1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Google CoachZ board device tree source
4 *
5 * Copyright 2020 Google LLC.
6 */
7
8#include "sc7180.dtsi"
9
10ap_ec_spi: &spi6 {};
11ap_h1_spi: &spi0 {};
12
13#include "sc7180-trogdor.dtsi"
14
15/* Deleted nodes from trogdor.dtsi */
16
17/delete-node/ &alc5682;
18/delete-node/ &pp3300_codec;
19
20/ {
21	/* BOARD-SPECIFIC TOP LEVEL NODES */
22
23	adau7002: audio-codec-1 {
24		compatible = "adi,adau7002";
25		IOVDD-supply = <&pp1800_l15a>;
26		wakeup-delay-ms = <15>;
27		#sound-dai-cells = <0>;
28	};
29
30	thermal-zones {
31		skin_temp_thermal: skin-temp-thermal {
32			polling-delay-passive = <250>;
33			polling-delay = <0>;
34
35			thermal-sensors = <&pm6150_adc_tm 1>;
36			sustainable-power = <814>;
37
38			trips {
39				skin_temp_alert0: trip-point0 {
40					temperature = <42000>;
41					hysteresis = <1000>;
42					type = "passive";
43				};
44
45				skin_temp_alert1: trip-point1 {
46					temperature = <45000>;
47					hysteresis = <1000>;
48					type = "passive";
49				};
50
51				skin-temp-crit {
52					temperature = <60000>;
53					hysteresis = <1000>;
54					type = "critical";
55				};
56			};
57
58			cooling-maps {
59				map0 {
60					trip = <&skin_temp_alert0>;
61					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
62							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
63				};
64
65				map1 {
66					trip = <&skin_temp_alert1>;
67					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
68							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
69				};
70			};
71		};
72	};
73};
74
75&ap_spi_fp {
76	status = "okay";
77};
78
79&backlight {
80	pwms = <&cros_ec_pwm 0>;
81};
82
83&camcc {
84	status = "okay";
85};
86
87&cros_ec {
88	cros_ec_proximity: proximity {
89		compatible = "google,cros-ec-mkbp-proximity";
90		label = "proximity-wifi";
91	};
92};
93
94ap_ts_pen_1v8: &i2c4 {
95	status = "okay";
96	clock-frequency = <400000>;
97
98	ap_ts: touchscreen@5d {
99		compatible = "goodix,gt7375p";
100		reg = <0x5d>;
101		pinctrl-names = "default";
102		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
103
104		interrupt-parent = <&tlmm>;
105		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
106
107		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
108
109		vdd-supply = <&pp3300_ts>;
110	};
111};
112
113&i2c7 {
114	status = "disabled";
115};
116
117&i2c9 {
118	status = "disabled";
119};
120
121&panel {
122	compatible = "boe,nv110wtm-n61";
123};
124
125&pm6150_adc {
126	skin-temp-thermistor@4e {
127		reg = <ADC5_AMUX_THM2_100K_PU>;
128		qcom,ratiometric;
129		qcom,hw-settle-time = <200>;
130	};
131};
132
133&pm6150_adc_tm {
134	status = "okay";
135
136	skin-temp-thermistor@1 {
137		reg = <1>;
138		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
139		qcom,ratiometric;
140		qcom,hw-settle-time-us = <200>;
141	};
142};
143
144&pp3300_dx_edp {
145	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
146};
147
148&sdhc_2 {
149	status = "okay";
150};
151
152&sn65dsi86_out {
153	data-lanes = <0 1 2 3>;
154};
155
156&sound {
157	compatible = "google,sc7180-coachz";
158	model = "sc7180-adau7002-max98357a";
159	audio-routing = "PDM_DAT", "DMIC";
160
161	pinctrl-names = "default";
162	pinctrl-0 = <&dmic_clk_en>;
163};
164
165&sound_multimedia0_codec {
166	sound-dai = <&adau7002>;
167};
168
169/* PINCTRL - modifications to sc7180-trogdor.dtsi */
170
171&en_pp3300_dx_edp {
172	pinmux  {
173		pins = "gpio67";
174	};
175
176	pinconf {
177		pins = "gpio67";
178	};
179};
180
181&ts_reset_l {
182	pinconf {
183		/*
184		 * We want reset state by default and it will be up to the
185		 * driver to disable this when it's ready.
