1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Lenovo Yoga C630
4 *
5 * Copyright (c) 2019, Linaro Ltd.
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/input/gpio-keys.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13#include <dt-bindings/sound/qcom,q6afe.h>
14#include <dt-bindings/sound/qcom,q6asm.h>
15#include "sdm850.dtsi"
16#include "pm8998.dtsi"
17
18/*
19 * Update following upstream (sdm845.dtsi) reserved
20 * memory mappings for firmware loading to succeed
21 * and enable the IPA device.
22 */
23/delete-node/ &ipa_fw_mem;
24/delete-node/ &ipa_gsi_mem;
25/delete-node/ &gpu_mem;
26/delete-node/ &adsp_mem;
27/delete-node/ &wlan_msa_mem;
28
29/ {
30	model = "Lenovo Yoga C630";
31	compatible = "lenovo,yoga-c630", "qcom,sdm845";
32	chassis-type = "convertible";
33
34	aliases {
35		hsuart0 = &uart6;
36	};
37
38	gpio-keys {
39		compatible = "gpio-keys";
40
41		pinctrl-names = "default";
42		pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
43
44		switch-lid {
45			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
46			linux,input-type = <EV_SW>;
47			linux,code = <SW_LID>;
48			wakeup-source;
49			wakeup-event-action = <EV_ACT_DEASSERTED>;
50		};
51
52		switch-mode {
53			gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
54			linux,input-type = <EV_SW>;
55			linux,code = <SW_TABLET_MODE>;
56		};
57	};
58
59	/* Reserved memory changes for IPA */
60	reserved-memory {
61		wlan_msa_mem: memory@8c400000 {
62			reg = <0 0x8c400000 0 0x100000>;
63			no-map;
64		};
65
66		gpu_mem: memory@8c515000 {
67			reg = <0 0x8c515000 0 0x2000>;
68			no-map;
69		};
70
71		ipa_fw_mem: memory@8c517000 {
72			reg = <0 0x8c517000 0 0x5a000>;
73			no-map;
74		};
75
76		adsp_mem: memory@8c600000 {
77			reg = <0 0x8c600000 0 0x1a00000>;
78			no-map;
79		};
80	};
81
82	sn65dsi86_refclk: sn65dsi86-refclk {
83		compatible = "fixed-clock";
84		#clock-cells = <0>;
85
86		clock-frequency = <19200000>;
87	};
88
89	backlight: backlight {
90		compatible = "pwm-backlight";
91		pwms = <&sn65dsi86 1000000>;
92		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
93	};
94};
95
96&adsp_pas {
97	firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
98	status = "okay";
99};
100
101&apps_rsc {
102	pm8998-rpmh-regulators {
103		compatible = "qcom,pm8998-rpmh-regulators";
104		qcom,pmic-id = "a";
105
106		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
107		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
108
109		vreg_s2a_1p125: smps2 {
110		};
111
112		vreg_s3a_1p35: smps3 {
113			regulator-min-microvolt = <1352000>;
114			regulator-max-microvolt = <1352000>;
115			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
116		};
117
118		vreg_s4a_1p8: smps4 {
119			regulator-min-microvolt = <1800000>;
120			regulator-max-microvolt = <1800000>;
121			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
122		};
123
124		vreg_s5a_2p04: smps5 {
125			regulator-min-microvolt = <2040000>;
126			regulator-max-microvolt = <2040000>;
127			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
128		};
129
130		vreg_s7a_1p025: smps7 {
131		};
132
133		vdd_qusb_hs0:
134		vdda_hp_pcie_core:
135		vdda_mipi_csi0_0p9:
136		vdda_mipi_csi1_0p9:
137		vdda_mipi_csi2_0p9:
138		vdda_mipi_dsi0_pll:
139		vdda_mipi_dsi1_pll:
140		vdda_qlink_lv:
141		vdda_qlink_lv_ck:
142		vdda_qrefs_0p875:
143		vdda_pcie_core:
144		vdda_pll_cc_ebi01:
145		vdda_pll_cc_ebi23:
146		vdda_sp_sensor:
147		vdda_ufs1_core:
148		vdda_ufs2_core:
149		vdda_usb1_ss_core:
150		vdda_usb2_ss_core:
151		vreg_l1a_0p875: ldo1 {
