1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * sc7280 IDP board device tree source (common between SKU1 and SKU2)
4 *
5 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
6 */
7
8#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include "sc7280.dtsi"
11#include "pm7325.dtsi"
12#include "pm8350c.dtsi"
13#include "pmk8350.dtsi"
14
15#include "sc7280-chrome-common.dtsi"
16#include "sc7280-herobrine-lte-sku.dtsi"
17
18/ {
19	aliases {
20		bluetooth0 = &bluetooth;
21		serial1 = &uart7;
22		wifi0 = &wifi;
23	};
24
25	max98360a: audio-codec-0 {
26		compatible = "maxim,max98360a";
27		pinctrl-names = "default";
28		pinctrl-0 = <&amp_en>;
29		sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
30		#sound-dai-cells = <0>;
31	};
32
33	wcd9385: audio-codec-1 {
34		compatible = "qcom,wcd9385-codec";
35		pinctrl-names = "default", "sleep";
36		pinctrl-0 = <&wcd_reset_n>;
37		pinctrl-1 = <&wcd_reset_n_sleep>;
38
39		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
40
41		qcom,rx-device = <&wcd_rx>;
42		qcom,tx-device = <&wcd_tx>;
43
44		vdd-rxtx-supply = <&vreg_l18b_1p8>;
45		vdd-io-supply = <&vreg_l18b_1p8>;
46		vdd-buck-supply = <&vreg_l17b_1p8>;
47		vdd-mic-bias-supply = <&vreg_bob>;
48
49		qcom,micbias1-microvolt = <1800000>;
50		qcom,micbias2-microvolt = <1800000>;
51		qcom,micbias3-microvolt = <1800000>;
52		qcom,micbias4-microvolt = <1800000>;
53
54		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
55							  500000 500000 500000>;
56		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
57		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
58		#sound-dai-cells = <1>;
59	};
60
61	gpio-keys {
62		compatible = "gpio-keys";
63		label = "gpio-keys";
64
65		pinctrl-names = "default";
66		pinctrl-0 = <&key_vol_up_default>;
67
68		key-volume-up {
69			label = "volume_up";
70			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
71			linux,input-type = <1>;
72			linux,code = <KEY_VOLUMEUP>;
73			wakeup-source;
74			debounce-interval = <15>;
75			linux,can-disable;
76		};
77	};
78
79	nvme_3v3_regulator: nvme-3v3-regulator {
80		compatible = "regulator-fixed";
81		regulator-name = "VLDO_3V3";
82
83		regulator-min-microvolt = <3300000>;
84		regulator-max-microvolt = <3300000>;
85
86		enable-active-high;
87		pinctrl-names = "default";
88		pinctrl-0 = <&nvme_pwren>;
89	};
90
91	sound: sound {
92		compatible = "google,sc7280-herobrine";
93		model = "sc7280-wcd938x-max98360a-1mic";
94
95		audio-routing =
96			"IN1_HPHL", "HPHL_OUT",
97			"IN2_HPHR", "HPHR_OUT",
98			"AMIC1", "MIC BIAS1",
99			"AMIC2", "MIC BIAS2",
100			"VA DMIC0", "MIC BIAS3",
101			"VA DMIC1", "MIC BIAS3",
102			"VA DMIC2", "MIC BIAS1",
103			"VA DMIC3", "MIC BIAS1",
104			"TX SWR_ADC0", "ADC1_OUTPUT",
105			"TX SWR_ADC1", "ADC2_OUTPUT",
106			"TX SWR_ADC2", "ADC3_OUTPUT",
107			"TX SWR_DMIC0", "DMIC1_OUTPUT",
108			"TX SWR_DMIC1", "DMIC2_OUTPUT",
109			"TX SWR_DMIC2", "DMIC3_OUTPUT",
110			"TX SWR_DMIC3", "DMIC4_OUTPUT",
