xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8998.dtsi (revision 7f1005dd) 
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/qcom,gcc-msm8998.h>
6#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/power/qcom-rpmpd.h>
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	interrupt-parent = <&intc>;
14
15	qcom,msm-id = <292 0x0>;
16
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	chosen { };
21
22	memory@80000000 {
23		device_type = "memory";
24		/* We expect the bootloader to fill in the reg */
25		reg = <0x0 0x80000000 0x0 0x0>;
26	};
27
28	reserved-memory {
29		#address-cells = <2>;
30		#size-cells = <2>;
31		ranges;
32
33		hyp_mem: memory@85800000 {
34			reg = <0x0 0x85800000 0x0 0x600000>;
35			no-map;
36		};
37
38		xbl_mem: memory@85e00000 {
39			reg = <0x0 0x85e00000 0x0 0x100000>;
40			no-map;
41		};
42
43		smem_mem: smem-mem@86000000 {
44			reg = <0x0 0x86000000 0x0 0x200000>;
45			no-map;
46		};
47
48		tz_mem: memory@86200000 {
49			reg = <0x0 0x86200000 0x0 0x2d00000>;
50			no-map;
51		};
52
53		rmtfs_mem: memory@88f00000 {
54			compatible = "qcom,rmtfs-mem";
55			reg = <0x0 0x88f00000 0x0 0x200000>;
56			no-map;
57
58			qcom,client-id = <1>;
59			qcom,vmid = <15>;
60		};
61
62		spss_mem: memory@8ab00000 {
63			reg = <0x0 0x8ab00000 0x0 0x700000>;
64			no-map;
65		};
66
67		adsp_mem: memory@8b200000 {
68			reg = <0x0 0x8b200000 0x0 0x1a00000>;
69			no-map;
70		};
71
72		mpss_mem: memory@8cc00000 {
73			reg = <0x0 0x8cc00000 0x0 0x7000000>;
74			no-map;
75		};
76
77		venus_mem: memory@93c00000 {
78			reg = <0x0 0x93c00000 0x0 0x500000>;
79			no-map;
80		};
81
82		mba_mem: memory@94100000 {
83			reg = <0x0 0x94100000 0x0 0x200000>;
84			no-map;
85		};
86
87		slpi_mem: memory@94300000 {
88			reg = <0x0 0x94300000 0x0 0xf00000>;
89			no-map;
90		};
91
92		ipa_fw_mem: memory@95200000 {
93			reg = <0x0 0x95200000 0x0 0x10000>;
94			no-map;
95		};
96
97		ipa_gsi_mem: memory@95210000 {
98			reg = <0x0 0x95210000 0x0 0x5000>;
99			no-map;
100		};
101
102		gpu_mem: memory@95600000 {
103			reg = <0x0 0x95600000 0x0 0x100000>;
104			no-map;
105		};
106
107		wlan_msa_mem: memory@95700000 {
108			reg = <0x0 0x95700000 0x0 0x100000>;
109			no-map;
110		};
111
112		mdata_mem: mpss-metadata {
113			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
114			size = <0x0 0x4000>;
115			no-map;
116		};
117	};
118
119	clocks {
120		xo: xo-board {
121			compatible = "fixed-clock";
122			#clock-cells = <0>;
123			clock-frequency = <19200000>;
124			clock-output-names = "xo_board";
125		};
126
127		sleep_clk: sleep-clk {
128			compatible = "fixed-clock";
129			#clock-cells = <0>;
130			clock-frequency = <32764>;
131		};
132	};
133
134	cpus {
135		#address-cells = <2>;
136		#size-cells = <0>;
137
138		CPU0: cpu@0 {
139			device_type = "cpu";
140			compatible = "qcom,kryo280";
141			reg = <0x0 0x0>;
142			enable-method = "psci";
143			capacity-dmips-mhz = <1024>;
144			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
145			next-level-cache = <&L2_0>;
146			L2_0: l2-cache {
147				compatible = "cache";
148				cache-level = <2>;
149				cache-unified;
150			};
151		};
152
153		CPU1: cpu@1 {
154			device_type = "cpu";
155			compatible = "qcom,kryo280";
156			reg = <0x0 0x1>;
157			enable-method = "psci";
158			capacity-dmips-mhz = <1024>;
159			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
160			next-level-cache = <&L2_0>;
161		};
162
163		CPU2: cpu@2 {
164			device_type = "cpu";
165			compatible = "qcom,kryo280";
166			reg = <0x0 0x2>;
167			enable-method = "psci";
168			capacity-dmips-mhz = <1024>;
169			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
170			next-level-cache = <&L2_0>;
171		};
172
173		CPU3: cpu@3 {
174			device_type = "cpu";
175			compatible = "qcom,kryo280";
176			reg = <0x0 0x3>;
177			enable-method = "psci";
178			capacity-dmips-mhz = <1024>;
179			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
180			next-level-cache = <&L2_0>;
181		};
182
183		CPU4: cpu@100 {
184			device_type = "cpu";
185			compatible = "qcom,kryo280";
186			reg = <0x0 0x100>;
187			enable-method = "psci";
188			capacity-dmips-mhz = <1536>;
189			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
190			next-level-cache = <&L2_1>;
191			L2_1: l2-cache {
192				compatible = "cache";
193				cache-level = <2>;
194				cache-unified;
195			};
196		};
197
198		CPU5: cpu@101 {
199			device_type = "cpu";
200			compatible = "qcom,kryo280";
201			reg = <0x0 0x101>;
202			enable-method = "psci";
203			capacity-dmips-mhz = <1536>;
204			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
205			next-level-cache = <&L2_1>;
206		};
207
208		CPU6: cpu@102 {
209			device_type = "cpu";
210			compatible = "qcom,kryo280";
211			reg = <0x0 0x102>;
212			enable-method = "psci";
213			capacity-dmips-mhz = <1536>;
214			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
215			next-level-cache = <&L2_1>;
216		};
217
218		CPU7: cpu@103 {
219			device_type = "cpu";
220			compatible = "qcom,kryo280";
221			reg = <0x0 0x103>;
222			enable-method = "psci";
223			capacity-dmips-mhz = <1536>;
224			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
225			next-level-cache = <&L2_1>;
226		};
227
228		cpu-map {
229			cluster0 {
230				core0 {
231					cpu = <&CPU0>;
232				};
233
234				core1 {
235					cpu = <&CPU1>;
236				};
237
238				core2 {
239					cpu = <&CPU2>;
240				};
241
242				core3 {
243					cpu = <&CPU3>;
244				};
245			};
246
247			cluster1 {
248				core0 {
249					cpu = <&CPU4>;
250				};
251
252				core1 {
253					cpu = <&CPU5>;
254				};
255
256				core2 {
257					cpu = <&CPU6>;
258				};
259
260				core3 {
261					cpu = <&CPU7>;
262				};
263			};
264		};
265
266		idle-states {
267			entry-method = "psci";
268
269			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
270				compatible = "arm,idle-state";
271				idle-state-name = "little-retention";
272				/* CPU Retention (C2D), L2 Active */
273				arm,psci-suspend-param = <0x00000002>;
274				entry-latency-us = <81>;
275				exit-latency-us = <86>;
276				min-residency-us = <504>;
277			};
278
279			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
280				compatible = "arm,idle-state";
281				idle-state-name = "little-power-collapse";
282				/* CPU + L2 Power Collapse (C3, D4) */
283				arm,psci-suspend-param = <0x40000003>;
284				entry-latency-us = <814>;
285				exit-latency-us = <4562>;
286				min-residency-us = <9183>;
287				local-timer-stop;
288			};
289
290			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
291				compatible = "arm,idle-state";
292				idle-state-name = "big-retention";
293				/* CPU Retention (C2D), L2 Active */
294				arm,psci-suspend-param = <0x00000002>;
295				entry-latency-us = <79>;
296				exit-latency-us = <82>;
297				min-residency-us = <1302>;
298			};
299
300			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
301				compatible = "arm,idle-state";
302				idle-state-name = "big-power-collapse";
303				/* CPU + L2 Power Collapse (C3, D4) */
304				arm,psci-suspend-param = <0x40000003>;
305				entry-latency-us = <724>;
306				exit-latency-us = <2027>;
307				min-residency-us = <9419>;
308				local-timer-stop;
309			};
310		};
311	};
312
313	firmware {
314		scm {
315			compatible = "qcom,scm-msm8998", "qcom,scm";
316		};
317	};
318
319	dsi_opp_table: opp-table-dsi {
320		compatible = "operating-points-v2";
321
322		opp-131250000 {
323			opp-hz = /bits/ 64 <131250000>;
324			required-opps = <&rpmpd_opp_low_svs>;
325		};
326
327		opp-210000000 {
328			opp-hz = /bits/ 64 <210000000>;
329			required-opps = <&rpmpd_opp_svs>;
330		};
331
332		opp-312500000 {
333			opp-hz = /bits/ 64 <312500000>;
334			required-opps = <&rpmpd_opp_nom>;
335		};
336	};
337
338	psci {
339		compatible = "arm,psci-1.0";
340		method = "smc";
341	};
342
343	rpm: remoteproc {
344		compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
345
346		glink-edge {
347			compatible = "qcom,glink-rpm";
348
349			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
350			qcom,rpm-msg-ram = <&rpm_msg_ram>;
351			mboxes = <&apcs_glb 0>;
352
353			rpm_requests: rpm-requests {
354				compatible = "qcom,rpm-msm8998";
355				qcom,glink-channels = "rpm_requests";
356
357				rpmcc: clock-controller {
358					compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
