1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> 4 */ 5 6#include <dt-bindings/input/input.h> 7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include "sdm845.dtsi" 10#include "pm8005.dtsi" 11#include "pm8998.dtsi" 12#include "pmi8998.dtsi" 13 14/ { 15 qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ 16 qcom,board-id = <8 0>; 17 18 gpio-keys { 19 compatible = "gpio-keys"; 20 21 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>; 22 pinctrl-names = "default"; 23 24 key-camera-focus { 25 label = "Camera Focus"; 26 gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>; 27 linux,code = <KEY_CAMERA_FOCUS>; 28 debounce-interval = <15>; 29 linux,can-disable; 30 wakeup-source; 31 }; 32 33 key-camera-snapshot { 34 label = "Camera Snapshot"; 35 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; 36 linux,code = <KEY_CAMERA>; 37 debounce-interval = <15>; 38 linux,can-disable; 39 wakeup-source; 40 }; 41 42 key-volume-down { 43 label = "Volume Down"; 44 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; 45 linux,code = <KEY_VOLUMEDOWN>; 46 debounce-interval = <15>; 47 linux,can-disable; 48 wakeup-source; 49 }; 50 51 key-volume-up { 52 label = "Volume Up"; 53 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; 54 linux,code = <KEY_VOLUMEUP>; 55 debounce-interval = <15>; 56 linux,can-disable; 57 wakeup-source; 58 }; 59 }; 60 61 vph_pwr: vph-pwr-regulator { 62 compatible = "regulator-fixed"; 63 regulator-name = "vph_pwr"; 64 regulator-min-microvolt = <3700000>; 65 regulator-max-microvolt = <3700000>; 66 }; 67 68 vreg_s4a_1p8: pm8998-smps4 { 69 compatible = "regulator-fixed"; 70 regulator-name = "vreg_s4a_1p8"; 71 72 regulator-min-microvolt = <1800000>; 73 regulator-max-microvolt = <1800000>; 74 75 regulator-always-on; 76 regulator-boot-on; 77 78 vin-supply = <&vph_pwr>; 79 }; 80 81 reserved-memory { 82 /* SONY was cool and didn't diverge from MTP this time, yay! */ 83 cont_splash_mem: memory@9d400000 { 84 reg = <0x0 0x9d400000 0x0 0x2400000>; 85 no-map; 86 }; 87 88 ramoops@ffc00000 { 89 compatible = "ramoops"; 90 reg = <0x0 0xffc00000 0x0 0x100000>; 91 record-size = <0x10000>; 92 console-size = <0x60000>; 93 ftrace-size = <0x10000>; 94 pmsg-size = <0x20000>; 95 ecc-size = <16>; 96 no-map; 97 }; 98 }; 99}; 100 101&apps_rsc { 102 regulators-0 { 103 compatible = "qcom,pm8998-rpmh-regulators"; 104 qcom,pmic-id = "a"; 105 106 vdd-s1-supply = <&vph_pwr>; 107 vdd-s2-supply = <&vph_pwr>; 108 vdd-s3-supply = <&vph_pwr>; 109 vdd-s4-supply = <&vph_pwr>; 110 vdd-s5-supply = <&vph_pwr>; 111 vdd-s6-supply = <&vph_pwr>; 112 vdd-s7-supply = <&vph_pwr>; 113 vdd-s8-supply = <&vph_pwr>; 114 vdd-s9-supply = <&vph_pwr>; 115 vdd-s10-supply = <&vph_pwr>; 116 vdd-s11-supply = <&vph_pwr>; 117 vdd-s12-supply = <&vph_pwr>; 118 vdd-s13-supply = <&vph_pwr>; 119 vdd-l1-l27-supply = <&vreg_s7a_0p9>; 120 vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; 121 vdd-l3-l11-supply = <&vreg_s7a_0p9>; 122 vdd-l4-l5-supply = <&vreg_s7a_0p9>; 123 vdd-l6-supply = <&vph_pwr>; 124 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; 125 vdd-l9-supply = <&vreg_s5a_1p9>; 126 vdd-l10-l23-l25-supply = <&src_vreg_bob>; 127 vdd-l13-l19-l21-supply = <&src_vreg_bob>; 128 vdd-l16-l28-supply = <&src_vreg_bob>; 129 vdd-l18-l22-supply = <&src_vreg_bob>; 130 vdd-l20-l24-supply = <&src_vreg_bob>; 131 vdd-l26-supply = <&vreg_s3a_1p3>; 132 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 133 134 vreg_s2a_1p1: smps2 { 135 regulator-min-microvolt = <1100000>; 136 regulator-max-microvolt = <1100000>; 137 }; 138 139 vreg_s3a_1p3: smps3 { 140 regulator-min-microvolt = <1352000>; 141 regulator-max-microvolt = <1352000>; 142 }; 143 144 vreg_s5a_1p9: smps5 { 145 regulator-min-microvolt = <1904000>; 146 regulator-max-microvolt = <2040000>; 147 }; 148 149 vreg_s7a_0p9: smps7 { 150 regulator-min-microvolt = <900000>; 151 regulator-max-microvolt = <1028000>; 152 }; 153 154 vreg_l1a_0p9: ldo1 { 155 regulator-min-microvolt = <880000>; 156 regulator-max-microvolt = <880000>; 157 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 158 }; 159 160 vreg_l2a_1p2: ldo2 { 161 regulator-min-microvolt = <1200000>; 