xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sm8250.dtsi (revision bacf743e)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
4 */
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
8#include <dt-bindings/clock/qcom,gcc-sm8250.h>
9#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
10#include <dt-bindings/clock/qcom,rpmh.h>
11#include <dt-bindings/dma/qcom-gpi.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/interconnect/qcom,osm-l3.h>
14#include <dt-bindings/interconnect/qcom,sm8250.h>
15#include <dt-bindings/mailbox/qcom-ipcc.h>
16#include <dt-bindings/power/qcom-rpmpd.h>
17#include <dt-bindings/soc/qcom,apr.h>
18#include <dt-bindings/soc/qcom,rpmh-rsc.h>
19#include <dt-bindings/sound/qcom,q6afe.h>
20#include <dt-bindings/thermal/thermal.h>
21#include <dt-bindings/clock/qcom,videocc-sm8250.h>
22
23/ {
24	interrupt-parent = <&intc>;
25
26	#address-cells = <2>;
27	#size-cells = <2>;
28
29	aliases {
30		i2c0 = &i2c0;
31		i2c1 = &i2c1;
32		i2c2 = &i2c2;
33		i2c3 = &i2c3;
34		i2c4 = &i2c4;
35		i2c5 = &i2c5;
36		i2c6 = &i2c6;
37		i2c7 = &i2c7;
38		i2c8 = &i2c8;
39		i2c9 = &i2c9;
40		i2c10 = &i2c10;
41		i2c11 = &i2c11;
42		i2c12 = &i2c12;
43		i2c13 = &i2c13;
44		i2c14 = &i2c14;
45		i2c15 = &i2c15;
46		i2c16 = &i2c16;
47		i2c17 = &i2c17;
48		i2c18 = &i2c18;
49		i2c19 = &i2c19;
50		spi0 = &spi0;
51		spi1 = &spi1;
52		spi2 = &spi2;
53		spi3 = &spi3;
54		spi4 = &spi4;
55		spi5 = &spi5;
56		spi6 = &spi6;
57		spi7 = &spi7;
58		spi8 = &spi8;
59		spi9 = &spi9;
60		spi10 = &spi10;
61		spi11 = &spi11;
62		spi12 = &spi12;
63		spi13 = &spi13;
64		spi14 = &spi14;
65		spi15 = &spi15;
66		spi16 = &spi16;
67		spi17 = &spi17;
68		spi18 = &spi18;
69		spi19 = &spi19;
70	};
71
72	chosen { };
73
74	clocks {
75		xo_board: xo-board {
76			compatible = "fixed-clock";
77			#clock-cells = <0>;
78			clock-frequency = <38400000>;
79			clock-output-names = "xo_board";
80		};
81
82		sleep_clk: sleep-clk {
83			compatible = "fixed-clock";
84			clock-frequency = <32768>;
85			#clock-cells = <0>;
86		};
87	};
88
89	cpus {
90		#address-cells = <2>;
91		#size-cells = <0>;
92
93		CPU0: cpu@0 {
94			device_type = "cpu";
95			compatible = "qcom,kryo485";
96			reg = <0x0 0x0>;
97			enable-method = "psci";
98			capacity-dmips-mhz = <448>;
99			dynamic-power-coefficient = <205>;
100			next-level-cache = <&L2_0>;
101			power-domains = <&CPU_PD0>;
102			power-domain-names = "psci";
103			qcom,freq-domain = <&cpufreq_hw 0>;
104			operating-points-v2 = <&cpu0_opp_table>;
105			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
106					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
107			#cooling-cells = <2>;
108			L2_0: l2-cache {
109				compatible = "cache";
110				next-level-cache = <&L3_0>;
111				L3_0: l3-cache {
112					compatible = "cache";
113				};
114			};
115		};
116
117		CPU1: cpu@100 {
118			device_type = "cpu";
119			compatible = "qcom,kryo485";
120			reg = <0x0 0x100>;
121			enable-method = "psci";
122			capacity-dmips-mhz = <448>;
123			dynamic-power-coefficient = <205>;
124			next-level-cache = <&L2_100>;
125			power-domains = <&CPU_PD1>;
126			power-domain-names = "psci";
127			qcom,freq-domain = <&cpufreq_hw 0>;
128			operating-points-v2 = <&cpu0_opp_table>;
129			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
130					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
131			#cooling-cells = <2>;
132			L2_100: l2-cache {
133				compatible = "cache";
134				next-level-cache = <&L3_0>;
135			};
136		};
137
138		CPU2: cpu@200 {
139			device_type = "cpu";
140			compatible = "qcom,kryo485";
141			reg = <0x0 0x200>;
142			enable-method = "psci";
143			capacity-dmips-mhz = <448>;
144			dynamic-power-coefficient = <205>;
145			next-level-cache = <&L2_200>;
146			power-domains = <&CPU_PD2>;
147			power-domain-names = "psci";
148			qcom,freq-domain = <&cpufreq_hw 0>;
149			operating-points-v2 = <&cpu0_opp_table>;
150			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
151					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
152			#cooling-cells = <2>;
153			L2_200: l2-cache {
154				compatible = "cache";
155				next-level-cache = <&L3_0>;
156			};
157		};
158
159		CPU3: cpu@300 {
160			device_type = "cpu";
161			compatible = "qcom,kryo485";
162			reg = <0x0 0x300>;
163			enable-method = "psci";
164			capacity-dmips-mhz = <448>;
165			dynamic-power-coefficient = <205>;
166			next-level-cache = <&L2_300>;
167			power-domains = <&CPU_PD3>;
168			power-domain-names = "psci";
169			qcom,freq-domain = <&cpufreq_hw 0>;
170			operating-points-v2 = <&cpu0_opp_table>;
171			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
172					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
173			#cooling-cells = <2>;
174			L2_300: l2-cache {
175				compatible = "cache";
176				next-level-cache = <&L3_0>;
177			};
178		};
179
180		CPU4: cpu@400 {
181			device_type = "cpu";
182			compatible = "qcom,kryo485";
183			reg = <0x0 0x400>;
184			enable-method = "psci";
185			capacity-dmips-mhz = <1024>;
186			dynamic-power-coefficient = <379>;
187			next-level-cache = <&L2_400>;
188			power-domains = <&CPU_PD4>;
189			power-domain-names = "psci";
190			qcom,freq-domain = <&cpufreq_hw 1>;
191			operating-points-v2 = <&cpu4_opp_table>;
192			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
193					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
194			#cooling-cells = <2>;
195			L2_400: l2-cache {
196				compatible = "cache";
197				next-level-cache = <&L3_0>;
198			};
199		};
200
201		CPU5: cpu@500 {
202			device_type = "cpu";
203			compatible = "qcom,kryo485";
204			reg = <0x0 0x500>;
205			enable-method = "psci";
206			capacity-dmips-mhz = <1024>;
207			dynamic-power-coefficient = <379>;
208			next-level-cache = <&L2_500>;
209			power-domains = <&CPU_PD5>;
210			power-domain-names = "psci";
211			qcom,freq-domain = <&cpufreq_hw 1>;
212			operating-points-v2 = <&cpu4_opp_table>;
213			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
214					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
215			#cooling-cells = <2>;
216			L2_500: l2-cache {
217				compatible = "cache";
218				next-level-cache = <&L3_0>;
219			};
220
221		};
222
223		CPU6: cpu@600 {
224			device_type = "cpu";
225			compatible = "qcom,kryo485";
226			reg = <0x0 0x600>;
227			enable-method = "psci";
228			capacity-dmips-mhz = <1024>;
229			dynamic-power-coefficient = <379>;
230			next-level-cache = <&L2_600>;
231			power-domains = <&CPU_PD6>;
232			power-domain-names = "psci";
233			qcom,freq-domain = <&cpufreq_hw 1>;
234			operating-points-v2 = <&cpu4_opp_table>;
235			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
236					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
237			#cooling-cells = <2>;
238			L2_600: l2-cache {
239				compatible = "cache";
240				next-level-cache = <&L3_0>;
241			};
242		};
243
244		CPU7: cpu@700 {
245			device_type = "cpu";
246			compatible = "qcom,kryo485";
247			reg = <0x0 0x700>;
248			enable-method = "psci";
249			capacity-dmips-mhz = <1024>;
250			dynamic-power-coefficient = <444>;
251			next-level-cache = <&L2_700>;
252			power-domains = <&CPU_PD7>;
253			power-domain-names = "psci";
254			qcom,freq-domain = <&cpufreq_hw 2>;
255			operating-points-v2 = <&cpu7_opp_table>;
256			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
257					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
258			#cooling-cells = <2>;
259			L2_700: l2-cache {
260				compatible = "cache";
261				next-level-cache = <&L3_0>;
262			};
263		};
264
265		cpu-map {
266			cluster0 {
267				core0 {
268					cpu = <&CPU0>;
269				};
270
271				core1 {
272					cpu = <&CPU1>;
273				};
274
275				core2 {
276					cpu = <&CPU2>;
277				};
278
279				core3 {
280					cpu = <&CPU3>;
281				};
282
283				core4 {
284					cpu = <&CPU4>;
285				};
286
287				core5 {
288					cpu = <&CPU5>;
289				};
290
291				core6 {
292					cpu = <&CPU6>;
293				};
294
295				core7 {
296					cpu = <&CPU7>;
297				};
298			};
299		};
300
301		idle-states {
302			entry-method = "psci";
303
304			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
305				compatible = "arm,idle-state";
306				idle-state-name = "silver-rail-power-collapse";
307				arm,psci-suspend-param = <0x40000004>;
308				entry-latency-us = <360>;
309				exit-latency-us = <531>;
310				min-residency-us = <3934>;
311				local-timer-stop;
312			};
313
314			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
315				compatible = "arm,idle-state";
316				idle-state-name = "gold-rail-power-collapse";
317				arm,psci-suspend-param = <0x40000004>;
318				entry-latency-us = <702>;
319				exit-latency-us = <1061>;
320				min-residency-us = <4488>;
321				local-timer-stop;
322			};
323		};
324
325		domain-idle-states {
326			CLUSTER_SLEEP_0: cluster-sleep-0 {
327				compatible = "domain-idle-state";
328				idle-state-name = "cluster-llcc-off";
329				arm,psci-suspend-param = <0x4100c244>;
330				entry-latency-us = <3264>;
331				exit-latency-us = <6562>;
332				min-residency-us = <9987>;
333				local-timer-stop;
334			};
335		};
336	};
337
338	cpu0_opp_table: cpu0_opp_table {
339		compatible = "operating-points-v2";
340		opp-shared;
341
342		cpu0_opp1: opp-300000000 {
343			opp-hz = /bits/ 64 <300000000>;
344			opp-peak-kBps = <800000 9600000>;
345		};
346
347		cpu0_opp2: opp-403200000 {
348			opp-hz = /bits/ 64 <403200000>;
349			opp-peak-kBps = <800000 9600000>;
350		};
351
352		cpu0_opp3: opp-518400000 {
353			opp-hz = /bits/ 64 <518400000>;
354			opp-peak-kBps = <800000 16588800>;
355		};
356
357		cpu0_opp4: opp-614400000 {
358			opp-hz = /bits/ 64 <614400000>;
359			opp-peak-kBps = <800000 16588800>;
360		};
361
362		cpu0_opp5: opp-691200000 {
363			opp-hz = /bits/ 64 <691200000>;
364			opp-peak-kBps = <800000 19660800>;
365		};
366
367		cpu0_opp6: opp-787200000 {
368			opp-hz = /bits/ 64 <787200000>;
369			opp-peak-kBps = <1804000 19660800>;
370		};
371
372		cpu0_opp7: opp-883200000 {
373			opp-hz = /bits/ 64 <883200000>;
374			opp-peak-kBps = <1804000 23347200>;
375		};
376
377		cpu0_opp8: opp-979200000 {
378			opp-hz = /bits/ 64 <979200000>;
379			opp-peak-kBps = <1804000 26419200>;
380		};
381
382		cpu0_opp9: opp-1075200000 {
383			opp-hz = /bits/ 64 <1075200000>;
384			opp-peak-kBps = <1804000 29491200>;
385		};
386
387		cpu0_opp10: opp-1171200000 {
388			opp-hz = /bits/ 64 <1171200000>;
389			opp-peak-kBps = <1804000 32563200>;
390		};
391
392		cpu0_opp11: opp-1248000000 {
393			opp-hz = /bits/ 64 <1248000000>;
394			opp-peak-kBps = <1804000 36249600>;
395		};
396
397		cpu0_opp12: opp-1344000000 {
398			opp-hz = /bits/ 64 <1344000000>;
399			opp-peak-kBps = <2188000 36249600>;
400		};
401
402		cpu0_opp13: opp-1420800000 {
403			opp-hz = /bits/ 64 <1420800000>;
404			opp-peak-kBps = <2188000 39321600>;
405		};
406
407		cpu0_opp14: opp-1516800000 {
408			opp-hz = /bits/ 64 <1516800000>;
409			opp-peak-kBps = <3072000 42393600>;
410		};
411
412		cpu0_opp15: opp-1612800000 {
413			opp-hz = /bits/ 64 <1612800000>;
414			opp-peak-kBps = <3072000 42393600>;
415		};
416
417		cpu0_opp16: opp-1708800000 {
418			opp-hz = /bits/ 64 <1708800000>;
419			opp-peak-kBps = <4068000 42393600>;
420		};
421
422		cpu0_opp17: opp-1804800000 {
423			opp-hz = /bits/ 64 <1804800000>;
424			opp-peak-kBps = <4068000 42393600>;
425		};
426	};
427
428	cpu4_opp_table: cpu4_opp_table {
429		compatible = "operating-points-v2";
430		opp-shared;
431
432		cpu4_opp1: opp-710400000 {
433			opp-hz = /bits/ 64 <710400000>;
434			opp-peak-kBps = <1804000 19660800>;
435		};
436
437		cpu4_opp2: opp-825600000 {
438			opp-hz = /bits/ 64 <825600000>;
439			opp-peak-kBps = <2188000 23347200>;
440		};
441
442		cpu4_opp3: opp-940800000 {
443			opp-hz = /bits/ 64 <940800000>;
444			opp-peak-kBps = <2188000 26419200>;
445		};
446
447		cpu4_opp4: opp-1056000000 {
448			opp-hz = /bits/ 64 <1056000000>;
449			opp-peak-kBps = <3072000 26419200>;
450		};
451
452		cpu4_opp5: opp-1171200000 {
453			opp-hz = /bits/ 64 <1171200000>;
454			opp-peak-kBps = <3072000 29491200>;
455		};
456
457		cpu4_opp6: opp-1286400000 {
458			opp-hz = /bits/ 64 <1286400000>;
459			opp-peak-kBps = <4068000 29491200>;
460		};
461
462		cpu4_opp7: opp-1382400000 {
463			opp-hz = /bits/ 64 <1382400000>;
464			opp-peak-kBps = <4068000 32563200>;
465		};
466
467		cpu4_opp8: opp-1478400000 {
468			opp-hz = /bits/ 64 <1478400000>;
469			opp-peak-kBps = <4068000 32563200>;
470		};
471
472		cpu4_opp9: opp-1574400000 {
473			opp-hz = /bits/ 64 <1574400000>;
474			opp-peak-kBps = <5412000 39321600>;
475		};
476
477		cpu4_opp10: opp-1670400000 {
478			opp-hz = /bits/ 64 <1670400000>;
479			opp-peak-kBps = <5412000 42393600>;
480		};
481
482		cpu4_opp11: opp-1766400000 {
483			opp-hz = /bits/ 64 <1766400000>;
484			opp-peak-kBps = <5412000 45465600>;
485		};
486
487		cpu4_opp12: opp-1862400000 {
488			opp-hz = /bits/ 64 <1862400000>;
489			opp-peak-kBps = <6220000 45465600>;
490		};
491
492		cpu4_opp13: opp-1958400000 {
493			opp-hz = /bits/ 64 <1958400000>;
494			opp-peak-kBps = <6220000 48537600>;
495		};
496
497		cpu4_opp14: opp-2054400000 {
498			opp-hz = /bits/ 64 <2054400000>;
499			opp-peak-kBps = <7216000 48537600>;
500		};
501
502		cpu4_opp15: opp-2150400000 {
503			opp-hz = /bits/ 64 <2150400000>;
504			opp-peak-kBps = <7216000 51609600>;
505		};
506
507		cpu4_opp16: opp-2246400000 {
508			opp-hz = /bits/ 64 <2246400000>;
509			opp-peak-kBps = <7216000 51609600>;
510		};
511
512		cpu4_opp17: opp-2342400000 {
513			opp-hz = /bits/ 64 <2342400000>;
514			opp-peak-kBps = <8368000 51609600>;
515		};
516
517		cpu4_opp18: opp-2419200000 {
518			opp-hz = /bits/ 64 <2419200000>;
519			opp-peak-kBps = <8368000 51609600>;
520		};
521	};
522
523	cpu7_opp_table: cpu7_opp_table {
524		compatible = "operating-points-v2";
525		opp-shared;
526
527		cpu7_opp1: opp-844800000 {
528			opp-hz = /bits/ 64 <844800000>;
529			opp-peak-kBps = <2188000 19660800>;
530		};
531
532		cpu7_opp2: opp-960000000 {
533			opp-hz = /bits/ 64 <960000000>;
534			opp-peak-kBps = <2188000 26419200>;
535		};
536
537		cpu7_opp3: opp-1075200000 {
538			opp-hz = /bits/ 64 <1075200000>;
539			opp-peak-kBps = <3072000 26419200>;
540		};
541
542		cpu7_opp4: opp-1190400000 {
543			opp-hz = /bits/ 64 <1190400000>;
544			opp-peak-kBps = <3072000 29491200>;
545		};
546
547		cpu7_opp5: opp-1305600000 {
548			opp-hz = /bits/ 64 <1305600000>;
549			opp-peak-kBps = <4068000 32563200>;
550		};
551
552		cpu7_opp6: opp-1401600000 {
553			opp-hz = /bits/ 64 <1401600000>;
554			opp-peak-kBps = <4068000 32563200>;
555		};
556
557		cpu7_opp7: opp-1516800000 {
558			opp-hz = /bits/ 64 <1516800000>;
559			opp-peak-kBps = <4068000 36249600>;
560		};
561
562		cpu7_opp8: opp-1632000000 {
563			opp-hz = /bits/ 64 <1632000000>;
564			opp-peak-kBps = <5412000 39321600>;
565		};
566
567		cpu7_opp9: opp-1747200000 {
568			opp-hz = /bits/ 64 <1708800000>;
569			opp-peak-kBps = <5412000 42393600>;
570		};
571
572		cpu7_opp10: opp-1862400000 {
573			opp-hz = /bits/ 64 <1862400000>;
574			opp-peak-kBps = <6220000 45465600>;
575		};
576
577		cpu7_opp11: opp-1977600000 {
578			opp-hz = /bits/ 64 <1977600000>;
579			opp-peak-kBps = <6220000 48537600>;
580		};
581
582		cpu7_opp12: opp-2073600000 {
583			opp-hz = /bits/ 64 <2073600000>;
584			opp-peak-kBps = <7216000 48537600>;
585		};
586
587		cpu7_opp13: opp-2169600000 {
588			opp-hz = /bits/ 64 <2169600000>;
589			opp-peak-kBps = <7216000 51609600>;
590		};
591
592		cpu7_opp14: opp-2265600000 {
593			opp-hz = /bits/ 64 <2265600000>;
594			opp-peak-kBps = <7216000 51609600>;
595		};
596
597		cpu7_opp15: opp-2361600000 {
598			opp-hz = /bits/ 64 <2361600000>;
599			opp-peak-kBps = <8368000 51609600>;
600		};
601
602		cpu7_opp16: opp-2457600000 {
603			opp-hz = /bits/ 64 <2457600000>;
604			opp-peak-kBps = <8368000 51609600>;
605		};
606
607		cpu7_opp17: opp-2553600000 {
608			opp-hz = /bits/ 64 <2553600000>;
609			opp-peak-kBps = <8368000 51609600>;
610		};
611
612		cpu7_opp18: opp-2649600000 {
613			opp-hz = /bits/ 64 <2649600000>;
614			opp-peak-kBps = <8368000 51609600>;
615		};
616
617		cpu7_opp19: opp-2745600000 {
618			opp-hz = /bits/ 64 <2745600000>;
619			opp-peak-kBps = <8368000 51609600>;
620		};
621
622		cpu7_opp20: opp-2841600000 {
623			opp-hz = /bits/ 64 <2841600000>;
624			opp-peak-kBps = <8368000 51609600>;
625		};
626	};
627
628	firmware {
629		scm: scm {
630			compatible = "qcom,scm";
631			#reset-cells = <1>;
632		};
633	};
634
635	memory@80000000 {
636		device_type = "memory";
637		/* We expect the bootloader to fill in the size */
638		reg = <0x0 0x80000000 0x0 0x0>;
639	};
640
641	pmu {
642		compatible = "arm,armv8-pmuv3";
643		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
644	};
645
646	psci {
647		compatible = "arm,psci-1.0";
648		method = "smc";
649
650		CPU_PD0: cpu0 {
651			#power-domain-cells = <0>;
652			power-domains = <&CLUSTER_PD>;
653			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
654		};
655
656		CPU_PD1: cpu1 {
657			#power-domain-cells = <0>;
658			power-domains = <&CLUSTER_PD>;
659			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
660		};
661
662		CPU_PD2: cpu2 {
663			#power-domain-cells = <0>;
664			power-domains = <&CLUSTER_PD>;
665			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
666		};
667
668		CPU_PD3: cpu3 {
669			#power-domain-cells = <0>;
670			power-domains = <&CLUSTER_PD>;
671			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
672		};
673
674		CPU_PD4: cpu4 {
675			#power-domain-cells = <0>;
676			power-domains = <&CLUSTER_PD>;
677			domain-idle-states = <&BIG_CPU_SLEEP_0>;
678		};
679
680		CPU_PD5: cpu5 {
681			#power-domain-cells = <0>;
682			power-domains = <&CLUSTER_PD>;
683			domain-idle-states = <&BIG_CPU_SLEEP_0>;
684		};
685
686		CPU_PD6: cpu6 {
687			#power-domain-cells = <0>;
688			power-domains = <&CLUSTER_PD>;
689			domain-idle-states = <&BIG_CPU_SLEEP_0>;
690		};
691
692		CPU_PD7: cpu7 {
693			#power-domain-cells = <0>;
694			power-domains = <&CLUSTER_PD>;
695			domain-idle-states = <&BIG_CPU_SLEEP_0>;
696		};
697
698		CLUSTER_PD: cpu-cluster0 {
699			#power-domain-cells = <0>;
700			domain-idle-states = <&CLUSTER_SLEEP_0>;
701		};
702	};
703
704	reserved-memory {
705		#address-cells = <2>;
706		#size-cells = <2>;
707		ranges;
708
709		hyp_mem: memory@80000000 {
710			reg = <0x0 0x80000000 0x0 0x600000>;
711			no-map;
712		};
713
714		xbl_aop_mem: memory@80700000 {
715			reg = <0x0 0x80700000 0x0 0x160000>;
716			no-map;
717		};
718
719		cmd_db: memory@80860000 {
720			compatible = "qcom,cmd-db";
721			reg = <0x0 0x80860000 0x0 0x20000>;
722			no-map;
723		};
724
725		smem_mem: memory@80900000 {
726			reg = <0x0 0x80900000 0x0 0x200000>;
727			no-map;
728		};
729
730		removed_mem: memory@80b00000 {
731			reg = <0x0 0x80b00000 0x0 0x5300000>;
732			no-map;
733		};
734
735		camera_mem: memory@86200000 {
736			reg = <0x0 0x86200000 0x0 0x500000>;
737			no-map;
738		};
739
740		wlan_mem: memory@86700000 {
741			reg = <0x0 0x86700000 0x0 0x100000>;
742			no-map;
743		};
744
745		ipa_fw_mem: memory@86800000 {
746			reg = <0x0 0x86800000 0x0 0x10000>;
747			no-map;
748		};
749
750		ipa_gsi_mem: memory@86810000 {
751			reg = <0x0 0x86810000 0x0 0xa000>;
752			no-map;
753		};
754
755		gpu_mem: memory@8681a000 {
756			reg = <0x0 0x8681a000 0x0 0x2000>;
757			no-map;
758		};
759
760		npu_mem: memory@86900000 {
761			reg = <0x0 0x86900000 0x0 0x500000>;
762			no-map;
763		};
764
765		video_mem: memory@86e00000 {
766			reg = <0x0 0x86e00000 0x0 0x500000>;
767			no-map;
768		};
769
770		cvp_mem: memory@87300000 {
771			reg = <0x0 0x87300000 0x0 0x500000>;
772			no-map;
773		};
774
775		cdsp_mem: memory@87800000 {
776			reg = <0x0 0x87800000 0x0 0x1400000>;
777			no-map;
778		};
779
780		slpi_mem: memory@88c00000 {
781			reg = <0x0 0x88c00000 0x0 0x1500000>;
782			no-map;
783		};
784
785		adsp_mem: memory@8a100000 {
786			reg = <0x0 0x8a100000 0x0 0x1d00000>;
787			no-map;
788		};
789
790		spss_mem: memory@8be00000 {
791			reg = <0x0 0x8be00000 0x0 0x100000>;
792			no-map;
793		};
794
795		cdsp_secure_heap: memory@8bf00000 {
796			reg = <0x0 0x8bf00000 0x0 0x4600000>;
797			no-map;
798		};
799	};
800
801	smem {
802		compatible = "qcom,smem";
803		memory-region = <&smem_mem>;
804		hwlocks = <&tcsr_mutex 3>;
805	};
806
807	smp2p-adsp {
808		compatible = "qcom,smp2p";
809		qcom,smem = <443>, <429>;
