1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> 4 * Copyright (c) 2020, AngeloGioacchino Del Regno 5 * <angelogioacchino.delregno@somainline.org> 6 */ 7 8#include "pm660.dtsi" 9#include "pm660l.dtsi" 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/input/input.h> 12#include <dt-bindings/input/gpio-keys.h> 13#include <dt-bindings/leds/common.h> 14 15/ { 16 /* required for bootloader to select correct board */ 17 qcom,msm-id = <318 0>; 18 qcom,board-id = <8 1>; 19 qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; 20 21 /* This part enables graphical output via bootloader-enabled display */ 22 chosen { 23 bootargs = "earlycon=tty0 console=tty0"; 24 25 #address-cells = <2>; 26 #size-cells = <2>; 27 ranges; 28 29 stdout-path = "framebuffer0"; 30 31 framebuffer0: framebuffer@9d400000 { 32 compatible = "simple-framebuffer"; 33 reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; 34 width = <1080>; 35 height = <1920>; 36 stride = <(1080 * 4)>; 37 format = "a8r8g8b8"; 38 status = "okay"; 39 }; 40 }; 41 42 board_vbat: vbat-regulator { 43 compatible = "regulator-fixed"; 44 regulator-name = "VBAT"; 45 46 regulator-min-microvolt = <4000000>; 47 regulator-max-microvolt = <4000000>; 48 regulator-always-on; 49 regulator-boot-on; 50 }; 51 52 vph_pwr: vph-pwr-regulator { 53 compatible = "regulator-fixed"; 54 regulator-name = "vph_pwr"; 55 56 regulator-always-on; 57 regulator-boot-on; 58 }; 59 60 cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { 61 compatible = "regulator-fixed"; 62 regulator-name = "cam_vdig_imx300_219_vreg"; 63 startup-delay-us = <0>; 64 enable-active-high; 65 gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; 66 pinctrl-names = "default"; 67 pinctrl-0 = <&cam_vdig_default>; 68 }; 69 70 cam_vana_front_vreg: cam_vana_front_vreg { 71 compatible = "regulator-fixed"; 72 regulator-name = "cam_vana_front_vreg"; 73 startup-delay-us = <0>; 74 enable-active-high; 75 gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; 76 pinctrl-names = "default"; 77 pinctrl-0 = <&imx219_vana_default>; 78 }; 79 80 cam_vana_rear_vreg: cam_vana_rear_vreg { 81 compatible = "regulator-fixed"; 82 regulator-name = "cam_vana_rear_vreg"; 83 startup-delay-us = <0>; 84 enable-active-high; 85 gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; 86 regulator-always-on; 87 pinctrl-names = "default"; 88 pinctrl-0 = <&imx300_vana_default>; 89 }; 90 91 gpio-keys { 92 compatible = "gpio-keys"; 93 94 key-camera-focus { 95 label = "Camera Focus"; 96 gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; 97 linux,input-type = <1>; 98 linux,code = <KEY_CAMERA_FOCUS>; 99 debounce-interval = <15>; 100 }; 101 102 key-camera-snapshot { 103 label = "Camera Snapshot"; 104 gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; 105 linux,input-type = <1>; 106 linux,code = <KEY_CAMERA>; 107 debounce-interval = <15>; 108 }; 109 110 key-vol-down { 111 label = "Volume Down"; 112 gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; 113 linux,input-type = <1>; 114 linux,code = <KEY_VOLUMEDOWN>; 115 gpio-key,wakeup; 116 debounce-interval = <15>; 117 }; 118 }; 119 120 reserved-memory { 121 #address-cells = <2>; 122 #size-cells = <2>; 123 ranges; 124 125 ramoops@ffc00000 { 126 compatible = "ramoops"; 127 reg = <0x0 0xffc00000 0x0 0x100000>; 128 record-size = <0x10000>; 129 console-size = <0x60000>; 130 ftrace-size = <0x10000>; 131 pmsg-size = <0x20000>; 132 ecc-size = <16>; 133 status = "okay"; 134 }; 135 136 debug_region@ffb00000 { 137 reg = <0x00 0xffb00000 0x00 0x100000>; 138 no-map; 139 }; 140 141 removed_region@85800000 { 142 reg = <0x00 0x85800000 0x00 0x3700000>; 143 no-map; 144 }; 145 }; 146 147 /* 148 * Until we hook up type-c detection, we 149 * have to stick with this. But it works. 