152			regulator-min-microvolt = <880000>;
153			regulator-max-microvolt = <880000>;
154			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
155		};
156
157		vddpx_10:
158		vreg_l2a_1p2: ldo2 {
159			regulator-min-microvolt = <1200000>;
160			regulator-max-microvolt = <1200000>;
161			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
162			regulator-always-on;
163		};
164
165		vreg_l3a_1p0: ldo3 {
166		};
167
168		vdd_wcss_cx:
169		vdd_wcss_mx:
170		vdda_wcss_pll:
171		vreg_l5a_0p8: ldo5 {
172			regulator-min-microvolt = <800000>;
173			regulator-max-microvolt = <800000>;
174			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
175		};
176
177		vddpx_13:
178		vreg_l6a_1p8: ldo6 {
179			regulator-min-microvolt = <1800000>;
180			regulator-max-microvolt = <1800000>;
181			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
182		};
183
184		vreg_l7a_1p8: ldo7 {
185			regulator-min-microvolt = <1800000>;
186			regulator-max-microvolt = <1800000>;
187			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188		};
189
190		vreg_l8a_1p2: ldo8 {
191		};
192
193		vreg_l9a_1p8: ldo9 {
194		};
195
196		vreg_l10a_1p8: ldo10 {
197		};
198
199		vreg_l11a_1p0: ldo11 {
200		};
201
202		vdd_qfprom:
203		vdd_qfprom_sp:
204		vdda_apc1_cs_1p8:
205		vdda_gfx_cs_1p8:
206		vdda_qrefs_1p8:
207		vdda_qusb_hs0_1p8:
208		vddpx_11:
209		vreg_l12a_1p8: ldo12 {
210			regulator-min-microvolt = <1800000>;
211			regulator-max-microvolt = <1800000>;
212			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213		};
214
215		vddpx_2:
216		vreg_l13a_2p95: ldo13 {
217		};
218
219		vreg_l14a_1p88: ldo14 {
220			regulator-min-microvolt = <1880000>;
221			regulator-max-microvolt = <1880000>;
222			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
223			regulator-always-on;
224		};
225
226		vreg_l15a_1p8: ldo15 {
227		};
228
229		vreg_l16a_2p7: ldo16 {
230		};
231
232		vreg_l17a_1p3: ldo17 {
233			regulator-min-microvolt = <1304000>;
234			regulator-max-microvolt = <1304000>;
235			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
236		};
237
238		vreg_l18a_2p7: ldo18 {
239		};
240
241		vreg_l19a_3p0: ldo19 {
242			regulator-min-microvolt = <3100000>;
243			regulator-max-microvolt = <3108000>;
244			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245		};
246
247		vreg_l20a_2p95: ldo20 {
248			regulator-min-microvolt = <2960000>;
249			regulator-max-microvolt = <2960000>;
250			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251		};
252
253		vreg_l21a_2p95: ldo21 {
254		};
255
256		vreg_l22a_2p85: ldo22 {
257		};
258
259		vreg_l23a_3p3: ldo23 {
260			regulator-min-microvolt = <3300000>;
261			regulator-max-microvolt = <3312000>;
262			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263		};
264
265		vdda_qusb_hs0_3p1:
266		vreg_l24a_3p075: ldo24 {
267			regulator-min-microvolt = <3075000>;
268			regulator-max-microvolt = <3083000>;
269			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
270		};
271
272		vreg_l25a_3p3: ldo25 {
273			regulator-min-microvolt = <3104000>;
274			regulator-max-microvolt = <3112000>;
275			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276		};
277
278		vdda_hp_pcie_1p2:
279		vdda_hv_ebi0:
280		vdda_hv_ebi1:
281		vdda_hv_ebi2:
282		vdda_hv_ebi3:
283		vdda_mipi_csi_1p25:
284		vdda_mipi_dsi0_1p2:
285		vdda_mipi_dsi1_1p2:
286		vdda_pcie_1p2:
287		vdda_ufs1_1p2:
288		vdda_ufs2_1p2:
289		vdda_usb1_ss_1p2:
290		vdda_usb2_ss_1p2:
291		vreg_l26a_1p2: ldo26 {
292			regulator-min-microvolt = <1200000>;
293			regulator-max-microvolt = <1208000>;
