1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, AngeloGioacchino Del Regno 4 * <angelogioacchino.delregno@somainline.org> 5 * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> 6 */ 7 8#include <dt-bindings/iio/qcom,spmi-vadc.h> 9#include <dt-bindings/input/linux-event-codes.h> 10#include <dt-bindings/interrupt-controller/irq.h> 11#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> 12#include <dt-bindings/spmi/spmi.h> 13 14&spmi_bus { 15 pmic@0 { 16 compatible = "qcom,pm8950", "qcom,spmi-pmic"; 17 reg = <0x0 SPMI_USID>; 18 #address-cells = <1>; 19 #size-cells = <0>; 20 21 pon@800 { 22 compatible = "qcom,pm8916-pon"; 23 reg = <0x0800>; 24 mode-bootloader = <0x2>; 25 mode-recovery = <0x1>; 26 27 pwrkey { 28 compatible = "qcom,pm8941-pwrkey"; 29 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 30 debounce = <15625>; 31 bias-pull-up; 32 linux,code = <KEY_POWER>; 33 }; 34 }; 35 36 pm8950_temp: temp-alarm@2400 { 37 compatible = "qcom,spmi-temp-alarm"; 38 reg = <0x2400>; 39 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; 40 io-channels = <&pm8950_vadc VADC_DIE_TEMP>; 41 io-channel-names = "thermal"; 42 #thermal-sensor-cells = <0>; 43 }; 44 45 pm8950_vadc: adc@3100 { 46 compatible = "qcom,spmi-vadc"; 47 reg = <0x3100>; 48 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 49 #address-cells = <1>; 50 #size-cells = <0>; 51 #io-channel-cells = <1>; 52 53 vcoin@5 { 54 reg = <VADC_VCOIN>; 55 qcom,pre-scaling = <1 1>; 56 }; 57 58 vph-pwr@7 { 59 reg = <VADC_VSYS>; 60 qcom,pre-scaling = <1 1>; 61 }; 62 63 die-temp@8 { 64 reg = <VADC_DIE_TEMP>; 65 qcom,pre-scaling = <1 1>; 66 }; 67 68 ref-625mv@9 { 69 reg = <VADC_REF_625MV>; 70 qcom,pre-scaling = <1 1>; 71 }; 72 73 ref-1250mv@a { 74 reg = <VADC_REF_1250MV>; 75 qcom,pre-scaling = <1 1>; 76 }; 77 78 ref-buf-625mv@c { 79 reg = <VADC_SPARE1>; 80 qcom,pre-scaling = <1 1>; 81 }; 82 83 ref-gnd@e { 84 reg = <VADC_GND_REF>; 85 }; 86 87 ref-vdd@f { 88 reg = <VADC_VDD_VADC>; 89 }; 90 91 pa-therm1@11 { 92 reg = <VADC_P_MUX2_1_1>; 93 qcom,pre-scaling = <1 1>; 94 qcom,ratiometric; 95 qcom,hw-settle-time = <200>; 96 }; 97 98 case-therm@13 { 99 reg = <VADC_P_MUX4_1_1>; 100 qcom,pre-scaling = <1 1>; 101 qcom,ratiometric; 102 qcom,hw-settle-time = <200>; 103 }; 104 105 xo-therm@32 { 106 reg = <VADC_LR_MUX3_XO_THERM>; 107 qcom,pre-scaling = <1 1>; 108 qcom,ratiometric; 109 qcom,hw-settle-time = <200>; 110 }; 111 112 pa-therm0@36 { 113 reg = <VADC_LR_MUX7_HW_ID>; 114 qcom,pre-scaling = <1 1>; 115 qcom,ratiometric; 116 qcom,hw-settle-time = <200>; 117 }; 118 119 xo-therm-buf@3c { 120 reg = <VADC_LR_MUX3_BUF_XO_THERM>; 121 qcom,pre-scaling = <1 1>; 122 qcom,ratiometric; 123 qcom,hw-settle-time = <200>; 124 }; 125 }; 126 127 rtc@6000 { 128 compatible = "qcom,pm8941-rtc"; 129 reg = <0x6000>, <0x6100>; 130 reg-names = "rtc", "alarm"; 131 interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; 132 }; 133 134 pm8950_mpps: mpps@a000 { 135 compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; 136 reg = <0xa000>; 137 gpio-controller; 138 gpio-ranges = <&pm8950_mpps 0 0 4>; 139 #gpio-cells = <2>; 140 interrupt-controller; 141 #interrupt-cells = <2>; 142 }; 143 144 pm8950_gpios: gpio@c000 { 145 compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; 146 reg = <0xc000>; 147 gpio-controller; 148 gpio-ranges = <&pm8950_gpios 0 0 8>; 149 #gpio-cells = <2>; 150 interrupt-controller; 151 #interrupt-cells = <2>; 152 }; 153 }; 154 155 pmic@1 { 156 compatible = "qcom,pm8950", "qcom,spmi-pmic"; 157 reg = <0x1 SPMI_USID>; 158 #address-cells = <1>; 159 #size-cells = <0>; 160 161 pm8950_spmi_regulators: regulators { 162 compatible = "qcom,pm8950-regulators"; 163 }; 164 }; 165}; 166