xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sc7180.dtsi (revision d47a97bd)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * SC7180 SoC device tree source
4 *
5 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
6 */
7
8#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
9#include <dt-bindings/clock/qcom,gcc-sc7180.h>
10#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
11#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
12#include <dt-bindings/clock/qcom,rpmh.h>
13#include <dt-bindings/clock/qcom,videocc-sc7180.h>
14#include <dt-bindings/interconnect/qcom,osm-l3.h>
15#include <dt-bindings/interconnect/qcom,sc7180.h>
16#include <dt-bindings/interrupt-controller/arm-gic.h>
17#include <dt-bindings/phy/phy-qcom-qusb2.h>
18#include <dt-bindings/power/qcom-rpmpd.h>
19#include <dt-bindings/reset/qcom,sdm845-aoss.h>
20#include <dt-bindings/reset/qcom,sdm845-pdc.h>
21#include <dt-bindings/soc/qcom,rpmh-rsc.h>
22#include <dt-bindings/thermal/thermal.h>
23
24/ {
25	interrupt-parent = <&intc>;
26
27	#address-cells = <2>;
28	#size-cells = <2>;
29
30	aliases {
31		mmc1 = &sdhc_1;
32		mmc2 = &sdhc_2;
33		i2c0 = &i2c0;
34		i2c1 = &i2c1;
35		i2c2 = &i2c2;
36		i2c3 = &i2c3;
37		i2c4 = &i2c4;
38		i2c5 = &i2c5;
39		i2c6 = &i2c6;
40		i2c7 = &i2c7;
41		i2c8 = &i2c8;
42		i2c9 = &i2c9;
43		i2c10 = &i2c10;
44		i2c11 = &i2c11;
45		spi0 = &spi0;
46		spi1 = &spi1;
47		spi3 = &spi3;
48		spi5 = &spi5;
49		spi6 = &spi6;
50		spi8 = &spi8;
51		spi10 = &spi10;
52		spi11 = &spi11;
53	};
54
55	chosen { };
56
57	clocks {
58		xo_board: xo-board {
59			compatible = "fixed-clock";
60			clock-frequency = <38400000>;
61			#clock-cells = <0>;
62		};
63
64		sleep_clk: sleep-clk {
65			compatible = "fixed-clock";
66			clock-frequency = <32764>;
67			#clock-cells = <0>;
68		};
69	};
70
71	cpus {
72		#address-cells = <2>;
73		#size-cells = <0>;
74
75		CPU0: cpu@0 {
76			device_type = "cpu";
77			compatible = "qcom,kryo468";
78			reg = <0x0 0x0>;
79			enable-method = "psci";
80			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
81					   &LITTLE_CPU_SLEEP_1
82					   &CLUSTER_SLEEP_0>;
83			capacity-dmips-mhz = <415>;
84			dynamic-power-coefficient = <137>;
85			operating-points-v2 = <&cpu0_opp_table>;
86			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
87					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
88			next-level-cache = <&L2_0>;
89			#cooling-cells = <2>;
90			qcom,freq-domain = <&cpufreq_hw 0>;
91			L2_0: l2-cache {
92				compatible = "cache";
93				cache-level = <2>;
94				next-level-cache = <&L3_0>;
95				L3_0: l3-cache {
96					compatible = "cache";
97					cache-level = <3>;
98				};
99			};
100		};
101
102		CPU1: cpu@100 {
103			device_type = "cpu";
104			compatible = "qcom,kryo468";
105			reg = <0x0 0x100>;
106			enable-method = "psci";
107			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
108					   &LITTLE_CPU_SLEEP_1
109					   &CLUSTER_SLEEP_0>;
110			capacity-dmips-mhz = <415>;
111			dynamic-power-coefficient = <137>;
112			next-level-cache = <&L2_100>;
113			operating-points-v2 = <&cpu0_opp_table>;
114			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
115					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
116			#cooling-cells = <2>;
117			qcom,freq-domain = <&cpufreq_hw 0>;
118			L2_100: l2-cache {
119				compatible = "cache";
120				cache-level = <2>;
121				next-level-cache = <&L3_0>;
122			};
123		};
124
125		CPU2: cpu@200 {
126			device_type = "cpu";
127			compatible = "qcom,kryo468";
128			reg = <0x0 0x200>;
129			enable-method = "psci";
130			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
131					   &LITTLE_CPU_SLEEP_1
132					   &CLUSTER_SLEEP_0>;
133			capacity-dmips-mhz = <415>;
134			dynamic-power-coefficient = <137>;
135			next-level-cache = <&L2_200>;
136			operating-points-v2 = <&cpu0_opp_table>;
137			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
138					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
139			#cooling-cells = <2>;
140			qcom,freq-domain = <&cpufreq_hw 0>;
141			L2_200: l2-cache {
142				compatible = "cache";
143				cache-level = <2>;
144				next-level-cache = <&L3_0>;
145			};
146		};
147
148		CPU3: cpu@300 {
149			device_type = "cpu";
150			compatible = "qcom,kryo468";
151			reg = <0x0 0x300>;
152			enable-method = "psci";
153			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
154					   &LITTLE_CPU_SLEEP_1
155					   &CLUSTER_SLEEP_0>;
156			capacity-dmips-mhz = <415>;
157			dynamic-power-coefficient = <137>;
158			next-level-cache = <&L2_300>;
159			operating-points-v2 = <&cpu0_opp_table>;
160			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
161					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
162			#cooling-cells = <2>;
163			qcom,freq-domain = <&cpufreq_hw 0>;
164			L2_300: l2-cache {
165				compatible = "cache";
166				cache-level = <2>;
167				next-level-cache = <&L3_0>;
168			};
169		};
170
171		CPU4: cpu@400 {
172			device_type = "cpu";
173			compatible = "qcom,kryo468";
174			reg = <0x0 0x400>;
175			enable-method = "psci";
176			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
177					   &LITTLE_CPU_SLEEP_1
178					   &CLUSTER_SLEEP_0>;
179			capacity-dmips-mhz = <415>;
180			dynamic-power-coefficient = <137>;
181			next-level-cache = <&L2_400>;
182			operating-points-v2 = <&cpu0_opp_table>;
183			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
184					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
185			#cooling-cells = <2>;
186			qcom,freq-domain = <&cpufreq_hw 0>;
187			L2_400: l2-cache {
188				compatible = "cache";
189				cache-level = <2>;
190				next-level-cache = <&L3_0>;
191			};
192		};
193
194		CPU5: cpu@500 {
195			device_type = "cpu";
196			compatible = "qcom,kryo468";
197			reg = <0x0 0x500>;
198			enable-method = "psci";
199			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
200					   &LITTLE_CPU_SLEEP_1
201					   &CLUSTER_SLEEP_0>;
202			capacity-dmips-mhz = <415>;
203			dynamic-power-coefficient = <137>;
204			next-level-cache = <&L2_500>;
205			operating-points-v2 = <&cpu0_opp_table>;
206			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
207					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
208			#cooling-cells = <2>;
209			qcom,freq-domain = <&cpufreq_hw 0>;
210			L2_500: l2-cache {
211				compatible = "cache";
212				cache-level = <2>;
213				next-level-cache = <&L3_0>;
214			};
215		};
216
217		CPU6: cpu@600 {
218			device_type = "cpu";
219			compatible = "qcom,kryo468";
220			reg = <0x0 0x600>;
221			enable-method = "psci";
222			cpu-idle-states = <&BIG_CPU_SLEEP_0
223					   &BIG_CPU_SLEEP_1
224					   &CLUSTER_SLEEP_0>;
225			capacity-dmips-mhz = <1024>;
226			dynamic-power-coefficient = <480>;
227			next-level-cache = <&L2_600>;
228			operating-points-v2 = <&cpu6_opp_table>;
229			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
230					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
231			#cooling-cells = <2>;
232			qcom,freq-domain = <&cpufreq_hw 1>;
233			L2_600: l2-cache {
234				compatible = "cache";
235				cache-level = <2>;
236				next-level-cache = <&L3_0>;
237			};
238		};
239
240		CPU7: cpu@700 {
241			device_type = "cpu";
242			compatible = "qcom,kryo468";
243			reg = <0x0 0x700>;
244			enable-method = "psci";
245			cpu-idle-states = <&BIG_CPU_SLEEP_0
246					   &BIG_CPU_SLEEP_1
247					   &CLUSTER_SLEEP_0>;
248			capacity-dmips-mhz = <1024>;
249			dynamic-power-coefficient = <480>;
250			next-level-cache = <&L2_700>;
251			operating-points-v2 = <&cpu6_opp_table>;
252			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
253					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
254			#cooling-cells = <2>;
255			qcom,freq-domain = <&cpufreq_hw 1>;
256			L2_700: l2-cache {
257				compatible = "cache";
258				cache-level = <2>;
259				next-level-cache = <&L3_0>;
260			};
261		};
262
263		cpu-map {
264			cluster0 {
265				core0 {
266					cpu = <&CPU0>;
267				};
268
269				core1 {
270					cpu = <&CPU1>;
271				};
272
273				core2 {
274					cpu = <&CPU2>;
275				};
276
277				core3 {
278					cpu = <&CPU3>;
279				};
280
281				core4 {
282					cpu = <&CPU4>;
283				};
284
285				core5 {
286					cpu = <&CPU5>;
287				};
288
289				core6 {
290					cpu = <&CPU6>;
291				};
292
293				core7 {
294					cpu = <&CPU7>;
295				};
296			};
297		};
298
299		idle-states {
300			entry-method = "psci";
301
302			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
303				compatible = "arm,idle-state";
304				idle-state-name = "little-power-down";
305				arm,psci-suspend-param = <0x40000003>;
306				entry-latency-us = <549>;
307				exit-latency-us = <901>;
308				min-residency-us = <1774>;
309				local-timer-stop;
310			};
311
312			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
313				compatible = "arm,idle-state";
314				idle-state-name = "little-rail-power-down";
315				arm,psci-suspend-param = <0x40000004>;
316				entry-latency-us = <702>;
317				exit-latency-us = <915>;
318				min-residency-us = <4001>;
319				local-timer-stop;
320			};
321
322			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
323				compatible = "arm,idle-state";
324				idle-state-name = "big-power-down";
325				arm,psci-suspend-param = <0x40000003>;
326				entry-latency-us = <523>;
327				exit-latency-us = <1244>;
328				min-residency-us = <2207>;
329				local-timer-stop;
330			};
331
332			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
333				compatible = "arm,idle-state";
334				idle-state-name = "big-rail-power-down";
335				arm,psci-suspend-param = <0x40000004>;
336				entry-latency-us = <526>;
337				exit-latency-us = <1854>;
338				min-residency-us = <5555>;
339				local-timer-stop;
340			};
341
342			CLUSTER_SLEEP_0: cluster-sleep-0 {
343				compatible = "arm,idle-state";
344				idle-state-name = "cluster-power-down";
345				arm,psci-suspend-param = <0x40003444>;
346				entry-latency-us = <3263>;
347				exit-latency-us = <6562>;
348				min-residency-us = <9926>;
349				local-timer-stop;
350			};
351		};
352	};
353
354	firmware {
355		scm {
356			compatible = "qcom,scm-sc7180", "qcom,scm";
357		};
358	};
359
360	memory@80000000 {
361		device_type = "memory";
362		/* We expect the bootloader to fill in the size */
363		reg = <0 0x80000000 0 0>;
364	};
365
366	cpu0_opp_table: opp-table-cpu0 {
367		compatible = "operating-points-v2";
368		opp-shared;
369
370		cpu0_opp1: opp-300000000 {
371			opp-hz = /bits/ 64 <300000000>;
372			opp-peak-kBps = <1200000 4800000>;
373		};
374
375		cpu0_opp2: opp-576000000 {
376			opp-hz = /bits/ 64 <576000000>;
377			opp-peak-kBps = <1200000 4800000>;
378		};
379
380		cpu0_opp3: opp-768000000 {
381			opp-hz = /bits/ 64 <768000000>;
382			opp-peak-kBps = <1200000 4800000>;
383		};
384
385		cpu0_opp4: opp-1017600000 {
386			opp-hz = /bits/ 64 <1017600000>;
387			opp-peak-kBps = <1804000 8908800>;
388		};
389
390		cpu0_opp5: opp-1248000000 {
391			opp-hz = /bits/ 64 <1248000000>;
392			opp-peak-kBps = <2188000 12902400>;
393		};
394
395		cpu0_opp6: opp-1324800000 {
396			opp-hz = /bits/ 64 <1324800000>;
397			opp-peak-kBps = <2188000 12902400>;
398		};
399
400		cpu0_opp7: opp-1516800000 {
401			opp-hz = /bits/ 64 <1516800000>;
402			opp-peak-kBps = <3072000 15052800>;
403		};
404
405		cpu0_opp8: opp-1612800000 {
406			opp-hz = /bits/ 64 <1612800000>;
407			opp-peak-kBps = <3072000 15052800>;
408		};
409
410		cpu0_opp9: opp-1708800000 {
411			opp-hz = /bits/ 64 <1708800000>;
412			opp-peak-kBps = <3072000 15052800>;
413		};
414
415		cpu0_opp10: opp-1804800000 {
416			opp-hz = /bits/ 64 <1804800000>;
417			opp-peak-kBps = <4068000 22425600>;
418		};
419	};
420
421	cpu6_opp_table: opp-table-cpu6 {
422		compatible = "operating-points-v2";
423		opp-shared;
424
425		cpu6_opp1: opp-300000000 {
426			opp-hz = /bits/ 64 <300000000>;
427			opp-peak-kBps = <2188000 8908800>;
428		};
429
430		cpu6_opp2: opp-652800000 {
431			opp-hz = /bits/ 64 <652800000>;
432			opp-peak-kBps = <2188000 8908800>;
433		};
434
435		cpu6_opp3: opp-825600000 {
436			opp-hz = /bits/ 64 <825600000>;
437			opp-peak-kBps = <2188000 8908800>;
438		};
439
440		cpu6_opp4: opp-979200000 {
441			opp-hz = /bits/ 64 <979200000>;
442			opp-peak-kBps = <2188000 8908800>;
443		};
444
445		cpu6_opp5: opp-1113600000 {
446			opp-hz = /bits/ 64 <1113600000>;
447			opp-peak-kBps = <2188000 8908800>;
448		};
449
450		cpu6_opp6: opp-1267200000 {
451			opp-hz = /bits/ 64 <1267200000>;
452			opp-peak-kBps = <4068000 12902400>;
453		};
454
455		cpu6_opp7: opp-1555200000 {
456			opp-hz = /bits/ 64 <1555200000>;
457			opp-peak-kBps = <4068000 15052800>;
458		};
459
460		cpu6_opp8: opp-1708800000 {
461			opp-hz = /bits/ 64 <1708800000>;
462			opp-peak-kBps = <6220000 19353600>;
463		};
464
465		cpu6_opp9: opp-1843200000 {
466			opp-hz = /bits/ 64 <1843200000>;
467			opp-peak-kBps = <6220000 19353600>;
468		};
469
470		cpu6_opp10: opp-1900800000 {
471			opp-hz = /bits/ 64 <1900800000>;
472			opp-peak-kBps = <6220000 22425600>;
473		};
474
475		cpu6_opp11: opp-1996800000 {
476			opp-hz = /bits/ 64 <1996800000>;
477			opp-peak-kBps = <6220000 22425600>;
478		};
479
480		cpu6_opp12: opp-2112000000 {
481			opp-hz = /bits/ 64 <2112000000>;
482			opp-peak-kBps = <6220000 22425600>;
483		};
484
485		cpu6_opp13: opp-2208000000 {
486			opp-hz = /bits/ 64 <2208000000>;
487			opp-peak-kBps = <7216000 22425600>;
488		};
489
490		cpu6_opp14: opp-2323200000 {
491			opp-hz = /bits/ 64 <2323200000>;
492			opp-peak-kBps = <7216000 22425600>;
493		};
494
495		cpu6_opp15: opp-2400000000 {
496			opp-hz = /bits/ 64 <2400000000>;
497			opp-peak-kBps = <8532000 23347200>;
498		};
499
500		cpu6_opp16: opp-2553600000 {
501			opp-hz = /bits/ 64 <2553600000>;
502			opp-peak-kBps = <8532000 23347200>;
503		};
504	};
505
506	qspi_opp_table: opp-table-qspi {
507		compatible = "operating-points-v2";
508
509		opp-75000000 {
510			opp-hz = /bits/ 64 <75000000>;
511			required-opps = <&rpmhpd_opp_low_svs>;
512		};
513
514		opp-150000000 {
515			opp-hz = /bits/ 64 <150000000>;
516			required-opps = <&rpmhpd_opp_svs>;
517		};
518
519		opp-300000000 {
520			opp-hz = /bits/ 64 <300000000>;
521			required-opps = <&rpmhpd_opp_nom>;
522		};
523	};
524
525	qup_opp_table: opp-table-qup {
526		compatible = "operating-points-v2";
527
528		opp-75000000 {
529			opp-hz = /bits/ 64 <75000000>;
530			required-opps = <&rpmhpd_opp_low_svs>;
531		};
532
533		opp-100000000 {
534			opp-hz = /bits/ 64 <100000000>;
535			required-opps = <&rpmhpd_opp_svs>;
536		};
537
538		opp-128000000 {
539			opp-hz = /bits/ 64 <128000000>;
540			required-opps = <&rpmhpd_opp_nom>;
541		};
542	};
543
544	pmu {
545		compatible = "arm,armv8-pmuv3";
546		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
547	};
548
549	psci {
550		compatible = "arm,psci-1.0";
551		method = "smc";
552	};
553
554	reserved_memory: reserved-memory {
555		#address-cells = <2>;
556		#size-cells = <2>;
557		ranges;
558
559		hyp_mem: memory@80000000 {
560			reg = <0x0 0x80000000 0x0 0x600000>;
561			no-map;
562		};
563
564		xbl_mem: memory@80600000 {
565			reg = <0x0 0x80600000 0x0 0x200000>;
566			no-map;
567		};
568
569		aop_mem: memory@80800000 {
570			reg = <0x0 0x80800000 0x0 0x20000>;
571			no-map;
572		};
573
574		aop_cmd_db_mem: memory@80820000 {
575			reg = <0x0 0x80820000 0x0 0x20000>;
576			compatible = "qcom,cmd-db";
577			no-map;
578		};
579
580		sec_apps_mem: memory@808ff000 {
581			reg = <0x0 0x808ff000 0x0 0x1000>;
582			no-map;
583		};
584
585		smem_mem: memory@80900000 {
586			reg = <0x0 0x80900000 0x0 0x200000>;
587			no-map;
588		};
589
590		tz_mem: memory@80b00000 {
591			reg = <0x0 0x80b00000 0x0 0x3900000>;
592			no-map;
593		};
594
595		ipa_fw_mem: memory@8b700000 {
596			reg = <0 0x8b700000 0 0x10000>;
597			no-map;
598		};
599
600		rmtfs_mem: memory@94600000 {
601			compatible = "qcom,rmtfs-mem";
602			reg = <0x0 0x94600000 0x0 0x200000>;
603			no-map;
604
605			qcom,client-id = <1>;
606			qcom,vmid = <15>;
607		};
608	};
609
610	smem {
611		compatible = "qcom,smem";
612		memory-region = <&smem_mem>;
613		hwlocks = <&tcsr_mutex 3>;
614	};
615
616	smp2p-cdsp {
617		compatible = "qcom,smp2p";
618		qcom,smem = <94>, <432>;
619
620		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
621
622		mboxes = <&apss_shared 6>;
623
624		qcom,local-pid = <0>;
625		qcom,remote-pid = <5>;
626
627		cdsp_smp2p_out: master-kernel {
628			qcom,entry-name = "master-kernel";
629			#qcom,smem-state-cells = <1>;
630		};
631
632		cdsp_smp2p_in: slave-kernel {