294			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
295		};
296
297		vreg_l28a_3p0: ldo28 {
298		};
299
300		vreg_lvs1a_1p8: lvs1 {
301		};
302
303		vreg_lvs2a_1p8: lvs2 {
304		};
305	};
306};
307
308&cdsp_pas {
309	firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
310	status = "okay";
311};
312
313&dsi0 {
314	status = "okay";
315	vdda-supply = <&vreg_l26a_1p2>;
316
317	ports {
318		port@1 {
319			endpoint {
320				remote-endpoint = <&sn65dsi86_in_a>;
321				data-lanes = <0 1 2 3>;
322			};
323		};
324	};
325};
326
327&dsi0_phy {
328	status = "okay";
329	vdds-supply = <&vreg_l1a_0p875>;
330};
331
332&gcc {
333	protected-clocks = <GCC_QSPI_CORE_CLK>,
334			   <GCC_QSPI_CORE_CLK_SRC>,
335			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
336			   <GCC_LPASS_Q6_AXI_CLK>,
337			   <GCC_LPASS_SWAY_CLK>;
338};
339
340&gmu {
341	status = "okay";
342};
343
344&gpu {
345	status = "okay";
346	zap-shader {
347		memory-region = <&gpu_mem>;
348		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
349	};
350};
351
352&i2c1 {
353	status = "okay";
354	clock-frequency = <400000>;
355};
356
357&i2c3 {
358	status = "okay";
359	clock-frequency = <400000>;
360	/* Overwrite pinctrl-0 from sdm845.dtsi */
361	pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
362
363	tsel: hid@15 {
364		compatible = "hid-over-i2c";
365		reg = <0x15>;
366		hid-descr-addr = <0x1>;
367
368		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
369	};
370
371	tsc2: hid@2c {
372		compatible = "hid-over-i2c";
373		reg = <0x2c>;
374		hid-descr-addr = <0x20>;
375
376		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
377	};
378};
379
380&i2c5 {
381	status = "okay";
382	clock-frequency = <400000>;
383
384	tsc1: hid@10 {
385		compatible = "hid-over-i2c";
386		reg = <0x10>;
387		hid-descr-addr = <0x1>;
388
389		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
390
391		pinctrl-names = "default";
392		pinctrl-0 = <&i2c5_hid_active>;
393	};
394};
395
396&i2c10 {
397	status = "okay";
398	clock-frequency = <400000>;
399
400	sn65dsi86: bridge@2c {
401		compatible = "ti,sn65dsi86";
402		reg = <0x2c>;
403		pinctrl-names = "default";
404		pinctrl-0 = <&sn65dsi86_pin_active>;
405
406		enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
407
408		vpll-supply = <&vreg_l14a_1p88>;
409		vccio-supply = <&vreg_l14a_1p88>;
410
411		clocks = <&sn65dsi86_refclk>;
412		clock-names = "refclk";
413
414		no-hpd;
415		#pwm-cells = <1>;
416
417		ports {
418			#address-cells = <1>;
419			#size-cells = <0>;
420
421			port@0 {
422				reg = <0>;
423				sn65dsi86_in_a: endpoint {
424					remote-endpoint = <&dsi0_out>;
425				};
426			};
427
428			port@1 {
429				reg = <1>;
430				sn65dsi86_out: endpoint {
431					remote-endpoint = <&panel_in_edp>;
432				};
433			};
434		};
435
436		aux-bus {
437			panel: panel {
438				compatible = "boe,nv133fhm-n61";
439				backlight = <&backlight>;
440
441				port {
442					panel_in_edp: endpoint {
443						remote-endpoint = <&sn65dsi86_out>;
444					};
445				};
446			};
447		};
448	};
449};
450
451&i2c11 {
452	status = "okay";
453	clock-frequency = <400000>;
454
455	ecsh: hid@5c {
456		compatible = "hid-over-i2c";
457		reg = <0x5c>;
458		hid-descr-addr = <0x1>;
459
460		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
461
462		pinctrl-names = "default";
463		pinctrl-0 = <&i2c11_hid_active>;
464	};
465};
466
467&ipa {
468	status = "okay";
469	memory-region = <&ipa_fw_mem>;
470};
471
472&mdss {
473	status = "okay";
474};
475
476&mss_pil {
477	status = "okay";
478	firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
