1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> 4 */ 5 6/dts-v1/; 7 8/* PMK8350 is configured to use SID6 instead of 0 */ 9#define PMK8350_SID 6 10 11#include <dt-bindings/gpio/gpio.h> 12#include "sm6375.dtsi" 13#include "pm6125.dtsi" 14#include "pmk8350.dtsi" 15#include "pmr735a.dtsi" 16 17/* PM6125 PON is used and we can't have duplicate labels */ 18/delete-node/ &pmk8350_pon; 19 20/ { 21 model = "Sony Xperia 10 IV"; 22 compatible = "sony,pdx225", "qcom,sm6375"; 23 chassis-type = "handset"; 24 25 chosen { 26 #address-cells = <2>; 27 #size-cells = <2>; 28 ranges; 29 30 framebuffer: framebuffer@85200000 { 31 compatible = "simple-framebuffer"; 32 reg = <0 0x85200000 0 0xc00000>; 33 34 width = <1080>; 35 height = <2520>; 36 stride = <(1080 * 4)>; 37 format = "a8r8g8b8"; 38 /* 39 * That's (going to be) a lot of clocks, but it's necessary due 40 * to unused clk cleanup & no panel driver yet 41 */ 42 clocks = <&gcc GCC_DISP_AHB_CLK>, 43 <&gcc GCC_DISP_HF_AXI_CLK>, 44 <&gcc GCC_DISP_THROTTLE_CORE_CLK>, 45 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; 46 }; 47 }; 48 49 gpio-keys { 50 compatible = "gpio-keys"; 51 label = "gpio-keys"; 52 53 pinctrl-0 = <&vol_down_n>; 54 pinctrl-names = "default"; 55 56 key-volume-down { 57 label = "Volume Down"; 58 linux,code = <KEY_VOLUMEDOWN>; 59 gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; 60 debounce-interval = <15>; 61 linux,can-disable; 62 wakeup-source; 63 }; 64 }; 65 66 reserved-memory { 67 cont_splash_mem: memory@85200000 { 68 reg = <0 0x85200000 0 0xc00000>; 69 no-map; 70 }; 71 72 ramoops@ffc40000 { 73 compatible = "ramoops"; 74 reg = <0 0xffc40000 0 0xb0000>; 75 record-size = <0x10000>; 76 console-size = <0x60000>; 77 ftrace-size = <0x10000>; 78 pmsg-size = <0x20000>; 79 ecc-size = <16>; 80 }; 81 }; 82 83 vph_pwr: vph-pwr-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "vph_pwr"; 86 regulator-min-microvolt = <3700000>; 87 regulator-max-microvolt = <3700000>; 88 regulator-always-on; 89 regulator-boot-on; 90 }; 91}; 92 93&sdc2_off_state { 94 sd-cd-pins { 95 pins = "gpio94"; 96 function = "gpio"; 97 drive-strength = <2>; 98 bias-disable; 99 }; 100}; 101 102&sdc2_on_state { 103 sd-cd-pins { 104 pins = "gpio94"; 105 function = "gpio"; 106 drive-strength = <2>; 107 bias-pull-up; 108 }; 109}; 110 111&sdhc_2 { 112 status = "okay"; 113 114 vmmc-supply = <&pm6125_l22>; 115 vqmmc-supply = <&pm6125_l5>; 116 117 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; 118}; 119 120&gpi_dma0 { 121 status = "okay"; 122}; 123 124&gpi_dma1 { 125 status = "okay"; 126}; 127 128&i2c8 { 129 clock-frequency = <400000>; 130 status = "okay"; 131 132 touchscreen@48 { 133 compatible = "samsung,s6sy761"; 134 reg = <0x48>; 135 interrupt-parent = <&tlmm>; 136 interrupts = <22 0x2008>; 137 138 vdd-supply = <&pm6125_l13>; 139 140 pinctrl-names = "default"; 141 pinctrl-0 = <&ts_int_default &ts_avdd_default>; 