sensors = <16>;
3126			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3127				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3128			interrupt-names = "uplow", "critical";
3129			#thermal-sensor-cells = <1>;
3130		};
3131
3132		tsens1: thermal-sensor@c265000 {
3133			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
3134			reg = <0 0x0c265000 0 0x1000>, /* TM */
3135			      <0 0x0c223000 0 0x1000>; /* SROT */
3136			#qcom,sensors = <16>;
3137			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3138				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3139			interrupt-names = "uplow", "critical";
3140			#thermal-sensor-cells = <1>;
3141		};
3142
3143		aoss_qmp: power-management@c300000 {
3144			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
3145			reg = <0 0x0c300000 0 0x400>;
3146			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
3147						     IRQ_TYPE_EDGE_RISING>;
3148			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
3149
3150			#clock-cells = <0>;
3151		};
3152
3153		sram@c3f0000 {
3154			compatible = "qcom,rpmh-stats";
3155			reg = <0 0x0c3f0000 0 0x400>;
3156		};
3157
3158		spmi_bus: spmi@c400000 {
3159			compatible = "qcom,spmi-pmic-arb";
3160			reg = <0 0x0c400000 0 0x00003000>,
3161			      <0 0x0c500000 0 0x00400000>,
3162			      <0 0x0c440000 0 0x00080000>,
3163			      <0 0x0c4c0000 0 0x00010000>,
3164			      <0 0x0c42d000 0 0x00010000>;
3165			reg-names = "core",
3166				    "chnls",
3167				    "obsrvr",
3168				    "intr",
3169				    "cnfg";
3170			interrupt-names = "periph_irq";
3171			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3172			qcom,ee = <0>;
3173			qcom,channel = <0>;
3174			interrupt-controller;
3175			#interrupt-cells = <4>;
3176			#address-cells = <2>;
3177			#size-cells = <0>;
3178		};
3179
3180		ipcc: mailbox@ed18000 {
3181			compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
3182			reg = <0 0x0ed18000 0 0x1000>;
3183			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
3184			interrupt-controller;
3185			#interrupt-cells = <3>;
3186			#mbox-cells = <2>;
3187		};
3188
3189		tlmm: pinctrl@f100000 {
3190			compatible = "qcom,sm8450-tlmm";
3191			reg = <0 0x0f100000 0 0x300000>;
3192			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3193			gpio-controller;
3194			#gpio-cells = <2>;
3195			interrupt-controller;
3196			#interrupt-cells = <2>;
3197			gpio-ranges = <&tlmm 0 0 211>;
3198			wakeup-parent = <&pdc>;
3199
3200			sdc2_default_state: sdc2-default-state {
3201				clk-pins {
3202					pins = "sdc2_clk";
3203					drive-strength = <16>;
3204					bias-disable;
3205				};
3206
3207				cmd-pins {
3208					pins = "sdc2_cmd";
3209					drive-strength = <16>;
3210					bias-pull-up;
3211				};
3212
3213				data-pins {
3214					pins = "sdc2_data";
3215					drive-strength = <16>;
3216					bias-pull-up;
3217				};
3218			};
3219
3220			sdc2_sleep_state: sdc2-sleep-state {
3221				clk-pins {
3222					pins = "sdc2_clk";
3223					drive-strength = <2>;
3224					bias-disable;
3225				};
3226
3227				cmd-pins {
3228					pins = "sdc2_cmd";
3229					drive-strength = <2>;
3230					bias-pull-up;
3231				};
3232
3233				data-pins {
3234					pins = "sdc2_data";
3235					drive-strength = <2>;
3236					bias-pull-up;
3237				};
3238			};
3239
3240			cci0_default: cci0-default-state {
3241				/* SDA, SCL */
3242				pins = "gpio110", "gpio111";
3243				function = "cci_i2c";
3244				drive-strength = <2>;
3245				bias-pull-up;
3246			};
3247
3248			cci0_sleep: cci0-sleep-state {
3249				/* SDA, SCL */
3250				pins = "gpio110", "gpio111";
3251				function = "cci_i2c";
3252				drive-strength = <2>;
3253				bias-pull-down;
3254			};
3255
3256			cci1_default: cci1-default-state {
3257				/* SDA, SCL */
3258				pins = "gpio112", "gpio113";
3259				function = "cci_i2c";
3260				drive-strength = <2>;
3261				bias-pull-up;
3262			};
3263
3264			cci1_sleep: cci1-sleep-state {
3265				/* SDA, SCL */
3266				pins = "gpio112", "gpio113";
3267				function = "cci_i2c";
3268				drive-strength = <2>;
3269				bias-pull-down;
3270			};
3271
3272			cci2_default: cci2-default-state {
3273				/* SDA, SCL */
3274				pins = "gpio114", "gpio115";
3275				function = "cci_i2c";
3276				drive-strength = <2>;
3277				bias-pull-up;
3278			};
3279
3280			cci2_sleep: cci2-sleep-state {
3281				/* SDA, SCL */
3282				pins = "gpio114", "gpio115";
3283				function = "cci_i2c";
3284				drive-strength = <2>;
3285				bias-pull-down;
3286			};
3287
3288			cci3_default: cci3-default-state {
3289				/* SDA, SCL */
3290				pins = "gpio208", "gpio209";
3291				function = "cci_i2c";
3292				drive-strength = <2>;
3293				bias-pull-up;
3294			};
3295
3296			cci3_sleep: cci3-sleep-state {
3297				/* SDA, SCL */
3298				pins = "gpio208", "gpio209";
3299				function = "cci_i2c";
3300				drive-strength = <2>;
3301				bias-pull-down;
3302			};
3303
3304			pcie0_default_state: pcie0-default-state {
3305				perst-pins {
3306					pins = "gpio94";
3307					function = "gpio";
3308					drive-strength = <2>;
3309					bias-pull-down;
3310				};
3311
3312				clkreq-pins {
3313					pins = "gpio95";
3314					function = "pcie0_clkreqn";
3315					drive-strength = <2>;
3316					bias-pull-up;
3317				};
3318
3319				wake-pins {
3320					pins = "gpio96";
3321					function = "gpio";
3322					drive-strength = <2>;
3323					bias-pull-up;
3324				};
3325			};
3326
3327			pcie1_default_state: pcie1-default-state {
3328				perst-pins {
3329					pins = "gpio97";
3330					function = "gpio";
3331					drive-strength = <2>;
3332					bias-pull-down;
3333				};
3334
3335				clkreq-pins {
3336					pins = "gpio98";
3337					function = "pcie1_clkreqn";
3338					drive-strength = <2>;
3339					bias-pull-up;
3340				};
3341
3342				wake-pins {
3343					pins = "gpio99";
3344					function = "gpio";
3345					drive-strength = <2>;
3346					bias-pull-up;
3347				};
3348			};
3349
3350			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
3351				pins = "gpio0", "gpio1";
3352				function = "qup0";
3353			};
3354
3355			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
3356				pins = "gpio4", "gpio5";
3357				function = "qup1";
3358			};
3359
3360			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
3361				pins = "gpio8", "gpio9";
3362				function = "qup2";
3363			};
3364
3365			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
3366				pins = "gpio12", "gpio13";
3367				function = "qup3";
3368			};
3369
3370			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
3371				pins = "gpio16", "gpio17";
3372				function = "qup4";
3373			};
3374
3375			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
3376				pins = "gpio206", "gpio207";
3377				function = "qup5";
3378			};
3379
3380			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
3381				pins = "gpio20", "gpio21";
3382				function = "qup6";
3383			};
3384
3385			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
3386				pins = "gpio28", "gpio29";
3387				function = "qup8";
3388			};
3389
3390			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
3391				pins = "gpio32", "gpio33";
3392				function = "qup9";
3393			};
3394
3395			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
3396				pins = "gpio36", "gpio37";