810		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
811					     IPCC_MPROC_SIGNAL_SMP2P
812					     IRQ_TYPE_EDGE_RISING>;
813		mboxes = <&ipcc IPCC_CLIENT_LPASS
814				IPCC_MPROC_SIGNAL_SMP2P>;
815
816		qcom,local-pid = <0>;
817		qcom,remote-pid = <2>;
818
819		smp2p_adsp_out: master-kernel {
820			qcom,entry-name = "master-kernel";
821			#qcom,smem-state-cells = <1>;
822		};
823
824		smp2p_adsp_in: slave-kernel {
825			qcom,entry-name = "slave-kernel";
826			interrupt-controller;
827			#interrupt-cells = <2>;
828		};
829	};
830
831	smp2p-cdsp {
832		compatible = "qcom,smp2p";
833		qcom,smem = <94>, <432>;
834		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
835					     IPCC_MPROC_SIGNAL_SMP2P
836					     IRQ_TYPE_EDGE_RISING>;
837		mboxes = <&ipcc IPCC_CLIENT_CDSP
838				IPCC_MPROC_SIGNAL_SMP2P>;
839
840		qcom,local-pid = <0>;
841		qcom,remote-pid = <5>;
842
843		smp2p_cdsp_out: master-kernel {
844			qcom,entry-name = "master-kernel";
845			#qcom,smem-state-cells = <1>;
846		};
847
848		smp2p_cdsp_in: slave-kernel {
849			qcom,entry-name = "slave-kernel";
850			interrupt-controller;
851			#interrupt-cells = <2>;
852		};
853	};
854
855	smp2p-slpi {
856		compatible = "qcom,smp2p";
857		qcom,smem = <481>, <430>;
858		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
859					     IPCC_MPROC_SIGNAL_SMP2P
860					     IRQ_TYPE_EDGE_RISING>;
861		mboxes = <&ipcc IPCC_CLIENT_SLPI
862				IPCC_MPROC_SIGNAL_SMP2P>;
863
864		qcom,local-pid = <0>;
865		qcom,remote-pid = <3>;
866
867		smp2p_slpi_out: master-kernel {
868			qcom,entry-name = "master-kernel";
869			#qcom,smem-state-cells = <1>;
870		};
871
872		smp2p_slpi_in: slave-kernel {
873			qcom,entry-name = "slave-kernel";
874			interrupt-controller;
875			#interrupt-cells = <2>;
876		};
877	};
878
879	soc: soc@0 {
880		#address-cells = <2>;
881		#size-cells = <2>;
882		ranges = <0 0 0 0 0x10 0>;
883		dma-ranges = <0 0 0 0 0x10 0>;
884		compatible = "simple-bus";
885
886		gcc: clock-controller@100000 {
887			compatible = "qcom,gcc-sm8250";
888			reg = <0x0 0x00100000 0x0 0x1f0000>;
889			#clock-cells = <1>;
890			#reset-cells = <1>;
891			#power-domain-cells = <1>;
892			clock-names = "bi_tcxo",
893				      "bi_tcxo_ao",
894				      "sleep_clk";
895			clocks = <&rpmhcc RPMH_CXO_CLK>,
896				 <&rpmhcc RPMH_CXO_CLK_A>,
897				 <&sleep_clk>;
898		};
899
900		ipcc: mailbox@408000 {
901			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
902			reg = <0 0x00408000 0 0x1000>;
903			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
904			interrupt-controller;
905			#interrupt-cells = <3>;
906			#mbox-cells = <2>;
907		};
908
909		rng: rng@793000 {
910			compatible = "qcom,prng-ee";
911			reg = <0 0x00793000 0 0x1000>;
912			clocks = <&gcc GCC_PRNG_AHB_CLK>;
913			clock-names = "core";
914		};
915
916		qup_opp_table: qup-opp-table {
917			compatible = "operating-points-v2";
918
919			opp-50000000 {
920				opp-hz = /bits/ 64 <50000000>;
921				required-opps = <&rpmhpd_opp_min_svs>;
922			};
923
924			opp-75000000 {
925				opp-hz = /bits/ 64 <75000000>;
926				required-opps = <&rpmhpd_opp_low_svs>;
927			};
928
929			opp-120000000 {
930				opp-hz = /bits/ 64 <120000000>;
931				required-opps = <&rpmhpd_opp_svs>;
932			};
933		};
934
935		gpi_dma2: dma-controller@800000 {
936			compatible = "qcom,sm8250-gpi-dma";
937			reg = <0 0x00800000 0 0x70000>;
938			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
939				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
940				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
941				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
942				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
943				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
944				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
945				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
946				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
947				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
948			dma-channels = <10>;
949			dma-channel-mask = <0x3f>;
950			iommus = <&apps_smmu 0x76 0x0>;
951			#dma-cells = <3>;
952			status = "disabled";
953		};
954
955		qupv3_id_2: geniqup@8c0000 {
956			compatible = "qcom,geni-se-qup";
957			reg = <0x0 0x008c0000 0x0 0x6000>;
958			clock-names = "m-ahb", "s-ahb";
959			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
960				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
961			#address-cells = <2>;
962			#size-cells = <2>;
963			iommus = <&apps_smmu 0x63 0x0>;
964			ranges;
965			status = "disabled";
966
967			i2c14: i2c@880000 {
968				compatible = "qcom,geni-i2c";
969				reg = <0 0x00880000 0 0x4000>;
970				clock-names = "se";
971				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
972				pinctrl-names = "default";
973				pinctrl-0 = <&qup_i2c14_default>;
974				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
975				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
976				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
977				dma-names = "tx", "rx";
978				#address-cells = <1>;
979				#size-cells = <0>;
980				status = "disabled";
981			};
982
983			spi14: spi@880000 {
984				compatible = "qcom,geni-spi";
985				reg = <0 0x00880000 0 0x4000>;
986				clock-names = "se";
987				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
988				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
989				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
990				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
991				dma-names = "tx", "rx";
992				power-domains = <&rpmhpd SM8250_CX>;
993				operating-points-v2 = <&qup_opp_table>;
994				#address-cells = <1>;
995				#size-cells = <0>;
996				status = "disabled";
997			};
998
999			i2c15: i2c@884000 {
1000				compatible = "qcom,geni-i2c";
1001				reg = <0 0x00884000 0 0x4000>;
1002				clock-names = "se";
1003				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1004				pinctrl-names = "default";
1005				pinctrl-0 = <&qup_i2c15_default>;
1006				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1007				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
1008				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
1009				dma-names = "tx", "rx";
1010				#address-cells = <1>;
1011				#size-cells = <0>;
1012				status = "disabled";
1013			};
1014
1015			spi15: spi@884000 {
1016				compatible = "qcom,geni-spi";
1017				reg = <0 0x00884000 0 0x4000>;
1018				clock-names = "se";
1019				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1020				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1021				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
1022				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
1023				dma-names = "tx", "rx";
1024				power-domains = <&rpmhpd SM8250_CX>;
1025				operating-points-v2 = <&qup_opp_table>;
1026				#address-cells = <1>;
1027				#size-cells = <0>;
1028				status = "disabled";
1029			};
1030
1031			i2c16: i2c@888000 {
1032				compatible = "qcom,geni-i2c";
1033				reg = <0 0x00888000 0 0x4000>;
1034				clock-names = "se";
1035				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1036				pinctrl-names = "default";
1037				pinctrl-0 = <&qup_i2c16_default>;
1038				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1039				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
1040				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
1041				dma-names = "tx", "rx";
1042				#address-cells = <1>;
1043				#size-cells = <0>;
1044				status = "disabled";
1045			};
1046
1047			spi16: spi@888000 {
1048				compatible = "qcom,geni-spi";
1049				reg = <0 0x00888000 0 0x4000>;
1050				clock-names = "se";
1051				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1052				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1053				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
1054				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
1055				dma-names = "tx", "rx";
1056				power-domains = <&rpmhpd SM8250_CX>;
1057				operating-points-v2 = <&qup_opp_table>;
1058				#address-cells = <1>;
1059				#size-cells = <0>;
1060				status = "disabled";
1061			};
1062
1063			i2c17: i2c@88c000 {
1064				compatible = "qcom,geni-i2c";
1065				reg = <0 0x0088c000 0 0x4000>;
1066				clock-names = "se";
1067				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1068				pinctrl-names = "default";
1069				pinctrl-0 = <&qup_i2c17_default>;
1070				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1071				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
1072				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
1073				dma-names = "tx", "rx";
1074				#address-cells = <1>;
1075				#size-cells = <0>;
1076				status = "disabled";
1077			};
1078
1079			spi17: spi@88c000 {
1080				compatible = "qcom,geni-spi";
1081				reg = <0 0x0088c000 0 0x4000>;
1082				clock-names = "se";
1083				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1084				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1085				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
1086				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
1087				dma-names = "tx", "rx";
1088				power-domains = <&rpmhpd SM8250_CX>;
1089				operating-points-v2 = <&qup_opp_table>;
1090				#address-cells = <1>;
1091				#size-cells = <0>;
1092				status = "disabled";
1093			};
1094
1095			uart17: serial@88c000 {
1096				compatible = "qcom,geni-uart";
1097				reg = <0 0x0088c000 0 0x4000>;
1098				clock-names = "se";
1099				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1100				pinctrl-names = "default";
1101				pinctrl-0 = <&qup_uart17_default>;
1102				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1103				power-domains = <&rpmhpd SM8250_CX>;
1104				operating-points-v2 = <&qup_opp_table>;
1105				status = "disabled";
1106			};
1107
1108			i2c18: i2c@890000 {
1109				compatible = "qcom,geni-i2c";
1110				reg = <0 0x00890000 0 0x4000>;
1111				clock-names = "se";
1112				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1113				pinctrl-names = "default";
1114				pinctrl-0 = <&qup_i2c18_default>;
1115				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1116				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1117				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1118				dma-names = "tx", "rx";
1119				#address-cells = <1>;
1120				#size-cells = <0>;
1121				status = "disabled";
1122			};
1123
1124			spi18: spi@890000 {
1125				compatible = "qcom,geni-spi";
1126				reg = <0 0x00890000 0 0x4000>;
1127				clock-names = "se";
1128				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1129				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1130				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
1131				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
1132				dma-names = "tx", "rx";
1133				power-domains = <&rpmhpd SM8250_CX>;
1134				operating-points-v2 = <&qup_opp_table>;
1135				#address-cells = <1>;
1136				#size-cells = <0>;
1137				status = "disabled";
1138			};
1139
1140			uart18: serial@890000 {
1141				compatible = "qcom,geni-uart";
1142				reg = <0 0x00890000 0 0x4000>;
1143				clock-names = "se";
1144				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1145				pinctrl-names = "default";
1146				pinctrl-0 = <&qup_uart18_default>;
1147				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1148				power-domains = <&rpmhpd SM8250_CX>;
1149				operating-points-v2 = <&qup_opp_table>;
1150				status = "disabled";
1151			};
1152
1153			i2c19: i2c@894000 {
1154				compatible = "qcom,geni-i2c";
1155				reg = <0 0x00894000 0 0x4000>;
1156				clock-names = "se";
1157				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1158				pinctrl-names = "default";
1159				pinctrl-0 = <&qup_i2c19_default>;
1160				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1161				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1162				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1163				dma-names = "tx", "rx";
1164				#address-cells = <1>;
1165				#size-cells = <0>;
1166				status = "disabled";
1167			};
1168
1169			spi19: spi@894000 {
1170				compatible = "qcom,geni-spi";
1171				reg = <0 0x00894000 0 0x4000>;
1172				clock-names = "se";
1173				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1174				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1175				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1176				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1177				dma-names = "tx", "rx";
1178				power-domains = <&rpmhpd SM8250_CX>;
1179				operating-points-v2 = <&qup_opp_table>;
1180				#address-cells = <1>;
1181				#size-cells = <0>;
1182				status = "disabled";
1183			};
1184		};
1185
1186		gpi_dma0: dma-controller@900000 {
1187			compatible = "qcom,sm8250-gpi-dma";
1188			reg = <0 0x00900000 0 0x70000>;
1189			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1190				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1191				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
1192				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1193				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1194				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1195				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1196				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1197				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1198				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1199				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1200				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
1201				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
1202			dma-channels = <15>;
1203			dma-channel-mask = <0x7ff>;
1204			iommus = <&apps_smmu 0x5b6 0x0>;
1205			#dma-cells = <3>;
1206			status = "disabled";
1207		};
1208
1209		qupv3_id_0: geniqup@9c0000 {
1210			compatible = "qcom,geni-se-qup";
1211			reg = <0x0 0x009c0000 0x0 0x6000>;
1212			clock-names = "m-ahb", "s-ahb";
1213			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1214				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1215			#address-cells = <2>;
1216			#size-cells = <2>;
1217			iommus = <&apps_smmu 0x5a3 0x0>;
1218			ranges;
1219			status = "disabled";
1220
1221			i2c0: i2c@980000 {
1222				compatible = "qcom,geni-i2c";
1223				reg = <0 0x00980000 0 0x4000>;
1224				clock-names = "se";
1225				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1226				pinctrl-names = "default";
1227				pinctrl-0 = <&qup_i2c0_default>;
1228				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1229				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1230				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1231				dma-names = "tx", "rx";
1232				#address-cells = <1>;
1233				#size-cells = <0>;
1234				status = "disabled";
1235			};
1236
1237			spi0: spi@980000 {
1238				compatible = "qcom,geni-spi";
1239				reg = <0 0x00980000 0 0x4000>;
1240				clock-names = "se";
1241				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1242				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1243				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1244				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1245				dma-names = "tx", "rx";
1246				power-domains = <&rpmhpd SM8250_CX>;
1247				operating-points-v2 = <&qup_opp_table>;
1248				#address-cells = <1>;
1249				#size-cells = <0>;
1250				status = "disabled";
1251			};
1252
1253			i2c1: i2c@984000 {
1254				compatible = "qcom,geni-i2c";
1255				reg = <0 0x00984000 0 0x4000>;
1256				clock-names = "se";
1257				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1258				pinctrl-names = "default";
1259				pinctrl-0 = <&qup_i2c1_default>;
1260				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1261				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1262				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1263				dma-names = "tx", "rx";
1264				#address-cells = <1>;
1265				#size-cells = <0>;
1266				status = "disabled";
1267			};
1268
1269			spi1: spi@984000 {
1270				compatible = "qcom,geni-spi";
1271				reg = <0 0x00984000 0 0x4000>;
1272				clock-names = "se";
1273				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1274				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1275				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1276				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1277				dma-names = "tx", "rx";
1278				power-domains = <&rpmhpd SM8250_CX>;
1279				operating-points-v2 = <&qup_opp_table>;
1280				#address-cells = <1>;
1281				#size-cells = <0>;
1282				status = "disabled";
1283			};
1284
1285			i2c2: i2c@988000 {
1286				compatible = "qcom,geni-i2c";
1287				reg = <0 0x00988000 0 0x4000>;
1288				clock-names = "se";
1289				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1290				pinctrl-names = "default";
1291				pinctrl-0 = <&qup_i2c2_default>;
1292				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1293				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1294				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1295				dma-names = "tx", "rx";
1296				#address-cells = <1>;
1297				#size-cells = <0>;
1298				status = "disabled";
1299			};
1300
1301			spi2: spi@988000 {
1302				compatible = "qcom,geni-spi";
1303				reg = <0 0x00988000 0 0x4000>;
1304				clock-names = "se";
1305				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1306				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1307				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1308				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1309				dma-names = "tx", "rx";
1310				power-domains = <&rpmhpd SM8250_CX>;
1311				operating-points-v2 = <&qup_opp_table>;
1312				#address-cells = <1>;
1313				#size-cells = <0>;
1314				status = "disabled";
1315			};
1316
1317			uart2: serial@988000 {
1318				compatible = "qcom,geni-debug-uart";
1319				reg = <0 0x00988000 0 0x4000>;
1320				clock-names = "se";
1321				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1322				pinctrl-names = "default";
1323				pinctrl-0 = <&qup_uart2_default>;
1324				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1325				power-domains = <&rpmhpd SM8250_CX>;
1326				operating-points-v2 = <&qup_opp_table>;
1327				status = "disabled";
1328			};
1329
1330			i2c3: i2c@98c000 {
1331				compatible = "qcom,geni-i2c";
1332				reg = <0 0x0098c000 0 0x4000>;
1333				clock-names = "se";
1334				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1335				pinctrl-names = "default";
1336				pinctrl-0 = <&qup_i2c3_default>;
1337				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1338				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1339				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1340				dma-names = "tx", "rx";
1341				#address-cells = <1>;
1342				#size-cells = <0>;
1343				status = "disabled";
1344			};
1345
1346			spi3: spi@98c000 {
1347				compatible = "qcom,geni-spi";
1348				reg = <0 0x0098c000 0 0x4000>;
1349				clock-names = "se";
1350				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1351				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1352				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1353				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1354				dma-names = "tx", "rx";
1355				power-domains = <&rpmhpd SM8250_CX>;
1356				operating-points-v2 = <&qup_opp_table>;
1357				#address-cells = <1>;
1358				#size-cells = <0>;
1359				status = "disabled";
1360			};
1361
1362			i2c4: i2c@990000 {
1363				compatible = "qcom,geni-i2c";
1364				reg = <0 0x00990000 0 0x4000>;
1365				clock-names = "se";
1366				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1367				pinctrl-names = "default";
1368				pinctrl-0 = <&qup_i2c4_default>;
1369				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1370				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1371				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1372				dma-names = "tx", "rx";
1373				#address-cells = <1>;
1374				#size-cells = <0>;
1375				status = "disabled";
1376			};
1377
1378			spi4: spi@990000 {
1379				compatible = "qcom,geni-spi";
1380				reg = <0 0x00990000 0 0x4000>;
1381				clock-names = "se";
1382				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1383				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1384				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1385				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1386				dma-names = "tx", "rx";