150 */ 151 extcon_usb: extcon-usb { 152 compatible = "linux,extcon-usb-gpio"; 153 id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; 154 }; 155}; 156 157&adsp_pil { 158 firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt"; 159}; 160 161&blsp_i2c1 { 162 status = "okay"; 163 164 touchscreen: synaptics-rmi4-i2c@70 { 165 compatible = "syna,rmi4-i2c"; 166 reg = <0x70>; 167 #address-cells = <1>; 168 #size-cells = <0>; 169 interrupts-extended = <&tlmm 45 0x2008>; 170 171 pinctrl-names = "default"; 172 pinctrl-0 = <&ts_int_active &ts_lcd_id_active>; 173 174 syna,reset-delay-ms = <200>; 175 syna,startup-delay-ms = <220>; 176 177 rmi4-f01@1 { 178 reg = <0x01>; 179 syna,nosleep-mode = <1>; 180 }; 181 182 rmi4-f11@11 { 183 reg = <0x11>; 184 syna,sensor-type = <1>; 185 }; 186 }; 187}; 188 189&blsp_i2c2 { 190 status = "okay"; 191 192 /* SMB1351 charger */ 193}; 194 195/* I2C3, 4, 5, 7 and 8 are disabled on this board. */ 196 197&blsp_i2c6 { 198 status = "okay"; 199 200 /* NXP NFC */ 201}; 202 203&blsp1_uart2 { 204 status = "okay"; 205 206 /* MSM serial console */ 207}; 208 209&blsp2_uart1 { 210 status = "okay"; 211 212 /* HCI Bluetooth */ 213}; 214 215&pm660l_lpg { 216 qcom,power-source = <1>; 217 218 status = "okay"; 219 220 multi-led { 221 color = <LED_COLOR_ID_RGB>; 222 function = LED_FUNCTION_STATUS; 223 224 #address-cells = <1>; 225 #size-cells = <0>; 226 227 led@1 { 228 reg = <1>; 229 color = <LED_COLOR_ID_BLUE>; 230 }; 231 232 led@2 { 233 reg = <2>; 234 color = <LED_COLOR_ID_GREEN>; 235 }; 236 237 led@3 { 238 reg = <3>; 239 color = <LED_COLOR_ID_RED>; 240 }; 241 }; 242}; 243 244&pon_pwrkey { 245 status = "okay"; 246}; 247 248&pon_resin { 249 status = "okay"; 250 251 linux,code = <KEY_VOLUMEUP>; 252}; 253 254&qusb2phy0 { 255 status = "okay"; 256 257 vdd-supply = <&vreg_l1b_0p925>; 258 vdda-pll-supply = <&vreg_l10a_1p8>; 259 vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; 260}; 261 262&rpm_requests { 263 regulators-0 { 264 compatible = "qcom,rpm-pm660l-regulators"; 265 266 vdd_s1-supply = <&vph_pwr>; 267 vdd_s2-supply = <&vph_pwr>; 268 vdd_s3_s4-supply = <&vph_pwr>; 269 vdd_s5-supply = <&vph_pwr>; 270 vdd_s6-supply = <&vph_pwr>; 271 272 vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; 273 vdd_l2-supply = <&vreg_bob>; 274 vdd_l3_l5_l7_l8-supply = <&vreg_bob>; 275 vdd_l4_l6-supply = <&vreg_bob>; 276 vdd_bob-supply = <&vph_pwr>; 277 278 vreg_s1b_1p125: s1 { 279 regulator-min-microvolt = <1125000>; 280 regulator-max-microvolt = <1125000>; 281 regulator-enable-ramp-delay = <200>; 282 regulator-ramp-delay = <0>; 283 }; 284 285 vreg_s2b_1p05: s2 { 286 regulator-min-microvolt = <1050000>; 287 regulator-max-microvolt = <1050000>; 288 regulator-enable-ramp-delay = <200>; 289 regulator-ramp-delay = <0>; 290 }; 291 292 /* 293 * At least on Nile's configuration, S3B/S4B (VDD_CX) and 294 * S5B (VDD_MX) are managed only through RPM Power Domains. 