633			qcom,entry-name = "slave-kernel";
634
635			interrupt-controller;
636			#interrupt-cells = <2>;
637		};
638	};
639
640	smp2p-lpass {
641		compatible = "qcom,smp2p";
642		qcom,smem = <443>, <429>;
643
644		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
645
646		mboxes = <&apss_shared 10>;
647
648		qcom,local-pid = <0>;
649		qcom,remote-pid = <2>;
650
651		adsp_smp2p_out: master-kernel {
652			qcom,entry-name = "master-kernel";
653			#qcom,smem-state-cells = <1>;
654		};
655
656		adsp_smp2p_in: slave-kernel {
657			qcom,entry-name = "slave-kernel";
658
659			interrupt-controller;
660			#interrupt-cells = <2>;
661		};
662	};
663
664	smp2p-mpss {
665		compatible = "qcom,smp2p";
666		qcom,smem = <435>, <428>;
667		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
668		mboxes = <&apss_shared 14>;
669		qcom,local-pid = <0>;
670		qcom,remote-pid = <1>;
671
672		modem_smp2p_out: master-kernel {
673			qcom,entry-name = "master-kernel";
674			#qcom,smem-state-cells = <1>;
675		};
676
677		modem_smp2p_in: slave-kernel {
678			qcom,entry-name = "slave-kernel";
679			interrupt-controller;
680			#interrupt-cells = <2>;
681		};
682
683		ipa_smp2p_out: ipa-ap-to-modem {
684			qcom,entry-name = "ipa";
685			#qcom,smem-state-cells = <1>;
686		};
687
688		ipa_smp2p_in: ipa-modem-to-ap {
689			qcom,entry-name = "ipa";
690			interrupt-controller;
691			#interrupt-cells = <2>;
692		};
693	};
694
695	soc: soc@0 {
696		#address-cells = <2>;
697		#size-cells = <2>;
698		ranges = <0 0 0 0 0x10 0>;
699		dma-ranges = <0 0 0 0 0x10 0>;
700		compatible = "simple-bus";
701
702		gcc: clock-controller@100000 {
703			compatible = "qcom,gcc-sc7180";
704			reg = <0 0x00100000 0 0x1f0000>;
705			clocks = <&rpmhcc RPMH_CXO_CLK>,
706				 <&rpmhcc RPMH_CXO_CLK_A>,
707				 <&sleep_clk>;
708			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
709			#clock-cells = <1>;
710			#reset-cells = <1>;
711			#power-domain-cells = <1>;
712			power-domains = <&rpmhpd SC7180_CX>;
713		};
714
715		qfprom: efuse@784000 {
716			compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
717			reg = <0 0x00784000 0 0x7a0>,
718			      <0 0x00780000 0 0x7a0>,
719			      <0 0x00782000 0 0x100>,
720			      <0 0x00786000 0 0x1fff>;
721
722			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
723			clock-names = "core";
724			#address-cells = <1>;
725			#size-cells = <1>;
726
727			qusb2p_hstx_trim: hstx-trim-primary@25b {
728				reg = <0x25b 0x1>;
729				bits = <1 3>;
730			};
731
732			gpu_speed_bin: gpu_speed_bin@1d2 {
733				reg = <0x1d2 0x2>;
734				bits = <5 8>;
735			};
736		};
737
738		sdhc_1: mmc@7c4000 {
739			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
740			reg = <0 0x007c4000 0 0x1000>,
741				<0 0x007c5000 0 0x1000>;
742			reg-names = "hc", "cqhci";
743
744			iommus = <&apps_smmu 0x60 0x0>;
745			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
746					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
747			interrupt-names = "hc_irq", "pwr_irq";
748
749			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
750				 <&gcc GCC_SDCC1_APPS_CLK>,
751				 <&rpmhcc RPMH_CXO_CLK>;
752			clock-names = "iface", "core", "xo";
753			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
754					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
755			interconnect-names = "sdhc-ddr","cpu-sdhc";
756			power-domains = <&rpmhpd SC7180_CX>;
757			operating-points-v2 = <&sdhc1_opp_table>;
758
759			bus-width = <8>;
760			non-removable;
761			supports-cqe;
762
763			mmc-ddr-1_8v;
764			mmc-hs200-1_8v;
765			mmc-hs400-1_8v;
766			mmc-hs400-enhanced-strobe;
767
768			status = "disabled";
769
770			sdhc1_opp_table: opp-table {
771				compatible = "operating-points-v2";
772
773				opp-100000000 {
774					opp-hz = /bits/ 64 <100000000>;
775					required-opps = <&rpmhpd_opp_low_svs>;
776					opp-peak-kBps = <1800000 600000>;
777					opp-avg-kBps = <100000 0>;
778				};
779
780				opp-384000000 {
781					opp-hz = /bits/ 64 <384000000>;
782					required-opps = <&rpmhpd_opp_nom>;
783					opp-peak-kBps = <5400000 1600000>;
784					opp-avg-kBps = <390000 0>;
785				};
786			};
787		};
788
789		qupv3_id_0: geniqup@8c0000 {
790			compatible = "qcom,geni-se-qup";
791			reg = <0 0x008c0000 0 0x6000>;
792			clock-names = "m-ahb", "s-ahb";
793			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
794				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
795			#address-cells = <2>;
796			#size-cells = <2>;
797			ranges;
798			iommus = <&apps_smmu 0x43 0x0>;
799			status = "disabled";
800
801			i2c0: i2c@880000 {
802				compatible = "qcom,geni-i2c";
803				reg = <0 0x00880000 0 0x4000>;
804				clock-names = "se";
805				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
806				pinctrl-names = "default";
807				pinctrl-0 = <&qup_i2c0_default>;
808				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
809				#address-cells = <1>;
810				#size-cells = <0>;
811				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
812						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
813						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
814				interconnect-names = "qup-core", "qup-config",
815							"qup-memory";
816				power-domains = <&rpmhpd SC7180_CX>;
817				required-opps = <&rpmhpd_opp_low_svs>;
818				status = "disabled";
819			};
820
821			spi0: spi@880000 {
822				compatible = "qcom,geni-spi";
823				reg = <0 0x00880000 0 0x4000>;
824				clock-names = "se";
825				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
826				pinctrl-names = "default";
827				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
828				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
829				#address-cells = <1>;
830				#size-cells = <0>;
831				power-domains = <&rpmhpd SC7180_CX>;
832				operating-points-v2 = <&qup_opp_table>;
833				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
834						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
835				interconnect-names = "qup-core", "qup-config";
836				status = "disabled";
837			};
838
839			uart0: serial@880000 {
840				compatible = "qcom,geni-uart";
841				reg = <0 0x00880000 0 0x4000>;
842				clock-names = "se";
843				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
844				pinctrl-names = "default";
845				pinctrl-0 = <&qup_uart0_default>;
846				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
847				power-domains = <&rpmhpd SC7180_CX>;
848				operating-points-v2 = <&qup_opp_table>;
849				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
850						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
851				interconnect-names = "qup-core", "qup-config";
852				status = "disabled";
853			};
854
855			i2c1: i2c@884000 {
856				compatible = "qcom,geni-i2c";
857				reg = <0 0x00884000 0 0x4000>;
858				clock-names = "se";
859				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
860				pinctrl-names = "default";
861				pinctrl-0 = <&qup_i2c1_default>;
862				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
863				#address-cells = <1>;
864				#size-cells = <0>;
865				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
866						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
867						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
868				interconnect-names = "qup-core", "qup-config",
869							"qup-memory";
870				power-domains = <&rpmhpd SC7180_CX>;
871				required-opps = <&rpmhpd_opp_low_svs>;
872				status = "disabled";
873			};
874
875			spi1: spi@884000 {
876				compatible = "qcom,geni-spi";
877				reg = <0 0x00884000 0 0x4000>;
878				clock-names = "se";
879				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
880				pinctrl-names = "default";
881				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
882				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
883				#address-cells = <1>;
884				#size-cells = <0>;
885				power-domains = <&rpmhpd SC7180_CX>;
886				operating-points-v2 = <&qup_opp_table>;
887				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
888						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
889				interconnect-names = "qup-core", "qup-config";
890				status = "disabled";
891			};
892
893			uart1: serial@884000 {
894				compatible = "qcom,geni-uart";
895				reg = <0 0x00884000 0 0x4000>;
896				clock-names = "se";
897				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
898				pinctrl-names = "default";
899				pinctrl-0 = <&qup_uart1_default>;
900				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
901				power-domains = <&rpmhpd SC7180_CX>;
902				operating-points-v2 = <&qup_opp_table>;
903				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
904						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
905				interconnect-names = "qup-core", "qup-config";
906				status = "disabled";
907			};
908
909			i2c2: i2c@888000 {
910				compatible = "qcom,geni-i2c";
911				reg = <0 0x00888000 0 0x4000>;
912				clock-names = "se";
913				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
914				pinctrl-names = "default";
915				pinctrl-0 = <&qup_i2c2_default>;
916				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
917				#address-cells = <1>;
918				#size-cells = <0>;
919				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
920						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
921						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
922				interconnect-names = "qup-core", "qup-config",
923							"qup-memory";
924				power-domains = <&rpmhpd SC7180_CX>;
925				required-opps = <&rpmhpd_opp_low_svs>;
926				status = "disabled";
927			};
928
929			uart2: serial@888000 {
930				compatible = "qcom,geni-uart";
931				reg = <0 0x00888000 0 0x4000>;
932				clock-names = "se";
933				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
934				pinctrl-names = "default";
935				pinctrl-0 = <&qup_uart2_default>;
936				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
937				power-domains = <&rpmhpd SC7180_CX>;
938				operating-points-v2 = <&qup_opp_table>;
939				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
940						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
941				interconnect-names = "qup-core", "qup-config";
942				status = "disabled";
943			};
944
945			i2c3: i2c@88c000 {
946				compatible = "qcom,geni-i2c";
947				reg = <0 0x0088c000 0 0x4000>;
948				clock-names = "se";
949				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
950				pinctrl-names = "default";
951				pinctrl-0 = <&qup_i2c3_default>;
952				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
953				#address-cells = <1>;
954				#size-cells = <0>;
955				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
956						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
957						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
958				interconnect-names = "qup-core", "qup-config",
959							"qup-memory";
960				power-domains = <&rpmhpd SC7180_CX>;
961				required-opps = <&rpmhpd_opp_low_svs>;
962				status = "disabled";
963			};
964
965			spi3: spi@88c000 {
966				compatible = "qcom,geni-spi";
967				reg = <0 0x0088c000 0 0x4000>;
968				clock-names = "se";
969				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
970				pinctrl-names = "default";
971				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
972				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
973				#address-cells = <1>;
974				#size-cells = <0>;
975				power-domains = <&rpmhpd SC7180_CX>;
976				operating-points-v2 = <&qup_opp_table>;
977				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
978						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
979				interconnect-names = "qup-core", "qup-config";
980				status = "disabled";
981			};
982
983			uart3: serial@88c000 {
984				compatible = "qcom,geni-uart";
985				reg = <0 0x0088c000 0 0x4000>;
986				clock-names = "se";
987				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
988				pinctrl-names = "default";
989				pinctrl-0 = <&qup_uart3_default>;
990				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
991				power-domains = <&rpmhpd SC7180_CX>;
992				operating-points-v2 = <&qup_opp_table>;
993				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
994						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
995				interconnect-names = "qup-core", "qup-config";
996				status = "disabled";
997			};
998
999			i2c4: i2c@890000 {
1000				compatible = "qcom,geni-i2c";
1001				reg = <0 0x00890000 0 0x4000>;
1002				clock-names = "se";
1003				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1004				pinctrl-names = "default";
1005				pinctrl-0 = <&qup_i2c4_default>;
1006				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1007				#address-cells = <1>;
1008				#size-cells = <0>;
1009				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1010						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1011						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1012				interconnect-names = "qup-core", "qup-config",
1013							"qup-memory";
1014				power-domains = <&rpmhpd SC7180_CX>;
1015				required-opps = <&rpmhpd_opp_low_svs>;
1016				status = "disabled";
1017			};
1018
1019			uart4: serial@890000 {
1020				compatible = "qcom,geni-uart";
1021				reg = <0 0x00890000 0 0x4000>;
1022				clock-names = "se";
1023				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1024				pinctrl-names = "default";
1025				pinctrl-0 = <&qup_uart4_default>;
1026				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1027				power-domains = <&rpmhpd SC7180_CX>;
1028				operating-points-v2 = <&qup_opp_table>;
1029				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1030						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1031				interconnect-names = "qup-core", "qup-config";
1032				status = "disabled";
1033			};
1034
1035			i2c5: i2c@894000 {
1036				compatible = "qcom,geni-i2c";
1037				reg = <0 0x00894000 0 0x4000>;
1038				clock-names = "se";
1039				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1040				pinctrl-names = "default";
1041				pinctrl-0 = <&qup_i2c5_default>;
1042				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1043				#address-cells = <1>;
1044				#size-cells = <0>;
1045				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1046						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1047						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1048				interconnect-names = "qup-core", "qup-config",
1049							"qup-memory";
1050				power-domains = <&rpmhpd SC7180_CX>;
1051				required-opps = <&rpmhpd_opp_low_svs>;
1052				status = "disabled";
1053			};
1054
1055			spi5: spi@894000 {
1056				compatible = "qcom,geni-spi";
1057				reg = <0 0x00894000 0 0x4000>;
1058				clock-names = "se";
1059				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1060				pinctrl-names = "default";
1061				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
1062				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1063				#address-cells = <1>;
1064				#size-cells = <0>;
1065				power-domains = <&rpmhpd SC7180_CX>;
1066				operating-points-v2 = <&qup_opp_table>;
1067				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1068						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1069				interconnect-names = "qup-core", "qup-config";
1070				status = "disabled";
1071			};
1072
1073			uart5: serial@894000 {
1074				compatible = "qcom,geni-uart";
1075				reg = <0 0x00894000 0 0x4000>;
1076				clock-names = "se";
1077				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1078				pinctrl-names = "default";
1079				pinctrl-0 = <&qup_uart5_default>;
1080				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1081				power-domains = <&rpmhpd SC7180_CX>;
1082				operating-points-v2 = <&qup_opp_table>;
1083				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1084						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1085				interconnect-names = "qup-core", "qup-config";
1086				status = "disabled";
1087			};
1088		};
1089
1090		qupv3_id_1: geniqup@ac0000 {
1091			compatible = "qcom,geni-se-qup";
1092			reg = <0 0x00ac0000 0 0x6000>;
1093			clock-names = "m-ahb", "s-ahb";
1094			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1095				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1096			#address-cells = <2>;
1097			#size-cells = <2>;
1098			ranges;
1099			iommus = <&apps_smmu 0x4c3 0x0>;
1100			status = "disabled";
1101
1102			i2c6: i2c@a80000 {
1103				compatible = "qcom,geni-i2c";
1104				reg = <0 0x00a80000 0 0x4000>;