359					clocks = <&xo>;
360					clock-names = "xo";
361					#clock-cells = <1>;
362				};
363
364				rpmpd: power-controller {
365					compatible = "qcom,msm8998-rpmpd";
366					#power-domain-cells = <1>;
367					operating-points-v2 = <&rpmpd_opp_table>;
368
369					rpmpd_opp_table: opp-table {
370						compatible = "operating-points-v2";
371
372						rpmpd_opp_ret: opp1 {
373							opp-level = <RPM_SMD_LEVEL_RETENTION>;
374						};
375
376						rpmpd_opp_ret_plus: opp2 {
377							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
378						};
379
380						rpmpd_opp_min_svs: opp3 {
381							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
382						};
383
384						rpmpd_opp_low_svs: opp4 {
385							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
386						};
387
388						rpmpd_opp_svs: opp5 {
389							opp-level = <RPM_SMD_LEVEL_SVS>;
390						};
391
392						rpmpd_opp_svs_plus: opp6 {
393							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
394						};
395
396						rpmpd_opp_nom: opp7 {
397							opp-level = <RPM_SMD_LEVEL_NOM>;
398						};
399
400						rpmpd_opp_nom_plus: opp8 {
401							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
402						};
403
404						rpmpd_opp_turbo: opp9 {
405							opp-level = <RPM_SMD_LEVEL_TURBO>;
406						};
407
408						rpmpd_opp_turbo_plus: opp10 {
409							opp-level = <RPM_SMD_LEVEL_BINNING>;
410						};
411					};
412				};
413			};
414		};
415	};
416
417	smem {
418		compatible = "qcom,smem";
419		memory-region = <&smem_mem>;
420		hwlocks = <&tcsr_mutex 3>;
421	};
422
423	smp2p-lpass {
424		compatible = "qcom,smp2p";
425		qcom,smem = <443>, <429>;
426
427		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
428
429		mboxes = <&apcs_glb 10>;
430
431		qcom,local-pid = <0>;
432		qcom,remote-pid = <2>;
433
434		adsp_smp2p_out: master-kernel {
435			qcom,entry-name = "master-kernel";
436			#qcom,smem-state-cells = <1>;
437		};
438
439		adsp_smp2p_in: slave-kernel {
440			qcom,entry-name = "slave-kernel";
441
442			interrupt-controller;
443			#interrupt-cells = <2>;
444		};
445	};
446
447	smp2p-mpss {
448		compatible = "qcom,smp2p";
449		qcom,smem = <435>, <428>;
450		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
451		mboxes = <&apcs_glb 14>;
452		qcom,local-pid = <0>;
453		qcom,remote-pid = <1>;
454
455		modem_smp2p_out: master-kernel {
456			qcom,entry-name = "master-kernel";
457			#qcom,smem-state-cells = <1>;
458		};
459
460		modem_smp2p_in: slave-kernel {
461			qcom,entry-name = "slave-kernel";
462			interrupt-controller;
463			#interrupt-cells = <2>;
464		};
465	};
466
467	smp2p-slpi {
468		compatible = "qcom,smp2p";
469		qcom,smem = <481>, <430>;
470		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
471		mboxes = <&apcs_glb 26>;
472		qcom,local-pid = <0>;
473		qcom,remote-pid = <3>;
474
475		slpi_smp2p_out: master-kernel {
476			qcom,entry-name = "master-kernel";
477			#qcom,smem-state-cells = <1>;
478		};
479
480		slpi_smp2p_in: slave-kernel {
481			qcom,entry-name = "slave-kernel";
482			interrupt-controller;
483			#interrupt-cells = <2>;
484		};
485	};
486
487	thermal-zones {
488		cpu0-thermal {
489			polling-delay-passive = <250>;
490			polling-delay = <1000>;
491
492			thermal-sensors = <&tsens0 1>;
493
494			trips {
495				cpu0_alert0: trip-point0 {
496					temperature = <75000>;
497					hysteresis = <2000>;
498					type = "passive";
499				};
500
501				cpu0_crit: cpu-crit {
502					temperature = <110000>;
503					hysteresis = <2000>;
504					type = "critical";
505				};
506			};
507		};
508
509		cpu1-thermal {
510			polling-delay-passive = <250>;
511			polling-delay = <1000>;
512
513			thermal-sensors = <&tsens0 2>;
514
515			trips {
516				cpu1_alert0: trip-point0 {
517					temperature = <75000>;
518					hysteresis = <2000>;
519					type = "passive";
520				};
521
522				cpu1_crit: cpu-crit {
523					temperature = <110000>;
524					hysteresis = <2000>;
525					type = "critical";
526				};
527			};
528		};
529
530		cpu2-thermal {
531			polling-delay-passive = <250>;
532			polling-delay = <1000>;
533
534			thermal-sensors = <&tsens0 3>;
535
536			trips {
537				cpu2_alert0: trip-point0 {
538					temperature = <75000>;
539					hysteresis = <2000>;
540					type = "passive";
541				};
542
543				cpu2_crit: cpu-crit {
544					temperature = <110000>;
545					hysteresis = <2000>;
546					type = "critical";
547				};
548			};
549		};
550
551		cpu3-thermal {
552			polling-delay-passive = <250>;
553			polling-delay = <1000>;
554
555			thermal-sensors = <&tsens0 4>;
556
557			trips {
558				cpu3_alert0: trip-point0 {
559					temperature = <75000>;
560					hysteresis = <2000>;
561					type = "passive";
562				};
563
564				cpu3_crit: cpu-crit {
565					temperature = <110000>;
566					hysteresis = <2000>;
567					type = "critical";
568				};
569			};
570		};
571
572		cpu4-thermal {
573			polling-delay-passive = <250>;
574			polling-delay = <1000>;
575
576			thermal-sensors = <&tsens0 7>;
577
578			trips {
579				cpu4_alert0: trip-point0 {
580					temperature = <75000>;
581					hysteresis = <2000>;
582					type = "passive";
583				};
584
585				cpu4_crit: cpu-crit {
586					temperature = <110000>;
587					hysteresis = <2000>;
588					type = "critical";
589				};
590			};
591		};
592
593		cpu5-thermal {
594			polling-delay-passive = <250>;
595			polling-delay = <1000>;
596
597			thermal-sensors = <&tsens0 8>;
598
599			trips {
600				cpu5_alert0: trip-point0 {
601					temperature = <75000>;
602					hysteresis = <2000>;
603					type = "passive";
604				};
605
606				cpu5_crit: cpu-crit {
607					temperature = <110000>;
608					hysteresis = <2000>;
609					type = "critical";
610				};
611			};
612		};
613
614		cpu6-thermal {
615			polling-delay-passive = <250>;
616			polling-delay = <1000>;
617
618			thermal-sensors = <&tsens0 9>;
619
620			trips {
621				cpu6_alert0: trip-point0 {
622					temperature = <75000>;
623					hysteresis = <2000>;
624					type = "passive";
625				};
626
627				cpu6_crit: cpu-crit {
628					temperature = <110000>;
629					hysteresis = <2000>;
630					type = "critical";
631				};
632			};
633		};
634
635		cpu7-thermal {
636			polling-delay-passive = <250>;
637			polling-delay = <1000>;
638
639			thermal-sensors = <&tsens0 10>;
640
641			trips {
642				cpu7_alert0: trip-point0 {
643					temperature = <75000>;
644					hysteresis = <2000>;
645					type = "passive";
646				};
647
648				cpu7_crit: cpu-crit {
649					temperature = <110000>;
650					hysteresis = <2000>;
651					type = "critical";
652				};
653			};
654		};
655
656		gpu-bottom-thermal {
657			polling-delay-passive = <250>;
658			polling-delay = <1000>;
659
660			thermal-sensors = <&tsens0 12>;
661
662			trips {
663				gpu1_alert0: trip-point0 {
664					temperature = <90000>;
665					hysteresis = <2000>;
666					type = "hot";
667				};
668			};
669		};
670
671		gpu-top-thermal {
672			polling-delay-passive = <250>;
673			polling-delay = <1000>;
674
675			thermal-sensors = <&tsens0 13>;
676
677			trips {
678				gpu2_alert0: trip-point0 {
679					temperature = <90000>;
680					hysteresis = <2000>;
681					type = "hot";
682				};
683			};
684		};
685
686		clust0-mhm-thermal {
687			polling-delay-passive = <250>;
688			polling-delay = <1000>;
689
690			thermal-sensors = <&tsens0 5>;
691
692			trips {
693				cluster0_mhm_alert0: trip-point0 {
694					temperature = <90000>;
695					hysteresis = <2000>;
696					type = "hot";
697				};
698			};
699		};
700
701		clust1-mhm-thermal {
702			polling-delay-passive = <250>;
703			polling-delay = <1000>;
704
705			thermal-sensors = <&tsens0 6>;
706
707			trips {
708				cluster1_mhm_alert0: trip-point0 {
709					temperature = <90000>;
710					hysteresis = <2000>;
711					type = "hot";
712				};
713			};
714		};
715
716		cluster1-l2-thermal {
717			polling-delay-passive = <250>;
718			polling-delay = <1000>;
719
720			thermal-sensors = <&tsens0 11>;
721
722			trips {
723				cluster1_l2_alert0: trip-point0 {
724					temperature = <90000>;
725					hysteresis = <2000>;
726					type = "hot";
727				};
728			};
729		};
730
731		modem-thermal {
732			polling-delay-passive = <250>;
733			polling-delay = <1000>;
734
735			thermal-sensors = <&tsens1 1>;
736
737			trips {
738				modem_alert0: trip-point0 {
739					temperature = <90000>;
