xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sdm630.dtsi (revision 842ed298)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2020, Konrad Dybcio
4 */
5
6#include <dt-bindings/clock/qcom,gcc-sdm660.h>
7#include <dt-bindings/clock/qcom,rpmcc.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10
11/ {
12	interrupt-parent = <&intc>;
13
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	chosen { };
18
19	clocks {
20		xo_board: xo_board {
21			compatible = "fixed-clock";
22			#clock-cells = <0>;
23			clock-frequency = <19200000>;
24			clock-output-names = "xo_board";
25		};
26
27		sleep_clk: sleep_clk {
28			compatible = "fixed-clock";
29			#clock-cells = <0>;
30			clock-frequency = <32764>;
31			clock-output-names = "sleep_clk";
32		};
33	};
34
35	cpus {
36		#address-cells = <2>;
37		#size-cells = <0>;
38
39		CPU0: cpu@100 {
40			device_type = "cpu";
41			compatible = "arm,cortex-a53";
42			reg = <0x0 0x100>;
43			enable-method = "psci";
44			cpu-idle-states = <&PERF_CPU_SLEEP_0
45						&PERF_CPU_SLEEP_1
46						&PERF_CLUSTER_SLEEP_0
47						&PERF_CLUSTER_SLEEP_1
48						&PERF_CLUSTER_SLEEP_2>;
49			capacity-dmips-mhz = <1126>;
50			#cooling-cells = <2>;
51			next-level-cache = <&L2_1>;
52			L2_1: l2-cache {
53				compatible = "cache";
54				cache-level = <2>;
55			};
56		};
57
58		CPU1: cpu@101 {
59			device_type = "cpu";
60			compatible = "arm,cortex-a53";
61			reg = <0x0 0x101>;
62			enable-method = "psci";
63			cpu-idle-states = <&PERF_CPU_SLEEP_0
64						&PERF_CPU_SLEEP_1
65						&PERF_CLUSTER_SLEEP_0
66						&PERF_CLUSTER_SLEEP_1
67						&PERF_CLUSTER_SLEEP_2>;
68			capacity-dmips-mhz = <1126>;
69			#cooling-cells = <2>;
70			next-level-cache = <&L2_1>;
71		};
72
73		CPU2: cpu@102 {
74			device_type = "cpu";
75			compatible = "arm,cortex-a53";
76			reg = <0x0 0x102>;
77			enable-method = "psci";
78			cpu-idle-states = <&PERF_CPU_SLEEP_0
79						&PERF_CPU_SLEEP_1
80						&PERF_CLUSTER_SLEEP_0
81						&PERF_CLUSTER_SLEEP_1
82						&PERF_CLUSTER_SLEEP_2>;
83			capacity-dmips-mhz = <1126>;
84			#cooling-cells = <2>;
85			next-level-cache = <&L2_1>;
86		};
87
88		CPU3: cpu@103 {
89			device_type = "cpu";
90			compatible = "arm,cortex-a53";
91			reg = <0x0 0x103>;
92			enable-method = "psci";
93			cpu-idle-states = <&PERF_CPU_SLEEP_0
94						&PERF_CPU_SLEEP_1
95						&PERF_CLUSTER_SLEEP_0
96						&PERF_CLUSTER_SLEEP_1
97						&PERF_CLUSTER_SLEEP_2>;
98			capacity-dmips-mhz = <1126>;
99			#cooling-cells = <2>;
100			next-level-cache = <&L2_1>;
101		};
102
103		CPU4: cpu@0 {
104			device_type = "cpu";
105			compatible = "arm,cortex-a53";
106			reg = <0x0 0x0>;
107			enable-method = "psci";
108			cpu-idle-states = <&PWR_CPU_SLEEP_0
109						&PWR_CPU_SLEEP_1
110						&PWR_CLUSTER_SLEEP_0
111						&PWR_CLUSTER_SLEEP_1
112						&PWR_CLUSTER_SLEEP_2>;
113			capacity-dmips-mhz = <1024>;
114			#cooling-cells = <2>;
115			next-level-cache = <&L2_0>;
116			L2_0: l2-cache {
117				compatible = "cache";
118				cache-level = <2>;
119			};
120		};
121
122		CPU5: cpu@1 {
123			device_type = "cpu";
124			compatible = "arm,cortex-a53";
125			reg = <0x0 0x1>;
126			enable-method = "psci";
127			cpu-idle-states = <&PWR_CPU_SLEEP_0
128						&PWR_CPU_SLEEP_1
129						&PWR_CLUSTER_SLEEP_0
130						&PWR_CLUSTER_SLEEP_1
131						&PWR_CLUSTER_SLEEP_2>;
132			capacity-dmips-mhz = <1024>;
133			#cooling-cells = <2>;
134			next-level-cache = <&L2_0>;
135		};
136
137		CPU6: cpu@2 {
138			device_type = "cpu";
139			compatible = "arm,cortex-a53";
140			reg = <0x0 0x2>;
141			enable-method = "psci";
142			cpu-idle-states = <&PWR_CPU_SLEEP_0
143						&PWR_CPU_SLEEP_1
144						&PWR_CLUSTER_SLEEP_0
145						&PWR_CLUSTER_SLEEP_1
146						&PWR_CLUSTER_SLEEP_2>;
147			capacity-dmips-mhz = <1024>;
148			#cooling-cells = <2>;
149			next-level-cache = <&L2_0>;
150		};
151
152		CPU7: cpu@3 {
153			device_type = "cpu";
154			compatible = "arm,cortex-a53";
155			reg = <0x0 0x3>;
156			enable-method = "psci";
157			cpu-idle-states = <&PWR_CPU_SLEEP_0
158						&PWR_CPU_SLEEP_1
159						&PWR_CLUSTER_SLEEP_0
160						&PWR_CLUSTER_SLEEP_1
161						&PWR_CLUSTER_SLEEP_2>;
162			capacity-dmips-mhz = <1024>;
163			#cooling-cells = <2>;
164			next-level-cache = <&L2_0>;
165		};
