1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com> 4 * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech> 5 * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be> 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/leds/common.h> 12#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 13#include "sdm845.dtsi" 14#include "pm8998.dtsi" 15#include "pmi8998.dtsi" 16 17/ { 18 model = "SHIFT SHIFT6mq"; 19 compatible = "shift,axolotl", "qcom,sdm845"; 20 qcom,msm-id = <321 0x20001>; 21 qcom,board-id = <11 0>; 22 23 aliases { 24 display0 = &framebuffer0; 25 serial0 = &uart9; 26 }; 27 28 chosen { 29 #address-cells = <2>; 30 #size-cells = <2>; 31 ranges; 32 33 stdout-path = "serial0"; 34 35 /* Use framebuffer setup by the bootloader. */ 36 framebuffer0: framebuffer@9d400000 { 37 compatible = "simple-framebuffer"; 38 reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; 39 width = <1080>; 40 height = <2160>; 41 stride = <(1080 * 4)>; 42 format = "a8r8g8b8"; 43 }; 44 }; 45 46 gpio-keys { 47 compatible = "gpio-keys"; 48 autorepeat; 49 50 pinctrl-names = "default"; 51 pinctrl-0 = <&volume_up_gpio>; 52 53 key-vol-up { 54 label = "volume_up"; 55 linux,code = <KEY_VOLUMEUP>; 56 gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; 57 debounce-interval = <15>; 58 }; 59 }; 60 61 reserved-memory { 62 framebuffer_region@9d400000 { 63 reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; 64 no-map; 65 }; 66 67 ramoops: ramoops@b0000000 { 68 compatible = "ramoops"; 69 reg = <0 0xb0000000 0 0x00400000>; 70 record-size = <0x40000>; 71 console-size = <0x40000>; 72 ftrace-size = <0x40000>; 73 pmsg-size = <0x200000>; 74 ecc-size = <0x0>; 75 }; 76 }; 77 78 battery: battery { 79 compatible = "simple-battery"; 80 81 charge-full-design-microamp-hours = <3850000>; 82 voltage-min-design-microvolt = <3600000>; 83 voltage-max-design-microvolt = <4400000>; 84 }; 85 86 vph_pwr: vph-pwr-regulator { 87 compatible = "regulator-fixed"; 88 regulator-name = "vph_pwr"; 89 regulator-min-microvolt = <3700000>; 90 regulator-max-microvolt = <3700000>; 91 }; 92 93 vreg_s4a_1p8: pm8998-smps4 { 94 compatible = "regulator-fixed"; 95 regulator-name = "vreg_s4a_1p8"; 96 97 regulator-min-microvolt = <1800000>; 98 regulator-max-microvolt = <1800000>; 99 100 regulator-always-on; 101 regulator-boot-on; 102 103 vin-supply = <&vph_pwr>; 104 }; 105}; 106 107&adsp_pas { 108 status = "okay"; 109 firmware-name = "qcom/sdm845/axolotl/adsp.mbn"; 110}; 111 112&apps_rsc { 113 pm8998-rpmh-regulators { 114 compatible = "qcom,pm8998-rpmh-regulators"; 115 qcom,pmic-id = "a"; 116 117 vdd-s1-supply = <&vph_pwr>; 118 vdd-s2-supply = <&vph_pwr>; 119 vdd-s3-supply = <&vph_pwr>; 120 vdd-s4-supply = <&vph_pwr>; 121 vdd-s5-supply = <&vph_pwr>; 122 vdd-s6-supply = <&vph_pwr>; 123 vdd-s7-supply = <&vph_pwr>; 124 vdd-s8-supply = <&vph_pwr>; 125 vdd-s9-supply = <&vph_pwr>; 126 vdd-s10-supply = <&vph_pwr>; 127 vdd-s11-supply = <&vph_pwr>; 128 vdd-s12-supply = <&vph_pwr>; 129 vdd-s13-supply = <&vph_pwr>; 130 vdd-l1-l27-supply = <&vreg_s7a_1p025>; 131 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 132 vdd-l3-l11-supply = <&vreg_s7a_1p025>; 133 vdd-l4-l5-supply = <&vreg_s7a_1p025>; 134 vdd-l6-supply = <&vph_pwr>; 135 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 136 vdd-l9-supply = <&vreg_bob>; 137 vdd-l10-l23-l25-supply = <&vreg_bob>; 138 vdd-l13-l19-l21-supply = <&vreg_bob>; 139 vdd-l16-l28-supply = <&vreg_bob>; 140 vdd-l18-l22-supply = <&vreg_bob>; 