1#include <dt-bindings/iio/qcom,spmi-vadc.h> 2#include <dt-bindings/interrupt-controller/irq.h> 3#include <dt-bindings/spmi/spmi.h> 4 5&spmi_bus { 6 7 pm8916_0: pm8916@0 { 8 compatible = "qcom,pm8916", "qcom,spmi-pmic"; 9 reg = <0x0 SPMI_USID>; 10 #address-cells = <1>; 11 #size-cells = <0>; 12 13 rtc@6000 { 14 compatible = "qcom,pm8941-rtc"; 15 reg = <0x6000 0x6100>; 16 reg-names = "rtc", "alarm"; 17 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 18 }; 19 20 pwrkey@800 { 21 compatible = "qcom,pm8941-pwrkey"; 22 reg = <0x800>; 23 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 24 debounce = <15625>; 25 bias-pull-up; 26 }; 27 28 pm8916_gpios: gpios@c000 { 29 compatible = "qcom,pm8916-gpio"; 30 reg = <0xc000 0x400>; 31 gpio-controller; 32 #gpio-cells = <2>; 33 interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, 34 <0 0xc1 0 IRQ_TYPE_NONE>, 35 <0 0xc2 0 IRQ_TYPE_NONE>, 36 <0 0xc3 0 IRQ_TYPE_NONE>; 37 }; 38 39 pm8916_mpps: mpps@a000 { 40 compatible = "qcom,pm8916-mpp"; 41 reg = <0xa000 0x400>; 42 gpio-controller; 43 #gpio-cells = <2>; 44 interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, 45 <0 0xa1 0 IRQ_TYPE_NONE>, 46 <0 0xa2 0 IRQ_TYPE_NONE>, 47 <0 0xa3 0 IRQ_TYPE_NONE>; 48 }; 49 50 pm8916_temp: temp-alarm@2400 { 51 compatible = "qcom,spmi-temp-alarm"; 52 reg = <0x2400 0x100>; 53 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; 54 io-channels = <&pm8916_vadc VADC_DIE_TEMP>; 55 io-channel-names = "thermal"; 56 #thermal-sensor-cells = <0>; 57 }; 58 59 pm8916_vadc: vadc@3100 { 60 compatible = "qcom,spmi-vadc"; 61 reg = <0x3100 0x100>; 62 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 63 #address-cells = <1>; 64 #size-cells = <0>; 65 #io-channel-cells = <1>; 66 67 usb_in { 68 reg = <VADC_USBIN>; 69 qcom,pre-scaling = <1 10>; 70 }; 71 vph_pwr { 72 reg = <VADC_VSYS>; 73 qcom,pre-scaling = <1 3>; 74 }; 75 die_temp { 76 reg = <VADC_DIE_TEMP>; 77 }; 78 ref_625mv { 79 reg = <VADC_REF_625MV>; 80 }; 81 ref_1250v { 82 reg = <VADC_REF_1250MV>; 83 }; 84 ref_gnd { 85 reg = <VADC_GND_REF>; 86 }; 87 ref_vdd { 88 reg = <VADC_VDD_VADC>; 89 }; 90 }; 91 }; 92 93 pm8916_1: pm8916@1 { 94 compatible = "qcom,spmi-pmic"; 95 reg = <0x1 SPMI_USID>; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 }; 99}; 100