1387				power-domains = <&rpmhpd SM8250_CX>;
1388				operating-points-v2 = <&qup_opp_table>;
1389				#address-cells = <1>;
1390				#size-cells = <0>;
1391				status = "disabled";
1392			};
1393
1394			i2c5: i2c@994000 {
1395				compatible = "qcom,geni-i2c";
1396				reg = <0 0x00994000 0 0x4000>;
1397				clock-names = "se";
1398				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1399				pinctrl-names = "default";
1400				pinctrl-0 = <&qup_i2c5_default>;
1401				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1402				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1403				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1404				dma-names = "tx", "rx";
1405				#address-cells = <1>;
1406				#size-cells = <0>;
1407				status = "disabled";
1408			};
1409
1410			spi5: spi@994000 {
1411				compatible = "qcom,geni-spi";
1412				reg = <0 0x00994000 0 0x4000>;
1413				clock-names = "se";
1414				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1415				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1416				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1417				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1418				dma-names = "tx", "rx";
1419				power-domains = <&rpmhpd SM8250_CX>;
1420				operating-points-v2 = <&qup_opp_table>;
1421				#address-cells = <1>;
1422				#size-cells = <0>;
1423				status = "disabled";
1424			};
1425
1426			i2c6: i2c@998000 {
1427				compatible = "qcom,geni-i2c";
1428				reg = <0 0x00998000 0 0x4000>;
1429				clock-names = "se";
1430				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1431				pinctrl-names = "default";
1432				pinctrl-0 = <&qup_i2c6_default>;
1433				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1434				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1435				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1436				dma-names = "tx", "rx";
1437				#address-cells = <1>;
1438				#size-cells = <0>;
1439				status = "disabled";
1440			};
1441
1442			spi6: spi@998000 {
1443				compatible = "qcom,geni-spi";
1444				reg = <0 0x00998000 0 0x4000>;
1445				clock-names = "se";
1446				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1447				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1448				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1449				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1450				dma-names = "tx", "rx";
1451				power-domains = <&rpmhpd SM8250_CX>;
1452				operating-points-v2 = <&qup_opp_table>;
1453				#address-cells = <1>;
1454				#size-cells = <0>;
1455				status = "disabled";
1456			};
1457
1458			uart6: serial@998000 {
1459				compatible = "qcom,geni-uart";
1460				reg = <0 0x00998000 0 0x4000>;
1461				clock-names = "se";
1462				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1463				pinctrl-names = "default";
1464				pinctrl-0 = <&qup_uart6_default>;
1465				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1466				power-domains = <&rpmhpd SM8250_CX>;
1467				operating-points-v2 = <&qup_opp_table>;
1468				status = "disabled";
1469			};
1470
1471			i2c7: i2c@99c000 {
1472				compatible = "qcom,geni-i2c";
1473				reg = <0 0x0099c000 0 0x4000>;
1474				clock-names = "se";
1475				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1476				pinctrl-names = "default";
1477				pinctrl-0 = <&qup_i2c7_default>;
1478				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1479				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
1480				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
1481				dma-names = "tx", "rx";
1482				#address-cells = <1>;
1483				#size-cells = <0>;
1484				status = "disabled";
1485			};
1486
1487			spi7: spi@99c000 {
1488				compatible = "qcom,geni-spi";
1489				reg = <0 0x0099c000 0 0x4000>;
1490				clock-names = "se";
1491				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1492				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1493				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
1494				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
1495				dma-names = "tx", "rx";
1496				power-domains = <&rpmhpd SM8250_CX>;
1497				operating-points-v2 = <&qup_opp_table>;
1498				#address-cells = <1>;
1499				#size-cells = <0>;
1500				status = "disabled";
1501			};
1502		};
1503
1504		gpi_dma1: dma-controller@a00000 {
1505			compatible = "qcom,sm8250-gpi-dma";
1506			reg = <0 0x00a00000 0 0x70000>;
1507			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1508				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1509				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1510				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1511				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1512				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1513				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1514				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1515				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1516				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
1517			dma-channels = <10>;
1518			dma-channel-mask = <0x3f>;
1519			iommus = <&apps_smmu 0x56 0x0>;
1520			#dma-cells = <3>;
1521			status = "disabled";
1522		};
1523
1524		qupv3_id_1: geniqup@ac0000 {
1525			compatible = "qcom,geni-se-qup";
1526			reg = <0x0 0x00ac0000 0x0 0x6000>;
1527			clock-names = "m-ahb", "s-ahb";
1528			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1529				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1530			#address-cells = <2>;
1531			#size-cells = <2>;
1532			iommus = <&apps_smmu 0x43 0x0>;
1533			ranges;
1534			status = "disabled";
1535
1536			i2c8: i2c@a80000 {
1537				compatible = "qcom,geni-i2c";
1538				reg = <0 0x00a80000 0 0x4000>;
1539				clock-names = "se";
1540				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1541				pinctrl-names = "default";
1542				pinctrl-0 = <&qup_i2c8_default>;
1543				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1544				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1545				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1546				dma-names = "tx", "rx";
1547				#address-cells = <1>;
1548				#size-cells = <0>;
1549				status = "disabled";
1550			};
1551
1552			spi8: spi@a80000 {
1553				compatible = "qcom,geni-spi";
1554				reg = <0 0x00a80000 0 0x4000>;
1555				clock-names = "se";
1556				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1557				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1558				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1559				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1560				dma-names = "tx", "rx";
1561				power-domains = <&rpmhpd SM8250_CX>;
1562				operating-points-v2 = <&qup_opp_table>;
1563				#address-cells = <1>;
1564				#size-cells = <0>;
1565				status = "disabled";
1566			};
1567
1568			i2c9: i2c@a84000 {
1569				compatible = "qcom,geni-i2c";
1570				reg = <0 0x00a84000 0 0x4000>;
1571				clock-names = "se";
1572				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1573				pinctrl-names = "default";
1574				pinctrl-0 = <&qup_i2c9_default>;
1575				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1576				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1577				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1578				dma-names = "tx", "rx";
1579				#address-cells = <1>;
1580				#size-cells = <0>;
1581				status = "disabled";
1582			};
1583
1584			spi9: spi@a84000 {
1585				compatible = "qcom,geni-spi";
1586				reg = <0 0x00a84000 0 0x4000>;
1587				clock-names = "se";
1588				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1589				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1590				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1591				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1592				dma-names = "tx", "rx";
1593				power-domains = <&rpmhpd SM8250_CX>;
1594				operating-points-v2 = <&qup_opp_table>;
1595				#address-cells = <1>;
1596				#size-cells = <0>;
1597				status = "disabled";
1598			};
1599
1600			i2c10: i2c@a88000 {
1601				compatible = "qcom,geni-i2c";
1602				reg = <0 0x00a88000 0 0x4000>;
1603				clock-names = "se";
1604				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1605				pinctrl-names = "default";
1606				pinctrl-0 = <&qup_i2c10_default>;
1607				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1608				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1609				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1610				dma-names = "tx", "rx";
1611				#address-cells = <1>;
1612				#size-cells = <0>;
1613				status = "disabled";
1614			};
1615
1616			spi10: spi@a88000 {
1617				compatible = "qcom,geni-spi";
1618				reg = <0 0x00a88000 0 0x4000>;
1619				clock-names = "se";
1620				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1621				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1622				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1623				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1624				dma-names = "tx", "rx";
1625				power-domains = <&rpmhpd SM8250_CX>;
1626				operating-points-v2 = <&qup_opp_table>;
1627				#address-cells = <1>;
1628				#size-cells = <0>;
1629				status = "disabled";
1630			};
1631
1632			i2c11: i2c@a8c000 {
1633				compatible = "qcom,geni-i2c";
1634				reg = <0 0x00a8c000 0 0x4000>;
1635				clock-names = "se";
1636				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1637				pinctrl-names = "default";
1638				pinctrl-0 = <&qup_i2c11_default>;
1639				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1640				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1641				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1642				dma-names = "tx", "rx";
1643				#address-cells = <1>;
1644				#size-cells = <0>;
1645				status = "disabled";
1646			};
1647
1648			spi11: spi@a8c000 {
1649				compatible = "qcom,geni-spi";
1650				reg = <0 0x00a8c000 0 0x4000>;
1651				clock-names = "se";
1652				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1653				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1654				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1655				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1656				dma-names = "tx", "rx";
1657				power-domains = <&rpmhpd SM8250_CX>;
1658				operating-points-v2 = <&qup_opp_table>;
1659				#address-cells = <1>;
1660				#size-cells = <0>;
1661				status = "disabled";
1662			};
1663
1664			i2c12: i2c@a90000 {
1665				compatible = "qcom,geni-i2c";
1666				reg = <0 0x00a90000 0 0x4000>;
1667				clock-names = "se";
1668				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1669				pinctrl-names = "default";
1670				pinctrl-0 = <&qup_i2c12_default>;
1671				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1672				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1673				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1674				dma-names = "tx", "rx";
1675				#address-cells = <1>;
1676				#size-cells = <0>;
1677				status = "disabled";
1678			};
1679
1680			spi12: spi@a90000 {
1681				compatible = "qcom,geni-spi";
1682				reg = <0 0x00a90000 0 0x4000>;
1683				clock-names = "se";
1684				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1685				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1686				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1687				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1688				dma-names = "tx", "rx";
1689				power-domains = <&rpmhpd SM8250_CX>;
1690				operating-points-v2 = <&qup_opp_table>;
1691				#address-cells = <1>;
1692				#size-cells = <0>;
1693				status = "disabled";
1694			};
1695
1696			uart12: serial@a90000 {
1697				compatible = "qcom,geni-debug-uart";
1698				reg = <0x0 0x00a90000 0x0 0x4000>;
1699				clock-names = "se";
1700				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1701				pinctrl-names = "default";
1702				pinctrl-0 = <&qup_uart12_default>;
1703				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1704				power-domains = <&rpmhpd SM8250_CX>;
1705				operating-points-v2 = <&qup_opp_table>;
1706				status = "disabled";
1707			};
1708
1709			i2c13: i2c@a94000 {
1710				compatible = "qcom,geni-i2c";
1711				reg = <0 0x00a94000 0 0x4000>;
1712				clock-names = "se";
1713				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1714				pinctrl-names = "default";
1715				pinctrl-0 = <&qup_i2c13_default>;
1716				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1717				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1718				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1719				dma-names = "tx", "rx";
1720				#address-cells = <1>;
1721				#size-cells = <0>;
1722				status = "disabled";
1723			};
1724
1725			spi13: spi@a94000 {
1726				compatible = "qcom,geni-spi";
1727				reg = <0 0x00a94000 0 0x4000>;
1728				clock-names = "se";
1729				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1730				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1731				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1732				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1733				dma-names = "tx", "rx";
1734				power-domains = <&rpmhpd SM8250_CX>;
1735				operating-points-v2 = <&qup_opp_table>;
1736				#address-cells = <1>;
1737				#size-cells = <0>;
1738				status = "disabled";
1739			};
1740		};
1741
1742		config_noc: interconnect@1500000 {
1743			compatible = "qcom,sm8250-config-noc";
1744			reg = <0 0x01500000 0 0xa580>;
1745			#interconnect-cells = <1>;
1746			qcom,bcm-voters = <&apps_bcm_voter>;
1747		};
1748
1749		system_noc: interconnect@1620000 {
1750			compatible = "qcom,sm8250-system-noc";
1751			reg = <0 0x01620000 0 0x1c200>;
1752			#interconnect-cells = <1>;
1753			qcom,bcm-voters = <&apps_bcm_voter>;
1754		};
1755
1756		mc_virt: interconnect@163d000 {
1757			compatible = "qcom,sm8250-mc-virt";
1758			reg = <0 0x0163d000 0 0x1000>;
1759			#interconnect-cells = <1>;
1760			qcom,bcm-voters = <&apps_bcm_voter>;
1761		};
1762
1763		aggre1_noc: interconnect@16e0000 {
1764			compatible = "qcom,sm8250-aggre1-noc";
1765			reg = <0 0x016e0000 0 0x1f180>;
1766			#interconnect-cells = <1>;
1767			qcom,bcm-voters = <&apps_bcm_voter>;
1768		};
1769
1770		aggre2_noc: interconnect@1700000 {
1771			compatible = "qcom,sm8250-aggre2-noc";
1772			reg = <0 0x01700000 0 0x33000>;
1773			#interconnect-cells = <1>;
1774			qcom,bcm-voters = <&apps_bcm_voter>;
1775		};
1776
1777		compute_noc: interconnect@1733000 {
1778			compatible = "qcom,sm8250-compute-noc";
1779			reg = <0 0x01733000 0 0xa180>;
1780			#interconnect-cells = <1>;
1781			qcom,bcm-voters = <&apps_bcm_voter>;
1782		};
1783
1784		mmss_noc: interconnect@1740000 {
1785			compatible = "qcom,sm8250-mmss-noc";
1786			reg = <0 0x01740000 0 0x1f080>;
1787			#interconnect-cells = <1>;
1788			qcom,bcm-voters = <&apps_bcm_voter>;
1789		};
1790
1791		pcie0: pci@1c00000 {
1792			compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1793			reg = <0 0x01c00000 0 0x3000>,
1794			      <0 0x60000000 0 0xf1d>,
1795			      <0 0x60000f20 0 0xa8>,
1796			      <0 0x60001000 0 0x1000>,
1797			      <0 0x60100000 0 0x100000>;
1798			reg-names = "parf", "dbi", "elbi", "atu", "config";
1799			device_type = "pci";
1800			linux,pci-domain = <0>;
1801			bus-range = <0x00 0xff>;
1802			num-lanes = <1>;
1803
1804			#address-cells = <3>;
1805			#size-cells = <2>;
1806
1807			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
1808				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
1809
1810			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1811			interrupt-names = "msi";
1812			#interrupt-cells = <1>;
1813			interrupt-map-mask = <0 0 0 0x7>;
1814			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1815					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1816					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1817					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1818
1819			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1820				 <&gcc GCC_PCIE_0_AUX_CLK>,
1821				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1822				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1823				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1824				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1825				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
1826				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
1827			clock-names = "pipe",
1828				      "aux",
1829				      "cfg",
1830				      "bus_master",
1831				      "bus_slave",
1832				      "slave_q2a",
1833				      "tbu",
1834				      "ddrss_sf_tbu";
1835
1836			iommus = <&apps_smmu 0x1c00 0x7f>;
1837			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
1838				    <0x100 &apps_smmu 0x1c01 0x1>;
1839
1840			resets = <&gcc GCC_PCIE_0_BCR>;
1841			reset-names = "pci";
1842
1843			power-domains = <&gcc PCIE_0_GDSC>;
1844
1845			phys = <&pcie0_lane>;
1846			phy-names = "pciephy";
1847
1848			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
1849			wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
1850
1851			pinctrl-names = "default";
1852			pinctrl-0 = <&pcie0_default_state>;
1853
1854			status = "disabled";
1855		};
1856
1857		pcie0_phy: phy@1c06000 {
1858			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
1859			reg = <0 0x01c06000 0 0x1c0>;
1860			#address-cells = <2>;
1861			#size-cells = <2>;
1862			ranges;
1863			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1864				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1865				 <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
1866				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
1867			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1868
1869			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1870			reset-names = "phy";
1871
1872			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
1873			assigned-clock-rates = <100000000>;
1874
1875			status = "disabled";
1876
1877			pcie0_lane: phy@1c06200 {
1878				reg = <0 0x1c06200 0 0x170>, /* tx */
1879				      <0 0x1c06400 0 0x200>, /* rx */
1880				      <0 0x1c06800 0 0x1f0>, /* pcs */
1881				      <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
1882				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1883				clock-names = "pipe0";
1884
1885				#phy-cells = <0>;
1886				clock-output-names = "pcie_0_pipe_clk";
1887			};
1888		};
1889
1890		pcie1: pci@1c08000 {
1891			compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1892			reg = <0 0x01c08000 0 0x3000>,
1893			      <0 0x40000000 0 0xf1d>,
1894			      <0 0x40000f20 0 0xa8>,
1895			      <0 0x40001000 0 0x1000>,
1896			      <0 0x40100000 0 0x100000>;
1897			reg-names = "parf", "dbi", "elbi", "atu", "config";
1898			device_type = "pci";
1899			linux,pci-domain = <1>;
1900			bus-range = <0x00 0xff>;
1901			num-lanes = <2>;
1902
1903			#address-cells = <3>;
1904			#size-cells = <2>;
1905
1906			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
1907				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1908
1909			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1910			interrupt-names = "msi";
1911			#interrupt-cells = <1>;
1912			interrupt-map-mask = <0 0 0 0x7>;
1913			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1914					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1915					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1916					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1917
1918			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1919				 <&gcc GCC_PCIE_1_AUX_CLK>,
1920				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1921				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1922				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1923				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1924				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
1925				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
1926				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
1927			clock-names = "pipe",
1928				      "aux",
1929				      "cfg",
1930				      "bus_master",
1931				      "bus_slave",
1932				      "slave_q2a",
1933				      "ref",
1934				      "tbu",
1935				      "ddrss_sf_tbu";
1936
1937			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1938			assigned-clock-rates = <19200000>;
1939
1940			iommus = <&apps_smmu 0x1c80 0x7f>;
1941			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
1942				    <0x100 &apps_smmu 0x1c81 0x1>;
1943
1944			resets = <&gcc GCC_PCIE_1_BCR>;
1945			reset-names = "pci";
1946