111			"TX SWR_DMIC4", "DMIC5_OUTPUT",
112			"TX SWR_DMIC5", "DMIC6_OUTPUT",
113			"TX SWR_DMIC6", "DMIC7_OUTPUT",
114			"TX SWR_DMIC7", "DMIC8_OUTPUT";
115
116		#address-cells = <1>;
117		#size-cells = <0>;
118
119		dai-link@0 {
120			link-name = "MAX98360A";
121			reg = <0>;
122
123			cpu {
124				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
125			};
126
127			codec {
128				sound-dai = <&max98360a>;
129			};
130		};
131
132		dai-link@1 {
133			link-name = "DisplayPort";
134			reg = <1>;
135
136			cpu {
137				sound-dai = <&lpass_cpu LPASS_DP_RX>;
138			};
139
140			codec {
141				sound-dai = <&mdss_dp>;
142			};
143		};
144
145		dai-link@2 {
146			link-name = "WCD9385 Playback";
147			reg = <2>;
148
149			cpu {
150				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
151			};
152
153			codec {
154				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
155			};
156		};
157
158		dai-link@3 {
159			link-name = "WCD9385 Capture";
160			reg = <3>;
161
162			cpu {
163				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
164			};
165
166			codec {
167				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
168			};
169		};
170
171		dai-link@4 {
172			link-name = "DMIC";
173			reg = <4>;
174
175			cpu {
176				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
177			};
178
179			codec {
180				sound-dai = <&lpass_va_macro 0>;
181			};
182		};
183	};
184};
185
186&apps_rsc {
187	regulators-0 {
188		compatible = "qcom,pm7325-rpmh-regulators";
189		qcom,pmic-id = "b";
190
191		vreg_s1b_1p8: smps1 {
192			regulator-min-microvolt = <1856000>;
193			regulator-max-microvolt = <2040000>;
194		};
195
196		vreg_s7b_0p9: smps7 {
197			regulator-min-microvolt = <535000>;
198			regulator-max-microvolt = <1120000>;
199		};
200
201		vreg_s8b_1p2: smps8 {
202			regulator-min-microvolt = <1256000>;
203			regulator-max-microvolt = <1500000>;
204		};
205
206		vreg_l1b_0p8: ldo1 {
207			regulator-min-microvolt = <825000>;
208			regulator-max-microvolt = <925000>;
209		};
210
211		vreg_l2b_3p0: ldo2 {
212			regulator-min-microvolt = <2700000>;
213			regulator-max-microvolt = <3544000>;
214		};
215
216		vreg_l6b_1p2: ldo6 {
217			regulator-min-microvolt = <1140000>;
218			regulator-max-microvolt = <1260000>;
219		};
220
221		vreg_l7b_2p9: ldo7 {
222			regulator-min-microvolt = <2960000>;
223			regulator-max-microvolt = <2960000>;
224		};
225
226		vreg_l8b_0p9: ldo8 {
227			regulator-min-microvolt = <870000>;
228			regulator-max-microvolt = <970000>;
229		};
230
231		vreg_l9b_1p2: ldo9 {
232			regulator-min-microvolt = <1080000>;
233			regulator-max-microvolt = <1304000>;
234		};
235
236		vreg_l11b_1p7: ldo11 {
237			regulator-min-microvolt = <1504000>;
238			regulator-max-microvolt = <2000000>;
239		};
240
241		vreg_l12b_0p8: ldo12 {
242			regulator-min-microvolt = <751000>;
243			regulator-max-microvolt = <824000>;
244		};
245
246		vreg_l13b_0p8: ldo13 {
247			regulator-min-microvolt = <530000>;
