xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sc7180.dtsi (revision 6db6b729)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * SC7180 SoC device tree source
4 *
5 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
6 */
7
8#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
9#include <dt-bindings/clock/qcom,gcc-sc7180.h>
10#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
11#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
12#include <dt-bindings/clock/qcom,rpmh.h>
13#include <dt-bindings/clock/qcom,videocc-sc7180.h>
14#include <dt-bindings/interconnect/qcom,icc.h>
15#include <dt-bindings/interconnect/qcom,osm-l3.h>
16#include <dt-bindings/interconnect/qcom,sc7180.h>
17#include <dt-bindings/interrupt-controller/arm-gic.h>
18#include <dt-bindings/phy/phy-qcom-qusb2.h>
19#include <dt-bindings/power/qcom-rpmpd.h>
20#include <dt-bindings/reset/qcom,sdm845-aoss.h>
21#include <dt-bindings/reset/qcom,sdm845-pdc.h>
22#include <dt-bindings/soc/qcom,rpmh-rsc.h>
23#include <dt-bindings/thermal/thermal.h>
24
25/ {
26	interrupt-parent = <&intc>;
27
28	#address-cells = <2>;
29	#size-cells = <2>;
30
31	aliases {
32		mmc1 = &sdhc_1;
33		mmc2 = &sdhc_2;
34		i2c0 = &i2c0;
35		i2c1 = &i2c1;
36		i2c2 = &i2c2;
37		i2c3 = &i2c3;
38		i2c4 = &i2c4;
39		i2c5 = &i2c5;
40		i2c6 = &i2c6;
41		i2c7 = &i2c7;
42		i2c8 = &i2c8;
43		i2c9 = &i2c9;
44		i2c10 = &i2c10;
45		i2c11 = &i2c11;
46		spi0 = &spi0;
47		spi1 = &spi1;
48		spi3 = &spi3;
49		spi5 = &spi5;
50		spi6 = &spi6;
51		spi8 = &spi8;
52		spi10 = &spi10;
53		spi11 = &spi11;
54	};
55
56	chosen { };
57
58	clocks {
59		xo_board: xo-board {
60			compatible = "fixed-clock";
61			clock-frequency = <38400000>;
62			#clock-cells = <0>;
63		};
64
65		sleep_clk: sleep-clk {
66			compatible = "fixed-clock";
67			clock-frequency = <32764>;
68			#clock-cells = <0>;
69		};
70	};
71
72	cpus {
73		#address-cells = <2>;
74		#size-cells = <0>;
75
76		CPU0: cpu@0 {
77			device_type = "cpu";
78			compatible = "qcom,kryo468";
79			reg = <0x0 0x0>;
80			clocks = <&cpufreq_hw 0>;
81			enable-method = "psci";
82			power-domains = <&CPU_PD0>;
83			power-domain-names = "psci";
84			capacity-dmips-mhz = <415>;
85			dynamic-power-coefficient = <137>;
86			operating-points-v2 = <&cpu0_opp_table>;
87			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
88					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
89			next-level-cache = <&L2_0>;
90			#cooling-cells = <2>;
91			qcom,freq-domain = <&cpufreq_hw 0>;
92			L2_0: l2-cache {
93				compatible = "cache";
94				cache-level = <2>;
95				cache-unified;
96				next-level-cache = <&L3_0>;
97				L3_0: l3-cache {
98					compatible = "cache";
99					cache-level = <3>;
100					cache-unified;
101				};
102			};
103		};
104
105		CPU1: cpu@100 {
106			device_type = "cpu";
107			compatible = "qcom,kryo468";
108			reg = <0x0 0x100>;
109			clocks = <&cpufreq_hw 0>;
110			enable-method = "psci";
111			power-domains = <&CPU_PD1>;
112			power-domain-names = "psci";
113			capacity-dmips-mhz = <415>;
114			dynamic-power-coefficient = <137>;
115			next-level-cache = <&L2_100>;
116			operating-points-v2 = <&cpu0_opp_table>;
117			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
118					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
119			#cooling-cells = <2>;
120			qcom,freq-domain = <&cpufreq_hw 0>;
121			L2_100: l2-cache {
122				compatible = "cache";
123				cache-level = <2>;
124				cache-unified;
125				next-level-cache = <&L3_0>;
126			};
127		};
128
129		CPU2: cpu@200 {
130			device_type = "cpu";
131			compatible = "qcom,kryo468";
132			reg = <0x0 0x200>;
133			clocks = <&cpufreq_hw 0>;
134			enable-method = "psci";
135			power-domains = <&CPU_PD2>;
136			power-domain-names = "psci";
137			capacity-dmips-mhz = <415>;
138			dynamic-power-coefficient = <137>;
139			next-level-cache = <&L2_200>;
140			operating-points-v2 = <&cpu0_opp_table>;
141			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
142					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
143			#cooling-cells = <2>;
144			qcom,freq-domain = <&cpufreq_hw 0>;
145			L2_200: l2-cache {
146				compatible = "cache";
147				cache-level = <2>;
148				cache-unified;
149				next-level-cache = <&L3_0>;
150			};
151		};
152
153		CPU3: cpu@300 {
154			device_type = "cpu";
155			compatible = "qcom,kryo468";
156			reg = <0x0 0x300>;
157			clocks = <&cpufreq_hw 0>;
158			enable-method = "psci";
159			power-domains = <&CPU_PD3>;
160			power-domain-names = "psci";
161			capacity-dmips-mhz = <415>;
162			dynamic-power-coefficient = <137>;
163			next-level-cache = <&L2_300>;
164			operating-points-v2 = <&cpu0_opp_table>;
165			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
166					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
167			#cooling-cells = <2>;
168			qcom,freq-domain = <&cpufreq_hw 0>;
169			L2_300: l2-cache {
170				compatible = "cache";
171				cache-level = <2>;
172				cache-unified;
173				next-level-cache = <&L3_0>;
174			};
175		};
176
177		CPU4: cpu@400 {
178			device_type = "cpu";
179			compatible = "qcom,kryo468";
180			reg = <0x0 0x400>;
181			clocks = <&cpufreq_hw 0>;
182			enable-method = "psci";
183			power-domains = <&CPU_PD4>;
184			power-domain-names = "psci";
185			capacity-dmips-mhz = <415>;
186			dynamic-power-coefficient = <137>;
187			next-level-cache = <&L2_400>;
188			operating-points-v2 = <&cpu0_opp_table>;
189			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
190					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
191			#cooling-cells = <2>;
192			qcom,freq-domain = <&cpufreq_hw 0>;
193			L2_400: l2-cache {
194				compatible = "cache";
195				cache-level = <2>;
196				cache-unified;
197				next-level-cache = <&L3_0>;
198			};
199		};
200
201		CPU5: cpu@500 {
202			device_type = "cpu";
203			compatible = "qcom,kryo468";
204			reg = <0x0 0x500>;
205			clocks = <&cpufreq_hw 0>;
206			enable-method = "psci";
207			power-domains = <&CPU_PD5>;
208			power-domain-names = "psci";
209			capacity-dmips-mhz = <415>;
210			dynamic-power-coefficient = <137>;
211			next-level-cache = <&L2_500>;
212			operating-points-v2 = <&cpu0_opp_table>;
213			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
214					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
215			#cooling-cells = <2>;
216			qcom,freq-domain = <&cpufreq_hw 0>;
217			L2_500: l2-cache {
218				compatible = "cache";
219				cache-level = <2>;
220				cache-unified;
221				next-level-cache = <&L3_0>;
222			};
223		};
224
225		CPU6: cpu@600 {
226			device_type = "cpu";
227			compatible = "qcom,kryo468";
228			reg = <0x0 0x600>;
229			clocks = <&cpufreq_hw 1>;
230			enable-method = "psci";
231			power-domains = <&CPU_PD6>;
232			power-domain-names = "psci";
233			capacity-dmips-mhz = <1024>;
234			dynamic-power-coefficient = <480>;
235			next-level-cache = <&L2_600>;
236			operating-points-v2 = <&cpu6_opp_table>;
237			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
238					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
239			#cooling-cells = <2>;
240			qcom,freq-domain = <&cpufreq_hw 1>;
241			L2_600: l2-cache {
242				compatible = "cache";
243				cache-level = <2>;
244				cache-unified;
245				next-level-cache = <&L3_0>;
246			};
247		};
248
249		CPU7: cpu@700 {
250			device_type = "cpu";
251			compatible = "qcom,kryo468";
252			reg = <0x0 0x700>;
253			clocks = <&cpufreq_hw 1>;
254			enable-method = "psci";
255			power-domains = <&CPU_PD7>;
256			power-domain-names = "psci";
257			capacity-dmips-mhz = <1024>;
258			dynamic-power-coefficient = <480>;
259			next-level-cache = <&L2_700>;
260			operating-points-v2 = <&cpu6_opp_table>;
261			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
262					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
263			#cooling-cells = <2>;
264			qcom,freq-domain = <&cpufreq_hw 1>;
265			L2_700: l2-cache {
266				compatible = "cache";
267				cache-level = <2>;
268				cache-unified;
269				next-level-cache = <&L3_0>;
270			};
271		};
272
273		cpu-map {
274			cluster0 {
275				core0 {
276					cpu = <&CPU0>;
277				};
278
279				core1 {
280					cpu = <&CPU1>;
281				};
282
283				core2 {
284					cpu = <&CPU2>;
285				};
286
287				core3 {
288					cpu = <&CPU3>;
289				};
290
291				core4 {
292					cpu = <&CPU4>;
293				};
294
295				core5 {
296					cpu = <&CPU5>;
297				};
298
299				core6 {
300					cpu = <&CPU6>;
301				};
302
303				core7 {
304					cpu = <&CPU7>;
305				};
306			};
307		};
308
309		idle_states: idle-states {
310			entry-method = "psci";
311
312			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
313				compatible = "arm,idle-state";
314				idle-state-name = "little-power-down";
315				arm,psci-suspend-param = <0x40000003>;
316				entry-latency-us = <549>;
317				exit-latency-us = <901>;
318				min-residency-us = <1774>;
319				local-timer-stop;
320			};
321
322			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
323				compatible = "arm,idle-state";
324				idle-state-name = "little-rail-power-down";
325				arm,psci-suspend-param = <0x40000004>;
326				entry-latency-us = <702>;
327				exit-latency-us = <915>;
328				min-residency-us = <4001>;
329				local-timer-stop;
330			};
331
332			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
333				compatible = "arm,idle-state";
334				idle-state-name = "big-power-down";
335				arm,psci-suspend-param = <0x40000003>;
336				entry-latency-us = <523>;
337				exit-latency-us = <1244>;
338				min-residency-us = <2207>;
339				local-timer-stop;
340			};
341
342			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
343				compatible = "arm,idle-state";
344				idle-state-name = "big-rail-power-down";
345				arm,psci-suspend-param = <0x40000004>;
346				entry-latency-us = <526>;
347				exit-latency-us = <1854>;
348				min-residency-us = <5555>;
349				local-timer-stop;
350			};
351		};
352
353		domain_idle_states: domain-idle-states {
354			CLUSTER_SLEEP_PC: cluster-sleep-0 {
355				compatible = "domain-idle-state";
356				idle-state-name = "cluster-l3-power-collapse";
357				arm,psci-suspend-param = <0x41000044>;
358				entry-latency-us = <2752>;
359				exit-latency-us = <3048>;
360				min-residency-us = <6118>;
361			};
362
363			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
364				compatible = "domain-idle-state";
365				idle-state-name = "cluster-cx-retention";
366				arm,psci-suspend-param = <0x41001244>;
367				entry-latency-us = <3638>;
368				exit-latency-us = <4562>;
369				min-residency-us = <8467>;
370			};
371
372			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
373				compatible = "domain-idle-state";
374				idle-state-name = "cluster-power-down";
375				arm,psci-suspend-param = <0x4100b244>;
376				entry-latency-us = <3263>;
377				exit-latency-us = <6562>;
378				min-residency-us = <9826>;
379			};
380		};
381	};
382
383	firmware {
384		scm: scm {
385			compatible = "qcom,scm-sc7180", "qcom,scm";
386		};
387	};
388
389	memory@80000000 {
390		device_type = "memory";
391		/* We expect the bootloader to fill in the size */
392		reg = <0 0x80000000 0 0>;
393	};
394
395	cpu0_opp_table: opp-table-cpu0 {
396		compatible = "operating-points-v2";
397		opp-shared;
398
399		cpu0_opp1: opp-300000000 {
400			opp-hz = /bits/ 64 <300000000>;
401			opp-peak-kBps = <1200000 4800000>;
402		};
403
404		cpu0_opp2: opp-576000000 {
405			opp-hz = /bits/ 64 <576000000>;
406			opp-peak-kBps = <1200000 4800000>;
407		};
408
409		cpu0_opp3: opp-768000000 {
410			opp-hz = /bits/ 64 <768000000>;
411			opp-peak-kBps = <1200000 4800000>;
412		};
413
414		cpu0_opp4: opp-1017600000 {
415			opp-hz = /bits/ 64 <1017600000>;
416			opp-peak-kBps = <1804000 8908800>;
417		};
418
419		cpu0_opp5: opp-1248000000 {
420			opp-hz = /bits/ 64 <1248000000>;
421			opp-peak-kBps = <2188000 12902400>;
422		};
423
424		cpu0_opp6: opp-1324800000 {
425			opp-hz = /bits/ 64 <1324800000>;
426			opp-peak-kBps = <2188000 12902400>;
427		};
428
429		cpu0_opp7: opp-1516800000 {
430			opp-hz = /bits/ 64 <1516800000>;
431			opp-peak-kBps = <3072000 15052800>;
432		};
433
434		cpu0_opp8: opp-1612800000 {
435			opp-hz = /bits/ 64 <1612800000>;
436			opp-peak-kBps = <3072000 15052800>;
437		};
438
439		cpu0_opp9: opp-1708800000 {
440			opp-hz = /bits/ 64 <1708800000>;
441			opp-peak-kBps = <3072000 15052800>;
442		};
443
444		cpu0_opp10: opp-1804800000 {
445			opp-hz = /bits/ 64 <1804800000>;
446			opp-peak-kBps = <4068000 22425600>;
447		};
448	};
449
450	cpu6_opp_table: opp-table-cpu6 {
451		compatible = "operating-points-v2";
452		opp-shared;
453
454		cpu6_opp1: opp-300000000 {
455			opp-hz = /bits/ 64 <300000000>;
456			opp-peak-kBps = <2188000 8908800>;
457		};
458
459		cpu6_opp2: opp-652800000 {
460			opp-hz = /bits/ 64 <652800000>;
461			opp-peak-kBps = <2188000 8908800>;
462		};
463
464		cpu6_opp3: opp-825600000 {
465			opp-hz = /bits/ 64 <825600000>;
466			opp-peak-kBps = <2188000 8908800>;
467		};
468
469		cpu6_opp4: opp-979200000 {
470			opp-hz = /bits/ 64 <979200000>;
471			opp-peak-kBps = <2188000 8908800>;
472		};
473
474		cpu6_opp5: opp-1113600000 {
475			opp-hz = /bits/ 64 <1113600000>;
476			opp-peak-kBps = <2188000 8908800>;
477		};
478
479		cpu6_opp6: opp-1267200000 {
480			opp-hz = /bits/ 64 <1267200000>;
481			opp-peak-kBps = <4068000 12902400>;
482		};
483
484		cpu6_opp7: opp-1555200000 {
485			opp-hz = /bits/ 64 <1555200000>;
486			opp-peak-kBps = <4068000 15052800>;
487		};
488
489		cpu6_opp8: opp-1708800000 {
490			opp-hz = /bits/ 64 <1708800000>;
491			opp-peak-kBps = <6220000 19353600>;
492		};
493
494		cpu6_opp9: opp-1843200000 {
495			opp-hz = /bits/ 64 <1843200000>;
496			opp-peak-kBps = <6220000 19353600>;
497		};
498
499		cpu6_opp10: opp-1900800000 {
500			opp-hz = /bits/ 64 <1900800000>;
501			opp-peak-kBps = <6220000 22425600>;
502		};
503
504		cpu6_opp11: opp-1996800000 {
505			opp-hz = /bits/ 64 <1996800000>;
506			opp-peak-kBps = <6220000 22425600>;
507		};
508
509		cpu6_opp12: opp-2112000000 {
510			opp-hz = /bits/ 64 <2112000000>;
511			opp-peak-kBps = <6220000 22425600>;
512		};
513
514		cpu6_opp13: opp-2208000000 {
515			opp-hz = /bits/ 64 <2208000000>;
516			opp-peak-kBps = <7216000 22425600>;
517		};
518
519		cpu6_opp14: opp-2323200000 {
520			opp-hz = /bits/ 64 <2323200000>;
521			opp-peak-kBps = <7216000 22425600>;
522		};
523
524		cpu6_opp15: opp-2400000000 {
525			opp-hz = /bits/ 64 <2400000000>;
526			opp-peak-kBps = <8532000 23347200>;
527		};
528
529		cpu6_opp16: opp-2553600000 {
530			opp-hz = /bits/ 64 <2553600000>;
531			opp-peak-kBps = <8532000 23347200>;
532		};
533	};
534
535	qspi_opp_table: opp-table-qspi {
536		compatible = "operating-points-v2";
537
538		opp-75000000 {
539			opp-hz = /bits/ 64 <75000000>;
540			required-opps = <&rpmhpd_opp_low_svs>;
541		};
542
543		opp-150000000 {
544			opp-hz = /bits/ 64 <150000000>;
545			required-opps = <&rpmhpd_opp_svs>;
546		};
547
548		opp-300000000 {
549			opp-hz = /bits/ 64 <300000000>;
550			required-opps = <&rpmhpd_opp_nom>;
551		};
552	};
553
554	qup_opp_table: opp-table-qup {
555		compatible = "operating-points-v2";
556
557		opp-75000000 {
558			opp-hz = /bits/ 64 <75000000>;
559			required-opps = <&rpmhpd_opp_low_svs>;
560		};
561
562		opp-100000000 {
563			opp-hz = /bits/ 64 <100000000>;
564			required-opps = <&rpmhpd_opp_svs>;
565		};
566
567		opp-128000000 {
568			opp-hz = /bits/ 64 <128000000>;
569			required-opps = <&rpmhpd_opp_nom>;
570		};
571	};
572
573	pmu {
574		compatible = "arm,armv8-pmuv3";
575		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
576	};
577
578	psci {
579		compatible = "arm,psci-1.0";
580		method = "smc";
581
582		CPU_PD0: cpu0 {
583			#power-domain-cells = <0>;
584			power-domains = <&CLUSTER_PD>;
585			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
586		};
587
588		CPU_PD1: cpu1 {
589			#power-domain-cells = <0>;
590			power-domains = <&CLUSTER_PD>;
591			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
592		};
593
594		CPU_PD2: cpu2 {
595			#power-domain-cells = <0>;
596			power-domains = <&CLUSTER_PD>;
597			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
598		};
599
600		CPU_PD3: cpu3 {
601			#power-domain-cells = <0>;
602			power-domains = <&CLUSTER_PD>;
603			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
604		};
605
606		CPU_PD4: cpu4 {
607			#power-domain-cells = <0>;
608			power-domains = <&CLUSTER_PD>;
609			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
610		};
611
612		CPU_PD5: cpu5 {
613			#power-domain-cells = <0>;
614			power-domains = <&CLUSTER_PD>;
615			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
616		};
617
618		CPU_PD6: cpu6 {
619			#power-domain-cells = <0>;
620			power-domains = <&CLUSTER_PD>;
621			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
622		};
623
624		CPU_PD7: cpu7 {
625			#power-domain-cells = <0>;
626			power-domains = <&CLUSTER_PD>;
627			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
628		};
629
630		CLUSTER_PD: cpu-cluster0 {
631			#power-domain-cells = <0>;
632			domain-idle-states = <&CLUSTER_SLEEP_PC
633					      &CLUSTER_SLEEP_CX_RET