1947			power-domains = <&gcc PCIE_1_GDSC>;
1948
1949			phys = <&pcie1_lane>;
1950			phy-names = "pciephy";
1951
1952			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
1953			wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
1954
1955			pinctrl-names = "default";
1956			pinctrl-0 = <&pcie1_default_state>;
1957
1958			status = "disabled";
1959		};
1960
1961		pcie1_phy: phy@1c0e000 {
1962			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
1963			reg = <0 0x01c0e000 0 0x1c0>;
1964			#address-cells = <2>;
1965			#size-cells = <2>;
1966			ranges;
1967			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1968				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1969				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
1970				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
1971			clock-names = "aux", "cfg_ahb", "ref", "refgen";
1972
1973			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
1974			reset-names = "phy";
1975
1976			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
1977			assigned-clock-rates = <100000000>;
1978
1979			status = "disabled";
1980
1981			pcie1_lane: phy@1c0e200 {
1982				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
1983				      <0 0x1c0e400 0 0x200>, /* rx0 */
1984				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
1985				      <0 0x1c0e600 0 0x170>, /* tx1 */
1986				      <0 0x1c0e800 0 0x200>, /* rx1 */
1987				      <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
1988				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
1989				clock-names = "pipe0";
1990
1991				#phy-cells = <0>;
1992				clock-output-names = "pcie_1_pipe_clk";
1993			};
1994		};
1995
1996		pcie2: pci@1c10000 {
1997			compatible = "qcom,pcie-sm8250", "snps,dw-pcie";
1998			reg = <0 0x01c10000 0 0x3000>,
1999			      <0 0x64000000 0 0xf1d>,
2000			      <0 0x64000f20 0 0xa8>,
2001			      <0 0x64001000 0 0x1000>,
2002			      <0 0x64100000 0 0x100000>;
2003			reg-names = "parf", "dbi", "elbi", "atu", "config";
2004			device_type = "pci";
2005			linux,pci-domain = <2>;
2006			bus-range = <0x00 0xff>;
2007			num-lanes = <2>;
2008
2009			#address-cells = <3>;
2010			#size-cells = <2>;
2011
2012			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
2013				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
2014
2015			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2016			interrupt-names = "msi";
2017			#interrupt-cells = <1>;
2018			interrupt-map-mask = <0 0 0 0x7>;
2019			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
2020					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
2021					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
2022					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
2023
2024			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
2025				 <&gcc GCC_PCIE_2_AUX_CLK>,
2026				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2027				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
2028				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
2029				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
2030				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
2031				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
2032				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
2033			clock-names = "pipe",
2034				      "aux",
2035				      "cfg",
2036				      "bus_master",
2037				      "bus_slave",
2038				      "slave_q2a",
2039				      "ref",
2040				      "tbu",
2041				      "ddrss_sf_tbu";
2042
2043			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
2044			assigned-clock-rates = <19200000>;
2045
2046			iommus = <&apps_smmu 0x1d00 0x7f>;
2047			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
2048				    <0x100 &apps_smmu 0x1d01 0x1>;
2049
2050			resets = <&gcc GCC_PCIE_2_BCR>;
2051			reset-names = "pci";
2052
2053			power-domains = <&gcc PCIE_2_GDSC>;
2054
2055			phys = <&pcie2_lane>;
2056			phy-names = "pciephy";
2057
2058			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
2059			wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
2060
2061			pinctrl-names = "default";
2062			pinctrl-0 = <&pcie2_default_state>;
2063
2064			status = "disabled";
2065		};
2066
2067		pcie2_phy: phy@1c16000 {
2068			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
2069			reg = <0 0x1c16000 0 0x1c0>;
2070			#address-cells = <2>;
2071			#size-cells = <2>;
2072			ranges;
2073			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
2074				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2075				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
2076				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
2077			clock-names = "aux", "cfg_ahb", "ref", "refgen";
2078
2079			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
2080			reset-names = "phy";
2081
2082			assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
2083			assigned-clock-rates = <100000000>;
2084
2085			status = "disabled";
2086
2087			pcie2_lane: phy@1c16200 {
2088				reg = <0 0x1c16200 0 0x170>, /* tx0 */
2089				      <0 0x1c16400 0 0x200>, /* rx0 */
2090				      <0 0x1c16a00 0 0x1f0>, /* pcs */
2091				      <0 0x1c16600 0 0x170>, /* tx1 */
2092				      <0 0x1c16800 0 0x200>, /* rx1 */
2093				      <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
2094				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
2095				clock-names = "pipe0";
2096
2097				#phy-cells = <0>;
2098				clock-output-names = "pcie_2_pipe_clk";
2099			};
2100		};
2101
2102		ufs_mem_hc: ufshc@1d84000 {
2103			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
2104				     "jedec,ufs-2.0";
2105			reg = <0 0x01d84000 0 0x3000>;
2106			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
2107			phys = <&ufs_mem_phy_lanes>;
2108			phy-names = "ufsphy";
2109			lanes-per-direction = <2>;
2110			#reset-cells = <1>;
2111			resets = <&gcc GCC_UFS_PHY_BCR>;
2112			reset-names = "rst";
2113
2114			power-domains = <&gcc UFS_PHY_GDSC>;
2115
2116			iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>;
2117
2118			clock-names =
2119				"core_clk",
2120				"bus_aggr_clk",
2121				"iface_clk",
2122				"core_clk_unipro",
2123				"ref_clk",
2124				"tx_lane0_sync_clk",
2125				"rx_lane0_sync_clk",
2126				"rx_lane1_sync_clk";
2127			clocks =
2128				<&gcc GCC_UFS_PHY_AXI_CLK>,
2129				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2130				<&gcc GCC_UFS_PHY_AHB_CLK>,
2131				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
2132				<&rpmhcc RPMH_CXO_CLK>,
2133				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
2134				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
2135				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
2136			freq-table-hz =
2137				<37500000 300000000>,
2138				<0 0>,
2139				<0 0>,
2140				<37500000 300000000>,
2141				<0 0>,
2142				<0 0>,
2143				<0 0>,
2144				<0 0>;
2145
2146			status = "disabled";
2147		};
2148
2149		ufs_mem_phy: phy@1d87000 {
2150			compatible = "qcom,sm8250-qmp-ufs-phy";
2151			reg = <0 0x01d87000 0 0x1c0>;
2152			#address-cells = <2>;
2153			#size-cells = <2>;
2154			ranges;
2155			clock-names = "ref",
2156				      "ref_aux";
2157			clocks = <&rpmhcc RPMH_CXO_CLK>,
2158				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
2159
2160			resets = <&ufs_mem_hc 0>;
2161			reset-names = "ufsphy";
2162			status = "disabled";
2163
2164			ufs_mem_phy_lanes: phy@1d87400 {
2165				reg = <0 0x01d87400 0 0x108>,
2166				      <0 0x01d87600 0 0x1e0>,
2167				      <0 0x01d87c00 0 0x1dc>,
2168				      <0 0x01d87800 0 0x108>,
2169				      <0 0x01d87a00 0 0x1e0>;
2170				#phy-cells = <0>;
2171			};
2172		};
2173
2174		ipa_virt: interconnect@1e00000 {
2175			compatible = "qcom,sm8250-ipa-virt";
2176			reg = <0 0x01e00000 0 0x1000>;
2177			#interconnect-cells = <1>;
2178			qcom,bcm-voters = <&apps_bcm_voter>;
2179		};
2180
2181		tcsr_mutex: hwlock@1f40000 {
2182			compatible = "qcom,tcsr-mutex";
2183			reg = <0x0 0x01f40000 0x0 0x40000>;
2184			#hwlock-cells = <1>;
2185		};
2186
2187		wsamacro: codec@3240000 {
2188			compatible = "qcom,sm8250-lpass-wsa-macro";
2189			reg = <0 0x03240000 0 0x1000>;
2190			clocks = <&audiocc 1>,
2191				 <&audiocc 0>,
2192				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2193				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2194				 <&aoncc 0>,
2195				 <&vamacro>;
2196
2197			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
2198
2199			#clock-cells = <0>;
2200			clock-frequency = <9600000>;
2201			clock-output-names = "mclk";
2202			#sound-dai-cells = <1>;
2203
2204			pinctrl-names = "default";
2205			pinctrl-0 = <&wsa_swr_active>;
2206		};
2207
2208		swr0: soundwire-controller@3250000 {
2209			reg = <0 0x03250000 0 0x2000>;
2210			compatible = "qcom,soundwire-v1.5.1";
2211			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
2212			clocks = <&wsamacro>;
2213			clock-names = "iface";
2214
2215			qcom,din-ports = <2>;
2216			qcom,dout-ports = <6>;
2217
2218			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2219			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2220			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2221			qcom,ports-block-pack-mode =	/bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
2222
2223			#sound-dai-cells = <1>;
2224			#address-cells = <2>;
2225			#size-cells = <0>;
2226		};
2227
2228		audiocc: clock-controller@3300000 {
2229			compatible = "qcom,sm8250-lpass-audiocc";
2230			reg = <0 0x03300000 0 0x30000>;
2231			#clock-cells = <1>;
2232			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2233				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2234				<&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2235			clock-names = "core", "audio", "bus";
2236		};
2237
2238		vamacro: codec@3370000 {
2239			compatible = "qcom,sm8250-lpass-va-macro";
2240			reg = <0 0x03370000 0 0x1000>;
2241			clocks = <&aoncc 0>,
2242				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2243				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2244
2245			clock-names = "mclk", "macro", "dcodec";
2246
2247			#clock-cells = <0>;
2248			clock-frequency = <9600000>;
2249			clock-output-names = "fsgen";
2250			#sound-dai-cells = <1>;
2251		};
2252
2253		rxmacro: rxmacro@3200000 {
2254			pinctrl-names = "default";
2255			pinctrl-0 = <&rx_swr_active>;
2256			compatible = "qcom,sm8250-lpass-rx-macro";
2257			reg = <0 0x3200000 0 0x1000>;
2258
2259			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2260				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2261				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2262				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2263				<&vamacro>;
2264
2265			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2266
2267			#clock-cells = <0>;
2268			clock-frequency = <9600000>;
2269			clock-output-names = "mclk";
2270			#sound-dai-cells = <1>;
2271		};
2272
2273		swr1: soundwire-controller@3210000 {
2274			reg = <0 0x3210000 0 0x2000>;
2275			compatible = "qcom,soundwire-v1.5.1";
2276			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
2277			clocks = <&rxmacro>;
2278			clock-names = "iface";
2279			label = "RX";
2280			qcom,din-ports = <0>;
2281			qcom,dout-ports = <5>;
2282
2283			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
2284			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
2285			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
2286			qcom,ports-hstart =		/bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
2287			qcom,ports-hstop =		/bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
2288			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
2289			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
2290			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
2291			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
2292
2293			#sound-dai-cells = <1>;
2294			#address-cells = <2>;
2295			#size-cells = <0>;
2296		};
2297
2298		txmacro: txmacro@3220000 {
2299			pinctrl-names = "default";
2300			pinctrl-0 = <&tx_swr_active>;
2301			compatible = "qcom,sm8250-lpass-tx-macro";
2302			reg = <0 0x3220000 0 0x1000>;
2303
2304			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2305				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2306				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2307				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2308				 <&vamacro>;
2309
2310			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2311
2312			#clock-cells = <0>;
2313			clock-frequency = <9600000>;
2314			clock-output-names = "mclk";
2315			#address-cells = <2>;
2316			#size-cells = <2>;
2317			#sound-dai-cells = <1>;
2318		};
2319
2320		/* tx macro */
2321		swr2: soundwire-controller@3230000 {
2322			reg = <0 0x3230000 0 0x2000>;
2323			compatible = "qcom,soundwire-v1.5.1";
2324			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
2325			interrupt-names = "core";
2326
2327			clocks = <&txmacro>;
2328			clock-names = "iface";
2329			label = "TX";
2330
2331			qcom,din-ports = <5>;
2332			qcom,dout-ports = <0>;
2333			qcom,ports-sinterval-low =	/bits/ 8 <0xFF 0x01 0x01 0x03 0x03>;
2334			qcom,ports-offset1 =		/bits/ 8 <0xFF 0x01 0x00 0x02 0x00>;
2335			qcom,ports-offset2 =		/bits/ 8 <0xFF 0x00 0x00 0x00 0x00>;
2336			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2337			qcom,ports-hstart =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2338			qcom,ports-hstop =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2339			qcom,ports-word-length =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2340			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
2341			qcom,ports-lane-control =	/bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
2342			qcom,port-offset = <1>;
2343			#sound-dai-cells = <1>;
2344			#address-cells = <2>;
2345			#size-cells = <0>;
2346		};
2347
2348		aoncc: clock-controller@3380000 {
2349			compatible = "qcom,sm8250-lpass-aoncc";
2350			reg = <0 0x03380000 0 0x40000>;
2351			#clock-cells = <1>;
2352			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2353				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2354				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2355			clock-names = "core", "audio", "bus";
2356		};
2357
2358		lpass_tlmm: pinctrl@33c0000{
2359			compatible = "qcom,sm8250-lpass-lpi-pinctrl";
2360			reg = <0 0x033c0000 0x0 0x20000>,
2361			      <0 0x03550000 0x0 0x10000>;
2362			gpio-controller;
2363			#gpio-cells = <2>;
2364			gpio-ranges = <&lpass_tlmm 0 0 14>;
2365
2366			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2367				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2368			clock-names = "core", "audio";
2369
2370			wsa_swr_active: wsa-swr-active-pins {
2371				clk {
2372					pins = "gpio10";
2373					function = "wsa_swr_clk";
2374					drive-strength = <2>;
2375					slew-rate = <1>;
2376					bias-disable;
2377				};
2378
2379				data {
2380					pins = "gpio11";
2381					function = "wsa_swr_data";
2382					drive-strength = <2>;
2383					slew-rate = <1>;
2384					bias-bus-hold;
2385
2386				};
2387			};
2388
2389			wsa_swr_sleep: wsa-swr-sleep-pins {
2390				clk {
2391					pins = "gpio10";
2392					function = "wsa_swr_clk";
2393					drive-strength = <2>;
2394					input-enable;
2395					bias-pull-down;
2396				};
2397
2398				data {
2399					pins = "gpio11";
2400					function = "wsa_swr_data";
2401					drive-strength = <2>;
2402					input-enable;
2403					bias-pull-down;
2404
2405				};
2406			};
2407
2408			dmic01_active: dmic01-active-pins {
2409				clk {
2410					pins = "gpio6";
2411					function = "dmic1_clk";
2412					drive-strength = <8>;
2413					output-high;
2414				};
2415				data {
2416					pins = "gpio7";
2417					function = "dmic1_data";
2418					drive-strength = <8>;
2419					input-enable;
2420				};
2421			};
2422
2423			dmic01_sleep: dmic01-sleep-pins {
2424				clk {
2425					pins = "gpio6";
2426					function = "dmic1_clk";
2427					drive-strength = <2>;
2428					bias-disable;
2429					output-low;
2430				};
2431
2432				data {
2433					pins = "gpio7";
2434					function = "dmic1_data";
2435					drive-strength = <2>;
2436					pull-down;
2437					input-enable;
2438				};
2439			};
2440
2441			rx_swr_active: rx_swr-active-pins {
2442				clk {
2443					pins = "gpio3";
2444					function = "swr_rx_clk";
2445					drive-strength = <2>;
2446					slew-rate = <1>;
2447					bias-disable;
2448				};
2449
2450				data {
2451					pins = "gpio4", "gpio5";
2452					function = "swr_rx_data";
2453					drive-strength = <2>;
2454					slew-rate = <1>;
2455					bias-bus-hold;
2456				};
2457			};
2458
2459			tx_swr_active: tx_swr-active-pins {
2460				clk {
2461					pins = "gpio0";
2462					function = "swr_tx_clk";
2463					drive-strength = <2>;
2464					slew-rate = <1>;
2465					bias-disable;
2466				};
2467
2468				data {
2469					pins = "gpio1", "gpio2";
2470					function = "swr_tx_data";
2471					drive-strength = <2>;
2472					slew-rate = <1>;
2473					bias-bus-hold;
2474				};
2475			};
2476
2477			tx_swr_sleep: tx_swr-sleep-pins {
2478				clk {
2479					pins = "gpio0";
2480					function = "swr_tx_clk";
2481					drive-strength = <2>;
2482					input-enable;
2483					bias-pull-down;
2484				};
2485
2486				data1 {
2487					pins = "gpio1";
2488					function = "swr_tx_data";
2489					drive-strength = <2>;
2490					input-enable;
2491					bias-bus-hold;
2492				};
2493
2494				data2 {
2495					pins = "gpio2";
2496					function = "swr_tx_data";
2497					drive-strength = <2>;
2498					input-enable;
2499					bias-pull-down;
2500				};
2501			};
2502		};
2503
2504		gpu: gpu@3d00000 {
2505			compatible = "qcom,adreno-650.2",
2506				     "qcom,adreno";
2507
2508			reg = <0 0x03d00000 0 0x40000>;
2509			reg-names = "kgsl_3d0_reg_memory";
2510
2511			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2512
2513			iommus = <&adreno_smmu 0 0x401>;
2514
2515			operating-points-v2 = <&gpu_opp_table>;
2516
2517			qcom,gmu = <&gmu>;
2518
2519			status = "disabled";
2520
2521			zap-shader {
2522				memory-region = <&gpu_mem>;
2523			};
2524
2525			/* note: downstream checks gpu binning for 670 Mhz */
2526			gpu_opp_table: opp-table {
2527				compatible = "operating-points-v2";
2528
2529				opp-670000000 {
2530					opp-hz = /bits/ 64 <670000000>;
2531					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2532				};
2533
2534				opp-587000000 {
2535					opp-hz = /bits/ 64 <587000000>;
2536					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2537				};
2538
2539				opp-525000000 {
2540					opp-hz = /bits/ 64 <525000000>;
2541					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
2542				};
2543
2544				opp-490000000 {
2545					opp-hz = /bits/ 64 <490000000>;
2546					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2547				};
2548
2549				opp-441600000 {
2550					opp-hz = /bits/ 64 <441600000>;
2551					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
2552				};
2553
2554				opp-400000000 {
2555					opp-hz = /bits/ 64 <400000000>;
2556					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2557				};
2558
2559				opp-305000000 {
2560					opp-hz = /bits/ 64 <305000000>;
2561					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2562				};
2563			};
2564		};
2565
2566		gmu: gmu@3d6a000 {
2567			compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
2568
2569			reg = <0 0x03d6a000 0 0x30000>,
2570			      <0 0x3de0000 0 0x10000>,
2571			      <0 0xb290000 0 0x10000>,
2572			      <0 0xb490000 0 0x10000>;
2573			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
2574
2575			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2576				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2577			interrupt-names = "hfi", "gmu";
2578
2579			clocks = <&gpucc GPU_CC_AHB_CLK>,
2580				 <&gpucc GPU_CC_CX_GMU_CLK>,
2581				 <&gpucc GPU_CC_CXO_CLK>,
2582				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2583				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2584			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
2585
2586			power-domains = <&gpucc GPU_CX_GDSC>,
2587					<&gpucc GPU_GX_GDSC>;
2588			power-domain-names = "cx", "gx";
2589
2590			iommus = <&adreno_smmu 5 0x400>;
2591
2592			operating-points-v2 = <&gmu_opp_table>;
2593
2594			status = "disabled";
2595
2596			gmu_opp_table: opp-table {
2597				compatible = "operating-points-v2";
2598
2599				opp-200000000 {
2600					opp-hz = /bits/ 64 <200000000>;
