1// SPDX-License-Identifier: GPL-2.0 2/* 3 * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source 4 * 5 * Copyright (c) 2020, The Linux Foundation. All rights reserved. 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/input/linux-event-codes.h> 11#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 12#include <dt-bindings/sound/qcom,q6afe.h> 13#include <dt-bindings/sound/qcom,q6asm.h> 14 15#include "sdm845.dtsi" 16#include "sdm845-wcd9340.dtsi" 17#include "pm8998.dtsi" 18#include "pmi8998.dtsi" 19 20/delete-node/ &rmtfs_mem; 21 22/ { 23 aliases { 24 serial0 = &uart9; 25 serial1 = &uart6; 26 }; 27 28 chosen { 29 stdout-path = "serial0:115200n8"; 30 }; 31 32 gpio-hall-sensor { 33 compatible = "gpio-keys"; 34 label = "Hall effect sensor"; 35 36 pinctrl-0 = <&hall_sensor_default>; 37 pinctrl-names = "default"; 38 39 event-hall-sensor { 40 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; 41 label = "Hall Effect Sensor"; 42 linux,input-type = <EV_SW>; 43 linux,code = <SW_LID>; 44 linux,can-disable; 45 wakeup-source; 46 }; 47 }; 48 49 gpio-keys { 50 compatible = "gpio-keys"; 51 label = "Volume keys"; 52 autorepeat; 53 54 pinctrl-names = "default"; 55 pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; 56 57 key-vol-down { 58 label = "Volume down"; 59 linux,code = <KEY_VOLUMEDOWN>; 60 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; 61 debounce-interval = <15>; 62 }; 63 64 key-vol-up { 65 label = "Volume up"; 66 linux,code = <KEY_VOLUMEUP>; 67 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; 68 debounce-interval = <15>; 69 }; 70 }; 71 72 reserved-memory { 73 /* 74 * The rmtfs_mem needs to be guarded due to "XPU limitations" 75 * it is otherwise possible for an allocation adjacent to the 76 * rmtfs_mem region to trigger an XPU violation, causing a crash. 77 */ 78 rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { 79 no-map; 80 reg = <0 0xf5b00000 0 0x1000>; 81 }; 82 /* 83 * The rmtfs memory region in downstream is 'dynamically allocated' 84 * but given the same address every time. Hard code it as this address is 85 * where the modem firmware expects it to be. 86 */ 87 rmtfs_mem: rmtfs-mem@f5b01000 { 88 compatible = "qcom,rmtfs-mem"; 89 reg = <0 0xf5b01000 0 0x200000>; 90 no-map; 91 92 qcom,client-id = <1>; 93 qcom,vmid = <15>; 94 }; 95 rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { 96 no-map; 97 reg = <0 0xf5d01000 0 0x1000>; 98 }; 99 100 /* 101 * It seems like reserving the old rmtfs_mem region is also needed to prevent 102 * random crashes which are most likely modem related, more testing needed. 103 */ 104 removed_region: removed-region@88f00000 { 105 no-map; 106 reg = <0 0x88f00000 0 0x1c00000>; 107 }; 108 109 ramoops: ramoops@ac300000 { 110 compatible = "ramoops"; 111 reg = <0 0xac300000 0 0x400000>; 112 record-size = <0x40000>; 113 console-size = <0x40000>; 114 ftrace-size = <0x40000>; 115 pmsg-size = <0x200000>; 116 ecc-size = <16>; 117 }; 118 }; 119 120 vph_pwr: vph-pwr-regulator { 121 compatible = "regulator-fixed"; 122 regulator-name = "vph_pwr"; 123 regulator-min-microvolt = <3700000>; 124 regulator-max-microvolt = <3700000>; 125 }; 126 127 /* 128 * Apparently RPMh does not provide support for PM8998 S4 because it 129 * is always-on; model it as a fixed regulator. 