1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Lenovo Yoga C630
4 *
5 * Copyright (c) 2019, Linaro Ltd.
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/input/gpio-keys.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13#include <dt-bindings/sound/qcom,q6afe.h>
14#include <dt-bindings/sound/qcom,q6asm.h>
15#include "sdm850.dtsi"
16#include "sdm845-wcd9340.dtsi"
17#include "pm8998.dtsi"
18
19/*
20 * Update following upstream (sdm845.dtsi) reserved
21 * memory mappings for firmware loading to succeed
22 * and enable the IPA device.
23 */
24/delete-node/ &ipa_fw_mem;
25/delete-node/ &ipa_gsi_mem;
26/delete-node/ &gpu_mem;
27/delete-node/ &adsp_mem;
28/delete-node/ &wlan_msa_mem;
29
30/ {
31	model = "Lenovo Yoga C630";
32	compatible = "lenovo,yoga-c630", "qcom,sdm845";
33	chassis-type = "convertible";
34
35	aliases {
36		serial0 = &uart9;
37		serial1 = &uart6;
38	};
39
40	gpio-keys {
41		compatible = "gpio-keys";
42
43		pinctrl-names = "default";
44		pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
45
46		switch-lid {
47			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
48			linux,input-type = <EV_SW>;
49			linux,code = <SW_LID>;
50			wakeup-source;
51			wakeup-event-action = <EV_ACT_DEASSERTED>;
52		};
53
54		switch-mode {
55			gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
56			linux,input-type = <EV_SW>;
57			linux,code = <SW_TABLET_MODE>;
58		};
59	};
60
61	/* Reserved memory changes for IPA */
62	reserved-memory {
63		wlan_msa_mem: memory@8c400000 {
64			reg = <0 0x8c400000 0 0x100000>;
65			no-map;
66		};
67
68		gpu_mem: memory@8c515000 {
69			reg = <0 0x8c515000 0 0x2000>;
70			no-map;
71		};
72
73		ipa_fw_mem: memory@8c517000 {
74			reg = <0 0x8c517000 0 0x5a000>;
75			no-map;
76		};
77
78		adsp_mem: memory@8c600000 {
79			reg = <0 0x8c600000 0 0x1a00000>;
80			no-map;
81		};
82	};
83
84	sw_edp_1p2: edp-1p2-regulator {
85		compatible = "regulator-fixed";
86		regulator-name = "sw_edp_1p2";
87
88		regulator-min-microvolt = <1200000>;
89		regulator-max-microvolt = <1200000>;
90
91		pinctrl-0 = <&sw_edp_1p2_en>;
92		pinctrl-names = "default";
93
94		gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
95		enable-active-high;
96
97		vin-supply = <&vreg_l2a_1p2>;
98	};
99
100	sn65dsi86_refclk: sn65dsi86-refclk {
101		compatible = "fixed-clock";
102		#clock-cells = <0>;
103
104		clock-frequency = <19200000>;
105	};
106
107	vph_pwr: regulator-vph-pwr {
108		compatible = "regulator-fixed";
109		regulator-name = "vph_pwr";
110		regulator-min-microvolt = <3700000>;
111		regulator-max-microvolt = <3700000>;
112	};
113
114	vlcm_3v3: regulator-vlcm-3v3 {
115		compatible = "regulator-fixed";
116		regulator-name = "vlcm_3v3";
117
118		vin-supply = <&vph_pwr>;
119		regulator-min-microvolt = <3300000>;
120		regulator-max-microvolt = <3300000>;
121
122		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
123		enable-active-high;
124	};
125
126	backlight: backlight {
127		compatible = "pwm-backlight";
128		pwms = <&sn65dsi86 1000000>;
129		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
130	};
131};
132
133&adsp_pas {
134	firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn";
135	status = "okay";
136};
137
138&apps_rsc {
139	regulators-0 {
140		compatible = "qcom,pm8998-rpmh-regulators";
141		qcom,pmic-id = "a";
142
143		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
144		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
145
146		vreg_s2a_1p125: smps2 {
147		};
148
149		vreg_s3a_1p35: smps3 {
150			regulator-min-microvolt = <1352000>;
151			regulator-max-microvolt = <1352000>;
152			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
153		};
154
155		vreg_s4a_1p8: smps4 {
