1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Google Trogdor board device tree source
4 *
5 * Copyright 2020 Google LLC.
6 */
7
8/dts-v1/;
9
10#include "sc7180-trogdor.dtsi"
11/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
12#include <arm/cros-ec-keyboard.dtsi>
13#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
14
15/ {
16	model = "Google Trogdor (rev1+)";
17	compatible = "google,trogdor", "qcom,sc7180";
18};
19
20&ap_tp_i2c {
21	status = "okay";
22};
23
24ap_ts_pen_1v8: &i2c4 {
25	status = "okay";
26	clock-frequency = <400000>;
27
28	ap_ts: touchscreen@10 {
29		compatible = "elan,ekth3500";
30		reg = <0x10>;
31		pinctrl-names = "default";
32		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
33
34		interrupt-parent = <&tlmm>;
35		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
36
37		vcc33-supply = <&pp3300_ts>;
38
39		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
40	};
41};
42
43&panel {
44	compatible = "auo,b116xa01";
45};
46
47&sdhc_2 {
48	status = "okay";
49};
50
51&trackpad {
52	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
53};
54
55&usb_hub_2_x {
56	 vdd-supply = <&pp3300_l7c>;
57};
58
59&usb_hub_3_x {
60	 vdd-supply = <&pp3300_l7c>;
61};
62
63/* PINCTRL - modifications to sc7180-trogdor.dtsi */
64
65&trackpad_int_1v8_odl {
66	pins = "gpio58";
67};
68
69/* PINCTRL - board-specific pinctrl */
70
71&tlmm {
72	gpio-line-names = "ESIM_MISO",
73			  "ESIM_MOSI",
74			  "ESIM_CLK",
75			  "ESIM_CS_L",
76			  "FP_TO_AP_IRQ_L",
77			  "FP_RST_L",
78			  "AP_TP_I2C_SDA",
79			  "AP_TP_I2C_SCL",
80			  "TS_RESET_L",
81			  "TS_INT_L",
82			  "FPMCU_BOOT0",
83			  "EDP_BRIJ_IRQ",
84			  "AP_EDP_BKLTEN",
85			  "",
86			  "",
87			  "EDP_BRIJ_I2C_SDA",
88			  "EDP_BRIJ_I2C_SCL",
89			  "HUB_RST_L",
90			  "PEN_RST_ODL",
91			  "AP_RAM_ID1",
92			  "AP_RAM_ID2",
93			  "PEN_IRQ_L",
94			  "FPMCU_SEL",
95			  "AMP_EN",
96			  "P_SENSOR_INT_L",
97			  "AP_SAR_SENSOR_SDA",
98			  "AP_SAR_SENSOR_SCL",
99			  "",
100			  "HP_IRQ",
101			  "AP_RAM_ID0",
102			  "EN_PP3300_DX_EDP",
103			  "AP_BRD_ID2",
104			  "BRIJ_SUSPEND",
105			  "AP_BRD_ID0",
106			  "AP_H1_SPI_MISO",
107			  "AP_H1_SPI_MOSI",
108			  "AP_H1_SPI_CLK",
109			  "AP_H1_SPI_CS_L",
110			  "",
111			  "",
112			  "",
113			  "",
114			  "H1_AP_INT_ODL",
115			  "",
116			  "UART_AP_TX_DBG_RX",
117			  "UART_DBG_TX_AP_RX",
118			  "HP_I2C_SDA",
119			  "HP_I2C_SCL",
120			  "FORCED_USB_BOOT",
121			  "",
122			  "",
123			  "AMP_DIN",
124			  "PEN_PDCT_L",
125			  "HP_BCLK",
126			  "HP_LRCLK",
127			  "HP_DOUT",
128			  "HP_DIN",
129			  "HP_MCLK",
130			  "TRACKPAD_INT_1V8_ODL",
131			  "AP_EC_SPI_MISO",
132			  "AP_EC_SPI_MOSI",
133			  "AP_EC_SPI_CLK",
134			  "AP_EC_SPI_CS_L",
135			  "AP_SPI_CLK",
136			  "AP_SPI_MOSI",
137			  "AP_SPI_MISO",
138			  /*
139			   * AP_FLASH_WP_L is crossystem ABI. Schematics
140			   * call it BIOS_FLASH_WP_L.
141			   */
142			  "AP_FLASH_WP_L",
143			  "DBG_SPI_HOLD_L",
144			  "AP_SPI_CS0_L",
145			  "SD_CD_ODL",
146			  "",
147			  "",
148			  "",
149			  "",
150			  "",
151			  "UIM2_DATA",
152			  "UIM2_CLK",
153			  "UIM2_RST",
154			  "UIM2_PRESENT",
155			  "UIM1_DATA",
156			  "UIM1_CLK",
157			  "UIM1_RST",
158			  "",
159			  "EN_PP3300_CODEC",
160			  "EN_PP3300_HUB",
161			  "",
162			  "AP_SPI_FP_MISO",
163			  "AP_SPI_FP_MOSI",
164			  "AP_SPI_FP_CLK",
165			  "AP_SPI_FP_CS_L",
166			  "AP_SKU_ID1",
167			  "AP_RST_REQ",
168			  "",
169			  "AP_BRD_ID1",
170			  "AP_EC_INT_L",
171			  "",
172			  "",
173			  "",
174			  "",
175			  "",
176			  "",
177			  "",
178			  "",
179			  "",
180			  "EDP_BRIJ_EN",
181			  "AP_SKU_ID0",
182			  "",
183			  "",
184			  "",
185			  "",
186			  "",
187			  "",
188			  "",
189			  "",
190			  "",
191			  "AP_TS_PEN_I2C_SDA",
192			  "AP_TS_PEN_I2C_SCL",
193			  "DP_HOT_PLUG_DET",
194			  "EC_IN_RW_ODL";
195};
196