3397				function = "qup10";
3398			};
3399
3400			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
3401				pins = "gpio40", "gpio41";
3402				function = "qup11";
3403			};
3404
3405			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
3406				pins = "gpio44", "gpio45";
3407				function = "qup12";
3408			};
3409
3410			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
3411				pins = "gpio48", "gpio49";
3412				function = "qup13";
3413				drive-strength = <2>;
3414				bias-pull-up;
3415			};
3416
3417			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
3418				pins = "gpio52", "gpio53";
3419				function = "qup14";
3420				drive-strength = <2>;
3421				bias-pull-up;
3422			};
3423
3424			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
3425				pins = "gpio56", "gpio57";
3426				function = "qup15";
3427			};
3428
3429			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
3430				pins = "gpio60", "gpio61";
3431				function = "qup16";
3432			};
3433
3434			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
3435				pins = "gpio64", "gpio65";
3436				function = "qup17";
3437			};
3438
3439			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
3440				pins = "gpio68", "gpio69";
3441				function = "qup18";
3442			};
3443
3444			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
3445				pins = "gpio72", "gpio73";
3446				function = "qup19";
3447			};
3448
3449			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
3450				pins = "gpio76", "gpio77";
3451				function = "qup20";
3452			};
3453
3454			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
3455				pins = "gpio80", "gpio81";
3456				function = "qup21";
3457			};
3458
3459			qup_spi0_cs: qup-spi0-cs-state {
3460				pins = "gpio3";
3461				function = "qup0";
3462			};
3463
3464			qup_spi0_data_clk: qup-spi0-data-clk-state {
3465				pins = "gpio0", "gpio1", "gpio2";
3466				function = "qup0";
3467			};
3468
3469			qup_spi1_cs: qup-spi1-cs-state {
3470				pins = "gpio7";
3471				function = "qup1";
3472			};
3473
3474			qup_spi1_data_clk: qup-spi1-data-clk-state {
3475				pins = "gpio4", "gpio5", "gpio6";
3476				function = "qup1";
3477			};
3478
3479			qup_spi2_cs: qup-spi2-cs-state {
3480				pins = "gpio11";
3481				function = "qup2";
3482			};
3483
3484			qup_spi2_data_clk: qup-spi2-data-clk-state {
3485				pins = "gpio8", "gpio9", "gpio10";
3486				function = "qup2";
3487			};
3488
3489			qup_spi3_cs: qup-spi3-cs-state {
3490				pins = "gpio15";
3491				function = "qup3";
3492			};
3493
3494			qup_spi3_data_clk: qup-spi3-data-clk-state {
3495				pins = "gpio12", "gpio13", "gpio14";
3496				function = "qup3";
3497			};
3498
3499			qup_spi4_cs: qup-spi4-cs-state {
3500				pins = "gpio19";
3501				function = "qup4";
3502				drive-strength = <6>;
3503				bias-disable;
3504			};
3505
3506			qup_spi4_data_clk: qup-spi4-data-clk-state {
3507				pins = "gpio16", "gpio17", "gpio18";
3508				function = "qup4";
3509			};
3510
3511			qup_spi5_cs: qup-spi5-cs-state {
3512				pins = "gpio85";
3513				function = "qup5";
3514			};
3515
3516			qup_spi5_data_clk: qup-spi5-data-clk-state {
3517				pins = "gpio206", "gpio207", "gpio84";
3518				function = "qup5";
3519			};
3520
3521			qup_spi6_cs: qup-spi6-cs-state {
3522				pins = "gpio23";
3523				function = "qup6";
3524			};
3525
3526			qup_spi6_data_clk: qup-spi6-data-clk-state {
3527				pins = "gpio20", "gpio21", "gpio22";
3528				function = "qup6";
3529			};
3530
3531			qup_spi8_cs: qup-spi8-cs-state {
3532				pins = "gpio31";
3533				function = "qup8";
3534			};
3535
3536			qup_spi8_data_clk: qup-spi8-data-clk-state {
3537				pins = "gpio28", "gpio29", "gpio30";
3538				function = "qup8";
3539			};
3540
3541			qup_spi9_cs: qup-spi9-cs-state {
3542				pins = "gpio35";
3543				function = "qup9";
3544			};
3545
3546			qup_spi9_data_clk: qup-spi9-data-clk-state {
3547				pins = "gpio32", "gpio33", "gpio34";
3548				function = "qup9";
3549			};
3550
3551			qup_spi10_cs: qup-spi10-cs-state {
3552				pins = "gpio39";
3553				function = "qup10";
3554			};
3555
3556			qup_spi10_data_clk: qup-spi10-data-clk-state {
3557				pins = "gpio36", "gpio37", "gpio38";
3558				function = "qup10";
3559			};
3560
3561			qup_spi11_cs: qup-spi11-cs-state {
3562				pins = "gpio43";
3563				function = "qup11";
3564			};
3565
3566			qup_spi11_data_clk: qup-spi11-data-clk-state {
3567				pins = "gpio40", "gpio41", "gpio42";
3568				function = "qup11";
3569			};
3570
3571			qup_spi12_cs: qup-spi12-cs-state {
3572				pins = "gpio47";
3573				function = "qup12";
3574			};
3575
3576			qup_spi12_data_clk: qup-spi12-data-clk-state {
3577				pins = "gpio44", "gpio45", "gpio46";
3578				function = "qup12";
3579			};
3580
3581			qup_spi13_cs: qup-spi13-cs-state {
3582				pins = "gpio51";
3583				function = "qup13";
3584			};
3585
3586			qup_spi13_data_clk: qup-spi13-data-clk-state {
3587				pins = "gpio48", "gpio49", "gpio50";
3588				function = "qup13";
3589			};
3590
3591			qup_spi14_cs: qup-spi14-cs-state {
3592				pins = "gpio55";
3593				function = "qup14";
3594			};
3595
3596			qup_spi14_data_clk: qup-spi14-data-clk-state {
3597				pins = "gpio52", "gpio53", "gpio54";
3598				function = "qup14";
3599			};
3600
3601			qup_spi15_cs: qup-spi15-cs-state {
3602				pins = "gpio59";
3603				function = "qup15";
3604			};
3605
3606			qup_spi15_data_clk: qup-spi15-data-clk-state {
3607				pins = "gpio56", "gpio57", "gpio58";
3608				function = "qup15";
3609			};
3610
3611			qup_spi16_cs: qup-spi16-cs-state {
3612				pins = "gpio63";
3613				function = "qup16";
3614			};
3615
3616			qup_spi16_data_clk: qup-spi16-data-clk-state {
3617				pins = "gpio60", "gpio61", "gpio62";
3618				function = "qup16";
3619			};
3620
3621			qup_spi17_cs: qup-spi17-cs-state {
3622				pins = "gpio67";
3623				function = "qup17";
3624			};
3625
3626			qup_spi17_data_clk: qup-spi17-data-clk-state {
3627				pins = "gpio64", "gpio65", "gpio66";
3628				function = "qup17";
3629			};
3630
3631			qup_spi18_cs: qup-spi18-cs-state {
3632				pins = "gpio71";
3633				function = "qup18";
3634				drive-strength = <6>;
3635				bias-disable;
3636			};
3637
3638			qup_spi18_data_clk: qup-spi18-data-clk-state {
3639				pins = "gpio68", "gpio69", "gpio70";
3640				function = "qup18";
3641				drive-strength = <6>;
3642				bias-disable;
3643			};
3644
3645			qup_spi19_cs: qup-spi19-cs-state {
3646				pins = "gpio75";
3647				function = "qup19";
3648				drive-strength = <6>;
3649				bias-disable;
3650			};
3651
3652			qup_spi19_data_clk: qup-spi19-data-clk-state {
3653				pins = "gpio72", "gpio73", "gpio74";
3654				function = "qup19";
3655				drive-strength = <6>;
3656				bias-disable;
3657			};
3658
3659			qup_spi20_cs: qup-spi20-cs-state {
3660				pins = "gpio79";
3661				function = "qup20";
3662			};
3663
3664			qup_spi20_data_clk: qup-spi20-data-clk-state {
3665				pins = "gpio76", "gpio77", "gpio78";
3666				function = "qup20";
3667			};
3668
3669			qup_spi21_cs: qup-spi21-cs-state {
3670				pins = "gpio83";
3671				function = "qup21";
3672			};
3673
3674			qup_spi21_data_clk: qup-spi21-data-clk-state {
3675				pins = "gpio80", "gpio81", "gpio82";
3676				function = "qup21";
3677			};
3678