142 }; 143}; 144 145&pmk8350_adc_tm { 146 status = "okay"; 147}; 148 149&pmk8350_rtc { 150 status = "okay"; 151}; 152 153&pmr735a_gpios { 154 vol_down_n: vol-down-n-state { 155 pins = "gpio1"; 156 function = "normal"; 157 power-source = <1>; 158 bias-pull-up; 159 input-enable; 160 }; 161}; 162 163&pon_pwrkey { 164 status = "okay"; 165}; 166 167&pon_resin { 168 linux,code = <KEY_VOLUMEUP>; 169 status = "okay"; 170}; 171 172&qupv3_id_0 { 173 status = "okay"; 174}; 175 176&qupv3_id_1 { 177 status = "okay"; 178}; 179 180&remoteproc_adsp { 181 firmware-name = "qcom/Sony/murray/adsp.mbn"; 182 status = "okay"; 183}; 184 185&remoteproc_cdsp { 186 firmware-name = "qcom/Sony/murray/cdsp.mbn"; 187 status = "okay"; 188}; 189 190&rpm_requests { 191 regulators-0 { 192 compatible = "qcom,rpm-pm6125-regulators"; 193 194 pm6125_s5: s5 { 195 regulator-min-microvolt = <382000>; 196 regulator-max-microvolt = <1120000>; 197 }; 198 199 pm6125_s6: s6 { 200 regulator-min-microvolt = <320000>; 201 regulator-max-microvolt = <1374000>; 202 }; 203 204 pm6125_s7: s7 { 205 regulator-min-microvolt = <1574000>; 206 regulator-max-microvolt = <2040000>; 207 }; 208 209 /* 210 * S8 is VDD_GFX 211 * L1 is VDD_LPI_CX 212 */ 213 214 pm6125_l2: l2 { 215 regulator-min-microvolt = <1170000>; 216 regulator-max-microvolt = <1304000>; 217 }; 218 219 pm6125_l3: l3 { 220 regulator-min-microvolt = <1100000>; 221 regulator-max-microvolt = <1300000>; 222 }; 223 224 pm6125_l4: l4 { 225 regulator-min-microvolt = <1100000>; 226 regulator-max-microvolt = <1300000>; 227 }; 228 229 pm6125_l5: l5 { 230 regulator-min-microvolt = <1650000>; 231 regulator-max-microvolt = <2960000>; 232 regulator-allow-set-load; 233 }; 234 235 pm6125_l6: l6 { 236 regulator-min-microvolt = <1080000>; 237 regulator-max-microvolt = <1304000>; 238 }; 239 240 pm6125_l7: l7 { 241 regulator-min-microvolt = <720000>; 242 regulator-max-microvolt = <1050000>; 243 }; 244 245 pm6125_l8: l8 { 246 regulator-min-microvolt = <1100000>; 247 regulator-max-microvolt = <1304000>; 248 }; 249 250 pm6125_l9: l9 { 251 regulator-min-microvolt = <1504000>; 252 regulator-max-microvolt = <2000000>; 253 }; 254 255 pm6125_l10: l10 { 256 regulator-min-microvolt = <1620000>; 257 regulator-max-microvolt = <1980000>; 258 }; 259 260 pm6125_l11: l11 { 261 regulator-min-microvolt = <1620000>; 262 regulator-max-microvolt = <1980000>; 263 }; 264 265 pm6125_l12: l12 { 266 regulator-min-microvolt = <1620000>; 267 regulator-max-microvolt = <2000000>; 268 }; 269 270 pm6125_l13: l13 { 271 regulator-min-microvolt = <1650000>; 272 regulator-max-microvolt = <1980000>; 273 }; 274 275 pm6125_l14: l14 { 276 regulator-min-microvolt = <1700000>; 277 regulator-max-microvolt = <1900000>; 278 }; 279 280 pm6125_l15: l15 { 281 regulator-min-microvolt = <1650000>; 282 regulator-max-microvolt = <3544000>; 283 }; 284 285 pm6125_l16: l16 { 286 regulator-min-microvolt = <1620000>; 287 regulator-max-microvolt = <1980000>; 288 }; 289 290 /* L17 is VDD_LPI_MX */ 291 292 pm6125_l18: l18 { 293 regulator-min-microvolt = <830000>; 294 regulator-max-microvolt = <920000>; 295 }; 296 297 pm6125_l19: l19 { 298 regulator-min-microvolt = <1624000>; 299 regulator-max-microvolt = <3304000>; 300 }; 301 302 pm6125_l20: l20 { 303 regulator-min-microvolt = <1624000>; 304 regulator-max-microvolt = <3304000>; 305 }; 306 307 pm6125_l21: l21 { 308 regulator-min-microvolt = <3000000>; 309 regulator-max-microvolt = <3400000>; 310 }; 311 312 pm6125_l22: l22 { 313 regulator-min-microvolt = <2704000>; 314 regulator-max-microvolt = <2960000>; 315 regulator-allow-set-load; 316 }; 317 318 pm6125_l23: l23 { 319 regulator-min-microvolt = <3000000>; 320 regulator-max-microvolt = <3400000>; 321 }; 322 323 pm6125_l24: l24 { 324 regulator-min-microvolt = <2704000>; 325 regulator-max-microvolt = <3544000>; 326 }; 327 }; 328 329 regulators-1 { 330 compatible = "qcom,rpm-pmr735a-regulators"; 331 332 /* 333 * S1 is VDD_MX 334 * S2 is VDD_CX 335 */ 336 337 pmr735a_l1: l1 { 338 regulator-min-microvolt = <570000>; 339 regulator-max-microvolt = <650000>; 340 }; 341 342 pmr735a_l2: l2 { 343 regulator-min-microvolt = <352000>; 344 regulator-max-microvolt = <796000>; 345 }; 346 347 pmr735a_l3: l3 { 348 regulator-min-microvolt = <1000000>; 349 regulator-max-microvolt = <1200000>; 350 }; 351 352 pmr735a_l4: l4 { 353 regulator-min-microvolt = <1504000>; 354 regulator-max-microvolt = <2000000>; 355 }; 356 357 pmr735a_l5: l5 { 358 regulator-min-microvolt = <751000>; 359 regulator-max-microvolt = <824000>; 360 }; 361 362 pmr735a_l6: l6 { 363 regulator-min-microvolt = <504000>; 364 regulator-max-microvolt = <868000>; 365 }; 366 367 pmr735a_l7: l7 { 368 regulator-min-microvolt = <2700000>; 369 regulator-max-microvolt = <3544000>; 370 }; 371 }; 372}; 373 374&sdc2_off_state { 375 sd-cd-pins { 376 pins = "gpio94"; 377 function = "gpio"; 378 drive-strength = <2>; 379 bias-disable; 380 }; 381}; 382 383&sdc2_on_state { 384 sd-cd-pins { 385 pins = "gpio94"; 386 function = "gpio"; 387 drive-strength = <2>; 388 bias-pull-up; 389 }; 390}; 391 392&sdhc_2 { 393 status = "okay"; 394 395 vmmc-supply = <&pm6125_l22>; 396 vqmmc-supply = <&pm6125_l5>; 397 398 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; 399}; 400 401&tlmm { 402 gpio-reserved-ranges = <13 4>; 403 404 ts_int_default: ts-int-default-state { 405 pins = "gpio22"; 406 function = "gpio"; 407 drive-strength = <8>; 408 bias-pull-up; 409 }; 410 411 ts_avdd_default: ts-avdd-default-state { 412 pins = "gpio59"; 413 function = "gpio"; 414 drive-strength = <8>; 415 output-high; 416 }; 417}; 418 419&usb_1 { 420 status = "okay"; 421}; 422 423&usb_1_dwc3 { 424 dr_mode = "peripheral"; 425}; 426 427&usb_1_hsphy { 428 status = "okay"; 429}; 430 431&xo_board_clk { 432 clock-frequency = <19200000>; 433}; 434