1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6#include <dt-bindings/interrupt-controller/irq.h>
7#include <dt-bindings/spmi/spmi.h>
8
9/ {
10	thermal-zones {
11		pm8550vs-c-thermal {
12			polling-delay-passive = <100>;
13			polling-delay = <0>;
14
15			thermal-sensors = <&pm8550vs_c_temp_alarm>;
16
17			trips {
18				trip0 {
19					temperature = <95000>;
20					hysteresis = <0>;
21					type = "passive";
22				};
23
24				trip1 {
25					temperature = <115000>;
26					hysteresis = <0>;
27					type = "hot";
28				};
29			};
30		};
31
32		pm8550vs-d-thermal {
33			polling-delay-passive = <100>;
34			polling-delay = <0>;
35
36			thermal-sensors = <&pm8550vs_d_temp_alarm>;
37
38			trips {
39				trip0 {
40					temperature = <95000>;
41					hysteresis = <0>;
42					type = "passive";
43				};
44
45				trip1 {
46					temperature = <115000>;
47					hysteresis = <0>;
48					type = "hot";
49				};
50			};
51		};
52
53		pm8550vs-e-thermal {
54			polling-delay-passive = <100>;
55			polling-delay = <0>;
56
57			thermal-sensors = <&pm8550vs_e_temp_alarm>;
58
59			trips {
60				trip0 {
61					temperature = <95000>;
62					hysteresis = <0>;
63					type = "passive";
64				};
65
66				trip1 {
67					temperature = <115000>;
68					hysteresis = <0>;
69					type = "hot";
70				};
71			};
72		};
73
74		pm8550vs-g-thermal {
75			polling-delay-passive = <100>;
76			polling-delay = <0>;
77
78			thermal-sensors = <&pm8550vs_g_temp_alarm>;
79
80			trips {
81				trip0 {
82					temperature = <95000>;
83					hysteresis = <0>;
84					type = "passive";
85				};
86
87				trip1 {
88					temperature = <115000>;
89					hysteresis = <0>;
90					type = "hot";
91				};
92			};
93		};
94	};
95};
96
97
98&spmi_bus {
99	pm8550vs_c: pmic@2 {
100		compatible = "qcom,pm8550", "qcom,spmi-pmic";
101		reg = <0x2 SPMI_USID>;
102		#address-cells = <1>;
103		#size-cells = <0>;
104
105		pm8550vs_c_temp_alarm: temp-alarm@a00 {
106			compatible = "qcom,spmi-temp-alarm";
107			reg = <0xa00>;
108			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
109			#thermal-sensor-cells = <0>;
110		};
111
112		pm8550vs_c_gpios: gpio@8800 {
113			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
114			reg = <0x8800>;
115			gpio-controller;
116			gpio-ranges = <&pm8550vs_c_gpios 0 0 6>;
117			#gpio-cells = <2>;
118			interrupt-controller;
119			#interrupt-cells = <2>;
120		};
121	};
122
123	pm8550vs_d: pmic@3 {
124		compatible = "qcom,pm8550", "qcom,spmi-pmic";
125		reg = <0x3 SPMI_USID>;
126		#address-cells = <1>;
127		#size-cells = <0>;
128
129		pm8550vs_d_temp_alarm: temp-alarm@a00 {
130			compatible = "qcom,spmi-temp-alarm";
131			reg = <0xa00>;
132			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
133			#thermal-sensor-cells = <0>;
134		};
135
136		pm8550vs_d_gpios: gpio@8800 {
137			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
138			reg = <0x8800>;
139			gpio-controller;
140			gpio-ranges = <&pm8550vs_d_gpios 0 0 6>;
141			#gpio-cells = <2>;
142			interrupt-controller;
143			#interrupt-cells = <2>;
144		};
145	};
146
147	pm8550vs_e: pmic@4 {
148		compatible = "qcom,pm8550", "qcom,spmi-pmic";
149		reg = <0x4 SPMI_USID>;
150		#address-cells = <1>;
151		#size-cells = <0>;
152
153		pm8550vs_e_temp_alarm: temp-alarm@a00 {
154			compatible = "qcom,spmi-temp-alarm";
155			reg = <0xa00>;
156			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
157			#thermal-sensor-cells = <0>;
158		};
159
160		pm8550vs_e_gpios: gpio@8800 {
161			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
162			reg = <0x8800>;
163			gpio-controller;
164			gpio-ranges = <&pm8550vs_e_gpios 0 0 6>;
165			#gpio-cells = <2>;
166			interrupt-controller;
167			#interrupt-cells = <2>;
168		};
169	};
170
171	pm8550vs_g: pmic@6 {
172		compatible = "qcom,pm8550", "qcom,spmi-pmic";
173		reg = <0x6 SPMI_USID>;
174		#address-cells = <1>;
175		#size-cells = <0>;
176
177		pm8550vs_g_temp_alarm: temp-alarm@a00 {
178			compatible = "qcom,spmi-temp-alarm";
179			reg = <0xa00>;
180			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
181			#thermal-sensor-cells = <0>;
182		};
183
184		pm8550vs_g_gpios: gpio@8800 {
185			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
186			reg = <0x8800>;
187			gpio-controller;
188			gpio-ranges = <&pm8550vs_g_gpios 0 0 6>;
189			#gpio-cells = <2>;
190			interrupt-controller;
191			#interrupt-cells = <2>;
192		};
193	};
194};
195