1105				clock-names = "se";
1106				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1107				pinctrl-names = "default";
1108				pinctrl-0 = <&qup_i2c6_default>;
1109				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1110				#address-cells = <1>;
1111				#size-cells = <0>;
1112				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1113						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1114						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1115				interconnect-names = "qup-core", "qup-config",
1116							"qup-memory";
1117				power-domains = <&rpmhpd SC7180_CX>;
1118				required-opps = <&rpmhpd_opp_low_svs>;
1119				status = "disabled";
1120			};
1121
1122			spi6: spi@a80000 {
1123				compatible = "qcom,geni-spi";
1124				reg = <0 0x00a80000 0 0x4000>;
1125				clock-names = "se";
1126				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1127				pinctrl-names = "default";
1128				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
1129				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1130				#address-cells = <1>;
1131				#size-cells = <0>;
1132				power-domains = <&rpmhpd SC7180_CX>;
1133				operating-points-v2 = <&qup_opp_table>;
1134				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1135						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1136				interconnect-names = "qup-core", "qup-config";
1137				status = "disabled";
1138			};
1139
1140			uart6: serial@a80000 {
1141				compatible = "qcom,geni-uart";
1142				reg = <0 0x00a80000 0 0x4000>;
1143				clock-names = "se";
1144				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1145				pinctrl-names = "default";
1146				pinctrl-0 = <&qup_uart6_default>;
1147				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1148				power-domains = <&rpmhpd SC7180_CX>;
1149				operating-points-v2 = <&qup_opp_table>;
1150				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1151						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1152				interconnect-names = "qup-core", "qup-config";
1153				status = "disabled";
1154			};
1155
1156			i2c7: i2c@a84000 {
1157				compatible = "qcom,geni-i2c";
1158				reg = <0 0x00a84000 0 0x4000>;
1159				clock-names = "se";
1160				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1161				pinctrl-names = "default";
1162				pinctrl-0 = <&qup_i2c7_default>;
1163				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1164				#address-cells = <1>;
1165				#size-cells = <0>;
1166				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1167						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1168						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1169				interconnect-names = "qup-core", "qup-config",
1170							"qup-memory";
1171				power-domains = <&rpmhpd SC7180_CX>;
1172				required-opps = <&rpmhpd_opp_low_svs>;
1173				status = "disabled";
1174			};
1175
1176			uart7: serial@a84000 {
1177				compatible = "qcom,geni-uart";
1178				reg = <0 0x00a84000 0 0x4000>;
1179				clock-names = "se";
1180				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1181				pinctrl-names = "default";
1182				pinctrl-0 = <&qup_uart7_default>;
1183				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1184				power-domains = <&rpmhpd SC7180_CX>;
1185				operating-points-v2 = <&qup_opp_table>;
1186				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1187						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1188				interconnect-names = "qup-core", "qup-config";
1189				status = "disabled";
1190			};
1191
1192			i2c8: i2c@a88000 {
1193				compatible = "qcom,geni-i2c";
1194				reg = <0 0x00a88000 0 0x4000>;
1195				clock-names = "se";
1196				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1197				pinctrl-names = "default";
1198				pinctrl-0 = <&qup_i2c8_default>;
1199				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1200				#address-cells = <1>;
1201				#size-cells = <0>;
1202				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1203						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1204						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1205				interconnect-names = "qup-core", "qup-config",
1206							"qup-memory";
1207				power-domains = <&rpmhpd SC7180_CX>;
1208				required-opps = <&rpmhpd_opp_low_svs>;
1209				status = "disabled";
1210			};
1211
1212			spi8: spi@a88000 {
1213				compatible = "qcom,geni-spi";
1214				reg = <0 0x00a88000 0 0x4000>;
1215				clock-names = "se";
1216				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1217				pinctrl-names = "default";
1218				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
1219				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1220				#address-cells = <1>;
1221				#size-cells = <0>;
1222				power-domains = <&rpmhpd SC7180_CX>;
1223				operating-points-v2 = <&qup_opp_table>;
1224				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1225						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1226				interconnect-names = "qup-core", "qup-config";
1227				status = "disabled";
1228			};
1229
1230			uart8: serial@a88000 {
1231				compatible = "qcom,geni-debug-uart";
1232				reg = <0 0x00a88000 0 0x4000>;
1233				clock-names = "se";
1234				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1235				pinctrl-names = "default";
1236				pinctrl-0 = <&qup_uart8_default>;
1237				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1238				power-domains = <&rpmhpd SC7180_CX>;
1239				operating-points-v2 = <&qup_opp_table>;
1240				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1241						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1242				interconnect-names = "qup-core", "qup-config";
1243				status = "disabled";
1244			};
1245
1246			i2c9: i2c@a8c000 {
1247				compatible = "qcom,geni-i2c";
1248				reg = <0 0x00a8c000 0 0x4000>;
1249				clock-names = "se";
1250				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1251				pinctrl-names = "default";
1252				pinctrl-0 = <&qup_i2c9_default>;
1253				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1254				#address-cells = <1>;
1255				#size-cells = <0>;
1256				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1257						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1258						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1259				interconnect-names = "qup-core", "qup-config",
1260							"qup-memory";
1261				power-domains = <&rpmhpd SC7180_CX>;
1262				required-opps = <&rpmhpd_opp_low_svs>;
1263				status = "disabled";
1264			};
1265
1266			uart9: serial@a8c000 {
1267				compatible = "qcom,geni-uart";
1268				reg = <0 0x00a8c000 0 0x4000>;
1269				clock-names = "se";
1270				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1271				pinctrl-names = "default";
1272				pinctrl-0 = <&qup_uart9_default>;
1273				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1274				power-domains = <&rpmhpd SC7180_CX>;
1275				operating-points-v2 = <&qup_opp_table>;
1276				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1277						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1278				interconnect-names = "qup-core", "qup-config";
1279				status = "disabled";
1280			};
1281
1282			i2c10: i2c@a90000 {
1283				compatible = "qcom,geni-i2c";
1284				reg = <0 0x00a90000 0 0x4000>;
1285				clock-names = "se";
1286				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1287				pinctrl-names = "default";
1288				pinctrl-0 = <&qup_i2c10_default>;
1289				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1290				#address-cells = <1>;
1291				#size-cells = <0>;
1292				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1293						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1294						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1295				interconnect-names = "qup-core", "qup-config",
1296							"qup-memory";
1297				power-domains = <&rpmhpd SC7180_CX>;
1298				required-opps = <&rpmhpd_opp_low_svs>;
1299				status = "disabled";
1300			};
1301
1302			spi10: spi@a90000 {
1303				compatible = "qcom,geni-spi";
1304				reg = <0 0x00a90000 0 0x4000>;
1305				clock-names = "se";
1306				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1307				pinctrl-names = "default";
1308				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
1309				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1310				#address-cells = <1>;
1311				#size-cells = <0>;
1312				power-domains = <&rpmhpd SC7180_CX>;
1313				operating-points-v2 = <&qup_opp_table>;
1314				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1315						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1316				interconnect-names = "qup-core", "qup-config";
1317				status = "disabled";
1318			};
1319
1320			uart10: serial@a90000 {
1321				compatible = "qcom,geni-uart";
1322				reg = <0 0x00a90000 0 0x4000>;
1323				clock-names = "se";
1324				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1325				pinctrl-names = "default";
1326				pinctrl-0 = <&qup_uart10_default>;
1327				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1328				power-domains = <&rpmhpd SC7180_CX>;
1329				operating-points-v2 = <&qup_opp_table>;
1330				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1331						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1332				interconnect-names = "qup-core", "qup-config";
1333				status = "disabled";
1334			};
1335
1336			i2c11: i2c@a94000 {
1337				compatible = "qcom,geni-i2c";
1338				reg = <0 0x00a94000 0 0x4000>;
1339				clock-names = "se";
1340				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1341				pinctrl-names = "default";
1342				pinctrl-0 = <&qup_i2c11_default>;
1343				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1344				#address-cells = <1>;
1345				#size-cells = <0>;
1346				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1347						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1348						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1349				interconnect-names = "qup-core", "qup-config",
1350							"qup-memory";
1351				power-domains = <&rpmhpd SC7180_CX>;
1352				required-opps = <&rpmhpd_opp_low_svs>;
1353				status = "disabled";
1354			};
1355
1356			spi11: spi@a94000 {
1357				compatible = "qcom,geni-spi";
1358				reg = <0 0x00a94000 0 0x4000>;
1359				clock-names = "se";
1360				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1361				pinctrl-names = "default";
1362				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
1363				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1364				#address-cells = <1>;
1365				#size-cells = <0>;
1366				power-domains = <&rpmhpd SC7180_CX>;
1367				operating-points-v2 = <&qup_opp_table>;
1368				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1369						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1370				interconnect-names = "qup-core", "qup-config";
1371				status = "disabled";
1372			};
1373
1374			uart11: serial@a94000 {
1375				compatible = "qcom,geni-uart";
1376				reg = <0 0x00a94000 0 0x4000>;
1377				clock-names = "se";
1378				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1379				pinctrl-names = "default";
1380				pinctrl-0 = <&qup_uart11_default>;
1381				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1382				power-domains = <&rpmhpd SC7180_CX>;
1383				operating-points-v2 = <&qup_opp_table>;
1384				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1385						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1386				interconnect-names = "qup-core", "qup-config";
1387				status = "disabled";
1388			};
1389		};
1390
1391		config_noc: interconnect@1500000 {
1392			compatible = "qcom,sc7180-config-noc";
1393			reg = <0 0x01500000 0 0x28000>;
1394			#interconnect-cells = <2>;
1395			qcom,bcm-voters = <&apps_bcm_voter>;
1396		};
1397
1398		system_noc: interconnect@1620000 {
1399			compatible = "qcom,sc7180-system-noc";
1400			reg = <0 0x01620000 0 0x17080>;
1401			#interconnect-cells = <2>;
1402			qcom,bcm-voters = <&apps_bcm_voter>;
1403		};
1404
1405		mc_virt: interconnect@1638000 {
1406			compatible = "qcom,sc7180-mc-virt";
1407			reg = <0 0x01638000 0 0x1000>;
1408			#interconnect-cells = <2>;
1409			qcom,bcm-voters = <&apps_bcm_voter>;
1410		};
1411
1412		qup_virt: interconnect@1650000 {
1413			compatible = "qcom,sc7180-qup-virt";
1414			reg = <0 0x01650000 0 0x1000>;
1415			#interconnect-cells = <2>;
1416			qcom,bcm-voters = <&apps_bcm_voter>;
1417		};
1418
1419		aggre1_noc: interconnect@16e0000 {
1420			compatible = "qcom,sc7180-aggre1-noc";
1421			reg = <0 0x016e0000 0 0x15080>;
1422			#interconnect-cells = <2>;
1423			qcom,bcm-voters = <&apps_bcm_voter>;
1424		};
1425
1426		aggre2_noc: interconnect@1705000 {
1427			compatible = "qcom,sc7180-aggre2-noc";
1428			reg = <0 0x01705000 0 0x9000>;
1429			#interconnect-cells = <2>;
1430			qcom,bcm-voters = <&apps_bcm_voter>;
1431		};
1432
1433		compute_noc: interconnect@170e000 {
1434			compatible = "qcom,sc7180-compute-noc";
1435			reg = <0 0x0170e000 0 0x6000>;
1436			#interconnect-cells = <2>;
1437			qcom,bcm-voters = <&apps_bcm_voter>;
1438		};
1439
1440		mmss_noc: interconnect@1740000 {
1441			compatible = "qcom,sc7180-mmss-noc";
1442			reg = <0 0x01740000 0 0x1c100>;
1443			#interconnect-cells = <2>;
1444			qcom,bcm-voters = <&apps_bcm_voter>;
1445		};
1446
1447		ipa: ipa@1e40000 {
1448			compatible = "qcom,sc7180-ipa";
1449
1450			iommus = <&apps_smmu 0x440 0x0>,
1451				 <&apps_smmu 0x442 0x0>;
1452			reg = <0 0x01e40000 0 0x7000>,
1453			      <0 0x01e47000 0 0x2000>,
1454			      <0 0x01e04000 0 0x2c000>;
1455			reg-names = "ipa-reg",
1456				    "ipa-shared",
1457				    "gsi";
1458
1459			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
1460					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
1461					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1462					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
1463			interrupt-names = "ipa",
1464					  "gsi",
1465					  "ipa-clock-query",
1466					  "ipa-setup-ready";
1467
1468			clocks = <&rpmhcc RPMH_IPA_CLK>;
1469			clock-names = "core";
1470
1471			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
1472					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
1473					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
1474			interconnect-names = "memory",
1475					     "imem",
1476					     "config";
1477
1478			qcom,qmp = <&aoss_qmp>;
1479
1480			qcom,smem-states = <&ipa_smp2p_out 0>,
1481					   <&ipa_smp2p_out 1>;
1482			qcom,smem-state-names = "ipa-clock-enabled-valid",
1483						"ipa-clock-enabled";
1484
1485			status = "disabled";
1486		};
1487
1488		tcsr_mutex: hwlock@1f40000 {
1489			compatible = "qcom,tcsr-mutex";
1490			reg = <0 0x01f40000 0 0x20000>;
1491			#hwlock-cells = <1>;
1492		};
1493
1494		tcsr_regs_1: syscon@1f60000 {
1495			compatible = "qcom,sc7180-tcsr", "syscon";
1496			reg = <0 0x01f60000 0 0x20000>;
1497		};
1498
1499		tcsr_regs_2: syscon@1fc0000 {
1500			compatible = "qcom,sc7180-tcsr", "syscon";
1501			reg = <0 0x01fc0000 0 0x40000>;
1502		};
1503
1504		tlmm: pinctrl@3500000 {
1505			compatible = "qcom,sc7180-pinctrl";
1506			reg = <0 0x03500000 0 0x300000>,
1507			      <0 0x03900000 0 0x300000>,
1508			      <0 0x03d00000 0 0x300000>;
1509			reg-names = "west", "north", "south";
1510			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1511			gpio-controller;
1512			#gpio-cells = <2>;
1513			interrupt-controller;
1514			#interrupt-cells = <2>;
1515			gpio-ranges = <&tlmm 0 0 120>;
1516			wakeup-parent = <&pdc>;
1517
1518			dp_hot_plug_det: dp-hot-plug-det-state {
1519				pins = "gpio117";
1520				function = "dp_hot";
1521			};
1522
1523			qspi_clk: qspi-clk-state {
1524				pins = "gpio63";
1525				function = "qspi_clk";
1526			};
1527
1528			qspi_cs0: qspi-cs0-state {
1529				pins = "gpio68";
1530				function = "qspi_cs";
1531			};
1532
1533			qspi_cs1: qspi-cs1-state {
1534				pins = "gpio72";
1535				function = "qspi_cs";
1536			};
1537
1538			qspi_data01: qspi-data01-state {
1539				pins = "gpio64", "gpio65";
1540				function = "qspi_data";
1541			};
1542
1543			qspi_data12: qspi-data12-state {
1544				pins = "gpio66", "gpio67";
1545				function = "qspi_data";
1546			};
1547
1548			qup_i2c0_default: qup-i2c0-default-state {
1549				pins = "gpio34", "gpio35";
1550				function = "qup00";
1551			};
1552
1553			qup_i2c1_default: qup-i2c1-default-state {
1554				pins = "gpio0", "gpio1";
1555				function = "qup01";
1556			};
1557
1558			qup_i2c2_default: qup-i2c2-default-state {
1559				pins = "gpio15", "gpio16";
1560				function = "qup02_i2c";