166
167		cpu-map {
168			cluster0 {
169				core0 {
170					cpu = <&CPU4>;
171				};
172
173				core1 {
174					cpu = <&CPU5>;
175				};
176
177				core2 {
178					cpu = <&CPU6>;
179				};
180
181				core3 {
182					cpu = <&CPU7>;
183				};
184			};
185
186			cluster1 {
187				core0 {
188					cpu = <&CPU0>;
189				};
190
191				core1 {
192					cpu = <&CPU1>;
193				};
194
195				core2 {
196					cpu = <&CPU2>;
197				};
198
199				core3 {
200					cpu = <&CPU3>;
201				};
202			};
203		};
204
205		idle-states {
206			entry-method = "psci";
207
208			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
209				compatible = "arm,idle-state";
210				idle-state-name = "pwr-retention";
211				arm,psci-suspend-param = <0x40000002>;
212				entry-latency-us = <338>;
213				exit-latency-us = <423>;
214				min-residency-us = <200>;
215			};
216
217			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
218				compatible = "arm,idle-state";
219				idle-state-name = "pwr-power-collapse";
220				arm,psci-suspend-param = <0x40000003>;
221				entry-latency-us = <515>;
222				exit-latency-us = <1821>;
223				min-residency-us = <1000>;
224				local-timer-stop;
225			};
226
227			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
228				compatible = "arm,idle-state";
229				idle-state-name = "perf-retention";
230				arm,psci-suspend-param = <0x40000002>;
231				entry-latency-us = <154>;
232				exit-latency-us = <87>;
233				min-residency-us = <200>;
234			};
235
236			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
237				compatible = "arm,idle-state";
238				idle-state-name = "perf-power-collapse";
239				arm,psci-suspend-param = <0x40000003>;
240				entry-latency-us = <262>;
241				exit-latency-us = <301>;
242				min-residency-us = <1000>;
243				local-timer-stop;
244			};
245
246			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
247				compatible = "arm,idle-state";
248				idle-state-name = "pwr-cluster-dynamic-retention";
249				arm,psci-suspend-param = <0x400000F2>;
250				entry-latency-us = <284>;
251				exit-latency-us = <384>;
252				min-residency-us = <9987>;
253				local-timer-stop;
254			};
255
256			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
257				compatible = "arm,idle-state";
258				idle-state-name = "pwr-cluster-retention";
259				arm,psci-suspend-param = <0x400000F3>;
260				entry-latency-us = <338>;
261				exit-latency-us = <423>;
262				min-residency-us = <9987>;
263				local-timer-stop;
264			};
265
266			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
267				compatible = "arm,idle-state";
268				idle-state-name = "pwr-cluster-retention";
269				arm,psci-suspend-param = <0x400000F4>;
270				entry-latency-us = <515>;
271				exit-latency-us = <1821>;
272				min-residency-us = <9987>;
273				local-timer-stop;
274			};
275
276			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
277				compatible = "arm,idle-state";
278				idle-state-name = "perf-cluster-dynamic-retention";
279				arm,psci-suspend-param = <0x400000F2>;
280				entry-latency-us = <272>;
281				exit-latency-us = <329>;
282				min-residency-us = <9987>;
283				local-timer-stop;
284			};
285
286			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
287				compatible = "arm,idle-state";
288				idle-state-name = "perf-cluster-retention";
289				arm,psci-suspend-param = <0x400000F3>;
290				entry-latency-us = <332>;
291				exit-latency-us = <368>;
292				min-residency-us = <9987>;
293				local-timer-stop;
294			};
295
296			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
297				compatible = "arm,idle-state";
298				idle-state-name = "perf-cluster-retention";
299				arm,psci-suspend-param = <0x400000F4>;
300				entry-latency-us = <545>;
301				exit-latency-us = <1609>;
302				min-residency-us = <9987>;
303				local-timer-stop;
304			};
305		};
306	};
307
308	firmware {
309		scm {
310			compatible = "qcom,scm-msm8998", "qcom,scm";
311		};
312	};
313
314	memory {
315		device_type = "memory";
316		/* We expect the bootloader to fill in the reg */
317		reg = <0 0 0 0>;
318	};
319
320	pmu {
321		compatible = "arm,armv8-pmuv3";
322		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
323	};
324
325	psci {
326		compatible = "arm,psci-1.0";