3679			qup_uart7_rx: qup-uart7-rx-state {
3680				pins = "gpio26";
3681				function = "qup7";
3682				drive-strength = <2>;
3683				bias-disable;
3684			};
3685
3686			qup_uart7_tx: qup-uart7-tx-state {
3687				pins = "gpio27";
3688				function = "qup7";
3689				drive-strength = <2>;
3690				bias-disable;
3691			};
3692
3693			qup_uart20_default: qup-uart20-default-state {
3694				pins = "gpio76", "gpio77", "gpio78", "gpio79";
3695				function = "qup20";
3696			};
3697		};
3698
3699		lpass_tlmm: pinctrl@3440000 {
3700			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
3701			reg = <0 0x03440000 0x0 0x20000>,
3702			      <0 0x034d0000 0x0 0x10000>;
3703			gpio-controller;
3704			#gpio-cells = <2>;
3705			gpio-ranges = <&lpass_tlmm 0 0 23>;
3706
3707			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
3708				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
3709			clock-names = "core", "audio";
3710
3711			tx_swr_active: tx-swr-active-state {
3712				clk-pins {
3713					pins = "gpio0";
3714					function = "swr_tx_clk";
3715					drive-strength = <2>;
3716					slew-rate = <1>;
3717					bias-disable;
3718				};
3719
3720				data-pins {
3721					pins = "gpio1", "gpio2", "gpio14";
3722					function = "swr_tx_data";
3723					drive-strength = <2>;
3724					slew-rate = <1>;
3725					bias-bus-hold;
3726				};
3727			};
3728
3729			rx_swr_active: rx-swr-active-state {
3730				clk-pins {
3731					pins = "gpio3";
3732					function = "swr_rx_clk";
3733					drive-strength = <2>;
3734					slew-rate = <1>;
3735					bias-disable;
3736				};
3737
3738				data-pins {
3739					pins = "gpio4", "gpio5";
3740					function = "swr_rx_data";
3741					drive-strength = <2>;
3742					slew-rate = <1>;
3743					bias-bus-hold;
3744				};
3745			};
3746
3747			dmic01_default: dmic01-default-state {
3748				clk-pins {
3749					pins = "gpio6";
3750					function = "dmic1_clk";
3751					drive-strength = <8>;
3752					output-high;
3753				};
3754
3755				data-pins {
3756					pins = "gpio7";
3757					function = "dmic1_data";
3758					drive-strength = <8>;
3759				};
3760			};
3761
3762			dmic02_default: dmic02-default-state {
3763				clk-pins {
3764					pins = "gpio8";
3765					function = "dmic2_clk";
3766					drive-strength = <8>;
3767					output-high;
3768				};
3769
3770				data-pins {
3771					pins = "gpio9";
3772					function = "dmic2_data";
3773					drive-strength = <8>;
3774				};
3775			};
3776
3777			wsa_swr_active: wsa-swr-active-state {
3778				clk-pins {
3779					pins = "gpio10";
3780					function = "wsa_swr_clk";
3781					drive-strength = <2>;
3782					slew-rate = <1>;
3783					bias-disable;
3784				};
3785
3786				data-pins {
3787					pins = "gpio11";
3788					function = "wsa_swr_data";
3789					drive-strength = <2>;
3790					slew-rate = <1>;
3791					bias-bus-hold;
3792				};
3793			};
3794
3795			wsa2_swr_active: wsa2-swr-active-state {
3796				clk-pins {
3797					pins = "gpio15";
3798					function = "wsa2_swr_clk";
3799					drive-strength = <2>;
3800					slew-rate = <1>;
3801					bias-disable;
3802				};
3803
3804				data-pins {
3805					pins = "gpio16";
3806					function = "wsa2_swr_data";
3807					drive-strength = <2>;
3808					slew-rate = <1>;
3809					bias-bus-hold;
3810				};
3811			};
3812		};
3813
3814		sram@146aa000 {
3815			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
3816			reg = <0 0x146aa000 0 0x1000>;
3817			ranges = <0 0 0x146aa000 0x1000>;
3818
3819			#address-cells = <1>;
3820			#size-cells = <1>;
3821
3822			pil-reloc@94c {
3823				compatible = "qcom,pil-reloc-info";
3824				reg = <0x94c 0xc8>;
3825			};
3826		};
3827
3828		apps_smmu: iommu@15000000 {
3829			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
3830			reg = <0 0x15000000 0 0x100000>;
3831			#iommu-cells = <2>;
3832			#global-interrupts = <1>;
3833			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3834				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3835				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3836				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3837				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3838				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3839				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3840				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3841				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3842				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3843				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3844				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3845				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3846				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3847				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3848				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3849				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3850				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3851				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3852				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3853				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3854				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3855				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3856				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3857				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3858				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3859				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3860				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3861				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3862				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3863				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3864				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3865				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3866				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3867				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3868				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3869				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3870				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3871				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3872				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3873				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3874				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3875				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3876				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3877				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3878				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3879				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3880				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3881				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3882				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3883				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3884				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3885				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3886				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3887				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3888				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3889				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3890				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3891				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3892				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3893				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3894				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3895				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3896				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3897				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3898				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3899				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