1561			};
1562
1563			qup_i2c3_default: qup-i2c3-default-state {
1564				pins = "gpio38", "gpio39";
1565				function = "qup03";
1566			};
1567
1568			qup_i2c4_default: qup-i2c4-default-state {
1569				pins = "gpio115", "gpio116";
1570				function = "qup04_i2c";
1571			};
1572
1573			qup_i2c5_default: qup-i2c5-default-state {
1574				pins = "gpio25", "gpio26";
1575				function = "qup05";
1576			};
1577
1578			qup_i2c6_default: qup-i2c6-default-state {
1579				pins = "gpio59", "gpio60";
1580				function = "qup10";
1581			};
1582
1583			qup_i2c7_default: qup-i2c7-default-state {
1584				pins = "gpio6", "gpio7";
1585				function = "qup11_i2c";
1586			};
1587
1588			qup_i2c8_default: qup-i2c8-default-state {
1589				pins = "gpio42", "gpio43";
1590				function = "qup12";
1591			};
1592
1593			qup_i2c9_default: qup-i2c9-default-state {
1594				pins = "gpio46", "gpio47";
1595				function = "qup13_i2c";
1596			};
1597
1598			qup_i2c10_default: qup-i2c10-default-state {
1599				pins = "gpio86", "gpio87";
1600				function = "qup14";
1601			};
1602
1603			qup_i2c11_default: qup-i2c11-default-state {
1604				pins = "gpio53", "gpio54";
1605				function = "qup15";
1606			};
1607
1608			qup_spi0_spi: qup-spi0-spi-state {
1609				pins = "gpio34", "gpio35", "gpio36";
1610				function = "qup00";
1611			};
1612
1613			qup_spi0_cs: qup-spi0-cs-state {
1614				pins = "gpio37";
1615				function = "qup00";
1616			};
1617
1618			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
1619				pins = "gpio37";
1620				function = "gpio";
1621			};
1622
1623			qup_spi1_spi: qup-spi1-spi-state {
1624				pins = "gpio0", "gpio1", "gpio2";
1625				function = "qup01";
1626			};
1627
1628			qup_spi1_cs: qup-spi1-cs-state {
1629				pins = "gpio3";
1630				function = "qup01";
1631			};
1632
1633			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
1634				pins = "gpio3";
1635				function = "gpio";
1636			};
1637
1638			qup_spi3_spi: qup-spi3-spi-state {
1639				pins = "gpio38", "gpio39", "gpio40";
1640				function = "qup03";
1641			};
1642
1643			qup_spi3_cs: qup-spi3-cs-state {
1644				pins = "gpio41";
1645				function = "qup03";
1646			};
1647
1648			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
1649				pins = "gpio41";
1650				function = "gpio";
1651			};
1652
1653			qup_spi5_spi: qup-spi5-spi-state {
1654				pins = "gpio25", "gpio26", "gpio27";
1655				function = "qup05";
1656			};
1657
1658			qup_spi5_cs: qup-spi5-cs-state {
1659				pins = "gpio28";
1660				function = "qup05";
1661			};
1662
1663			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
1664				pins = "gpio28";
1665				function = "gpio";
1666			};
1667
1668			qup_spi6_spi: qup-spi6-spi-state {
1669				pins = "gpio59", "gpio60", "gpio61";
1670				function = "qup10";
1671			};
1672
1673			qup_spi6_cs: qup-spi6-cs-state {
1674				pins = "gpio62";
1675				function = "qup10";
1676			};
1677
1678			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
1679				pins = "gpio62";
1680				function = "gpio";
1681			};
1682
1683			qup_spi8_spi: qup-spi8-spi-state {
1684				pins = "gpio42", "gpio43", "gpio44";
1685				function = "qup12";
1686			};
1687
1688			qup_spi8_cs: qup-spi8-cs-state {
1689				pins = "gpio45";
1690				function = "qup12";
1691			};
1692
1693			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
1694				pins = "gpio45";
1695				function = "gpio";
1696			};
1697
1698			qup_spi10_spi: qup-spi10-spi-state {
1699				pins = "gpio86", "gpio87", "gpio88";
1700				function = "qup14";
1701			};
1702
1703			qup_spi10_cs: qup-spi10-cs-state {
1704				pins = "gpio89";
1705				function = "qup14";
1706			};
1707
1708			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
1709				pins = "gpio89";
1710				function = "gpio";
1711			};
1712
1713			qup_spi11_spi: qup-spi11-spi-state {
1714				pins = "gpio53", "gpio54", "gpio55";
1715				function = "qup15";
1716			};
1717
1718			qup_spi11_cs: qup-spi11-cs-state {
1719				pins = "gpio56";
1720				function = "qup15";
1721			};
1722
1723			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
1724				pins = "gpio56";
1725				function = "gpio";
1726			};
1727
1728			qup_uart0_default: qup-uart0-default-state {
1729				qup_uart0_cts: cts-pins {
1730					pins = "gpio34";
1731					function = "qup00";
1732				};
1733
1734				qup_uart0_rts: rts-pins {
1735					pins = "gpio35";
1736					function = "qup00";
1737				};
1738
1739				qup_uart0_tx: tx-pins {
1740					pins = "gpio36";
1741					function = "qup00";
1742				};
1743
1744				qup_uart0_rx: rx-pins {
1745					pins = "gpio37";
1746					function = "qup00";
1747				};
1748			};
1749
1750			qup_uart1_default: qup-uart1-default-state {
1751				qup_uart1_cts: cts-pins {
1752					pins = "gpio0";
1753					function = "qup01";
1754				};
1755
1756				qup_uart1_rts: rts-pins {
1757					pins = "gpio1";
1758					function = "qup01";
1759				};
1760
1761				qup_uart1_tx: tx-pins {
1762					pins = "gpio2";
1763					function = "qup01";
1764				};
1765
1766				qup_uart1_rx: rx-pins {
1767					pins = "gpio3";
1768					function = "qup01";
1769				};
1770			};
1771
1772			qup_uart2_default: qup-uart2-default-state {
1773				qup_uart2_tx: tx-pins {
1774					pins = "gpio15";
1775					function = "qup02_uart";
1776				};
1777
1778				qup_uart2_rx: rx-pins {
1779					pins = "gpio16";
1780					function = "qup02_uart";
1781				};
1782			};
1783
1784			qup_uart3_default: qup-uart3-default-state {
1785				qup_uart3_cts: cts-pins {
1786					pins = "gpio38";
1787					function = "qup03";
1788				};
1789
1790				qup_uart3_rts: rts-pins {
1791					pins = "gpio39";
1792					function = "qup03";
1793				};
1794
1795				qup_uart3_tx: tx-pins {
1796					pins = "gpio40";
1797					function = "qup03";
1798				};
1799
1800				qup_uart3_rx: rx-pins {
1801					pins = "gpio41";
1802					function = "qup03";
1803				};
1804			};
1805
1806			qup_uart4_default: qup-uart4-default-state {
1807				qup_uart4_tx: tx-pins {
1808					pins = "gpio115";
1809					function = "qup04_uart";
1810				};
1811
1812				qup_uart4_rx: rx-pins {
1813					pins = "gpio116";
1814					function = "qup04_uart";
1815				};
1816			};
1817
1818			qup_uart5_default: qup-uart5-default-state {
1819				qup_uart5_cts: cts-pins {
1820					pins = "gpio25";
1821					function = "qup05";
1822				};
1823
1824				qup_uart5_rts: rts-pins {
1825					pins = "gpio26";
1826					function = "qup05";
1827				};
1828
1829				qup_uart5_tx: tx-pins {
1830					pins = "gpio27";
1831					function = "qup05";
1832				};
1833
1834				qup_uart5_rx: rx-pins {
1835					pins = "gpio28";
1836					function = "qup05";
1837				};
1838			};
1839
1840			qup_uart6_default: qup-uart6-default-state {
1841				qup_uart6_cts: cts-pins {
1842					pins = "gpio59";
1843					function = "qup10";
1844				};
1845
1846				qup_uart6_rts: rts-pins {
1847					pins = "gpio60";
1848					function = "qup10";
1849				};
1850
1851				qup_uart6_tx: tx-pins {
1852					pins = "gpio61";
1853					function = "qup10";
1854				};
1855
1856				qup_uart6_rx: rx-pins {
1857					pins = "gpio62";
1858					function = "qup10";
1859				};
1860			};
1861
1862			qup_uart7_default: qup-uart7-default-state {
1863				qup_uart7_tx: tx-pins {
1864					pins = "gpio6";
1865					function = "qup11_uart";
1866				};
1867
1868				qup_uart7_rx: rx-pins {
1869					pins = "gpio7";
1870					function = "qup11_uart";
1871				};
1872			};
1873
1874			qup_uart8_default: qup-uart8-default-state {
1875				qup_uart8_tx: tx-pins {
1876					pins = "gpio44";
1877					function = "qup12";
1878				};
1879
1880				qup_uart8_rx: rx-pins {
1881					pins = "gpio45";
1882					function = "qup12";
1883				};
1884			};
1885
1886			qup_uart9_default: qup-uart9-default-state {
1887				qup_uart9_tx: tx-pins {
1888					pins = "gpio46";
1889					function = "qup13_uart";
1890				};
1891
1892				qup_uart9_rx: rx-pins {
1893					pins = "gpio47";
1894					function = "qup13_uart";
1895				};
1896			};
1897
1898			qup_uart10_default: qup-uart10-default-state {
1899				qup_uart10_cts: cts-pins {
1900					pins = "gpio86";
1901					function = "qup14";
1902				};
1903
1904				qup_uart10_rts: rts-pins {
1905					pins = "gpio87";
1906					function = "qup14";
1907				};
1908
1909				qup_uart10_tx: tx-pins {
1910					pins = "gpio88";
1911					function = "qup14";
1912				};
1913
1914				qup_uart10_rx: rx-pins {
1915					pins = "gpio89";
1916					function = "qup14";
1917				};
1918			};
1919
1920			qup_uart11_default: qup-uart11-default-state {
1921				qup_uart11_cts: cts-pins {
1922					pins = "gpio53";
1923					function = "qup15";
1924				};
1925
1926				qup_uart11_rts: rts-pins {
1927					pins = "gpio54";
1928					function = "qup15";
1929				};
1930
1931				qup_uart11_tx: tx-pins {
1932					pins = "gpio55";
1933					function = "qup15";
1934				};
1935
1936				qup_uart11_rx: rx-pins {
1937					pins = "gpio56";
1938					function = "qup15";
1939				};
1940			};
1941
1942			sec_mi2s_active: sec-mi2s-active-state {
1943				pins = "gpio49", "gpio50", "gpio51";
1944				function = "mi2s_1";
1945			};
1946
1947			pri_mi2s_active: pri-mi2s-active-state {
1948				pins = "gpio53", "gpio54", "gpio55", "gpio56";
1949				function = "mi2s_0";
1950			};
1951
1952			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
1953				pins = "gpio57";
1954				function = "lpass_ext";
1955			};
1956		};
1957
1958		remoteproc_mpss: remoteproc@4080000 {
1959			compatible = "qcom,sc7180-mpss-pas";
1960			reg = <0 0x04080000 0 0x4040>;
1961
1962			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
1963					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1964					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1965					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1966					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1967					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1968			interrupt-names = "wdog", "fatal", "ready", "handover",
1969					  "stop-ack", "shutdown-ack";
1970
1971			clocks = <&rpmhcc RPMH_CXO_CLK>;
1972			clock-names = "xo";
1973
1974			power-domains = <&rpmhpd SC7180_CX>,
1975					<&rpmhpd SC7180_MX>,
1976					<&rpmhpd SC7180_MSS>;
1977			power-domain-names = "cx", "mx", "mss";
1978
1979			memory-region = <&mpss_mem>;
1980
1981			qcom,qmp = <&aoss_qmp>;
1982
1983			qcom,smem-states = <&modem_smp2p_out 0>;
1984			qcom,smem-state-names = "stop";
1985
1986			status = "disabled";
1987
1988			glink-edge {
1989				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
1990				label = "modem";
1991				qcom,remote-pid = <1>;
1992				mboxes = <&apss_shared 12>;
1993			};
1994		};
1995
1996		gpu: gpu@5000000 {
1997			compatible = "qcom,adreno-618.0", "qcom,adreno";
1998			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
1999				<0 0x05061000 0 0x800>;
2000			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
2001			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2002			iommus = <&adreno_smmu 0>;
2003			operating-points-v2 = <&gpu_opp_table>;
2004			qcom,gmu = <&gmu>;
2005
2006			#cooling-cells = <2>;
2007
2008			nvmem-cells = <&gpu_speed_bin>;
2009			nvmem-cell-names = "speed_bin";
2010
2011			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
2012			interconnect-names = "gfx-mem";
2013
2014			gpu_opp_table: opp-table {
2015				compatible = "operating-points-v2";
2016
2017				opp-825000000 {
2018					opp-hz = /bits/ 64 <825000000>;
2019					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
2020					opp-peak-kBps = <8532000>;
2021					opp-supported-hw = <0x04>;
2022				};
2023
2024				opp-800000000 {
2025					opp-hz = /bits/ 64 <800000000>;
2026					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2027					opp-peak-kBps = <8532000>;
2028					opp-supported-hw = <0x07>;
2029				};
2030
2031				opp-650000000 {
2032					opp-hz = /bits/ 64 <650000000>;
2033					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2034					opp-peak-kBps = <7216000>;
2035					opp-supported-hw = <0x07>;
2036				};
2037
2038				opp-565000000 {
2039					opp-hz = /bits/ 64 <565000000>;
2040					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2041					opp-peak-kBps = <5412000>;
2042					opp-supported-hw = <0x07>;
2043				};
2044
2045				opp-430000000 {
2046					opp-hz = /bits/ 64 <430000000>;
2047					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2048					opp-peak-kBps = <5412000>;
2049					opp-supported-hw = <0x07>;
2050				};
2051
2052				opp-355000000 {
2053					opp-hz = /bits/ 64 <355000000>;
2054					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2055					opp-peak-kBps = <3072000>;
2056					opp-supported-hw = <0x07>;
2057				};
2058
2059				opp-267000000 {
2060					opp-hz = /bits/ 64 <267000000>;
2061					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2062					opp-peak-kBps = <3072000>;
2063					opp-supported-hw = <0x07>;
2064				};
2065
2066				opp-180000000 {
2067					opp-hz = /bits/ 64 <180000000>;
2068					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2069					opp-peak-kBps = <1804000>;
2070					opp-supported-hw = <0x07>;
2071				};
2072			};
2073		};
2074
2075		adreno_smmu: iommu@5040000 {
2076			compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
2077			reg = <0 0x05040000 0 0x10000>;
2078			#iommu-cells = <1>;
2079			#global-interrupts = <2>;
2080			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
2081					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
2082					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
2083					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
2084					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
2085					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
2086					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
2087					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
2088					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
2089					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
2090
2091			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2092				<&gcc GCC_GPU_CFG_AHB_CLK>;
2093			clock-names = "bus", "iface";
2094
2095			power-domains = <&gpucc CX_GDSC>;
2096		};
2097
2098		gmu: gmu@506a000 {
2099			compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
2100			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
2101				<0 0x0b490000 0 0x10000>;
2102			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
2103			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2104				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2105			interrupt-names = "hfi", "gmu";
2106			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
2107			       <&gpucc GPU_CC_CXO_CLK>,
2108			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2109			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2110			clock-names = "gmu", "cxo", "axi", "memnoc";
2111			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
2112			power-domain-names = "cx", "gx";
2113			iommus = <&adreno_smmu 5>;
2114			operating-points-v2 = <&gmu_opp_table>;
2115
2116			gmu_opp_table: opp-table {
2117				compatible = "operating-points-v2";
2118
2119				opp-200000000 {
2120					opp-hz = /bits/ 64 <200000000>;
2121					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2122				};
2123			};
2124		};
2125
2126		gpucc: clock-controller@5090000 {
2127			compatible = "qcom,sc7180-gpucc";
2128			reg = <0 0x05090000 0 0x9000>;
2129			clocks = <&rpmhcc RPMH_CXO_CLK>,
2130				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2131				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2132			clock-names = "bi_tcxo",
2133				      "gcc_gpu_gpll0_clk_src",
2134				      "gcc_gpu_gpll0_div_clk_src";
2135			#clock-cells = <1>;
2136			#reset-cells = <1>;
2137			#power-domain-cells = <1>;
2138		};
2139
2140		dma@10a2000 {
2141			compatible = "qcom,sc7180-dcc", "qcom,dcc";
2142			reg = <0x0 0x010a2000 0x0 0x1000>,
2143			      <0x0 0x010ae000 0x0 0x2000>;
2144		};
2145
2146		stm@6002000 {
2147			compatible = "arm,coresight-stm", "arm,primecell";
2148			reg = <0 0x06002000 0 0x1000>,
2149			      <0 0x16280000 0 0x180000>;
2150			reg-names = "stm-base", "stm-stimulus-base";
2151
2152			clocks = <&aoss_qmp>;
2153			clock-names = "apb_pclk";
2154
2155			out-ports {
2156				port {
2157					stm_out: endpoint {
2158						remote-endpoint = <&funnel0_in7>;
2159					};
2160				};
2161			};
2162		};
2163
2164		funnel@6041000 {
2165			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2166			reg = <0 0x06041000 0 0x1000>;
2167
2168			clocks = <&aoss_qmp>;
2169			clock-names = "apb_pclk";
2170
2171			out-ports {
2172				port {