327		method = "smc";
328	};
329
330	reserved-memory {
331		#address-cells = <2>;
332		#size-cells = <2>;
333		ranges;
334
335		wlan_msa_guard: wlan-msa-guard@85600000 {
336			reg = <0x0 0x85600000 0x0 0x100000>;
337			no-map;
338		};
339
340		wlan_msa_mem: wlan-msa-mem@85700000 {
341			reg = <0x0 0x85700000 0x0 0x100000>;
342			no-map;
343		};
344
345		qhee_code: qhee-code@85800000 {
346			reg = <0x0 0x85800000 0x0 0x3700000>;
347			no-map;
348		};
349
350		smem_region: smem-mem@86000000 {
351			reg = <0 0x86000000 0 0x200000>;
352			no-map;
353		};
354
355		tz_mem: memory@86200000 {
356			reg = <0x0 0x86200000 0x0 0x3300000>;
357			no-map;
358		};
359
360		modem_fw_mem: modem-fw-region@8ac00000 {
361			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
362			no-map;
363		};
364
365		adsp_fw_mem: adsp-fw-region@92a00000 {
366			reg = <0x0 0x92a00000 0x0 0x1e00000>;
367			no-map;
368		};
369
370		pil_mba_mem: pil-mba-region@94800000 {
371			reg = <0x0 0x94800000 0x0 0x200000>;
372			no-map;
373		};
374
375		buffer_mem: buffer-region@94a00000 {
376			reg = <0x0 0x94a00000 0x0 0x100000>;
377			no-map;
378		};
379
380		venus_fw_mem: venus-fw-region@9f800000 {
381			reg = <0x0 0x9f800000 0x0 0x800000>;
382			no-map;
383		};
384
385		secure_region2: secure-region2@f7c00000 {
386			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
387			no-map;
388		};
389
390		adsp_mem: adsp-region@f6000000 {
391			reg = <0x0 0xf6000000 0x0 0x800000>;
392			no-map;
393		};
394
395		qseecom_ta_mem: qseecom-ta-region@fec00000 {
396			reg = <0x0 0xfec00000 0x0 0x1000000>;
397			no-map;
398		};
399
400		qseecom_mem: qseecom-region@f6800000 {
401			reg = <0x0 0xf6800000 0x0 0x1400000>;
402			no-map;
403		};
404
405		secure_display_memory: secure-region@f5c00000 {
406			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
407			no-map;
408		};
409
410		cont_splash_mem: cont-splash-region@9d400000 {
411			reg = <0x0 0x9d400000 0x0 0x23ff000>;
412			no-map;
413		};
414	};
415
416	rpm-glink {
417		compatible = "qcom,glink-rpm";
418
419		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
420		qcom,rpm-msg-ram = <&rpm_msg_ram>;
421		mboxes = <&apcs_glb 0>;
422
423		rpm_requests: rpm-requests {
424			compatible = "qcom,rpm-sdm660";
425			qcom,glink-channels = "rpm_requests";
426
427			rpmcc: clock-controller {
428				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
429				#clock-cells = <1>;
430			};
431		};
432	};
433
434	smem: smem {
435		compatible = "qcom,smem";
436		memory-region = <&smem_region>;
437		hwlocks = <&tcsr_mutex 3>;
438	};
439
440	soc {
441		#address-cells = <1>;
442		#size-cells = <1>;
443		ranges = <0 0 0 0xffffffff>;
444		compatible = "simple-bus";
445
446		gcc: clock-controller@100000 {
447			compatible = "qcom,gcc-sdm630";
448			#clock-cells = <1>;
449			#reset-cells = <1>;
450			#power-domain-cells = <1>;
451			reg = <0x00100000 0x94000>;
452
453			clock-names = "xo", "sleep_clk";
454			clocks = <&xo_board>,
455					<&sleep_clk>;
456		};
457
458		rpm_msg_ram: memory@778000 {
459			compatible = "qcom,rpm-msg-ram";
460			reg = <0x00778000 0x7000>;
461		};
462
463		qfprom: qfprom@780000 {
464			compatible = "qcom,qfprom";
465			reg = <0x00780000 0x621c>;
466			#address-cells = <1>;
467			#size-cells = <1>;
468		};
469
470		rng: rng@793000 {
471			compatible = "qcom,prng-ee";
472			reg = <0x00793000 0x1000>;
473			clocks = <&gcc GCC_PRNG_AHB_CLK>;
474			clock-names = "core";
475		};
476
477		restart@10ac000 {
478			compatible = "qcom,pshold";
479			reg = <0x010ac000 0x4>;
480		};
481
482		anoc2_smmu: iommu@16c0000 {
483			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
484			reg = <0x016c0000 0x40000>;
485			#iommu-cells = <1>;
486
487			#global-interrupts = <2>;
488			interrupts =
489				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
490				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
491
492				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
493				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
494				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
495				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
496				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