248			regulator-max-microvolt = <824000>;
249		};
250
251		vreg_l14b_1p2: ldo14 {
252			regulator-min-microvolt = <1080000>;
253			regulator-max-microvolt = <1304000>;
254		};
255
256		vreg_l15b_0p8: ldo15 {
257			regulator-min-microvolt = <765000>;
258			regulator-max-microvolt = <1020000>;
259		};
260
261		vreg_l16b_1p2: ldo16 {
262			regulator-min-microvolt = <1100000>;
263			regulator-max-microvolt = <1300000>;
264		};
265
266		vreg_l17b_1p8: ldo17 {
267			regulator-min-microvolt = <1700000>;
268			regulator-max-microvolt = <1900000>;
269		};
270
271		vreg_l18b_1p8: ldo18 {
272			regulator-min-microvolt = <1800000>;
273			regulator-max-microvolt = <2000000>;
274		};
275
276		vreg_l19b_1p8: ldo19 {
277			regulator-min-microvolt = <1800000>;
278			regulator-max-microvolt = <1800000>;
279		};
280	};
281
282	regulators-1 {
283		compatible = "qcom,pm8350c-rpmh-regulators";
284		qcom,pmic-id = "c";
285
286		vreg_s1c_2p2: smps1 {
287			regulator-min-microvolt = <2190000>;
288			regulator-max-microvolt = <2210000>;
289		};
290
291		vreg_s9c_1p0: smps9 {
292			regulator-min-microvolt = <1010000>;
293			regulator-max-microvolt = <1170000>;
294		};
295
296		vreg_l1c_1p8: ldo1 {
297			regulator-min-microvolt = <1800000>;
298			regulator-max-microvolt = <1980000>;
299		};
300
301		vreg_l2c_1p8: ldo2 {
302			regulator-min-microvolt = <1620000>;
303			regulator-max-microvolt = <1980000>;
304		};
305
306		vreg_l3c_3p0: ldo3 {
307			regulator-min-microvolt = <2800000>;
308			regulator-max-microvolt = <3540000>;
309		};
310
311		vreg_l4c_1p8: ldo4 {
312			regulator-min-microvolt = <1620000>;
313			regulator-max-microvolt = <3300000>;
314		};
315
316		vreg_l5c_1p8: ldo5 {
317			regulator-min-microvolt = <1620000>;
318			regulator-max-microvolt = <3300000>;
319		};
320
321		vreg_l6c_2p9: ldo6 {
322			regulator-min-microvolt = <1800000>;
323			regulator-max-microvolt = <2950000>;
324		};
325
326		vreg_l7c_3p0: ldo7 {
327			regulator-min-microvolt = <3000000>;
328			regulator-max-microvolt = <3544000>;
329		};
330
331		vreg_l8c_1p8: ldo8 {
332			regulator-min-microvolt = <1620000>;
333			regulator-max-microvolt = <2000000>;
334		};
335
336		vreg_l9c_2p9: ldo9 {
337			regulator-min-microvolt = <2960000>;
338			regulator-max-microvolt = <2960000>;
339		};
340
341		vreg_l10c_0p8: ldo10 {
342			regulator-min-microvolt = <720000>;
343			regulator-max-microvolt = <1050000>;
344		};
345
346		vreg_l11c_2p8: ldo11 {
347			regulator-min-microvolt = <2800000>;
348			regulator-max-microvolt = <3544000>;
349		};
350
351		vreg_l12c_1p8: ldo12 {
352			regulator-min-microvolt = <1650000>;
353			regulator-max-microvolt = <2000000>;
354		};
355
356		vreg_l13c_3p0: ldo13 {
357			regulator-min-microvolt = <2700000>;
358			regulator-max-microvolt = <3544000>;
359		};
360
361		vreg_bob: bob {
362			regulator-min-microvolt = <3008000>;
363			regulator-max-microvolt = <3960000>;
364		};
365	};
366};
367
368&gpi_dma0 {
369	status = "okay";
370};