634					      &CLUSTER_AOSS_SLEEP>;
635		};
636	};
637
638	reserved_memory: reserved-memory {
639		#address-cells = <2>;
640		#size-cells = <2>;
641		ranges;
642
643		hyp_mem: memory@80000000 {
644			reg = <0x0 0x80000000 0x0 0x600000>;
645			no-map;
646		};
647
648		xbl_mem: memory@80600000 {
649			reg = <0x0 0x80600000 0x0 0x200000>;
650			no-map;
651		};
652
653		aop_mem: memory@80800000 {
654			reg = <0x0 0x80800000 0x0 0x20000>;
655			no-map;
656		};
657
658		aop_cmd_db_mem: memory@80820000 {
659			reg = <0x0 0x80820000 0x0 0x20000>;
660			compatible = "qcom,cmd-db";
661			no-map;
662		};
663
664		sec_apps_mem: memory@808ff000 {
665			reg = <0x0 0x808ff000 0x0 0x1000>;
666			no-map;
667		};
668
669		smem_mem: memory@80900000 {
670			reg = <0x0 0x80900000 0x0 0x200000>;
671			no-map;
672		};
673
674		tz_mem: memory@80b00000 {
675			reg = <0x0 0x80b00000 0x0 0x3900000>;
676			no-map;
677		};
678
679		ipa_fw_mem: memory@8b700000 {
680			reg = <0 0x8b700000 0 0x10000>;
681			no-map;
682		};
683
684		rmtfs_mem: memory@94600000 {
685			compatible = "qcom,rmtfs-mem";
686			reg = <0x0 0x94600000 0x0 0x200000>;
687			no-map;
688
689			qcom,client-id = <1>;
690			qcom,vmid = <15>;
691		};
692	};
693
694	smem {
695		compatible = "qcom,smem";
696		memory-region = <&smem_mem>;
697		hwlocks = <&tcsr_mutex 3>;
698	};
699
700	smp2p-cdsp {
701		compatible = "qcom,smp2p";
702		qcom,smem = <94>, <432>;
703
704		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
705
706		mboxes = <&apss_shared 6>;
707
708		qcom,local-pid = <0>;
709		qcom,remote-pid = <5>;
710
711		cdsp_smp2p_out: master-kernel {
712			qcom,entry-name = "master-kernel";
713			#qcom,smem-state-cells = <1>;
714		};
715
716		cdsp_smp2p_in: slave-kernel {
717			qcom,entry-name = "slave-kernel";
718
719			interrupt-controller;
720			#interrupt-cells = <2>;
721		};
722	};
723
724	smp2p-lpass {
725		compatible = "qcom,smp2p";
726		qcom,smem = <443>, <429>;
727
728		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
729
730		mboxes = <&apss_shared 10>;
731
732		qcom,local-pid = <0>;
733		qcom,remote-pid = <2>;
734
735		adsp_smp2p_out: master-kernel {
736			qcom,entry-name = "master-kernel";
737			#qcom,smem-state-cells = <1>;
738		};
739
740		adsp_smp2p_in: slave-kernel {
741			qcom,entry-name = "slave-kernel";
742
743			interrupt-controller;
744			#interrupt-cells = <2>;
745		};
746	};
747
748	smp2p-mpss {
749		compatible = "qcom,smp2p";
750		qcom,smem = <435>, <428>;
751		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
752		mboxes = <&apss_shared 14>;
753		qcom,local-pid = <0>;
754		qcom,remote-pid = <1>;
755
756		modem_smp2p_out: master-kernel {
757			qcom,entry-name = "master-kernel";
758			#qcom,smem-state-cells = <1>;
759		};
760
761		modem_smp2p_in: slave-kernel {
762			qcom,entry-name = "slave-kernel";
763			interrupt-controller;
764			#interrupt-cells = <2>;
765		};
766
767		ipa_smp2p_out: ipa-ap-to-modem {
768			qcom,entry-name = "ipa";
769			#qcom,smem-state-cells = <1>;
770		};
771
772		ipa_smp2p_in: ipa-modem-to-ap {
773			qcom,entry-name = "ipa";
774			interrupt-controller;
775			#interrupt-cells = <2>;
776		};
777	};
778
779	soc: soc@0 {
780		#address-cells = <2>;
781		#size-cells = <2>;
782		ranges = <0 0 0 0 0x10 0>;
783		dma-ranges = <0 0 0 0 0x10 0>;
784		compatible = "simple-bus";
785
786		gcc: clock-controller@100000 {
787			compatible = "qcom,gcc-sc7180";
788			reg = <0 0x00100000 0 0x1f0000>;
789			clocks = <&rpmhcc RPMH_CXO_CLK>,
790				 <&rpmhcc RPMH_CXO_CLK_A>,
791				 <&sleep_clk>;
792			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
793			#clock-cells = <1>;
794			#reset-cells = <1>;
795			#power-domain-cells = <1>;
796			power-domains = <&rpmhpd SC7180_CX>;
797		};
798
799		qfprom: efuse@784000 {
800			compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
801			reg = <0 0x00784000 0 0x7a0>,
802			      <0 0x00780000 0 0x7a0>,
803			      <0 0x00782000 0 0x100>,
804			      <0 0x00786000 0 0x1fff>;
805
806			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
807			clock-names = "core";
808			#address-cells = <1>;
809			#size-cells = <1>;
810
811			qusb2p_hstx_trim: hstx-trim-primary@25b {
812				reg = <0x25b 0x1>;
813				bits = <1 3>;
814			};
815
816			gpu_speed_bin: gpu_speed_bin@1d2 {
817				reg = <0x1d2 0x2>;
818				bits = <5 8>;
819			};
820		};
821
822		sdhc_1: mmc@7c4000 {
823			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
824			reg = <0 0x007c4000 0 0x1000>,
825				<0 0x007c5000 0 0x1000>;
826			reg-names = "hc", "cqhci";
827
828			iommus = <&apps_smmu 0x60 0x0>;
829			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
830					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
831			interrupt-names = "hc_irq", "pwr_irq";
832
833			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
834				 <&gcc GCC_SDCC1_APPS_CLK>,
835				 <&rpmhcc RPMH_CXO_CLK>;
836			clock-names = "iface", "core", "xo";
837			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
838					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
839			interconnect-names = "sdhc-ddr","cpu-sdhc";
840			power-domains = <&rpmhpd SC7180_CX>;
841			operating-points-v2 = <&sdhc1_opp_table>;
842
843			bus-width = <8>;
844			non-removable;
845			supports-cqe;
846
847			mmc-ddr-1_8v;
848			mmc-hs200-1_8v;
849			mmc-hs400-1_8v;
850			mmc-hs400-enhanced-strobe;
851
852			status = "disabled";
853
854			sdhc1_opp_table: opp-table {
855				compatible = "operating-points-v2";
856
857				opp-100000000 {
858					opp-hz = /bits/ 64 <100000000>;
859					required-opps = <&rpmhpd_opp_low_svs>;
860					opp-peak-kBps = <1800000 600000>;
861					opp-avg-kBps = <100000 0>;
862				};
863
864				opp-384000000 {
865					opp-hz = /bits/ 64 <384000000>;
866					required-opps = <&rpmhpd_opp_nom>;
867					opp-peak-kBps = <5400000 1600000>;
868					opp-avg-kBps = <390000 0>;
869				};
870			};
871		};
872
873		qupv3_id_0: geniqup@8c0000 {
874			compatible = "qcom,geni-se-qup";
875			reg = <0 0x008c0000 0 0x6000>;
876			clock-names = "m-ahb", "s-ahb";
877			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
878				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
879			#address-cells = <2>;
880			#size-cells = <2>;
881			ranges;
882			iommus = <&apps_smmu 0x43 0x0>;
883			status = "disabled";
884
885			i2c0: i2c@880000 {
886				compatible = "qcom,geni-i2c";
887				reg = <0 0x00880000 0 0x4000>;
888				clock-names = "se";
889				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
890				pinctrl-names = "default";
891				pinctrl-0 = <&qup_i2c0_default>;
892				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
893				#address-cells = <1>;
894				#size-cells = <0>;
895				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
896						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
897						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
898				interconnect-names = "qup-core", "qup-config",
899							"qup-memory";
900				power-domains = <&rpmhpd SC7180_CX>;
901				required-opps = <&rpmhpd_opp_low_svs>;
902				status = "disabled";
903			};
904
905			spi0: spi@880000 {
906				compatible = "qcom,geni-spi";
907				reg = <0 0x00880000 0 0x4000>;
908				clock-names = "se";
909				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
910				pinctrl-names = "default";
911				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
912				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
913				#address-cells = <1>;
914				#size-cells = <0>;
915				power-domains = <&rpmhpd SC7180_CX>;
916				operating-points-v2 = <&qup_opp_table>;
917				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
918						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
919				interconnect-names = "qup-core", "qup-config";
920				status = "disabled";
921			};
922
923			uart0: serial@880000 {
924				compatible = "qcom,geni-uart";
925				reg = <0 0x00880000 0 0x4000>;
926				clock-names = "se";
927				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
928				pinctrl-names = "default";
929				pinctrl-0 = <&qup_uart0_default>;
930				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
931				power-domains = <&rpmhpd SC7180_CX>;
932				operating-points-v2 = <&qup_opp_table>;
933				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
934						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
935				interconnect-names = "qup-core", "qup-config";
936				status = "disabled";
937			};
938
939			i2c1: i2c@884000 {
940				compatible = "qcom,geni-i2c";
941				reg = <0 0x00884000 0 0x4000>;
942				clock-names = "se";
943				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
944				pinctrl-names = "default";
945				pinctrl-0 = <&qup_i2c1_default>;
946				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
947				#address-cells = <1>;
948				#size-cells = <0>;
949				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
950						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
951						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
952				interconnect-names = "qup-core", "qup-config",
953							"qup-memory";
954				power-domains = <&rpmhpd SC7180_CX>;
955				required-opps = <&rpmhpd_opp_low_svs>;
956				status = "disabled";
957			};
958
959			spi1: spi@884000 {
960				compatible = "qcom,geni-spi";
961				reg = <0 0x00884000 0 0x4000>;
962				clock-names = "se";
963				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
964				pinctrl-names = "default";
965				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
966				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
967				#address-cells = <1>;
968				#size-cells = <0>;
969				power-domains = <&rpmhpd SC7180_CX>;
970				operating-points-v2 = <&qup_opp_table>;
971				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
972						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
973				interconnect-names = "qup-core", "qup-config";
974				status = "disabled";
975			};
976
977			uart1: serial@884000 {
978				compatible = "qcom,geni-uart";
979				reg = <0 0x00884000 0 0x4000>;
980				clock-names = "se";
981				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
982				pinctrl-names = "default";
983				pinctrl-0 = <&qup_uart1_default>;
984				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
985				power-domains = <&rpmhpd SC7180_CX>;
986				operating-points-v2 = <&qup_opp_table>;
987				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
988						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
989				interconnect-names = "qup-core", "qup-config";
990				status = "disabled";
991			};
992
993			i2c2: i2c@888000 {
994				compatible = "qcom,geni-i2c";
995				reg = <0 0x00888000 0 0x4000>;
996				clock-names = "se";
997				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
998				pinctrl-names = "default";
999				pinctrl-0 = <&qup_i2c2_default>;
1000				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1001				#address-cells = <1>;
1002				#size-cells = <0>;
1003				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1004						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1005						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1006				interconnect-names = "qup-core", "qup-config",
1007							"qup-memory";
1008				power-domains = <&rpmhpd SC7180_CX>;
1009				required-opps = <&rpmhpd_opp_low_svs>;
1010				status = "disabled";
1011			};
1012
1013			uart2: serial@888000 {
1014				compatible = "qcom,geni-uart";
1015				reg = <0 0x00888000 0 0x4000>;
1016				clock-names = "se";
1017				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1018				pinctrl-names = "default";
1019				pinctrl-0 = <&qup_uart2_default>;
1020				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1021				power-domains = <&rpmhpd SC7180_CX>;
1022				operating-points-v2 = <&qup_opp_table>;
1023				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1024						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1025				interconnect-names = "qup-core", "qup-config";
1026				status = "disabled";
1027			};
1028
1029			i2c3: i2c@88c000 {
1030				compatible = "qcom,geni-i2c";
1031				reg = <0 0x0088c000 0 0x4000>;
1032				clock-names = "se";
1033				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1034				pinctrl-names = "default";
1035				pinctrl-0 = <&qup_i2c3_default>;
1036				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1037				#address-cells = <1>;
1038				#size-cells = <0>;
1039				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1040						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1041						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1042				interconnect-names = "qup-core", "qup-config",
1043							"qup-memory";
1044				power-domains = <&rpmhpd SC7180_CX>;
1045				required-opps = <&rpmhpd_opp_low_svs>;
1046				status = "disabled";
1047			};
1048
1049			spi3: spi@88c000 {
1050				compatible = "qcom,geni-spi";
1051				reg = <0 0x0088c000 0 0x4000>;
1052				clock-names = "se";
1053				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1054				pinctrl-names = "default";
1055				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
1056				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1057				#address-cells = <1>;
1058				#size-cells = <0>;
1059				power-domains = <&rpmhpd SC7180_CX>;
1060				operating-points-v2 = <&qup_opp_table>;
1061				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1062						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1063				interconnect-names = "qup-core", "qup-config";
1064				status = "disabled";
1065			};
1066
1067			uart3: serial@88c000 {
1068				compatible = "qcom,geni-uart";
1069				reg = <0 0x0088c000 0 0x4000>;
1070				clock-names = "se";
1071				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1072				pinctrl-names = "default";
1073				pinctrl-0 = <&qup_uart3_default>;
1074				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1075				power-domains = <&rpmhpd SC7180_CX>;
1076				operating-points-v2 = <&qup_opp_table>;
1077				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1078						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1079				interconnect-names = "qup-core", "qup-config";
1080				status = "disabled";
1081			};
1082
1083			i2c4: i2c@890000 {
1084				compatible = "qcom,geni-i2c";
1085				reg = <0 0x00890000 0 0x4000>;
1086				clock-names = "se";
1087				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1088				pinctrl-names = "default";
1089				pinctrl-0 = <&qup_i2c4_default>;
1090				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1091				#address-cells = <1>;
1092				#size-cells = <0>;
1093				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1094						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1095						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1096				interconnect-names = "qup-core", "qup-config",
1097							"qup-memory";
1098				power-domains = <&rpmhpd SC7180_CX>;
1099				required-opps = <&rpmhpd_opp_low_svs>;
1100				status = "disabled";
1101			};
1102
1103			uart4: serial@890000 {
1104				compatible = "qcom,geni-uart";
1105				reg = <0 0x00890000 0 0x4000>;
1106				clock-names = "se";
1107				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1108				pinctrl-names = "default";
1109				pinctrl-0 = <&qup_uart4_default>;
1110				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1111				power-domains = <&rpmhpd SC7180_CX>;
1112				operating-points-v2 = <&qup_opp_table>;
1113				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1114						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1115				interconnect-names = "qup-core", "qup-config";
1116				status = "disabled";
1117			};
1118
1119			i2c5: i2c@894000 {
1120				compatible = "qcom,geni-i2c";
1121				reg = <0 0x00894000 0 0x4000>;
1122				clock-names = "se";
1123				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1124				pinctrl-names = "default";
1125				pinctrl-0 = <&qup_i2c5_default>;
1126				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1127				#address-cells = <1>;
1128				#size-cells = <0>;
1129				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1130						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
1131						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1132				interconnect-names = "qup-core", "qup-config",
1133							"qup-memory";
1134				power-domains = <&rpmhpd SC7180_CX>;
1135				required-opps = <&rpmhpd_opp_low_svs>;
1136				status = "disabled";
1137			};
1138
1139			spi5: spi@894000 {
1140				compatible = "qcom,geni-spi";
1141				reg = <0 0x00894000 0 0x4000>;
1142				clock-names = "se";
1143				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1144				pinctrl-names = "default";
1145				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
1146				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1147				#address-cells = <1>;
1148				#size-cells = <0>;
1149				power-domains = <&rpmhpd SC7180_CX>;
1150				operating-points-v2 = <&qup_opp_table>;
1151				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1152						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1153				interconnect-names = "qup-core", "qup-config";
1154				status = "disabled";