130 */ 131 vreg_s4a_1p8: pm8998-smps4 { 132 compatible = "regulator-fixed"; 133 regulator-name = "vreg_s4a_1p8"; 134 135 regulator-min-microvolt = <1800000>; 136 regulator-max-microvolt = <1800000>; 137 138 regulator-always-on; 139 regulator-boot-on; 140 141 vin-supply = <&vph_pwr>; 142 }; 143 144 /* 145 * The touchscreen regulator seems to be controlled somehow by a gpio. 146 * Model it as a fixed regulator and keep it on. Without schematics we 147 * don't know how this is actually wired up... 148 */ 149 ts_1p8_supply: ts-1p8-regulator { 150 compatible = "regulator-fixed"; 151 regulator-name = "ts_1p8_supply"; 152 153 regulator-min-microvolt = <1800000>; 154 regulator-max-microvolt = <1800000>; 155 156 gpio = <&tlmm 88 0>; 157 enable-active-high; 158 regulator-boot-on; 159 }; 160}; 161 162&adsp_pas { 163 status = "okay"; 164 firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; 165}; 166 167&apps_rsc { 168 regulators-0 { 169 compatible = "qcom,pm8998-rpmh-regulators"; 170 qcom,pmic-id = "a"; 171 172 vdd-s1-supply = <&vph_pwr>; 173 vdd-s2-supply = <&vph_pwr>; 174 vdd-s3-supply = <&vph_pwr>; 175 vdd-s4-supply = <&vph_pwr>; 176 vdd-s5-supply = <&vph_pwr>; 177 vdd-s6-supply = <&vph_pwr>; 178 vdd-s7-supply = <&vph_pwr>; 179 vdd-s8-supply = <&vph_pwr>; 180 vdd-s9-supply = <&vph_pwr>; 181 vdd-s10-supply = <&vph_pwr>; 182 vdd-s11-supply = <&vph_pwr>; 183 vdd-s12-supply = <&vph_pwr>; 184 vdd-s13-supply = <&vph_pwr>; 185 vdd-l1-l27-supply = <&vreg_s7a_1p025>; 186 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 187 vdd-l3-l11-supply = <&vreg_s7a_1p025>; 188 vdd-l4-l5-supply = <&vreg_s7a_1p025>; 189 vdd-l6-supply = <&vph_pwr>; 190 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 191 vdd-l9-supply = <&vreg_bob>; 192 vdd-l10-l23-l25-supply = <&vreg_bob>; 193 vdd-l13-l19-l21-supply = <&vreg_bob>; 194 vdd-l16-l28-supply = <&vreg_bob>; 195 vdd-l18-l22-supply = <&vreg_bob>; 196 vdd-l20-l24-supply = <&vreg_bob>; 197 vdd-l26-supply = <&vreg_s3a_1p35>; 198 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 199 200 vreg_s3a_1p35: smps3 { 201 regulator-min-microvolt = <1352000>; 202 regulator-max-microvolt = <1352000>; 203 }; 204 205 vreg_s5a_2p04: smps5 { 206 regulator-min-microvolt = <1904000>; 207 regulator-max-microvolt = <2040000>; 208 }; 209 210 vreg_s7a_1p025: smps7 { 211 regulator-min-microvolt = <900000>; 212 regulator-max-microvolt = <1028000>; 213 }; 214 215 vdda_mipi_dsi0_pll: 216 vdda_qlink_lv: 217 vdda_ufs1_core: 218 vdda_usb1_ss_core: 219 vreg_l1a_0p875: ldo1 { 220 regulator-min-microvolt = <880000>; 221 regulator-max-microvolt = <880000>; 222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 223 }; 224 225 vreg_l2a_1p2: ldo2 { 226 regulator-min-microvolt = <1200000>; 227 regulator-max-microvolt = <1200000>; 228 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 229 regulator-always-on; 230 }; 231 232 vreg_l5a_0p8: ldo5 { 233 regulator-min-microvolt = <800000>; 234 regulator-max-microvolt = <800000>; 235 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 236 }; 237 238 vreg_l7a_1p8: