1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6/dts-v1/;
7
8#include "sm6125.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/input/gpio-keys.h>
12
13/ {
14	/* required for bootloader to select correct board */
15	qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
16	qcom,board-id = <34 0>;
17
18	model = "Sony Xperia 10 II";
19	compatible = "sony,pdx201", "qcom,sm6125";
20
21	chosen {
22		#address-cells = <2>;
23		#size-cells = <2>;
24		ranges;
25
26		framebuffer0: framebuffer@5c000000 {
27			compatible = "simple-framebuffer";
28			reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
29			width = <1080>;
30			height = <2520>;
31			stride = <(1080 * 4)>;
32			format = "a8r8g8b8";
33		};
34	};
35
36	extcon_usb: extcon-usb {
37		compatible = "linux,extcon-usb-gpio";
38		id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
39	};
40
41	gpio-keys {
42		status = "okay";
43		compatible = "gpio-keys";
44		input-name = "gpio-keys";
45		#address-cells = <1>;
46		#size-cells = <0>;
47		autorepeat;
48
49		vol-dn {
50			label = "Volume Down";
51			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
52			linux,input-type = <1>;
53			linux,code = <KEY_VOLUMEDOWN>;
54			gpio-key,wakeup;
55			debounce-interval = <15>;
56		};
57	};
58
59	reserved_memory {
60		#address-cells = <2>;
61		#size-cells = <2>;
62		debug_mem: memory@ffb00000 {
63			reg = <0x0 0xffb00000 0x0 0xc0000>;
64			no-map;
65		};
66
67		last_log_mem: memory@ffbc0000 {
68			reg = <0x0 0xffbc0000 0x0 0x80000>;
69			no-map;
70		};
71
72		pstore_mem: ramoops@ffc00000 {
73			compatible = "ramoops";
74			reg = <0x0 0xffc40000 0x0 0xc0000>;
75			record-size = <0x1000>;
76			console-size = <0x40000>;
77			msg-size = <0x20000 0x20000>;
78		};
79
80		cmdline_mem: memory@ffd00000 {
81			reg = <0x0 0xffd40000 0x0 0x1000>;
82			no-map;
83		};
84	};
85};
86
87&hsusb_phy1 {
88	status = "okay";
89};
90
91&sdc2_state_off {
92	sd-cd {
93		pins = "gpio98";
94		bias-disable;
95		drive-strength = <2>;
96	};
97};
98
99&sdhc_1 {
100	status = "okay";
101};
102
103&tlmm {
104	gpio-reserved-ranges = <22 2>, <28 6>;
105
106	sdc2_state_on: sdc2-on {
107		clk {
108			pins = "sdc2_clk";
109			bias-disable;
110			drive-strength = <16>;
111		};
112
113		cmd {
114			pins = "sdc2_cmd";
115			bias-pull-up;
116			drive-strength = <10>;
117		};
118
119		data {
120			pins = "sdc2_data";
121			bias-pull-up;
122			drive-strength = <10>;
123		};
124
125		sd-cd {
126			pins = "gpio98";
127			bias-pull-up;
128			drive-strength = <2>;
129		};
130	};
131};
132
133&usb3 {
134	status = "okay";
135};
136
137&usb3_dwc3 {
138	extcon = <&extcon_usb>;
139};
140