1155			};
1156
1157			uart5: serial@894000 {
1158				compatible = "qcom,geni-uart";
1159				reg = <0 0x00894000 0 0x4000>;
1160				clock-names = "se";
1161				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1162				pinctrl-names = "default";
1163				pinctrl-0 = <&qup_uart5_default>;
1164				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1165				power-domains = <&rpmhpd SC7180_CX>;
1166				operating-points-v2 = <&qup_opp_table>;
1167				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1168						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
1169				interconnect-names = "qup-core", "qup-config";
1170				status = "disabled";
1171			};
1172		};
1173
1174		qupv3_id_1: geniqup@ac0000 {
1175			compatible = "qcom,geni-se-qup";
1176			reg = <0 0x00ac0000 0 0x6000>;
1177			clock-names = "m-ahb", "s-ahb";
1178			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1179				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1180			#address-cells = <2>;
1181			#size-cells = <2>;
1182			ranges;
1183			iommus = <&apps_smmu 0x4c3 0x0>;
1184			status = "disabled";
1185
1186			i2c6: i2c@a80000 {
1187				compatible = "qcom,geni-i2c";
1188				reg = <0 0x00a80000 0 0x4000>;
1189				clock-names = "se";
1190				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1191				pinctrl-names = "default";
1192				pinctrl-0 = <&qup_i2c6_default>;
1193				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1194				#address-cells = <1>;
1195				#size-cells = <0>;
1196				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1197						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1198						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1199				interconnect-names = "qup-core", "qup-config",
1200							"qup-memory";
1201				power-domains = <&rpmhpd SC7180_CX>;
1202				required-opps = <&rpmhpd_opp_low_svs>;
1203				status = "disabled";
1204			};
1205
1206			spi6: spi@a80000 {
1207				compatible = "qcom,geni-spi";
1208				reg = <0 0x00a80000 0 0x4000>;
1209				clock-names = "se";
1210				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1211				pinctrl-names = "default";
1212				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
1213				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1214				#address-cells = <1>;
1215				#size-cells = <0>;
1216				power-domains = <&rpmhpd SC7180_CX>;
1217				operating-points-v2 = <&qup_opp_table>;
1218				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1219						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1220				interconnect-names = "qup-core", "qup-config";
1221				status = "disabled";
1222			};
1223
1224			uart6: serial@a80000 {
1225				compatible = "qcom,geni-uart";
1226				reg = <0 0x00a80000 0 0x4000>;
1227				clock-names = "se";
1228				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1229				pinctrl-names = "default";
1230				pinctrl-0 = <&qup_uart6_default>;
1231				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1232				power-domains = <&rpmhpd SC7180_CX>;
1233				operating-points-v2 = <&qup_opp_table>;
1234				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1235						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1236				interconnect-names = "qup-core", "qup-config";
1237				status = "disabled";
1238			};
1239
1240			i2c7: i2c@a84000 {
1241				compatible = "qcom,geni-i2c";
1242				reg = <0 0x00a84000 0 0x4000>;
1243				clock-names = "se";
1244				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1245				pinctrl-names = "default";
1246				pinctrl-0 = <&qup_i2c7_default>;
1247				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1248				#address-cells = <1>;
1249				#size-cells = <0>;
1250				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1251						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1252						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1253				interconnect-names = "qup-core", "qup-config",
1254							"qup-memory";
1255				power-domains = <&rpmhpd SC7180_CX>;
1256				required-opps = <&rpmhpd_opp_low_svs>;
1257				status = "disabled";
1258			};
1259
1260			uart7: serial@a84000 {
1261				compatible = "qcom,geni-uart";
1262				reg = <0 0x00a84000 0 0x4000>;
1263				clock-names = "se";
1264				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1265				pinctrl-names = "default";
1266				pinctrl-0 = <&qup_uart7_default>;
1267				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1268				power-domains = <&rpmhpd SC7180_CX>;
1269				operating-points-v2 = <&qup_opp_table>;
1270				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1271						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1272				interconnect-names = "qup-core", "qup-config";
1273				status = "disabled";
1274			};
1275
1276			i2c8: i2c@a88000 {
1277				compatible = "qcom,geni-i2c";
1278				reg = <0 0x00a88000 0 0x4000>;
1279				clock-names = "se";
1280				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1281				pinctrl-names = "default";
1282				pinctrl-0 = <&qup_i2c8_default>;
1283				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1284				#address-cells = <1>;
1285				#size-cells = <0>;
1286				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1287						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1288						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1289				interconnect-names = "qup-core", "qup-config",
1290							"qup-memory";
1291				power-domains = <&rpmhpd SC7180_CX>;
1292				required-opps = <&rpmhpd_opp_low_svs>;
1293				status = "disabled";
1294			};
1295
1296			spi8: spi@a88000 {
1297				compatible = "qcom,geni-spi";
1298				reg = <0 0x00a88000 0 0x4000>;
1299				clock-names = "se";
1300				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1301				pinctrl-names = "default";
1302				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
1303				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1304				#address-cells = <1>;
1305				#size-cells = <0>;
1306				power-domains = <&rpmhpd SC7180_CX>;
1307				operating-points-v2 = <&qup_opp_table>;
1308				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1309						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1310				interconnect-names = "qup-core", "qup-config";
1311				status = "disabled";
1312			};
1313
1314			uart8: serial@a88000 {
1315				compatible = "qcom,geni-debug-uart";
1316				reg = <0 0x00a88000 0 0x4000>;
1317				clock-names = "se";
1318				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1319				pinctrl-names = "default";
1320				pinctrl-0 = <&qup_uart8_default>;
1321				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1322				power-domains = <&rpmhpd SC7180_CX>;
1323				operating-points-v2 = <&qup_opp_table>;
1324				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1325						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1326				interconnect-names = "qup-core", "qup-config";
1327				status = "disabled";
1328			};
1329
1330			i2c9: i2c@a8c000 {
1331				compatible = "qcom,geni-i2c";
1332				reg = <0 0x00a8c000 0 0x4000>;
1333				clock-names = "se";
1334				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1335				pinctrl-names = "default";
1336				pinctrl-0 = <&qup_i2c9_default>;
1337				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1338				#address-cells = <1>;
1339				#size-cells = <0>;
1340				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1341						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1342						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1343				interconnect-names = "qup-core", "qup-config",
1344							"qup-memory";
1345				power-domains = <&rpmhpd SC7180_CX>;
1346				required-opps = <&rpmhpd_opp_low_svs>;
1347				status = "disabled";
1348			};
1349
1350			uart9: serial@a8c000 {
1351				compatible = "qcom,geni-uart";
1352				reg = <0 0x00a8c000 0 0x4000>;
1353				clock-names = "se";
1354				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1355				pinctrl-names = "default";
1356				pinctrl-0 = <&qup_uart9_default>;
1357				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1358				power-domains = <&rpmhpd SC7180_CX>;
1359				operating-points-v2 = <&qup_opp_table>;
1360				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1361						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1362				interconnect-names = "qup-core", "qup-config";
1363				status = "disabled";
1364			};
1365
1366			i2c10: i2c@a90000 {
1367				compatible = "qcom,geni-i2c";
1368				reg = <0 0x00a90000 0 0x4000>;
1369				clock-names = "se";
1370				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1371				pinctrl-names = "default";
1372				pinctrl-0 = <&qup_i2c10_default>;
1373				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1374				#address-cells = <1>;
1375				#size-cells = <0>;
1376				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1377						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1378						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1379				interconnect-names = "qup-core", "qup-config",
1380							"qup-memory";
1381				power-domains = <&rpmhpd SC7180_CX>;
1382				required-opps = <&rpmhpd_opp_low_svs>;
1383				status = "disabled";
1384			};
1385
1386			spi10: spi@a90000 {
1387				compatible = "qcom,geni-spi";
1388				reg = <0 0x00a90000 0 0x4000>;
1389				clock-names = "se";
1390				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1391				pinctrl-names = "default";
1392				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
1393				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1394				#address-cells = <1>;
1395				#size-cells = <0>;
1396				power-domains = <&rpmhpd SC7180_CX>;
1397				operating-points-v2 = <&qup_opp_table>;
1398				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1399						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1400				interconnect-names = "qup-core", "qup-config";
1401				status = "disabled";
1402			};
1403
1404			uart10: serial@a90000 {
1405				compatible = "qcom,geni-uart";
1406				reg = <0 0x00a90000 0 0x4000>;
1407				clock-names = "se";
1408				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1409				pinctrl-names = "default";
1410				pinctrl-0 = <&qup_uart10_default>;
1411				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1412				power-domains = <&rpmhpd SC7180_CX>;
1413				operating-points-v2 = <&qup_opp_table>;
1414				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1415						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1416				interconnect-names = "qup-core", "qup-config";
1417				status = "disabled";
1418			};
1419
1420			i2c11: i2c@a94000 {
1421				compatible = "qcom,geni-i2c";
1422				reg = <0 0x00a94000 0 0x4000>;
1423				clock-names = "se";
1424				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1425				pinctrl-names = "default";
1426				pinctrl-0 = <&qup_i2c11_default>;
1427				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1428				#address-cells = <1>;
1429				#size-cells = <0>;
1430				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1431						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1432						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1433				interconnect-names = "qup-core", "qup-config",
1434							"qup-memory";
1435				power-domains = <&rpmhpd SC7180_CX>;
1436				required-opps = <&rpmhpd_opp_low_svs>;
1437				status = "disabled";
1438			};
1439
1440			spi11: spi@a94000 {
1441				compatible = "qcom,geni-spi";
1442				reg = <0 0x00a94000 0 0x4000>;
1443				clock-names = "se";
1444				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1445				pinctrl-names = "default";
1446				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
1447				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1448				#address-cells = <1>;
1449				#size-cells = <0>;
1450				power-domains = <&rpmhpd SC7180_CX>;
1451				operating-points-v2 = <&qup_opp_table>;
1452				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1453						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1454				interconnect-names = "qup-core", "qup-config";
1455				status = "disabled";
1456			};
1457
1458			uart11: serial@a94000 {
1459				compatible = "qcom,geni-uart";
1460				reg = <0 0x00a94000 0 0x4000>;
1461				clock-names = "se";
1462				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1463				pinctrl-names = "default";
1464				pinctrl-0 = <&qup_uart11_default>;
1465				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1466				power-domains = <&rpmhpd SC7180_CX>;
1467				operating-points-v2 = <&qup_opp_table>;
1468				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1469						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1470				interconnect-names = "qup-core", "qup-config";
1471				status = "disabled";
1472			};
1473		};
1474
1475		config_noc: interconnect@1500000 {
1476			compatible = "qcom,sc7180-config-noc";
1477			reg = <0 0x01500000 0 0x28000>;
1478			#interconnect-cells = <2>;
1479			qcom,bcm-voters = <&apps_bcm_voter>;
1480		};
1481
1482		system_noc: interconnect@1620000 {
1483			compatible = "qcom,sc7180-system-noc";
1484			reg = <0 0x01620000 0 0x17080>;
1485			#interconnect-cells = <2>;
1486			qcom,bcm-voters = <&apps_bcm_voter>;
1487		};
1488
1489		mc_virt: interconnect@1638000 {
1490			compatible = "qcom,sc7180-mc-virt";
1491			reg = <0 0x01638000 0 0x1000>;
1492			#interconnect-cells = <2>;
1493			qcom,bcm-voters = <&apps_bcm_voter>;
1494		};
1495
1496		qup_virt: interconnect@1650000 {
1497			compatible = "qcom,sc7180-qup-virt";
1498			reg = <0 0x01650000 0 0x1000>;
1499			#interconnect-cells = <2>;
1500			qcom,bcm-voters = <&apps_bcm_voter>;
1501		};
1502
1503		aggre1_noc: interconnect@16e0000 {
1504			compatible = "qcom,sc7180-aggre1-noc";
1505			reg = <0 0x016e0000 0 0x15080>;
1506			#interconnect-cells = <2>;
1507			qcom,bcm-voters = <&apps_bcm_voter>;
1508		};
1509
1510		aggre2_noc: interconnect@1705000 {
1511			compatible = "qcom,sc7180-aggre2-noc";
1512			reg = <0 0x01705000 0 0x9000>;
1513			#interconnect-cells = <2>;
1514			qcom,bcm-voters = <&apps_bcm_voter>;
1515		};
1516
1517		compute_noc: interconnect@170e000 {
1518			compatible = "qcom,sc7180-compute-noc";
1519			reg = <0 0x0170e000 0 0x6000>;
1520			#interconnect-cells = <2>;
1521			qcom,bcm-voters = <&apps_bcm_voter>;
1522		};
1523
1524		mmss_noc: interconnect@1740000 {
1525			compatible = "qcom,sc7180-mmss-noc";
1526			reg = <0 0x01740000 0 0x1c100>;
1527			#interconnect-cells = <2>;
1528			qcom,bcm-voters = <&apps_bcm_voter>;
1529		};
1530
1531		ipa: ipa@1e40000 {
1532			compatible = "qcom,sc7180-ipa";
1533
1534			iommus = <&apps_smmu 0x440 0x0>,
1535				 <&apps_smmu 0x442 0x0>;
1536			reg = <0 0x01e40000 0 0x7000>,
1537			      <0 0x01e47000 0 0x2000>,
1538			      <0 0x01e04000 0 0x2c000>;
1539			reg-names = "ipa-reg",
1540				    "ipa-shared",
1541				    "gsi";
1542
1543			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
1544					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
1545					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1546					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
1547			interrupt-names = "ipa",
1548					  "gsi",
1549					  "ipa-clock-query",
1550					  "ipa-setup-ready";
1551
1552			clocks = <&rpmhcc RPMH_IPA_CLK>;
1553			clock-names = "core";
1554
1555			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
1556					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
1557					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
1558			interconnect-names = "memory",
1559					     "imem",
1560					     "config";
1561
1562			qcom,qmp = <&aoss_qmp>;
1563
1564			qcom,smem-states = <&ipa_smp2p_out 0>,
1565					   <&ipa_smp2p_out 1>;
1566			qcom,smem-state-names = "ipa-clock-enabled-valid",
1567						"ipa-clock-enabled";
1568
1569			status = "disabled";
1570		};
1571
1572		tcsr_mutex: hwlock@1f40000 {
1573			compatible = "qcom,tcsr-mutex";
1574			reg = <0 0x01f40000 0 0x20000>;
1575			#hwlock-cells = <1>;
1576		};
1577
1578		tcsr_regs_1: syscon@1f60000 {
1579			compatible = "qcom,sc7180-tcsr", "syscon";
1580			reg = <0 0x01f60000 0 0x20000>;
1581		};
1582
1583		tcsr_regs_2: syscon@1fc0000 {
1584			compatible = "qcom,sc7180-tcsr", "syscon";
1585			reg = <0 0x01fc0000 0 0x40000>;
1586		};
1587
1588		tlmm: pinctrl@3500000 {
1589			compatible = "qcom,sc7180-pinctrl";
1590			reg = <0 0x03500000 0 0x300000>,
1591			      <0 0x03900000 0 0x300000>,
1592			      <0 0x03d00000 0 0x300000>;
1593			reg-names = "west", "north", "south";
1594			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1595			gpio-controller;
1596			#gpio-cells = <2>;
1597			interrupt-controller;
1598			#interrupt-cells = <2>;
1599			gpio-ranges = <&tlmm 0 0 120>;
1600			wakeup-parent = <&pdc>;
1601
1602			dp_hot_plug_det: dp-hot-plug-det-state {
1603				pins = "gpio117";
1604				function = "dp_hot";
1605			};
1606
1607			qspi_clk: qspi-clk-state {
1608				pins = "gpio63";
1609				function = "qspi_clk";
1610			};
1611
1612			qspi_cs0: qspi-cs0-state {
1613				pins = "gpio68";
1614				function = "qspi_cs";
1615			};
1616
1617			qspi_cs1: qspi-cs1-state {
1618				pins = "gpio72";
1619				function = "qspi_cs";