ldo7 { 239 regulator-min-microvolt = <1800000>; 240 regulator-max-microvolt = <1800000>; 241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 242 }; 243 244 vdda_qusb_hs0_1p8: 245 vreg_l12a_1p8: ldo12 { 246 regulator-min-microvolt = <1800000>; 247 regulator-max-microvolt = <1800000>; 248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 249 }; 250 251 vreg_l14a_1p88: ldo14 { 252 regulator-min-microvolt = <1800000>; 253 regulator-max-microvolt = <1800000>; 254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 255 regulator-always-on; 256 }; 257 258 vreg_l17a_1p3: ldo17 { 259 regulator-min-microvolt = <1304000>; 260 regulator-max-microvolt = <1304000>; 261 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 262 }; 263 264 vreg_l20a_2p95: ldo20 { 265 regulator-min-microvolt = <2704000>; 266 regulator-max-microvolt = <2960000>; 267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 268 }; 269 270 vreg_l23a_3p3: ldo23 { 271 regulator-min-microvolt = <3300000>; 272 regulator-max-microvolt = <3312000>; 273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 274 }; 275 276 vdda_qusb_hs0_3p1: 277 vreg_l24a_3p075: ldo24 { 278 regulator-min-microvolt = <3088000>; 279 regulator-max-microvolt = <3088000>; 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 281 }; 282 283 vreg_l25a_3p3: ldo25 { 284 regulator-min-microvolt = <3300000>; 285 regulator-max-microvolt = <3312000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vdda_mipi_dsi0_1p2: 290 vdda_ufs1_1p2: 291 vreg_l26a_1p2: ldo26 { 292 regulator-min-microvolt = <1200000>; 293 regulator-max-microvolt = <1200000>; 294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 295 }; 296 297 vreg_l28a_3p0: ldo28 { 298 regulator-min-microvolt = <2856000>; 299 regulator-max-microvolt = <3008000>; 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 301 }; 302 }; 303 304 regulators-1 { 305 compatible = "qcom,pmi8998-rpmh-regulators"; 306 qcom,pmic-id = "b"; 307 308 vdd-bob-supply = <&vph_pwr>; 309 310 vreg_bob: bob { 311 regulator-min-microvolt = <3312000>; 312 regulator-max-microvolt = <3600000>; 313 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 314 regulator-allow-bypass; 315 }; 316 }; 317 318 regulators-2 { 319 compatible = "qcom,pm8005-rpmh-regulators"; 320 qcom,pmic-id = "c"; 321 322 vdd-s1-supply = <&vph_pwr>; 323 vdd-s2-supply = <&vph_pwr>; 324 vdd-s3-supply = <&vph_pwr>; 325 vdd-s4-supply = <&vph_pwr>; 326 327 vreg_s3c_0p6: smps3 { 328 regulator-min-microvolt = <600000>; 329 regulator-max-microvolt = <600000>; 330 }; 331 }; 332}; 333 334&cdsp_pas { 335 status = "okay"; 336 firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; 337}; 338 339&gcc { 340 protected-clocks = <GCC_QSPI_CORE_CLK>, 341 <GCC_QSPI_CORE_CLK_SRC>, 342 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 343 <GCC_LPASS_Q6_AXI_CLK>, 344 <GCC_LPASS_SWAY_CLK>; 345}; 346 347&gmu { 348 status = "okay"; 349}; 350 351&gpu { 352 status = "okay"; 353 354 zap-shader { 355 memory-region = <&gpu_mem>; 356 firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; 357 }; 358}; 359 360&i2c10 { 361 status = "okay"; 362 clock-frequency = <100000>; 363 364 bq27441_fg: bq27441-battery@55 { 365 compatible = "ti,bq27411"; 366 status = "okay"; 367 reg = <0x55>; 368 }; 369}; 370 371&i2c12 { 372 status = "okay"; 373 clock-frequency = <400000>; 374 375 synaptics-rmi4-i2c@20 { 376 compatible = "syna,rmi4-i2c"; 377 reg = <0x20>; 378 #address-cells = <1>; 379 #size-cells = <0>; 380 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; 381 382 pinctrl-names = "default"; 383 pinctrl-0 = <&ts_default_pins>; 384 385 vdd-supply = <&vreg_l28a_3p0>; 386 vio-supply = <&ts_1p8_supply>; 387 388 syna,reset-delay-ms = <200>; 389 syna,startup-delay-ms = <200>; 390 391 rmi4-f01@1 { 392 reg = <0x01>; 393 syna,nosleep-mode = <1>; 394 }; 395 396 rmi4_f12: rmi4-f12@12 { 397 reg = <0x12>; 398 touchscreen-x-mm = <68>; 399 touchscreen-y-mm = <144>; 400 syna,sensor-type = <1>; 401 syna,rezero-wait-ms = <200>; 402 }; 403 }; 404}; 405 406&ipa { 407 qcom,gsi-loader = "self"; 408 memory-region = <&ipa_fw_mem>; 409 firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; 410 status = "okay"; 411}; 412 413&mdss { 414 status = "okay"; 415}; 416 417&mdss_dsi0 { 418 status = "okay"; 419 vdda-supply = <&vdda_mipi_dsi0_1p2>; 420 421 /* 422 * Both devices use different panels but all other properties 423 * are common. Compatible line is declared in device dts. 424 */ 425 display_panel: panel@0 { 426 status = "disabled"; 427 428 reg = <0>; 429 430 vddio-supply = <&vreg_l14a_1p88>; 431 432 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; 433 434 pinctrl-names = "default"; 435 pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; 436 437 port { 438 panel_in: endpoint { 439 remote-endpoint = <&mdss_dsi0_out>; 440 }; 441 }; 442 }; 443}; 444 445&mdss_dsi0_out { 446 remote-endpoint = <&panel_in>; 447 data-lanes = <0 1 2 3>; 448}; 449 450&mdss_dsi0_phy { 451 status = "okay"; 452 vdds-supply = <&vdda_mipi_dsi0_pll>; 453}; 454 455/* Modem/wifi */ 456&mss_pil { 457 status = "okay"; 458 firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; 459}; 460 461&pm8998_gpios { 462 volume_down_gpio: pm8998-gpio5-state { 463 pinconf { 464 pins = "gpio5"; 465 function = "normal"; 466 input-enable; 467 bias-pull-up; 468 qcom,drive-strength = <0>; 469 }; 470 }; 471 472 volume_up_gpio: pm8998-gpio6-state { 473 pinconf { 474 pins = "gpio6"; 475 function = "normal"; 476 input-enable; 477 bias-pull-up; 478 qcom,drive-strength = <0>; 479 }; 480 }; 481}; 482 483&pmi8998_charger { 484 status = "okay"; 485}; 486 487&q6afedai { 488 dai@22 { 489 reg = <QUATERNARY_MI2S_RX>; 490 qcom,sd-lines = <1>; 491 }; 492 493 dai@23 { 494 reg = <QUATERNARY_MI2S_TX>; 495 qcom,sd-lines = <0>; 496 }; 497}; 498 499&q6asmdai { 500 dai@0 { 501 reg = <0>; 502 }; 503 504 dai@1 { 505 reg = <1>; 506 }; 507 508 dai@2 { 509 reg = <2>; 510 }; 511 512 dai@3 { 513 reg = <3>; 514 }; 515 516 dai@4 { 517 reg = <4>; 518 }; 519 520 dai@5 { 521 reg = <5>; 522 }; 523}; 524 525&qupv3_id_1 { 526 status = "okay"; 527}; 528 529&qupv3_id_0 { 530 status = "okay"; 531}; 532 533&qup_i2c10_default { 534 drive-strength = <2>; 535 bias-disable; 536}; 537 538&qup_i2c12_default { 539 drive-strength = <2>; 540 bias-disable; 541}; 542 543&qup_uart9_rx { 544 drive-strength = <2>; 545 bias-pull-up; 546}; 547 