497				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
498				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
499				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
500				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
501				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
502				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
503				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
504				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
505				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
506				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
507				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
508				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
509				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
510				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
511				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
512				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
513				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
514				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
515				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
516				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
517				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
518				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
519				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
520				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
521
522			status = "disabled";
523		};
524
525		tcsr_mutex_regs: syscon@1f40000 {
526			compatible = "syscon";
527			reg = <0x01f40000 0x20000>;
528		};
529
530		tlmm: pinctrl@3000000 {
531			compatible = "qcom,sdm630-pinctrl";
532			reg = <0x03000000 0xc00000>;
533			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
534			gpio-controller;
535			#gpio-cells = <0x2>;
536			interrupt-controller;
537			#interrupt-cells = <0x2>;
538
539			blsp1_uart1_default: blsp1-uart1-default {
540				pins = "gpio0", "gpio1", "gpio2", "gpio3";
541				drive-strength = <2>;
542				bias-disable;
543			};
544
545			blsp1_uart1_sleep: blsp1-uart1-sleep {
546				pins = "gpio0", "gpio1", "gpio2", "gpio3";
547				drive-strength = <2>;
548				bias-disable;
549			};
550
551			blsp1_uart2_default: blsp1-uart2-default {
552				pins = "gpio4", "gpio5";
553				drive-strength = <2>;
554				bias-disable;
555			};
556
557			blsp2_uart1_tx_active: blsp2-uart1-tx-active {
558				pins = "gpio16";
559				drive-strength = <2>;
560				bias-disable;
561			};
562
563			blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
564				pins = "gpio16";
565				drive-strength = <2>;
566				bias-pull-up;
567			};
568
569			blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
570				pins = "gpio17", "gpio18";
571				drive-strength = <2>;
572				bias-disable;
573			};
574
575			blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
576				pins = "gpio17", "gpio18";
577				drive-strength = <2>;
578				bias-no-pull;
579			};
580
581			blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
582				pins = "gpio19";
583				drive-strength = <2>;
584				bias-disable;
585			};
586
587			blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
588				pins = "gpio19";
589				drive-strength = <2>;
590				bias-no-pull;
591			};
592
593			i2c1_default: i2c1-default {
594				pins = "gpio2", "gpio3";
595				drive-strength = <2>;
596				bias-disable;
597			};
598
599			i2c1_sleep: i2c1-sleep {
600				pins = "gpio2", "gpio3";
601				drive-strength = <2>;
602				bias-pull-up;
603			};
604
605			i2c2_default: i2c2-default {
606				pins = "gpio6", "gpio7";
607				drive-strength = <2>;
608				bias-disable;
609			};
610
611			i2c2_sleep: i2c2-sleep {
612				pins = "gpio6", "gpio7";
613				drive-strength = <2>;
614				bias-pull-up;
615			};
616
617			i2c3_default: i2c3-default {
618				pins = "gpio10", "gpio11";
619				drive-strength = <2>;
620				bias-disable;
621			};
622
623			i2c3_sleep: i2c3-sleep {
624				pins = "gpio10", "gpio11";
625				drive-strength = <2>;
626				bias-pull-up;
627			};
628
629			i2c4_default: i2c4-default {
630				pins = "gpio14", "gpio15";
631				drive-strength = <2>;
632				bias-disable;
633			};
634
635			i2c4_sleep: i2c4-sleep {
636				pins = "gpio14", "gpio15";
