1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/interrupt-controller/irq.h> 3#include <dt-bindings/spmi/spmi.h> 4 5&spmi_bus { 6 pmi8998_lsid0: pmic@2 { 7 compatible = "qcom,pmi8998", "qcom,spmi-pmic"; 8 reg = <0x2 SPMI_USID>; 9 #address-cells = <1>; 10 #size-cells = <0>; 11 12 pmi8998_charger: charger@1000 { 13 compatible = "qcom,pmi8998-charger"; 14 reg = <0x1000>; 15 16 interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, 17 <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, 18 <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, 19 <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; 20 interrupt-names = "usb-plugin", 21 "bat-ov", 22 "wdog-bark", 23 "usbin-icl-change"; 24 25 io-channels = <&pmi8998_rradc 3>, 26 <&pmi8998_rradc 4>; 27 io-channel-names = "usbin_i", "usbin_v"; 28 29 status = "disabled"; 30 }; 31 32 pmi8998_gpios: gpio@c000 { 33 compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; 34 reg = <0xc000>; 35 gpio-controller; 36 gpio-ranges = <&pmi8998_gpios 0 0 14>; 37 #gpio-cells = <2>; 38 interrupt-controller; 39 #interrupt-cells = <2>; 40 }; 41 42 pmi8998_rradc: adc@4500 { 43 compatible = "qcom,pmi8998-rradc"; 44 reg = <0x4500>; 45 #io-channel-cells = <1>; 46 }; 47 }; 48 49 pmi8998_lsid1: pmic@3 { 50 compatible = "qcom,pmi8998", "qcom,spmi-pmic"; 51 reg = <0x3 SPMI_USID>; 52 #address-cells = <1>; 53 #size-cells = <0>; 54 55 labibb { 56 compatible = "qcom,pmi8998-lab-ibb"; 57 58 ibb: ibb { 59 interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, 60 <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; 61 interrupt-names = "sc-err", "ocp"; 62 }; 63 64 lab: lab { 65 interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, 66 <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; 67 interrupt-names = "sc-err", "ocp"; 68 }; 69 }; 70 71 pmi8998_lpg: pwm { 72 compatible = "qcom,pmi8998-lpg"; 73 74 #address-cells = <1>; 75 #size-cells = <0>; 76 #pwm-cells = <2>; 77 78 status = "disabled"; 79 }; 80 81 pmi8998_flash: led-controller@d300 { 82 compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; 83 reg = <0xd300>; 84 status = "disabled"; 85 }; 86 87 pmi8998_wled: leds@d800 { 88 compatible = "qcom,pmi8998-wled"; 89 reg = <0xd800>, <0xd900>; 90 interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, 91 <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; 92 interrupt-names = "ovp", "short"; 93 label = "backlight"; 94 95 status = "disabled"; 96 }; 97 }; 98}; 99