1620			};
1621
1622			qspi_data0: qspi-data0-state {
1623				pins = "gpio64";
1624				function = "qspi_data";
1625			};
1626
1627			qspi_data1: qspi-data1-state {
1628				pins = "gpio65";
1629				function = "qspi_data";
1630			};
1631
1632			qspi_data23: qspi-data23-state {
1633				pins = "gpio66", "gpio67";
1634				function = "qspi_data";
1635			};
1636
1637			qup_i2c0_default: qup-i2c0-default-state {
1638				pins = "gpio34", "gpio35";
1639				function = "qup00";
1640			};
1641
1642			qup_i2c1_default: qup-i2c1-default-state {
1643				pins = "gpio0", "gpio1";
1644				function = "qup01";
1645			};
1646
1647			qup_i2c2_default: qup-i2c2-default-state {
1648				pins = "gpio15", "gpio16";
1649				function = "qup02_i2c";
1650			};
1651
1652			qup_i2c3_default: qup-i2c3-default-state {
1653				pins = "gpio38", "gpio39";
1654				function = "qup03";
1655			};
1656
1657			qup_i2c4_default: qup-i2c4-default-state {
1658				pins = "gpio115", "gpio116";
1659				function = "qup04_i2c";
1660			};
1661
1662			qup_i2c5_default: qup-i2c5-default-state {
1663				pins = "gpio25", "gpio26";
1664				function = "qup05";
1665			};
1666
1667			qup_i2c6_default: qup-i2c6-default-state {
1668				pins = "gpio59", "gpio60";
1669				function = "qup10";
1670			};
1671
1672			qup_i2c7_default: qup-i2c7-default-state {
1673				pins = "gpio6", "gpio7";
1674				function = "qup11_i2c";
1675			};
1676
1677			qup_i2c8_default: qup-i2c8-default-state {
1678				pins = "gpio42", "gpio43";
1679				function = "qup12";
1680			};
1681
1682			qup_i2c9_default: qup-i2c9-default-state {
1683				pins = "gpio46", "gpio47";
1684				function = "qup13_i2c";
1685			};
1686
1687			qup_i2c10_default: qup-i2c10-default-state {
1688				pins = "gpio86", "gpio87";
1689				function = "qup14";
1690			};
1691
1692			qup_i2c11_default: qup-i2c11-default-state {
1693				pins = "gpio53", "gpio54";
1694				function = "qup15";
1695			};
1696
1697			qup_spi0_spi: qup-spi0-spi-state {
1698				pins = "gpio34", "gpio35", "gpio36";
1699				function = "qup00";
1700			};
1701
1702			qup_spi0_cs: qup-spi0-cs-state {
1703				pins = "gpio37";
1704				function = "qup00";
1705			};
1706
1707			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
1708				pins = "gpio37";
1709				function = "gpio";
1710			};
1711
1712			qup_spi1_spi: qup-spi1-spi-state {
1713				pins = "gpio0", "gpio1", "gpio2";
1714				function = "qup01";
1715			};
1716
1717			qup_spi1_cs: qup-spi1-cs-state {
1718				pins = "gpio3";
1719				function = "qup01";
1720			};
1721
1722			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
1723				pins = "gpio3";
1724				function = "gpio";
1725			};
1726
1727			qup_spi3_spi: qup-spi3-spi-state {
1728				pins = "gpio38", "gpio39", "gpio40";
1729				function = "qup03";
1730			};
1731
1732			qup_spi3_cs: qup-spi3-cs-state {
1733				pins = "gpio41";
1734				function = "qup03";
1735			};
1736
1737			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
1738				pins = "gpio41";
1739				function = "gpio";
1740			};
1741
1742			qup_spi5_spi: qup-spi5-spi-state {
1743				pins = "gpio25", "gpio26", "gpio27";
1744				function = "qup05";
1745			};
1746
1747			qup_spi5_cs: qup-spi5-cs-state {
1748				pins = "gpio28";
1749				function = "qup05";
1750			};
1751
1752			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
1753				pins = "gpio28";
1754				function = "gpio";
1755			};
1756
1757			qup_spi6_spi: qup-spi6-spi-state {
1758				pins = "gpio59", "gpio60", "gpio61";
1759				function = "qup10";
1760			};
1761
1762			qup_spi6_cs: qup-spi6-cs-state {
1763				pins = "gpio62";
1764				function = "qup10";
1765			};
1766
1767			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
1768				pins = "gpio62";
1769				function = "gpio";
1770			};
1771
1772			qup_spi8_spi: qup-spi8-spi-state {
1773				pins = "gpio42", "gpio43", "gpio44";
1774				function = "qup12";
1775			};
1776
1777			qup_spi8_cs: qup-spi8-cs-state {
1778				pins = "gpio45";
1779				function = "qup12";
1780			};
1781
1782			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
1783				pins = "gpio45";
1784				function = "gpio";
1785			};
1786
1787			qup_spi10_spi: qup-spi10-spi-state {
1788				pins = "gpio86", "gpio87", "gpio88";
1789				function = "qup14";
1790			};
1791
1792			qup_spi10_cs: qup-spi10-cs-state {
1793				pins = "gpio89";
1794				function = "qup14";
1795			};
1796
1797			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
1798				pins = "gpio89";
1799				function = "gpio";
1800			};
1801
1802			qup_spi11_spi: qup-spi11-spi-state {
1803				pins = "gpio53", "gpio54", "gpio55";
1804				function = "qup15";
1805			};
1806
1807			qup_spi11_cs: qup-spi11-cs-state {
1808				pins = "gpio56";
1809				function = "qup15";
1810			};
1811
1812			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
1813				pins = "gpio56";
1814				function = "gpio";
1815			};
1816
1817			qup_uart0_default: qup-uart0-default-state {
1818				qup_uart0_cts: cts-pins {
1819					pins = "gpio34";
1820					function = "qup00";
1821				};
1822
1823				qup_uart0_rts: rts-pins {
1824					pins = "gpio35";
1825					function = "qup00";
1826				};
1827
1828				qup_uart0_tx: tx-pins {
1829					pins = "gpio36";
1830					function = "qup00";
1831				};
1832
1833				qup_uart0_rx: rx-pins {
1834					pins = "gpio37";
1835					function = "qup00";
1836				};
1837			};
1838
1839			qup_uart1_default: qup-uart1-default-state {
1840				qup_uart1_cts: cts-pins {
1841					pins = "gpio0";
1842					function = "qup01";
1843				};
1844
1845				qup_uart1_rts: rts-pins {
1846					pins = "gpio1";
1847					function = "qup01";
1848				};
1849
1850				qup_uart1_tx: tx-pins {
1851					pins = "gpio2";
1852					function = "qup01";
1853				};
1854
1855				qup_uart1_rx: rx-pins {
1856					pins = "gpio3";
1857					function = "qup01";
1858				};
1859			};
1860
1861			qup_uart2_default: qup-uart2-default-state {
1862				qup_uart2_tx: tx-pins {
1863					pins = "gpio15";
1864					function = "qup02_uart";
1865				};
1866
1867				qup_uart2_rx: rx-pins {
1868					pins = "gpio16";
1869					function = "qup02_uart";
1870				};
1871			};
1872
1873			qup_uart3_default: qup-uart3-default-state {
1874				qup_uart3_cts: cts-pins {
1875					pins = "gpio38";
1876					function = "qup03";
1877				};
1878
1879				qup_uart3_rts: rts-pins {
1880					pins = "gpio39";
1881					function = "qup03";
1882				};
1883
1884				qup_uart3_tx: tx-pins {
1885					pins = "gpio40";
1886					function = "qup03";
1887				};
1888
1889				qup_uart3_rx: rx-pins {
1890					pins = "gpio41";
1891					function = "qup03";
1892				};
1893			};
1894
1895			qup_uart4_default: qup-uart4-default-state {
1896				qup_uart4_tx: tx-pins {
1897					pins = "gpio115";
1898					function = "qup04_uart";
1899				};
1900
1901				qup_uart4_rx: rx-pins {
1902					pins = "gpio116";
1903					function = "qup04_uart";
1904				};
1905			};
1906
1907			qup_uart5_default: qup-uart5-default-state {
1908				qup_uart5_cts: cts-pins {
1909					pins = "gpio25";
1910					function = "qup05";
1911				};
1912
1913				qup_uart5_rts: rts-pins {
1914					pins = "gpio26";
1915					function = "qup05";
1916				};
1917
1918				qup_uart5_tx: tx-pins {
1919					pins = "gpio27";
1920					function = "qup05";
1921				};
1922
1923				qup_uart5_rx: rx-pins {
1924					pins = "gpio28";
1925					function = "qup05";
1926				};
1927			};
1928
1929			qup_uart6_default: qup-uart6-default-state {
1930				qup_uart6_cts: cts-pins {
1931					pins = "gpio59";
1932					function = "qup10";
1933				};
1934
1935				qup_uart6_rts: rts-pins {
1936					pins = "gpio60";
1937					function = "qup10";
1938				};
1939
1940				qup_uart6_tx: tx-pins {
1941					pins = "gpio61";
1942					function = "qup10";
1943				};
1944
1945				qup_uart6_rx: rx-pins {
1946					pins = "gpio62";
1947					function = "qup10";
1948				};
1949			};
1950
1951			qup_uart7_default: qup-uart7-default-state {
1952				qup_uart7_tx: tx-pins {
1953					pins = "gpio6";
1954					function = "qup11_uart";
1955				};
1956
1957				qup_uart7_rx: rx-pins {
1958					pins = "gpio7";
1959					function = "qup11_uart";
1960				};
1961			};
1962
1963			qup_uart8_default: qup-uart8-default-state {
1964				qup_uart8_tx: tx-pins {
1965					pins = "gpio44";
1966					function = "qup12";
1967				};
1968
1969				qup_uart8_rx: rx-pins {
1970					pins = "gpio45";
1971					function = "qup12";
1972				};
1973			};
1974
1975			qup_uart9_default: qup-uart9-default-state {
1976				qup_uart9_tx: tx-pins {
1977					pins = "gpio46";
1978					function = "qup13_uart";
1979				};
1980
1981				qup_uart9_rx: rx-pins {
1982					pins = "gpio47";
1983					function = "qup13_uart";
1984				};
1985			};
1986
1987			qup_uart10_default: qup-uart10-default-state {
1988				qup_uart10_cts: cts-pins {
1989					pins = "gpio86";
1990					function = "qup14";
1991				};
1992
1993				qup_uart10_rts: rts-pins {
1994					pins = "gpio87";
1995					function = "qup14";
1996				};
1997
1998				qup_uart10_tx: tx-pins {
1999					pins = "gpio88";
2000					function = "qup14";
2001				};
2002
2003				qup_uart10_rx: rx-pins {
2004					pins = "gpio89";
2005					function = "qup14";
2006				};
2007			};
2008
2009			qup_uart11_default: qup-uart11-default-state {
2010				qup_uart11_cts: cts-pins {
2011					pins = "gpio53";
2012					function = "qup15";
2013				};
2014
2015				qup_uart11_rts: rts-pins {
2016					pins = "gpio54";
2017					function = "qup15";
2018				};
2019
2020				qup_uart11_tx: tx-pins {
2021					pins = "gpio55";
2022					function = "qup15";
2023				};
2024
2025				qup_uart11_rx: rx-pins {
2026					pins = "gpio56";
2027					function = "qup15";
2028				};
2029			};
2030
2031			sec_mi2s_active: sec-mi2s-active-state {
2032				pins = "gpio49", "gpio50", "gpio51";
2033				function = "mi2s_1";
2034			};
2035
2036			pri_mi2s_active: pri-mi2s-active-state {
2037				pins = "gpio53", "gpio54", "gpio55", "gpio56";
2038				function = "mi2s_0";
2039			};
2040
2041			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
2042				pins = "gpio57";
2043				function = "lpass_ext";
2044			};
2045		};
2046
2047		remoteproc_mpss: remoteproc@4080000 {
2048			compatible = "qcom,sc7180-mpss-pas";
2049			reg = <0 0x04080000 0 0x4040>;
2050
2051			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
2052					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2053					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2054					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2055					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
2056					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
2057			interrupt-names = "wdog", "fatal", "ready", "handover",
2058					  "stop-ack", "shutdown-ack";
2059
2060			clocks = <&rpmhcc RPMH_CXO_CLK>;
2061			clock-names = "xo";
2062
2063			power-domains = <&rpmhpd SC7180_CX>,
2064					<&rpmhpd SC7180_MX>,
2065					<&rpmhpd SC7180_MSS>;
2066			power-domain-names = "cx", "mx", "mss";
2067
2068			memory-region = <&mpss_mem>;
2069
2070			qcom,qmp = <&aoss_qmp>;
2071
2072			qcom,smem-states = <&modem_smp2p_out 0>;
2073			qcom,smem-state-names = "stop";
2074
2075			status = "disabled";
2076
2077			glink-edge {
2078				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
2079				label = "modem";
2080				qcom,remote-pid = <1>;
2081				mboxes = <&apss_shared 12>;
2082			};
2083		};
2084
2085		gpu: gpu@5000000 {
2086			compatible = "qcom,adreno-618.0", "qcom,adreno";
2087			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
2088				<0 0x05061000 0 0x800>;
2089			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
2090			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2091			iommus = <&adreno_smmu 0>;
2092			operating-points-v2 = <&gpu_opp_table>;
2093			qcom,gmu = <&gmu>;
2094
2095			#cooling-cells = <2>;
2096
2097			nvmem-cells = <&gpu_speed_bin>;
2098			nvmem-cell-names = "speed_bin";
2099
2100			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
2101			interconnect-names = "gfx-mem";
2102
2103			gpu_opp_table: opp-table {
2104				compatible = "operating-points-v2";
2105
2106				opp-825000000 {
2107					opp-hz = /bits/ 64 <825000000>;
2108					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
2109					opp-peak-kBps = <8532000>;
2110					opp-supported-hw = <0x04>;
2111				};
2112
2113				opp-800000000 {
2114					opp-hz = /bits/ 64 <800000000>;
2115					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2116					opp-peak-kBps = <8532000>;
2117					opp-supported-hw = <0x07>;
2118				};
2119
2120				opp-650000000 {
2121					opp-hz = /bits/ 64 <650000000>;
2122					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2123					opp-peak-kBps = <7216000>;
2124					opp-supported-hw = <0x07>;
2125				};
2126
2127				opp-565000000 {
2128					opp-hz = /bits/ 64 <565000000>;
2129					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2130					opp-peak-kBps = <5412000>;
2131					opp-supported-hw = <0x07>;
2132				};
2133
2134				opp-430000000 {
2135					opp-hz = /bits/ 64 <430000000>;
2136					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2137					opp-peak-kBps = <5412000>;
2138					opp-supported-hw = <0x07>;
2139				};
2140
2141				opp-355000000 {
2142					opp-hz = /bits/ 64 <355000000>;
2143					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2144					opp-peak-kBps = <3072000>;
2145					opp-supported-hw = <0x07>;
2146				};
2147
2148				opp-267000000 {
2149					opp-hz = /bits/ 64 <267000000>;
2150					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2151					opp-peak-kBps = <3072000>;
2152					opp-supported-hw = <0x07>;
2153				};
2154
2155				opp-180000000 {
2156					opp-hz = /bits/ 64 <180000000>;
2157					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2158					opp-peak-kBps = <1804000>;
2159					opp-supported-hw = <0x07>;
2160				};
2161			};
2162		};
2163
2164		adreno_smmu: iommu@5040000 {
2165			compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
2166			reg = <0 0x05040000 0 0x10000>;
2167			#iommu-cells = <1>;
2168			#global-interrupts = <2>;
2169			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
2170					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
2171					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
2172					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
2173					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
2174					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
2175					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
2176					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
2177					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
2178					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
2179
2180			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2181				<&gcc GCC_GPU_CFG_AHB_CLK>;
2182			clock-names = "bus", "iface";
2183
2184			power-domains = <&gpucc CX_GDSC>;
2185		};
2186
2187		gmu: gmu@506a000 {
2188			compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
2189			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
2190				<0 0x0b490000 0 0x10000>;
2191			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
2192			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2193				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2194			interrupt-names = "hfi", "gmu";
2195			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
2196			       <&gpucc GPU_CC_CXO_CLK>,
2197			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2198			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2199			clock-names = "gmu", "cxo", "axi", "memnoc";
2200			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
2201			power-domain-names = "cx", "gx";
2202			iommus = <&adreno_smmu 5>;
2203			operating-points-v2 = <&gmu_opp_table>;
2204
2205			gmu_opp_table: opp-table {
2206				compatible = "operating-points-v2";
2207
2208				opp-200000000 {
2209					opp-hz = /bits/ 64 <200000000>;
2210					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2211				};
2212			};
2213		};
2214
2215		gpucc: clock-controller@5090000 {
2216			compatible = "qcom,sc7180-gpucc";
2217			reg = <0 0x05090000 0 0x9000>;
2218			clocks = <&rpmhcc RPMH_CXO_CLK>,
2219				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2220				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2221			clock-names = "bi_tcxo",
2222				      "gcc_gpu_gpll0_clk_src",
2223				      "gcc_gpu_gpll0_div_clk_src";
2224			#clock-cells = <1>;
2225			#reset-cells = <1>;
2226			#power-domain-cells = <1>;
2227		};
2228
2229		dma@10a2000 {
2230			compatible = "qcom,sc7180-dcc", "qcom,dcc";
2231			reg = <0x0 0x010a2000 0x0 0x1000>,
2232			      <0x0 0x010ae000 0x0 0x2000>;
2233		};
2234
2235		stm@6002000 {
2236			compatible = "arm,coresight-stm", "arm,primecell";
2237			reg = <0 0x06002000 0 0x1000>,
2238			      <0 0x16280000 0 0x180000>;
2239			reg-names = "stm-base", "stm-stimulus-base";
2240
2241			clocks = <&aoss_qmp>;
2242			clock-names = "apb_pclk";
2243
2244			out-ports {
2245				port {
2246					stm_out: endpoint {
2247						remote-endpoint = <&funnel0_in7>;
2248					};
2249				};
2250			};
2251		};
2252
2253		funnel@6041000 {
2254			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2255			reg = <0 0x06041000 0 0x1000>;