548&qup_uart9_tx { 549 drive-strength = <2>; 550 bias-disable; 551}; 552 553&slpi_pas { 554 firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; 555 status = "okay"; 556}; 557 558&sound { 559 compatible = "qcom,sdm845-sndcard"; 560 pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; 561 pinctrl-names = "default"; 562 status = "okay"; 563 564 mm1-dai-link { 565 link-name = "MultiMedia1"; 566 cpu { 567 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 568 }; 569 }; 570 571 mm2-dai-link { 572 link-name = "MultiMedia2"; 573 cpu { 574 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 575 }; 576 }; 577 578 mm3-dai-link { 579 link-name = "MultiMedia3"; 580 cpu { 581 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 582 }; 583 }; 584 585 mm4-dai-link { 586 link-name = "MultiMedia4"; 587 cpu { 588 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; 589 }; 590 }; 591 592 mm5-dai-link { 593 link-name = "MultiMedia5"; 594 cpu { 595 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; 596 }; 597 }; 598 599 mm6-dai-link { 600 link-name = "MultiMedia6"; 601 cpu { 602 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; 603 }; 604 }; 605 606 speaker_playback_dai: speaker-dai-link { 607 link-name = "Speaker Playback"; 608 cpu { 609 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; 610 }; 611 612 platform { 613 sound-dai = <&q6routing>; 614 }; 615 }; 616 617 slim-dai-link { 618 link-name = "SLIM Playback 1"; 619 cpu { 620 sound-dai = <&q6afedai SLIMBUS_0_RX>; 621 }; 622 623 platform { 624 sound-dai = <&q6routing>; 625 }; 626 627 codec { 628 sound-dai = <&wcd9340 0>; 629 }; 630 }; 631 632 slimcap-dai-link { 633 link-name = "SLIM Capture 1"; 634 cpu { 635 sound-dai = <&q6afedai SLIMBUS_0_TX>; 636 }; 637 638 platform { 639 sound-dai = <&q6routing>; 640 }; 641 642 codec { 643 sound-dai = <&wcd9340 1>; 644 }; 645 }; 646 647 slim2-dai-link { 648 link-name = "SLIM Playback 2"; 649 cpu { 650 sound-dai = <&q6afedai SLIMBUS_1_RX>; 651 }; 652 653 platform { 654 sound-dai = <&q6routing>; 655 }; 656 657 codec { 658 sound-dai = <&wcd9340 2>; /* AIF2_PB */ 659 }; 660 }; 661 662 slimcap2-dai-link { 663 link-name = "SLIM Capture 2"; 664 cpu { 665 sound-dai = <&q6afedai SLIMBUS_1_TX>; 666 }; 667 668 platform { 669 sound-dai = <&q6routing>; 670 }; 671 672 codec { 673 sound-dai = <&wcd9340 3>; /* AIF2_CAP */ 674 }; 675 }; 676 677 slimcap3-dai-link { 678 link-name = "SLIM Capture 3"; 679 cpu { 680 sound-dai = <&q6afedai SLIMBUS_2_TX>; 681 }; 682 683 platform { 684 sound-dai = <&q6routing>; 685 }; 686 687 codec { 688 sound-dai = <&wcd9340 5>; /* AIF3_CAP */ 689 }; 690 }; 691}; 692 693&uart6 { 694 status = "okay"; 695 696 pinctrl-0 = <&qup_uart6_4pin>; 697 698 bluetooth { 699 compatible = "qcom,wcn3990-bt"; 700 701 /* 702 * This path is relative to the qca/ 703 * subdir under lib/firmware. 