2601					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2602				};
2603			};
2604		};
2605
2606		gpucc: clock-controller@3d90000 {
2607			compatible = "qcom,sm8250-gpucc";
2608			reg = <0 0x03d90000 0 0x9000>;
2609			clocks = <&rpmhcc RPMH_CXO_CLK>,
2610				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2611				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2612			clock-names = "bi_tcxo",
2613				      "gcc_gpu_gpll0_clk_src",
2614				      "gcc_gpu_gpll0_div_clk_src";
2615			#clock-cells = <1>;
2616			#reset-cells = <1>;
2617			#power-domain-cells = <1>;
2618		};
2619
2620		adreno_smmu: iommu@3da0000 {
2621			compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
2622			reg = <0 0x03da0000 0 0x10000>;
2623			#iommu-cells = <2>;
2624			#global-interrupts = <2>;
2625			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
2626				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
2627				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
2628				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
2629				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
2630				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
2631				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
2632				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
2633				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
2634				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
2635			clocks = <&gpucc GPU_CC_AHB_CLK>,
2636				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2637				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
2638			clock-names = "ahb", "bus", "iface";
2639
2640			power-domains = <&gpucc GPU_CX_GDSC>;
2641		};
2642
2643		slpi: remoteproc@5c00000 {
2644			compatible = "qcom,sm8250-slpi-pas";
2645			reg = <0 0x05c00000 0 0x4000>;
2646
2647			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
2648					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2649					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2650					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2651					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2652			interrupt-names = "wdog", "fatal", "ready",
2653					  "handover", "stop-ack";
2654
2655			clocks = <&rpmhcc RPMH_CXO_CLK>;
2656			clock-names = "xo";
2657
2658			power-domains = <&rpmhpd SM8250_LCX>,
2659					<&rpmhpd SM8250_LMX>;
2660			power-domain-names = "lcx", "lmx";
2661
2662			memory-region = <&slpi_mem>;
2663
2664			qcom,qmp = <&aoss_qmp>;
2665
2666			qcom,smem-states = <&smp2p_slpi_out 0>;
2667			qcom,smem-state-names = "stop";
2668
2669			status = "disabled";
2670
2671			glink-edge {
2672				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2673							     IPCC_MPROC_SIGNAL_GLINK_QMP
2674							     IRQ_TYPE_EDGE_RISING>;
2675				mboxes = <&ipcc IPCC_CLIENT_SLPI
2676						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2677
2678				label = "slpi";
2679				qcom,remote-pid = <3>;
2680
2681				fastrpc {
2682					compatible = "qcom,fastrpc";
2683					qcom,glink-channels = "fastrpcglink-apps-dsp";
2684					label = "sdsp";
2685					qcom,non-secure-domain;
2686					#address-cells = <1>;
2687					#size-cells = <0>;
2688
2689					compute-cb@1 {
2690						compatible = "qcom,fastrpc-compute-cb";
2691						reg = <1>;
2692						iommus = <&apps_smmu 0x0541 0x0>;
2693					};
2694
2695					compute-cb@2 {
2696						compatible = "qcom,fastrpc-compute-cb";
2697						reg = <2>;
2698						iommus = <&apps_smmu 0x0542 0x0>;
2699					};
2700
2701					compute-cb@3 {
2702						compatible = "qcom,fastrpc-compute-cb";
2703						reg = <3>;
2704						iommus = <&apps_smmu 0x0543 0x0>;
2705						/* note: shared-cb = <4> in downstream */
2706					};
2707				};
2708			};
2709		};
2710
2711		cdsp: remoteproc@8300000 {
2712			compatible = "qcom,sm8250-cdsp-pas";
2713			reg = <0 0x08300000 0 0x10000>;
2714
2715			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
2716					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2717					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2718					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2719					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2720			interrupt-names = "wdog", "fatal", "ready",
2721					  "handover", "stop-ack";
2722
2723			clocks = <&rpmhcc RPMH_CXO_CLK>;
2724			clock-names = "xo";
2725
2726			power-domains = <&rpmhpd SM8250_CX>;
2727
2728			memory-region = <&cdsp_mem>;
2729
2730			qcom,qmp = <&aoss_qmp>;
2731
2732			qcom,smem-states = <&smp2p_cdsp_out 0>;
2733			qcom,smem-state-names = "stop";
2734
2735			status = "disabled";
2736
2737			glink-edge {
2738				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2739							     IPCC_MPROC_SIGNAL_GLINK_QMP
2740							     IRQ_TYPE_EDGE_RISING>;
2741				mboxes = <&ipcc IPCC_CLIENT_CDSP
2742						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2743
2744				label = "cdsp";
2745				qcom,remote-pid = <5>;
2746
2747				fastrpc {
2748					compatible = "qcom,fastrpc";
2749					qcom,glink-channels = "fastrpcglink-apps-dsp";
2750					label = "cdsp";
2751					qcom,non-secure-domain;
2752					#address-cells = <1>;
2753					#size-cells = <0>;
2754
2755					compute-cb@1 {
2756						compatible = "qcom,fastrpc-compute-cb";
2757						reg = <1>;
2758						iommus = <&apps_smmu 0x1001 0x0460>;
2759					};
2760
2761					compute-cb@2 {
2762						compatible = "qcom,fastrpc-compute-cb";
2763						reg = <2>;
2764						iommus = <&apps_smmu 0x1002 0x0460>;
2765					};
2766
2767					compute-cb@3 {
2768						compatible = "qcom,fastrpc-compute-cb";
2769						reg = <3>;
2770						iommus = <&apps_smmu 0x1003 0x0460>;
2771					};
2772
2773					compute-cb@4 {
2774						compatible = "qcom,fastrpc-compute-cb";
2775						reg = <4>;
2776						iommus = <&apps_smmu 0x1004 0x0460>;
2777					};
2778
2779					compute-cb@5 {
2780						compatible = "qcom,fastrpc-compute-cb";
2781						reg = <5>;
2782						iommus = <&apps_smmu 0x1005 0x0460>;
2783					};
2784
2785					compute-cb@6 {
2786						compatible = "qcom,fastrpc-compute-cb";
2787						reg = <6>;
2788						iommus = <&apps_smmu 0x1006 0x0460>;
2789					};
2790
2791					compute-cb@7 {
2792						compatible = "qcom,fastrpc-compute-cb";
2793						reg = <7>;
2794						iommus = <&apps_smmu 0x1007 0x0460>;
2795					};
2796
2797					compute-cb@8 {
2798						compatible = "qcom,fastrpc-compute-cb";
2799						reg = <8>;
2800						iommus = <&apps_smmu 0x1008 0x0460>;
2801					};
2802
2803					/* note: secure cb9 in downstream */
2804				};
2805			};
2806		};
2807
2808		sound: sound {
2809		};
2810
2811		usb_1_hsphy: phy@88e3000 {
2812			compatible = "qcom,sm8250-usb-hs-phy",
2813				     "qcom,usb-snps-hs-7nm-phy";
2814			reg = <0 0x088e3000 0 0x400>;
2815			status = "disabled";
2816			#phy-cells = <0>;
2817
2818			clocks = <&rpmhcc RPMH_CXO_CLK>;
2819			clock-names = "ref";
2820
2821			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2822		};
2823
2824		usb_2_hsphy: phy@88e4000 {
2825			compatible = "qcom,sm8250-usb-hs-phy",
2826				     "qcom,usb-snps-hs-7nm-phy";
2827			reg = <0 0x088e4000 0 0x400>;
2828			status = "disabled";
2829			#phy-cells = <0>;
2830
2831			clocks = <&rpmhcc RPMH_CXO_CLK>;
2832			clock-names = "ref";
2833
2834			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2835		};
2836
2837		usb_1_qmpphy: phy@88e9000 {
2838			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
2839			reg = <0 0x088e9000 0 0x200>,
2840			      <0 0x088e8000 0 0x40>,
2841			      <0 0x088ea000 0 0x200>;
2842			status = "disabled";
2843			#address-cells = <2>;
2844			#size-cells = <2>;
2845			ranges;
2846
2847			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2848				 <&rpmhcc RPMH_CXO_CLK>,
2849				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2850			clock-names = "aux", "ref_clk_src", "com_aux";
2851
2852			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2853				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
2854			reset-names = "phy", "common";
2855
2856			usb_1_ssphy: usb3-phy@88e9200 {
2857				reg = <0 0x088e9200 0 0x200>,
2858				      <0 0x088e9400 0 0x200>,
2859				      <0 0x088e9c00 0 0x400>,
2860				      <0 0x088e9600 0 0x200>,
2861				      <0 0x088e9800 0 0x200>,
2862				      <0 0x088e9a00 0 0x100>;
2863				#clock-cells = <0>;
2864				#phy-cells = <0>;
2865				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2866				clock-names = "pipe0";
2867				clock-output-names = "usb3_phy_pipe_clk_src";
2868			};
2869
2870			dp_phy: dp-phy@88ea200 {
2871				reg = <0 0x088ea200 0 0x200>,
2872				      <0 0x088ea400 0 0x200>,
2873				      <0 0x088eac00 0 0x400>,
2874				      <0 0x088ea600 0 0x200>,
2875				      <0 0x088ea800 0 0x200>,
2876				      <0 0x088eaa00 0 0x100>;
2877				#phy-cells = <0>;
2878				#clock-cells = <1>;
2879				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2880				clock-names = "pipe0";
2881				clock-output-names = "usb3_phy_pipe_clk_src";
2882			};
2883		};
2884
2885		usb_2_qmpphy: phy@88eb000 {
2886			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
2887			reg = <0 0x088eb000 0 0x200>;
2888			status = "disabled";
2889			#address-cells = <2>;
2890			#size-cells = <2>;
2891			ranges;
2892
2893			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
2894				 <&rpmhcc RPMH_CXO_CLK>,
2895				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
2896				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
2897			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
2898
2899			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
2900				 <&gcc GCC_USB3_PHY_SEC_BCR>;
2901			reset-names = "phy", "common";
2902
2903			usb_2_ssphy: phy@88eb200 {
2904				reg = <0 0x088eb200 0 0x200>,
2905				      <0 0x088eb400 0 0x200>,
2906				      <0 0x088eb800 0 0x800>;
2907				#clock-cells = <0>;
2908				#phy-cells = <0>;
2909				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
2910				clock-names = "pipe0";
2911				clock-output-names = "usb3_uni_phy_pipe_clk_src";
2912			};
2913		};
2914
2915		sdhc_2: sdhci@8804000 {
2916			compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
2917			reg = <0 0x08804000 0 0x1000>;
2918
2919			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
2920				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
2921			interrupt-names = "hc_irq", "pwr_irq";
2922
2923			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2924				 <&gcc GCC_SDCC2_APPS_CLK>,
2925				 <&rpmhcc RPMH_CXO_CLK>;
2926			clock-names = "iface", "core", "xo";
2927			iommus = <&apps_smmu 0x4a0 0x0>;
2928			qcom,dll-config = <0x0007642c>;
2929			qcom,ddr-config = <0x80040868>;
2930			power-domains = <&rpmhpd SM8250_CX>;
2931			operating-points-v2 = <&sdhc2_opp_table>;
2932
2933			status = "disabled";
2934
2935			sdhc2_opp_table: sdhc2-opp-table {
2936				compatible = "operating-points-v2";
2937
2938				opp-19200000 {
2939					opp-hz = /bits/ 64 <19200000>;
2940					required-opps = <&rpmhpd_opp_min_svs>;
2941				};
2942
2943				opp-50000000 {
2944					opp-hz = /bits/ 64 <50000000>;
2945					required-opps = <&rpmhpd_opp_low_svs>;
2946				};
2947
2948				opp-100000000 {
2949					opp-hz = /bits/ 64 <100000000>;
2950					required-opps = <&rpmhpd_opp_svs>;
2951				};
2952
2953				opp-202000000 {
2954					opp-hz = /bits/ 64 <202000000>;
2955					required-opps = <&rpmhpd_opp_svs_l1>;
2956				};
2957			};
2958		};
2959
2960		dc_noc: interconnect@90c0000 {
2961			compatible = "qcom,sm8250-dc-noc";
2962			reg = <0 0x090c0000 0 0x4200>;
2963			#interconnect-cells = <1>;
2964			qcom,bcm-voters = <&apps_bcm_voter>;
2965		};
2966
2967		gem_noc: interconnect@9100000 {
2968			compatible = "qcom,sm8250-gem-noc";
2969			reg = <0 0x09100000 0 0xb4000>;
2970			#interconnect-cells = <1>;
2971			qcom,bcm-voters = <&apps_bcm_voter>;
2972		};
2973
2974		npu_noc: interconnect@9990000 {
2975			compatible = "qcom,sm8250-npu-noc";
2976			reg = <0 0x09990000 0 0x1600>;
2977			#interconnect-cells = <1>;
2978			qcom,bcm-voters = <&apps_bcm_voter>;
2979		};
2980
2981		usb_1: usb@a6f8800 {
2982			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
2983			reg = <0 0x0a6f8800 0 0x400>;
2984			status = "disabled";
2985			#address-cells = <2>;
2986			#size-cells = <2>;
2987			ranges;
2988			dma-ranges;
2989
2990			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2991				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2992				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2993				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2994				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2995				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
2996			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2997				      "sleep", "xo";
2998
2999			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3000					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
3001			assigned-clock-rates = <19200000>, <200000000>;
3002
3003			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
3004					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
3005					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
3006					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
3007			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
3008					  "dm_hs_phy_irq", "ss_phy_irq";
3009
3010			power-domains = <&gcc USB30_PRIM_GDSC>;
3011
3012			resets = <&gcc GCC_USB30_PRIM_BCR>;
3013
3014			usb_1_dwc3: usb@a600000 {
3015				compatible = "snps,dwc3";
3016				reg = <0 0x0a600000 0 0xcd00>;
3017				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3018				iommus = <&apps_smmu 0x0 0x0>;
3019				snps,dis_u2_susphy_quirk;
3020				snps,dis_enblslpm_quirk;
3021				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
3022				phy-names = "usb2-phy", "usb3-phy";
3023			};
3024		};
3025
3026		system-cache-controller@9200000 {
3027			compatible = "qcom,sm8250-llcc";
3028			reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
3029			reg-names = "llcc_base", "llcc_broadcast_base";
3030		};
3031
3032		usb_2: usb@a8f8800 {
3033			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
3034			reg = <0 0x0a8f8800 0 0x400>;
3035			status = "disabled";
3036			#address-cells = <2>;
3037			#size-cells = <2>;
3038			ranges;
3039			dma-ranges;
3040
3041			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
3042				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
3043				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
3044				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3045				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
3046				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
3047			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
3048				      "sleep", "xo";
3049
3050			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3051					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
3052			assigned-clock-rates = <19200000>, <200000000>;
3053
3054			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
3055					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
3056					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
3057					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
3058			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
3059					  "dm_hs_phy_irq", "ss_phy_irq";
3060
3061			power-domains = <&gcc USB30_SEC_GDSC>;
3062
3063			resets = <&gcc GCC_USB30_SEC_BCR>;
3064
3065			usb_2_dwc3: usb@a800000 {
3066				compatible = "snps,dwc3";
3067				reg = <0 0x0a800000 0 0xcd00>;
3068				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
3069				iommus = <&apps_smmu 0x20 0>;
3070				snps,dis_u2_susphy_quirk;
3071				snps,dis_enblslpm_quirk;
3072				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
3073				phy-names = "usb2-phy", "usb3-phy";
3074			};
3075		};
3076
3077		venus: video-codec@aa00000 {
3078			compatible = "qcom,sm8250-venus";
3079			reg = <0 0x0aa00000 0 0x100000>;
3080			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
3081			power-domains = <&videocc MVS0C_GDSC>,
3082					<&videocc MVS0_GDSC>,
3083					<&rpmhpd SM8250_MX>;
3084			power-domain-names = "venus", "vcodec0", "mx";
3085			operating-points-v2 = <&venus_opp_table>;
3086
3087			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
3088				 <&videocc VIDEO_CC_MVS0C_CLK>,
3089				 <&videocc VIDEO_CC_MVS0_CLK>;
3090			clock-names = "iface", "core", "vcodec0_core";
3091
3092			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
3093					<&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
3094			interconnect-names = "cpu-cfg", "video-mem";
3095
3096			iommus = <&apps_smmu 0x2100 0x0400>;
3097			memory-region = <&video_mem>;
3098
3099			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
3100				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
3101			reset-names = "bus", "core";
3102
3103			status = "disabled";
3104
3105			video-decoder {
3106				compatible = "venus-decoder";
3107			};
3108
3109			video-encoder {
3110				compatible = "venus-encoder";
3111			};
3112
3113			venus_opp_table: venus-opp-table {
3114				compatible = "operating-points-v2";
3115
3116				opp-720000000 {
3117					opp-hz = /bits/ 64 <720000000>;
3118					required-opps = <&rpmhpd_opp_low_svs>;
3119				};
3120
3121				opp-1014000000 {
3122					opp-hz = /bits/ 64 <1014000000>;
3123					required-opps = <&rpmhpd_opp_svs>;
3124				};
3125
3126				opp-1098000000 {
3127					opp-hz = /bits/ 64 <1098000000>;
3128					required-opps = <&rpmhpd_opp_svs_l1>;
3129				};
3130
3131				opp-1332000000 {
3132					opp-hz = /bits/ 64 <1332000000>;
3133					required-opps = <&rpmhpd_opp_nom>;
3134				};
3135			};
3136		};
3137
3138		videocc: clock-controller@abf0000 {
3139			compatible = "qcom,sm8250-videocc";
3140			reg = <0 0x0abf0000 0 0x10000>;
3141			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
3142				 <&rpmhcc RPMH_CXO_CLK>,
3143				 <&rpmhcc RPMH_CXO_CLK_A>;
3144			power-domains = <&rpmhpd SM8250_MMCX>;
3145			required-opps = <&rpmhpd_opp_low_svs>;
3146			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
3147			#clock-cells = <1>;
3148			#reset-cells = <1>;
3149			#power-domain-cells = <1>;
3150		};
3151
3152		mdss: mdss@ae00000 {
3153			compatible = "qcom,sm8250-mdss";
3154			reg = <0 0x0ae00000 0 0x1000>;
3155			reg-names = "mdss";
3156
3157			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
3158					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
3159			interconnect-names = "mdp0-mem", "mdp1-mem";
3160
3161			power-domains = <&dispcc MDSS_GDSC>;
3162
3163			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3164				 <&gcc GCC_DISP_HF_AXI_CLK>,
3165				 <&gcc GCC_DISP_SF_AXI_CLK>,
3166				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
3167			clock-names = "iface", "bus", "nrt_bus", "core";
3168
3169			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
3170			assigned-clock-rates = <460000000>;
3171
3172			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
3173			interrupt-controller;
3174			#interrupt-cells = <1>;
3175
3176			iommus = <&apps_smmu 0x820 0x402>;
3177
3178			status = "disabled";
3179
3180			#address-cells = <2>;
3181			#size-cells = <2>;
3182			ranges;
3183
3184			mdss_mdp: mdp@ae01000 {
3185				compatible = "qcom,sm8250-dpu";
3186				reg = <0 0x0ae01000 0 0x8f000>,
3187				      <0 0x0aeb0000 0 0x2008>;
3188				reg-names = "mdp", "vbif";
3189
3190				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3191					 <&gcc GCC_DISP_HF_AXI_CLK>,
3192					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
3193					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3194				clock-names = "iface", "bus", "core", "vsync";
3195
3196				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
3197						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3198				assigned-clock-rates = <460000000>,
3199						       <19200000>;
3200
3201				operating-points-v2 = <&mdp_opp_table>;
3202				power-domains = <&rpmhpd SM8250_MMCX>;
3203
3204				interrupt-parent = <&mdss>;
3205				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
3206
3207				ports {
3208					#address-cells = <1>;
3209					#size-cells = <0>;
3210
3211					port@0 {
3212						reg = <0>;
3213						dpu_intf1_out: endpoint {
3214							remote-endpoint = <&dsi0_in>;
3215						};
3216					};
3217
3218					port@1 {
3219						reg = <1>;
3220						dpu_intf2_out: endpoint {
3221							remote-endpoint = <&dsi1_in>;
3222						};
3223					};
3224				};
3225
3226				mdp_opp_table: mdp-opp-table {
3227					compatible = "operating-points-v2";
3228