2256
2257			clocks = <&aoss_qmp>;
2258			clock-names = "apb_pclk";
2259
2260			out-ports {
2261				port {
2262					funnel0_out: endpoint {
2263						remote-endpoint = <&merge_funnel_in0>;
2264					};
2265				};
2266			};
2267
2268			in-ports {
2269				#address-cells = <1>;
2270				#size-cells = <0>;
2271
2272				port@7 {
2273					reg = <7>;
2274					funnel0_in7: endpoint {
2275						remote-endpoint = <&stm_out>;
2276					};
2277				};
2278			};
2279		};
2280
2281		funnel@6042000 {
2282			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2283			reg = <0 0x06042000 0 0x1000>;
2284
2285			clocks = <&aoss_qmp>;
2286			clock-names = "apb_pclk";
2287
2288			out-ports {
2289				port {
2290					funnel1_out: endpoint {
2291						remote-endpoint = <&merge_funnel_in1>;
2292					};
2293				};
2294			};
2295
2296			in-ports {
2297				#address-cells = <1>;
2298				#size-cells = <0>;
2299
2300				port@4 {
2301					reg = <4>;
2302					funnel1_in4: endpoint {
2303						remote-endpoint = <&apss_merge_funnel_out>;
2304					};
2305				};
2306			};
2307		};
2308
2309		funnel@6045000 {
2310			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2311			reg = <0 0x06045000 0 0x1000>;
2312
2313			clocks = <&aoss_qmp>;
2314			clock-names = "apb_pclk";
2315
2316			out-ports {
2317				port {
2318					merge_funnel_out: endpoint {
2319						remote-endpoint = <&swao_funnel_in>;
2320					};
2321				};
2322			};
2323
2324			in-ports {
2325				#address-cells = <1>;
2326				#size-cells = <0>;
2327
2328				port@0 {
2329					reg = <0>;
2330					merge_funnel_in0: endpoint {
2331						remote-endpoint = <&funnel0_out>;
2332					};
2333				};
2334
2335				port@1 {
2336					reg = <1>;
2337					merge_funnel_in1: endpoint {
2338						remote-endpoint = <&funnel1_out>;
2339					};
2340				};
2341			};
2342		};
2343
2344		replicator@6046000 {
2345			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2346			reg = <0 0x06046000 0 0x1000>;
2347
2348			clocks = <&aoss_qmp>;
2349			clock-names = "apb_pclk";
2350
2351			out-ports {
2352				port {
2353					replicator_out: endpoint {
2354						remote-endpoint = <&etr_in>;
2355					};
2356				};
2357			};
2358
2359			in-ports {
2360				port {
2361					replicator_in: endpoint {
2362						remote-endpoint = <&swao_replicator_out>;
2363					};
2364				};
2365			};
2366		};
2367
2368		etr@6048000 {
2369			compatible = "arm,coresight-tmc", "arm,primecell";
2370			reg = <0 0x06048000 0 0x1000>;
2371			iommus = <&apps_smmu 0x04a0 0x20>;
2372
2373			clocks = <&aoss_qmp>;
2374			clock-names = "apb_pclk";
2375			arm,scatter-gather;
2376
2377			in-ports {
2378				port {
2379					etr_in: endpoint {
2380						remote-endpoint = <&replicator_out>;
2381					};
2382				};
2383			};
2384		};
2385
2386		funnel@6b04000 {
2387			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2388			reg = <0 0x06b04000 0 0x1000>;
2389
2390			clocks = <&aoss_qmp>;
2391			clock-names = "apb_pclk";
2392
2393			out-ports {
2394				port {
2395					swao_funnel_out: endpoint {
2396						remote-endpoint = <&etf_in>;
2397					};
2398				};
2399			};
2400
2401			in-ports {
2402				#address-cells = <1>;
2403				#size-cells = <0>;
2404
2405				port@7 {
2406					reg = <7>;
2407					swao_funnel_in: endpoint {
2408						remote-endpoint = <&merge_funnel_out>;
2409					};
2410				};
2411			};
2412		};
2413
2414		etf@6b05000 {
2415			compatible = "arm,coresight-tmc", "arm,primecell";
2416			reg = <0 0x06b05000 0 0x1000>;
2417
2418			clocks = <&aoss_qmp>;
2419			clock-names = "apb_pclk";
2420
2421			out-ports {
2422				port {
2423					etf_out: endpoint {
2424						remote-endpoint = <&swao_replicator_in>;
2425					};
2426				};
2427			};
2428
2429			in-ports {
2430				port {
2431					etf_in: endpoint {
2432						remote-endpoint = <&swao_funnel_out>;
2433					};
2434				};
2435			};
2436		};
2437
2438		replicator@6b06000 {
2439			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2440			reg = <0 0x06b06000 0 0x1000>;
2441
2442			clocks = <&aoss_qmp>;
2443			clock-names = "apb_pclk";
2444			qcom,replicator-loses-context;
2445
2446			out-ports {
2447				port {
2448					swao_replicator_out: endpoint {
2449						remote-endpoint = <&replicator_in>;
2450					};
2451				};
2452			};
2453
2454			in-ports {
2455				port {
2456					swao_replicator_in: endpoint {
2457						remote-endpoint = <&etf_out>;
2458					};
2459				};
2460			};
2461		};
2462
2463		etm@7040000 {
2464			compatible = "arm,coresight-etm4x", "arm,primecell";
2465			reg = <0 0x07040000 0 0x1000>;
2466
2467			cpu = <&CPU0>;
2468
2469			clocks = <&aoss_qmp>;
2470			clock-names = "apb_pclk";
2471			arm,coresight-loses-context-with-cpu;
2472			qcom,skip-power-up;
2473
2474			out-ports {
2475				port {
2476					etm0_out: endpoint {
2477						remote-endpoint = <&apss_funnel_in0>;
2478					};
2479				};
2480			};
2481		};
2482
2483		etm@7140000 {
2484			compatible = "arm,coresight-etm4x", "arm,primecell";
2485			reg = <0 0x07140000 0 0x1000>;
2486
2487			cpu = <&CPU1>;
2488
2489			clocks = <&aoss_qmp>;
2490			clock-names = "apb_pclk";
2491			arm,coresight-loses-context-with-cpu;
2492			qcom,skip-power-up;
2493
2494			out-ports {
2495				port {
2496					etm1_out: endpoint {
2497						remote-endpoint = <&apss_funnel_in1>;
2498					};
2499				};
2500			};
2501		};
2502
2503		etm@7240000 {
2504			compatible = "arm,coresight-etm4x", "arm,primecell";
2505			reg = <0 0x07240000 0 0x1000>;
2506
2507			cpu = <&CPU2>;
2508
2509			clocks = <&aoss_qmp>;
2510			clock-names = "apb_pclk";
2511			arm,coresight-loses-context-with-cpu;
2512			qcom,skip-power-up;
2513
2514			out-ports {
2515				port {
2516					etm2_out: endpoint {
2517						remote-endpoint = <&apss_funnel_in2>;
2518					};
2519				};
2520			};
2521		};
2522
2523		etm@7340000 {
2524			compatible = "arm,coresight-etm4x", "arm,primecell";
2525			reg = <0 0x07340000 0 0x1000>;
2526
2527			cpu = <&CPU3>;
2528
2529			clocks = <&aoss_qmp>;
2530			clock-names = "apb_pclk";
2531			arm,coresight-loses-context-with-cpu;
2532			qcom,skip-power-up;
2533
2534			out-ports {
2535				port {
2536					etm3_out: endpoint {
2537						remote-endpoint = <&apss_funnel_in3>;
2538					};
2539				};
2540			};
2541		};
2542
2543		etm@7440000 {
2544			compatible = "arm,coresight-etm4x", "arm,primecell";
2545			reg = <0 0x07440000 0 0x1000>;
2546
2547			cpu = <&CPU4>;
2548
2549			clocks = <&aoss_qmp>;
2550			clock-names = "apb_pclk";
2551			arm,coresight-loses-context-with-cpu;
2552			qcom,skip-power-up;
2553
2554			out-ports {
2555				port {
2556					etm4_out: endpoint {
2557						remote-endpoint = <&apss_funnel_in4>;
2558					};
2559				};
2560			};
2561		};
2562
2563		etm@7540000 {
2564			compatible = "arm,coresight-etm4x", "arm,primecell";
2565			reg = <0 0x07540000 0 0x1000>;
2566
2567			cpu = <&CPU5>;
2568
2569			clocks = <&aoss_qmp>;
2570			clock-names = "apb_pclk";
2571			arm,coresight-loses-context-with-cpu;
2572			qcom,skip-power-up;
2573
2574			out-ports {
2575				port {
2576					etm5_out: endpoint {
2577						remote-endpoint = <&apss_funnel_in5>;
2578					};
2579				};
2580			};
2581		};
2582
2583		etm@7640000 {
2584			compatible = "arm,coresight-etm4x", "arm,primecell";
2585			reg = <0 0x07640000 0 0x1000>;
2586
2587			cpu = <&CPU6>;
2588
2589			clocks = <&aoss_qmp>;
2590			clock-names = "apb_pclk";
2591			arm,coresight-loses-context-with-cpu;
2592			qcom,skip-power-up;
2593
2594			out-ports {
2595				port {
2596					etm6_out: endpoint {
2597						remote-endpoint = <&apss_funnel_in6>;
2598					};
2599				};
2600			};
2601		};
2602
2603		etm@7740000 {
2604			compatible = "arm,coresight-etm4x", "arm,primecell";
2605			reg = <0 0x07740000 0 0x1000>;
2606
2607			cpu = <&CPU7>;
2608
2609			clocks = <&aoss_qmp>;
2610			clock-names = "apb_pclk";
2611			arm,coresight-loses-context-with-cpu;
2612			qcom,skip-power-up;
2613
2614			out-ports {
2615				port {
2616					etm7_out: endpoint {
2617						remote-endpoint = <&apss_funnel_in7>;
2618					};
2619				};
2620			};
2621		};
2622
2623		funnel@7800000 { /* APSS Funnel */
2624			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2625			reg = <0 0x07800000 0 0x1000>;
2626
2627			clocks = <&aoss_qmp>;
2628			clock-names = "apb_pclk";
2629
2630			out-ports {
2631				port {
2632					apss_funnel_out: endpoint {
2633						remote-endpoint = <&apss_merge_funnel_in>;
2634					};
2635				};
2636			};
2637
2638			in-ports {
2639				#address-cells = <1>;
2640				#size-cells = <0>;
2641
2642				port@0 {
2643					reg = <0>;
2644					apss_funnel_in0: endpoint {
2645						remote-endpoint = <&etm0_out>;
2646					};
2647				};
2648
2649				port@1 {
2650					reg = <1>;
2651					apss_funnel_in1: endpoint {
2652						remote-endpoint = <&etm1_out>;
2653					};
2654				};
2655
2656				port@2 {
2657					reg = <2>;
2658					apss_funnel_in2: endpoint {
2659						remote-endpoint = <&etm2_out>;
2660					};
2661				};
2662
2663				port@3 {
2664					reg = <3>;
2665					apss_funnel_in3: endpoint {
2666						remote-endpoint = <&etm3_out>;
2667					};
2668				};
2669
2670				port@4 {
2671					reg = <4>;
2672					apss_funnel_in4: endpoint {
2673						remote-endpoint = <&etm4_out>;
2674					};
2675				};
2676
2677				port@5 {
2678					reg = <5>;
2679					apss_funnel_in5: endpoint {
2680						remote-endpoint = <&etm5_out>;
2681					};
2682				};
2683
2684				port@6 {
2685					reg = <6>;
2686					apss_funnel_in6: endpoint {
2687						remote-endpoint = <&etm6_out>;
2688					};
2689				};
2690
2691				port@7 {
2692					reg = <7>;
2693					apss_funnel_in7: endpoint {
2694						remote-endpoint = <&etm7_out>;
2695					};
2696				};
2697			};
2698		};
2699
2700		funnel@7810000 {
2701			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2702			reg = <0 0x07810000 0 0x1000>;
2703
2704			clocks = <&aoss_qmp>;
2705			clock-names = "apb_pclk";
2706
2707			out-ports {
2708				port {
2709					apss_merge_funnel_out: endpoint {
2710						remote-endpoint = <&funnel1_in4>;
2711					};
2712				};
2713			};
2714
2715			in-ports {
2716				port {
2717					apss_merge_funnel_in: endpoint {
2718						remote-endpoint = <&apss_funnel_out>;
2719					};
2720				};
2721			};
2722		};
2723
2724		sdhc_2: mmc@8804000 {
2725			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
2726			reg = <0 0x08804000 0 0x1000>;
2727
2728			iommus = <&apps_smmu 0x80 0>;
2729			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
2730					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
2731			interrupt-names = "hc_irq", "pwr_irq";
2732
2733			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2734				 <&gcc GCC_SDCC2_APPS_CLK>,
2735				 <&rpmhcc RPMH_CXO_CLK>;
2736			clock-names = "iface", "core", "xo";
2737
2738			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
2739					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
2740			interconnect-names = "sdhc-ddr","cpu-sdhc";
2741			power-domains = <&rpmhpd SC7180_CX>;
2742			operating-points-v2 = <&sdhc2_opp_table>;
2743
2744			bus-width = <4>;
2745
2746			status = "disabled";
2747
2748			sdhc2_opp_table: opp-table {
2749				compatible = "operating-points-v2";
2750
2751				opp-100000000 {
2752					opp-hz = /bits/ 64 <100000000>;
2753					required-opps = <&rpmhpd_opp_low_svs>;
2754					opp-peak-kBps = <1800000 600000>;
2755					opp-avg-kBps = <100000 0>;
2756				};
2757
2758				opp-202000000 {
2759					opp-hz = /bits/ 64 <202000000>;
2760					required-opps = <&rpmhpd_opp_nom>;
2761					opp-peak-kBps = <5400000 1600000>;
2762					opp-avg-kBps = <200000 0>;
2763				};
2764			};
2765		};
2766
2767		qspi: spi@88dc000 {
2768			compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
2769			reg = <0 0x088dc000 0 0x600>;
2770			iommus = <&apps_smmu 0x20 0x0>;
2771			#address-cells = <1>;
2772			#size-cells = <0>;
2773			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
2774			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
2775				 <&gcc GCC_QSPI_CORE_CLK>;
2776			clock-names = "iface", "core";
2777			interconnects = <&gem_noc MASTER_APPSS_PROC 0
2778					&config_noc SLAVE_QSPI_0 0>;
2779			interconnect-names = "qspi-config";
2780			power-domains = <&rpmhpd SC7180_CX>;
2781			operating-points-v2 = <&qspi_opp_table>;
2782			status = "disabled";
2783		};
2784
2785		usb_1_hsphy: phy@88e3000 {
2786			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
2787			reg = <0 0x088e3000 0 0x400>;
2788			status = "disabled";
2789			#phy-cells = <0>;
2790			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2791				 <&rpmhcc RPMH_CXO_CLK>;
2792			clock-names = "cfg_ahb", "ref";
2793			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2794
2795			nvmem-cells = <&qusb2p_hstx_trim>;
2796		};
2797
2798		usb_1_qmpphy: phy-wrapper@88e9000 {
2799			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
2800			reg = <0 0x088e9000 0 0x18c>,
2801			      <0 0x088e8000 0 0x3c>,
2802			      <0 0x088ea000 0 0x18c>;
2803			status = "disabled";
2804			#address-cells = <2>;
2805			#size-cells = <2>;
2806			ranges;
2807
2808			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2809				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2810				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
2811				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2812			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
2813
2814			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
2815				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
2816			reset-names = "phy", "common";
2817
2818			usb_1_ssphy: usb3-phy@88e9200 {
2819				reg = <0 0x088e9200 0 0x128>,
2820				      <0 0x088e9400 0 0x200>,
2821				      <0 0x088e9c00 0 0x218>,
2822				      <0 0x088e9600 0 0x128>,
2823				      <0 0x088e9800 0 0x200>,
2824				      <0 0x088e9a00 0 0x18>;
2825				#clock-cells = <0>;
2826				#phy-cells = <0>;
2827				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2828				clock-names = "pipe0";
2829				clock-output-names = "usb3_phy_pipe_clk_src";
2830			};
2831
2832			dp_phy: dp-phy@88ea200 {
2833				reg = <0 0x088ea200 0 0x200>,
2834				      <0 0x088ea400 0 0x200>,
2835				      <0 0x088eaa00 0 0x200>,
2836				      <0 0x088ea600 0 0x200>,
2837				      <0 0x088ea800 0 0x200>;
2838				#clock-cells = <1>;
2839				#phy-cells = <0>;
2840			};
2841		};
2842
2843		pmu@90b6300 {
2844			compatible = "qcom,sc7180-cpu-bwmon", "qcom,sdm845-bwmon";
2845			reg = <0 0x090b6300 0 0x600>;
2846			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
2847
2848			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
2849					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
2850			operating-points-v2 = <&cpu_bwmon_opp_table>;
2851
2852			cpu_bwmon_opp_table: opp-table {
2853				compatible = "operating-points-v2";
2854
2855				opp-0 {
2856					opp-peak-kBps = <2288000>;
2857				};
2858
2859				opp-1 {
2860					opp-peak-kBps = <4577000>;
2861				};
2862
2863				opp-2 {
2864					opp-peak-kBps = <7110000>;
2865				};
2866
2867				opp-3 {
2868					opp-peak-kBps = <9155000>;
2869				};
2870
2871				opp-4 {
2872					opp-peak-kBps = <12298000>;
2873				};
2874
2875				opp-5 {
2876					opp-peak-kBps = <14236000>;
2877				};
2878			};
2879		};
2880
2881		pmu@90cd000 {
2882			compatible = "qcom,sc7180-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
2883			reg = <0 0x090cd000 0 0x1000>;
2884			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
2885
2886			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
2887					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
2888			operating-points-v2 = <&llcc_bwmon_opp_table>;
2889
2890			llcc_bwmon_opp_table: opp-table {
2891				compatible = "operating-points-v2";
2892
2893				opp-0 {
2894					opp-peak-kBps = <1144000>;
2895				};
2896
2897				opp-1 {
2898					opp-peak-kBps = <1720000>;
2899				};
2900
2901				opp-2 {
2902					opp-peak-kBps = <2086000>;
2903				};
2904
2905				opp-3 {
2906					opp-peak-kBps = <2929000>;
2907				};
2908
2909				opp-4 {
2910					opp-peak-kBps = <3879000>;
2911				};
2912
2913				opp-5 {
2914					opp-peak-kBps = <5931000>;
2915				};
2916
2917				opp-6 {
2918					opp-peak-kBps = <6881000>;
2919				};
2920
2921				opp-7 {
2922					opp-peak-kBps = <8137000>;
2923				};
2924			};
2925		};
2926
2927		dc_noc: interconnect@9160000 {
2928			compatible = "qcom,sc7180-dc-noc";
2929			reg = <0 0x09160000 0 0x03200>;
2930			#interconnect-cells = <2>;
2931			qcom,bcm-voters = <&apps_bcm_voter>;
2932		};
2933
2934		system-cache-controller@9200000 {
2935			compatible = "qcom,sc7180-llcc";
2936			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
2937			reg-names = "llcc0_base", "llcc_broadcast_base";
2938			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
2939		};
2940
2941		gem_noc: interconnect@9680000 {
2942			compatible = "qcom,sc7180-gem-noc";
2943			reg = <0 0x09680000 0 0x3e200>;
2944			#interconnect-cells = <2>;
2945			qcom,bcm-voters = <&apps_bcm_voter>;
2946		};
2947
2948		npu_noc: interconnect@9990000 {
2949			compatible = "qcom,sc7180-npu-noc";
2950			reg = <0 0x09990000 0 0x1600>;
2951			#interconnect-cells = <2>;
2952			qcom,bcm-voters = <&apps_bcm_voter>;
2953		};
2954