162 regulator-max-microvolt = <1200000>; 163 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 164 regulator-always-on; 165 }; 166 167 vreg_l3a_1p0: ldo3 { 168 regulator-min-microvolt = <1000000>; 169 regulator-max-microvolt = <1000000>; 170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 171 }; 172 173 vreg_l5a_0p8: ldo5 { 174 regulator-min-microvolt = <800000>; 175 regulator-max-microvolt = <800000>; 176 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 177 }; 178 179 vreg_l6a_1p8: ldo6 { 180 regulator-min-microvolt = <1856000>; 181 regulator-max-microvolt = <1856000>; 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 183 }; 184 185 vreg_l7a_1p8: ldo7 { 186 regulator-min-microvolt = <1800000>; 187 regulator-max-microvolt = <1800000>; 188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 189 }; 190 191 vreg_l8a_1p2: ldo8 { 192 regulator-min-microvolt = <1200000>; 193 regulator-max-microvolt = <1248000>; 194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 195 }; 196 197 vreg_l9a_1p7: ldo9 { 198 regulator-min-microvolt = <1704000>; 199 regulator-max-microvolt = <2928000>; 200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 201 }; 202 203 vreg_l10a_1p7: ldo10 { 204 regulator-min-microvolt = <1704000>; 205 regulator-max-microvolt = <2928000>; 206 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 207 }; 208 209 vreg_l11a_1p0: ldo11 { 210 regulator-min-microvolt = <1000000>; 211 regulator-max-microvolt = <1048000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 }; 214 215 vreg_l12a_1p8: ldo12 { 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 219 }; 220 221 vreg_l13a_1p8: ldo13 { 222 regulator-min-microvolt = <1800000>; 223 regulator-max-microvolt = <2960000>; 224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 225 }; 226 227 vreg_l14a_1p8: ldo14 { 228 regulator-min-microvolt = <1800000>; 229 regulator-max-microvolt = <1800000>; 230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 231 }; 232 233 vreg_l15a_1p8: ldo15 { 234 regulator-min-microvolt = <1800000>; 235 regulator-max-microvolt = <1800000>; 236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 237 }; 238 239 vreg_l16a_2p7: ldo16 { 240 regulator-min-microvolt = <2704000>; 241 regulator-max-microvolt = <2704000>; 242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 243 }; 244 245 vreg_l17a_1p3: ldo17 { 246 regulator-min-microvolt = <1304000>; 247 regulator-max-microvolt = <1304000>; 248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 249 }; 250 251 vreg_l18a_2p7: ldo18 { 252 regulator-min-microvolt = <2704000>; 253 regulator-max-microvolt = <2960000>; 254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 255 }; 256 257 vreg_l19a_2p7: ldo19 { 258 regulator-min-microvolt = <2700000>; 259 regulator-max-microvolt = <2700000>; 260 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 261 262 /* 263 * The driver *really* doesn't want this regualtor to exist, 264 * saying that it could not get the current voltage (-ENOTRECOVERABLE) 265 * even though it surely is used on these devices (as a voltage 266 * source for camera autofocus) 267 */ 268 status = "disabled"; 269 }; 270 271 vreg_l20a_2p7: ldo20 { 272 regulator-min-microvolt = <2704000>; 273 regulator-max-microvolt = <2960000>; 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 275 }; 276 277 vreg_l21a_2p7: ldo21 { 278 regulator-min-microvolt = <2704000>; 279 regulator-max-microvolt = <2960000>; 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 281 }; 282 283 vreg_l22a_2p8: ldo22 { 284 regulator-min-microvolt = <2800000>; 285 regulator-max-microvolt = <2800000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_l23a_3p0: ldo23 { 290 regulator-min-microvolt = <3000000>; 291 regulator-max-microvolt = <3312000>; 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 293 }; 294 295 vreg_l24a_3p1: ldo24 { 296 regulator-min-microvolt = <3088000>; 297 regulator-max-microvolt = <3088000>; 298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 299 }; 300 301 vreg_l25a_3p0: ldo25 { 302 regulator-min-microvolt = <3000000>; 303 regulator-max-microvolt = <3312000>; 304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 