186		 */
187		output-low;
188	};
189};
190
191/* PINCTRL - board-specific pinctrl */
192
193&tlmm {
194	gpio-line-names = "HUB_RST_L",
195			  "AP_RAM_ID0",
196			  "AP_SKU_ID2",
197			  "AP_RAM_ID1",
198			  "FP_TO_AP_IRQ_L",
199			  "AP_RAM_ID2",
200			  "UF_CAM_EN",
201			  "WF_CAM_EN",
202			  "TS_RESET_L",
203			  "TS_INT_L",
204			  "FPMCU_BOOT0",
205			  "EDP_BRIJ_IRQ",
206			  "AP_EDP_BKLTEN",
207			  "UF_CAM_MCLK",
208			  "WF_CAM_CLK",
209			  "EDP_BRIJ_I2C_SDA",
210			  "EDP_BRIJ_I2C_SCL",
211			  "UF_CAM_SDA",
212			  "UF_CAM_SCL",
213			  "WF_CAM_SDA",
214			  "WF_CAM_SCL",
215			  "WLC_IRQ",
216			  "FP_RST_L",
217			  "AMP_EN",
218			  "WLC_NRST",
219			  "AP_SAR_SENSOR_SDA",
220			  "AP_SAR_SENSOR_SCL",
221			  "",
222			  "",
223			  "WF_CAM_RST_L",
224			  "UF_CAM_RST_L",
225			  "AP_BRD_ID2",
226			  "BRIJ_SUSPEND",
227			  "AP_BRD_ID0",
228			  "AP_H1_SPI_MISO",
229			  "AP_H1_SPI_MOSI",
230			  "AP_H1_SPI_CLK",
231			  "AP_H1_SPI_CS_L",
232			  "",
233			  "",
234			  "",
235			  "",
236			  "H1_AP_INT_ODL",
237			  "",
238			  "UART_AP_TX_DBG_RX",
239			  "UART_DBG_TX_AP_RX",
240			  "",
241			  "",
242			  "FORCED_USB_BOOT",
243			  "AMP_BCLK",
244			  "AMP_LRCLK",
245			  "AMP_DIN",
246			  "",
247			  "HP_BCLK",
248			  "HP_LRCLK",
249			  "HP_DOUT",
250			  "HP_DIN",
251			  "HP_MCLK",
252			  "AP_SKU_ID0",
253			  "AP_EC_SPI_MISO",
254			  "AP_EC_SPI_MOSI",
255			  "AP_EC_SPI_CLK",
256			  "AP_EC_SPI_CS_L",
257			  "AP_SPI_CLK",
258			  "AP_SPI_MOSI",
259			  "AP_SPI_MISO",
260			  /*
261			   * AP_FLASH_WP_L is crossystem ABI. Schematics
262			   * call it BIOS_FLASH_WP_L.
263			   */
264			  "AP_FLASH_WP_L",
265			  "EN_PP3300_DX_EDP",
266			  "AP_SPI_CS0_L",
267			  "SD_CD_ODL",
268			  "",
269			  "",
270			  "",
271			  "",
272			  "EN_FP_RAILS",
273			  "UIM2_DATA",
274			  "UIM2_CLK",
275			  "UIM2_RST",
276			  "UIM2_PRESENT_L",
277			  "UIM1_DATA",
278			  "UIM1_CLK",
279			  "UIM1_RST",
280			  "",
281			  "",
282			  "HUB_EN",
283			  "",
284			  "AP_SPI_FP_MISO",
285			  "AP_SPI_FP_MOSI",
286			  "AP_SPI_FP_CLK",
287			  "AP_SPI_FP_CS_L",
288			  "AP_SKU_ID1",
289			  "AP_RST_REQ",
290			  "",
291			  "AP_BRD_ID1",
292			  "AP_EC_INT_L",
293			  "",
294			  "",
295			  "",
296			  "",
297			  "",
298			  "",
299			  "",
300			  "",
301			  "",
302			  "EDP_BRIJ_EN",
303			  "",
304			  "",
305			  "",
306			  "",
307			  "",
308			  "",
309			  "",
310			  "",
311			  "",
312			  "",
313			  "AP_TS_PEN_I2C_SDA",
314			  "AP_TS_PEN_I2C_SCL",
315			  "DP_HOT_PLUG_DET",
316			  "EC_IN_RW_ODL";
317
318	dmic_clk_en: dmic_clk_en {
319		pinmux {
320			pins = "gpio83";
321			function = "gpio";
322		};
323
324		pinconf {
325			pins = "gpio83";
326			drive-strength = <8>;
327			bias-pull-up;
328		};
329	};
330};
331