141 vdd-l20-l24-supply = <&vreg_bob>; 142 vdd-l26-supply = <&vreg_s3a_1p35>; 143 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 144 145 vreg_s2a_1p125: smps2 { 146 regulator-min-microvolt = <1100000>; 147 regulator-max-microvolt = <1100000>; 148 }; 149 150 vreg_s3a_1p35: smps3 { 151 regulator-min-microvolt = <1352000>; 152 regulator-max-microvolt = <1352000>; 153 }; 154 155 vreg_s5a_2p04: smps5 { 156 regulator-min-microvolt = <1904000>; 157 regulator-max-microvolt = <2040000>; 158 }; 159 160 vreg_s7a_1p025: smps7 { 161 regulator-min-microvolt = <900000>; 162 regulator-max-microvolt = <1028000>; 163 }; 164 165 vdd_qusb_hs0: 166 vdda_hp_pcie_core: 167 vdda_mipi_csi0_0p9: 168 vdda_mipi_csi1_0p9: 169 vdda_mipi_csi2_0p9: 170 vdda_mipi_dsi0_pll: 171 vdda_mipi_dsi1_pll: 172 vdda_qlink_lv: 173 vdda_qlink_lv_ck: 174 vdda_qrefs_0p875: 175 vdda_pcie_core: 176 vdda_pll_cc_ebi01: 177 vdda_pll_cc_ebi23: 178 vdda_sp_sensor: 179 vdda_ufs1_core: 180 vdda_ufs2_core: 181 vdda_usb1_ss_core: 182 vdda_usb2_ss_core: 183 vreg_l1a_0p875: ldo1 { 184 regulator-min-microvolt = <880000>; 185 regulator-max-microvolt = <880000>; 186 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 187 }; 188 189 vddpx_10: 190 vreg_l2a_1p2: ldo2 { 191 regulator-min-microvolt = <1200000>; 192 regulator-max-microvolt = <1200000>; 193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 194 regulator-always-on; 195 }; 196 197 vreg_l3a_1p0: ldo3 { 198 regulator-min-microvolt = <1000000>; 199 regulator-max-microvolt = <1000000>; 200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 201 }; 202 203 vdd_wcss_cx: 204 vdd_wcss_mx: 205 vdda_wcss_pll: 206 vreg_l5a_0p8: ldo5 { 207 regulator-min-microvolt = <800000>; 208 regulator-max-microvolt = <800000>; 209 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 210 }; 211 212 vddpx_13: 213 vreg_l6a_1p8: ldo6 { 214 regulator-min-microvolt = <1856000>; 215 regulator-max-microvolt = <1856000>; 216 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 217 }; 218 219 vreg_l7a_1p8: ldo7 { 220 regulator-min-microvolt = <1800000>; 221 regulator-max-microvolt = <1800000>; 222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 223 }; 224 225 vreg_l8a_1p2: ldo8 { 226 regulator-min-microvolt = <1200000>; 227 regulator-max-microvolt = <1248000>; 228 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 229 }; 230 231 vreg_l9a_1p8: ldo9 { 232 regulator-min-microvolt = <1704000>; 233 regulator-max-microvolt = <2928000>; 234 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 235 }; 236 237 vreg_l10a_1p8: ldo10 { 238 regulator-min-microvolt = <1704000>; 239 regulator-max-microvolt = <2928000>; 240 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 241 }; 242 243 vreg_l11a_1p0: ldo11 { 244 regulator-min-microvolt = <1000000>; 245 regulator-max-microvolt = <1048000>; 246 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 247 }; 248 249 vdd_qfprom: 250 vdd_qfprom_sp: 251 vdda_apc1_cs_1p8: 252 vdda_gfx_cs_1p8: 253 vdda_qrefs_1p8: 254 vdda_qusb_hs0_1p8: 255 vddpx_11: 256 vreg_l12a_1p8: ldo12 { 257 regulator-min-microvolt = <1800000>; 258 regulator-max-microvolt = <1800000>; 259 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 260 }; 261 262 vddpx_2: 263 vreg_l13a_2p95: ldo13 { 264 regulator-min-microvolt = <1800000>; 265 regulator-max-microvolt = <2960000>; 266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 267 }; 268 269 vreg_l14a_1p88: ldo14 { 270 regulator-min-microvolt = <1800000>; 271 