740					hysteresis = <2000>;
741					type = "hot";
742				};
743			};
744		};
745
746		mem-thermal {
747			polling-delay-passive = <250>;
748			polling-delay = <1000>;
749
750			thermal-sensors = <&tsens1 2>;
751
752			trips {
753				mem_alert0: trip-point0 {
754					temperature = <90000>;
755					hysteresis = <2000>;
756					type = "hot";
757				};
758			};
759		};
760
761		wlan-thermal {
762			polling-delay-passive = <250>;
763			polling-delay = <1000>;
764
765			thermal-sensors = <&tsens1 3>;
766
767			trips {
768				wlan_alert0: trip-point0 {
769					temperature = <90000>;
770					hysteresis = <2000>;
771					type = "hot";
772				};
773			};
774		};
775
776		q6-dsp-thermal {
777			polling-delay-passive = <250>;
778			polling-delay = <1000>;
779
780			thermal-sensors = <&tsens1 4>;
781
782			trips {
783				q6_dsp_alert0: trip-point0 {
784					temperature = <90000>;
785					hysteresis = <2000>;
786					type = "hot";
787				};
788			};
789		};
790
791		camera-thermal {
792			polling-delay-passive = <250>;
793			polling-delay = <1000>;
794
795			thermal-sensors = <&tsens1 5>;
796
797			trips {
798				camera_alert0: trip-point0 {
799					temperature = <90000>;
800					hysteresis = <2000>;
801					type = "hot";
802				};
803			};
804		};
805
806		multimedia-thermal {
807			polling-delay-passive = <250>;
808			polling-delay = <1000>;
809
810			thermal-sensors = <&tsens1 6>;
811
812			trips {
813				multimedia_alert0: trip-point0 {
814					temperature = <90000>;
815					hysteresis = <2000>;
816					type = "hot";
817				};
818			};
819		};
820	};
821
822	timer {
823		compatible = "arm,armv8-timer";
824		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
825			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
826			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
827			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
828	};
829
830	soc: soc@0 {
831		#address-cells = <1>;
832		#size-cells = <1>;
833		ranges = <0 0 0 0xffffffff>;
834		compatible = "simple-bus";
835
836		gcc: clock-controller@100000 {
837			compatible = "qcom,gcc-msm8998";
838			#clock-cells = <1>;
839			#reset-cells = <1>;
840			#power-domain-cells = <1>;
841			reg = <0x00100000 0xb0000>;
842
843			clock-names = "xo", "sleep_clk";
844			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
845
846			/*
847			 * The hypervisor typically configures the memory region where these clocks
848			 * reside as read-only for the HLOS. If the HLOS tried to enable or disable
849			 * these clocks on a device with such configuration (e.g. because they are
850			 * enabled but unused during boot-up), the device will most likely decide
851			 * to reboot.
852			 * In light of that, we are conservative here and we list all such clocks
853			 * as protected. The board dts (or a user-supplied dts) can override the
854			 * list of protected clocks if it differs from the norm, and it is in fact
855			 * desired for the HLOS to manage these clocks
856			 */
857			protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
858					   <SSC_XO>,
859					   <SSC_CNOC_AHBS_CLK>;
860		};
861
862		rpm_msg_ram: sram@778000 {
863			compatible = "qcom,rpm-msg-ram";
864			reg = <0x00778000 0x7000>;
865		};
866
867		qfprom: qfprom@784000 {
868			compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
869			reg = <0x00784000 0x621c>;
870			#address-cells = <1>;
871			#size-cells = <1>;
872
873			qusb2_hstx_trim: hstx-trim@23a {
874				reg = <0x23a 0x1>;
875				bits = <0 4>;
876			};
877		};
878
879		tsens0: thermal@10ab000 {
880			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
881			reg = <0x010ab000 0x1000>, /* TM */
882			      <0x010aa000 0x1000>; /* SROT */
883			#qcom,sensors = <14>;
884			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
885				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
886			interrupt-names = "uplow", "critical";
887			#thermal-sensor-cells = <1>;
888		};
889
890		tsens1: thermal@10ae000 {
891			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
892			reg = <0x010ae000 0x1000>, /* TM */
893			      <0x010ad000 0x1000>; /* SROT */
894			#qcom,sensors = <8>;
895			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
896				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
897			interrupt-names = "uplow", "critical";
898			#thermal-sensor-cells = <1>;
899		};
900
901		anoc1_smmu: iommu@1680000 {
902			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
903			reg = <0x01680000 0x10000>;
904			#iommu-cells = <1>;
905
906			#global-interrupts = <0>;
907			interrupts =
908				<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
909				<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
910				<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
911				<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
912				<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
913				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
914		};
915
916		anoc2_smmu: iommu@16c0000 {
917			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
918			reg = <0x016c0000 0x40000>;
919			#iommu-cells = <1>;
920
921			#global-interrupts = <0>;
922			interrupts =
923				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
924				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
925				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
926				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
927				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
928				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
929				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
930				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
931				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
932				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
933		};
934
935		pcie0: pci@1c00000 {
936			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
937			reg = <0x01c00000 0x2000>,
938			      <0x1b000000 0xf1d>,
939			      <0x1b000f20 0xa8>,
940			      <0x1b100000 0x100000>;
941			reg-names = "parf", "dbi", "elbi", "config";
942			device_type = "pci";
943			linux,pci-domain = <0>;
944			bus-range = <0x00 0xff>;
945			#address-cells = <3>;
946			#size-cells = <2>;
947			num-lanes = <1>;
948			phys = <&pciephy>;
949			phy-names = "pciephy";
950			status = "disabled";
951
952			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
953				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
954
955			#interrupt-cells = <1>;
956			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
957			interrupt-names = "msi";
958			interrupt-map-mask = <0 0 0 0x7>;
959			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
960					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
961					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
962					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
963
964			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
965				 <&gcc GCC_PCIE_0_AUX_CLK>,
966				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
967				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
968				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
969			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
970
971			power-domains = <&gcc PCIE_0_GDSC>;
972			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
973			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
974		};
975
976		pcie_phy: phy@1c06000 {
977			compatible = "qcom,msm8998-qmp-pcie-phy";
978			reg = <0x01c06000 0x18c>;
979			#address-cells = <1>;
980			#size-cells = <1>;
981			status = "disabled";
982			ranges;
983
984			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
985				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
986				 <&gcc GCC_PCIE_CLKREF_CLK>;
987			clock-names = "aux", "cfg_ahb", "ref";
988
989			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
990			reset-names = "phy", "common";
991
992			vdda-phy-supply = <&vreg_l1a_0p875>;
993			vdda-pll-supply = <&vreg_l2a_1p2>;
994
995			pciephy: phy@1c06800 {
996				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
997				#phy-cells = <0>;
998
999				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1000				clock-names = "pipe0";
1001				clock-output-names = "pcie_0_pipe_clk_src";
1002				#clock-cells = <0>;
1003			};
1004		};
1005
1006		ufshc: ufshc@1da4000 {