3900				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
3901				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
3902				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
3903				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
3904				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
3905				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3906				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3907				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3908				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3909				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3910				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3911				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3912				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3913				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3914				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3915				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3916				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
3917				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3918				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
3919				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3920				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3921				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
3922				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
3923				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
3924				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
3925				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
3926				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
3927				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
3928				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
3929				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
3930		};
3931
3932		intc: interrupt-controller@17100000 {
3933			compatible = "arm,gic-v3";
3934			#interrupt-cells = <3>;
3935			interrupt-controller;
3936			#redistributor-regions = <1>;
3937			redistributor-stride = <0x0 0x40000>;
3938			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
3939			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
3940			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3941			#address-cells = <2>;
3942			#size-cells = <2>;
3943			ranges;
3944
3945			gic_its: msi-controller@17140000 {
3946				compatible = "arm,gic-v3-its";
3947				reg = <0x0 0x17140000 0x0 0x20000>;
3948				msi-controller;
3949				#msi-cells = <1>;
3950			};
3951		};
3952
3953		timer@17420000 {
3954			compatible = "arm,armv7-timer-mem";
3955			#address-cells = <1>;
3956			#size-cells = <1>;
3957			ranges = <0 0 0 0x20000000>;
3958			reg = <0x0 0x17420000 0x0 0x1000>;
3959			clock-frequency = <19200000>;
3960
3961			frame@17421000 {
3962				frame-number = <0>;
3963				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3964					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3965				reg = <0x17421000 0x1000>,
3966				      <0x17422000 0x1000>;
3967			};
3968
3969			frame@17423000 {
3970				frame-number = <1>;
3971				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3972				reg = <0x17423000 0x1000>;
3973				status = "disabled";
3974			};
3975
3976			frame@17425000 {
3977				frame-number = <2>;
3978				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3979				reg = <0x17425000 0x1000>;
3980				status = "disabled";
3981			};
3982
3983			frame@17427000 {
3984				frame-number = <3>;
3985				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3986				reg = <0x17427000 0x1000>;
3987				status = "disabled";
3988			};
3989
3990			frame@17429000 {
3991				frame-number = <4>;
3992				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3993				reg = <0x17429000 0x1000>;
3994				status = "disabled";
3995			};
3996
3997			frame@1742b000 {
3998				frame-number = <5>;
3999				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
4000				reg = <0x1742b000 0x1000>;
4001				status = "disabled";
4002			};
4003
4004			frame@1742d000 {
4005				frame-number = <6>;
4006				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
4007				reg = <0x1742d000 0x1000>;
4008				status = "disabled";
4009			};
4010		};
4011
4012		apps_rsc: rsc@17a00000 {
4013			label = "apps_rsc";
4014			compatible = "qcom,rpmh-rsc";
4015			reg = <0x0 0x17a00000 0x0 0x10000>,
4016			      <0x0 0x17a10000 0x0 0x10000>,
4017			      <0x0 0x17a20000 0x0 0x10000>,
4018			      <0x0 0x17a30000 0x0 0x10000>;
4019			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
4020			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
4021				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
4022				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
4023			qcom,tcs-offset = <0xd00>;
4024			qcom,drv-id = <2>;
4025			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
4026					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
4027			power-domains = <&CLUSTER_PD>;
4028
4029			apps_bcm_voter: bcm-voter {
4030				compatible = "qcom,bcm-voter";
4031			};
4032
4033			rpmhcc: clock-controller {
4034				compatible = "qcom,sm8450-rpmh-clk";
4035				#clock-cells = <1>;
4036				clock-names = "xo";
4037				clocks = <&xo_board>;
4038			};
4039
4040			rpmhpd: power-controller {
4041				compatible = "qcom,sm8450-rpmhpd";
4042				#power-domain-cells = <1>;
4043				operating-points-v2 = <&rpmhpd_opp_table>;
4044
4045				rpmhpd_opp_table: opp-table {
4046					compatible = "operating-points-v2";
4047
4048					rpmhpd_opp_ret: opp1 {
4049						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
4050					};
4051
4052					rpmhpd_opp_min_svs: opp2 {
4053						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
4054					};
4055
4056					rpmhpd_opp_low_svs_d1: opp3 {
4057						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
4058					};
4059
4060					rpmhpd_opp_low_svs: opp4 {
4061						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
4062					};
4063
4064					rpmhpd_opp_low_svs_l1: opp5 {
4065						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
4066					};
4067
4068					rpmhpd_opp_svs: opp6 {
4069						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
4070					};
4071
4072					rpmhpd_opp_svs_l0: opp7 {
4073						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
4074					};
4075
4076					rpmhpd_opp_svs_l1: opp8 {
4077						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
4078					};
4079
4080					rpmhpd_opp_svs_l2: opp9 {
4081						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
4082					};