regulator-max-microvolt = <1800000>; 272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 273 }; 274 275 vreg_l15a_1p8: ldo15 { 276 regulator-min-microvolt = <1800000>; 277 regulator-max-microvolt = <1800000>; 278 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 279 }; 280 281 vreg_l16a_2p7: ldo16 { 282 regulator-min-microvolt = <2704000>; 283 regulator-max-microvolt = <2704000>; 284 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 285 }; 286 287 vreg_l17a_1p3: ldo17 { 288 regulator-min-microvolt = <1304000>; 289 regulator-max-microvolt = <1304000>; 290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 291 }; 292 293 vreg_l18a_2p7: ldo18 { 294 regulator-min-microvolt = <2704000>; 295 regulator-max-microvolt = <2960000>; 296 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 297 }; 298 299 vreg_l19a_3p0: ldo19 { 300 regulator-min-microvolt = <2856000>; 301 regulator-max-microvolt = <3104000>; 302 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 303 }; 304 305 vreg_l20a_2p95: ldo20 { 306 regulator-min-microvolt = <2704000>; 307 regulator-max-microvolt = <2960000>; 308 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 309 }; 310 311 vreg_l21a_2p95: ldo21 { 312 regulator-min-microvolt = <2704000>; 313 regulator-max-microvolt = <2960000>; 314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 315 }; 316 317 vreg_l22a_2p85: ldo22 { 318 regulator-min-microvolt = <2864000>; 319 regulator-max-microvolt = <3312000>; 320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 321 }; 322 323 vreg_l23a_3p3: ldo23 { 324 regulator-min-microvolt = <3000000>; 325 regulator-max-microvolt = <3312000>; 326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 327 }; 328 329 vdda_qusb_hs0_3p1: 330 vreg_l24a_3p075: ldo24 { 331 regulator-min-microvolt = <3088000>; 332 regulator-max-microvolt = <3088000>; 333 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 334 }; 335 336 vreg_l25a_3p3: ldo25 { 337 regulator-min-microvolt = <3300000>; 338 regulator-max-microvolt = <3312000>; 339 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 340 }; 341 342 vdda_hp_pcie_1p2: 343 vdda_hv_ebi0: 344 vdda_hv_ebi1: 345 vdda_hv_ebi2: 346 vdda_hv_ebi3: 347 vdda_mipi_csi_1p25: 348 vdda_mipi_dsi0_1p2: 349 vdda_mipi_dsi1_1p2: 350 vdda_pcie_1p2: 351 vdda_ufs1_1p2: 352 vdda_ufs2_1p2: 353 vdda_usb1_ss_1p2: 354 vdda_usb2_ss_1p2: 355 vreg_l26a_1p2: ldo26 { 356 regulator-min-microvolt = <1200000>; 357 regulator-max-microvolt = <1200000>; 358 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 359 }; 360 361 vreg_l28a_3p0: ldo28 { 362 regulator-min-microvolt = <2856000>; 363 regulator-max-microvolt = <3008000>; 364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 365 }; 366 367 vreg_lvs1a_1p8: lvs1 { 368 regulator-min-microvolt = <1800000>; 369 regulator-max-microvolt = <1800000>; 370 }; 371 372 vreg_lvs2a_1p8: lvs2 { 373 regulator-min-microvolt = <1800000>; 374 regulator-max-microvolt = <1800000>; 375 }; 376 }; 377 378 pmi8998-rpmh-regulators { 379 compatible = "qcom,pmi8998-rpmh-regulators"; 380 qcom,pmic-id = "b"; 381 382 vdd-bob-supply = <&vph_pwr>; 383 384 vreg_bob: bob { 385 regulator-min-microvolt = <3312000>; 386 regulator-max-microvolt = <3600000>; 387 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 388 regulator-allow-bypass; 389 }; 390 }; 391 392 pm8005-rpmh-regulators { 393 compatible = "qcom,pm8005-rpmh-regulators"; 394 qcom,pmic-id = "c"; 395 396 vdd-s1-supply = <&vph_pwr>; 397 vdd-s2-supply = <&vph_pwr>; 