1007			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
1008			reg = <0x01da4000 0x2500>;
1009			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1010			phys = <&ufsphy_lanes>;
1011			phy-names = "ufsphy";
1012			lanes-per-direction = <2>;
1013			power-domains = <&gcc UFS_GDSC>;
1014			status = "disabled";
1015			#reset-cells = <1>;
1016
1017			clock-names =
1018				"core_clk",
1019				"bus_aggr_clk",
1020				"iface_clk",
1021				"core_clk_unipro",
1022				"ref_clk",
1023				"tx_lane0_sync_clk",
1024				"rx_lane0_sync_clk",
1025				"rx_lane1_sync_clk";
1026			clocks =
1027				<&gcc GCC_UFS_AXI_CLK>,
1028				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
1029				<&gcc GCC_UFS_AHB_CLK>,
1030				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
1031				<&rpmcc RPM_SMD_LN_BB_CLK1>,
1032				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
1033				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
1034				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
1035			freq-table-hz =
1036				<50000000 200000000>,
1037				<0 0>,
1038				<0 0>,
1039				<37500000 150000000>,
1040				<0 0>,
1041				<0 0>,
1042				<0 0>,
1043				<0 0>;
1044
1045			resets = <&gcc GCC_UFS_BCR>;
1046			reset-names = "rst";
1047		};
1048
1049		ufsphy: phy@1da7000 {
1050			compatible = "qcom,msm8998-qmp-ufs-phy";
1051			reg = <0x01da7000 0x18c>;
1052			#address-cells = <1>;
1053			#size-cells = <1>;
1054			status = "disabled";
1055			ranges;
1056
1057			clock-names =
1058				"ref",
1059				"ref_aux";
1060			clocks =
1061				<&gcc GCC_UFS_CLKREF_CLK>,
1062				<&gcc GCC_UFS_PHY_AUX_CLK>;
1063
1064			reset-names = "ufsphy";
1065			resets = <&ufshc 0>;
1066
1067			ufsphy_lanes: phy@1da7400 {
1068				reg = <0x01da7400 0x128>,
1069				      <0x01da7600 0x1fc>,
1070				      <0x01da7c00 0x1dc>,
1071				      <0x01da7800 0x128>,
1072				      <0x01da7a00 0x1fc>;
1073				#phy-cells = <0>;
1074			};
1075		};
1076
1077		tcsr_mutex: hwlock@1f40000 {
1078			compatible = "qcom,tcsr-mutex";
1079			reg = <0x01f40000 0x20000>;
1080			#hwlock-cells = <1>;
1081		};
1082
1083		tcsr_regs_1: syscon@1f60000 {
1084			compatible = "qcom,msm8998-tcsr", "syscon";
1085			reg = <0x01f60000 0x20000>;
1086		};
1087
1088		tlmm: pinctrl@3400000 {
1089			compatible = "qcom,msm8998-pinctrl";
1090			reg = <0x03400000 0xc00000>;
1091			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1092			gpio-ranges = <&tlmm 0 0 150>;
1093			gpio-controller;
1094			#gpio-cells = <2>;
1095			interrupt-controller;
1096			#interrupt-cells = <2>;
1097
1098			sdc2_on: sdc2-on-state {
1099				clk-pins {
1100					pins = "sdc2_clk";
1101					drive-strength = <16>;
1102					bias-disable;
1103				};
1104
1105				cmd-pins {
1106					pins = "sdc2_cmd";
1107					drive-strength = <10>;
1108					bias-pull-up;
1109				};
1110
1111				data-pins {
1112					pins = "sdc2_data";
1113					drive-strength = <10>;
1114					bias-pull-up;
1115				};
1116			};
1117
1118			sdc2_off: sdc2-off-state {
1119				clk-pins {
1120					pins = "sdc2_clk";
1121					drive-strength = <2>;
1122					bias-disable;
1123				};
1124
1125				cmd-pins {
1126					pins = "sdc2_cmd";
1127					drive-strength = <2>;
1128					bias-pull-up;
1129				};
1130
1131				data-pins {
1132					pins = "sdc2_data";
1133					drive-strength = <2>;
1134					bias-pull-up;
1135				};
1136			};
1137
1138			sdc2_cd: sdc2-cd-state {
1139				pins = "gpio95";
1140				function = "gpio";
1141				bias-pull-up;
1142				drive-strength = <2>;
1143			};
1144
1145			blsp1_uart3_on: blsp1-uart3-on-state {
1146				tx-pins {
1147					pins = "gpio45";
1148					function = "blsp_uart3_a";
1149					drive-strength = <2>;
1150					bias-disable;
1151				};
1152
1153				rx-pins {
1154					pins = "gpio46";
1155					function = "blsp_uart3_a";
1156					drive-strength = <2>;
1157					bias-disable;
1158				};
1159
1160				cts-pins {
1161					pins = "gpio47";
1162					function = "blsp_uart3_a";
1163					drive-strength = <2>;
1164					bias-disable;
1165				};
1166
1167				rfr-pins {
1168					pins = "gpio48";
1169					function = "blsp_uart3_a";
1170					drive-strength = <2>;
1171					bias-disable;
1172				};
1173			};
1174
1175			blsp1_i2c1_default: blsp1-i2c1-default-state {
1176				pins = "gpio2", "gpio3";
1177				function = "blsp_i2c1";
1178				drive-strength = <2>;
1179				bias-disable;
1180			};
1181
1182			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
1183				pins = "gpio2", "gpio3";
1184				function = "blsp_i2c1";
1185				drive-strength = <2>;
1186				bias-pull-up;
1187			};
1188
1189			blsp1_i2c2_default: blsp1-i2c2-default-state {
1190				pins = "gpio32", "gpio33";
1191				function = "blsp_i2c2";
1192				drive-strength = <2>;
1193				bias-disable;
1194			};
1195
1196			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
1197				pins = "gpio32", "gpio33";
1198				function = "blsp_i2c2";
1199				drive-strength = <2>;
1200				bias-pull-up;
1201			};
1202
1203			blsp1_i2c3_default: blsp1-i2c3-default-state {
1204				pins = "gpio47", "gpio48";
1205				function = "blsp_i2c3";
1206				drive-strength = <2>;
1207				bias-disable;
1208			};
1209
1210			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
1211				pins = "gpio47", "gpio48";
1212				function = "blsp_i2c3";
1213				drive-strength = <2>;
1214				bias-pull-up;
1215			};
1216
1217			blsp1_i2c4_default: blsp1-i2c4-default-state {
1218				pins = "gpio10", "gpio11";
1219				function = "blsp_i2c4";
1220				drive-strength = <2>;
1221				bias-disable;
1222			};
1223
1224			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
1225				pins = "gpio10", "gpio11";
1226				function = "blsp_i2c4";
1227				drive-strength = <2>;
1228				bias-pull-up;
1229			};
1230
1231			blsp1_i2c5_default: blsp1-i2c5-default-state {
1232				pins = "gpio87", "gpio88";
1233				function = "blsp_i2c5";
1234				drive-strength = <2>;
1235				bias-disable;
1236			};
1237
1238			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
1239				pins = "gpio87", "gpio88";
1240				function = "blsp_i2c5";
1241				drive-strength = <2>;
1242				bias-pull-up;
1243			};
1244
1245			blsp1_i2c6_default: blsp1-i2c6-default-state {
1246				pins = "gpio43", "gpio44";
1247				function = "blsp_i2c6";
1248				drive-strength = <2>;
1249				bias-disable;
1250			};
1251
1252			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
1253				pins = "gpio43", "gpio44";
1254				function = "blsp_i2c6";
1255				drive-strength = <2>;
1256				bias-pull-up;
1257			};
1258
1259			blsp1_spi_b_default: blsp1-spi-b-default-state {
1260				pins = "gpio23", "gpio28";
1261				function = "blsp1_spi_b";
1262				drive-strength = <6>;
1263				bias-disable;
1264			};
1265
1266			blsp1_spi1_default: blsp1-spi1-default-state {
1267				pins = "gpio0", "gpio1", "gpio2", "gpio3";
1268				function = "blsp_spi1";
1269				drive-strength = <6>;
1270				bias-disable;
1271			};
1272
1273			blsp1_spi2_default: blsp1-spi2-default-state {
1274				pins = "gpio31", "gpio34", "gpio32", "gpio33";
1275				function = "blsp_spi2";
1276				drive-strength = <6>;
1277				bias-disable;
1278			};
1279
1280			blsp1_spi3_default: blsp1-spi3-default-state {
1281				pins = "gpio45", "gpio46", "gpio47", "gpio48";
1282				function = "blsp_spi2";
1283				drive-strength = <6>;
1284				bias-disable;
1285			};
1286
1287			blsp1_spi4_default: blsp1-spi4-default-state {
1288				pins = "gpio8", "gpio9", "gpio10", "gpio11";
1289				function = "blsp_spi4";
1290				drive-strength = <6>;
1291				bias-disable;
1292			};
1293
1294			blsp1_spi5_default: blsp1-spi5-default-state {
1295				pins = "gpio85", "gpio86", "gpio87", "gpio88";
1296				function = "blsp_spi5";
1297				drive-strength = <6>;
1298				bias-disable;
1299			};
1300
1301			blsp1_spi6_default: blsp1-spi6-default-state {
1302				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1303				function = "blsp_spi6";
1304				drive-strength = <6>;
1305				bias-disable;
1306			};
1307
1308
1309			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
1310			blsp2_i2c1_default: blsp2-i2c1-default-state {
1311				pins = "gpio55", "gpio56";
1312				function = "blsp_i2c7";
1313				drive-strength = <2>;
1314				bias-disable;
1315			};
1316
1317			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
1318				pins = "gpio55", "gpio56";
1319				function = "blsp_i2c7";
1320				drive-strength = <2>;