637				drive-strength = <2>;
638				bias-pull-up;
639			};
640
641			i2c5_default: i2c5-default {
642				pins = "gpio18", "gpio19";
643				drive-strength = <2>;
644				bias-disable;
645			};
646
647			i2c5_sleep: i2c5-sleep {
648				pins = "gpio18", "gpio19";
649				drive-strength = <2>;
650				bias-pull-up;
651			};
652
653			i2c6_default: i2c6-default {
654				pins = "gpio22", "gpio23";
655				drive-strength = <2>;
656				bias-disable;
657			};
658
659			i2c6_sleep: i2c6-sleep {
660				pins = "gpio22", "gpio23";
661				drive-strength = <2>;
662				bias-pull-up;
663			};
664
665			i2c7_default: i2c7-default {
666				pins = "gpio26", "gpio27";
667				drive-strength = <2>;
668				bias-disable;
669			};
670
671			i2c7_sleep: i2c7-sleep {
672				pins = "gpio26", "gpio27";
673				drive-strength = <2>;
674				bias-pull-up;
675			};
676
677			i2c8_default: i2c8-default {
678				pins = "gpio30", "gpio31";
679				drive-strength = <2>;
680				bias-disable;
681			};
682
683			i2c8_sleep: i2c8-sleep {
684				pins = "gpio30", "gpio31";
685				drive-strength = <2>;
686				bias-pull-up;
687			};
688
689			sdc1_clk_on: sdc1-clk-on {
690				pins = "sdc1_clk";
691				bias-disable;
692				drive-strength = <16>;
693			};
694
695			sdc1_clk_off: sdc1-clk-off {
696				pins = "sdc1_clk";
697				bias-disable;
698				drive-strength = <2>;
699			};
700
701			sdc1_cmd_on: sdc1-cmd-on {
702				pins = "sdc1_cmd";
703				bias-pull-up;
704				drive-strength = <10>;
705			};
706
707			sdc1_cmd_off: sdc1-cmd-off {
708				pins = "sdc1_cmd";
709				bias-pull-up;
710				drive-strength = <2>;
711			};
712
713			sdc1_data_on: sdc1-data-on {
714				pins = "sdc1_data";
715				bias-pull-up;
716				drive-strength = <8>;
717			};
718
719			sdc1_data_off: sdc1-data-off {
720				pins = "sdc1_data";
721				bias-pull-up;
722				drive-strength = <2>;
723			};
724
725			sdc1_rclk_on: sdc1-rclk-on {
726				pins = "sdc1_rclk";
727				bias-pull-down;
728			};
729
730			sdc1_rclk_off: sdc1-rclk-off {
731				pins = "sdc1_rclk";
732				bias-pull-down;
733			};
734		};
735
736		kgsl_smmu: iommu@5040000 {
737			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
738			reg = <0x05040000 0x10000>;
739			#iommu-cells = <1>;
740
741			#global-interrupts = <2>;
742			interrupts =
743				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
744				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
745
746				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
747				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
748				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
749				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
750				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
751				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
752				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
753				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
754
755			status = "disabled";
756		};
757
758		lpass_smmu: iommu@5100000 {
759			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
760			reg = <0x05100000 0x40000>;
761			#iommu-cells = <1>;
762
763			#global-interrupts = <2>;
764			interrupts =
765				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
766				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
767
768				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
769				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
770				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
771				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
772				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
773				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
774				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
775				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
776				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
777				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
778				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
779				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
780				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
781				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
782				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
783				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