479};
480
481&qup_i2c10_default {
482	pinconf {
483		pins = "gpio55", "gpio56";
484		drive-strength = <2>;
485		bias-disable;
486	};
487};
488
489&qup_i2c12_default {
490	pinmux {
491		drive-strength = <2>;
492		bias-disable;
493	};
494};
495
496&qup_uart6_default {
497	pinmux {
498		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
499		 function = "qup6";
500	};
501
502	cts {
503		pins = "gpio45";
504		bias-pull-down;
505	};
506
507	rts-tx {
508		pins = "gpio46", "gpio47";
509		drive-strength = <2>;
510		bias-disable;
511	};
512
513	rx {
514		pins = "gpio48";
515		bias-pull-up;
516	};
517};
518
519&qupv3_id_0 {
520	status = "okay";
521};
522
523&qupv3_id_1 {
524	status = "okay";
525};
526
527&q6asmdai {
528	dai@0 {
529		reg = <0>;
530	};
531
532	dai@1 {
533		reg = <1>;
534	};
535
536	dai@2 {
537		reg = <2>;
538	};
539};
540
541&sound {
542	compatible = "qcom,db845c-sndcard";
543	model = "Lenovo-YOGA-C630-13Q50";
544
545	audio-routing =
546		"RX_BIAS", "MCLK",
547		"AMIC2", "MIC BIAS2",
548		"SpkrLeft IN", "SPK1 OUT",
549		"SpkrRight IN", "SPK2 OUT",
550		"MM_DL1",  "MultiMedia1 Playback",
551		"MM_DL3",  "MultiMedia3 Playback",
552		"MultiMedia2 Capture", "MM_UL2";
553
554	mm1-dai-link {
555		link-name = "MultiMedia1";
556		cpu {
557			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
558		};
559	};
560
561	mm2-dai-link {
562		link-name = "MultiMedia2";
563		cpu {
564			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
565		};
566	};
567
568	mm3-dai-link {
569		link-name = "MultiMedia3";
570		cpu {
571			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
572		};
573	};
574
575	slim-dai-link {
576		link-name = "SLIM Playback";
577		cpu {
578			sound-dai = <&q6afedai SLIMBUS_0_RX>;
579		};
580
581		platform {
582			sound-dai = <&q6routing>;
583		};
584
585		codec {
586			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
587		};
588	};
589
590	slimcap-dai-link {
591		link-name = "SLIM Capture";
592		cpu {
593			sound-dai = <&q6afedai SLIMBUS_0_TX>;
594		};
595
596		platform {
597			sound-dai = <&q6routing>;
598		};
599
600		codec {
601			sound-dai = <&wcd9340 1>;
602		};
603	};
604
605	slim-wcd-dai-link {
606		link-name = "SLIM WCD Playback";
607		cpu {
608			sound-dai = <&q6afedai SLIMBUS_1_RX>;
609		};
610
611		platform {
612			sound-dai = <&q6routing>;
613		};
614
615		codec {
616			sound-dai = <&wcd9340 2>;
617		};
618	};
619};
620
621&tlmm {
622	gpio-reserved-ranges = <0 4>, <81 4>;
623
624	sn65dsi86_pin_active: sn65dsi86-enable {
625		pins = "gpio96";
626		drive-strength = <2>;
627		bias-disable;
628	};
629
630	i2c3_hid_active: i2c2-hid-active {
631		pins = "gpio37";
632		function = "gpio";
633
634		input-enable;
635		bias-pull-up;
636		drive-strength = <2>;
637	};
638
639	i2c5_hid_active: i2c5-hid-active {
640		pins = "gpio125";
641		function = "gpio";
642
643		input-enable;
644		bias-pull-up;
645		drive-strength = <2>;
646	};
647
648	i2c11_hid_active: i2c11-hid-active {
649		pins = "gpio92";
650		function = "gpio";
651
652		input-enable;
653		bias-pull-up;
654		drive-strength = <2>;
655	};
656
657	wcd_intr_default: wcd_intr_default {
658		pins = "gpio54";
659		function = "gpio";
660
661		input-enable;
662		bias-pull-down;
663		drive-strength = <2>;
664	};
665
666	lid_pin_active: lid-pin {
667		pins = "gpio124";
668		function = "gpio";
669
670		input-enable;
671		bias-disable;
672	};
673
674	mode_pin_active: mode-pin {
675		pins = "gpio95";
676		function = "gpio";
677
678		input-enable;
679		bias-disable;
680	};
681};
682
683&uart6 {