371
372&gpi_dma1 {
373	status = "okay";
374};
375
376&lpass_cpu {
377	status = "okay";
378
379	pinctrl-names = "default";
380	pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
381
382	dai-link@1 {
383		reg = <MI2S_SECONDARY>;
384		qcom,playback-sd-lines = <0>;
385	};
386
387	dai-link@5 {
388		reg = <LPASS_DP_RX>;
389	};
390
391	dai-link@6 {
392		reg = <LPASS_CDC_DMA_RX0>;
393	};
394
395	dai-link@19 {
396		reg = <LPASS_CDC_DMA_TX3>;
397	};
398
399	dai-link@25 {
400		reg = <LPASS_CDC_DMA_VA_TX0>;
401	};
402};
403
404&lpass_rx_macro {
405	status = "okay";
406};
407
408&lpass_tx_macro {
409	status = "okay";
410};
411
412&lpass_va_macro {
413	status = "okay";
414	vdd-micb-supply = <&vreg_bob>;
415};
416
417&pcie1 {
418	status = "okay";
419	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
420
421	vddpe-3v3-supply = <&nvme_3v3_regulator>;
422
423	pinctrl-names = "default";
424	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
425};
426
427&pcie1_phy {
428	status = "okay";
429
430	vdda-phy-supply = <&vreg_l10c_0p8>;
431	vdda-pll-supply = <&vreg_l6b_1p2>;
432};
433
434&pmk8350_vadc {
435	channel@3 {
436		reg = <PMK8350_ADC7_DIE_TEMP>;
437		label = "pmk8350_die_temp";
438		qcom,pre-scaling = <1 1>;
439	};
440};
441
442&qfprom {
443	vcc-supply = <&vreg_l1c_1p8>;
444};
445
446&qupv3_id_0 {
447	status = "okay";
448};
449
450&qupv3_id_1 {
451	status = "okay";
452};
453
454&sdhc_1 {
455	status = "okay";
456
457	non-removable;
458	no-sd;
459	no-sdio;
460
461	vmmc-supply = <&vreg_l7b_2p9>;
462	vqmmc-supply = <&vreg_l19b_1p8>;
463};
464
465&sdhc_2 {
466	status = "okay";
467
468	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
469	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
470
471	vmmc-supply = <&vreg_l9c_2p9>;
472	vqmmc-supply = <&vreg_l6c_2p9>;
473
474	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
475};
476
477&swr0 {
478	status = "okay";
479
480	wcd_rx: codec@0,4 {
481		compatible = "sdw20217010d00";
482		reg = <0 4>;
483		qcom,rx-port-mapping = <1 2 3 4 5>;
484	};
485};
486
487&swr1 {
488	status = "okay";
489
490	wcd_tx: codec@0,3 {
491		compatible = "sdw20217010d00";
492		reg = <0 3>;
493		qcom,tx-port-mapping = <1 2 3 4>;
494	};
495};
496
497&uart5 {
498	compatible = "qcom,geni-debug-uart";
499	status = "okay";
500};
501
502&usb_1 {
503	status = "okay";
504};
505
506&usb_1_dwc3 {
507	dr_mode = "host";
508};
509
510&usb_1_hsphy {
511	status = "okay";
512
513	vdda-pll-supply = <&vreg_l10c_0p8>;
514	vdda33-supply = <&vreg_l2b_3p0>;
515	vdda18-supply = <&vreg_l1c_1p8>;
516	qcom,hs-rise-fall-time-bp = <0>;
517	qcom,squelch-detector-bp = <(-2090)>;
518	qcom,hs-disconnect-bp = <1743>;
519	qcom,hs-amplitude-bp = <1780>;
520	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
521	qcom,hs-output-impedance-micro-ohms = <2600000>;
522};
523
524&usb_1_qmpphy {
525	status = "okay";
526
527	vdda-phy-supply = <&vreg_l6b_1p2>;
528	vdda-pll-supply = <&vreg_l1b_0p8>;
529};
530
531&uart7 {
