xref: /openbmc/linux/arch/arm64/boot/dts/qcom/pmp8074.dtsi (revision 41c18552)
1// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
2
3#include <dt-bindings/spmi/spmi.h>
4#include <dt-bindings/iio/qcom,spmi-vadc.h>
5
6&spmi_bus {
7	pmic@0 {
8		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
9		reg = <0x0 SPMI_USID>;
10		#address-cells = <1>;
11		#size-cells = <0>;
12
13		pmp8074_adc: adc@3100 {
14			compatible = "qcom,spmi-adc-rev2";
15			reg = <0x3100>;
16			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
17			#address-cells = <1>;
18			#size-cells = <0>;
19			#io-channel-cells = <1>;
20
21			channel@0 {
22				reg = <ADC5_REF_GND>;
23				qcom,pre-scaling = <1 1>;
24				label = "ref_gnd";
25			};
26
27			channel@1 {
28				reg = <ADC5_1P25VREF>;
29				qcom,pre-scaling = <1 1>;
30				label = "vref_1p25";
31			};
32
33			channel@2 {
34				reg = <ADC5_VREF_VADC>;
35				qcom,pre-scaling = <1 1>;
36				label = "vref_vadc";
37			};
38
39			channel@6 {
40				reg = <ADC5_DIE_TEMP>;
41				qcom,pre-scaling = <1 1>;
42				label = "pmic_die";
43			};
44
45			channel@76 {
46				reg = <ADC5_XO_THERM_100K_PU>;
47				qcom,ratiometric;
48				qcom,hw-settle-time = <200>;
49				qcom,pre-scaling = <1 1>;
50				label = "xo_therm";
51			};
52
53			channel@77 {
54				reg = <ADC5_AMUX_THM1_100K_PU>;
55				qcom,ratiometric;
56				qcom,hw-settle-time = <200>;
57				qcom,pre-scaling = <1 1>;
58				label = "pa_therm1";
59			};
60
61			channel@78 {
62				reg = <ADC5_AMUX_THM2_100K_PU>;
63				qcom,ratiometric;
64				qcom,hw-settle-time = <200>;
65				qcom,pre-scaling = <1 1>;
66				label = "pa_therm2";
67			};
68
69			channel@79 {
70				reg = <ADC5_AMUX_THM3_100K_PU>;
71				qcom,ratiometric;
72				qcom,hw-settle-time = <200>;
73				qcom,pre-scaling = <1 1>;
74				label = "pa_therm3";
75			};
76
77			channel@131 {
78				reg = <ADC5_VPH_PWR>;
79				qcom,pre-scaling = <1 3>;
80				label = "vph_pwr";
81			};
82		};
83
84		pmp8074_rtc: rtc@6000 {
85			compatible = "qcom,pm8941-rtc";
86			reg = <0x6000>, <0x6100>;
87			reg-names = "rtc", "alarm";
88			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
89			allow-set-time;
90			status = "disabled";
91		};
92
93		pmp8074_gpios: gpio@c000 {
94			compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
95			reg = <0xc000>;
96			gpio-controller;
97			#gpio-cells = <2>;
98			gpio-ranges = <&pmp8074_gpios 0 0 12>;
99			interrupt-controller;
100			#interrupt-cells = <2>;
101		};
102	};
103
104	pmic@1 {
105		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
106		reg = <0x1 SPMI_USID>;
107
108		regulators {
109			compatible = "qcom,pmp8074-regulators";
110
111			s3: s3 {
112				regulator-name = "vdd_s3";
113				regulator-min-microvolt = <592000>;
114				regulator-max-microvolt = <1064000>;
115				regulator-always-on;
116				regulator-boot-on;
117			};
118
119			s4: s4 {
120				regulator-name = "vdd_s4";
121				regulator-min-microvolt = <712000>;
122				regulator-max-microvolt = <992000>;
123				regulator-always-on;
124				regulator-boot-on;
125			};
126
127			l11: l11 {
128				regulator-name = "l11";
129				regulator-min-microvolt = <1800000>;
130				regulator-max-microvolt = <3300000>;
131			};
132		};
133	};
134};
135