4083
4084					rpmhpd_opp_nom: opp10 {
4085						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
4086					};
4087
4088					rpmhpd_opp_nom_l1: opp11 {
4089						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
4090					};
4091
4092					rpmhpd_opp_nom_l2: opp12 {
4093						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
4094					};
4095
4096					rpmhpd_opp_turbo: opp13 {
4097						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
4098					};
4099
4100					rpmhpd_opp_turbo_l1: opp14 {
4101						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
4102					};
4103				};
4104			};
4105		};
4106
4107		cpufreq_hw: cpufreq@17d91000 {
4108			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
4109			reg = <0 0x17d91000 0 0x1000>,
4110			      <0 0x17d92000 0 0x1000>,
4111			      <0 0x17d93000 0 0x1000>;
4112			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
4113			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
4114			clock-names = "xo", "alternate";
4115			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
4116				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
4117				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
4118			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
4119			#freq-domain-cells = <1>;
4120			#clock-cells = <1>;
4121		};
4122
4123		gem_noc: interconnect@19100000 {
4124			compatible = "qcom,sm8450-gem-noc";
4125			reg = <0 0x19100000 0 0xbb800>;
4126			#interconnect-cells = <2>;
4127			qcom,bcm-voters = <&apps_bcm_voter>;
4128		};
4129
4130		system-cache-controller@19200000 {
4131			compatible = "qcom,sm8450-llcc";
4132			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
4133			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
4134			      <0 0x19a00000 0 0x80000>;
4135			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
4136				    "llcc3_base", "llcc_broadcast_base";
4137			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
4138		};
4139
4140		ufs_mem_hc: ufshc@1d84000 {
4141			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
4142				     "jedec,ufs-2.0";
4143			reg = <0 0x01d84000 0 0x3000>;
4144			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
4145			phys = <&ufs_mem_phy_lanes>;
4146			phy-names = "ufsphy";
4147			lanes-per-direction = <2>;
4148			#reset-cells = <1>;
4149			resets = <&gcc GCC_UFS_PHY_BCR>;
4150			reset-names = "rst";
4151
4152			power-domains = <&gcc UFS_PHY_GDSC>;
4153
4154			iommus = <&apps_smmu 0xe0 0x0>;
4155			dma-coherent;
4156
4157			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
4158					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
4159			interconnect-names = "ufs-ddr", "cpu-ufs";
4160			clock-names =
4161				"core_clk",
4162				"bus_aggr_clk",
4163				"iface_clk",
4164				"core_clk_unipro",
4165				"ref_clk",
4166				"tx_lane0_sync_clk",
4167				"rx_lane0_sync_clk",
4168				"rx_lane1_sync_clk";
4169			clocks =
4170				<&gcc GCC_UFS_PHY_AXI_CLK>,
4171				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
4172				<&gcc GCC_UFS_PHY_AHB_CLK>,
4173				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
4174				<&rpmhcc RPMH_CXO_CLK>,
4175				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
4176				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
4177				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
4178			freq-table-hz =
4179				<75000000 300000000>,
4180				<0 0>,
4181				<0 0>,
4182				<75000000 300000000>,
4183				<75000000 300000000>,
4184				<0 0>,
4185				<0 0>,
4186				<0 0>;
4187			qcom,ice = <&ice>;
4188
4189			status = "disabled";
4190		};
4191
4192		ufs_mem_phy: phy@1d87000 {
4193			compatible = "qcom,sm8450-qmp-ufs-phy";
4194			reg = <0 0x01d87000 0 0x1c4>;
4195			#address-cells = <2>;
4196			#size-cells = <2>;
4197			ranges;
4198			clock-names = "ref", "ref_aux", "qref";
4199			clocks = <&rpmhcc RPMH_CXO_CLK>,
4200				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
4201				 <&gcc GCC_UFS_0_CLKREF_EN>;
4202
4203			power-domains = <&gcc UFS_PHY_GDSC>;
4204
4205			resets = <&ufs_mem_hc 0>;
4206			reset-names = "ufsphy";
4207			status = "disabled";
4208
4209			ufs_mem_phy_lanes: phy@1d87400 {
4210				reg = <0 0x01d87400 0 0x188>,
4211				      <0 0x01d87600 0 0x200>,
4212				      <0 0x01d87c00 0 0x200>,
4213				      <0 0x01d87800 0 0x188>,
4214				      <0 0x01d87a00 0 0x200>;
4215				#clock-cells = <1>;
4216				#phy-cells = <0>;
4217			};
4218		};
4219
4220		ice: crypto@1d88000 {
4221			compatible = "qcom,sm8450-inline-crypto-engine",
4222				     "qcom,inline-crypto-engine";
4223			reg = <0 0x01d88000 0 0x8000>;
4224			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
4225		};
4226
4227		cryptobam: dma-controller@1dc4000 {
4228			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
4229			reg = <0 0x01dc4000 0 0x28000>;
4230			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
4231			#dma-cells = <1>;
4232			qcom,ee = <0>;
4233			qcom,controlled-remotely;
4234			iommus = <&apps_smmu 0x584 0x11>,
4235				 <&apps_smmu 0x588 0x0>,
4236				 <&apps_smmu 0x598 0x5>,
4237				 <&apps_smmu 0x59a 0x0>,
4238				 <&apps_smmu 0x59f 0x0>;
4239		};
4240
4241		crypto: crypto@1dfa000 {
4242			compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
4243			reg = <0 0x01dfa000 0 0x6000>;
4244			dmas = <&cryptobam 4>, <&cryptobam 5>;
4245			dma-names = "rx", "tx";
4246			iommus = <&apps_smmu 0x584 0x11>,
4247				 <&apps_smmu 0x588 0x0>,
4248				 <&apps_smmu 0x598 0x5>,
4249				 <&apps_smmu 0x59a 0x0>,
4250				 <&apps_smmu 0x59f 0x0>;
4251			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
4252			interconnect-names = "memory";
4253		};
4254
4255		sdhc_2: mmc@8804000 {
4256			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
4257			reg = <0 0x08804000 0 0x1000>;
4258
4259			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
4260				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
4261			interrupt-names = "hc_irq", "pwr_irq";
4262
4263			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
4264				 <&gcc GCC_SDCC2_APPS_CLK>,
4265				 <&rpmhcc RPMH_CXO_CLK>;
4266			clock-names = "iface", "core", "xo";
4267			resets = <&gcc GCC_SDCC2_BCR>;
4268			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
4269					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
4270			interconnect-names = "sdhc-ddr","cpu-sdhc";
4271			iommus = <&apps_smmu 0x4a0 0x0>;
4272			power-domains = <&rpmhpd RPMHPD_CX>;
4273			operating-points-v2 = <&sdhc2_opp_table>;
4274			bus-width = <4>;
4275			dma-coherent;
4276
4277			/* Forbid SDR104/SDR50 - broken hw! */
4278			sdhci-caps-mask = <0x3 0x0>;
4279
4280			status = "disabled";
4281
4282			sdhc2_opp_table: opp-table {
4283				compatible = "operating-points-v2";
4284
4285				opp-100000000 {
4286					opp-hz = /bits/ 64 <100000000>;
4287					required-opps = <&rpmhpd_opp_low_svs>;
4288				};
4289
4290				opp-202000000 {
4291					opp-hz = /bits/ 64 <202000000>;
4292					required-opps = <&rpmhpd_opp_svs_l1>;
4293				};
4294			};
4295		};
4296
4297		usb_1: usb@a6f8800 {
4298			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
4299			reg = <0 0x0a6f8800 0 0x400>;
4300			status = "disabled";
4301			#address-cells = <2>;
4302			#size-cells = <2>;
4303			ranges;