784				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
785
786			status = "disabled";
787		};
788
789		spmi_bus: spmi@800f000 {
790			compatible = "qcom,spmi-pmic-arb";
791			reg =	<0x0800f000 0x1000>,
792				<0x08400000 0x1000000>,
793				<0x09400000 0x1000000>,
794				<0x0a400000 0x220000>,
795				<0x0800a000 0x3000>;
796			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
797			interrupt-names = "periph_irq";
798			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
799			qcom,ee = <0>;
800			qcom,channel = <0>;
801			#address-cells = <2>;
802			#size-cells = <0>;
803			interrupt-controller;
804			#interrupt-cells = <4>;
805			cell-index = <0>;
806		};
807
808		sdhc_1: sdhci@c0c4000 {
809			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
810			reg = <0x0c0c4000 0x1000>,
811				<0x0c0c5000 0x1000>;
812			reg-names = "hc", "cqhci";
813
814			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
815					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
816			interrupt-names = "hc_irq", "pwr_irq";
817
818			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
819					<&gcc GCC_SDCC1_AHB_CLK>,
820					<&xo_board>;
821			clock-names = "core", "iface", "xo";
822
823			pinctrl-names = "default", "sleep";
824			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
825			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
826
827			bus-width = <8>;
828			non-removable;
829
830			status = "disabled";
831		};
832
833		blsp1_dma: dma-controller@c144000 {
834			compatible = "qcom,bam-v1.7.0";
835			reg = <0x0c144000 0x1f000>;
836			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
837			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
838			clock-names = "bam_clk";
839			#dma-cells = <1>;
840			qcom,ee = <0>;
841			qcom,controlled-remotely;
842			num-channels = <18>;
843			qcom,num-ees = <4>;
844		};
845
846		blsp1_uart1: serial@c16f000 {
847			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
848			reg = <0x0c16f000 0x200>;
849			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
850			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
851				 <&gcc GCC_BLSP1_AHB_CLK>;
852			clock-names = "core", "iface";
853			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
854			dma-names = "tx", "rx";
855			pinctrl-names = "default", "sleep";
856			pinctrl-0 = <&blsp1_uart1_default>;
857			pinctrl-1 = <&blsp1_uart1_sleep>;
858			status = "disabled";
859		};
860
861		blsp1_uart2: serial@c170000 {
862			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
863			reg = <0x0c170000 0x1000>;
864			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
865			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
866				 <&gcc GCC_BLSP1_AHB_CLK>;
867			clock-names = "core", "iface";
868			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
869			dma-names = "tx", "rx";
870			pinctrl-names = "default";
871			pinctrl-0 = <&blsp1_uart2_default>;
872			status = "disabled";
873		};
874
875		blsp_i2c1: i2c@c175000 {
876			compatible = "qcom,i2c-qup-v2.2.1";
877			reg = <0x0c175000 0x600>;
878			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
879
880			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
881					<&gcc GCC_BLSP1_AHB_CLK>;
882			clock-names = "core", "iface";
883			clock-frequency = <400000>;
884
885			pinctrl-names = "default", "sleep";
886			pinctrl-0 = <&i2c1_default>;
887			pinctrl-1 = <&i2c1_sleep>;
888			#address-cells = <1>;
889			#size-cells = <0>;
890			status = "disabled";
891		};
892
893		blsp_i2c2: i2c@c176000 {
894			compatible = "qcom,i2c-qup-v2.2.1";
895			reg = <0x0c176000 0x600>;
896			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
897
898			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
899				 <&gcc GCC_BLSP1_AHB_CLK>;
900			clock-names = "core", "iface";
901			clock-frequency = <400000>;
902
903			pinctrl-names = "default", "sleep";
904			pinctrl-0 = <&i2c2_default>;
905			pinctrl-1 = <&i2c2_sleep>;
906			#address-cells = <1>;
907			#size-cells = <0>;
908			status = "disabled";
909		};
910
911		blsp_i2c3: i2c@c177000 {
912			compatible = "qcom,i2c-qup-v2.2.1";
913			reg = <0x0c177000 0x600>;
914			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
915