1321				bias-pull-up;
1322			};
1323
1324			blsp2_i2c2_default: blsp2-i2c2-default-state {
1325				pins = "gpio6", "gpio7";
1326				function = "blsp_i2c8";
1327				drive-strength = <2>;
1328				bias-disable;
1329			};
1330
1331			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
1332				pins = "gpio6", "gpio7";
1333				function = "blsp_i2c8";
1334				drive-strength = <2>;
1335				bias-pull-up;
1336			};
1337
1338			blsp2_i2c3_default: blsp2-i2c3-default-state {
1339				pins = "gpio51", "gpio52";
1340				function = "blsp_i2c9";
1341				drive-strength = <2>;
1342				bias-disable;
1343			};
1344
1345			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
1346				pins = "gpio51", "gpio52";
1347				function = "blsp_i2c9";
1348				drive-strength = <2>;
1349				bias-pull-up;
1350			};
1351
1352			blsp2_i2c4_default: blsp2-i2c4-default-state {
1353				pins = "gpio67", "gpio68";
1354				function = "blsp_i2c10";
1355				drive-strength = <2>;
1356				bias-disable;
1357			};
1358
1359			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
1360				pins = "gpio67", "gpio68";
1361				function = "blsp_i2c10";
1362				drive-strength = <2>;
1363				bias-pull-up;
1364			};
1365
1366			blsp2_i2c5_default: blsp2-i2c5-default-state {
1367				pins = "gpio60", "gpio61";
1368				function = "blsp_i2c11";
1369				drive-strength = <2>;
1370				bias-disable;
1371			};
1372
1373			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
1374				pins = "gpio60", "gpio61";
1375				function = "blsp_i2c11";
1376				drive-strength = <2>;
1377				bias-pull-up;
1378			};
1379
1380			blsp2_i2c6_default: blsp2-i2c6-default-state {
1381				pins = "gpio83", "gpio84";
1382				function = "blsp_i2c12";
1383				drive-strength = <2>;
1384				bias-disable;
1385			};
1386
1387			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
1388				pins = "gpio83", "gpio84";
1389				function = "blsp_i2c12";
1390				drive-strength = <2>;
1391				bias-pull-up;
1392			};
1393
1394			blsp2_spi1_default: blsp2-spi1-default-state {
1395				pins = "gpio53", "gpio54", "gpio55", "gpio56";
1396				function = "blsp_spi7";
1397				drive-strength = <6>;
1398				bias-disable;
1399			};
1400
1401			blsp2_spi2_default: blsp2-spi2-default-state {
1402				pins = "gpio4", "gpio5", "gpio6", "gpio7";
1403				function = "blsp_spi8";
1404				drive-strength = <6>;
1405				bias-disable;
1406			};
1407
1408			blsp2_spi3_default: blsp2-spi3-default-state {
1409				pins = "gpio49", "gpio50", "gpio51", "gpio52";
1410				function = "blsp_spi9";
1411				drive-strength = <6>;
1412				bias-disable;
1413			};
1414
1415			blsp2_spi4_default: blsp2-spi4-default-state {
1416				pins = "gpio65", "gpio66", "gpio67", "gpio68";
1417				function = "blsp_spi10";
1418				drive-strength = <6>;
1419				bias-disable;
1420			};
1421
1422			blsp2_spi5_default: blsp2-spi5-default-state {
1423				pins = "gpio58", "gpio59", "gpio60", "gpio61";
1424				function = "blsp_spi11";
1425				drive-strength = <6>;
1426				bias-disable;
1427			};
1428
1429			blsp2_spi6_default: blsp2-spi6-default-state {
1430				pins = "gpio81", "gpio82", "gpio83", "gpio84";
1431				function = "blsp_spi12";
1432				drive-strength = <6>;
1433				bias-disable;
1434			};
1435		};
1436
1437		remoteproc_mss: remoteproc@4080000 {
1438			compatible = "qcom,msm8998-mss-pil";
1439			reg = <0x04080000 0x100>, <0x04180000 0x20>;
1440			reg-names = "qdsp6", "rmb";
1441
1442			interrupts-extended =
1443				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
1444				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1445				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1446				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1447				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1448				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1449			interrupt-names = "wdog", "fatal", "ready",
1450					  "handover", "stop-ack",
1451					  "shutdown-ack";
1452
1453			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1454				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
1455				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1456				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
1457				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
1458				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
1459				 <&rpmcc RPM_SMD_QDSS_CLK>,
1460				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1461			clock-names = "iface", "bus", "mem", "gpll0_mss",
1462				      "snoc_axi", "mnoc_axi", "qdss", "xo";
1463
1464			qcom,smem-states = <&modem_smp2p_out 0>;
1465			qcom,smem-state-names = "stop";
1466
1467			resets = <&gcc GCC_MSS_RESTART>;
1468			reset-names = "mss_restart";
1469
1470			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
1471
1472			power-domains = <&rpmpd MSM8998_VDDCX>,
1473					<&rpmpd MSM8998_VDDMX>;
1474			power-domain-names = "cx", "mx";
1475
1476			status = "disabled";
1477
1478			mba {
1479				memory-region = <&mba_mem>;
1480			};
1481
1482			mpss {
1483				memory-region = <&mpss_mem>;
1484			};
1485
1486			metadata {
1487				memory-region = <&mdata_mem>;
1488			};
1489
1490			glink-edge {
1491				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
1492				label = "modem";
1493				qcom,remote-pid = <1>;
1494				mboxes = <&apcs_glb 15>;
1495			};
1496		};
1497
1498		adreno_gpu: gpu@5000000 {
1499			compatible = "qcom,adreno-540.1", "qcom,adreno";
1500			reg = <0x05000000 0x40000>;
1501			reg-names = "kgsl_3d0_reg_memory";
1502
1503			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1504				<&gpucc RBBMTIMER_CLK>,
1505				<&gcc GCC_BIMC_GFX_CLK>,
1506				<&gcc GCC_GPU_BIMC_GFX_CLK>,
1507				<&gpucc RBCPR_CLK>,
1508				<&gpucc GFX3D_CLK>;
1509			clock-names = "iface",
1510				"rbbmtimer",
1511				"mem",
1512				"mem_iface",
1513				"rbcpr",
1514				"core";
1515
1516			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
1517			iommus = <&adreno_smmu 0>;
1518			operating-points-v2 = <&gpu_opp_table>;
1519			power-domains = <&rpmpd MSM8998_VDDMX>;
1520			status = "disabled";
1521
1522			gpu_opp_table: opp-table {
1523				compatible = "operating-points-v2";
1524				opp-710000097 {
1525					opp-hz = /bits/ 64 <710000097>;
1526					opp-level = <RPM_SMD_LEVEL_TURBO>;
1527					opp-supported-hw = <0xff>;
1528				};
1529
1530				opp-670000048 {
1531					opp-hz = /bits/ 64 <670000048>;
1532					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
1533					opp-supported-hw = <0xff>;
1534				};
1535
1536				opp-596000097 {
1537					opp-hz = /bits/ 64 <596000097>;
1538					opp-level = <RPM_SMD_LEVEL_NOM>;
1539					opp-supported-hw = <0xff>;
1540				};
1541
1542				opp-515000097 {
1543					opp-hz = /bits/ 64 <515000097>;
1544					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
1545					opp-supported-hw = <0xff>;
1546				};
1547
1548				opp-414000000 {
1549					opp-hz = /bits/ 64 <414000000>;
1550					opp-level = <RPM_SMD_LEVEL_SVS>;
1551					opp-supported-hw = <0xff>;
1552				};
1553
1554				opp-342000000 {
1555					opp-hz = /bits/ 64 <342000000>;
1556					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
1557					opp-supported-hw = <0xff>;
1558				};
1559
1560				opp-257000000 {
1561					opp-hz = /bits/ 64 <257000000>;
1562					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
1563					opp-supported-hw = <0xff>;
1564				};
1565			};
1566		};
1567
1568		adreno_smmu: iommu@5040000 {
1569			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
1570			reg = <0x05040000 0x10000>;
1571			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1572				 <&gcc GCC_BIMC_GFX_CLK>,
1573				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
1574			clock-names = "iface", "mem", "mem_iface";
1575
1576			#global-interrupts = <0>;
1577			#iommu-cells = <1>;
1578			interrupts =
1579				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1580				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
1581				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1582			/*
1583			 * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
1584			 * GPU-CX for SMMU but we need both of them up for Adreno.
1585			 * Contemporarily, we also need to manage the VDDMX rpmpd
1586			 * domain in the Adreno driver.
1587			 * Enable GPU CX/GX GDSCs here so that we can manage the
1588			 * SoC VDDMX RPM Power Domain in the Adreno driver.