156			regulator-min-microvolt = <1800000>;
157			regulator-max-microvolt = <1800000>;
158			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
159		};
160
161		vreg_s5a_2p04: smps5 {
162			regulator-min-microvolt = <2040000>;
163			regulator-max-microvolt = <2040000>;
164			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
165		};
166
167		vreg_s7a_1p025: smps7 {
168		};
169
170		vdd_qusb_hs0:
171		vdda_hp_pcie_core:
172		vdda_mipi_csi0_0p9:
173		vdda_mipi_csi1_0p9:
174		vdda_mipi_csi2_0p9:
175		vdda_mipi_dsi0_pll:
176		vdda_mipi_dsi1_pll:
177		vdda_qlink_lv:
178		vdda_qlink_lv_ck:
179		vdda_qrefs_0p875:
180		vdda_pcie_core:
181		vdda_pll_cc_ebi01:
182		vdda_pll_cc_ebi23:
183		vdda_sp_sensor:
184		vdda_ufs1_core:
185		vdda_ufs2_core:
186		vdda_usb1_ss_core:
187		vdda_usb2_ss_core:
188		vreg_l1a_0p875: ldo1 {
189			regulator-min-microvolt = <880000>;
190			regulator-max-microvolt = <880000>;
191			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192		};
193
194		vddpx_10:
195		vreg_l2a_1p2: ldo2 {
196			regulator-min-microvolt = <1200000>;
197			regulator-max-microvolt = <1200000>;
198			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
199			regulator-always-on;
200		};
201
202		vreg_l3a_1p0: ldo3 {
203		};
204
205		vdd_wcss_cx:
206		vdd_wcss_mx:
207		vdda_wcss_pll:
208		vreg_l5a_0p8: ldo5 {
209			regulator-min-microvolt = <800000>;
210			regulator-max-microvolt = <800000>;
211			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212		};
213
214		vddpx_13:
215		vreg_l6a_1p8: ldo6 {
216			regulator-min-microvolt = <1800000>;
217			regulator-max-microvolt = <1800000>;
218			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
219		};
220
221		vreg_l7a_1p8: ldo7 {
222			regulator-min-microvolt = <1800000>;
223			regulator-max-microvolt = <1800000>;
224			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225		};
226
227		vreg_l8a_1p2: ldo8 {
228		};
229
230		vreg_l9a_1p8: ldo9 {
231		};
232
233		vreg_l10a_1p8: ldo10 {
234		};
235
236		vreg_l11a_1p0: ldo11 {
237		};
238
239		vdd_qfprom:
240		vdd_qfprom_sp:
241		vdda_apc1_cs_1p8:
242		vdda_gfx_cs_1p8:
243		vdda_qrefs_1p8:
244		vdda_qusb_hs0_1p8:
245		vddpx_11:
246		vreg_l12a_1p8: ldo12 {
247			regulator-min-microvolt = <1800000>;
248			regulator-max-microvolt = <1800000>;
249			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250		};
251
252		vddpx_2:
253		vreg_l13a_2p95: ldo13 {
254		};
255
256		vreg_l14a_1p88: ldo14 {
257			regulator-min-microvolt = <1880000>;
258			regulator-max-microvolt = <1880000>;
259			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
260			regulator-always-on;
261		};
262
263		vreg_l15a_1p8: ldo15 {
264		};
265
266		vreg_l16a_2p7: ldo16 {
267		};
268
269		vreg_l17a_1p3: ldo17 {
270			regulator-min-microvolt = <1304000>;
271			regulator-max-microvolt = <1304000>;
272			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273		};
274
275		vreg_l18a_2p7: ldo18 {
276		};
277
278		vreg_l19a_3p0: ldo19 {
279			regulator-min-microvolt = <3100000>;
280			regulator-max-microvolt = <3108000>;
281			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282		};
283
284		vreg_l20a_2p95: ldo20 {
285			regulator-min-microvolt = <2960000>;
286			regulator-max-microvolt = <2960000>;
287			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
288		};
289
290		vreg_l21a_2p95: ldo21 {
291		};
292
293		vreg_l22a_2p85: ldo22 {
294		};
295
296		vreg_l23a_3p3: ldo23 {
297			regulator-min-microvolt = <3300000>;
298			regulator-max-microvolt = <3312000>;
299			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
300		};
301
302		vdda_qusb_hs0_3p1:
303		vreg_l24a_3p075: ldo24 {
304			regulator-min-microvolt = <3075000>;
305			regulator-max-microvolt = <3083000>;