704 */ 705 firmware-name = "oneplus6/crnv21.bin"; 706 707 vddio-supply = <&vreg_s4a_1p8>; 708 vddxo-supply = <&vreg_l7a_1p8>; 709 vddrf-supply = <&vreg_l17a_1p3>; 710 vddch0-supply = <&vreg_l25a_3p3>; 711 max-speed = <3200000>; 712 }; 713}; 714 715&uart9 { 716 label = "LS-UART1"; 717 status = "okay"; 718}; 719 720&ufs_mem_hc { 721 status = "okay"; 722 723 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; 724 725 vcc-supply = <&vreg_l20a_2p95>; 726 vcc-max-microamp = <600000>; 727}; 728 729&ufs_mem_phy { 730 status = "okay"; 731 732 vdda-phy-supply = <&vdda_ufs1_core>; 733 vdda-pll-supply = <&vdda_ufs1_1p2>; 734}; 735 736&usb_1 { 737 status = "okay"; 738 739 /* 740 * disable USB3 clock requirement as the device only supports 741 * USB2. 742 */ 743 qcom,select-utmi-as-pipe-clk; 744}; 745 746&usb_1_dwc3 { 747 /* 748 * We don't have the capability to switch modes yet. 749 */ 750 dr_mode = "peripheral"; 751 752 /* fastest mode for USB 2 */ 753 maximum-speed = "high-speed"; 754 755 /* Remove USB3 phy as it's unused on this device. */ 756 phys = <&usb_1_hsphy>; 757 phy-names = "usb2-phy"; 758}; 759 760&usb_1_hsphy { 761 status = "okay"; 762 763 vdd-supply = <&vdda_usb1_ss_core>; 764 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 765 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 766 767 qcom,imp-res-offset-value = <8>; 768 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; 769 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; 770 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; 771}; 772 773&tlmm { 774 gpio-reserved-ranges = <0 4>, <81 4>; 775 776 hall_sensor_default: hall-sensor-default-state { 777 pins = "gpio124"; 778 function = "gpio"; 779 drive-strength = <2>; 780 bias-disable; 781 }; 782 783 tri_state_key_default: tri-state-key-default-state { 784 pins = "gpio40", "gpio42", "gpio26"; 785 function = "gpio"; 786 drive-strength = <2>; 787 bias-disable; 788 }; 789 790 ts_default_pins: ts-int-state { 791 pins = "gpio99", "gpio125"; 792 function = "gpio"; 793 drive-strength = <16>; 794 bias-pull-up; 795 }; 796 797 panel_reset_pins: panel-reset-state { 798 pins = "gpio6", "gpio25", "gpio26"; 799 function = "gpio"; 800 drive-strength = <8>; 801 bias-disable; 802 }; 803 804 panel_te_pin: panel-te-state { 805 pins = "gpio10"; 806 function = "mdp_vsync"; 807 drive-strength = <2>; 808 bias-disable; 809 }; 810 811 panel_esd_pin: panel-esd-state { 812 pins = "gpio30"; 813 function = "gpio"; 814 drive-strength = <2>; 815 bias-pull-down; 816 }; 817 818 speaker_default: speaker-default-state { 819 pins = "gpio69"; 820 function = "gpio"; 821 drive-strength = <16>; 822 bias-pull-up; 823 output-high; 824 }; 825}; 826 827&venus { 828 status = "okay"; 829 firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; 830}; 831 832&wcd9340 { 833 pinctrl-0 = <&wcd_intr_default>; 834 pinctrl-names = "default"; 835 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; 836 vdd-buck-supply = <&vreg_s4a_1p8>; 837 vdd-buck-sido-supply = <&vreg_s4a_1p8>; 838 vdd-tx-supply = <&vreg_s4a_1p8>; 839 vdd-rx-supply = <&vreg_s4a_1p8>; 840 vdd-io-supply = <&vreg_s4a_1p8>; 841}; 842 843&wifi { 844 status = "okay"; 845 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 846 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 847 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 848 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 849 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 850 851 qcom,snoc-host-cap-8bit-quirk; 852}; 853