1589			 */
1590			power-domains = <&gpucc GPU_GX_GDSC>;
1591			status = "disabled";
1592		};
1593
1594		gpucc: clock-controller@5065000 {
1595			compatible = "qcom,msm8998-gpucc";
1596			#clock-cells = <1>;
1597			#reset-cells = <1>;
1598			#power-domain-cells = <1>;
1599			reg = <0x05065000 0x9000>;
1600
1601			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1602				 <&gcc GCC_GPU_GPLL0_CLK>;
1603			clock-names = "xo",
1604				      "gpll0";
1605		};
1606
1607		remoteproc_slpi: remoteproc@5800000 {
1608			compatible = "qcom,msm8998-slpi-pas";
1609			reg = <0x05800000 0x4040>;
1610
1611			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
1612					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1613					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1614					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1615					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1616			interrupt-names = "wdog", "fatal", "ready",
1617					  "handover", "stop-ack";
1618
1619			px-supply = <&vreg_lvs2a_1p8>;
1620
1621			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1622				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
1623			clock-names = "xo", "aggre2";
1624
1625			memory-region = <&slpi_mem>;
1626
1627			qcom,smem-states = <&slpi_smp2p_out 0>;
1628			qcom,smem-state-names = "stop";
1629
1630			power-domains = <&rpmpd MSM8998_SSCCX>;
1631			power-domain-names = "ssc_cx";
1632
1633			status = "disabled";
1634
1635			glink-edge {
1636				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
1637				label = "dsps";
1638				qcom,remote-pid = <3>;
1639				mboxes = <&apcs_glb 27>;
1640			};
1641		};
1642
1643		stm: stm@6002000 {
1644			compatible = "arm,coresight-stm", "arm,primecell";
1645			reg = <0x06002000 0x1000>,
1646			      <0x16280000 0x180000>;
1647			reg-names = "stm-base", "stm-stimulus-base";
1648			status = "disabled";
1649
1650			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1651			clock-names = "apb_pclk", "atclk";
1652
1653			out-ports {
1654				port {
1655					stm_out: endpoint {
1656						remote-endpoint = <&funnel0_in7>;
1657					};
1658				};
1659			};
1660		};
1661
1662		funnel1: funnel@6041000 {
1663			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1664			reg = <0x06041000 0x1000>;
1665			status = "disabled";
1666
1667			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1668			clock-names = "apb_pclk", "atclk";
1669
1670			out-ports {
1671				port {
1672					funnel0_out: endpoint {
1673						remote-endpoint =
1674						  <&merge_funnel_in0>;
1675					};
1676				};
1677			};
1678
1679			in-ports {
1680				#address-cells = <1>;
1681				#size-cells = <0>;
1682
1683				port@7 {
1684					reg = <7>;
1685					funnel0_in7: endpoint {
1686						remote-endpoint = <&stm_out>;
1687					};
1688				};
1689			};
1690		};
1691
1692		funnel2: funnel@6042000 {
1693			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1694			reg = <0x06042000 0x1000>;
1695			status = "disabled";
1696
1697			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1698			clock-names = "apb_pclk", "atclk";
1699
1700			out-ports {
1701				port {
1702					funnel1_out: endpoint {
1703						remote-endpoint =
1704						  <&merge_funnel_in1>;
1705					};
1706				};
1707			};
1708
1709			in-ports {
1710				#address-cells = <1>;
1711				#size-cells = <0>;
1712
1713				port@6 {
1714					reg = <6>;
1715					funnel1_in6: endpoint {
1716						remote-endpoint =
1717						  <&apss_merge_funnel_out>;
1718					};
1719				};
1720			};
1721		};
1722
1723		funnel3: funnel@6045000 {
1724			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1725			reg = <0x06045000 0x1000>;
1726			status = "disabled";
1727
1728			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1729			clock-names = "apb_pclk", "atclk";
1730
1731			out-ports {
1732				port {
1733					merge_funnel_out: endpoint {
1734						remote-endpoint =
1735						  <&etf_in>;
1736					};
1737				};
1738			};
1739
1740			in-ports {
1741				#address-cells = <1>;
1742				#size-cells = <0>;
1743
1744				port@0 {
1745					reg = <0>;
1746					merge_funnel_in0: endpoint {
1747						remote-endpoint =
1748						  <&funnel0_out>;
1749					};
1750				};
1751
1752				port@1 {
1753					reg = <1>;
1754					merge_funnel_in1: endpoint {
1755						remote-endpoint =
1756						  <&funnel1_out>;
1757					};
1758				};
1759			};
1760		};
1761
1762		replicator1: replicator@6046000 {
1763			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1764			reg = <0x06046000 0x1000>;
1765			status = "disabled";
1766
1767			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1768			clock-names = "apb_pclk", "atclk";
1769
1770			out-ports {
1771				port {
1772					replicator_out: endpoint {
1773						remote-endpoint = <&etr_in>;
1774					};
1775				};
1776			};
1777
1778			in-ports {
1779				port {
1780					replicator_in: endpoint {
1781						remote-endpoint = <&etf_out>;
1782					};
1783				};
1784			};
1785		};
1786
1787		etf: etf@6047000 {
1788			compatible = "arm,coresight-tmc", "arm,primecell";
1789			reg = <0x06047000 0x1000>;
1790			status = "disabled";
1791
1792			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1793			clock-names = "apb_pclk", "atclk";
1794
1795			out-ports {
1796				port {
1797					etf_out: endpoint {
1798						remote-endpoint =
1799						  <&replicator_in>;
1800					};
1801				};
1802			};
1803
1804			in-ports {
1805				port {
1806					etf_in: endpoint {
1807						remote-endpoint =
1808						  <&merge_funnel_out>;
1809					};
1810				};
1811			};
1812		};
1813
1814		etr: etr@6048000 {
1815			compatible = "arm,coresight-tmc", "arm,primecell";
1816			reg = <0x06048000 0x1000>;
1817			status = "disabled";
1818
1819			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1820			clock-names = "apb_pclk", "atclk";
1821			arm,scatter-gather;
1822
1823			in-ports {
1824				port {
1825					etr_in: endpoint {
1826						remote-endpoint =
1827						  <&replicator_out>;
1828					};
1829				};
1830			};
1831		};
1832
1833		etm1: etm@7840000 {
1834			compatible = "arm,coresight-etm4x", "arm,primecell";
1835			reg = <0x07840000 0x1000>;
1836			status = "disabled";
1837
1838			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1839			clock-names = "apb_pclk", "atclk";
1840
1841			cpu = <&CPU0>;
1842
1843			out-ports {
1844				port {
1845					etm0_out: endpoint {
1846						remote-endpoint =
1847						  <&apss_funnel_in0>;
1848					};
1849				};
1850			};
1851		};
1852
1853		etm2: etm@7940000 {
1854			compatible = "arm,coresight-etm4x", "arm,primecell";
1855			reg = <0x07940000 0x1000>;
1856			status = "disabled";
1857
1858			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1859			clock-names = "apb_pclk", "atclk";
1860
1861			cpu = <&CPU1>;
1862
1863			out-ports {
1864				port {
1865					etm1_out: endpoint {
1866						remote-endpoint =
1867						  <&apss_funnel_in1>;
1868					};
1869				};
1870			};
1871		};
1872
1873		etm3: etm@7a40000 {
1874			compatible = "arm,coresight-etm4x", "arm,primecell";
1875			reg = <0x07a40000 0x1000>;
1876			status = "disabled";
1877
1878			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1879			clock-names = "apb_pclk", "atclk";
1880
1881			cpu = <&CPU2>;
1882
1883			out-ports {
1884				port {
1885					etm2_out: endpoint {
1886						remote-endpoint =
1887						  <&apss_funnel_in2>;
1888					};
1889				};
1890			};
1891		};
1892
1893		etm4: etm@7b40000 {
1894			compatible = "arm,coresight-etm4x", "arm,primecell";
1895			reg = <0x07b40000 0x1000>;
1896			status = "disabled";
1897
1898			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1899			clock-names = "apb_pclk", "atclk";
1900
1901			cpu = <&CPU3>;
1902
1903			out-ports {
1904				port {
1905					etm3_out: endpoint {
1906						remote-endpoint =
1907						  <&apss_funnel_in3>;
1908					};
1909				};
1910			};
1911		};
1912
1913		funnel4: funnel@7b60000 { /* APSS Funnel */
1914			compatible = "arm,coresight-etm4x", "arm,primecell";
1915			reg = <0x07b60000 0x1000>;
1916			status = "disabled";
1917
1918			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1919			clock-names = "apb_pclk", "atclk";
1920
1921			out-ports {
1922				port {
1923					apss_funnel_out: endpoint {
1924						remote-endpoint =
1925						  <&apss_merge_funnel_in>;
1926					};
1927				};
1928			};
1929
1930			in-ports {
1931				#address-cells = <1>;
1932				#size-cells = <0>;
1933
1934				port@0 {
1935					reg = <0>;
1936					apss_funnel_in0: endpoint {
1937						remote-endpoint =
1938						  <&etm0_out>;
1939					};
1940				};
1941
1942				port@1 {
1943					reg = <1>;
1944					apss_funnel_in1: endpoint {
1945						remote-endpoint =
1946						  <&etm1_out>;