398 vdd-s3-supply = <&vph_pwr>; 399 vdd-s4-supply = <&vph_pwr>; 400 401 vreg_s3c_0p6: smps3 { 402 regulator-min-microvolt = <600000>; 403 regulator-max-microvolt = <600000>; 404 }; 405 }; 406}; 407 408&cdsp_pas { 409 status = "okay"; 410 firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; 411}; 412 413&dsi0 { 414 status = "okay"; 415 vdda-supply = <&vdda_mipi_dsi0_1p2>; 416 417 panel@0 { 418 compatible = "visionox,rm69299-shift"; 419 status = "okay"; 420 reg = <0>; 421 vdda-supply = <&vreg_l14a_1p88>; 422 vdd3p3-supply = <&vreg_l28a_3p0>; 423 424 #address-cells = <1>; 425 #size-cells = <0>; 426 427 reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; 428 429 pinctrl-names = "default", "sleep"; 430 pinctrl-0 = <&sde_dsi_active &sde_te_active>; 431 pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; 432 433 port { 434 panel_in_0: endpoint { 435 remote-endpoint = <&dsi0_out>; 436 }; 437 }; 438 }; 439}; 440 441&dsi0_out { 442 remote-endpoint = <&panel_in_0>; 443 data-lanes = <0 1 2 3>; 444}; 445 446&dsi0_phy { 447 status = "okay"; 448 vdds-supply = <&vdda_mipi_dsi0_pll>; 449}; 450 451&gcc { 452 protected-clocks = <GCC_QSPI_CORE_CLK>, 453 <GCC_QSPI_CORE_CLK_SRC>, 454 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 455 <GCC_LPASS_Q6_AXI_CLK>, 456 <GCC_LPASS_SWAY_CLK>; 457}; 458 459&gmu { 460 status = "okay"; 461}; 462 463&gpu { 464 status = "okay"; 465 466 zap-shader { 467 memory-region = <&gpu_mem>; 468 firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; 469 }; 470}; 471 472&i2c5 { 473 status = "okay"; 474 475 touchscreen@38 { 476 compatible = "focaltech,fts8719"; 477 reg = <0x38>; 478 wakeup-source; 479 interrupt-parent = <&tlmm>; 480 interrupts = <125 0x2>; 481 vdd-supply = <&vreg_l28a_3p0>; 482 vcc-i2c-supply = <&vreg_l14a_1p88>; 483 484 pinctrl-names = "default", "suspend"; 485 pinctrl-0 = <&ts_int_active &ts_reset_active>; 486 pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; 487 488 reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; 489 irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; 490 touchscreen-size-x = <1080>; 491 touchscreen-size-y = <2160>; 492 focaltech,max-touch-number = <5>; 493 }; 494}; 495 496&ipa { 497 status = "okay"; 498 499 memory-region = <&ipa_fw_mem>; 500 firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; 501}; 502 503&mdss { 504 status = "okay"; 505}; 506 507&mss_pil { 508 status = "okay"; 509 firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; 510}; 511 512&pm8998_gpio { 513 volume_up_gpio: pm8998-gpio6-state { 514 pinconf { 515 pins = "gpio6"; 516 function = "normal"; 517 input-enable; 518 bias-pull-up; 519 qcom,drive-strength = <0>; 520 }; 521 }; 522}; 523 524&pm8998_pon { 525 volume_down_resin: resin { 526 compatible = "qcom,pm8941-resin"; 527 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; 528 debounce = <15625>; 529 bias-pull-up; 530 linux,code = <KEY_VOLUMEDOWN>; 531 }; 532}; 533 534&pmi8998_lpg { 535 status = "okay"; 536 537 multi-led { 538 color = <LED_COLOR_ID_RGB>; 539 function = LED_FUNCTION_STATUS; 540 541 #address-cells = <1>; 542 #size-cells = <0>; 543 544 led@3 { 545 reg = <3>; 546 color = <LED_COLOR_ID_BLUE>; 547 }; 548 549 led@4 { 550 reg = <4>; 551 color = <LED_COLOR_ID_GREEN>; 552 }; 553 554 led@5 { 555 reg = <5>; 556 color = <LED_COLOR_ID_RED>; 557 }; 558 }; 559}; 560 561&qup_uart9_default { 562 pinconf-rx { 563 pins = "gpio5"; 564 drive-strength = <2>; 565 bias-pull-up; 566 }; 567 568 pinconf-tx { 569 pins = "gpio4"; 570 drive-strength = <2>; 571 bias-disable; 572 }; 573}; 574 575&qupv3_id_0 { 576 status = "okay"; 577}; 578 579&qupv3_id_1 { 580 status = "okay"; 581}; 582 583&tlmm { 584 gpio-reserved-ranges = <0 4>, <81 4>; 585 586 sde_dsi_active: sde-dsi-active { 587 mux { 588 pins = "gpio6", "gpio11"; 589 function = "gpio"; 590 }; 591 592 config { 593 pins = "gpio6", "gpio11"; 594 drive-strength = <8>; 595 bias-disable; 596 }; 597 }; 598 599 sde_dsi_suspend: sde-dsi-suspend { 600 mux { 601 pins = "gpio6", "gpio11"; 602 function = "gpio"; 603 }; 604 605 config { 606 pins = "gpio6", "gpio11"; 607 drive-strength = <2>; 608 bias-pull-down; 609 }; 610 }; 611 612 sde_te_active: sde-te-active { 613 mux { 614 pins = "gpio10"; 615 function = "mdp_vsync"; 616 }; 617 618 config { 619 pins = "gpio10"; 620 drive-strength = <2>; 621 bias-pull-down; 622 }; 623 }; 624 625 sde_te_suspend: sde-te-suspend { 626 mux { 627 pins = "gpio10"; 628 function = "mdp_vsync"; 629 }; 630 631 config { 632 pins = "gpio10"; 633 drive-strength = <2>; 634 bias-pull-down; 635 }; 636 }; 637 638 ts_int_active: ts-int-active { 639 mux { 640 pins = "gpio125"; 641 function = "gpio"; 642 }; 643 644 config { 645 pins = "gpio125"; 646 drive-strength = <8>; 647 bias-pull-up; 648 input-enable; 649 }; 650 }; 651 652 ts_int_suspend: ts-int-suspend { 653 mux { 654 pins = "gpio125"; 655 function = "gpio"; 656 }; 657 658 config { 659 pins = "gpio125"; 660 drive-strength = <2>; 661 bias-pull-down; 662 input-enable; 663 }; 664 }; 665 666 ts_reset_active: ts-reset-active { 667 mux { 668 pins = "gpio99"; 669 function = "gpio"; 670 }; 671 672 config { 673 pins = "gpio99"; 674 drive-strength = <8>; 675 bias-pull-up; 676 }; 677 }; 678 679 ts_reset_suspend: ts-reset-suspend { 680 mux { 681 pins = "gpio99"; 682 function = "gpio"; 683 }; 684 685 config { 686 pins = "gpio99"; 687 drive-strength = <2>; 688 bias-pull-down; 689 }; 690 }; 691}; 692 693&uart6 { 694 status = "okay"; 695 696 bluetooth { 697 compatible = "qcom,wcn3990-bt"; 698 699 vddio-supply = <&vreg_s4a_1p8>; 700 vddxo-supply = <&vreg_l7a_1p8>; 701 vddrf-supply = <&vreg_l17a_1p3>; 702 vddch0-supply = <&vreg_l25a_3p3>; 703 max-speed = <3200000>; 704 }; 705}; 706 707&uart9 { 708 status = "okay"; 709}; 710 711&ufs_mem_hc { 712 status = "okay"; 713 714 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; 715 716 vcc-supply = <&vreg_l20a_2p95>; 717 vcc-max-microamp = <600000>; 718}; 719 720&ufs_mem_phy { 721 status = "okay"; 722 723 vdda-phy-supply = <&vdda_ufs1_core>; 724 vdda-pll-supply = <&vdda_ufs1_1p2>; 725}; 726 727&usb_1 { 728 status = "okay"; 729}; 730 731&usb_1_dwc3 { 732 dr_mode = "peripheral"; 733}; 734 735&usb_1_hsphy { 736 status = "okay"; 737 738 vdd-supply = <&vreg_l1a_0p875>; 739 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 740 vdda-pll-supply = <&vreg_l12a_1p8>; 741}; 742 743&usb_1_qmpphy { 744 status = "okay"; 745 746 vdda-phy-supply = <&vreg_l26a_1p2>; 747 vdda-pll-supply = <&vreg_l1a_0p875>; 748}; 749 750&venus { 751 status = "okay"; 752 firmware-name = "qcom/sdm845/axolotl/venus.mbn"; 753}; 754 755&wifi { 756 status = "okay"; 757 758 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 759 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 760 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 761 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 762 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 763 764 qcom,snoc-host-cap-8bit-quirk; 765}; 766