2955		usb_1: usb@a6f8800 {
2956			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
2957			reg = <0 0x0a6f8800 0 0x400>;
2958			status = "disabled";
2959			#address-cells = <2>;
2960			#size-cells = <2>;
2961			ranges;
2962			dma-ranges;
2963
2964			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2965				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2966				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2967				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2968				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
2969			clock-names = "cfg_noc",
2970				      "core",
2971				      "iface",
2972				      "sleep",
2973				      "mock_utmi";
2974
2975			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2976					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2977			assigned-clock-rates = <19200000>, <150000000>;
2978
2979			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
2980					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
2981					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
2982					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
2983			interrupt-names = "hs_phy_irq", "ss_phy_irq",
2984					  "dm_hs_phy_irq", "dp_hs_phy_irq";
2985
2986			power-domains = <&gcc USB30_PRIM_GDSC>;
2987			required-opps = <&rpmhpd_opp_nom>;
2988
2989			resets = <&gcc GCC_USB30_PRIM_BCR>;
2990
2991			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
2992					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
2993			interconnect-names = "usb-ddr", "apps-usb";
2994
2995			wakeup-source;
2996
2997			usb_1_dwc3: usb@a600000 {
2998				compatible = "snps,dwc3";
2999				reg = <0 0x0a600000 0 0xe000>;
3000				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3001				iommus = <&apps_smmu 0x540 0>;
3002				snps,dis_u2_susphy_quirk;
3003				snps,dis_enblslpm_quirk;
3004				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
3005				phy-names = "usb2-phy", "usb3-phy";
3006				maximum-speed = "super-speed";
3007			};
3008		};
3009
3010		venus: video-codec@aa00000 {
3011			compatible = "qcom,sc7180-venus";
3012			reg = <0 0x0aa00000 0 0xff000>;
3013			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
3014			power-domains = <&videocc VENUS_GDSC>,
3015					<&videocc VCODEC0_GDSC>,
3016					<&rpmhpd SC7180_CX>;
3017			power-domain-names = "venus", "vcodec0", "cx";
3018			operating-points-v2 = <&venus_opp_table>;
3019			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
3020				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
3021				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
3022				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
3023				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
3024			clock-names = "core", "iface", "bus",
3025				      "vcodec0_core", "vcodec0_bus";
3026			iommus = <&apps_smmu 0x0c00 0x60>;
3027			memory-region = <&venus_mem>;
3028			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
3029					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
3030			interconnect-names = "video-mem", "cpu-cfg";
3031
3032			video-decoder {
3033				compatible = "venus-decoder";
3034			};
3035
3036			video-encoder {
3037				compatible = "venus-encoder";
3038			};
3039
3040			venus_opp_table: opp-table {
3041				compatible = "operating-points-v2";
3042
3043				opp-150000000 {
3044					opp-hz = /bits/ 64 <150000000>;
3045					required-opps = <&rpmhpd_opp_low_svs>;
3046				};
3047
3048				opp-270000000 {
3049					opp-hz = /bits/ 64 <270000000>;
3050					required-opps = <&rpmhpd_opp_svs>;
3051				};
3052
3053				opp-340000000 {
3054					opp-hz = /bits/ 64 <340000000>;
3055					required-opps = <&rpmhpd_opp_svs_l1>;
3056				};
3057
3058				opp-434000000 {
3059					opp-hz = /bits/ 64 <434000000>;
3060					required-opps = <&rpmhpd_opp_nom>;
3061				};
3062
3063				opp-500000097 {
3064					opp-hz = /bits/ 64 <500000097>;
3065					required-opps = <&rpmhpd_opp_turbo>;
3066				};
3067			};
3068		};
3069
3070		videocc: clock-controller@ab00000 {
3071			compatible = "qcom,sc7180-videocc";
3072			reg = <0 0x0ab00000 0 0x10000>;
3073			clocks = <&rpmhcc RPMH_CXO_CLK>;
3074			clock-names = "bi_tcxo";
3075			#clock-cells = <1>;
3076			#reset-cells = <1>;
3077			#power-domain-cells = <1>;
3078		};
3079
3080		camnoc_virt: interconnect@ac00000 {
3081			compatible = "qcom,sc7180-camnoc-virt";
3082			reg = <0 0x0ac00000 0 0x1000>;
3083			#interconnect-cells = <2>;
3084			qcom,bcm-voters = <&apps_bcm_voter>;
3085		};
3086
3087		camcc: clock-controller@ad00000 {
3088			compatible = "qcom,sc7180-camcc";
3089			reg = <0 0x0ad00000 0 0x10000>;
3090			clocks = <&rpmhcc RPMH_CXO_CLK>,
3091			       <&gcc GCC_CAMERA_AHB_CLK>,
3092			       <&gcc GCC_CAMERA_XO_CLK>;
3093			clock-names = "bi_tcxo", "iface", "xo";
3094			#clock-cells = <1>;
3095			#reset-cells = <1>;
3096			#power-domain-cells = <1>;
3097		};
3098
3099		mdss: display-subsystem@ae00000 {
3100			compatible = "qcom,sc7180-mdss";
3101			reg = <0 0x0ae00000 0 0x1000>;
3102			reg-names = "mdss";
3103
3104			power-domains = <&dispcc MDSS_GDSC>;
3105
3106			clocks = <&gcc GCC_DISP_AHB_CLK>,
3107				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3108				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
3109			clock-names = "iface", "ahb", "core";
3110
3111			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
3112			interrupt-controller;
3113			#interrupt-cells = <1>;
3114
3115			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
3116			interconnect-names = "mdp0-mem";
3117
3118			iommus = <&apps_smmu 0x800 0x2>;
3119
3120			#address-cells = <2>;
3121			#size-cells = <2>;
3122			ranges;
3123
3124			status = "disabled";
3125
3126			mdp: display-controller@ae01000 {
3127				compatible = "qcom,sc7180-dpu";
3128				reg = <0 0x0ae01000 0 0x8f000>,
3129				      <0 0x0aeb0000 0 0x2008>;
3130				reg-names = "mdp", "vbif";
3131
3132				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
3133					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3134					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
3135					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
3136					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
3137					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3138				clock-names = "bus", "iface", "rot", "lut", "core",
3139					      "vsync";
3140				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
3141						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
3142						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
3143				assigned-clock-rates = <19200000>,
3144						       <19200000>,
3145						       <19200000>;
3146				operating-points-v2 = <&mdp_opp_table>;
3147				power-domains = <&rpmhpd SC7180_CX>;
3148
3149				interrupt-parent = <&mdss>;
3150				interrupts = <0>;
3151
3152				ports {
3153					#address-cells = <1>;
3154					#size-cells = <0>;
3155
3156					port@0 {
3157						reg = <0>;
3158						dpu_intf1_out: endpoint {
3159							remote-endpoint = <&mdss_dsi0_in>;
3160						};
3161					};
3162
3163					port@2 {
3164						reg = <2>;
3165						dpu_intf0_out: endpoint {
3166							remote-endpoint = <&dp_in>;
3167						};
3168					};
3169				};
3170
3171				mdp_opp_table: opp-table {
3172					compatible = "operating-points-v2";
3173
3174					opp-200000000 {
3175						opp-hz = /bits/ 64 <200000000>;
3176						required-opps = <&rpmhpd_opp_low_svs>;
3177					};
3178
3179					opp-300000000 {
3180						opp-hz = /bits/ 64 <300000000>;
3181						required-opps = <&rpmhpd_opp_svs>;
3182					};
3183
3184					opp-345000000 {
3185						opp-hz = /bits/ 64 <345000000>;
3186						required-opps = <&rpmhpd_opp_svs_l1>;
3187					};
3188
3189					opp-460000000 {
3190						opp-hz = /bits/ 64 <460000000>;
3191						required-opps = <&rpmhpd_opp_nom>;
3192					};
3193				};
3194			};
3195
3196			mdss_dsi0: dsi@ae94000 {
3197				compatible = "qcom,sc7180-dsi-ctrl",
3198					     "qcom,mdss-dsi-ctrl";
3199				reg = <0 0x0ae94000 0 0x400>;
3200				reg-names = "dsi_ctrl";
3201
3202				interrupt-parent = <&mdss>;
3203				interrupts = <4>;
3204
3205				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3206					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3207					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3208					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3209					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
3210					 <&gcc GCC_DISP_HF_AXI_CLK>;
3211				clock-names = "byte",
3212					      "byte_intf",
3213					      "pixel",
3214					      "core",
3215					      "iface",
3216					      "bus";
3217
3218				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3219				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
3220
3221				operating-points-v2 = <&dsi_opp_table>;
3222				power-domains = <&rpmhpd SC7180_CX>;
3223
3224				phys = <&mdss_dsi0_phy>;
3225
3226				#address-cells = <1>;
3227				#size-cells = <0>;
3228
3229				status = "disabled";
3230
3231				ports {
3232					#address-cells = <1>;
3233					#size-cells = <0>;
3234
3235					port@0 {
3236						reg = <0>;
3237						mdss_dsi0_in: endpoint {
3238							remote-endpoint = <&dpu_intf1_out>;
3239						};
3240					};
3241
3242					port@1 {
3243						reg = <1>;
3244						mdss_dsi0_out: endpoint {
3245						};
3246					};
3247				};
3248
3249				dsi_opp_table: opp-table {
3250					compatible = "operating-points-v2";
3251
3252					opp-187500000 {
3253						opp-hz = /bits/ 64 <187500000>;
3254						required-opps = <&rpmhpd_opp_low_svs>;
3255					};
3256
3257					opp-300000000 {
3258						opp-hz = /bits/ 64 <300000000>;
3259						required-opps = <&rpmhpd_opp_svs>;
3260					};
3261
3262					opp-358000000 {
3263						opp-hz = /bits/ 64 <358000000>;
3264						required-opps = <&rpmhpd_opp_svs_l1>;
3265					};
3266				};
3267			};
3268
3269			mdss_dsi0_phy: phy@ae94400 {
3270				compatible = "qcom,dsi-phy-10nm";
3271				reg = <0 0x0ae94400 0 0x200>,
3272				      <0 0x0ae94600 0 0x280>,
3273				      <0 0x0ae94a00 0 0x1e0>;
3274				reg-names = "dsi_phy",
3275					    "dsi_phy_lane",
3276					    "dsi_pll";
3277
3278				#clock-cells = <1>;
3279				#phy-cells = <0>;
3280
3281				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3282					 <&rpmhcc RPMH_CXO_CLK>;
3283				clock-names = "iface", "ref";
3284
3285				status = "disabled";
3286			};
3287
3288			mdss_dp: displayport-controller@ae90000 {
3289				compatible = "qcom,sc7180-dp";
3290				status = "disabled";
3291
3292				reg = <0 0x0ae90000 0 0x200>,
3293				      <0 0x0ae90200 0 0x200>,
3294				      <0 0x0ae90400 0 0xc00>,
3295				      <0 0x0ae91000 0 0x400>,
3296				      <0 0x0ae91400 0 0x400>;
3297
3298				interrupt-parent = <&mdss>;
3299				interrupts = <12>;
3300
3301				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3302					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
3303					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
3304					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
3305					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
3306				clock-names = "core_iface", "core_aux", "ctrl_link",
3307					      "ctrl_link_iface", "stream_pixel";
3308				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
3309						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
3310				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
3311				phys = <&dp_phy>;
3312				phy-names = "dp";
3313
3314				operating-points-v2 = <&dp_opp_table>;
3315				power-domains = <&rpmhpd SC7180_CX>;
3316
3317				#sound-dai-cells = <0>;
3318
3319				ports {
3320					#address-cells = <1>;
3321					#size-cells = <0>;
3322					port@0 {
3323						reg = <0>;
3324						dp_in: endpoint {
3325							remote-endpoint = <&dpu_intf0_out>;
3326						};
3327					};
3328
3329					port@1 {
3330						reg = <1>;
3331						mdss_dp_out: endpoint { };
3332					};
3333				};
3334
3335				dp_opp_table: opp-table {
3336					compatible = "operating-points-v2";
3337
3338					opp-160000000 {
3339						opp-hz = /bits/ 64 <160000000>;
3340						required-opps = <&rpmhpd_opp_low_svs>;
3341					};
3342
3343					opp-270000000 {
3344						opp-hz = /bits/ 64 <270000000>;
3345						required-opps = <&rpmhpd_opp_svs>;
3346					};
3347
3348					opp-540000000 {
3349						opp-hz = /bits/ 64 <540000000>;
3350						required-opps = <&rpmhpd_opp_svs_l1>;
3351					};
3352
3353					opp-810000000 {
3354						opp-hz = /bits/ 64 <810000000>;
3355						required-opps = <&rpmhpd_opp_nom>;
3356					};
3357				};
3358			};
3359		};
3360
3361		dispcc: clock-controller@af00000 {
3362			compatible = "qcom,sc7180-dispcc";
3363			reg = <0 0x0af00000 0 0x200000>;
3364			clocks = <&rpmhcc RPMH_CXO_CLK>,
3365				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
3366				 <&mdss_dsi0_phy 0>,
3367				 <&mdss_dsi0_phy 1>,
3368				 <&dp_phy 0>,
3369				 <&dp_phy 1>;
3370			clock-names = "bi_tcxo",
3371				      "gcc_disp_gpll0_clk_src",
3372				      "dsi0_phy_pll_out_byteclk",
3373				      "dsi0_phy_pll_out_dsiclk",
3374				      "dp_phy_pll_link_clk",
3375				      "dp_phy_pll_vco_div_clk";
3376			#clock-cells = <1>;
3377			#reset-cells = <1>;
3378			#power-domain-cells = <1>;
3379		};
3380
3381		pdc: interrupt-controller@b220000 {
3382			compatible = "qcom,sc7180-pdc", "qcom,pdc";
3383			reg = <0 0x0b220000 0 0x30000>;
3384			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
3385			#interrupt-cells = <2>;
3386			interrupt-parent = <&intc>;
3387			interrupt-controller;
3388		};
3389
3390		pdc_reset: reset-controller@b2e0000 {
3391			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
3392			reg = <0 0x0b2e0000 0 0x20000>;
3393			#reset-cells = <1>;
3394		};
3395
3396		tsens0: thermal-sensor@c263000 {
3397			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
3398			reg = <0 0x0c263000 0 0x1ff>, /* TM */
3399				<0 0x0c222000 0 0x1ff>; /* SROT */
3400			#qcom,sensors = <15>;
3401			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3402				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3403			interrupt-names = "uplow","critical";
3404			#thermal-sensor-cells = <1>;
3405		};
3406
3407		tsens1: thermal-sensor@c265000 {
3408			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
3409			reg = <0 0x0c265000 0 0x1ff>, /* TM */
3410				<0 0x0c223000 0 0x1ff>; /* SROT */
3411			#qcom,sensors = <10>;
3412			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3413				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3414			interrupt-names = "uplow","critical";
3415			#thermal-sensor-cells = <1>;
3416		};
3417
3418		aoss_reset: reset-controller@c2a0000 {
3419			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
3420			reg = <0 0x0c2a0000 0 0x31000>;
3421			#reset-cells = <1>;
3422		};
3423
3424		aoss_qmp: power-management@c300000 {
3425			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
3426			reg = <0 0x0c300000 0 0x400>;
3427			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
3428			mboxes = <&apss_shared 0>;
3429
3430			#clock-cells = <0>;
3431		};
3432
3433		sram@c3f0000 {
3434			compatible = "qcom,rpmh-stats";
3435			reg = <0 0x0c3f0000 0 0x400>;
3436		};
3437
3438		spmi_bus: spmi@c440000 {
3439			compatible = "qcom,spmi-pmic-arb";
3440			reg = <0 0x0c440000 0 0x1100>,
3441			      <0 0x0c600000 0 0x2000000>,
3442			      <0 0x0e600000 0 0x100000>,
3443			      <0 0x0e700000 0 0xa0000>,
3444			      <0 0x0c40a000 0 0x26000>;
3445			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3446			interrupt-names = "periph_irq";
3447			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3448			qcom,ee = <0>;
3449			qcom,channel = <0>;
3450			#address-cells = <2>;
3451			#size-cells = <0>;
3452			interrupt-controller;
3453			#interrupt-cells = <4>;
3454		};
3455
3456		sram@146aa000 {
3457			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
3458			reg = <0 0x146aa000 0 0x2000>;
3459
3460			#address-cells = <1>;
3461			#size-cells = <1>;
3462
3463			ranges = <0 0 0x146aa000 0x2000>;
3464
3465			pil-reloc@94c {
3466				compatible = "qcom,pil-reloc-info";
3467				reg = <0x94c 0xc8>;
3468			};
3469		};
3470
3471		apps_smmu: iommu@15000000 {
3472			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
3473			reg = <0 0x15000000 0 0x100000>;
3474			#iommu-cells = <2>;
3475			#global-interrupts = <1>;
3476			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3477				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
3478				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
3479				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