684	status = "okay";
685
686	bluetooth {
687		compatible = "qcom,wcn3990-bt";
688
689		vddio-supply = <&vreg_s4a_1p8>;
690		vddxo-supply = <&vreg_l7a_1p8>;
691		vddrf-supply = <&vreg_l17a_1p3>;
692		vddch0-supply = <&vreg_l25a_3p3>;
693		vddch1-supply = <&vreg_l23a_3p3>;
694		max-speed = <3200000>;
695	};
696};
697
698&ufs_mem_hc {
699	status = "okay";
700
701	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
702
703	vcc-supply = <&vreg_l20a_2p95>;
704	vcc-max-microamp = <600000>;
705};
706
707&ufs_mem_phy {
708	status = "okay";
709
710	vdda-phy-supply = <&vdda_ufs1_core>;
711	vdda-pll-supply = <&vdda_ufs1_1p2>;
712};
713
714&usb_1 {
715	status = "okay";
716};
717
718&usb_1_dwc3 {
719	dr_mode = "host";
720};
721
722&usb_1_hsphy {
723	status = "okay";
724
725	vdd-supply = <&vdda_usb1_ss_core>;
726	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
727	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
728
729	qcom,imp-res-offset-value = <8>;
730	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
731	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
732	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
733};
734
735&usb_1_qmpphy {
736	status = "okay";
737
738	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
739	vdda-pll-supply = <&vdda_usb1_ss_core>;
740};
741
742&usb_2 {
743	status = "okay";
744};
745
746&usb_2_dwc3 {
747	dr_mode = "host";
748};
749
750&usb_2_hsphy {
751	status = "okay";
752
753	vdd-supply = <&vdda_usb2_ss_core>;
754	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
755	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
756
757	qcom,imp-res-offset-value = <8>;
758	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
759};
760
761&usb_2_qmpphy {
762	status = "okay";
763
764	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
765	vdda-pll-supply = <&vdda_usb2_ss_core>;
766};
767
768&venus {
769	status = "okay";
770};
771
772&wcd9340{
773	pinctrl-0 = <&wcd_intr_default>;
774	pinctrl-names = "default";
775	clock-names = "extclk";
776	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
777	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
778	vdd-buck-supply = <&vreg_s4a_1p8>;
779	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
780	vdd-tx-supply = <&vreg_s4a_1p8>;
781	vdd-rx-supply = <&vreg_s4a_1p8>;
782	vdd-io-supply = <&vreg_s4a_1p8>;
783	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
784	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
785	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
786
787	swm: swm@c85 {
788		left_spkr: speaker@0,3 {
789			compatible = "sdw10217211000";
790			reg = <0 3>;
791			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
792			#thermal-sensor-cells = <0>;
793			sound-name-prefix = "SpkrLeft";
794			#sound-dai-cells = <0>;
795		};
796
797		right_spkr: speaker@0,4 {
798			compatible = "sdw10217211000";
799			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
800			reg = <0 4>;
801			#thermal-sensor-cells = <0>;
802			sound-name-prefix = "SpkrRight";
803			#sound-dai-cells = <0>;
804		};
805	};
806};
807
808&wifi {
809	status = "okay";
810
811	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
812	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
813	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
814	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
815	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
816
817	qcom,snoc-host-cap-8bit-quirk;
818};
819
820&crypto {
821	/* FIXME: qce_start triggers an SError */
822	status = "disable";
823};
824