916			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
917				 <&gcc GCC_BLSP1_AHB_CLK>;
918			clock-names = "core", "iface";
919			clock-frequency = <400000>;
920
921			pinctrl-names = "default", "sleep";
922			pinctrl-0 = <&i2c3_default>;
923			pinctrl-1 = <&i2c3_sleep>;
924			#address-cells = <1>;
925			#size-cells = <0>;
926			status = "disabled";
927		};
928
929		blsp_i2c4: i2c@c178000 {
930			compatible = "qcom,i2c-qup-v2.2.1";
931			reg = <0x0c178000 0x600>;
932			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
933
934			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
935				 <&gcc GCC_BLSP1_AHB_CLK>;
936			clock-names = "core", "iface";
937			clock-frequency = <400000>;
938
939			pinctrl-names = "default", "sleep";
940			pinctrl-0 = <&i2c4_default>;
941			pinctrl-1 = <&i2c4_sleep>;
942			#address-cells = <1>;
943			#size-cells = <0>;
944			status = "disabled";
945		};
946
947		blsp2_dma: dma-controller@c184000 {
948			compatible = "qcom,bam-v1.7.0";
949			reg = <0x0c184000 0x1f000>;
950			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
951			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
952			clock-names = "bam_clk";
953			#dma-cells = <1>;
954			qcom,ee = <0>;
955			qcom,controlled-remotely;
956			num-channels = <18>;
957			qcom,num-ees = <4>;
958		};
959
960		blsp2_uart1: serial@c1af000 {
961			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
962			reg = <0x0c1af000 0x200>;
963			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
964			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
965				 <&gcc GCC_BLSP2_AHB_CLK>;
966			clock-names = "core", "iface";
967			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
968			dma-names = "tx", "rx";
969			pinctrl-names = "default", "sleep";
970			pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
971				&blsp2_uart1_rfr_active>;
972			pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
973				&blsp2_uart1_rfr_sleep>;
974			status = "disabled";
975		};
976
977		blsp_i2c5: i2c@c1b5000 {
978			compatible = "qcom,i2c-qup-v2.2.1";
979			reg = <0x0c1b5000 0x600>;
980			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
981
982			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
983				 <&gcc GCC_BLSP2_AHB_CLK>;
984			clock-names = "core", "iface";
985			clock-frequency = <400000>;
986
987			pinctrl-names = "default", "sleep";
988			pinctrl-0 = <&i2c5_default>;
989			pinctrl-1 = <&i2c5_sleep>;
990			#address-cells = <1>;
991			#size-cells = <0>;
992			status = "disabled";
993		};
994
995		blsp_i2c6: i2c@c1b6000 {
996			compatible = "qcom,i2c-qup-v2.2.1";
997			reg = <0x0c1b6000 0x600>;
998			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
999
1000			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
1001				 <&gcc GCC_BLSP2_AHB_CLK>;
1002			clock-names = "core", "iface";
1003			clock-frequency = <400000>;
1004
1005			pinctrl-names = "default", "sleep";
1006			pinctrl-0 = <&i2c6_default>;
1007			pinctrl-1 = <&i2c6_sleep>;
1008			#address-cells = <1>;
1009			#size-cells = <0>;
1010			status = "disabled";
1011		};
1012
1013		blsp_i2c7: i2c@c1b7000 {
1014			compatible = "qcom,i2c-qup-v2.2.1";
1015			reg = <0x0c1b7000 0x600>;
1016			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1017
1018			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
1019				 <&gcc GCC_BLSP2_AHB_CLK>;
1020			clock-names = "core", "iface";
1021			clock-frequency = <400000>;
1022
1023			pinctrl-names = "default", "sleep";
1024			pinctrl-0 = <&i2c7_default>;
1025			pinctrl-1 = <&i2c7_sleep>;
1026			#address-cells = <1>;
1027			#size-cells = <0>;
1028			status = "disabled";
1029		};
1030
1031		blsp_i2c8: i2c@c1b8000 {
1032			compatible = "qcom,i2c-qup-v2.2.1";
1033			reg = <0x0c1b8000 0x600>;
1034			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1035
1036			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
1037				 <&gcc GCC_BLSP2_AHB_CLK>;
1038			clock-names = "core", "iface";
1039			clock-frequency = <400000>;
1040
1041			pinctrl-names = "default", "sleep";
1042			pinctrl-0 = <&i2c8_default>;
1043			pinctrl-1 = <&i2c8_sleep>;
1044			#address-cells = <1>;
1045			#size-cells = <0>;
1046			status = "disabled";
1047		};
1048
1049		mmss_smmu: iommu@cd00000 {