305 }; 306 307 vreg_l26a_1p2: ldo26 { 308 regulator-min-microvolt = <1200000>; 309 regulator-max-microvolt = <1200000>; 310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 311 }; 312 313 vreg_l28a_2p8: ldo28 { 314 regulator-min-microvolt = <2856000>; 315 regulator-max-microvolt = <3008000>; 316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 317 }; 318 319 vreg_lvs1a_1p8: lvs1 { 320 regulator-min-microvolt = <1800000>; 321 regulator-max-microvolt = <1800000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vreg_lvs2a_1p8: lvs2 { 326 regulator-min-microvolt = <1800000>; 327 regulator-max-microvolt = <1800000>; 328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 329 }; 330 }; 331 332 regulators-1 { 333 compatible = "qcom,pmi8998-rpmh-regulators"; 334 qcom,pmic-id = "b"; 335 336 src_vreg_bob: bob { 337 regulator-min-microvolt = <3312000>; 338 regulator-max-microvolt = <3600000>; 339 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 340 }; 341 }; 342 343 regulators-2 { 344 compatible = "qcom,pm8005-rpmh-regulators"; 345 qcom,pmic-id = "c"; 346 347 vdd-s1-supply = <&vph_pwr>; 348 vdd-s2-supply = <&vph_pwr>; 349 vdd-s3-supply = <&vph_pwr>; 350 vdd-s4-supply = <&vph_pwr>; 351 352 vreg_s3c_0p6: smps3 { 353 regulator-min-microvolt = <600000>; 354 regulator-max-microvolt = <600000>; 355 }; 356 }; 357}; 358 359&gcc { 360 protected-clocks = <GCC_QSPI_CORE_CLK>, 361 <GCC_QSPI_CORE_CLK_SRC>, 362 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 363 <GCC_LPASS_Q6_AXI_CLK>, 364 <GCC_LPASS_SWAY_CLK>; 365}; 366 367&i2c5 { 368 status = "okay"; 369 clock-frequency = <400000>; 370 371 /* Synaptics touchscreen @ 2c, 3c */ 372}; 373 374&i2c10 { 375 status = "okay"; 376 clock-frequency = <400000>; 377 378 /* Qcom SMB1355 @ 8, c */ 379 /* NXP PN547 NFC @ 28 */ 380 /* Renesas IDTP9221 Qi charger @ 61 */ 381}; 382 383&i2c14 { 384 status = "okay"; 385 clock-frequency = <400000>; 386 387 /* SONY ToF sensor @ 52 */ 388 /* AMS TCS3490 RGB+IR color sensor @ 72 */ 389}; 390 391&pm8998_gpios { 392 focus_n: focus-n-state { 393 pins = "gpio2"; 394 function = PMIC_GPIO_FUNC_NORMAL; 395 power-source = <0>; 396 bias-pull-up; 397 input-enable; 398 }; 399 400 vol_down_n: vol-down-n-state { 401 pins = "gpio5"; 402 function = PMIC_GPIO_FUNC_NORMAL; 403 power-source = <0>; 404 bias-pull-up; 405 input-enable; 406 }; 407 408 vol_up_n: vol-up-n-state { 409 pins = "gpio6"; 410 function = PMIC_GPIO_FUNC_NORMAL; 411 power-source = <0>; 412 bias-pull-up; 413 input-enable; 414 }; 415 416 snapshot_n: snapshot-n-state { 417 pins = "gpio7"; 418 function = PMIC_GPIO_FUNC_NORMAL; 419 power-source = <0>; 420 bias-pull-up; 421 input-enable; 422 }; 423}; 424 425&qupv3_id_0 { 426 status = "okay"; 427}; 428 429&qupv3_id_1 { 430 status = "okay"; 431}; 432 433&sdhc_2 { 434 status = "okay"; 435 436 vmmc-supply = <&vreg_l21a_2p7>; 437 vqmmc-supply = <&vreg_l13a_1p8>; 438 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; 439 pinctrl-0 = <&sdc2_default_state>; 440 pinctrl-names = "default"; 441 bus-width = <4>; 442 no-sdio; 443 no-mmc; 444}; 445 446&tlmm { 447 gpio-reserved-ranges = <0 4>, <81 4>; 448 449 sdc2_default_state: sdc2-default-state { 450 clk-pins { 451 pins = "sdc2_clk"; 452 drive-strength = <16>; 453 bias-disable; 454 }; 455 456 cmd-pins { 457 pins = "sdc2_cmd"; 458 drive-strength = <10>; 459 bias-pull-up; 460 }; 461 462 data-pins { 463 pins = "sdc2_data"; 464 drive-strength = <10>; 465 bias-pull-up; 466 }; 467 }; 468}; 469 470&uart6 { 471 status = "okay"; 472}; 473 474&uart9 { 475 status = "okay"; 476}; 477 478/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ 479&ufs_mem_hc { status = "disabled"; }; 480&ufs_mem_phy { status = "disabled"; }; 481 482&usb_1 { 483 status = "okay"; 484 485 qcom,select-utmi-as-pipe-clk; 486}; 487 488&usb_1_dwc3 { 489 dr_mode = "peripheral"; 490 491 maximum-speed = "high-speed"; 492 phys = <&usb_1_hsphy>; 493 phy-names = "usb2-phy"; 494}; 495 496&usb_1_hsphy { 497 status = "okay"; 498 499 vdd-supply = <&vreg_l1a_0p9>; 500 vdda-pll-supply = <&vreg_l12a_1p8>; 501 vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; 502}; 503