4304
4305			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
4306				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
4307				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
4308				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
4309				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
4310				 <&gcc GCC_USB3_0_CLKREF_EN>;
4311			clock-names = "cfg_noc",
4312				      "core",
4313				      "iface",
4314				      "sleep",
4315				      "mock_utmi",
4316				      "xo";
4317
4318			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
4319					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
4320			assigned-clock-rates = <19200000>, <200000000>;
4321
4322			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
4323					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
4324					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
4325					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
4326			interrupt-names = "hs_phy_irq",
4327					  "ss_phy_irq",
4328					  "dm_hs_phy_irq",
4329					  "dp_hs_phy_irq";
4330
4331			power-domains = <&gcc USB30_PRIM_GDSC>;
4332
4333			resets = <&gcc GCC_USB30_PRIM_BCR>;
4334
4335			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
4336					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
4337			interconnect-names = "usb-ddr", "apps-usb";
4338
4339			usb_1_dwc3: usb@a600000 {
4340				compatible = "snps,dwc3";
4341				reg = <0 0x0a600000 0 0xcd00>;
4342				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
4343				iommus = <&apps_smmu 0x0 0x0>;
4344				snps,dis_u2_susphy_quirk;
4345				snps,dis_enblslpm_quirk;
4346				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
4347				phy-names = "usb2-phy", "usb3-phy";
4348
4349				ports {
4350					#address-cells = <1>;
4351					#size-cells = <0>;
4352
4353					port@0 {
4354						reg = <0>;
4355
4356						usb_1_dwc3_hs: endpoint {
4357						};
4358					};
4359
4360					port@1 {
4361						reg = <1>;
4362
4363						usb_1_dwc3_ss: endpoint {
4364						};
4365					};
4366				};
4367			};
4368		};
4369
4370		nsp_noc: interconnect@320c0000 {
4371			compatible = "qcom,sm8450-nsp-noc";
4372			reg = <0 0x320c0000 0 0x10000>;
4373			#interconnect-cells = <2>;
4374			qcom,bcm-voters = <&apps_bcm_voter>;
4375		};
4376
4377		lpass_ag_noc: interconnect@3c40000 {
4378			compatible = "qcom,sm8450-lpass-ag-noc";
4379			reg = <0 0x03c40000 0 0x17200>;
4380			#interconnect-cells = <2>;
4381			qcom,bcm-voters = <&apps_bcm_voter>;
4382		};
4383	};
4384
4385	sound: sound {
4386	};
4387
4388	thermal-zones {
4389		aoss0-thermal {
4390			polling-delay-passive = <0>;
4391			polling-delay = <0>;
4392			thermal-sensors = <&tsens0 0>;
4393
4394			trips {
4395				thermal-engine-config {
4396					temperature = <125000>;
4397					hysteresis = <1000>;
4398					type = "passive";
4399				};
4400
4401				reset-mon-cfg {
4402					temperature = <115000>;
4403					hysteresis = <5000>;
4404					type = "passive";
4405				};
4406			};
4407		};
4408
4409		cpuss0-thermal {
4410			polling-delay-passive = <0>;
4411			polling-delay = <0>;
4412			thermal-sensors = <&tsens0 1>;
4413
4414			trips {
4415				thermal-engine-config {
4416					temperature = <125000>;
4417					hysteresis = <1000>;
4418					type = "passive";
4419				};
4420
4421				reset-mon-cfg {
4422					temperature = <115000>;
4423					hysteresis = <5000>;
4424					type = "passive";
4425				};
4426			};
4427		};
4428
4429		cpuss1-thermal {
4430			polling-delay-passive = <0>;
4431			polling-delay = <0>;
4432			thermal-sensors = <&tsens0 2>;
4433
4434			trips {
4435				thermal-engine-config {
4436					temperature = <125000>;
4437					hysteresis = <1000>;
4438					type = "passive";
4439				};
4440
4441				reset-mon-cfg {
4442					temperature = <115000>;
4443					hysteresis = <5000>;
4444					type = "passive";
4445				};
4446			};
4447		};
4448
4449		cpuss3-thermal {
4450			polling-delay-passive = <0>;
4451			polling-delay = <0>;
4452			thermal-sensors = <&tsens0 3>;
4453
4454			trips {
4455				thermal-engine-config {
4456					temperature = <125000>;
4457					hysteresis = <1000>;
4458					type = "passive";
4459				};
4460
4461				reset-mon-cfg {
4462					temperature = <115000>;
4463					hysteresis = <5000>;
4464					type = "passive";
4465				};
4466			};
4467		};
4468
4469		cpuss4-thermal {
4470			polling-delay-passive = <0>;
4471			polling-delay = <0>;
4472			thermal-sensors = <&tsens0 4>;
4473
4474			trips {
4475				thermal-engine-config {
4476					temperature = <125000>;
4477					hysteresis = <1000>;
4478					type = "passive";
4479				};
4480
4481				reset-mon-cfg {
4482					temperature = <115000>;
4483					hysteresis = <5000>;
4484					type = "passive";
4485				};
4486			};
4487		};
4488
4489		cpu4-top-thermal {
4490			polling-delay-passive = <0>;
4491			polling-delay = <0>;
4492			thermal-sensors = <&tsens0 5>;
4493
4494			trips {
4495				cpu4_top_alert0: trip-point0 {
4496					temperature = <90000>;
4497					hysteresis = <2000>;
4498					type = "passive";
4499				};
4500
4501				cpu4_top_alert1: trip-point1 {
4502					temperature = <95000>;
4503					hysteresis = <2000>;
4504					type = "passive";
4505				};
4506
4507				cpu4_top_crit: cpu-crit {
4508					temperature = <110000>;
4509					hysteresis = <1000>;
4510					type = "critical";
4511				};
4512			};
4513		};
4514
4515		cpu4-bottom-thermal {
4516			polling-delay-passive = <0>;
4517			polling-delay = <0>;
4518			thermal-sensors = <&tsens0 6>;
4519
4520			trips {
4521				cpu4_bottom_alert0: trip-point0 {
4522					temperature = <90000>;
4523					hysteresis = <2000>;
4524					type = "passive";
4525				};
4526
4527				cpu4_bottom_alert1: trip-point1 {
4528					temperature = <95000>;
4529					hysteresis = <2000>;
4530					type = "passive";
4531				};
4532
4533				cpu4_bottom_crit: cpu-crit {
4534					temperature = <110000>;
4535					hysteresis = <1000>;
4536					type = "critical";
4537				};
4538			};
4539		};
4540
4541		cpu5-top-thermal {
4542			polling-delay-passive = <0>;
4543			polling-delay = <0>;
4544			thermal-sensors = <&tsens0 7>;
4545
4546			trips {
4547				cpu5_top_alert0: trip-point0 {
4548					temperature = <90000>;
4549					hysteresis = <2000>;
4550					type = "passive";
4551				};
4552
4553				cpu5_top_alert1: trip-point1 {
4554					temperature = <95000>;
4555					hysteresis = <2000>;
4556					type = "passive";
4557				};
4558
4559				cpu5_top_crit: cpu-crit {
4560					temperature = <110000>;
4561					hysteresis = <1000>;
4562					type = "critical";
4563				};
4564			};
4565		};
4566
4567		cpu5-bottom-thermal {
4568			polling-delay-passive = <0>;
4569			polling-delay = <0>;
4570			thermal-sensors = <&tsens0 8>;
4571
4572			trips {
4573				cpu5_bottom_alert0: trip-point0 {
4574					temperature = <90000>;
4575					hysteresis = <2000>;
4576					type = "passive";
4577				};
4578
4579				cpu5_bottom_alert1: trip-point1 {
4580					temperature = <95000>;
4581					hysteresis = <2000>;
4582					type = "passive";
4583				};
4584
4585				cpu5_bottom_crit: cpu-crit {
4586					temperature = <110000>;
4587					hysteresis = <1000>;
4588					type = "critical";
4589				};
4590			};
4591		};
4592
4593		cpu6-top-thermal {
4594			polling-delay-passive = <0>;