3229					opp-200000000 {
3230						opp-hz = /bits/ 64 <200000000>;
3231						required-opps = <&rpmhpd_opp_low_svs>;
3232					};
3233
3234					opp-300000000 {
3235						opp-hz = /bits/ 64 <300000000>;
3236						required-opps = <&rpmhpd_opp_svs>;
3237					};
3238
3239					opp-345000000 {
3240						opp-hz = /bits/ 64 <345000000>;
3241						required-opps = <&rpmhpd_opp_svs_l1>;
3242					};
3243
3244					opp-460000000 {
3245						opp-hz = /bits/ 64 <460000000>;
3246						required-opps = <&rpmhpd_opp_nom>;
3247					};
3248				};
3249			};
3250
3251			dsi0: dsi@ae94000 {
3252				compatible = "qcom,mdss-dsi-ctrl";
3253				reg = <0 0x0ae94000 0 0x400>;
3254				reg-names = "dsi_ctrl";
3255
3256				interrupt-parent = <&mdss>;
3257				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
3258
3259				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3260					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3261					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3262					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3263					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3264					<&gcc GCC_DISP_HF_AXI_CLK>;
3265				clock-names = "byte",
3266					      "byte_intf",
3267					      "pixel",
3268					      "core",
3269					      "iface",
3270					      "bus";
3271
3272				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3273				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
3274
3275				operating-points-v2 = <&dsi_opp_table>;
3276				power-domains = <&rpmhpd SM8250_MMCX>;
3277
3278				phys = <&dsi0_phy>;
3279				phy-names = "dsi";
3280
3281				status = "disabled";
3282
3283				#address-cells = <1>;
3284				#size-cells = <0>;
3285
3286				ports {
3287					#address-cells = <1>;
3288					#size-cells = <0>;
3289
3290					port@0 {
3291						reg = <0>;
3292						dsi0_in: endpoint {
3293							remote-endpoint = <&dpu_intf1_out>;
3294						};
3295					};
3296
3297					port@1 {
3298						reg = <1>;
3299						dsi0_out: endpoint {
3300						};
3301					};
3302				};
3303			};
3304
3305			dsi0_phy: dsi-phy@ae94400 {
3306				compatible = "qcom,dsi-phy-7nm";
3307				reg = <0 0x0ae94400 0 0x200>,
3308				      <0 0x0ae94600 0 0x280>,
3309				      <0 0x0ae94900 0 0x260>;
3310				reg-names = "dsi_phy",
3311					    "dsi_phy_lane",
3312					    "dsi_pll";
3313
3314				#clock-cells = <1>;
3315				#phy-cells = <0>;
3316
3317				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3318					 <&rpmhcc RPMH_CXO_CLK>;
3319				clock-names = "iface", "ref";
3320
3321				status = "disabled";
3322			};
3323
3324			dsi1: dsi@ae96000 {
3325				compatible = "qcom,mdss-dsi-ctrl";
3326				reg = <0 0x0ae96000 0 0x400>;
3327				reg-names = "dsi_ctrl";
3328
3329				interrupt-parent = <&mdss>;
3330				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
3331
3332				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
3333					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
3334					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
3335					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
3336					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3337					 <&gcc GCC_DISP_HF_AXI_CLK>;
3338				clock-names = "byte",
3339					      "byte_intf",
3340					      "pixel",
3341					      "core",
3342					      "iface",
3343					      "bus";
3344
3345				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
3346				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
3347
3348				operating-points-v2 = <&dsi_opp_table>;
3349				power-domains = <&rpmhpd SM8250_MMCX>;
3350
3351				phys = <&dsi1_phy>;
3352				phy-names = "dsi";
3353
3354				status = "disabled";
3355
3356				#address-cells = <1>;
3357				#size-cells = <0>;
3358
3359				ports {
3360					#address-cells = <1>;
3361					#size-cells = <0>;
3362
3363					port@0 {
3364						reg = <0>;
3365						dsi1_in: endpoint {
3366							remote-endpoint = <&dpu_intf2_out>;
3367						};
3368					};
3369
3370					port@1 {
3371						reg = <1>;
3372						dsi1_out: endpoint {
3373						};
3374					};
3375				};
3376			};
3377
3378			dsi1_phy: dsi-phy@ae96400 {
3379				compatible = "qcom,dsi-phy-7nm";
3380				reg = <0 0x0ae96400 0 0x200>,
3381				      <0 0x0ae96600 0 0x280>,
3382				      <0 0x0ae96900 0 0x260>;
3383				reg-names = "dsi_phy",
3384					    "dsi_phy_lane",
3385					    "dsi_pll";
3386
3387				#clock-cells = <1>;
3388				#phy-cells = <0>;
3389
3390				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3391					 <&rpmhcc RPMH_CXO_CLK>;
3392				clock-names = "iface", "ref";
3393
3394				status = "disabled";
3395
3396				dsi_opp_table: dsi-opp-table {
3397					compatible = "operating-points-v2";
3398
3399					opp-187500000 {
3400						opp-hz = /bits/ 64 <187500000>;
3401						required-opps = <&rpmhpd_opp_low_svs>;
3402					};
3403
3404					opp-300000000 {
3405						opp-hz = /bits/ 64 <300000000>;
3406						required-opps = <&rpmhpd_opp_svs>;
3407					};
3408
3409					opp-358000000 {
3410						opp-hz = /bits/ 64 <358000000>;
3411						required-opps = <&rpmhpd_opp_svs_l1>;
3412					};
3413				};
3414			};
3415		};
3416
3417		dispcc: clock-controller@af00000 {
3418			compatible = "qcom,sm8250-dispcc";
3419			reg = <0 0x0af00000 0 0x10000>;
3420			power-domains = <&rpmhpd SM8250_MMCX>;
3421			required-opps = <&rpmhpd_opp_low_svs>;
3422			clocks = <&rpmhcc RPMH_CXO_CLK>,
3423				 <&dsi0_phy 0>,
3424				 <&dsi0_phy 1>,
3425				 <&dsi1_phy 0>,
3426				 <&dsi1_phy 1>,
3427				 <&dp_phy 0>,
3428				 <&dp_phy 1>;
3429			clock-names = "bi_tcxo",
3430				      "dsi0_phy_pll_out_byteclk",
3431				      "dsi0_phy_pll_out_dsiclk",
3432				      "dsi1_phy_pll_out_byteclk",
3433				      "dsi1_phy_pll_out_dsiclk",
3434				      "dp_phy_pll_link_clk",
3435				      "dp_phy_pll_vco_div_clk";
3436			#clock-cells = <1>;
3437			#reset-cells = <1>;
3438			#power-domain-cells = <1>;
3439		};
3440
3441		pdc: interrupt-controller@b220000 {
3442			compatible = "qcom,sm8250-pdc", "qcom,pdc";
3443			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
3444			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
3445					  <125 63 1>, <126 716 12>;
3446			#interrupt-cells = <2>;
3447			interrupt-parent = <&intc>;
3448			interrupt-controller;
3449		};
3450
3451		tsens0: thermal-sensor@c263000 {
3452			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
3453			reg = <0 0x0c263000 0 0x1ff>, /* TM */
3454			      <0 0x0c222000 0 0x1ff>; /* SROT */
3455			#qcom,sensors = <16>;
3456			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3457				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3458			interrupt-names = "uplow", "critical";
3459			#thermal-sensor-cells = <1>;
3460		};
3461
3462		tsens1: thermal-sensor@c265000 {
3463			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
3464			reg = <0 0x0c265000 0 0x1ff>, /* TM */
3465			      <0 0x0c223000 0 0x1ff>; /* SROT */
3466			#qcom,sensors = <9>;
3467			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3468				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3469			interrupt-names = "uplow", "critical";
3470			#thermal-sensor-cells = <1>;
3471		};
3472
3473		aoss_qmp: power-controller@c300000 {
3474			compatible = "qcom,sm8250-aoss-qmp";
3475			reg = <0 0x0c300000 0 0x400>;
3476			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
3477						     IPCC_MPROC_SIGNAL_GLINK_QMP
3478						     IRQ_TYPE_EDGE_RISING>;
3479			mboxes = <&ipcc IPCC_CLIENT_AOP
3480					IPCC_MPROC_SIGNAL_GLINK_QMP>;
3481
3482			#clock-cells = <0>;
3483		};
3484
3485		sram@c3f0000 {
3486			compatible = "qcom,rpmh-stats";
3487			reg = <0 0x0c3f0000 0 0x400>;
3488		};
3489
3490		spmi_bus: spmi@c440000 {
3491			compatible = "qcom,spmi-pmic-arb";
3492			reg = <0x0 0x0c440000 0x0 0x0001100>,
3493			      <0x0 0x0c600000 0x0 0x2000000>,
3494			      <0x0 0x0e600000 0x0 0x0100000>,
3495			      <0x0 0x0e700000 0x0 0x00a0000>,
3496			      <0x0 0x0c40a000 0x0 0x0026000>;
3497			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3498			interrupt-names = "periph_irq";
3499			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3500			qcom,ee = <0>;
3501			qcom,channel = <0>;
3502			#address-cells = <2>;
3503			#size-cells = <0>;
3504			interrupt-controller;
3505			#interrupt-cells = <4>;
3506		};
3507
3508		tlmm: pinctrl@f100000 {
3509			compatible = "qcom,sm8250-pinctrl";
3510			reg = <0 0x0f100000 0 0x300000>,
3511			      <0 0x0f500000 0 0x300000>,
3512			      <0 0x0f900000 0 0x300000>;
3513			reg-names = "west", "south", "north";
3514			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3515			gpio-controller;
3516			#gpio-cells = <2>;
3517			interrupt-controller;
3518			#interrupt-cells = <2>;
3519			gpio-ranges = <&tlmm 0 0 181>;
3520			wakeup-parent = <&pdc>;
3521
3522			pri_mi2s_active: pri-mi2s-active {
3523				sclk {
3524					pins = "gpio138";
3525					function = "mi2s0_sck";
3526					drive-strength = <8>;
3527					bias-disable;
3528				};
3529
3530				ws {
3531					pins = "gpio141";
3532					function = "mi2s0_ws";
3533					drive-strength = <8>;
3534					output-high;
3535				};
3536
3537				data0 {
3538					pins = "gpio139";
3539					function = "mi2s0_data0";
3540					drive-strength = <8>;
3541					bias-disable;
3542					output-high;
3543				};
3544
3545				data1 {
3546					pins = "gpio140";
3547					function = "mi2s0_data1";
3548					drive-strength = <8>;
3549					output-high;
3550				};
3551			};
3552
3553			qup_i2c0_default: qup-i2c0-default {
3554				mux {
3555					pins = "gpio28", "gpio29";
3556					function = "qup0";
3557				};
3558
3559				config {
3560					pins = "gpio28", "gpio29";
3561					drive-strength = <2>;
3562					bias-disable;
3563				};
3564			};
3565
3566			qup_i2c1_default: qup-i2c1-default {
3567				pinmux {
3568					pins = "gpio4", "gpio5";
3569					function = "qup1";
3570				};
3571
3572				config {
3573					pins = "gpio4", "gpio5";
3574					drive-strength = <2>;
3575					bias-disable;
3576				};
3577			};
3578
3579			qup_i2c2_default: qup-i2c2-default {
3580				mux {
3581					pins = "gpio115", "gpio116";
3582					function = "qup2";
3583				};
3584
3585				config {
3586					pins = "gpio115", "gpio116";
3587					drive-strength = <2>;
3588					bias-disable;
3589				};
3590			};
3591
3592			qup_i2c3_default: qup-i2c3-default {
3593				mux {
3594					pins = "gpio119", "gpio120";
3595					function = "qup3";
3596				};
3597
3598				config {
3599					pins = "gpio119", "gpio120";
3600					drive-strength = <2>;
3601					bias-disable;
3602				};
3603			};
3604
3605			qup_i2c4_default: qup-i2c4-default {
3606				mux {
3607					pins = "gpio8", "gpio9";
3608					function = "qup4";
3609				};
3610
3611				config {
3612					pins = "gpio8", "gpio9";
3613					drive-strength = <2>;
3614					bias-disable;
3615				};
3616			};
3617
3618			qup_i2c5_default: qup-i2c5-default {
3619				mux {
3620					pins = "gpio12", "gpio13";
3621					function = "qup5";
3622				};
3623
3624				config {
3625					pins = "gpio12", "gpio13";
3626					drive-strength = <2>;
3627					bias-disable;
3628				};
3629			};
3630
3631			qup_i2c6_default: qup-i2c6-default {
3632				mux {
3633					pins = "gpio16", "gpio17";
3634					function = "qup6";
3635				};
3636
3637				config {
3638					pins = "gpio16", "gpio17";
3639					drive-strength = <2>;
3640					bias-disable;
3641				};
3642			};
3643
3644			qup_i2c7_default: qup-i2c7-default {
3645				mux {
3646					pins = "gpio20", "gpio21";
3647					function = "qup7";
3648				};
3649
3650				config {
3651					pins = "gpio20", "gpio21";
3652					drive-strength = <2>;
3653					bias-disable;
3654				};
3655			};
3656
3657			qup_i2c8_default: qup-i2c8-default {
3658				mux {
3659					pins = "gpio24", "gpio25";
3660					function = "qup8";
3661				};
3662
3663				config {
3664					pins = "gpio24", "gpio25";
3665					drive-strength = <2>;
3666					bias-disable;
3667				};
3668			};
3669
3670			qup_i2c9_default: qup-i2c9-default {
3671				mux {
3672					pins = "gpio125", "gpio126";
3673					function = "qup9";
3674				};
3675
3676				config {
3677					pins = "gpio125", "gpio126";
3678					drive-strength = <2>;
3679					bias-disable;
3680				};
3681			};
3682
3683			qup_i2c10_default: qup-i2c10-default {
3684				mux {
3685					pins = "gpio129", "gpio130";
3686					function = "qup10";
3687				};
3688
3689				config {
3690					pins = "gpio129", "gpio130";
3691					drive-strength = <2>;
3692					bias-disable;
3693				};
3694			};
3695
3696			qup_i2c11_default: qup-i2c11-default {
3697				mux {
3698					pins = "gpio60", "gpio61";
3699					function = "qup11";
3700				};
3701
3702				config {
3703					pins = "gpio60", "gpio61";
3704					drive-strength = <2>;
3705					bias-disable;
3706				};
3707			};
3708
3709			qup_i2c12_default: qup-i2c12-default {
3710				mux {
3711					pins = "gpio32", "gpio33";
3712					function = "qup12";
3713				};
3714
3715				config {
3716					pins = "gpio32", "gpio33";
3717					drive-strength = <2>;
3718					bias-disable;
3719				};
3720			};
3721
3722			qup_i2c13_default: qup-i2c13-default {
3723				mux {
3724					pins = "gpio36", "gpio37";
3725					function = "qup13";
3726				};
3727
3728				config {
3729					pins = "gpio36", "gpio37";
3730					drive-strength = <2>;
3731					bias-disable;
3732				};
3733			};
3734
3735			qup_i2c14_default: qup-i2c14-default {
3736				mux {
3737					pins = "gpio40", "gpio41";
3738					function = "qup14";
3739				};
3740
3741				config {
3742					pins = "gpio40", "gpio41";
3743					drive-strength = <2>;
3744					bias-disable;
3745				};
3746			};
3747
3748			qup_i2c15_default: qup-i2c15-default {
3749				mux {
3750					pins = "gpio44", "gpio45";
3751					function = "qup15";
3752				};
3753
3754				config {
3755					pins = "gpio44", "gpio45";
3756					drive-strength = <2>;
3757					bias-disable;
3758				};
3759			};
3760
3761			qup_i2c16_default: qup-i2c16-default {
3762				mux {
3763					pins = "gpio48", "gpio49";
3764					function = "qup16";
3765				};
3766
3767				config {
3768					pins = "gpio48", "gpio49";
3769					drive-strength = <2>;
3770					bias-disable;
3771				};
3772			};
3773
3774			qup_i2c17_default: qup-i2c17-default {
3775				mux {
3776					pins = "gpio52", "gpio53";
3777					function = "qup17";
3778				};
3779
3780				config {
3781					pins = "gpio52", "gpio53";
3782					drive-strength = <2>;
3783					bias-disable;
3784				};
3785			};
3786
3787			qup_i2c18_default: qup-i2c18-default {
3788				mux {
3789					pins = "gpio56", "gpio57";
3790					function = "qup18";
3791				};
3792
3793				config {
3794					pins = "gpio56", "gpio57";
3795					drive-strength = <2>;
3796					bias-disable;
3797				};
3798			};
3799
3800			qup_i2c19_default: qup-i2c19-default {
3801				mux {
3802					pins = "gpio0", "gpio1";
3803					function = "qup19";
3804				};
3805
3806				config {
3807					pins = "gpio0", "gpio1";
3808					drive-strength = <2>;
3809					bias-disable;
3810				};
3811			};
3812
3813			qup_spi0_cs: qup-spi0-cs {
3814				pins = "gpio31";
3815				function = "qup0";
3816			};
3817
3818			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
3819				pins = "gpio31";
3820				function = "gpio";
3821			};
3822
3823			qup_spi0_data_clk: qup-spi0-data-clk {
3824				pins = "gpio28", "gpio29",
3825				       "gpio30";
3826				function = "qup0";
3827			};
3828
3829			qup_spi1_cs: qup-spi1-cs {
3830				pins = "gpio7";
3831				function = "qup1";
3832			};
3833
3834			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
3835				pins = "gpio7";
3836				function = "gpio";
3837			};
3838
3839			qup_spi1_data_clk: qup-spi1-data-clk {
3840				pins = "gpio4", "gpio5",
3841				       "gpio6";
3842				function = "qup1";
3843			};
3844
3845			qup_spi2_cs: qup-spi2-cs {
3846				pins = "gpio118";
3847				function = "qup2";
3848			};
3849
3850			qup_spi2_cs_gpio: qup-spi2-cs-gpio {
3851				pins = "gpio118";
3852				function = "gpio";
3853			};
3854
3855			qup_spi2_data_clk: qup-spi2-data-clk {
3856				pins = "gpio115", "gpio116",
3857				       "gpio117";
3858				function = "qup2";
3859			};
3860
3861			qup_spi3_cs: qup-spi3-cs {
3862				pins = "gpio122";
3863				function = "qup3";
3864			};
3865
3866			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
3867				pins = "gpio122";
3868				function = "gpio";
3869			};
3870
3871			qup_spi3_data_clk: qup-spi3-data-clk {
3872				pins = "gpio119", "gpio120",
3873				       "gpio121";
3874				function = "qup3";
3875			};
3876
3877			qup_spi4_cs: qup-spi4-cs {
3878				pins = "gpio11";
3879				function = "qup4";
3880			};
3881
3882			qup_spi4_cs_gpio: qup-spi4-cs-gpio {
3883				pins = "gpio11";
3884				function = "gpio";
3885			};
3886
3887			qup_spi4_data_clk: qup-spi4-data-clk {
3888				pins = "gpio8", "gpio9",
3889				       "gpio10";
3890				function = "qup4";
3891			};
3892
3893			qup_spi5_cs: qup-spi5-cs {
3894				pins = "gpio15";
3895				function = "qup5";
3896			};
3897
3898			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
3899				pins = "gpio15";
3900				function = "gpio";
3901			};
3902
3903			qup_spi5_data_clk: qup-spi5-data-clk {
3904				pins = "gpio12", "gpio13",
3905				       "gpio14";
3906				function = "qup5";
3907			};
3908
3909			qup_spi6_cs: qup-spi6-cs {
3910				pins = "gpio19";
3911				function = "qup6";
3912			};
3913
3914			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
3915				pins = "gpio19";
3916				function = "gpio";
3917			};
3918
3919			qup_spi6_data_clk: qup-spi6-data-clk {
3920				pins = "gpio16", "gpio17",
3921				       "gpio18";
3922				function = "qup6";
3923			};
3924
3925			qup_spi7_cs: qup-spi7-cs {
3926				pins = "gpio23";
3927				function = "qup7";
3928			};
3929
3930			qup_spi7_cs_gpio: qup-spi7-cs-gpio {
3931				pins = "gpio23";
3932				function = "gpio";
3933			};
3934
3935			qup_spi7_data_clk: qup-spi7-data-clk {
3936				pins = "gpio20", "gpio21",
3937				       "gpio22";
3938				function = "qup7";
3939			};
3940
3941			qup_spi8_cs: qup-spi8-cs {
3942				pins = "gpio27";
3943				function = "qup8";
3944			};
3945
3946			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
3947				pins = "gpio27";
3948				function = "gpio";
3949			};
3950
3951			qup_spi8_data_clk: qup-spi8-data-clk {
3952				pins = "gpio24", "gpio25",
3953				       "gpio26";
3954				function = "qup8";
3955			};
3956
3957			qup_spi9_cs: qup-spi9-cs {
3958				pins = "gpio128";
3959				function = "qup9";
3960			};
3961
3962			qup_spi9_cs_gpio: qup-spi9-cs-gpio {
3963				pins = "gpio128";
3964				function = "gpio";
3965			};
3966
3967			qup_spi9_data_clk: qup-spi9-data-clk {
3968				pins = "gpio125", "gpio126",
3969				       "gpio127";
3970				function = "qup9";
3971			};
3972
3973			qup_spi10_cs: qup-spi10-cs {
3974				pins = "gpio132";
3975				function = "qup10";
3976			};
3977
3978			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
3979				pins = "gpio132";
3980				function = "gpio";
3981			};
3982
3983			qup_spi10_data_clk: qup-spi10-data-clk {
3984				pins = "gpio129", "gpio130",
3985				       "gpio131";
3986				function = "qup10";
3987			};
3988
3989			qup_spi11_cs: qup-spi11-cs {
3990				pins = "gpio63";
3991				function = "qup11";
3992			};
3993
3994			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
3995				pins = "gpio63";
3996				function = "gpio";
3997			};
3998
3999			qup_spi11_data_clk: qup-spi11-data-clk {
4000				pins = "gpio60", "gpio61",
4001				       "gpio62";
4002				function = "qup11";
4003			};
4004
4005			qup_spi12_cs: qup-spi12-cs {
4006				pins = "gpio35";
4007				function = "qup12";
4008			};
4009
4010			qup_spi12_cs_gpio: qup-spi12-cs-gpio {
4011				pins = "gpio35";
4012				function = "gpio";
4013			};
4014
4015			qup_spi12_data_clk: qup-spi12-data-clk {
4016				pins = "gpio32", "gpio33",
4017				       "gpio34";
4018				function = "qup12";
4019			};
4020
4021			qup_spi13_cs: qup-spi13-cs {
4022				pins = "gpio39";
4023				function = "qup13";
4024			};
4025
4026			qup_spi13_cs_gpio: qup-spi13-cs-gpio {
4027				pins = "gpio39";
4028				function = "gpio";
4029			};
4030
4031			qup_spi13_data_clk: qup-spi13-data-clk {
4032				pins = "gpio36", "gpio37",
4033				       "gpio38";
4034				function = "qup13";
4035			};
4036
4037			qup_spi14_cs: qup-spi14-cs {
4038				pins = "gpio43";
4039				function = "qup14";
4040			};
4041
4042			qup_spi14_cs_gpio: qup-spi14-cs-gpio {
4043				pins = "gpio43";
4044				function = "gpio";
4045			};
4046
4047			qup_spi14_data_clk: qup-spi14-data-clk {
4048				pins = "gpio40", "gpio41",
4049				       "gpio42";