3480				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3481				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3482				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3483				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3484				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3485				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3486				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3487				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3488				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3489				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3490				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3491				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3492				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3493				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3494				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3495				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3496				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3497				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3498				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3499				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3500				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3501				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3502				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3503				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3504				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3505				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3506				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3507				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3508				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3509				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3510				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3511				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3512				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3513				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3514				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3515				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3516				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3517				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3518				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3519				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3520				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3521				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3522				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3523				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3524				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3525				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3526				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3527				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3528				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3529				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3530				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3531				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3532				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3533				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3534				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3535				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3536				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3537				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3538				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3539				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3540				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3541				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3542				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3543				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3544				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3545				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3546				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3547				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3548				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3549				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3550				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3551				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3552				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3553				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3554				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
3555				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
3556				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
3557		};
3558
3559		intc: interrupt-controller@17a00000 {
3560			compatible = "arm,gic-v3";
3561			#address-cells = <2>;
3562			#size-cells = <2>;
3563			ranges;
3564			#interrupt-cells = <3>;
3565			interrupt-controller;
3566			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
3567			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
3568			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3569
3570			msi-controller@17a40000 {
3571				compatible = "arm,gic-v3-its";
3572				msi-controller;
3573				#msi-cells = <1>;
3574				reg = <0 0x17a40000 0 0x20000>;
3575				status = "disabled";
3576			};
3577		};
3578
3579		apss_shared: mailbox@17c00000 {
3580			compatible = "qcom,sc7180-apss-shared",
3581				     "qcom,sdm845-apss-shared";
3582			reg = <0 0x17c00000 0 0x10000>;
3583			#mbox-cells = <1>;
3584		};
3585
3586		watchdog@17c10000 {
3587			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
3588			reg = <0 0x17c10000 0 0x1000>;
3589			clocks = <&sleep_clk>;
3590			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
3591		};
3592
3593		timer@17c20000 {
3594			#address-cells = <1>;
3595			#size-cells = <1>;
3596			ranges = <0 0 0 0x20000000>;
3597			compatible = "arm,armv7-timer-mem";
3598			reg = <0 0x17c20000 0 0x1000>;
3599
3600			frame@17c21000 {
3601				frame-number = <0>;
3602				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3603					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3604				reg = <0x17c21000 0x1000>,
3605				      <0x17c22000 0x1000>;
3606			};
3607
3608			frame@17c23000 {
3609				frame-number = <1>;
3610				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3611				reg = <0x17c23000 0x1000>;
3612				status = "disabled";
3613			};
3614
3615			frame@17c25000 {
3616				frame-number = <2>;
3617				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3618				reg = <0x17c25000 0x1000>;
3619				status = "disabled";
3620			};
3621
3622			frame@17c27000 {
3623				frame-number = <3>;
3624				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3625				reg = <0x17c27000 0x1000>;
3626				status = "disabled";
3627			};
3628
3629			frame@17c29000 {
3630				frame-number = <4>;
3631				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3632				reg = <0x17c29000 0x1000>;
3633				status = "disabled";
3634			};
3635
3636			frame@17c2b000 {
3637				frame-number = <5>;
3638				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3639				reg = <0x17c2b000 0x1000>;
3640				status = "disabled";
3641			};
3642
3643			frame@17c2d000 {
3644				frame-number = <6>;
3645				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3646				reg = <0x17c2d000 0x1000>;
3647				status = "disabled";
3648			};
3649		};
3650
3651		apps_rsc: rsc@18200000 {
3652			compatible = "qcom,rpmh-rsc";
3653			reg = <0 0x18200000 0 0x10000>,
3654			      <0 0x18210000 0 0x10000>,
3655			      <0 0x18220000 0 0x10000>;
3656			reg-names = "drv-0", "drv-1", "drv-2";
3657			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3658				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3659				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3660			qcom,tcs-offset = <0xd00>;
3661			qcom,drv-id = <2>;
3662			qcom,tcs-config = <ACTIVE_TCS  2>,
3663					  <SLEEP_TCS   3>,
3664					  <WAKE_TCS    3>,
3665					  <CONTROL_TCS 1>;
3666			power-domains = <&CLUSTER_PD>;
3667
3668			rpmhcc: clock-controller {
3669				compatible = "qcom,sc7180-rpmh-clk";
3670				clocks = <&xo_board>;
3671				clock-names = "xo";
3672				#clock-cells = <1>;
3673			};
3674
3675			rpmhpd: power-controller {
3676				compatible = "qcom,sc7180-rpmhpd";
3677				#power-domain-cells = <1>;
3678				operating-points-v2 = <&rpmhpd_opp_table>;
3679
3680				rpmhpd_opp_table: opp-table {
3681					compatible = "operating-points-v2";
3682
3683					rpmhpd_opp_ret: opp1 {
3684						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3685					};
3686
3687					rpmhpd_opp_min_svs: opp2 {
3688						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3689					};
3690
3691					rpmhpd_opp_low_svs: opp3 {
3692						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3693					};
3694
3695					rpmhpd_opp_svs: opp4 {
3696						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3697					};
3698
3699					rpmhpd_opp_svs_l1: opp5 {
3700						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3701					};
3702
3703					rpmhpd_opp_svs_l2: opp6 {
3704						opp-level = <224>;
3705					};
3706
3707					rpmhpd_opp_nom: opp7 {
3708						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3709					};
3710
3711					rpmhpd_opp_nom_l1: opp8 {
3712						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3713					};
3714
3715					rpmhpd_opp_nom_l2: opp9 {
3716						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3717					};
3718
3719					rpmhpd_opp_turbo: opp10 {
3720						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3721					};
3722
3723					rpmhpd_opp_turbo_l1: opp11 {
3724						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3725					};
3726				};
3727			};
3728
3729			apps_bcm_voter: bcm-voter {
3730				compatible = "qcom,bcm-voter";
3731			};
3732		};
3733
3734		osm_l3: interconnect@18321000 {
3735			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
3736			reg = <0 0x18321000 0 0x1400>;
3737
3738			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3739			clock-names = "xo", "alternate";
3740
3741			#interconnect-cells = <1>;
3742		};
3743
3744		cpufreq_hw: cpufreq@18323000 {
3745			compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw";
3746			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
3747			reg-names = "freq-domain0", "freq-domain1";
3748
3749			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3750			clock-names = "xo", "alternate";
3751
3752			#freq-domain-cells = <1>;
3753			#clock-cells = <1>;
3754		};
3755
3756		wifi: wifi@18800000 {
3757			compatible = "qcom,wcn3990-wifi";
3758			reg = <0 0x18800000 0 0x800000>;
3759			reg-names = "membase";
3760			iommus = <&apps_smmu 0xc0 0x1>;
3761			interrupts =
3762				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
3763				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
3764				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
3765				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
3766				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
3767				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
3768				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
3769				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
3770				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
3771				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
3772				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
3773				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
3774			memory-region = <&wlan_mem>;
3775			qcom,msa-fixed-perm;
3776			status = "disabled";
3777		};
3778
3779		lpasscc: clock-controller@62d00000 {
3780			compatible = "qcom,sc7180-lpasscorecc";
3781			reg = <0 0x62d00000 0 0x50000>,
3782			      <0 0x62780000 0 0x30000>;
3783			reg-names = "lpass_core_cc", "lpass_audio_cc";
3784			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3785				 <&rpmhcc RPMH_CXO_CLK>;
3786			clock-names = "iface", "bi_tcxo";
3787			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
3788			#clock-cells = <1>;
3789			#power-domain-cells = <1>;
3790
3791			status = "reserved"; /* Controlled by ADSP */
3792		};
3793
3794		lpass_cpu: lpass@62d87000 {
3795			compatible = "qcom,sc7180-lpass-cpu";
3796
3797			reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
3798			reg-names = "lpass-hdmiif", "lpass-lpaif";
3799
3800			iommus = <&apps_smmu 0x1020 0>,
3801				<&apps_smmu 0x1021 0>,
3802				<&apps_smmu 0x1032 0>;
3803
3804			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
3805			required-opps = <&rpmhpd_opp_nom>;
3806
3807			status = "disabled";
3808
3809			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3810				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
3811				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
3812				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
3813				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
3814				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
3815
3816			clock-names = "pcnoc-sway-clk", "audio-core",
3817					"mclk0", "pcnoc-mport-clk",
3818					"mi2s-bit-clk0", "mi2s-bit-clk1";
3819
3820
3821			#sound-dai-cells = <1>;
3822			#address-cells = <1>;
3823			#size-cells = <0>;
3824
3825			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
3826					<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
3827			interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
3828		};
3829
3830		lpass_hm: clock-controller@63000000 {
3831			compatible = "qcom,sc7180-lpasshm";
3832			reg = <0 0x63000000 0 0x28>;
3833			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
3834				 <&rpmhcc RPMH_CXO_CLK>;
3835			clock-names = "iface", "bi_tcxo";
3836			power-domains = <&rpmhpd SC7180_CX>;
3837
3838			#clock-cells = <1>;
3839			#power-domain-cells = <1>;
3840
3841			status = "reserved"; /* Controlled by ADSP */
3842		};
3843	};
3844
3845	thermal-zones {
3846		cpu0_thermal: cpu0-thermal {
3847			polling-delay-passive = <250>;
3848			polling-delay = <0>;
3849
3850			thermal-sensors = <&tsens0 1>;
3851			sustainable-power = <1052>;
3852
3853			trips {
3854				cpu0_alert0: trip-point0 {
3855					temperature = <90000>;
3856					hysteresis = <2000>;
3857					type = "passive";
3858				};
3859
3860				cpu0_alert1: trip-point1 {
3861					temperature = <95000>;
3862					hysteresis = <2000>;
3863					type = "passive";
3864				};
3865
3866				cpu0_crit: cpu-crit {
3867					temperature = <110000>;
3868					hysteresis = <1000>;
3869					type = "critical";
3870				};
3871			};
3872
3873			cooling-maps {
3874				map0 {
3875					trip = <&cpu0_alert0>;
3876					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3877							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3878							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3879							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3880							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3881							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3882				};
3883				map1 {
3884					trip = <&cpu0_alert1>;
3885					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3886							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3887							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3888							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3889							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3890							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3891				};
3892			};
3893		};
3894
3895		cpu1_thermal: cpu1-thermal {
3896			polling-delay-passive = <250>;
3897			polling-delay = <0>;
3898
3899			thermal-sensors = <&tsens0 2>;
3900			sustainable-power = <1052>;
3901
3902			trips {
3903				cpu1_alert0: trip-point0 {
3904					temperature = <90000>;
3905					hysteresis = <2000>;
3906					type = "passive";
3907				};
3908
3909				cpu1_alert1: trip-point1 {
3910					temperature = <95000>;
3911					hysteresis = <2000>;
3912					type = "passive";
3913				};
3914
3915				cpu1_crit: cpu-crit {
3916					temperature = <110000>;
3917					hysteresis = <1000>;
3918					type = "critical";
3919				};
3920			};
3921
3922			cooling-maps {
3923				map0 {
3924					trip = <&cpu1_alert0>;
3925					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3926							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3927							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3928							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3929							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3930							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3931				};
3932				map1 {
3933					trip = <&cpu1_alert1>;
3934					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3935							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3936							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3937							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3938							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3939							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3940				};
3941			};
3942		};
3943
3944		cpu2_thermal: cpu2-thermal {
3945			polling-delay-passive = <250>;
3946			polling-delay = <0>;
3947
3948			thermal-sensors = <&tsens0 3>;
3949			sustainable-power = <1052>;
3950
3951			trips {
3952				cpu2_alert0: trip-point0 {
3953					temperature = <90000>;
3954					hysteresis = <2000>;
3955					type = "passive";
3956				};
3957
3958				cpu2_alert1: trip-point1 {
3959					temperature = <95000>;
3960					hysteresis = <2000>;
3961					type = "passive";
3962				};
3963
3964				cpu2_crit: cpu-crit {
3965					temperature = <110000>;
3966					hysteresis = <1000>;
3967					type = "critical";
3968				};
3969			};
3970
3971			cooling-maps {
3972				map0 {
3973					trip = <&cpu2_alert0>;