1947					};
1948				};
1949
1950				port@2 {
1951					reg = <2>;
1952					apss_funnel_in2: endpoint {
1953						remote-endpoint =
1954						  <&etm2_out>;
1955					};
1956				};
1957
1958				port@3 {
1959					reg = <3>;
1960					apss_funnel_in3: endpoint {
1961						remote-endpoint =
1962						  <&etm3_out>;
1963					};
1964				};
1965
1966				port@4 {
1967					reg = <4>;
1968					apss_funnel_in4: endpoint {
1969						remote-endpoint =
1970						  <&etm4_out>;
1971					};
1972				};
1973
1974				port@5 {
1975					reg = <5>;
1976					apss_funnel_in5: endpoint {
1977						remote-endpoint =
1978						  <&etm5_out>;
1979					};
1980				};
1981
1982				port@6 {
1983					reg = <6>;
1984					apss_funnel_in6: endpoint {
1985						remote-endpoint =
1986						  <&etm6_out>;
1987					};
1988				};
1989
1990				port@7 {
1991					reg = <7>;
1992					apss_funnel_in7: endpoint {
1993						remote-endpoint =
1994						  <&etm7_out>;
1995					};
1996				};
1997			};
1998		};
1999
2000		funnel5: funnel@7b70000 {
2001			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2002			reg = <0x07b70000 0x1000>;
2003			status = "disabled";
2004
2005			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2006			clock-names = "apb_pclk", "atclk";
2007
2008			out-ports {
2009				port {
2010					apss_merge_funnel_out: endpoint {
2011						remote-endpoint =
2012						  <&funnel1_in6>;
2013					};
2014				};
2015			};
2016
2017			in-ports {
2018				port {
2019					apss_merge_funnel_in: endpoint {
2020						remote-endpoint =
2021						  <&apss_funnel_out>;
2022					};
2023				};
2024			};
2025		};
2026
2027		etm5: etm@7c40000 {
2028			compatible = "arm,coresight-etm4x", "arm,primecell";
2029			reg = <0x07c40000 0x1000>;
2030			status = "disabled";
2031
2032			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2033			clock-names = "apb_pclk", "atclk";
2034
2035			cpu = <&CPU4>;
2036
2037			out-ports {
2038				port {
2039					etm4_out: endpoint {
2040						remote-endpoint = <&apss_funnel_in4>;
2041					};
2042				};
2043			};
2044		};
2045
2046		etm6: etm@7d40000 {
2047			compatible = "arm,coresight-etm4x", "arm,primecell";
2048			reg = <0x07d40000 0x1000>;
2049			status = "disabled";
2050
2051			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2052			clock-names = "apb_pclk", "atclk";
2053
2054			cpu = <&CPU5>;
2055
2056			out-ports {
2057				port {
2058					etm5_out: endpoint {
2059						remote-endpoint = <&apss_funnel_in5>;
2060					};
2061				};
2062			};
2063		};
2064
2065		etm7: etm@7e40000 {
2066			compatible = "arm,coresight-etm4x", "arm,primecell";
2067			reg = <0x07e40000 0x1000>;
2068			status = "disabled";
2069
2070			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2071			clock-names = "apb_pclk", "atclk";
2072
2073			cpu = <&CPU6>;
2074
2075			out-ports {
2076				port {
2077					etm6_out: endpoint {
2078						remote-endpoint = <&apss_funnel_in6>;
2079					};
2080				};
2081			};
2082		};
2083
2084		etm8: etm@7f40000 {
2085			compatible = "arm,coresight-etm4x", "arm,primecell";
2086			reg = <0x07f40000 0x1000>;
2087			status = "disabled";
2088
2089			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2090			clock-names = "apb_pclk", "atclk";
2091
2092			cpu = <&CPU7>;
2093
2094			out-ports {
2095				port {
2096					etm7_out: endpoint {
2097						remote-endpoint = <&apss_funnel_in7>;
2098					};
2099				};
2100			};
2101		};
2102
2103		sram@290000 {
2104			compatible = "qcom,rpm-stats";
2105			reg = <0x00290000 0x10000>;
2106		};
2107
2108		spmi_bus: spmi@800f000 {
2109			compatible = "qcom,spmi-pmic-arb";
2110			reg = <0x0800f000 0x1000>,
2111			      <0x08400000 0x1000000>,
2112			      <0x09400000 0x1000000>,
2113			      <0x0a400000 0x220000>,
2114			      <0x0800a000 0x3000>;
2115			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2116			interrupt-names = "periph_irq";
2117			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
2118			qcom,ee = <0>;
2119			qcom,channel = <0>;
2120			#address-cells = <2>;
2121			#size-cells = <0>;
2122			interrupt-controller;
2123			#interrupt-cells = <4>;
2124		};
2125
2126		usb3: usb@a8f8800 {
2127			compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
2128			reg = <0x0a8f8800 0x400>;
2129			status = "disabled";
2130			#address-cells = <1>;
2131			#size-cells = <1>;
2132			ranges;
2133
2134			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
2135				 <&gcc GCC_USB30_MASTER_CLK>,
2136				 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
2137				 <&gcc GCC_USB30_SLEEP_CLK>,
2138				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
2139			clock-names = "cfg_noc",
2140				      "core",
2141				      "iface",
2142				      "sleep",
2143				      "mock_utmi";
2144
2145			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2146					  <&gcc GCC_USB30_MASTER_CLK>;
2147			assigned-clock-rates = <19200000>, <120000000>;
2148
2149			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
2150				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2151			interrupt-names = "hs_phy_irq", "ss_phy_irq";
2152
2153			power-domains = <&gcc USB_30_GDSC>;
2154
2155			resets = <&gcc GCC_USB_30_BCR>;
2156
2157			usb3_dwc3: usb@a800000 {
2158				compatible = "snps,dwc3";
2159				reg = <0x0a800000 0xcd00>;
2160				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
2161				snps,dis_u2_susphy_quirk;
2162				snps,dis_enblslpm_quirk;
2163				phys = <&qusb2phy>, <&usb1_ssphy>;
2164				phy-names = "usb2-phy", "usb3-phy";
2165				snps,has-lpm-erratum;
2166				snps,hird-threshold = /bits/ 8 <0x10>;
2167			};
2168		};
2169
2170		usb3phy: phy@c010000 {
2171			compatible = "qcom,msm8998-qmp-usb3-phy";
2172			reg = <0x0c010000 0x18c>;
2173			status = "disabled";
2174			#address-cells = <1>;
2175			#size-cells = <1>;
2176			ranges;
2177
2178			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
2179				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2180				 <&gcc GCC_USB3_CLKREF_CLK>;
2181			clock-names = "aux", "cfg_ahb", "ref";
2182
2183			resets = <&gcc GCC_USB3_PHY_BCR>,
2184				 <&gcc GCC_USB3PHY_PHY_BCR>;
2185			reset-names = "phy", "common";
2186
2187			usb1_ssphy: phy@c010200 {
2188				reg = <0xc010200 0x128>,
2189				      <0xc010400 0x200>,
2190				      <0xc010c00 0x20c>,
2191				      <0xc010600 0x128>,
2192				      <0xc010800 0x200>;
2193				#phy-cells = <0>;
2194				#clock-cells = <0>;
2195				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
2196				clock-names = "pipe0";
2197				clock-output-names = "usb3_phy_pipe_clk_src";
2198			};
2199		};
2200
2201		qusb2phy: phy@c012000 {
2202			compatible = "qcom,msm8998-qusb2-phy";
2203			reg = <0x0c012000 0x2a8>;
2204			status = "disabled";
2205			#phy-cells = <0>;
2206
2207			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2208				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
2209			clock-names = "cfg_ahb", "ref";
2210
2211			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2212
2213			nvmem-cells = <&qusb2_hstx_trim>;
2214		};
2215
2216		sdhc2: mmc@c0a4900 {
2217			compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
2218			reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
2219			reg-names = "hc", "core";
2220
2221			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
2222				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
2223			interrupt-names = "hc_irq", "pwr_irq";
2224
2225			clock-names = "iface", "core", "xo";
2226			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2227				 <&gcc GCC_SDCC2_APPS_CLK>,
2228				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2229			bus-width = <4>;
2230			status = "disabled";
2231		};
2232
2233		blsp1_dma: dma-controller@c144000 {
2234			compatible = "qcom,bam-v1.7.0";
2235			reg = <0x0c144000 0x25000>;
2236			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
2237			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
2238			clock-names = "bam_clk";
2239			#dma-cells = <1>;
2240			qcom,ee = <0>;
2241			qcom,controlled-remotely;
2242			num-channels = <18>;
2243			qcom,num-ees = <4>;
2244		};
2245
2246		blsp1_uart3: serial@c171000 {
2247			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2248			reg = <0x0c171000 0x1000>;
2249			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
2250			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
2251				 <&gcc GCC_BLSP1_AHB_CLK>;
2252			clock-names = "core", "iface";
2253			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
2254			dma-names = "tx", "rx";
2255			pinctrl-names = "default";
2256			pinctrl-0 = <&blsp1_uart3_on>;
2257			status = "disabled";
2258		};
2259
2260		blsp1_i2c1: i2c@c175000 {
2261			compatible = "qcom,i2c-qup-v2.2.1";