295 * Trying to set a voltage on the main supply will create 296 * havoc and freeze the SoC. 297 * In any case, reference voltages for these regulators are: 298 * S3B/S4B: 0.870V 299 * S5B: 0.915V 300 */ 301 302 /* LDOs */ 303 vreg_l1b_0p925: l1 { 304 regulator-min-microvolt = <920000>; 305 regulator-max-microvolt = <928000>; 306 regulator-enable-ramp-delay = <250>; 307 regulator-ramp-delay = <0>; 308 regulator-allow-set-load; 309 }; 310 311 vreg_l2b_2p95: l2 { 312 /* 313 * This regulator supports 1.648 - 3.104V on this board 314 * but we set a max voltage of anything less than 2.7V 315 * to satisfy a condition in sdhci.c that will disable 316 * 3.3V SDHCI signaling, which happens to be not really 317 * supported on the Xperia Nile/Ganges platform. 318 */ 319 regulator-min-microvolt = <1648000>; 320 regulator-max-microvolt = <2696000>; 321 regulator-enable-ramp-delay = <250>; 322 regulator-ramp-delay = <0>; 323 regulator-allow-set-load; 324 }; 325 326 vreg_l3b_3p0: l3 { 327 regulator-min-microvolt = <2800000>; 328 regulator-max-microvolt = <2800000>; 329 regulator-enable-ramp-delay = <250>; 330 regulator-ramp-delay = <0>; 331 regulator-min-microamp = <200>; 332 regulator-max-microamp = <600000>; 333 regulator-system-load = <100000>; 334 regulator-allow-set-load; 335 }; 336 337 vreg_l4b_2p95: l4 { 338 regulator-min-microvolt = <2944000>; 339 regulator-max-microvolt = <2952000>; 340 regulator-enable-ramp-delay = <250>; 341 regulator-ramp-delay = <0>; 342 343 regulator-min-microamp = <200>; 344 regulator-max-microamp = <600000>; 345 regulator-system-load = <570000>; 346 regulator-allow-set-load; 347 }; 348 349 /* 350 * Downstream specifies a range of 1721-3600mV, 351 * but the only assigned consumers are SDHCI2 VMMC 352 * and Coresight QPDI that both request pinned 2.95V. 353 * Tighten the range to 1.8-3.328 (closest to 3.3) to 354 * make the mmc driver happy. 355 */ 356 vreg_l5b_2p95: l5 { 357 regulator-min-microvolt = <1800000>; 358 regulator-max-microvolt = <3328000>; 359 regulator-enable-ramp-delay = <250>; 360 regulator-ramp-delay = <0>; 361 regulator-allow-set-load; 362 regulator-system-load = <800000>; 363 }; 364 365 vreg_l6b_3p3: l6 { 366 regulator-min-microvolt = <1704000>; 367 regulator-max-microvolt = <3312000>; 368 regulator-enable-ramp-delay = <250>; 369 regulator-ramp-delay = <0>; 370 }; 371 372 vreg_l7b_3p125: l7 { 373 regulator-min-microvolt = <2704000>; 374 regulator-max-microvolt = <3128000>; 375 regulator-enable-ramp-delay = <250>; 376 regulator-ramp-delay = <0>; 377 }; 378 379 vreg_l8b_3p3: l8 { 380 regulator-min-microvolt = <2800000>; 381 regulator-max-microvolt = <3400000>; 382 regulator-enable-ramp-delay = <250>; 383 regulator-ramp-delay = <0>; 384 }; 385 386 /* L9B (870mV) is currently unused */ 387 /* L10B (915mV) is currently unused */ 388 389 vreg_bob: bob { 390 regulator-min-microvolt = <3304000>; 391 regulator-max-microvolt = <3624000>; 392 regulator-enable-ramp-delay = <500>; 393 regulator-ramp-delay = <0>; 394 }; 395 }; 396 397 regulators-1 { 398 compatible = "qcom,rpm-pm660-regulators"; 399 400 vdd_s1-supply = <&vph_pwr>; 401 vdd_s2-supply = <&vph_pwr>; 402 