2173					funnel0_out: endpoint {
2174						remote-endpoint = <&merge_funnel_in0>;
2175					};
2176				};
2177			};
2178
2179			in-ports {
2180				#address-cells = <1>;
2181				#size-cells = <0>;
2182
2183				port@7 {
2184					reg = <7>;
2185					funnel0_in7: endpoint {
2186						remote-endpoint = <&stm_out>;
2187					};
2188				};
2189			};
2190		};
2191
2192		funnel@6042000 {
2193			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2194			reg = <0 0x06042000 0 0x1000>;
2195
2196			clocks = <&aoss_qmp>;
2197			clock-names = "apb_pclk";
2198
2199			out-ports {
2200				port {
2201					funnel1_out: endpoint {
2202						remote-endpoint = <&merge_funnel_in1>;
2203					};
2204				};
2205			};
2206
2207			in-ports {
2208				#address-cells = <1>;
2209				#size-cells = <0>;
2210
2211				port@4 {
2212					reg = <4>;
2213					funnel1_in4: endpoint {
2214						remote-endpoint = <&apss_merge_funnel_out>;
2215					};
2216				};
2217			};
2218		};
2219
2220		funnel@6045000 {
2221			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2222			reg = <0 0x06045000 0 0x1000>;
2223
2224			clocks = <&aoss_qmp>;
2225			clock-names = "apb_pclk";
2226
2227			out-ports {
2228				port {
2229					merge_funnel_out: endpoint {
2230						remote-endpoint = <&swao_funnel_in>;
2231					};
2232				};
2233			};
2234
2235			in-ports {
2236				#address-cells = <1>;
2237				#size-cells = <0>;
2238
2239				port@0 {
2240					reg = <0>;
2241					merge_funnel_in0: endpoint {
2242						remote-endpoint = <&funnel0_out>;
2243					};
2244				};
2245
2246				port@1 {
2247					reg = <1>;
2248					merge_funnel_in1: endpoint {
2249						remote-endpoint = <&funnel1_out>;
2250					};
2251				};
2252			};
2253		};
2254
2255		replicator@6046000 {
2256			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2257			reg = <0 0x06046000 0 0x1000>;
2258
2259			clocks = <&aoss_qmp>;
2260			clock-names = "apb_pclk";
2261
2262			out-ports {
2263				port {
2264					replicator_out: endpoint {
2265						remote-endpoint = <&etr_in>;
2266					};
2267				};
2268			};
2269
2270			in-ports {
2271				port {
2272					replicator_in: endpoint {
2273						remote-endpoint = <&swao_replicator_out>;
2274					};
2275				};
2276			};
2277		};
2278
2279		etr@6048000 {
2280			compatible = "arm,coresight-tmc", "arm,primecell";
2281			reg = <0 0x06048000 0 0x1000>;
2282			iommus = <&apps_smmu 0x04a0 0x20>;
2283
2284			clocks = <&aoss_qmp>;
2285			clock-names = "apb_pclk";
2286			arm,scatter-gather;
2287
2288			in-ports {
2289				port {
2290					etr_in: endpoint {
2291						remote-endpoint = <&replicator_out>;
2292					};
2293				};
2294			};
2295		};
2296
2297		funnel@6b04000 {
2298			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2299			reg = <0 0x06b04000 0 0x1000>;
2300
2301			clocks = <&aoss_qmp>;
2302			clock-names = "apb_pclk";
2303
2304			out-ports {
2305				port {
2306					swao_funnel_out: endpoint {
2307						remote-endpoint = <&etf_in>;
2308					};
2309				};
2310			};
2311
2312			in-ports {
2313				#address-cells = <1>;
2314				#size-cells = <0>;
2315
2316				port@7 {
2317					reg = <7>;
2318					swao_funnel_in: endpoint {
2319						remote-endpoint = <&merge_funnel_out>;
2320					};
2321				};
2322			};
2323		};
2324
2325		etf@6b05000 {
2326			compatible = "arm,coresight-tmc", "arm,primecell";
2327			reg = <0 0x06b05000 0 0x1000>;
2328
2329			clocks = <&aoss_qmp>;
2330			clock-names = "apb_pclk";
2331
2332			out-ports {
2333				port {
2334					etf_out: endpoint {
2335						remote-endpoint = <&swao_replicator_in>;
2336					};
2337				};
2338			};
2339
2340			in-ports {
2341				port {
2342					etf_in: endpoint {
2343						remote-endpoint = <&swao_funnel_out>;
2344					};
2345				};
2346			};
2347		};
2348
2349		replicator@6b06000 {
2350			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2351			reg = <0 0x06b06000 0 0x1000>;
2352
2353			clocks = <&aoss_qmp>;
2354			clock-names = "apb_pclk";
2355			qcom,replicator-loses-context;
2356
2357			out-ports {
2358				port {
2359					swao_replicator_out: endpoint {
2360						remote-endpoint = <&replicator_in>;
2361					};
2362				};
2363			};
2364
2365			in-ports {
2366				port {
2367					swao_replicator_in: endpoint {
2368						remote-endpoint = <&etf_out>;
2369					};
2370				};
2371			};
2372		};
2373
2374		etm@7040000 {
2375			compatible = "arm,coresight-etm4x", "arm,primecell";
2376			reg = <0 0x07040000 0 0x1000>;
2377
2378			cpu = <&CPU0>;
2379
2380			clocks = <&aoss_qmp>;
2381			clock-names = "apb_pclk";
2382			arm,coresight-loses-context-with-cpu;
2383			qcom,skip-power-up;
2384
2385			out-ports {
2386				port {
2387					etm0_out: endpoint {
2388						remote-endpoint = <&apss_funnel_in0>;
2389					};
2390				};
2391			};
2392		};
2393
2394		etm@7140000 {
2395			compatible = "arm,coresight-etm4x", "arm,primecell";
2396			reg = <0 0x07140000 0 0x1000>;
2397
2398			cpu = <&CPU1>;
2399
2400			clocks = <&aoss_qmp>;
2401			clock-names = "apb_pclk";
2402			arm,coresight-loses-context-with-cpu;
2403			qcom,skip-power-up;
2404
2405			out-ports {
2406				port {
2407					etm1_out: endpoint {
2408						remote-endpoint = <&apss_funnel_in1>;
2409					};
2410				};
2411			};
2412		};
2413
2414		etm@7240000 {
2415			compatible = "arm,coresight-etm4x", "arm,primecell";
2416			reg = <0 0x07240000 0 0x1000>;
2417
2418			cpu = <&CPU2>;
2419
2420			clocks = <&aoss_qmp>;
2421			clock-names = "apb_pclk";
2422			arm,coresight-loses-context-with-cpu;
2423			qcom,skip-power-up;
2424
2425			out-ports {
2426				port {
2427					etm2_out: endpoint {
2428						remote-endpoint = <&apss_funnel_in2>;
2429					};
2430				};
2431			};
2432		};
2433
2434		etm@7340000 {
2435			compatible = "arm,coresight-etm4x", "arm,primecell";
2436			reg = <0 0x07340000 0 0x1000>;
2437
2438			cpu = <&CPU3>;
2439
2440			clocks = <&aoss_qmp>;
2441			clock-names = "apb_pclk";
2442			arm,coresight-loses-context-with-cpu;
2443			qcom,skip-power-up;
2444
2445			out-ports {
2446				port {
2447					etm3_out: endpoint {
2448						remote-endpoint = <&apss_funnel_in3>;
2449					};
2450				};
2451			};
2452		};
2453
2454		etm@7440000 {
2455			compatible = "arm,coresight-etm4x", "arm,primecell";
2456			reg = <0 0x07440000 0 0x1000>;
2457
2458			cpu = <&CPU4>;
2459
2460			clocks = <&aoss_qmp>;
2461			clock-names = "apb_pclk";
2462			arm,coresight-loses-context-with-cpu;
2463			qcom,skip-power-up;
2464
2465			out-ports {
2466				port {
2467					etm4_out: endpoint {
2468						remote-endpoint = <&apss_funnel_in4>;
2469					};
2470				};
2471			};
2472		};
2473
2474		etm@7540000 {
2475			compatible = "arm,coresight-etm4x", "arm,primecell";
2476			reg = <0 0x07540000 0 0x1000>;
2477
2478			cpu = <&CPU5>;
2479
2480			clocks = <&aoss_qmp>;
2481			clock-names = "apb_pclk";
2482			arm,coresight-loses-context-with-cpu;
2483			qcom,skip-power-up;
2484
2485			out-ports {
2486				port {
2487					etm5_out: endpoint {
2488						remote-endpoint = <&apss_funnel_in5>;
2489					};
2490				};
2491			};
2492		};
2493
2494		etm@7640000 {
2495			compatible = "arm,coresight-etm4x", "arm,primecell";
2496			reg = <0 0x07640000 0 0x1000>;
2497
2498			cpu = <&CPU6>;
2499
2500			clocks = <&aoss_qmp>;
2501			clock-names = "apb_pclk";
2502			arm,coresight-loses-context-with-cpu;
2503			qcom,skip-power-up;
2504
2505			out-ports {
2506				port {
2507					etm6_out: endpoint {
2508						remote-endpoint = <&apss_funnel_in6>;
2509					};
2510				};
2511			};
2512		};
2513
2514		etm@7740000 {
2515			compatible = "arm,coresight-etm4x", "arm,primecell";
2516			reg = <0 0x07740000 0 0x1000>;
2517
2518			cpu = <&CPU7>;
2519
2520			clocks = <&aoss_qmp>;
2521			clock-names = "apb_pclk";
2522			arm,coresight-loses-context-with-cpu;
2523			qcom,skip-power-up;
2524
2525			out-ports {
2526				port {
2527					etm7_out: endpoint {
2528						remote-endpoint = <&apss_funnel_in7>;
2529					};
2530				};
2531			};
2532		};
2533
2534		funnel@7800000 { /* APSS Funnel */
2535			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2536			reg = <0 0x07800000 0 0x1000>;
2537
2538			clocks = <&aoss_qmp>;
2539			clock-names = "apb_pclk";
2540
2541			out-ports {
2542				port {
2543					apss_funnel_out: endpoint {
2544						remote-endpoint = <&apss_merge_funnel_in>;
2545					};
2546				};
2547			};
2548
2549			in-ports {
2550				#address-cells = <1>;
2551				#size-cells = <0>;
2552
2553				port@0 {
2554					reg = <0>;
2555					apss_funnel_in0: endpoint {
2556						remote-endpoint = <&etm0_out>;
2557					};
2558				};
2559
2560				port@1 {
2561					reg = <1>;
2562					apss_funnel_in1: endpoint {
2563						remote-endpoint = <&etm1_out>;
2564					};
2565				};
2566
2567				port@2 {
2568					reg = <2>;
2569					apss_funnel_in2: endpoint {
2570						remote-endpoint = <&etm2_out>;
2571					};
2572				};
2573
2574				port@3 {
2575					reg = <3>;
2576					apss_funnel_in3: endpoint {
2577						remote-endpoint = <&etm3_out>;
2578					};
2579				};
2580
2581				port@4 {
2582					reg = <4>;
2583					apss_funnel_in4: endpoint {
2584						remote-endpoint = <&etm4_out>;
2585					};
2586				};
2587
2588				port@5 {
2589					reg = <5>;
2590					apss_funnel_in5: endpoint {
2591						remote-endpoint = <&etm5_out>;
2592					};
2593				};
2594
2595				port@6 {
2596					reg = <6>;
2597					apss_funnel_in6: endpoint {
2598						remote-endpoint = <&etm6_out>;
2599					};
2600				};
2601
2602				port@7 {
2603					reg = <7>;
2604					apss_funnel_in7: endpoint {
2605						remote-endpoint = <&etm7_out>;
2606					};
2607				};
2608			};
2609		};
2610
2611		funnel@7810000 {
2612			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2613			reg = <0 0x07810000 0 0x1000>;
2614
2615			clocks = <&aoss_qmp>;
2616			clock-names = "apb_pclk";
2617
2618			out-ports {
2619				port {
2620					apss_merge_funnel_out: endpoint {
2621						remote-endpoint = <&funnel1_in4>;
2622					};
2623				};
2624			};
2625
2626			in-ports {
2627				port {
2628					apss_merge_funnel_in: endpoint {
2629						remote-endpoint = <&apss_funnel_out>;
2630					};
2631				};
2632			};
2633		};
2634
2635		sdhc_2: mmc@8804000 {
2636			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
2637			reg = <0 0x08804000 0 0x1000>;
2638
2639			iommus = <&apps_smmu 0x80 0>;
2640			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
2641					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
2642			interrupt-names = "hc_irq", "pwr_irq";
2643
2644			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2645				 <&gcc GCC_SDCC2_APPS_CLK>,
2646				 <&rpmhcc RPMH_CXO_CLK>;
2647			clock-names = "iface", "core", "xo";
2648
2649			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
2650					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
2651			interconnect-names = "sdhc-ddr","cpu-sdhc";
2652			power-domains = <&rpmhpd SC7180_CX>;
2653			operating-points-v2 = <&sdhc2_opp_table>;
2654
2655			bus-width = <4>;
2656
2657			status = "disabled";
2658
2659			sdhc2_opp_table: opp-table {
2660				compatible = "operating-points-v2";
2661
2662				opp-100000000 {
2663					opp-hz = /bits/ 64 <100000000>;
2664					required-opps = <&rpmhpd_opp_low_svs>;
2665					opp-peak-kBps = <1800000 600000>;
2666					opp-avg-kBps = <100000 0>;
2667				};
2668
2669				opp-202000000 {
2670					opp-hz = /bits/ 64 <202000000>;
2671					required-opps = <&rpmhpd_opp_nom>;
2672					opp-peak-kBps = <5400000 1600000>;
2673					opp-avg-kBps = <200000 0>;
2674				};
2675			};
2676		};
2677
2678		qspi: spi@88dc000 {
2679			compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
2680			reg = <0 0x088dc000 0 0x600>;
2681			#address-cells = <1>;
2682			#size-cells = <0>;
2683			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
2684			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
2685				 <&gcc GCC_QSPI_CORE_CLK>;
2686			clock-names = "iface", "core";
2687			interconnects = <&gem_noc MASTER_APPSS_PROC 0
2688					&config_noc SLAVE_QSPI_0 0>;
2689			interconnect-names = "qspi-config";
2690			power-domains = <&rpmhpd SC7180_CX>;
2691			operating-points-v2 = <&qspi_opp_table>;
2692			status = "disabled";
2693		};
2694
2695		usb_1_hsphy: phy@88e3000 {
2696			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
2697			reg = <0 0x088e3000 0 0x400>;
2698			status = "disabled";
2699			#phy-cells = <0>;
2700			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2701				 <&rpmhcc RPMH_CXO_CLK>;
2702			clock-names = "cfg_ahb", "ref";
2703			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2704
2705			nvmem-cells = <&qusb2p_hstx_trim>;
2706		};
2707
2708		usb_1_qmpphy: phy-wrapper@88e9000 {
2709			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
2710			reg = <0 0x088e9000 0 0x18c>,
2711			      <0 0x088e8000 0 0x3c>,
2712			      <0 0x088ea000 0 0x18c>;
2713			status = "disabled";
2714			#address-cells = <2>;
2715			#size-cells = <2>;
2716			ranges;
2717
2718			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2719				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2720				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
2721				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2722			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
2723
2724			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
2725				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
2726			reset-names = "phy", "common";
2727
2728			usb_1_ssphy: usb3-phy@88e9200 {
2729				reg = <0 0x088e9200 0 0x128>,
2730				      <0 0x088e9400 0 0x200>,
2731				      <0 0x088e9c00 0 0x218>,
2732				      <0 0x088e9600 0 0x128>,
2733				      <0 0x088e9800 0 0x200>,
2734				      <0 0x088e9a00 0 0x18>;
2735				#clock-cells = <0>;
2736				#phy-cells = <0>;
2737				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2738				clock-names = "pipe0";
2739				clock-output-names = "usb3_phy_pipe_clk_src";
2740			};
2741
2742			dp_phy: dp-phy@88ea200 {
2743				reg = <0 0x088ea200 0 0x200>,
2744				      <0 0x088ea400 0 0x200>,
2745				      <0 0x088eaa00 0 0x200>,
2746				      <0 0x088ea600 0 0x200>,
2747				      <0 0x088ea800 0 0x200>;
2748				#clock-cells = <1>;
2749				#phy-cells = <0>;
2750			};
2751		};
2752
2753		dc_noc: interconnect@9160000 {
2754			compatible = "qcom,sc7180-dc-noc";
2755			reg = <0 0x09160000 0 0x03200>;
2756			#interconnect-cells = <2>;
2757			qcom,bcm-voters = <&apps_bcm_voter>;
2758		};
2759
2760		system-cache-controller@9200000 {
2761			compatible = "qcom,sc7180-llcc";
2762			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
2763			reg-names = "llcc_base", "llcc_broadcast_base";
2764			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
2765		};
2766
2767		gem_noc: interconnect@9680000 {
2768			compatible = "qcom,sc7180-gem-noc";
2769			reg = <0 0x09680000 0 0x3e200>;
2770			#interconnect-cells = <2>;
2771			qcom,bcm-voters = <&apps_bcm_voter>;
2772		};
2773
2774		npu_noc: interconnect@9990000 {
2775			compatible = "qcom,sc7180-npu-noc";
2776			reg = <0 0x09990000 0 0x1600>;
2777			#interconnect-cells = <2>;
2778			qcom,bcm-voters = <&apps_bcm_voter>;
2779		};
2780
2781		usb_1: usb@a6f8800 {
2782			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
2783			reg = <0 0x0a6f8800 0 0x400>;
2784			status = "disabled";
2785			#address-cells = <2>;
2786			#size-cells = <2>;
2787			ranges;
2788			dma-ranges;
2789
2790			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2791				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2792				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2793				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2794				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
2795			clock-names = "cfg_noc",
2796				      "core",
2797				      "iface",
2798				      "sleep",
2799				      "mock_utmi";
2800
2801			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2802					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2803			assigned-clock-rates = <19200000>, <150000000>;
2804
2805			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
2806					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
2807					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
2808					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
2809			interrupt-names = "hs_phy_irq", "ss_phy_irq",
2810					  "dm_hs_phy_irq", "dp_hs_phy_irq";
2811
2812			power-domains = <&gcc USB30_PRIM_GDSC>;
2813			required-opps = <&rpmhpd_opp_nom>;
2814
2815			resets = <&gcc GCC_USB30_PRIM_BCR>;
2816
2817			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
2818					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
2819			interconnect-names = "usb-ddr", "apps-usb";