306			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307		};
308
309		vreg_l25a_3p3: ldo25 {
310			regulator-min-microvolt = <3104000>;
311			regulator-max-microvolt = <3112000>;
312			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313		};
314
315		vdda_hp_pcie_1p2:
316		vdda_hv_ebi0:
317		vdda_hv_ebi1:
318		vdda_hv_ebi2:
319		vdda_hv_ebi3:
320		vdda_mipi_csi_1p25:
321		vdda_mipi_dsi0_1p2:
322		vdda_mipi_dsi1_1p2:
323		vdda_pcie_1p2:
324		vdda_ufs1_1p2:
325		vdda_ufs2_1p2:
326		vdda_usb1_ss_1p2:
327		vdda_usb2_ss_1p2:
328		vreg_l26a_1p2: ldo26 {
329			regulator-min-microvolt = <1200000>;
330			regulator-max-microvolt = <1208000>;
331			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332		};
333
334		vreg_l28a_3p0: ldo28 {
335		};
336
337		vreg_lvs1a_1p8: lvs1 {
338		};
339
340		vreg_lvs2a_1p8: lvs2 {
341		};
342	};
343};
344
345&cdsp_pas {
346	firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn";
347	status = "okay";
348};
349
350&gcc {
351	protected-clocks = <GCC_QSPI_CORE_CLK>,
352			   <GCC_QSPI_CORE_CLK_SRC>,
353			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
354			   <GCC_LPASS_Q6_AXI_CLK>,
355			   <GCC_LPASS_SWAY_CLK>;
356};
357
358&gmu {
359	status = "okay";
360};
361
362&gpu {
363	status = "okay";
364	zap-shader {
365		memory-region = <&gpu_mem>;
366		firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
367	};
368};
369
370&i2c1 {
371	status = "okay";
372	clock-frequency = <400000>;
373};
374
375&i2c3 {
376	status = "okay";
377	clock-frequency = <400000>;
378	/* Overwrite pinctrl-0 from sdm845.dtsi */
379	pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
380
381	tsel: hid@15 {
382		compatible = "hid-over-i2c";
383		reg = <0x15>;
384		hid-descr-addr = <0x1>;
385
386		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
387	};
388
389	tsc2: hid@2c {
390		compatible = "hid-over-i2c";
391		reg = <0x2c>;
392		hid-descr-addr = <0x20>;
393
394		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
395	};
396};
397
398&i2c5 {
399	status = "okay";
400	clock-frequency = <400000>;
401
402	tsc1: hid@10 {
403		compatible = "hid-over-i2c";
404		reg = <0x10>;
405		hid-descr-addr = <0x1>;
406
407		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
408
409		pinctrl-names = "default";
410		pinctrl-0 = <&i2c5_hid_active>;
411	};
412};
413
414&i2c10 {
415	status = "okay";
416	clock-frequency = <400000>;
417
418	sn65dsi86: bridge@2c {
419		compatible = "ti,sn65dsi86";
420		reg = <0x2c>;
421		pinctrl-names = "default";
422		pinctrl-0 = <&sn65dsi86_pin_active>;
423
424		enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
425
426		vcca-supply = <&sw_edp_1p2>;
427		vcc-supply = <&sw_edp_1p2>;
428		vpll-supply = <&vreg_l14a_1p88>;
429		vccio-supply = <&vreg_l14a_1p88>;
430
431		clocks = <&sn65dsi86_refclk>;
432		clock-names = "refclk";
433
434		no-hpd;
435		#pwm-cells = <1>;
436
437		ports {
438			#address-cells = <1>;
439			#size-cells = <0>;
440
441			port@0 {
442				reg = <0>;
443				sn65dsi86_in_a: endpoint {
444					remote-endpoint = <&mdss_dsi0_out>;
445				};
446			};
447
448			port@1 {
449				reg = <1>;
450				sn65dsi86_out: endpoint {
451					remote-endpoint = <&panel_in_edp>;
452				};
453			};
454		};
455
456		aux-bus {
457			panel: panel {
458				compatible = "boe,nv133fhm-n61";
459				backlight = <&backlight>;
460				power-supply = <&vlcm_3v3>;
461
462				port {
463					panel_in_edp: endpoint {
464						remote-endpoint = <&sn65dsi86_out>;
465					};
466				};
467			};
468		};
469	};
470};
471
472&i2c11 {
473	status = "okay";
474	clock-frequency = <400000>;
475
476	ecsh: hid@5c {
477		compatible = "hid-over-i2c";
478		reg = <0x5c>;
479		hid-descr-addr = <0x1>;
480