vdd_s3-supply = <&vph_pwr>; 403 vdd_s4-supply = <&vph_pwr>; 404 vdd_s5-supply = <&vph_pwr>; 405 vdd_s6-supply = <&vph_pwr>; 406 407 vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; 408 vdd_l2_l3-supply = <&vreg_s2b_1p05>; 409 vdd_l5-supply = <&vreg_s2b_1p05>; 410 vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; 411 vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; 412 413 /* 414 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed 415 * by the Core Power Reduction hardened (CPRh) and the 416 * Operating State Manager (OSM) HW automatically. 417 */ 418 419 vreg_s4a_2p04: s4 { 420 regulator-min-microvolt = <2040000>; 421 regulator-max-microvolt = <2040000>; 422 regulator-enable-ramp-delay = <200>; 423 regulator-ramp-delay = <0>; 424 regulator-always-on; 425 }; 426 427 vreg_s5a_1p35: s5 { 428 regulator-min-microvolt = <1224000>; 429 regulator-max-microvolt = <1350000>; 430 regulator-enable-ramp-delay = <200>; 431 regulator-ramp-delay = <0>; 432 }; 433 434 vreg_s6a_0p87: s6 { 435 regulator-min-microvolt = <504000>; 436 regulator-max-microvolt = <992000>; 437 regulator-enable-ramp-delay = <150>; 438 regulator-ramp-delay = <0>; 439 }; 440 441 /* LDOs */ 442 vreg_l1a_1p225: l1 { 443 regulator-min-microvolt = <1226000>; 444 regulator-max-microvolt = <1250000>; 445 regulator-enable-ramp-delay = <250>; 446 regulator-ramp-delay = <0>; 447 regulator-allow-set-load; 448 }; 449 450 vreg_l2a_1p0: l2 { 451 regulator-min-microvolt = <944000>; 452 regulator-max-microvolt = <1008000>; 453 regulator-enable-ramp-delay = <250>; 454 regulator-ramp-delay = <0>; 455 }; 456 457 vreg_l3a_1p0: l3 { 458 regulator-min-microvolt = <944000>; 459 regulator-max-microvolt = <1008000>; 460 regulator-enable-ramp-delay = <250>; 461 regulator-ramp-delay = <0>; 462 }; 463 464 vreg_l5a_0p848: l5 { 465 regulator-min-microvolt = <800000>; 466 regulator-max-microvolt = <952000>; 467 regulator-enable-ramp-delay = <250>; 468 regulator-ramp-delay = <0>; 469 }; 470 471 vreg_l6a_1p3: l6 { 472 regulator-min-microvolt = <1304000>; 473 regulator-max-microvolt = <1368000>; 474 regulator-allow-set-load; 475 regulator-enable-ramp-delay = <250>; 476 regulator-ramp-delay = <0>; 477 }; 478 479 vreg_l7a_1p2: l7 { 480 regulator-min-microvolt = <1200000>; 481 regulator-max-microvolt = <1200000>; 482 regulator-enable-ramp-delay = <250>; 483 regulator-ramp-delay = <0>; 484 }; 485 486 vreg_l8a_1p8: l8 { 487 regulator-min-microvolt = <1800000>; 488 regulator-max-microvolt = <1800000>; 489 regulator-enable-ramp-delay = <250>; 490 regulator-ramp-delay = <0>; 491 regulator-system-load = <325000>; 492 regulator-allow-set-load; 493 }; 494 495 vreg_l9a_1p8: l9 { 496 regulator-min-microvolt = <1804000>; 497 regulator-max-microvolt = <1896000>; 498 regulator-enable-ramp-delay = <250>; 499 regulator-ramp-delay = <0>; 500 regulator-allow-set-load; 501 }; 502 503 vreg_l10a_1p8: l10 { 504 regulator-min-microvolt = <1800000>; 505 regulator-max-microvolt = <1944000>; 506 regulator-enable-ramp-delay = <250>; 507 regulator-ramp-delay = <0>; 508 regulator-allow-set-load; 509 }; 510 511 vreg_l11a_1p8: l11 { 512 regulator-min-microvolt = <1784000>; 513 regulator-max-microvolt = <1944000>; 514 regulator-enable-ramp-delay = <250>; 515 regulator-ramp-delay = <0>; 516 }; 