2820
2821			wakeup-source;
2822
2823			usb_1_dwc3: usb@a600000 {
2824				compatible = "snps,dwc3";
2825				reg = <0 0x0a600000 0 0xe000>;
2826				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2827				iommus = <&apps_smmu 0x540 0>;
2828				snps,dis_u2_susphy_quirk;
2829				snps,dis_enblslpm_quirk;
2830				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
2831				phy-names = "usb2-phy", "usb3-phy";
2832				maximum-speed = "super-speed";
2833			};
2834		};
2835
2836		venus: video-codec@aa00000 {
2837			compatible = "qcom,sc7180-venus";
2838			reg = <0 0x0aa00000 0 0xff000>;
2839			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
2840			power-domains = <&videocc VENUS_GDSC>,
2841					<&videocc VCODEC0_GDSC>,
2842					<&rpmhpd SC7180_CX>;
2843			power-domain-names = "venus", "vcodec0", "cx";
2844			operating-points-v2 = <&venus_opp_table>;
2845			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
2846				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
2847				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
2848				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
2849				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
2850			clock-names = "core", "iface", "bus",
2851				      "vcodec0_core", "vcodec0_bus";
2852			iommus = <&apps_smmu 0x0c00 0x60>;
2853			memory-region = <&venus_mem>;
2854			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
2855					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
2856			interconnect-names = "video-mem", "cpu-cfg";
2857
2858			video-decoder {
2859				compatible = "venus-decoder";
2860			};
2861
2862			video-encoder {
2863				compatible = "venus-encoder";
2864			};
2865
2866			venus_opp_table: opp-table {
2867				compatible = "operating-points-v2";
2868
2869				opp-150000000 {
2870					opp-hz = /bits/ 64 <150000000>;
2871					required-opps = <&rpmhpd_opp_low_svs>;
2872				};
2873
2874				opp-270000000 {
2875					opp-hz = /bits/ 64 <270000000>;
2876					required-opps = <&rpmhpd_opp_svs>;
2877				};
2878
2879				opp-340000000 {
2880					opp-hz = /bits/ 64 <340000000>;
2881					required-opps = <&rpmhpd_opp_svs_l1>;
2882				};
2883
2884				opp-434000000 {
2885					opp-hz = /bits/ 64 <434000000>;
2886					required-opps = <&rpmhpd_opp_nom>;
2887				};
2888
2889				opp-500000097 {
2890					opp-hz = /bits/ 64 <500000097>;
2891					required-opps = <&rpmhpd_opp_turbo>;
2892				};
2893			};
2894		};
2895
2896		videocc: clock-controller@ab00000 {
2897			compatible = "qcom,sc7180-videocc";
2898			reg = <0 0x0ab00000 0 0x10000>;
2899			clocks = <&rpmhcc RPMH_CXO_CLK>;
2900			clock-names = "bi_tcxo";
2901			#clock-cells = <1>;
2902			#reset-cells = <1>;
2903			#power-domain-cells = <1>;
2904		};
2905
2906		camnoc_virt: interconnect@ac00000 {
2907			compatible = "qcom,sc7180-camnoc-virt";
2908			reg = <0 0x0ac00000 0 0x1000>;
2909			#interconnect-cells = <2>;
2910			qcom,bcm-voters = <&apps_bcm_voter>;
2911		};
2912
2913		camcc: clock-controller@ad00000 {
2914			compatible = "qcom,sc7180-camcc";
2915			reg = <0 0x0ad00000 0 0x10000>;
2916			clocks = <&rpmhcc RPMH_CXO_CLK>,
2917			       <&gcc GCC_CAMERA_AHB_CLK>,
2918			       <&gcc GCC_CAMERA_XO_CLK>;
2919			clock-names = "bi_tcxo", "iface", "xo";
2920			#clock-cells = <1>;
2921			#reset-cells = <1>;
2922			#power-domain-cells = <1>;
2923		};
2924
2925		mdss: display-subsystem@ae00000 {
2926			compatible = "qcom,sc7180-mdss";
2927			reg = <0 0x0ae00000 0 0x1000>;
2928			reg-names = "mdss";
2929
2930			power-domains = <&dispcc MDSS_GDSC>;
2931
2932			clocks = <&gcc GCC_DISP_AHB_CLK>,
2933				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2934				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
2935			clock-names = "iface", "ahb", "core";
2936
2937			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2938			interrupt-controller;
2939			#interrupt-cells = <1>;
2940
2941			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
2942			interconnect-names = "mdp0-mem";
2943
2944			iommus = <&apps_smmu 0x800 0x2>;
2945
2946			#address-cells = <2>;
2947			#size-cells = <2>;
2948			ranges;
2949
2950			status = "disabled";
2951
2952			mdp: display-controller@ae01000 {
2953				compatible = "qcom,sc7180-dpu";
2954				reg = <0 0x0ae01000 0 0x8f000>,
2955				      <0 0x0aeb0000 0 0x2008>;
2956				reg-names = "mdp", "vbif";
2957
2958				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
2959					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2960					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
2961					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
2962					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
2963					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2964				clock-names = "bus", "iface", "rot", "lut", "core",
2965					      "vsync";
2966				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
2967						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
2968						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
2969				assigned-clock-rates = <19200000>,
2970						       <19200000>,
2971						       <19200000>;
2972				operating-points-v2 = <&mdp_opp_table>;
2973				power-domains = <&rpmhpd SC7180_CX>;
2974
2975				interrupt-parent = <&mdss>;
2976				interrupts = <0>;
2977
2978				status = "disabled";
2979
2980				ports {
2981					#address-cells = <1>;
2982					#size-cells = <0>;
2983
2984					port@0 {
2985						reg = <0>;
2986						dpu_intf1_out: endpoint {
2987							remote-endpoint = <&dsi0_in>;
2988						};
2989					};
2990
2991					port@2 {
2992						reg = <2>;
2993						dpu_intf0_out: endpoint {
2994							remote-endpoint = <&dp_in>;
2995						};
2996					};
2997				};
2998
2999				mdp_opp_table: opp-table {
3000					compatible = "operating-points-v2";
3001
3002					opp-200000000 {
3003						opp-hz = /bits/ 64 <200000000>;
3004						required-opps = <&rpmhpd_opp_low_svs>;
3005					};
3006
3007					opp-300000000 {
3008						opp-hz = /bits/ 64 <300000000>;
3009						required-opps = <&rpmhpd_opp_svs>;
3010					};
3011
3012					opp-345000000 {
3013						opp-hz = /bits/ 64 <345000000>;
3014						required-opps = <&rpmhpd_opp_svs_l1>;
3015					};
3016
3017					opp-460000000 {
3018						opp-hz = /bits/ 64 <460000000>;
3019						required-opps = <&rpmhpd_opp_nom>;
3020					};
3021				};
3022
3023			};
3024
3025			dsi0: dsi@ae94000 {
3026				compatible = "qcom,sc7180-dsi-ctrl",
3027					     "qcom,mdss-dsi-ctrl";
3028				reg = <0 0x0ae94000 0 0x400>;
3029				reg-names = "dsi_ctrl";
3030
3031				interrupt-parent = <&mdss>;
3032				interrupts = <4>;
3033
3034				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3035					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3036					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3037					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3038					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3039					 <&gcc GCC_DISP_HF_AXI_CLK>;
3040				clock-names = "byte",
3041					      "byte_intf",
3042					      "pixel",
3043					      "core",
3044					      "iface",
3045					      "bus";
3046
3047				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3048				assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
3049
3050				operating-points-v2 = <&dsi_opp_table>;
3051				power-domains = <&rpmhpd SC7180_CX>;
3052
3053				phys = <&dsi_phy>;
3054
3055				#address-cells = <1>;
3056				#size-cells = <0>;
3057
3058				status = "disabled";
3059
3060				ports {
3061					#address-cells = <1>;
3062					#size-cells = <0>;
3063
3064					port@0 {
3065						reg = <0>;
3066						dsi0_in: endpoint {
3067							remote-endpoint = <&dpu_intf1_out>;
3068						};
3069					};
3070
3071					port@1 {
3072						reg = <1>;
3073						dsi0_out: endpoint {
3074						};
3075					};
3076				};
3077
3078				dsi_opp_table: opp-table {
3079					compatible = "operating-points-v2";
3080
3081					opp-187500000 {
3082						opp-hz = /bits/ 64 <187500000>;
3083						required-opps = <&rpmhpd_opp_low_svs>;
3084					};
3085
3086					opp-300000000 {
3087						opp-hz = /bits/ 64 <300000000>;
3088						required-opps = <&rpmhpd_opp_svs>;
3089					};
3090
3091					opp-358000000 {
3092						opp-hz = /bits/ 64 <358000000>;
3093						required-opps = <&rpmhpd_opp_svs_l1>;
3094					};
3095				};
3096			};
3097
3098			dsi_phy: phy@ae94400 {
3099				compatible = "qcom,dsi-phy-10nm";
3100				reg = <0 0x0ae94400 0 0x200>,
3101				      <0 0x0ae94600 0 0x280>,
3102				      <0 0x0ae94a00 0 0x1e0>;
3103				reg-names = "dsi_phy",
3104					    "dsi_phy_lane",
3105					    "dsi_pll";
3106
3107				#clock-cells = <1>;
3108				#phy-cells = <0>;
3109
3110				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3111					 <&rpmhcc RPMH_CXO_CLK>;
3112				clock-names = "iface", "ref";
3113
3114				status = "disabled";
3115			};
3116
3117			mdss_dp: displayport-controller@ae90000 {
3118				compatible = "qcom,sc7180-dp";
3119				status = "disabled";
3120
3121				reg = <0 0x0ae90000 0 0x200>,
3122				      <0 0x0ae90200 0 0x200>,
3123				      <0 0x0ae90400 0 0xc00>,
3124				      <0 0x0ae91000 0 0x400>,
3125				      <0 0x0ae91400 0 0x400>;
3126
3127				interrupt-parent = <&mdss>;
3128				interrupts = <12>;
3129
3130				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3131					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
3132					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
3133					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
3134					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
3135				clock-names = "core_iface", "core_aux", "ctrl_link",
3136					      "ctrl_link_iface", "stream_pixel";
3137				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
3138						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
3139				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
3140				phys = <&dp_phy>;
3141				phy-names = "dp";
3142
3143				operating-points-v2 = <&dp_opp_table>;
3144				power-domains = <&rpmhpd SC7180_CX>;
3145
3146				#sound-dai-cells = <0>;
3147
3148				ports {
3149					#address-cells = <1>;
3150					#size-cells = <0>;
3151					port@0 {
3152						reg = <0>;
3153						dp_in: endpoint {
3154							remote-endpoint = <&dpu_intf0_out>;
3155						};
3156					};
3157
3158					port@1 {
3159						reg = <1>;
3160						mdss_dp_out: endpoint { };
3161					};
3162				};
3163
3164				dp_opp_table: opp-table {
3165					compatible = "operating-points-v2";
3166
3167					opp-160000000 {
3168						opp-hz = /bits/ 64 <160000000>;
3169						required-opps = <&rpmhpd_opp_low_svs>;
3170					};
3171
3172					opp-270000000 {
3173						opp-hz = /bits/ 64 <270000000>;
3174						required-opps = <&rpmhpd_opp_svs>;
3175					};
3176
3177					opp-540000000 {
3178						opp-hz = /bits/ 64 <540000000>;
3179						required-opps = <&rpmhpd_opp_svs_l1>;
3180					};
3181
3182					opp-810000000 {
3183						opp-hz = /bits/ 64 <810000000>;
3184						required-opps = <&rpmhpd_opp_nom>;
3185					};
3186				};
3187			};
3188		};
3189
3190		dispcc: clock-controller@af00000 {
3191			compatible = "qcom,sc7180-dispcc";
3192			reg = <0 0x0af00000 0 0x200000>;
3193			clocks = <&rpmhcc RPMH_CXO_CLK>,
3194				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
3195				 <&dsi_phy 0>,
3196				 <&dsi_phy 1>,
3197				 <&dp_phy 0>,
3198				 <&dp_phy 1>;
3199			clock-names = "bi_tcxo",
3200				      "gcc_disp_gpll0_clk_src",
3201				      "dsi0_phy_pll_out_byteclk",
3202				      "dsi0_phy_pll_out_dsiclk",
3203				      "dp_phy_pll_link_clk",
3204				      "dp_phy_pll_vco_div_clk";
3205			#clock-cells = <1>;
3206			#reset-cells = <1>;
3207			#power-domain-cells = <1>;
3208		};
3209
3210		pdc: interrupt-controller@b220000 {
3211			compatible = "qcom,sc7180-pdc", "qcom,pdc";
3212			reg = <0 0x0b220000 0 0x30000>;
3213			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
3214			#interrupt-cells = <2>;
3215			interrupt-parent = <&intc>;
3216			interrupt-controller;
3217		};
3218
3219		pdc_reset: reset-controller@b2e0000 {
3220			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
3221			reg = <0 0x0b2e0000 0 0x20000>;
3222			#reset-cells = <1>;
3223		};
3224
3225		tsens0: thermal-sensor@c263000 {
3226			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
3227			reg = <0 0x0c263000 0 0x1ff>, /* TM */
3228				<0 0x0c222000 0 0x1ff>; /* SROT */
3229			#qcom,sensors = <15>;
3230			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3231				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3232			interrupt-names = "uplow","critical";
3233			#thermal-sensor-cells = <1>;
3234		};
3235
3236		tsens1: thermal-sensor@c265000 {
3237			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
3238			reg = <0 0x0c265000 0 0x1ff>, /* TM */
3239				<0 0x0c223000 0 0x1ff>; /* SROT */
3240			#qcom,sensors = <10>;
3241			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3242				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3243			interrupt-names = "uplow","critical";
3244			#thermal-sensor-cells = <1>;
3245		};
3246
3247		aoss_reset: reset-controller@c2a0000 {
3248			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
3249			reg = <0 0x0c2a0000 0 0x31000>;
3250			#reset-cells = <1>;
3251		};
3252
3253		aoss_qmp: power-management@c300000 {
3254			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
3255			reg = <0 0x0c300000 0 0x400>;
3256			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
3257			mboxes = <&apss_shared 0>;
3258
3259			#clock-cells = <0>;
3260		};
3261
3262		sram@c3f0000 {
3263			compatible = "qcom,rpmh-stats";
3264			reg = <0 0x0c3f0000 0 0x400>;
3265		};
3266
3267		spmi_bus: spmi@c440000 {
3268			compatible = "qcom,spmi-pmic-arb";
3269			reg = <0 0x0c440000 0 0x1100>,
3270			      <0 0x0c600000 0 0x2000000>,
3271			      <0 0x0e600000 0 0x100000>,
3272			      <0 0x0e700000 0 0xa0000>,
3273			      <0 0x0c40a000 0 0x26000>;
3274			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3275			interrupt-names = "periph_irq";
3276			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3277			qcom,ee = <0>;
3278			qcom,channel = <0>;
3279			#address-cells = <2>;
3280			#size-cells = <0>;
3281			interrupt-controller;
3282			#interrupt-cells = <4>;
3283			cell-index = <0>;
3284		};
3285
3286		sram@146aa000 {
3287			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
3288			reg = <0 0x146aa000 0 0x2000>;
3289
3290			#address-cells = <1>;
3291			#size-cells = <1>;
3292
3293			ranges = <0 0 0x146aa000 0x2000>;
3294
3295			pil-reloc@94c {
3296				compatible = "qcom,pil-reloc-info";
3297				reg = <0x94c 0xc8>;
3298			};
3299		};
3300
3301		apps_smmu: iommu@15000000 {
3302			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
3303			reg = <0 0x15000000 0 0x100000>;
3304			#iommu-cells = <2>;
3305			#global-interrupts = <1>;
3306			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3307				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
3308				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
3309				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