1050			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
1051			reg = <0x0cd00000 0x40000>;
1052			#iommu-cells = <1>;
1053
1054			#global-interrupts = <2>;
1055			interrupts =
1056				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
1057				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
1058
1059				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
1060				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
1061				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
1062				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
1063				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1064				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1065				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1066				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1067				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1068				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1069				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1070				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1071				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1072				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1073				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
1074				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
1075				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
1076				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
1077				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
1078				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
1079				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
1080				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
1081				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
1082				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
1083
1084			status = "disabled";
1085		};
1086
1087		apcs_glb: mailbox@17911000 {
1088			compatible = "qcom,sdm660-apcs-hmss-global";
1089			reg = <0x17911000 0x1000>;
1090
1091			#mbox-cells = <1>;
1092		};
1093
1094		timer@17920000 {
1095			#address-cells = <1>;
1096			#size-cells = <1>;
1097			ranges;
1098			compatible = "arm,armv7-timer-mem";
1099			reg = <0x17920000 0x1000>;
1100			clock-frequency = <19200000>;
1101
1102			frame@17921000 {
1103				frame-number = <0>;
1104				interrupts = <0 8 0x4>,
1105						<0 7 0x4>;
1106				reg = <0x17921000 0x1000>,
1107					<0x17922000 0x1000>;
1108			};
1109
1110			frame@17923000 {
1111				frame-number = <1>;
1112				interrupts = <0 9 0x4>;
1113				reg = <0x17923000 0x1000>;
1114				status = "disabled";
1115			};
1116
1117			frame@17924000 {
1118				frame-number = <2>;
1119				interrupts = <0 10 0x4>;
1120				reg = <0x17924000 0x1000>;
1121				status = "disabled";
1122			};
1123
1124			frame@17925000 {
1125				frame-number = <3>;
1126				interrupts = <0 11 0x4>;
1127				reg = <0x17925000 0x1000>;
1128				status = "disabled";
1129			};
1130
1131			frame@17926000 {
1132				frame-number = <4>;
1133				interrupts = <0 12 0x4>;
1134				reg = <0x17926000 0x1000>;
1135				status = "disabled";
1136			};
1137
1138			frame@17927000 {
1139				frame-number = <5>;
1140				interrupts = <0 13 0x4>;
1141				reg = <0x17927000 0x1000>;
1142				status = "disabled";
1143			};
1144
1145			frame@17928000 {
1146				frame-number = <6>;
1147				interrupts = <0 14 0x4>;
1148				reg = <0x17928000 0x1000>;
1149				status = "disabled";
1150			};
1151		};
1152
1153		intc: interrupt-controller@17a00000 {
1154			compatible = "arm,gic-v3";
1155			reg = <0x17a00000 0x10000>,	   /* GICD */
1156				  <0x17b00000 0x100000>;	  /* GICR * 8 */
1157			#interrupt-cells = <3>;
1158			#address-cells = <1>;
1159			#size-cells = <1>;
1160			ranges;
1161			interrupt-controller;
1162			#redistributor-regions = <1>;
1163			redistributor-stride = <0x0 0x20000>;
1164			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1165		};
1166	};
1167
1168	tcsr_mutex: hwlock {
1169		compatible = "qcom,tcsr-mutex";
1170		syscon = <&tcsr_mutex_regs 0 0x1000>;
1171		#hwlock-cells = <1>;
1172	};
1173
1174	timer {
1175		compatible = "arm,armv8-timer";
1176		interrupts = <GIC_PPI 1 0xf08>,
1177				 <GIC_PPI 2 0xf08>,
1178				 <GIC_PPI 3 0xf08>,
1179				 <GIC_PPI 0 0xf08>;
1180	};
1181};
1182
1183