481		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
482
483		pinctrl-names = "default";
484		pinctrl-0 = <&i2c11_hid_active>;
485	};
486};
487
488&ipa {
489	qcom,gsi-loader = "self";
490	memory-region = <&ipa_fw_mem>;
491	status = "okay";
492};
493
494&mdss {
495	status = "okay";
496};
497
498&mdss_dsi0 {
499	status = "okay";
500	vdda-supply = <&vreg_l26a_1p2>;
501
502	ports {
503		port@1 {
504			endpoint {
505				remote-endpoint = <&sn65dsi86_in_a>;
506				data-lanes = <0 1 2 3>;
507			};
508		};
509	};
510};
511
512&mdss_dsi0_phy {
513	status = "okay";
514	vdds-supply = <&vreg_l1a_0p875>;
515};
516
517&mss_pil {
518	status = "okay";
519	firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
520};
521
522&pm8998_gpios {
523	/* This pin is pulled down by a fixed resistor */
524	sw_edp_1p2_en: pm8998-gpio9-state {
525		pins = "gpio9";
526		function = "normal";
527		bias-disable;
528		qcom,drive-strength = <0>;
529	};
530};
531
532&qup_i2c10_default {
533	drive-strength = <2>;
534	bias-disable;
535};
536
537&qup_i2c12_default {
538	drive-strength = <2>;
539	bias-disable;
540};
541
542&qupv3_id_0 {
543	status = "okay";
544};
545
546&qupv3_id_1 {
547	status = "okay";
548};
549
550&q6asmdai {
551	dai@0 {
552		reg = <0>;
553	};
554
555	dai@1 {
556		reg = <1>;
557	};
558
559	dai@2 {
560		reg = <2>;
561	};
562};
563
564&sound {
565	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
566	model = "Lenovo-YOGA-C630-13Q50";
567
568	audio-routing =
569		"RX_BIAS", "MCLK",
570		"AMIC2", "MIC BIAS2",
571		"SpkrLeft IN", "SPK1 OUT",
572		"SpkrRight IN", "SPK2 OUT",
573		"MM_DL1",  "MultiMedia1 Playback",
574		"MM_DL3",  "MultiMedia3 Playback",
575		"MultiMedia2 Capture", "MM_UL2";
576
577	mm1-dai-link {
578		link-name = "MultiMedia1";
579		cpu {
580			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
581		};
582	};
583
584	mm2-dai-link {
585		link-name = "MultiMedia2";
586		cpu {
587			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
588		};
589	};
590
591	mm3-dai-link {
592		link-name = "MultiMedia3";
593		cpu {
594			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
595		};
596	};
597
598	slim-dai-link {
599		link-name = "SLIM Playback";
600		cpu {
601			sound-dai = <&q6afedai SLIMBUS_0_RX>;
602		};
603
604		platform {
605			sound-dai = <&q6routing>;
606		};
607
608		codec {
609			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
610		};
611	};
612
613	slimcap-dai-link {
614		link-name = "SLIM Capture";
615		cpu {
616			sound-dai = <&q6afedai SLIMBUS_0_TX>;
617		};
618
619		platform {
620			sound-dai = <&q6routing>;
621		};
622
623		codec {
624			sound-dai = <&wcd9340 1>;
625		};
626	};
627
628	slim-wcd-dai-link {
629		link-name = "SLIM WCD Playback";
630		cpu {
631			sound-dai = <&q6afedai SLIMBUS_1_RX>;
632		};
633
634		platform {
635			sound-dai = <&q6routing>;
636		};
637
638		codec {
639			sound-dai = <&wcd9340 2>;
640		};
641	};
642};
643
644&tlmm {
645	gpio-reserved-ranges = <0 4>, <81 4>;
646
647	sn65dsi86_pin_active: sn65dsi86-enable-state {
648		pins = "gpio96";
649		function = "gpio";
650		drive-strength = <2>;
651		bias-disable;
652	};
653
654	i2c3_hid_active: i2c2-hid-active-state {
655		pins = "gpio37";
656		function = "gpio";
657
658		bias-pull-up;
659		drive-strength = <2>;
660	};
661
662	i2c5_hid_active: i2c5-hid-active-state {
663		pins = "gpio125";
664		function = "gpio";
665
666		bias-pull-up;
667		drive-strength = <2>;
668	};
669
670	i2c11_hid_active: i2c11-hid-active-state {
671		pins = "gpio92";
672		function = "gpio";
673
674		bias-pull-up;
675		drive-strength = <2>;
676	};
677
678	lid_pin_active: lid-pin-state {
679		pins = "gpio124";
680		function = "gpio";
681
682		bias-disable;
683	};
684