4595			polling-delay = <0>;
4596			thermal-sensors = <&tsens0 9>;
4597
4598			trips {
4599				cpu6_top_alert0: trip-point0 {
4600					temperature = <90000>;
4601					hysteresis = <2000>;
4602					type = "passive";
4603				};
4604
4605				cpu6_top_alert1: trip-point1 {
4606					temperature = <95000>;
4607					hysteresis = <2000>;
4608					type = "passive";
4609				};
4610
4611				cpu6_top_crit: cpu-crit {
4612					temperature = <110000>;
4613					hysteresis = <1000>;
4614					type = "critical";
4615				};
4616			};
4617		};
4618
4619		cpu6-bottom-thermal {
4620			polling-delay-passive = <0>;
4621			polling-delay = <0>;
4622			thermal-sensors = <&tsens0 10>;
4623
4624			trips {
4625				cpu6_bottom_alert0: trip-point0 {
4626					temperature = <90000>;
4627					hysteresis = <2000>;
4628					type = "passive";
4629				};
4630
4631				cpu6_bottom_alert1: trip-point1 {
4632					temperature = <95000>;
4633					hysteresis = <2000>;
4634					type = "passive";
4635				};
4636
4637				cpu6_bottom_crit: cpu-crit {
4638					temperature = <110000>;
4639					hysteresis = <1000>;
4640					type = "critical";
4641				};
4642			};
4643		};
4644
4645		cpu7-top-thermal {
4646			polling-delay-passive = <0>;
4647			polling-delay = <0>;
4648			thermal-sensors = <&tsens0 11>;
4649
4650			trips {
4651				cpu7_top_alert0: trip-point0 {
4652					temperature = <90000>;
4653					hysteresis = <2000>;
4654					type = "passive";
4655				};
4656
4657				cpu7_top_alert1: trip-point1 {
4658					temperature = <95000>;
4659					hysteresis = <2000>;
4660					type = "passive";
4661				};
4662
4663				cpu7_top_crit: cpu-crit {
4664					temperature = <110000>;
4665					hysteresis = <1000>;
4666					type = "critical";
4667				};
4668			};
4669		};
4670
4671		cpu7-middle-thermal {
4672			polling-delay-passive = <0>;
4673			polling-delay = <0>;
4674			thermal-sensors = <&tsens0 12>;
4675
4676			trips {
4677				cpu7_middle_alert0: trip-point0 {
4678					temperature = <90000>;
4679					hysteresis = <2000>;
4680					type = "passive";
4681				};
4682
4683				cpu7_middle_alert1: trip-point1 {
4684					temperature = <95000>;
4685					hysteresis = <2000>;
4686					type = "passive";
4687				};
4688
4689				cpu7_middle_crit: cpu-crit {
4690					temperature = <110000>;
4691					hysteresis = <1000>;
4692					type = "critical";
4693				};
4694			};
4695		};
4696
4697		cpu7-bottom-thermal {
4698			polling-delay-passive = <0>;
4699			polling-delay = <0>;
4700			thermal-sensors = <&tsens0 13>;
4701
4702			trips {
4703				cpu7_bottom_alert0: trip-point0 {
4704					temperature = <90000>;
4705					hysteresis = <2000>;
4706					type = "passive";
4707				};
4708
4709				cpu7_bottom_alert1: trip-point1 {
4710					temperature = <95000>;
4711					hysteresis = <2000>;
4712					type = "passive";
4713				};
4714
4715				cpu7_bottom_crit: cpu-crit {
4716					temperature = <110000>;
4717					hysteresis = <1000>;
4718					type = "critical";
4719				};
4720			};
4721		};
4722
4723		gpu-top-thermal {
4724			polling-delay-passive = <10>;
4725			polling-delay = <0>;
4726			thermal-sensors = <&tsens0 14>;
4727
4728			trips {
4729				thermal-engine-config {
4730					temperature = <125000>;
4731					hysteresis = <1000>;
4732					type = "passive";
4733				};
4734
4735				thermal-hal-config {
4736					temperature = <125000>;
4737					hysteresis = <1000>;
4738					type = "passive";
4739				};
4740
4741				reset-mon-cfg {
4742					temperature = <115000>;
4743					hysteresis = <5000>;
4744					type = "passive";
4745				};
4746
4747				gpu0_tj_cfg: tj-cfg {
4748					temperature = <95000>;
4749					hysteresis = <5000>;
4750					type = "passive";
4751				};
4752			};
4753		};
4754
4755		gpu-bottom-thermal {
4756			polling-delay-passive = <10>;
4757			polling-delay = <0>;
4758			thermal-sensors = <&tsens0 15>;
4759
4760			trips {
4761				thermal-engine-config {
4762					temperature = <125000>;
4763					hysteresis = <1000>;
4764					type = "passive";
4765				};
4766
4767				thermal-hal-config {
4768					temperature = <125000>;
4769					hysteresis = <1000>;
4770					type = "passive";
4771				};
4772
4773				reset-mon-cfg {
4774					temperature = <115000>;
4775					hysteresis = <5000>;
4776					type = "passive";
4777				};
4778
4779				gpu1_tj_cfg: tj-cfg {
4780					temperature = <95000>;
4781					hysteresis = <5000>;
4782					type = "passive";
4783				};
4784			};
4785		};
4786
4787		aoss1-thermal {
4788			polling-delay-passive = <0>;
4789			polling-delay = <0>;
4790			thermal-sensors = <&tsens1 0>;
4791
4792			trips {
4793				thermal-engine-config {
4794					temperature = <125000>;
4795					hysteresis = <1000>;
4796					type = "passive";
4797				};
4798
4799				reset-mon-cfg {
4800					temperature = <115000>;
4801					hysteresis = <5000>;
4802					type = "passive";
4803				};
4804			};
4805		};
4806
4807		cpu0-thermal {
4808			polling-delay-passive = <0>;
4809			polling-delay = <0>;
4810			thermal-sensors = <&tsens1 1>;
4811
4812			trips {
4813				cpu0_alert0: trip-point0 {
4814					temperature = <90000>;
4815					hysteresis = <2000>;
4816					type = "passive";
4817				};
4818
4819				cpu0_alert1: trip-point1 {
4820					temperature = <95000>;
4821					hysteresis = <2000>;
4822					type = "passive";
4823				};
4824
4825				cpu0_crit: cpu-crit {
4826					temperature = <110000>;
4827					hysteresis = <1000>;
4828					type = "critical";
4829				};
4830			};
4831		};
4832
4833		cpu1-thermal {
4834			polling-delay-passive = <0>;
4835			polling-delay = <0>;
4836			thermal-sensors = <&tsens1 2>;
4837
4838			trips {
4839				cpu1_alert0: trip-point0 {
4840					temperature = <90000>;
4841					hysteresis = <2000>;
4842					type = "passive";
4843				};
4844
4845				cpu1_alert1: trip-point1 {
4846					temperature = <95000>;
4847					hysteresis = <2000>;
4848					type = "passive";
4849				};
4850
4851				cpu1_crit: cpu-crit {
4852					temperature = <110000>;
4853					hysteresis = <1000>;
4854					type = "critical";
4855				};
4856			};
4857		};
4858
4859		cpu2-thermal {
4860			polling-delay-passive = <0>;
4861			polling-delay = <0>;
4862			thermal-sensors = <&tsens1 3>;
4863
4864			trips {
4865				cpu2_alert0: trip-point0 {
4866					temperature = <90000>;
4867					hysteresis = <2000>;
4868					type = "passive";
4869				};
4870
4871				cpu2_alert1: trip-point1 {
4872					temperature = <95000>;
4873					hysteresis = <2000>;
4874					type = "passive";
4875				};
4876
4877				cpu2_crit: cpu-crit {
4878					temperature = <110000>;
4879					hysteresis = <1000>;
4880					type = "critical";
4881				};
4882			};
4883		};
4884
4885		cpu3-thermal {
4886			polling-delay-passive = <0>;
4887			polling-delay = <0>;
4888			thermal-sensors = <&tsens1 4>;
4889
4890			trips {
4891				cpu3_alert0: trip-point0 {
4892					temperature = <90000>;
4893					hysteresis = <2000>;
4894					type = "passive";
4895				};
4896
4897				cpu3_alert1: trip-point1 {
4898					temperature = <95000>;
4899					hysteresis = <2000>;
4900					type = "passive";
4901				};
4902
4903				cpu3_crit: cpu-crit {
4904					temperature = <110000>;
4905					hysteresis = <1000>;
4906					type = "critical";
4907				};
4908			};
4909		};
4910
4911		cdsp0-thermal {
4912			polling-delay-passive = <10>;
4913			polling-delay = <0>;