532	status = "okay";
533
534	/delete-property/interrupts;
535	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
536				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
537	pinctrl-names = "default", "sleep";
538	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
539
540	bluetooth: bluetooth {
541		compatible = "qcom,wcn6750-bt";
542		pinctrl-names = "default";
543		pinctrl-0 = <&bt_en>, <&sw_ctrl>;
544		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
545		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
546		vddaon-supply = <&vreg_s7b_0p9>;
547		vddbtcxmx-supply = <&vreg_s7b_0p9>;
548		vddrfacmn-supply = <&vreg_s7b_0p9>;
549		vddrfa0p8-supply = <&vreg_s7b_0p9>;
550		vddrfa1p7-supply = <&vreg_s1b_1p8>;
551		vddrfa1p2-supply = <&vreg_s8b_1p2>;
552		vddrfa2p2-supply = <&vreg_s1c_2p2>;
553		vddasd-supply = <&vreg_l11c_2p8>;
554		max-speed = <3200000>;
555	};
556};
557
558/* PINCTRL - additions to nodes defined in sc7280.dtsi */
559
560&dp_hot_plug_det {
561	bias-disable;
562};
563
564&lpass_dmic01_clk {
565	drive-strength = <8>;
566	bias-disable;
567};
568
569&lpass_dmic01_data {
570	bias-pull-down;
571};
572
573&lpass_dmic23_clk {
574	drive-strength = <8>;
575	bias-disable;
576};
577
578&lpass_dmic23_data {
579	bias-pull-down;
580};
581
582&lpass_rx_swr_clk {
583	drive-strength = <2>;
584	slew-rate = <1>;
585	bias-disable;
586};
587
588&lpass_rx_swr_data {
589	drive-strength = <2>;
590	slew-rate = <1>;
591	bias-bus-hold;
592};
593
594&lpass_tx_swr_clk {
595	drive-strength = <2>;
596	slew-rate = <1>;
597	bias-disable;
598};
599
600&lpass_tx_swr_data {
601	drive-strength = <2>;
602	slew-rate = <1>;
603	bias-bus-hold;
604};
605
606&mi2s1_data0 {
607	drive-strength = <6>;
608	bias-disable;
609};
610
611&mi2s1_sclk {
612	drive-strength = <6>;
613	bias-disable;
614};
615
616&mi2s1_ws {
617	drive-strength = <6>;
618};
619
620&pm7325_gpios {
621	key_vol_up_default: key-vol-up-state {
622		pins = "gpio6";
623		function = "normal";
624		input-enable;
625		bias-pull-up;
626		power-source = <0>;
627		qcom,drive-strength = <3>;
628	};
629};
630
631&pcie1_clkreq_n {
632	bias-pull-up;
633	drive-strength = <2>;
634};
635
636&qspi_cs0 {
637	bias-disable;		/* External pullup */
638};
639
640&qspi_clk {
641	bias-pull-down;		/* No external pulls or external pulldown */
642};
643
644&qspi_data0 {
645	bias-pull-down;		/* No external pulls or external pulldown */
646};
647
648&qspi_data1 {
649	bias-pull-down;		/* No external pulls or external pulldown */
650};
651
652&qup_uart5_tx {
653	drive-strength = <2>;
654	bias-disable;
655};
656
657&qup_uart5_rx {
658	drive-strength = <2>;
659	bias-pull-up;
660};
661
662&qup_uart7_cts {
663	/*
664	 * Configure a bias-bus-hold on CTS to lower power
665	 * usage when Bluetooth is turned off. Bus hold will
666	 * maintain a low power state regardless of whether
667	 * the Bluetooth module drives the pin in either
668	 * direction or leaves the pin fully unpowered.