3310				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3311				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3312				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3313				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3314				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3315				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3316				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3317				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3318				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3319				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3320				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3321				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3322				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3323				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3324				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3325				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3326				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3327				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3328				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3329				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3330				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3331				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3332				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3333				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3334				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3335				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3336				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3337				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3338				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3339				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3340				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3341				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3342				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3343				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3344				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3345				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3346				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3347				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3348				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3349				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3350				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3351				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3352				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3353				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3354				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3355				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3356				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3357				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3358				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3359				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3360				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3361				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3362				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3363				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3364				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3365				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3366				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3367				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3368				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3369				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3370				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3371				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3372				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3373				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3374				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3375				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3376				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3377				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3378				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3379				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3380				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3381				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3382				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3383				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3384				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
3385				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
3386				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
3387		};
3388
3389		intc: interrupt-controller@17a00000 {
3390			compatible = "arm,gic-v3";
3391			#address-cells = <2>;
3392			#size-cells = <2>;
3393			ranges;
3394			#interrupt-cells = <3>;
3395			interrupt-controller;
3396			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
3397			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
3398			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3399
3400			msi-controller@17a40000 {
3401				compatible = "arm,gic-v3-its";
3402				msi-controller;
3403				#msi-cells = <1>;
3404				reg = <0 0x17a40000 0 0x20000>;
3405				status = "disabled";
3406			};
3407		};
3408
3409		apss_shared: mailbox@17c00000 {
3410			compatible = "qcom,sc7180-apss-shared";
3411			reg = <0 0x17c00000 0 0x10000>;
3412			#mbox-cells = <1>;
3413		};
3414
3415		watchdog@17c10000 {
3416			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
3417			reg = <0 0x17c10000 0 0x1000>;
3418			clocks = <&sleep_clk>;
3419			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
3420		};
3421
3422		timer@17c20000 {
3423			#address-cells = <1>;
3424			#size-cells = <1>;
3425			ranges = <0 0 0 0x20000000>;
3426			compatible = "arm,armv7-timer-mem";
3427			reg = <0 0x17c20000 0 0x1000>;
3428
3429			frame@17c21000 {
3430				frame-number = <0>;
3431				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3432					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3433				reg = <0x17c21000 0x1000>,
3434				      <0x17c22000 0x1000>;
3435			};
3436
3437			frame@17c23000 {
3438				frame-number = <1>;
3439				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3440				reg = <0x17c23000 0x1000>;
3441				status = "disabled";
3442			};
3443
3444			frame@17c25000 {
3445				frame-number = <2>;
3446				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3447				reg = <0x17c25000 0x1000>;
3448				status = "disabled";
3449			};
3450
3451			frame@17c27000 {
3452				frame-number = <3>;
3453				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3454				reg = <0x17c27000 0x1000>;
3455				status = "disabled";
3456			};
3457
3458			frame@17c29000 {
3459				frame-number = <4>;
3460				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3461				reg = <0x17c29000 0x1000>;
3462				status = "disabled";
3463			};
3464
3465			frame@17c2b000 {
3466				frame-number = <5>;
3467				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3468				reg = <0x17c2b000 0x1000>;
3469				status = "disabled";
3470			};
3471
3472			frame@17c2d000 {
3473				frame-number = <6>;
3474				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3475				reg = <0x17c2d000 0x1000>;
3476				status = "disabled";
3477			};
3478		};
3479
3480		apps_rsc: rsc@18200000 {
3481			compatible = "qcom,rpmh-rsc";
3482			reg = <0 0x18200000 0 0x10000>,
3483			      <0 0x18210000 0 0x10000>,
3484			      <0 0x18220000 0 0x10000>;
3485			reg-names = "drv-0", "drv-1", "drv-2";
3486			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3487				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3488				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3489			qcom,tcs-offset = <0xd00>;
3490			qcom,drv-id = <2>;
3491			qcom,tcs-config = <ACTIVE_TCS  2>,
3492					  <SLEEP_TCS   3>,
3493					  <WAKE_TCS    3>,
3494					  <CONTROL_TCS 1>;
3495
3496			rpmhcc: clock-controller {
3497				compatible = "qcom,sc7180-rpmh-clk";
3498				clocks = <&xo_board>;
3499				clock-names = "xo";
3500				#clock-cells = <1>;
3501			};
3502
3503			rpmhpd: power-controller {
3504				compatible = "qcom,sc7180-rpmhpd";
3505				#power-domain-cells = <1>;
3506				operating-points-v2 = <&rpmhpd_opp_table>;
3507
3508				rpmhpd_opp_table: opp-table {
3509					compatible = "operating-points-v2";
3510
3511					rpmhpd_opp_ret: opp1 {
3512						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3513					};
3514
3515					rpmhpd_opp_min_svs: opp2 {
3516						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3517					};
3518
3519					rpmhpd_opp_low_svs: opp3 {
3520						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3521					};
3522
3523					rpmhpd_opp_svs: opp4 {
3524						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3525					};
3526
3527					rpmhpd_opp_svs_l1: opp5 {
3528						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3529					};
3530
3531					rpmhpd_opp_svs_l2: opp6 {
3532						opp-level = <224>;
3533					};
3534
3535					rpmhpd_opp_nom: opp7 {
3536						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3537					};
3538
3539					rpmhpd_opp_nom_l1: opp8 {
3540						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3541					};
3542
3543					rpmhpd_opp_nom_l2: opp9 {
3544						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3545					};
3546
3547					rpmhpd_opp_turbo: opp10 {
3548						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3549					};
3550
3551					rpmhpd_opp_turbo_l1: opp11 {
3552						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3553					};
3554				};
3555			};
3556
3557			apps_bcm_voter: bcm-voter {
3558				compatible = "qcom,bcm-voter";
3559			};
3560		};
3561
3562		osm_l3: interconnect@18321000 {
3563			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
3564			reg = <0 0x18321000 0 0x1400>;
3565
3566			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3567			clock-names = "xo", "alternate";
3568
3569			#interconnect-cells = <1>;
3570		};
3571
3572		cpufreq_hw: cpufreq@18323000 {
3573			compatible = "qcom,cpufreq-hw";
3574			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
3575			reg-names = "freq-domain0", "freq-domain1";
3576
3577			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3578			clock-names = "xo", "alternate";
3579
3580			#freq-domain-cells = <1>;
3581		};
3582
3583		wifi: wifi@18800000 {
3584			compatible = "qcom,wcn3990-wifi";
3585			reg = <0 0x18800000 0 0x800000>;
3586			reg-names = "membase";
3587			iommus = <&apps_smmu 0xc0 0x1>;
3588			interrupts =
3589				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
3590				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
3591				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
3592				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
3593				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
3594				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
3595				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
3596				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
3597				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
3598				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
3599				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
3600				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
3601			memory-region = <&wlan_mem>;
3602			qcom,msa-fixed-perm;
3603			status = "disabled";
3604		};
3605
3606		lpasscc: clock-controller@62d00000 {
3607			compatible = "qcom,sc7180-lpasscorecc";
3608			reg = <0 0x62d00000 0 0x50000>,
3609			      <0 0x62780000 0 0x30000>;
3610			reg-names = "lpass_core_cc", "lpass_audio_cc";
3611			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3612				 <&rpmhcc RPMH_CXO_CLK>;
3613			clock-names = "iface", "bi_tcxo";
3614			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
3615			#clock-cells = <1>;
3616			#power-domain-cells = <1>;
3617		};
3618
3619		lpass_cpu: lpass@62d87000 {
3620			compatible = "qcom,sc7180-lpass-cpu";
3621
3622			reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
3623			reg-names = "lpass-hdmiif", "lpass-lpaif";
3624
3625			iommus = <&apps_smmu 0x1020 0>,
3626				<&apps_smmu 0x1021 0>,
3627				<&apps_smmu 0x1032 0>;
3628
3629			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
3630			required-opps = <&rpmhpd_opp_nom>;
3631
3632			status = "disabled";
3633
3634			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3635				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
3636				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
3637				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
3638				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
3639				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
3640
3641			clock-names = "pcnoc-sway-clk", "audio-core",
3642					"mclk0", "pcnoc-mport-clk",
3643					"mi2s-bit-clk0", "mi2s-bit-clk1";
3644
3645
3646			#sound-dai-cells = <1>;
3647			#address-cells = <1>;
3648			#size-cells = <0>;
3649
3650			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
3651					<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
3652			interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
3653		};
3654
3655		lpass_hm: clock-controller@63000000 {
3656			compatible = "qcom,sc7180-lpasshm";
3657			reg = <0 0x63000000 0 0x28>;
3658			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3659				 <&rpmhcc RPMH_CXO_CLK>;
3660			clock-names = "iface", "bi_tcxo";
3661			power-domains = <&rpmhpd SC7180_CX>;
3662
3663			#clock-cells = <1>;
3664			#power-domain-cells = <1>;
3665		};
3666	};
3667
3668	thermal-zones {
3669		cpu0_thermal: cpu0-thermal {
3670			polling-delay-passive = <250>;
3671			polling-delay = <0>;
3672
3673			thermal-sensors = <&tsens0 1>;
3674			sustainable-power = <1052>;
3675
3676			trips {
3677				cpu0_alert0: trip-point0 {
3678					temperature = <90000>;
3679					hysteresis = <2000>;
3680					type = "passive";
3681				};
3682
3683				cpu0_alert1: trip-point1 {
3684					temperature = <95000>;
3685					hysteresis = <2000>;
3686					type = "passive";
3687				};
3688
3689				cpu0_crit: cpu-crit {
3690					temperature = <110000>;
3691					hysteresis = <1000>;
3692					type = "critical";
3693				};
3694			};
3695
3696			cooling-maps {
3697				map0 {
3698					trip = <&cpu0_alert0>;
3699					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3700							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3701							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3702							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3703							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3704							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3705				};
3706				map1 {
3707					trip = <&cpu0_alert1>;
3708					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3709							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3710							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3711							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3712							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3713							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3714				};
3715			};
3716		};
3717
3718		cpu1_thermal: cpu1-thermal {
3719			polling-delay-passive = <250>;
3720			polling-delay = <0>;
3721
3722			thermal-sensors = <&tsens0 2>;
3723			sustainable-power = <1052>;
3724
3725			trips {
3726				cpu1_alert0: trip-point0 {
3727					temperature = <90000>;
3728					hysteresis = <2000>;
3729					type = "passive";
3730				};
3731
3732				cpu1_alert1: trip-point1 {
3733					temperature = <95000>;
3734					hysteresis = <2000>;
3735					type = "passive";
3736				};
3737
3738				cpu1_crit: cpu-crit {
3739					temperature = <110000>;
3740					hysteresis = <1000>;
3741					type = "critical";
3742				};
3743			};
3744
3745			cooling-maps {
3746				map0 {
3747					trip = <&cpu1_alert0>;
3748					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3749							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3750							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3751							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3752							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3753							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3754				};
3755				map1 {
3756					trip = <&cpu1_alert1>;
3757					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3758							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3759							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3760							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3761							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3762							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3763				};
3764			};
3765		};
3766
3767		cpu2_thermal: cpu2-thermal {
3768			polling-delay-passive = <250>;
3769			polling-delay = <0>;
3770
3771			thermal-sensors = <&tsens0 3>;
3772			sustainable-power = <1052>;
3773
3774			trips {
3775				cpu2_alert0: trip-point0 {
3776					temperature = <90000>;
3777					hysteresis = <2000>;
3778					type = "passive";
3779				};
3780
3781				cpu2_alert1: trip-point1 {
3782					temperature = <95000>;
3783					hysteresis = <2000>;
3784					type = "passive";
3785				};
3786
3787				cpu2_crit: cpu-crit {
3788					temperature = <110000>;
3789					hysteresis = <1000>;
3790					type = "critical";
3791				};
3792			};
3793
3794			cooling-maps {
3795				map0 {
3796					trip = <&cpu2_alert0>;
3797					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3798							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3799							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3800							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3801							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3802							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3803				};
3804				map1 {
3805					trip = <&cpu2_alert1>;