4914			thermal-sensors = <&tsens1 5>;
4915
4916			trips {
4917				thermal-engine-config {
4918					temperature = <125000>;
4919					hysteresis = <1000>;
4920					type = "passive";
4921				};
4922
4923				thermal-hal-config {
4924					temperature = <125000>;
4925					hysteresis = <1000>;
4926					type = "passive";
4927				};
4928
4929				reset-mon-cfg {
4930					temperature = <115000>;
4931					hysteresis = <5000>;
4932					type = "passive";
4933				};
4934
4935				cdsp_0_config: junction-config {
4936					temperature = <95000>;
4937					hysteresis = <5000>;
4938					type = "passive";
4939				};
4940			};
4941		};
4942
4943		cdsp1-thermal {
4944			polling-delay-passive = <10>;
4945			polling-delay = <0>;
4946			thermal-sensors = <&tsens1 6>;
4947
4948			trips {
4949				thermal-engine-config {
4950					temperature = <125000>;
4951					hysteresis = <1000>;
4952					type = "passive";
4953				};
4954
4955				thermal-hal-config {
4956					temperature = <125000>;
4957					hysteresis = <1000>;
4958					type = "passive";
4959				};
4960
4961				reset-mon-cfg {
4962					temperature = <115000>;
4963					hysteresis = <5000>;
4964					type = "passive";
4965				};
4966
4967				cdsp_1_config: junction-config {
4968					temperature = <95000>;
4969					hysteresis = <5000>;
4970					type = "passive";
4971				};
4972			};
4973		};
4974
4975		cdsp2-thermal {
4976			polling-delay-passive = <10>;
4977			polling-delay = <0>;
4978			thermal-sensors = <&tsens1 7>;
4979
4980			trips {
4981				thermal-engine-config {
4982					temperature = <125000>;
4983					hysteresis = <1000>;
4984					type = "passive";
4985				};
4986
4987				thermal-hal-config {
4988					temperature = <125000>;
4989					hysteresis = <1000>;
4990					type = "passive";
4991				};
4992
4993				reset-mon-cfg {
4994					temperature = <115000>;
4995					hysteresis = <5000>;
4996					type = "passive";
4997				};
4998
4999				cdsp_2_config: junction-config {
5000					temperature = <95000>;
5001					hysteresis = <5000>;
5002					type = "passive";
5003				};
5004			};
5005		};
5006
5007		video-thermal {
5008			polling-delay-passive = <0>;
5009			polling-delay = <0>;
5010			thermal-sensors = <&tsens1 8>;
5011
5012			trips {
5013				thermal-engine-config {
5014					temperature = <125000>;
5015					hysteresis = <1000>;
5016					type = "passive";
5017				};
5018
5019				reset-mon-cfg {
5020					temperature = <115000>;
5021					hysteresis = <5000>;
5022					type = "passive";
5023				};
5024			};
5025		};
5026
5027		mem-thermal {
5028			polling-delay-passive = <10>;
5029			polling-delay = <0>;
5030			thermal-sensors = <&tsens1 9>;
5031
5032			trips {
5033				thermal-engine-config {
5034					temperature = <125000>;
5035					hysteresis = <1000>;
5036					type = "passive";
5037				};
5038
5039				ddr_config0: ddr0-config {
5040					temperature = <90000>;
5041					hysteresis = <5000>;
5042					type = "passive";
5043				};
5044
5045				reset-mon-cfg {
5046					temperature = <115000>;
5047					hysteresis = <5000>;
5048					type = "passive";
5049				};
5050			};
5051		};
5052
5053		modem0-thermal {
5054			polling-delay-passive = <0>;
5055			polling-delay = <0>;
5056			thermal-sensors = <&tsens1 10>;
5057
5058			trips {
5059				thermal-engine-config {
5060					temperature = <125000>;
5061					hysteresis = <1000>;
5062					type = "passive";
5063				};
5064
5065				mdmss0_config0: mdmss0-config0 {
5066					temperature = <102000>;
5067					hysteresis = <3000>;
5068					type = "passive";
5069				};
5070
5071				mdmss0_config1: mdmss0-config1 {
5072					temperature = <105000>;
5073					hysteresis = <3000>;
5074					type = "passive";
5075				};
5076
5077				reset-mon-cfg {
5078					temperature = <115000>;
5079					hysteresis = <5000>;
5080					type = "passive";
5081				};
5082			};
5083		};
5084
5085		modem1-thermal {
5086			polling-delay-passive = <0>;
5087			polling-delay = <0>;
5088			thermal-sensors = <&tsens1 11>;
5089
5090			trips {
5091				thermal-engine-config {
5092					temperature = <125000>;
5093					hysteresis = <1000>;
5094					type = "passive";
5095				};
5096
5097				mdmss1_config0: mdmss1-config0 {
5098					temperature = <102000>;
5099					hysteresis = <3000>;
5100					type = "passive";
5101				};
5102
5103				mdmss1_config1: mdmss1-config1 {
5104					temperature = <105000>;
5105					hysteresis = <3000>;
5106					type = "passive";
5107				};
5108
5109				reset-mon-cfg {
5110					temperature = <115000>;
5111					hysteresis = <5000>;
5112					type = "passive";
5113				};
5114			};
5115		};
5116
5117		modem2-thermal {
5118			polling-delay-passive = <0>;
5119			polling-delay = <0>;
5120			thermal-sensors = <&tsens1 12>;
5121
5122			trips {
5123				thermal-engine-config {
5124					temperature = <125000>;
5125					hysteresis = <1000>;
5126					type = "passive";
5127				};
5128
5129				mdmss2_config0: mdmss2-config0 {
5130					temperature = <102000>;
5131					hysteresis = <3000>;
5132					type = "passive";
5133				};
5134
5135				mdmss2_config1: mdmss2-config1 {
5136					temperature = <105000>;
5137					hysteresis = <3000>;
5138					type = "passive";
5139				};
5140
5141				reset-mon-cfg {
5142					temperature = <115000>;
5143					hysteresis = <5000>;
5144					type = "passive";
5145				};
5146			};
5147		};
5148
5149		modem3-thermal {
5150			polling-delay-passive = <0>;
5151			polling-delay = <0>;
5152			thermal-sensors = <&tsens1 13>;
5153
5154			trips {
5155				thermal-engine-config {
5156					temperature = <125000>;
5157					hysteresis = <1000>;
5158					type = "passive";
5159				};
5160
5161				mdmss3_config0: mdmss3-config0 {
5162					temperature = <102000>;
5163					hysteresis = <3000>;
5164					type = "passive";
5165				};
5166
5167				mdmss3_config1: mdmss3-config1 {
5168					temperature = <105000>;
5169					hysteresis = <3000>;
5170					type = "passive";
5171				};
5172
5173				reset-mon-cfg {
5174					temperature = <115000>;
5175					hysteresis = <5000>;
5176					type = "passive";
5177				};
5178			};
5179		};
5180
5181		camera0-thermal {
5182			polling-delay-passive = <0>;
5183			polling-delay = <0>;
5184			thermal-sensors = <&tsens1 14>;
5185
5186			trips {
5187				thermal-engine-config {
5188					temperature = <125000>;
5189					hysteresis = <1000>;
5190					type = "passive";
5191				};
5192
5193				reset-mon-cfg {
5194					temperature = <115000>;
5195					hysteresis = <5000>;
5196					type = "passive";
5197				};
5198			};
5199		};
5200
5201		camera1-thermal {
5202			polling-delay-passive = <0>;
5203			polling-delay = <0>;
5204			thermal-sensors = <&tsens1 15>;
5205
5206			trips {
5207				thermal-engine-config {
5208					temperature = <125000>;
5209					hysteresis = <1000>;
5210					type = "passive";
5211				};
5212
5213				reset-mon-cfg {
5214					temperature = <115000>;
5215					hysteresis = <5000>;
5216					type = "passive";
5217				};
5218			};
5219		};
5220	};
5221
5222	timer {
5223		compatible = "arm,armv8-timer";
5224		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5225			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5226			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5227			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5228		clock-frequency = <19200000>;
5229	};
5230};
5231