4050				function = "qup14";
4051			};
4052
4053			qup_spi15_cs: qup-spi15-cs {
4054				pins = "gpio47";
4055				function = "qup15";
4056			};
4057
4058			qup_spi15_cs_gpio: qup-spi15-cs-gpio {
4059				pins = "gpio47";
4060				function = "gpio";
4061			};
4062
4063			qup_spi15_data_clk: qup-spi15-data-clk {
4064				pins = "gpio44", "gpio45",
4065				       "gpio46";
4066				function = "qup15";
4067			};
4068
4069			qup_spi16_cs: qup-spi16-cs {
4070				pins = "gpio51";
4071				function = "qup16";
4072			};
4073
4074			qup_spi16_cs_gpio: qup-spi16-cs-gpio {
4075				pins = "gpio51";
4076				function = "gpio";
4077			};
4078
4079			qup_spi16_data_clk: qup-spi16-data-clk {
4080				pins = "gpio48", "gpio49",
4081				       "gpio50";
4082				function = "qup16";
4083			};
4084
4085			qup_spi17_cs: qup-spi17-cs {
4086				pins = "gpio55";
4087				function = "qup17";
4088			};
4089
4090			qup_spi17_cs_gpio: qup-spi17-cs-gpio {
4091				pins = "gpio55";
4092				function = "gpio";
4093			};
4094
4095			qup_spi17_data_clk: qup-spi17-data-clk {
4096				pins = "gpio52", "gpio53",
4097				       "gpio54";
4098				function = "qup17";
4099			};
4100
4101			qup_spi18_cs: qup-spi18-cs {
4102				pins = "gpio59";
4103				function = "qup18";
4104			};
4105
4106			qup_spi18_cs_gpio: qup-spi18-cs-gpio {
4107				pins = "gpio59";
4108				function = "gpio";
4109			};
4110
4111			qup_spi18_data_clk: qup-spi18-data-clk {
4112				pins = "gpio56", "gpio57",
4113				       "gpio58";
4114				function = "qup18";
4115			};
4116
4117			qup_spi19_cs: qup-spi19-cs {
4118				pins = "gpio3";
4119				function = "qup19";
4120			};
4121
4122			qup_spi19_cs_gpio: qup-spi19-cs-gpio {
4123				pins = "gpio3";
4124				function = "gpio";
4125			};
4126
4127			qup_spi19_data_clk: qup-spi19-data-clk {
4128				pins = "gpio0", "gpio1",
4129				       "gpio2";
4130				function = "qup19";
4131			};
4132
4133			qup_uart2_default: qup-uart2-default {
4134				mux {
4135					pins = "gpio117", "gpio118";
4136					function = "qup2";
4137				};
4138			};
4139
4140			qup_uart6_default: qup-uart6-default {
4141				mux {
4142					pins = "gpio16", "gpio17",
4143						"gpio18", "gpio19";
4144					function = "qup6";
4145				};
4146			};
4147
4148			qup_uart12_default: qup-uart12-default {
4149				mux {
4150					pins = "gpio34", "gpio35";
4151					function = "qup12";
4152				};
4153			};
4154
4155			qup_uart17_default: qup-uart17-default {
4156				mux {
4157					pins = "gpio52", "gpio53",
4158						"gpio54", "gpio55";
4159					function = "qup17";
4160				};
4161			};
4162
4163			qup_uart18_default: qup-uart18-default {
4164				mux {
4165					pins = "gpio58", "gpio59";
4166					function = "qup18";
4167				};
4168			};
4169
4170			tert_mi2s_active: tert-mi2s-active {
4171				sck {
4172					pins = "gpio133";
4173					function = "mi2s2_sck";
4174					drive-strength = <8>;
4175					bias-disable;
4176				};
4177
4178				data0 {
4179					pins = "gpio134";
4180					function = "mi2s2_data0";
4181					drive-strength = <8>;
4182					bias-disable;
4183					output-high;
4184				};
4185
4186				ws {
4187					pins = "gpio135";
4188					function = "mi2s2_ws";
4189					drive-strength = <8>;
4190					output-high;
4191				};
4192			};
4193
4194			sdc2_sleep_state: sdc2-sleep {
4195				clk {
4196					pins = "sdc2_clk";
4197					drive-strength = <2>;
4198					bias-disable;
4199				};
4200
4201				cmd {
4202					pins = "sdc2_cmd";
4203					drive-strength = <2>;
4204					bias-pull-up;
4205				};
4206
4207				data {
4208					pins = "sdc2_data";
4209					drive-strength = <2>;
4210					bias-pull-up;
4211				};
4212			};
4213
4214			pcie0_default_state: pcie0-default {
4215				perst {
4216					pins = "gpio79";
4217					function = "gpio";
4218					drive-strength = <2>;
4219					bias-pull-down;
4220				};
4221
4222				clkreq {
4223					pins = "gpio80";
4224					function = "pci_e0";
4225					drive-strength = <2>;
4226					bias-pull-up;
4227				};
4228
4229				wake {
4230					pins = "gpio81";
4231					function = "gpio";
4232					drive-strength = <2>;
4233					bias-pull-up;
4234				};
4235			};
4236
4237			pcie1_default_state: pcie1-default {
4238				perst {
4239					pins = "gpio82";
4240					function = "gpio";
4241					drive-strength = <2>;
4242					bias-pull-down;
4243				};
4244
4245				clkreq {
4246					pins = "gpio83";
4247					function = "pci_e1";
4248					drive-strength = <2>;
4249					bias-pull-up;
4250				};
4251
4252				wake {
4253					pins = "gpio84";
4254					function = "gpio";
4255					drive-strength = <2>;
4256					bias-pull-up;
4257				};
4258			};
4259
4260			pcie2_default_state: pcie2-default {
4261				perst {
4262					pins = "gpio85";
4263					function = "gpio";
4264					drive-strength = <2>;
4265					bias-pull-down;
4266				};
4267
4268				clkreq {
4269					pins = "gpio86";
4270					function = "pci_e2";
4271					drive-strength = <2>;
4272					bias-pull-up;
4273				};
4274
4275				wake {
4276					pins = "gpio87";
4277					function = "gpio";
4278					drive-strength = <2>;
4279					bias-pull-up;
4280				};
4281			};
4282		};
4283
4284		apps_smmu: iommu@15000000 {
4285			compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
4286			reg = <0 0x15000000 0 0x100000>;
4287			#iommu-cells = <2>;
4288			#global-interrupts = <2>;
4289			interrupts =    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
4290					<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
4291					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
4292					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
4293					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
4294					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
4295					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
4296					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
4297					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
4298					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
4299					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
4300					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
4301					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
4302					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
4303					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
4304					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
4305					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
4306					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
4307					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
4308					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
4309					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
4310					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
4311					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
4312					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
4313					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
4314					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
4315					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
4316					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
4317					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
4318					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
4319					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
4320					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
4321					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
4322					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
4323					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
4324					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
4325					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
4326					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
4327					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
4328					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
4329					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
4330					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
4331					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
4332					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
4333					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
4334					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
4335					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
4336					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
4337					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
4338					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
4339					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
4340					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
4341					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
4342					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
4343					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
4344					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
4345					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
4346					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
4347					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
4348					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
4349					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
4350					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
4351					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
4352					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
4353					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
4354					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
4355					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
4356					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
4357					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
4358					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
4359					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
4360					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
4361					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
4362					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
4363					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
4364					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
4365					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
4366					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
4367					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
4368					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
4369					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
4370					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
4371					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
4372					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
4373					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
4374					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
4375					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
4376					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
4377					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
4378					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
4379					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
4380					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
4381					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
4382					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
4383					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
4384					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
4385					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
4386					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
4387		};
4388
4389		adsp: remoteproc@17300000 {
4390			compatible = "qcom,sm8250-adsp-pas";
4391			reg = <0 0x17300000 0 0x100>;
4392
4393			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
4394					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
4395					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
4396					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
4397					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
4398			interrupt-names = "wdog", "fatal", "ready",
4399					  "handover", "stop-ack";
4400
4401			clocks = <&rpmhcc RPMH_CXO_CLK>;
4402			clock-names = "xo";
4403
4404			power-domains = <&rpmhpd SM8250_LCX>,
4405					<&rpmhpd SM8250_LMX>;
4406			power-domain-names = "lcx", "lmx";
4407
4408			memory-region = <&adsp_mem>;
4409
4410			qcom,qmp = <&aoss_qmp>;
4411
4412			qcom,smem-states = <&smp2p_adsp_out 0>;
4413			qcom,smem-state-names = "stop";
4414
4415			status = "disabled";
4416
4417			glink-edge {
4418				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
4419							     IPCC_MPROC_SIGNAL_GLINK_QMP
4420							     IRQ_TYPE_EDGE_RISING>;
4421				mboxes = <&ipcc IPCC_CLIENT_LPASS
4422						IPCC_MPROC_SIGNAL_GLINK_QMP>;
4423
4424				label = "lpass";
4425				qcom,remote-pid = <2>;
4426
4427				apr {
4428					compatible = "qcom,apr-v2";
4429					qcom,glink-channels = "apr_audio_svc";
4430					qcom,domain = <APR_DOMAIN_ADSP>;
4431					#address-cells = <1>;
4432					#size-cells = <0>;
4433
4434					apr-service@3 {
4435						reg = <APR_SVC_ADSP_CORE>;
4436						compatible = "qcom,q6core";
4437						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4438					};
4439
4440					q6afe: apr-service@4 {
4441						compatible = "qcom,q6afe";
4442						reg = <APR_SVC_AFE>;
4443						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4444						q6afedai: dais {
4445							compatible = "qcom,q6afe-dais";
4446							#address-cells = <1>;
4447							#size-cells = <0>;
4448							#sound-dai-cells = <1>;
4449						};
4450
4451						q6afecc: cc {
4452							compatible = "qcom,q6afe-clocks";
4453							#clock-cells = <2>;
4454						};
4455					};
4456
4457					q6asm: apr-service@7 {
4458						compatible = "qcom,q6asm";
4459						reg = <APR_SVC_ASM>;
4460						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4461						q6asmdai: dais {
4462							compatible = "qcom,q6asm-dais";
4463							#address-cells = <1>;
4464							#size-cells = <0>;
4465							#sound-dai-cells = <1>;
4466							iommus = <&apps_smmu 0x1801 0x0>;
4467						};
4468					};
4469
4470					q6adm: apr-service@8 {
4471						compatible = "qcom,q6adm";
4472						reg = <APR_SVC_ADM>;
4473						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
4474						q6routing: routing {
4475							compatible = "qcom,q6adm-routing";
4476							#sound-dai-cells = <0>;
4477						};
4478					};
4479				};
4480
4481				fastrpc {
4482					compatible = "qcom,fastrpc";
4483					qcom,glink-channels = "fastrpcglink-apps-dsp";
4484					label = "adsp";
4485					qcom,non-secure-domain;
4486					#address-cells = <1>;
4487					#size-cells = <0>;
4488
4489					compute-cb@3 {
4490						compatible = "qcom,fastrpc-compute-cb";
4491						reg = <3>;
4492						iommus = <&apps_smmu 0x1803 0x0>;
4493					};
4494
4495					compute-cb@4 {
4496						compatible = "qcom,fastrpc-compute-cb";
4497						reg = <4>;
4498						iommus = <&apps_smmu 0x1804 0x0>;
4499					};
4500
4501					compute-cb@5 {
4502						compatible = "qcom,fastrpc-compute-cb";
4503						reg = <5>;
4504						iommus = <&apps_smmu 0x1805 0x0>;
4505					};
4506				};
4507			};
4508		};
4509
4510		intc: interrupt-controller@17a00000 {
4511			compatible = "arm,gic-v3";
4512			#interrupt-cells = <3>;
4513			interrupt-controller;
4514			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
4515			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
4516			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
4517		};
4518
4519		watchdog@17c10000 {
4520			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
4521			reg = <0 0x17c10000 0 0x1000>;
4522			clocks = <&sleep_clk>;
4523			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
4524		};
4525
4526		timer@17c20000 {
4527			#address-cells = <2>;
4528			#size-cells = <2>;
4529			ranges;
4530			compatible = "arm,armv7-timer-mem";
4531			reg = <0x0 0x17c20000 0x0 0x1000>;
4532			clock-frequency = <19200000>;
4533
4534			frame@17c21000 {
4535				frame-number = <0>;
4536				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
4537					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
4538				reg = <0x0 0x17c21000 0x0 0x1000>,
4539				      <0x0 0x17c22000 0x0 0x1000>;
4540			};
4541
4542			frame@17c23000 {
4543				frame-number = <1>;
4544				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
4545				reg = <0x0 0x17c23000 0x0 0x1000>;
4546				status = "disabled";
4547			};
4548
4549			frame@17c25000 {
4550				frame-number = <2>;
4551				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
4552				reg = <0x0 0x17c25000 0x0 0x1000>;
4553				status = "disabled";
4554			};
4555
4556			frame@17c27000 {
4557				frame-number = <3>;
4558				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
4559				reg = <0x0 0x17c27000 0x0 0x1000>;
4560				status = "disabled";
4561			};
4562
4563			frame@17c29000 {
4564				frame-number = <4>;
4565				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
4566				reg = <0x0 0x17c29000 0x0 0x1000>;
4567				status = "disabled";
4568			};
4569
4570			frame@17c2b000 {
4571				frame-number = <5>;
4572				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
4573				reg = <0x0 0x17c2b000 0x0 0x1000>;
4574				status = "disabled";
4575			};
4576
4577			frame@17c2d000 {
4578				frame-number = <6>;
4579				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
4580				reg = <0x0 0x17c2d000 0x0 0x1000>;
4581				status = "disabled";
4582			};
4583		};
4584
4585		apps_rsc: rsc@18200000 {
4586			label = "apps_rsc";
4587			compatible = "qcom,rpmh-rsc";
4588			reg = <0x0 0x18200000 0x0 0x10000>,
4589				<0x0 0x18210000 0x0 0x10000>,
4590				<0x0 0x18220000 0x0 0x10000>;
4591			reg-names = "drv-0", "drv-1", "drv-2";
4592			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
4593				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
4594				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
4595			qcom,tcs-offset = <0xd00>;
4596			qcom,drv-id = <2>;
4597			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
4598					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
4599
4600			rpmhcc: clock-controller {
4601				compatible = "qcom,sm8250-rpmh-clk";
4602				#clock-cells = <1>;
4603				clock-names = "xo";
4604				clocks = <&xo_board>;
4605			};
4606
4607			rpmhpd: power-controller {
4608				compatible = "qcom,sm8250-rpmhpd";
4609				#power-domain-cells = <1>;
4610				operating-points-v2 = <&rpmhpd_opp_table>;
4611
4612				rpmhpd_opp_table: opp-table {
4613					compatible = "operating-points-v2";
4614
4615					rpmhpd_opp_ret: opp1 {
4616						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
4617					};
4618
4619					rpmhpd_opp_min_svs: opp2 {
4620						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
4621					};
4622
4623					rpmhpd_opp_low_svs: opp3 {
4624						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
4625					};
4626
4627					rpmhpd_opp_svs: opp4 {
4628						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
4629					};
4630
4631					rpmhpd_opp_svs_l1: opp5 {
4632						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
4633					};
4634
4635					rpmhpd_opp_nom: opp6 {
4636						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
4637					};
4638
4639					rpmhpd_opp_nom_l1: opp7 {
4640						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
4641					};
4642
4643					rpmhpd_opp_nom_l2: opp8 {
4644						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
4645					};
4646
4647					rpmhpd_opp_turbo: opp9 {
4648						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
4649					};
4650
4651					rpmhpd_opp_turbo_l1: opp10 {
4652						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
4653					};
4654				};
4655			};
4656
4657			apps_bcm_voter: bcm_voter {
4658				compatible = "qcom,bcm-voter";
4659			};
4660		};
4661
4662		epss_l3: interconnect@18590000 {
4663			compatible = "qcom,sm8250-epss-l3";
4664			reg = <0 0x18590000 0 0x1000>;
4665
4666			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
4667			clock-names = "xo", "alternate";
4668
4669			#interconnect-cells = <1>;
4670		};
4671
4672		cpufreq_hw: cpufreq@18591000 {
4673			compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
4674			reg = <0 0x18591000 0 0x1000>,
4675			      <0 0x18592000 0 0x1000>,
4676			      <0 0x18593000 0 0x1000>;
4677			reg-names = "freq-domain0", "freq-domain1",
4678				    "freq-domain2";
4679
4680			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
4681			clock-names = "xo", "alternate";