517 518 vreg_l12a_1p8: l12 { 519 regulator-min-microvolt = <1800000>; 520 regulator-max-microvolt = <1944000>; 521 regulator-enable-ramp-delay = <250>; 522 regulator-ramp-delay = <0>; 523 }; 524 525 /* This gives power to the LPDDR4: never turn it off! */ 526 vreg_l13a_1p8: l13 { 527 regulator-min-microvolt = <1800000>; 528 regulator-max-microvolt = <1944000>; 529 regulator-enable-ramp-delay = <250>; 530 regulator-ramp-delay = <0>; 531 regulator-boot-on; 532 regulator-always-on; 533 }; 534 535 vreg_l14a_1p8: l14 { 536 regulator-min-microvolt = <1710000>; 537 regulator-max-microvolt = <1904000>; 538 regulator-enable-ramp-delay = <250>; 539 regulator-ramp-delay = <0>; 540 }; 541 542 vreg_l15a_1p8: l15 { 543 regulator-min-microvolt = <1648000>; 544 regulator-max-microvolt = <2952000>; 545 regulator-enable-ramp-delay = <250>; 546 regulator-ramp-delay = <0>; 547 }; 548 549 /* L16A (2.70V) is unused */ 550 551 vreg_l17a_1p8: l17 { 552 regulator-min-microvolt = <1648000>; 553 regulator-max-microvolt = <2952000>; 554 regulator-enable-ramp-delay = <250>; 555 regulator-ramp-delay = <0>; 556 }; 557 558 vreg_l18a_1v8: l18 { 559 regulator-min-microvolt = <1800000>; 560 regulator-max-microvolt = <1800000>; 561 regulator-enable-ramp-delay = <250>; 562 regulator-ramp-delay = <10>; 563 regulator-min-microamp = <200>; 564 regulator-max-microamp = <50000>; 565 regulator-system-load = <10000>; 566 regulator-allow-set-load; 567 }; 568 569 vreg_l19a_3p3: l19 { 570 regulator-min-microvolt = <3312000>; 571 regulator-max-microvolt = <3400000>; 572 regulator-enable-ramp-delay = <250>; 573 regulator-ramp-delay = <0>; 574 regulator-allow-set-load; 575 }; 576 }; 577}; 578 579&sdc2_state_on { 580 sd-cd-pins { 581 pins = "gpio54"; 582 function = "gpio"; 583 bias-pull-up; 584 drive-strength = <2>; 585 }; 586}; 587 588&sdc2_state_off { 589 sd-cd-pins { 590 pins = "gpio54"; 591 function = "gpio"; 592 bias-disable; 593 drive-strength = <2>; 594 }; 595}; 596 597&sdhc_1 { 598 status = "okay"; 599 supports-cqe; 600 601 /* SoMC Nile platform's eMMC doesn't support HS200 mode */ 602 mmc-ddr-1_8v; 603 mmc-hs400-1_8v; 604 mmc-hs400-enhanced-strobe; 605 606 vmmc-supply = <&vreg_l4b_2p95>; 607 vqmmc-supply = <&vreg_l8a_1p8>; 608}; 609 610&sdhc_2 { 611 status = "okay"; 612 613 vmmc-supply = <&vreg_l5b_2p95>; 614 vqmmc-supply = <&vreg_l2b_2p95>; 615}; 616 617&tlmm { 618 gpio-reserved-ranges = <8 4>; 619 620 ts_int_active: ts-int-active-state { 621 pins = "gpio45"; 622 function = "gpio"; 623 drive-strength = <8>; 624 bias-pull-up; 625 }; 626 627 ts_lcd_id_active: ts-lcd-id-active-state { 628 pins = "gpio56"; 629 function = "gpio"; 630 drive-strength = <8>; 631 bias-disable; 632 }; 633 634 imx300_vana_default: imx300-vana-default-state { 635 pins = "gpio50"; 636 function = "gpio"; 637 bias-disable; 638 drive-strength = <2>; 639 }; 640 641 imx219_vana_default: imx219-vana-default-state { 642 pins = "gpio51"; 643 function = "gpio"; 644 bias-disable; 645 drive-strength = <2>; 646 }; 647 648 cam_vdig_default: cam-vdig-default-state { 649 pins = "gpio52"; 650 function = "gpio"; 651 bias-disable; 652 drive-strength = <2>; 653 }; 654}; 655 656&usb3 { 657 status = "okay"; 658}; 659 660&usb3_dwc3 { 661 dr_mode = "peripheral"; 662 extcon = <&extcon_usb>; 663}; 664