3806					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3807							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3808							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3809							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3810							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3811							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3812				};
3813			};
3814		};
3815
3816		cpu3_thermal: cpu3-thermal {
3817			polling-delay-passive = <250>;
3818			polling-delay = <0>;
3819
3820			thermal-sensors = <&tsens0 4>;
3821			sustainable-power = <1052>;
3822
3823			trips {
3824				cpu3_alert0: trip-point0 {
3825					temperature = <90000>;
3826					hysteresis = <2000>;
3827					type = "passive";
3828				};
3829
3830				cpu3_alert1: trip-point1 {
3831					temperature = <95000>;
3832					hysteresis = <2000>;
3833					type = "passive";
3834				};
3835
3836				cpu3_crit: cpu-crit {
3837					temperature = <110000>;
3838					hysteresis = <1000>;
3839					type = "critical";
3840				};
3841			};
3842
3843			cooling-maps {
3844				map0 {
3845					trip = <&cpu3_alert0>;
3846					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3847							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3848							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3849							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3850							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3851							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3852				};
3853				map1 {
3854					trip = <&cpu3_alert1>;
3855					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3856							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3857							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3858							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3859							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3860							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3861				};
3862			};
3863		};
3864
3865		cpu4_thermal: cpu4-thermal {
3866			polling-delay-passive = <250>;
3867			polling-delay = <0>;
3868
3869			thermal-sensors = <&tsens0 5>;
3870			sustainable-power = <1052>;
3871
3872			trips {
3873				cpu4_alert0: trip-point0 {
3874					temperature = <90000>;
3875					hysteresis = <2000>;
3876					type = "passive";
3877				};
3878
3879				cpu4_alert1: trip-point1 {
3880					temperature = <95000>;
3881					hysteresis = <2000>;
3882					type = "passive";
3883				};
3884
3885				cpu4_crit: cpu-crit {
3886					temperature = <110000>;
3887					hysteresis = <1000>;
3888					type = "critical";
3889				};
3890			};
3891
3892			cooling-maps {
3893				map0 {
3894					trip = <&cpu4_alert0>;
3895					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3896							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3897							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3898							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3899							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3900							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3901				};
3902				map1 {
3903					trip = <&cpu4_alert1>;
3904					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3905							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3906							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3907							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3908							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3909							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3910				};
3911			};
3912		};
3913
3914		cpu5_thermal: cpu5-thermal {
3915			polling-delay-passive = <250>;
3916			polling-delay = <0>;
3917
3918			thermal-sensors = <&tsens0 6>;
3919			sustainable-power = <1052>;
3920
3921			trips {
3922				cpu5_alert0: trip-point0 {
3923					temperature = <90000>;
3924					hysteresis = <2000>;
3925					type = "passive";
3926				};
3927
3928				cpu5_alert1: trip-point1 {
3929					temperature = <95000>;
3930					hysteresis = <2000>;
3931					type = "passive";
3932				};
3933
3934				cpu5_crit: cpu-crit {
3935					temperature = <110000>;
3936					hysteresis = <1000>;
3937					type = "critical";
3938				};
3939			};
3940
3941			cooling-maps {
3942				map0 {
3943					trip = <&cpu5_alert0>;
3944					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3945							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3946							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3947							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3948							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3949							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3950				};
3951				map1 {
3952					trip = <&cpu5_alert1>;
3953					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3954							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3955							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3956							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3957							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3958							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3959				};
3960			};
3961		};
3962
3963		cpu6_thermal: cpu6-thermal {
3964			polling-delay-passive = <250>;
3965			polling-delay = <0>;
3966
3967			thermal-sensors = <&tsens0 9>;
3968			sustainable-power = <1425>;
3969
3970			trips {
3971				cpu6_alert0: trip-point0 {
3972					temperature = <90000>;
3973					hysteresis = <2000>;
3974					type = "passive";
3975				};
3976
3977				cpu6_alert1: trip-point1 {
3978					temperature = <95000>;
3979					hysteresis = <2000>;
3980					type = "passive";
3981				};
3982
3983				cpu6_crit: cpu-crit {
3984					temperature = <110000>;
3985					hysteresis = <1000>;
3986					type = "critical";
3987				};
3988			};
3989
3990			cooling-maps {
3991				map0 {
3992					trip = <&cpu6_alert0>;
3993					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3994							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3995				};
3996				map1 {
3997					trip = <&cpu6_alert1>;
3998					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3999							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4000				};
4001			};
4002		};
4003
4004		cpu7_thermal: cpu7-thermal {
4005			polling-delay-passive = <250>;
4006			polling-delay = <0>;
4007
4008			thermal-sensors = <&tsens0 10>;
4009			sustainable-power = <1425>;
4010
4011			trips {
4012				cpu7_alert0: trip-point0 {
4013					temperature = <90000>;
4014					hysteresis = <2000>;
4015					type = "passive";
4016				};
4017
4018				cpu7_alert1: trip-point1 {
4019					temperature = <95000>;
4020					hysteresis = <2000>;
4021					type = "passive";
4022				};
4023
4024				cpu7_crit: cpu-crit {
4025					temperature = <110000>;
4026					hysteresis = <1000>;
4027					type = "critical";
4028				};
4029			};
4030
4031			cooling-maps {
4032				map0 {
4033					trip = <&cpu7_alert0>;
4034					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4035							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4036				};
4037				map1 {
4038					trip = <&cpu7_alert1>;
4039					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4040							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4041				};
4042			};
4043		};
4044
4045		cpu8_thermal: cpu8-thermal {
4046			polling-delay-passive = <250>;
4047			polling-delay = <0>;
4048
4049			thermal-sensors = <&tsens0 11>;
4050			sustainable-power = <1425>;
4051
4052			trips {
4053				cpu8_alert0: trip-point0 {
4054					temperature = <90000>;
4055					hysteresis = <2000>;
4056					type = "passive";
4057				};
4058
4059				cpu8_alert1: trip-point1 {
4060					temperature = <95000>;
4061					hysteresis = <2000>;
4062					type = "passive";
4063				};
4064
4065				cpu8_crit: cpu-crit {
4066					temperature = <110000>;
4067					hysteresis = <1000>;
4068					type = "critical";
4069				};
4070			};
4071
4072			cooling-maps {
4073				map0 {
4074					trip = <&cpu8_alert0>;
4075					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4076							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4077				};
4078				map1 {
4079					trip = <&cpu8_alert1>;
4080					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4081							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4082				};
4083			};
4084		};
4085
4086		cpu9_thermal: cpu9-thermal {
4087			polling-delay-passive = <250>;
4088			polling-delay = <0>;
4089
4090			thermal-sensors = <&tsens0 12>;
4091			sustainable-power = <1425>;
4092
4093			trips {
4094				cpu9_alert0: trip-point0 {
4095					temperature = <90000>;
4096					hysteresis = <2000>;
4097					type = "passive";
4098				};
4099
4100				cpu9_alert1: trip-point1 {
4101					temperature = <95000>;
4102					hysteresis = <2000>;
4103					type = "passive";
4104				};
4105
4106				cpu9_crit: cpu-crit {
4107					temperature = <110000>;
4108					hysteresis = <1000>;
4109					type = "critical";
4110				};
4111			};
4112
4113			cooling-maps {
4114				map0 {
4115					trip = <&cpu9_alert0>;
4116					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4117							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4118				};
4119				map1 {
4120					trip = <&cpu9_alert1>;
4121					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4122							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4123				};
4124			};
4125		};
4126
4127		aoss0-thermal {
4128			polling-delay-passive = <250>;
4129			polling-delay = <0>;
4130
4131			thermal-sensors = <&tsens0 0>;
4132
4133			trips {
4134				aoss0_alert0: trip-point0 {
4135					temperature = <90000>;
4136					hysteresis = <2000>;
4137					type = "hot";
4138				};
4139
4140				aoss0_crit: aoss0-crit {
4141					temperature = <110000>;
4142					hysteresis = <2000>;
4143					type = "critical";
4144				};
4145			};
4146		};
4147
4148		cpuss0-thermal {
4149			polling-delay-passive = <250>;
4150			polling-delay = <0>;
4151
4152			thermal-sensors = <&tsens0 7>;
4153
4154			trips {
4155				cpuss0_alert0: trip-point0 {
4156					temperature = <90000>;
4157					hysteresis = <2000>;
4158					type = "hot";
4159				};
4160				cpuss0_crit: cluster0-crit {
4161					temperature = <110000>;
4162					hysteresis = <2000>;
4163					type = "critical";
4164				};
4165			};
4166		};
4167
4168		cpuss1-thermal {
4169			polling-delay-passive = <250>;
4170			polling-delay = <0>;
4171
4172			thermal-sensors = <&tsens0 8>;
4173
4174			trips {
4175				cpuss1_alert0: trip-point0 {
4176					temperature = <90000>;
4177					hysteresis = <2000>;
4178					type = "hot";
4179				};
4180				cpuss1_crit: cluster0-crit {
4181					temperature = <110000>;
4182					hysteresis = <2000>;
4183					type = "critical";
4184				};
4185			};
4186		};
4187
4188		gpuss0-thermal {
4189			polling-delay-passive = <250>;
4190			polling-delay = <0>;
4191
4192			thermal-sensors = <&tsens0 13>;
4193
4194			trips {
4195				gpuss0_alert0: trip-point0 {
4196					temperature = <95000>;
4197					hysteresis = <2000>;
4198					type = "passive";
4199				};
4200
4201				gpuss0_crit: gpuss0-crit {
4202					temperature = <110000>;
4203					hysteresis = <2000>;
4204					type = "critical";
4205				};
4206			};
4207
4208			cooling-maps {
4209				map0 {
4210					trip = <&gpuss0_alert0>;
4211					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4212				};
4213			};
4214		};
4215
4216		gpuss1-thermal {
4217			polling-delay-passive = <250>;
4218			polling-delay = <0>;
4219
4220			thermal-sensors = <&tsens0 14>;
4221
4222			trips {
4223				gpuss1_alert0: trip-point0 {
4224					temperature = <95000>;
4225					hysteresis = <2000>;
4226					type = "passive";
4227				};
4228
4229				gpuss1_crit: gpuss1-crit {
4230					temperature = <110000>;
4231					hysteresis = <2000>;
4232					type = "critical";
4233				};
4234			};
4235
4236			cooling-maps {
4237				map0 {
4238					trip = <&gpuss1_alert0>;
4239					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4240				};
4241			};
4242		};
4243
4244		aoss1-thermal {
4245			polling-delay-passive = <250>;
4246			polling-delay = <0>;
4247
4248			thermal-sensors = <&tsens1 0>;
4249
4250			trips {
4251				aoss1_alert0: trip-point0 {
4252					temperature = <90000>;
4253					hysteresis = <2000>;
4254					type = "hot";
4255				};
4256
4257				aoss1_crit: aoss1-crit {
4258					temperature = <110000>;
4259					hysteresis = <2000>;
4260					type = "critical";
4261				};
4262			};
4263		};
4264
4265		cwlan-thermal {
4266			polling-delay-passive = <250>;
4267			polling-delay = <0>;
4268
4269			thermal-sensors = <&tsens1 1>;
4270
4271			trips {
4272				cwlan_alert0: trip-point0 {
4273					temperature = <90000>;
4274					hysteresis = <2000>;
4275					type = "hot";
4276				};
4277
4278				cwlan_crit: cwlan-crit {
4279					temperature = <110000>;
4280					hysteresis = <2000>;
4281					type = "critical";
4282				};
4283			};
4284		};
4285
4286		audio-thermal {
4287			polling-delay-passive = <250>;
4288			polling-delay = <0>;
4289
4290			thermal-sensors = <&tsens1 2>;
4291
4292			trips {
4293				audio_alert0: trip-point0 {
4294					temperature = <90000>;
4295					hysteresis = <2000>;
4296					type = "hot";
4297				};
4298
4299				audio_crit: audio-crit {
4300					temperature = <110000>;
4301					hysteresis = <2000>;
4302					type = "critical";
4303				};
4304			};
4305		};
4306
4307		ddr-thermal {
4308			polling-delay-passive = <250>;
4309			polling-delay = <0>;
4310
4311			thermal-sensors = <&tsens1 3>;
4312
4313			trips {
4314				ddr_alert0: trip-point0 {
4315					temperature = <90000>;
4316					hysteresis = <2000>;
4317					type = "hot";
4318				};
4319
4320				ddr_crit: ddr-crit {
4321					temperature = <110000>;
4322					hysteresis = <2000>;
4323					type = "critical";
4324				};
4325			};
4326		};
4327
4328		q6-hvx-thermal {
4329			polling-delay-passive = <250>;
4330			polling-delay = <0>;
4331
4332			thermal-sensors = <&tsens1 4>;
4333
4334			trips {
4335				q6_hvx_alert0: trip-point0 {
4336					temperature = <90000>;
4337					hysteresis = <2000>;
4338					type = "hot";
4339				};
4340
4341				q6_hvx_crit: q6-hvx-crit {
4342					temperature = <110000>;
4343					hysteresis = <2000>;
4344					type = "critical";
4345				};
4346			};
4347		};
4348
4349		camera-thermal {
4350			polling-delay-passive = <250>;
4351			polling-delay = <0>;
4352
4353			thermal-sensors = <&tsens1 5>;
4354
4355			trips {
4356				camera_alert0: trip-point0 {
4357					temperature = <90000>;
4358					hysteresis = <2000>;
4359					type = "hot";
4360				};
4361
4362				camera_crit: camera-crit {
4363					temperature = <110000>;
4364					hysteresis = <2000>;
4365					type = "critical";
4366				};
4367			};
4368		};
4369
4370		mdm-core-thermal {
4371			polling-delay-passive = <250>;
4372			polling-delay = <0>;
4373
4374			thermal-sensors = <&tsens1 6>;
4375
4376			trips {
4377				mdm_alert0: trip-point0 {
4378					temperature = <90000>;
4379					hysteresis = <2000>;
4380					type = "hot";
4381				};
4382
4383				mdm_crit: mdm-crit {
4384					temperature = <110000>;
4385					hysteresis = <2000>;
4386					type = "critical";
4387				};
4388			};
4389		};
4390
4391		mdm-dsp-thermal {
4392			polling-delay-passive = <250>;
4393			polling-delay = <0>;
4394
4395			thermal-sensors = <&tsens1 7>;
4396
4397			trips {
4398				mdm_dsp_alert0: trip-point0 {
4399					temperature = <90000>;
4400					hysteresis = <2000>;
4401					type = "hot";
4402				};
4403
4404				mdm_dsp_crit: mdm-dsp-crit {
4405					temperature = <110000>;
4406					hysteresis = <2000>;
4407					type = "critical";
4408				};
4409			};
4410		};
4411
4412		npu-thermal {
4413			polling-delay-passive = <250>;
4414			polling-delay = <0>;
4415
4416			thermal-sensors = <&tsens1 8>;
4417
4418			trips {
4419				npu_alert0: trip-point0 {
4420					temperature = <90000>;
4421					hysteresis = <2000>;
4422					type = "hot";
4423				};
4424
4425				npu_crit: npu-crit {
4426					temperature = <110000>;
4427					hysteresis = <2000>;
4428					type = "critical";
4429				};
4430			};
4431		};
4432
4433		video-thermal {
4434			polling-delay-passive = <250>;
4435			polling-delay = <0>;
4436
4437			thermal-sensors = <&tsens1 9>;
4438
4439			trips {
4440				video_alert0: trip-point0 {
4441					temperature = <90000>;
4442					hysteresis = <2000>;
4443					type = "hot";
4444				};
4445
4446				video_crit: video-crit {
4447					temperature = <110000>;
4448					hysteresis = <2000>;
4449					type = "critical";
4450				};
4451			};
4452		};
4453	};
4454
4455	timer {
4456		compatible = "arm,armv8-timer";
4457		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
4458			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
4459			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
4460			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
4461	};
4462};
4463