4682			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
4683				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
4684				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
4685			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
4686			#freq-domain-cells = <1>;
4687		};
4688	};
4689
4690	timer {
4691		compatible = "arm,armv8-timer";
4692		interrupts = <GIC_PPI 13
4693				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4694			     <GIC_PPI 14
4695				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4696			     <GIC_PPI 11
4697				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
4698			     <GIC_PPI 10
4699				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
4700	};
4701
4702	thermal-zones {
4703		cpu0-thermal {
4704			polling-delay-passive = <250>;
4705			polling-delay = <1000>;
4706
4707			thermal-sensors = <&tsens0 1>;
4708
4709			trips {
4710				cpu0_alert0: trip-point0 {
4711					temperature = <90000>;
4712					hysteresis = <2000>;
4713					type = "passive";
4714				};
4715
4716				cpu0_alert1: trip-point1 {
4717					temperature = <95000>;
4718					hysteresis = <2000>;
4719					type = "passive";
4720				};
4721
4722				cpu0_crit: cpu_crit {
4723					temperature = <110000>;
4724					hysteresis = <1000>;
4725					type = "critical";
4726				};
4727			};
4728
4729			cooling-maps {
4730				map0 {
4731					trip = <&cpu0_alert0>;
4732					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4733							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4734							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4735							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4736				};
4737				map1 {
4738					trip = <&cpu0_alert1>;
4739					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4740							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4741							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4742							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4743				};
4744			};
4745		};
4746
4747		cpu1-thermal {
4748			polling-delay-passive = <250>;
4749			polling-delay = <1000>;
4750
4751			thermal-sensors = <&tsens0 2>;
4752
4753			trips {
4754				cpu1_alert0: trip-point0 {
4755					temperature = <90000>;
4756					hysteresis = <2000>;
4757					type = "passive";
4758				};
4759
4760				cpu1_alert1: trip-point1 {
4761					temperature = <95000>;
4762					hysteresis = <2000>;
4763					type = "passive";
4764				};
4765
4766				cpu1_crit: cpu_crit {
4767					temperature = <110000>;
4768					hysteresis = <1000>;
4769					type = "critical";
4770				};
4771			};
4772
4773			cooling-maps {
4774				map0 {
4775					trip = <&cpu1_alert0>;
4776					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4777							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4778							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4779							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4780				};
4781				map1 {
4782					trip = <&cpu1_alert1>;
4783					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4784							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4785							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4786							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4787				};
4788			};
4789		};
4790
4791		cpu2-thermal {
4792			polling-delay-passive = <250>;
4793			polling-delay = <1000>;
4794
4795			thermal-sensors = <&tsens0 3>;
4796
4797			trips {
4798				cpu2_alert0: trip-point0 {
4799					temperature = <90000>;
4800					hysteresis = <2000>;
4801					type = "passive";
4802				};
4803
4804				cpu2_alert1: trip-point1 {
4805					temperature = <95000>;
4806					hysteresis = <2000>;
4807					type = "passive";
4808				};
4809
4810				cpu2_crit: cpu_crit {
4811					temperature = <110000>;
4812					hysteresis = <1000>;
4813					type = "critical";
4814				};
4815			};
4816
4817			cooling-maps {
4818				map0 {
4819					trip = <&cpu2_alert0>;
4820					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4821							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4822							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4823							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4824				};
4825				map1 {
4826					trip = <&cpu2_alert1>;
4827					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4828							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4829							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4830							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4831				};
4832			};
4833		};
4834
4835		cpu3-thermal {
4836			polling-delay-passive = <250>;
4837			polling-delay = <1000>;
4838
4839			thermal-sensors = <&tsens0 4>;
4840
4841			trips {
4842				cpu3_alert0: trip-point0 {
4843					temperature = <90000>;
4844					hysteresis = <2000>;
4845					type = "passive";
4846				};
4847
4848				cpu3_alert1: trip-point1 {
4849					temperature = <95000>;
4850					hysteresis = <2000>;
4851					type = "passive";
4852				};
4853
4854				cpu3_crit: cpu_crit {
4855					temperature = <110000>;
4856					hysteresis = <1000>;
4857					type = "critical";
4858				};
4859			};
4860
4861			cooling-maps {
4862				map0 {
4863					trip = <&cpu3_alert0>;
4864					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4865							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4866							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4867							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4868				};
4869				map1 {
4870					trip = <&cpu3_alert1>;
4871					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4872							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4873							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4874							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4875				};
4876			};
4877		};
4878
4879		cpu4-top-thermal {
4880			polling-delay-passive = <250>;
4881			polling-delay = <1000>;
4882
4883			thermal-sensors = <&tsens0 7>;
4884
4885			trips {
4886				cpu4_top_alert0: trip-point0 {
4887					temperature = <90000>;
4888					hysteresis = <2000>;
4889					type = "passive";
4890				};
4891
4892				cpu4_top_alert1: trip-point1 {
4893					temperature = <95000>;
4894					hysteresis = <2000>;
4895					type = "passive";
4896				};
4897
4898				cpu4_top_crit: cpu_crit {
4899					temperature = <110000>;
4900					hysteresis = <1000>;
4901					type = "critical";
4902				};
4903			};
4904
4905			cooling-maps {
4906				map0 {
4907					trip = <&cpu4_top_alert0>;
4908					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4909							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4910							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4911							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4912				};
4913				map1 {
4914					trip = <&cpu4_top_alert1>;
4915					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4916							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4917							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4918							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4919				};
4920			};
4921		};
4922
4923		cpu5-top-thermal {
4924			polling-delay-passive = <250>;
4925			polling-delay = <1000>;
4926
4927			thermal-sensors = <&tsens0 8>;
4928
4929			trips {
4930				cpu5_top_alert0: trip-point0 {
4931					temperature = <90000>;
4932					hysteresis = <2000>;
4933					type = "passive";
4934				};
4935
4936				cpu5_top_alert1: trip-point1 {
4937					temperature = <95000>;
4938					hysteresis = <2000>;
4939					type = "passive";
4940				};
4941
4942				cpu5_top_crit: cpu_crit {
4943					temperature = <110000>;
4944					hysteresis = <1000>;
4945					type = "critical";
4946				};
4947			};
4948
4949			cooling-maps {
4950				map0 {
4951					trip = <&cpu5_top_alert0>;
4952					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4953							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4954							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4955							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4956				};
4957				map1 {
4958					trip = <&cpu5_top_alert1>;
4959					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4960							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4961							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4962							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4963				};
4964			};
4965		};
4966
4967		cpu6-top-thermal {
4968			polling-delay-passive = <250>;
4969			polling-delay = <1000>;
4970
4971			thermal-sensors = <&tsens0 9>;
4972
4973			trips {
4974				cpu6_top_alert0: trip-point0 {
4975					temperature = <90000>;
4976					hysteresis = <2000>;
4977					type = "passive";
4978				};
4979
4980				cpu6_top_alert1: trip-point1 {
4981					temperature = <95000>;
4982					hysteresis = <2000>;
4983					type = "passive";
4984				};
4985
4986				cpu6_top_crit: cpu_crit {
4987					temperature = <110000>;
4988					hysteresis = <1000>;
4989					type = "critical";
4990				};
4991			};
4992
4993			cooling-maps {
4994				map0 {
4995					trip = <&cpu6_top_alert0>;
4996					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4997							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4998							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4999							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5000				};
5001				map1 {
5002					trip = <&cpu6_top_alert1>;
5003					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5004							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5005							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5006							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5007				};
5008			};
5009		};
5010
5011		cpu7-top-thermal {
5012			polling-delay-passive = <250>;
5013			polling-delay = <1000>;
5014
5015			thermal-sensors = <&tsens0 10>;
5016
5017			trips {
5018				cpu7_top_alert0: trip-point0 {
5019					temperature = <90000>;
5020					hysteresis = <2000>;
5021					type = "passive";
5022				};
5023
5024				cpu7_top_alert1: trip-point1 {
5025					temperature = <95000>;
5026					hysteresis = <2000>;
5027					type = "passive";
5028				};
5029
5030				cpu7_top_crit: cpu_crit {
5031					temperature = <110000>;
5032					hysteresis = <1000>;
5033					type = "critical";
5034				};
5035			};
5036
5037			cooling-maps {
5038				map0 {
5039					trip = <&cpu7_top_alert0>;
5040					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5041							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5042							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5043							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5044				};
5045				map1 {
5046					trip = <&cpu7_top_alert1>;
5047					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5048							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5049							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5050							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5051				};
5052			};
5053		};
5054
5055		cpu4-bottom-thermal {
5056			polling-delay-passive = <250>;
5057			polling-delay = <1000>;
5058
5059			thermal-sensors = <&tsens0 11>;
5060
5061			trips {
5062				cpu4_bottom_alert0: trip-point0 {
5063					temperature = <90000>;
5064					hysteresis = <2000>;
5065					type = "passive";
5066				};
5067
5068				cpu4_bottom_alert1: trip-point1 {
5069					temperature = <95000>;
5070					hysteresis = <2000>;
5071					type = "passive";
5072				};
5073
5074				cpu4_bottom_crit: cpu_crit {
5075					temperature = <110000>;
5076					hysteresis = <1000>;
5077					type = "critical";
5078				};
5079			};
5080
5081			cooling-maps {
5082				map0 {
5083					trip = <&cpu4_bottom_alert0>;
5084					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5085							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5086							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5087							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5088				};
5089				map1 {
5090					trip = <&cpu4_bottom_alert1>;
5091					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5092							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5093							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5094							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5095				};
5096			};
5097		};
5098
5099		cpu5-bottom-thermal {
5100			polling-delay-passive = <250>;
5101			polling-delay = <1000>;
5102
5103			thermal-sensors = <&tsens0 12>;
5104
5105			trips {
5106				cpu5_bottom_alert0: trip-point0 {
5107					temperature = <90000>;
5108					hysteresis = <2000>;
5109					type = "passive";
5110				};
5111
5112				cpu5_bottom_alert1: trip-point1 {
5113					temperature = <95000>;
5114					hysteresis = <2000>;
5115					type = "passive";
5116				};
5117
5118				cpu5_bottom_crit: cpu_crit {
5119					temperature = <110000>;
5120					hysteresis = <1000>;
5121					type = "critical";
5122				};
5123			};
5124
5125			cooling-maps {
5126				map0 {
5127					trip = <&cpu5_bottom_alert0>;
5128					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5129							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5130							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5131							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5132				};
5133				map1 {
5134					trip = <&cpu5_bottom_alert1>;
5135					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5136							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5137							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5138							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5139				};
5140			};
5141		};
5142
5143		cpu6-bottom-thermal {
5144			polling-delay-passive = <250>;
5145			polling-delay = <1000>;
5146
5147			thermal-sensors = <&tsens0 13>;
5148
5149			trips {
5150				cpu6_bottom_alert0: trip-point0 {
5151					temperature = <90000>;
5152					hysteresis = <2000>;
5153					type = "passive";
5154				};
5155
5156				cpu6_bottom_alert1: trip-point1 {
5157					temperature = <95000>;
5158					hysteresis = <2000>;
5159					type = "passive";
5160				};
5161
5162				cpu6_bottom_crit: cpu_crit {
5163					temperature = <110000>;
5164					hysteresis = <1000>;
5165					type = "critical";
5166				};
5167			};
5168
5169			cooling-maps {
5170				map0 {
5171					trip = <&cpu6_bottom_alert0>;
5172					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5173							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5174							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5175							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5176				};
5177				map1 {
5178					trip = <&cpu6_bottom_alert1>;
5179					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5180							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5181							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5182							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5183				};
5184			};
5185		};
5186
5187		cpu7-bottom-thermal {
5188			polling-delay-passive = <250>;
5189			polling-delay = <1000>;
5190
5191			thermal-sensors = <&tsens0 14>;
5192
5193			trips {
5194				cpu7_bottom_alert0: trip-point0 {
5195					temperature = <90000>;
5196					hysteresis = <2000>;
5197					type = "passive";
5198				};
5199
5200				cpu7_bottom_alert1: trip-point1 {
5201					temperature = <95000>;
5202					hysteresis = <2000>;
5203					type = "passive";
5204				};
5205
5206				cpu7_bottom_crit: cpu_crit {
5207					temperature = <110000>;
5208					hysteresis = <1000>;
5209					type = "critical";
5210				};
5211			};
5212
5213			cooling-maps {
5214				map0 {
5215					trip = <&cpu7_bottom_alert0>;
5216					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5217							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5218							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5219							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5220				};
5221				map1 {
5222					trip = <&cpu7_bottom_alert1>;
5223					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5224							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5225							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
5226							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5227				};
5228			};
5229		};
5230
5231		aoss0-thermal {
5232			polling-delay-passive = <250>;
5233			polling-delay = <1000>;
5234
5235			thermal-sensors = <&tsens0 0>;
5236
5237			trips {
5238				aoss0_alert0: trip-point0 {
5239					temperature = <90000>;
5240					hysteresis = <2000>;
5241					type = "hot";
5242				};
5243			};
5244		};
5245
5246		cluster0-thermal {
5247			polling-delay-passive = <250>;
5248			polling-delay = <1000>;
5249
5250			thermal-sensors = <&tsens0 5>;
5251
5252			trips {
5253				cluster0_alert0: trip-point0 {
5254					temperature = <90000>;
5255					hysteresis = <2000>;
5256					type = "hot";
5257				};
5258				cluster0_crit: cluster0_crit {
5259					temperature = <110000>;
5260					hysteresis = <2000>;
5261					type = "critical";
5262				};
5263			};
5264		};
5265
5266		cluster1-thermal {
5267			polling-delay-passive = <250>;
5268			polling-delay = <1000>;
5269
5270			thermal-sensors = <&tsens0 6>;
5271
5272			trips {
5273				cluster1_alert0: trip-point0 {
5274					temperature = <90000>;
5275					hysteresis = <2000>;
5276					type = "hot";
5277				};
5278				cluster1_crit: cluster1_crit {
5279					temperature = <110000>;
5280					hysteresis = <2000>;
5281					type = "critical";
5282				};
5283			};
5284		};
5285
5286		gpu-top-thermal {
5287			polling-delay-passive = <250>;
5288			polling-delay = <1000>;
5289
5290			thermal-sensors = <&tsens0 15>;
5291
5292			trips {
5293				gpu1_alert0: trip-point0 {
5294					temperature = <90000>;
5295					hysteresis = <2000>;
5296					type = "hot";
5297				};
5298			};
5299		};
5300
5301		aoss1-thermal {
5302			polling-delay-passive = <250>;
5303			polling-delay = <1000>;
5304
5305			thermal-sensors = <&tsens1 0>;
5306
5307			trips {
5308				aoss1_alert0: trip-point0 {
5309					temperature = <90000>;
5310					hysteresis = <2000>;
5311					type = "hot";
5312				};
5313			};
5314		};
5315
5316		wlan-thermal {
5317			polling-delay-passive = <250>;
5318			polling-delay = <1000>;
5319
5320			thermal-sensors = <&tsens1 1>;
5321
5322			trips {
5323				wlan_alert0: trip-point0 {
5324					temperature = <90000>;
5325					hysteresis = <2000>;
5326					type = "hot";
5327				};
5328			};
5329		};
5330
5331		video-thermal {
5332			polling-delay-passive = <250>;
5333			polling-delay = <1000>;
5334
5335			thermal-sensors = <&tsens1 2>;
5336
5337			trips {
5338				video_alert0: trip-point0 {
5339					temperature = <90000>;
5340					hysteresis = <2000>;
5341					type = "hot";
5342				};
5343			};
5344		};
5345
5346		mem-thermal {
5347			polling-delay-passive = <250>;
5348			polling-delay = <1000>;
5349
5350			thermal-sensors = <&tsens1 3>;
5351
5352			trips {
5353				mem_alert0: trip-point0 {
5354					temperature = <90000>;
5355					hysteresis = <2000>;
5356					type = "hot";
5357				};
5358			};
5359		};
5360
5361		q6-hvx-thermal {
5362			polling-delay-passive = <250>;
5363			polling-delay = <1000>;
5364
5365			thermal-sensors = <&tsens1 4>;
5366
5367			trips {
5368				q6_hvx_alert0: trip-point0 {
5369					temperature = <90000>;
5370					hysteresis = <2000>;
5371					type = "hot";
5372				};
5373			};
5374		};
5375
5376		camera-thermal {
5377			polling-delay-passive = <250>;
5378			polling-delay = <1000>;
5379
5380			thermal-sensors = <&tsens1 5>;
5381
5382			trips {
5383				camera_alert0: trip-point0 {
5384					temperature = <90000>;
5385					hysteresis = <2000>;
5386					type = "hot";
5387				};
5388			};
5389		};
5390
5391		compute-thermal {
5392			polling-delay-passive = <250>;
5393			polling-delay = <1000>;
5394
5395			thermal-sensors = <&tsens1 6>;
5396
5397			trips {
5398				compute_alert0: trip-point0 {
5399					temperature = <90000>;
5400					hysteresis = <2000>;
5401					type = "hot";
5402				};
5403			};
5404		};
5405
5406		npu-thermal {
5407			polling-delay-passive = <250>;
5408			polling-delay = <1000>;
5409
5410			thermal-sensors = <&tsens1 7>;
5411
5412			trips {
5413				npu_alert0: trip-point0 {
5414					temperature = <90000>;
5415					hysteresis = <2000>;
5416					type = "hot";
5417				};
5418			};
5419		};
5420
5421		gpu-bottom-thermal {
5422			polling-delay-passive = <250>;
5423			polling-delay = <1000>;
5424
5425			thermal-sensors = <&tsens1 8>;
5426
5427			trips {
5428				gpu2_alert0: trip-point0 {
5429					temperature = <90000>;
5430					hysteresis = <2000>;
5431					type = "hot";
5432				};
5433			};
5434		};
5435	};
5436};
5437