3974					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3975							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3976							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3977							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3978							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3979							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3980				};
3981				map1 {
3982					trip = <&cpu2_alert1>;
3983					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3984							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3985							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3986							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3987							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3988							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3989				};
3990			};
3991		};
3992
3993		cpu3_thermal: cpu3-thermal {
3994			polling-delay-passive = <250>;
3995			polling-delay = <0>;
3996
3997			thermal-sensors = <&tsens0 4>;
3998			sustainable-power = <1052>;
3999
4000			trips {
4001				cpu3_alert0: trip-point0 {
4002					temperature = <90000>;
4003					hysteresis = <2000>;
4004					type = "passive";
4005				};
4006
4007				cpu3_alert1: trip-point1 {
4008					temperature = <95000>;
4009					hysteresis = <2000>;
4010					type = "passive";
4011				};
4012
4013				cpu3_crit: cpu-crit {
4014					temperature = <110000>;
4015					hysteresis = <1000>;
4016					type = "critical";
4017				};
4018			};
4019
4020			cooling-maps {
4021				map0 {
4022					trip = <&cpu3_alert0>;
4023					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4024							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4025							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4026							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4027							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4028							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4029				};
4030				map1 {
4031					trip = <&cpu3_alert1>;
4032					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4033							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4034							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4035							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4036							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4037							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4038				};
4039			};
4040		};
4041
4042		cpu4_thermal: cpu4-thermal {
4043			polling-delay-passive = <250>;
4044			polling-delay = <0>;
4045
4046			thermal-sensors = <&tsens0 5>;
4047			sustainable-power = <1052>;
4048
4049			trips {
4050				cpu4_alert0: trip-point0 {
4051					temperature = <90000>;
4052					hysteresis = <2000>;
4053					type = "passive";
4054				};
4055
4056				cpu4_alert1: trip-point1 {
4057					temperature = <95000>;
4058					hysteresis = <2000>;
4059					type = "passive";
4060				};
4061
4062				cpu4_crit: cpu-crit {
4063					temperature = <110000>;
4064					hysteresis = <1000>;
4065					type = "critical";
4066				};
4067			};
4068
4069			cooling-maps {
4070				map0 {
4071					trip = <&cpu4_alert0>;
4072					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4073							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4074							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4075							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4076							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4077							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4078				};
4079				map1 {
4080					trip = <&cpu4_alert1>;
4081					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4082							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4083							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4084							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4085							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4086							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4087				};
4088			};
4089		};
4090
4091		cpu5_thermal: cpu5-thermal {
4092			polling-delay-passive = <250>;
4093			polling-delay = <0>;
4094
4095			thermal-sensors = <&tsens0 6>;
4096			sustainable-power = <1052>;
4097
4098			trips {
4099				cpu5_alert0: trip-point0 {
4100					temperature = <90000>;
4101					hysteresis = <2000>;
4102					type = "passive";
4103				};
4104
4105				cpu5_alert1: trip-point1 {
4106					temperature = <95000>;
4107					hysteresis = <2000>;
4108					type = "passive";
4109				};
4110
4111				cpu5_crit: cpu-crit {
4112					temperature = <110000>;
4113					hysteresis = <1000>;
4114					type = "critical";
4115				};
4116			};
4117
4118			cooling-maps {
4119				map0 {
4120					trip = <&cpu5_alert0>;
4121					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4122							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4123							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4124							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4125							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4126							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4127				};
4128				map1 {
4129					trip = <&cpu5_alert1>;
4130					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4131							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4132							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4133							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4134							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4135							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4136				};
4137			};
4138		};
4139
4140		cpu6_thermal: cpu6-thermal {
4141			polling-delay-passive = <250>;
4142			polling-delay = <0>;
4143
4144			thermal-sensors = <&tsens0 9>;
4145			sustainable-power = <1425>;
4146
4147			trips {
4148				cpu6_alert0: trip-point0 {
4149					temperature = <90000>;
4150					hysteresis = <2000>;
4151					type = "passive";
4152				};
4153
4154				cpu6_alert1: trip-point1 {
4155					temperature = <95000>;
4156					hysteresis = <2000>;
4157					type = "passive";
4158				};
4159
4160				cpu6_crit: cpu-crit {
4161					temperature = <110000>;
4162					hysteresis = <1000>;
4163					type = "critical";
4164				};
4165			};
4166
4167			cooling-maps {
4168				map0 {
4169					trip = <&cpu6_alert0>;
4170					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4171							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4172				};
4173				map1 {
4174					trip = <&cpu6_alert1>;
4175					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4176							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4177				};
4178			};
4179		};
4180
4181		cpu7_thermal: cpu7-thermal {
4182			polling-delay-passive = <250>;
4183			polling-delay = <0>;
4184
4185			thermal-sensors = <&tsens0 10>;
4186			sustainable-power = <1425>;
4187
4188			trips {
4189				cpu7_alert0: trip-point0 {
4190					temperature = <90000>;
4191					hysteresis = <2000>;
4192					type = "passive";
4193				};
4194
4195				cpu7_alert1: trip-point1 {
4196					temperature = <95000>;
4197					hysteresis = <2000>;
4198					type = "passive";
4199				};
4200
4201				cpu7_crit: cpu-crit {
4202					temperature = <110000>;
4203					hysteresis = <1000>;
4204					type = "critical";
4205				};
4206			};
4207
4208			cooling-maps {
4209				map0 {
4210					trip = <&cpu7_alert0>;
4211					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4212							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4213				};
4214				map1 {
4215					trip = <&cpu7_alert1>;
4216					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4217							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4218				};
4219			};
4220		};
4221
4222		cpu8_thermal: cpu8-thermal {
4223			polling-delay-passive = <250>;
4224			polling-delay = <0>;
4225
4226			thermal-sensors = <&tsens0 11>;
4227			sustainable-power = <1425>;
4228
4229			trips {
4230				cpu8_alert0: trip-point0 {
4231					temperature = <90000>;
4232					hysteresis = <2000>;
4233					type = "passive";
4234				};
4235
4236				cpu8_alert1: trip-point1 {
4237					temperature = <95000>;
4238					hysteresis = <2000>;
4239					type = "passive";
4240				};
4241
4242				cpu8_crit: cpu-crit {
4243					temperature = <110000>;
4244					hysteresis = <1000>;
4245					type = "critical";
4246				};
4247			};
4248
4249			cooling-maps {
4250				map0 {
4251					trip = <&cpu8_alert0>;
4252					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4253							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4254				};
4255				map1 {
4256					trip = <&cpu8_alert1>;
4257					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4258							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4259				};
4260			};
4261		};
4262
4263		cpu9_thermal: cpu9-thermal {
4264			polling-delay-passive = <250>;
4265			polling-delay = <0>;
4266
4267			thermal-sensors = <&tsens0 12>;
4268			sustainable-power = <1425>;
4269
4270			trips {
4271				cpu9_alert0: trip-point0 {
4272					temperature = <90000>;
4273					hysteresis = <2000>;
4274					type = "passive";
4275				};
4276
4277				cpu9_alert1: trip-point1 {
4278					temperature = <95000>;
4279					hysteresis = <2000>;
4280					type = "passive";
4281				};
4282
4283				cpu9_crit: cpu-crit {
4284					temperature = <110000>;
4285					hysteresis = <1000>;
4286					type = "critical";
4287				};
4288			};
4289
4290			cooling-maps {
4291				map0 {
4292					trip = <&cpu9_alert0>;
4293					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4294							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4295				};
4296				map1 {
4297					trip = <&cpu9_alert1>;
4298					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4299							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4300				};
4301			};
4302		};
4303
4304		aoss0-thermal {
4305			polling-delay-passive = <250>;
4306			polling-delay = <0>;
4307
4308			thermal-sensors = <&tsens0 0>;
4309
4310			trips {
4311				aoss0_alert0: trip-point0 {
4312					temperature = <90000>;
4313					hysteresis = <2000>;
4314					type = "hot";
4315				};
4316
4317				aoss0_crit: aoss0-crit {
4318					temperature = <110000>;
4319					hysteresis = <2000>;
4320					type = "critical";
4321				};
4322			};
4323		};
4324
4325		cpuss0-thermal {
4326			polling-delay-passive = <250>;
4327			polling-delay = <0>;
4328
4329			thermal-sensors = <&tsens0 7>;
4330
4331			trips {
4332				cpuss0_alert0: trip-point0 {
4333					temperature = <90000>;
4334					hysteresis = <2000>;
4335					type = "hot";
4336				};
4337				cpuss0_crit: cluster0-crit {
4338					temperature = <110000>;
4339					hysteresis = <2000>;
4340					type = "critical";
4341				};
4342			};
4343		};
4344
4345		cpuss1-thermal {
4346			polling-delay-passive = <250>;
4347			polling-delay = <0>;
4348
4349			thermal-sensors = <&tsens0 8>;
4350
4351			trips {
4352				cpuss1_alert0: trip-point0 {
4353					temperature = <90000>;
4354					hysteresis = <2000>;
4355					type = "hot";
4356				};
4357				cpuss1_crit: cluster0-crit {
4358					temperature = <110000>;
4359					hysteresis = <2000>;
4360					type = "critical";
4361				};
4362			};
4363		};
4364
4365		gpuss0-thermal {
4366			polling-delay-passive = <250>;
4367			polling-delay = <0>;
4368
4369			thermal-sensors = <&tsens0 13>;
4370
4371			trips {
4372				gpuss0_alert0: trip-point0 {
4373					temperature = <95000>;
4374					hysteresis = <2000>;
4375					type = "passive";
4376				};
4377
4378				gpuss0_crit: gpuss0-crit {
4379					temperature = <110000>;
4380					hysteresis = <2000>;
4381					type = "critical";
4382				};
4383			};
4384
4385			cooling-maps {
4386				map0 {
4387					trip = <&gpuss0_alert0>;
4388					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4389				};
4390			};
4391		};
4392
4393		gpuss1-thermal {
4394			polling-delay-passive = <250>;
4395			polling-delay = <0>;
4396
4397			thermal-sensors = <&tsens0 14>;
4398
4399			trips {
4400				gpuss1_alert0: trip-point0 {
4401					temperature = <95000>;
4402					hysteresis = <2000>;
4403					type = "passive";
4404				};
4405
4406				gpuss1_crit: gpuss1-crit {
4407					temperature = <110000>;
4408					hysteresis = <2000>;
4409					type = "critical";
4410				};
4411			};
4412
4413			cooling-maps {
4414				map0 {
4415					trip = <&gpuss1_alert0>;
4416					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4417				};
4418			};
4419		};
4420
4421		aoss1-thermal {
4422			polling-delay-passive = <250>;
4423			polling-delay = <0>;
4424
4425			thermal-sensors = <&tsens1 0>;
4426
4427			trips {
4428				aoss1_alert0: trip-point0 {
4429					temperature = <90000>;
4430					hysteresis = <2000>;
4431					type = "hot";
4432				};
4433
4434				aoss1_crit: aoss1-crit {
4435					temperature = <110000>;
4436					hysteresis = <2000>;
4437					type = "critical";
4438				};
4439			};
4440		};
4441
4442		cwlan-thermal {
4443			polling-delay-passive = <250>;
4444			polling-delay = <0>;
4445
4446			thermal-sensors = <&tsens1 1>;
4447
4448			trips {
4449				cwlan_alert0: trip-point0 {
4450					temperature = <90000>;
4451					hysteresis = <2000>;
4452					type = "hot";
4453				};
4454
4455				cwlan_crit: cwlan-crit {
4456					temperature = <110000>;
4457					hysteresis = <2000>;
4458					type = "critical";
4459				};
4460			};
4461		};
4462
4463		audio-thermal {
4464			polling-delay-passive = <250>;
4465			polling-delay = <0>;
4466
4467			thermal-sensors = <&tsens1 2>;
4468
4469			trips {
4470				audio_alert0: trip-point0 {
4471					temperature = <90000>;
4472					hysteresis = <2000>;
4473					type = "hot";
4474				};
4475
4476				audio_crit: audio-crit {
4477					temperature = <110000>;
4478					hysteresis = <2000>;
4479					type = "critical";
4480				};
4481			};
4482		};
4483
4484		ddr-thermal {
4485			polling-delay-passive = <250>;
4486			polling-delay = <0>;
4487
4488			thermal-sensors = <&tsens1 3>;
4489
4490			trips {
4491				ddr_alert0: trip-point0 {
4492					temperature = <90000>;
4493					hysteresis = <2000>;
4494					type = "hot";
4495				};
4496
4497				ddr_crit: ddr-crit {
4498					temperature = <110000>;
4499					hysteresis = <2000>;
4500					type = "critical";
4501				};
4502			};
4503		};
4504
4505		q6-hvx-thermal {
4506			polling-delay-passive = <250>;
4507			polling-delay = <0>;
4508
4509			thermal-sensors = <&tsens1 4>;
4510
4511			trips {
4512				q6_hvx_alert0: trip-point0 {
4513					temperature = <90000>;
4514					hysteresis = <2000>;
4515					type = "hot";
4516				};
4517
4518				q6_hvx_crit: q6-hvx-crit {
4519					temperature = <110000>;
4520					hysteresis = <2000>;
4521					type = "critical";
4522				};
4523			};
4524		};
4525
4526		camera-thermal {
4527			polling-delay-passive = <250>;
4528			polling-delay = <0>;
4529
4530			thermal-sensors = <&tsens1 5>;
4531
4532			trips {
4533				camera_alert0: trip-point0 {
4534					temperature = <90000>;
4535					hysteresis = <2000>;
4536					type = "hot";
4537				};
4538
4539				camera_crit: camera-crit {
4540					temperature = <110000>;
4541					hysteresis = <2000>;
4542					type = "critical";
4543				};
4544			};
4545		};
4546
4547		mdm-core-thermal {
4548			polling-delay-passive = <250>;
4549			polling-delay = <0>;
4550
4551			thermal-sensors = <&tsens1 6>;
4552
4553			trips {
4554				mdm_alert0: trip-point0 {
4555					temperature = <90000>;
4556					hysteresis = <2000>;
4557					type = "hot";
4558				};
4559
4560				mdm_crit: mdm-crit {
4561					temperature = <110000>;
4562					hysteresis = <2000>;
4563					type = "critical";
4564				};
4565			};
4566		};
4567
4568		mdm-dsp-thermal {
4569			polling-delay-passive = <250>;
4570			polling-delay = <0>;
4571
4572			thermal-sensors = <&tsens1 7>;
4573
4574			trips {
4575				mdm_dsp_alert0: trip-point0 {
4576					temperature = <90000>;
4577					hysteresis = <2000>;
4578					type = "hot";
4579				};
4580
4581				mdm_dsp_crit: mdm-dsp-crit {
4582					temperature = <110000>;
4583					hysteresis = <2000>;
4584					type = "critical";
4585				};
4586			};
4587		};
4588
4589		npu-thermal {
4590			polling-delay-passive = <250>;
4591			polling-delay = <0>;
4592
4593			thermal-sensors = <&tsens1 8>;
4594
4595			trips {
4596				npu_alert0: trip-point0 {
4597					temperature = <90000>;
4598					hysteresis = <2000>;
4599					type = "hot";
4600				};
4601
4602				npu_crit: npu-crit {
4603					temperature = <110000>;
4604					hysteresis = <2000>;
4605					type = "critical";
4606				};
4607			};
4608		};
4609
4610		video-thermal {
4611			polling-delay-passive = <250>;
4612			polling-delay = <0>;
4613
4614			thermal-sensors = <&tsens1 9>;
4615
4616			trips {
4617				video_alert0: trip-point0 {
4618					temperature = <90000>;
4619					hysteresis = <2000>;
4620					type = "hot";
4621				};
4622
4623				video_crit: video-crit {
4624					temperature = <110000>;
4625					hysteresis = <2000>;
4626					type = "critical";
4627				};
4628			};
4629		};
4630	};
4631
4632	timer {
4633		compatible = "arm,armv8-timer";
4634		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
4635			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
4636			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
4637			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
4638	};
4639};
4640