1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* Copyright 2018 Google LLC. */ 3 4#include <dt-bindings/iio/qcom,spmi-vadc.h> 5#include <dt-bindings/input/linux-event-codes.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/spmi/spmi.h> 8#include <dt-bindings/thermal/thermal.h> 9 10/ { 11 thermal-zones { 12 pm8998-thermal { 13 polling-delay-passive = <250>; 14 polling-delay = <1000>; 15 16 thermal-sensors = <&pm8998_temp>; 17 18 trips { 19 pm8998_alert0: pm8998-alert0 { 20 temperature = <105000>; 21 hysteresis = <2000>; 22 type = "passive"; 23 }; 24 pm8998_crit: pm8998-crit { 25 temperature = <125000>; 26 hysteresis = <2000>; 27 type = "critical"; 28 }; 29 }; 30 }; 31 }; 32}; 33 34&spmi_bus { 35 pm8998_lsid0: pmic@0 { 36 compatible = "qcom,pm8998", "qcom,spmi-pmic"; 37 reg = <0x0 SPMI_USID>; 38 #address-cells = <1>; 39 #size-cells = <0>; 40 41 pm8998_pon: pon@800 { 42 compatible = "qcom,pm8998-pon"; 43 44 reg = <0x800>; 45 mode-bootloader = <0x2>; 46 mode-recovery = <0x1>; 47 48 pm8998_pwrkey: pwrkey { 49 compatible = "qcom,pm8941-pwrkey"; 50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 51 debounce = <15625>; 52 bias-pull-up; 53 linux,code = <KEY_POWER>; 54 }; 55 56 pm8998_resin: resin { 57 compatible = "qcom,pm8941-resin"; 58 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; 59 debounce = <15625>; 60 bias-pull-up; 61 status = "disabled"; 62 }; 63 }; 64 65 pm8998_temp: temp-alarm@2400 { 66 compatible = "qcom,spmi-temp-alarm"; 67 reg = <0x2400>; 68 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; 69 io-channels = <&pm8998_adc ADC5_DIE_TEMP>; 70 io-channel-names = "thermal"; 71 #thermal-sensor-cells = <0>; 72 }; 73 74 pm8998_coincell: charger@2800 { 75 compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; 76 reg = <0x2800>; 77 78 status = "disabled"; 79 }; 80 81 pm8998_adc: adc@3100 { 82 compatible = "qcom,spmi-adc-rev2"; 83 reg = <0x3100>; 84 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 85 #address-cells = <1>; 86 #size-cells = <0>; 87 #io-channel-cells = <1>; 88 89 adc-chan@6 { 90 reg = <ADC5_DIE_TEMP>; 91 label = "die_temp"; 92 }; 93 }; 94 95 pm8998_adc_tm: adc-tm@3400 { 96 compatible = "qcom,spmi-adc-tm-hc"; 97 reg = <0x3400>; 98 interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; 99 #thermal-sensor-cells = <1>; 100 #address-cells = <1>; 101 #size-cells = <0>; 102 status = "disabled"; 103 }; 104 105 rtc@6000 { 106 compatible = "qcom,pm8941-rtc"; 107 reg = <0x6000>, <0x6100>; 108 reg-names = "rtc", "alarm"; 109 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 110 }; 111 112 pm8998_gpios: gpio@c000 { 113 compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; 114 reg = <0xc000>; 115 gpio-controller; 116 gpio-ranges = <&pm8998_gpios 0 0 26>; 117 #gpio-cells = <2>; 118 interrupt-controller; 119 #interrupt-cells = <2>; 120 }; 121 122 }; 123 124 pm8998_lsid1: pmic@1 { 125 compatible = "qcom,pm8998", "qcom,spmi-pmic"; 126 reg = <0x1 SPMI_USID>; 127 #address-cells = <1>; 128 #size-cells = <0>; 129 }; 130}; 131