685	mode_pin_active: mode-pin-state {
686		pins = "gpio95";
687		function = "gpio";
688
689		bias-disable;
690	};
691};
692
693&uart6 {
694	pinctrl-names = "default";
695	pinctrl-0 = <&qup_uart6_4pin>;
696	status = "okay";
697
698	bluetooth {
699		compatible = "qcom,wcn3990-bt";
700
701		vddio-supply = <&vreg_s4a_1p8>;
702		vddxo-supply = <&vreg_l7a_1p8>;
703		vddrf-supply = <&vreg_l17a_1p3>;
704		vddch0-supply = <&vreg_l25a_3p3>;
705		vddch1-supply = <&vreg_l23a_3p3>;
706		max-speed = <3200000>;
707	};
708};
709
710&uart9 {
711	status = "okay";
712};
713
714&ufs_mem_hc {
715	status = "okay";
716
717	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
718
719	vcc-supply = <&vreg_l20a_2p95>;
720	vcc-max-microamp = <600000>;
721};
722
723&ufs_mem_phy {
724	status = "okay";
725
726	vdda-phy-supply = <&vdda_ufs1_core>;
727	vdda-pll-supply = <&vdda_ufs1_1p2>;
728};
729
730&usb_1 {
731	status = "okay";
732};
733
734&usb_1_dwc3 {
735	dr_mode = "host";
736};
737
738&usb_1_hsphy {
739	status = "okay";
740
741	vdd-supply = <&vdda_usb1_ss_core>;
742	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
743	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
744
745	qcom,imp-res-offset-value = <8>;
746	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
747	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
748	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
749};
750
751&usb_1_qmpphy {
752	status = "okay";
753
754	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
755	vdda-pll-supply = <&vdda_usb1_ss_core>;
756};
757
758&usb_2 {
759	status = "okay";
760};
761
762&usb_2_dwc3 {
763	dr_mode = "host";
764};
765
766&usb_2_hsphy {
767	status = "okay";
768
769	vdd-supply = <&vdda_usb2_ss_core>;
770	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
771	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
772
773	qcom,imp-res-offset-value = <8>;
774	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
775};
776
777&usb_2_qmpphy {
778	status = "okay";
779
780	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
781	vdda-pll-supply = <&vdda_usb2_ss_core>;
782};
783
784&venus {
785	firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn";
786	status = "okay";
787};
788
789&wcd9340 {
790	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
791	vdd-buck-supply = <&vreg_s4a_1p8>;
792	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
793	vdd-tx-supply = <&vreg_s4a_1p8>;
794	vdd-rx-supply = <&vreg_s4a_1p8>;
795	vdd-io-supply = <&vreg_s4a_1p8>;
796	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
797	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
798	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
799
800	swm: swm@c85 {
801		left_spkr: speaker@0,3 {
802			compatible = "sdw10217211000";
803			reg = <0 3>;
804			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
805			#thermal-sensor-cells = <0>;
806			sound-name-prefix = "SpkrLeft";
807			#sound-dai-cells = <0>;
808		};
809
810		right_spkr: speaker@0,4 {
811			compatible = "sdw10217211000";
812			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
813			reg = <0 4>;
814			#thermal-sensor-cells = <0>;
815			sound-name-prefix = "SpkrRight";
816			#sound-dai-cells = <0>;
817		};
818	};
819};
820
821&wifi {
822	status = "okay";
823
824	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
825	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
826	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
827	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
828	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
829
830	qcom,snoc-host-cap-8bit-quirk;
831};
832
833&crypto {
834	/* FIXME: qce_start triggers an SError */
835	status = "disabled";
836};
837