669	 */
670	bias-bus-hold;
671};
672
673&qup_uart7_rts {
674	/* We'll drive RTS, so no pull */
675	drive-strength = <2>;
676	bias-disable;
677};
678
679&qup_uart7_tx {
680	/* We'll drive TX, so no pull */
681	drive-strength = <2>;
682	bias-disable;
683};
684
685&qup_uart7_rx {
686	/*
687	 * Configure a pull-up on RX. This is needed to avoid
688	 * garbage data when the TX pin of the Bluetooth module is
689	 * in tri-state (module powered off or not driving the
690	 * signal yet).
691	 */
692	bias-pull-up;
693};
694
695&sdc1_clk {
696	bias-disable;
697	drive-strength = <16>;
698};
699
700&sdc1_cmd {
701	bias-pull-up;
702	drive-strength = <10>;
703};
704
705&sdc1_data {
706	bias-pull-up;
707	drive-strength = <10>;
708};
709
710&sdc1_rclk {
711	bias-pull-down;
712};
713
714&sdc2_clk {
715	bias-disable;
716	drive-strength = <16>;
717};
718
719&sdc2_cmd {
720	bias-pull-up;
721	drive-strength = <10>;
722};
723
724&sdc2_data {
725	bias-pull-up;
726	drive-strength = <10>;
727};
728
729&tlmm {
730	amp_en: amp-en-state {
731		pins = "gpio63";
732		function = "gpio";
733		bias-pull-down;
734		drive-strength = <2>;
735	};
736
737	bt_en: bt-en-state {
738		pins = "gpio85";
739		function = "gpio";
740		output-low;
741		bias-disable;
742	};
743
744	nvme_pwren: nvme-pwren-state {
745		function = "gpio";
746	};
747
748	pcie1_reset_n: pcie1-reset-n-state {
749		pins = "gpio2";
750		function = "gpio";
751
752		drive-strength = <16>;
753		output-low;
754		bias-disable;
755	};
756
757	pcie1_wake_n: pcie1-wake-n-state {
758		pins = "gpio3";
759		function = "gpio";
760
761		drive-strength = <2>;
762		bias-pull-up;
763	};
764
765	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
766		pins = "gpio28";
767		function = "gpio";
768		/*
769		 * Configure a bias-bus-hold on CTS to lower power
770		 * usage when Bluetooth is turned off. Bus hold will
771		 * maintain a low power state regardless of whether
772		 * the Bluetooth module drives the pin in either
773		 * direction or leaves the pin fully unpowered.
774		 */
775		bias-bus-hold;
776	};
777
778	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
779		pins = "gpio29";
780		function = "gpio";
781		/*
782		 * Configure pull-down on RTS. As RTS is active low
783		 * signal, pull it low to indicate the BT SoC that it
784		 * can wakeup the system anytime from suspend state by
785		 * pulling RX low (by sending wakeup bytes).
786		 */
787		bias-pull-down;
788	};
789
790	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
791		pins = "gpio30";
792		function = "gpio";
793		/*
794		 * Configure pull-up on TX when it isn't actively driven
795		 * to prevent BT SoC from receiving garbage during sleep.
796		 */
797		bias-pull-up;
798	};
799
800	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
801		pins = "gpio31";
802		function = "gpio";
803		/*
804		 * Configure a pull-up on RX. This is needed to avoid
805		 * garbage data when the TX pin of the Bluetooth module
806		 * is floating which may cause spurious wakeups.
807		 */
808		bias-pull-up;
809	};
810
811	sd_cd: sd-cd-state {
812		pins = "gpio91";
813		function = "gpio";
814		bias-pull-up;
815	};
816
817	sw_ctrl: sw-ctrl-state {
818		pins = "gpio86";
819		function = "gpio";
820		bias-pull-down;
821	};
822
823	wcd_reset_n: wcd-reset-n-state {
824		pins = "gpio83";
825		function = "gpio";
826		drive-strength = <8>;
827	};
828
829	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
830		pins = "gpio83";
831		function = "gpio";
832		drive-strength = <8>;
833		bias-disable;
834	};
835};
836