2262			reg = <0x0c175000 0x600>;
2263			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2264
2265			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
2266				 <&gcc GCC_BLSP1_AHB_CLK>;
2267			clock-names = "core", "iface";
2268			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2269			dma-names = "tx", "rx";
2270			pinctrl-names = "default", "sleep";
2271			pinctrl-0 = <&blsp1_i2c1_default>;
2272			pinctrl-1 = <&blsp1_i2c1_sleep>;
2273			clock-frequency = <400000>;
2274
2275			status = "disabled";
2276			#address-cells = <1>;
2277			#size-cells = <0>;
2278		};
2279
2280		blsp1_i2c2: i2c@c176000 {
2281			compatible = "qcom,i2c-qup-v2.2.1";
2282			reg = <0x0c176000 0x600>;
2283			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2284
2285			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
2286				 <&gcc GCC_BLSP1_AHB_CLK>;
2287			clock-names = "core", "iface";
2288			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2289			dma-names = "tx", "rx";
2290			pinctrl-names = "default", "sleep";
2291			pinctrl-0 = <&blsp1_i2c2_default>;
2292			pinctrl-1 = <&blsp1_i2c2_sleep>;
2293			clock-frequency = <400000>;
2294
2295			status = "disabled";
2296			#address-cells = <1>;
2297			#size-cells = <0>;
2298		};
2299
2300		blsp1_i2c3: i2c@c177000 {
2301			compatible = "qcom,i2c-qup-v2.2.1";
2302			reg = <0x0c177000 0x600>;
2303			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2304
2305			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
2306				 <&gcc GCC_BLSP1_AHB_CLK>;
2307			clock-names = "core", "iface";
2308			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2309			dma-names = "tx", "rx";
2310			pinctrl-names = "default", "sleep";
2311			pinctrl-0 = <&blsp1_i2c3_default>;
2312			pinctrl-1 = <&blsp1_i2c3_sleep>;
2313			clock-frequency = <400000>;
2314
2315			status = "disabled";
2316			#address-cells = <1>;
2317			#size-cells = <0>;
2318		};
2319
2320		blsp1_i2c4: i2c@c178000 {
2321			compatible = "qcom,i2c-qup-v2.2.1";
2322			reg = <0x0c178000 0x600>;
2323			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2324
2325			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
2326				 <&gcc GCC_BLSP1_AHB_CLK>;
2327			clock-names = "core", "iface";
2328			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2329			dma-names = "tx", "rx";
2330			pinctrl-names = "default", "sleep";
2331			pinctrl-0 = <&blsp1_i2c4_default>;
2332			pinctrl-1 = <&blsp1_i2c4_sleep>;
2333			clock-frequency = <400000>;
2334
2335			status = "disabled";
2336			#address-cells = <1>;
2337			#size-cells = <0>;
2338		};
2339
2340		blsp1_i2c5: i2c@c179000 {
2341			compatible = "qcom,i2c-qup-v2.2.1";
2342			reg = <0x0c179000 0x600>;
2343			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2344
2345			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
2346				 <&gcc GCC_BLSP1_AHB_CLK>;
2347			clock-names = "core", "iface";
2348			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2349			dma-names = "tx", "rx";
2350			pinctrl-names = "default", "sleep";
2351			pinctrl-0 = <&blsp1_i2c5_default>;
2352			pinctrl-1 = <&blsp1_i2c5_sleep>;
2353			clock-frequency = <400000>;
2354
2355			status = "disabled";
2356			#address-cells = <1>;
2357			#size-cells = <0>;
2358		};
2359
2360		blsp1_i2c6: i2c@c17a000 {
2361			compatible = "qcom,i2c-qup-v2.2.1";
2362			reg = <0x0c17a000 0x600>;
2363			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2364
2365			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
2366				 <&gcc GCC_BLSP1_AHB_CLK>;
2367			clock-names = "core", "iface";
2368			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2369			dma-names = "tx", "rx";
2370			pinctrl-names = "default", "sleep";
2371			pinctrl-0 = <&blsp1_i2c6_default>;
2372			pinctrl-1 = <&blsp1_i2c6_sleep>;
2373			clock-frequency = <400000>;
2374
2375			status = "disabled";
2376			#address-cells = <1>;
2377			#size-cells = <0>;
2378		};
2379
2380		blsp1_spi1: spi@c175000 {
2381			compatible = "qcom,spi-qup-v2.2.1";
2382			reg = <0x0c175000 0x600>;
2383			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2384
2385			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
2386				 <&gcc GCC_BLSP1_AHB_CLK>;
2387			clock-names = "core", "iface";
2388			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2389			dma-names = "tx", "rx";
2390			pinctrl-names = "default";
2391			pinctrl-0 = <&blsp1_spi1_default>;
2392
2393			status = "disabled";
2394			#address-cells = <1>;
2395			#size-cells = <0>;
2396		};
2397
2398		blsp1_spi2: spi@c176000 {
2399			compatible = "qcom,spi-qup-v2.2.1";
2400			reg = <0x0c176000 0x600>;
2401			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2402
2403			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
2404				 <&gcc GCC_BLSP1_AHB_CLK>;
2405			clock-names = "core", "iface";
2406			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2407			dma-names = "tx", "rx";
2408			pinctrl-names = "default";
2409			pinctrl-0 = <&blsp1_spi2_default>;
2410
2411			status = "disabled";
2412			#address-cells = <1>;
2413			#size-cells = <0>;
2414		};
2415
2416		blsp1_spi3: spi@c177000 {
2417			compatible = "qcom,spi-qup-v2.2.1";
2418			reg = <0x0c177000 0x600>;
2419			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2420
2421			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
2422				 <&gcc GCC_BLSP1_AHB_CLK>;
2423			clock-names = "core", "iface";
2424			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2425			dma-names = "tx", "rx";
2426			pinctrl-names = "default";
2427			pinctrl-0 = <&blsp1_spi3_default>;
2428
2429			status = "disabled";
2430			#address-cells = <1>;
2431			#size-cells = <0>;
2432		};
2433
2434		blsp1_spi4: spi@c178000 {
2435			compatible = "qcom,spi-qup-v2.2.1";
2436			reg = <0x0c178000 0x600>;
2437			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2438
2439			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
2440				 <&gcc GCC_BLSP1_AHB_CLK>;
2441			clock-names = "core", "iface";
2442			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2443			dma-names = "tx", "rx";
2444			pinctrl-names = "default";
2445			pinctrl-0 = <&blsp1_spi4_default>;
2446
2447			status = "disabled";
2448			#address-cells = <1>;
2449			#size-cells = <0>;
2450		};
2451
2452		blsp1_spi5: spi@c179000 {
2453			compatible = "qcom,spi-qup-v2.2.1";
2454			reg = <0x0c179000 0x600>;
2455			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2456
2457			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
2458				 <&gcc GCC_BLSP1_AHB_CLK>;
2459			clock-names = "core", "iface";
2460			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2461			dma-names = "tx", "rx";
2462			pinctrl-names = "default";
2463			pinctrl-0 = <&blsp1_spi5_default>;
2464
2465			status = "disabled";
2466			#address-cells = <1>;
2467			#size-cells = <0>;
2468		};
2469
2470		blsp1_spi6: spi@c17a000 {
2471			compatible = "qcom,spi-qup-v2.2.1";
2472			reg = <0x0c17a000 0x600>;
2473			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2474
2475			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
2476				 <&gcc GCC_BLSP1_AHB_CLK>;
2477			clock-names = "core", "iface";
2478			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2479			dma-names = "tx", "rx";
2480			pinctrl-names = "default";
2481			pinctrl-0 = <&blsp1_spi6_default>;
2482
2483			status = "disabled";
2484			#address-cells = <1>;
2485			#size-cells = <0>;
2486		};
2487
2488		blsp2_dma: dma-controller@c184000 {
2489			compatible = "qcom,bam-v1.7.0";
2490			reg = <0x0c184000 0x25000>;
2491			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
2492			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
2493			clock-names = "bam_clk";
2494			#dma-cells = <1>;
2495			qcom,ee = <0>;
2496			qcom,controlled-remotely;
2497			num-channels = <18>;
2498			qcom,num-ees = <4>;
2499		};
2500
2501		blsp2_uart1: serial@c1b0000 {
2502			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2503			reg = <0x0c1b0000 0x1000>;
2504			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2505			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2506				 <&gcc GCC_BLSP2_AHB_CLK>;
2507			clock-names = "core", "iface";
2508			status = "disabled";
2509		};
2510
2511		blsp2_i2c1: i2c@c1b5000 {
2512			compatible = "qcom,i2c-qup-v2.2.1";
2513			reg = <0x0c1b5000 0x600>;
2514			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2515
2516			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
2517				 <&gcc GCC_BLSP2_AHB_CLK>;
2518			clock-names = "core", "iface";
2519			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2520			dma-names = "tx", "rx";
2521			pinctrl-names = "default", "sleep";
2522			pinctrl-0 = <&blsp2_i2c1_default>;
2523			pinctrl-1 = <&blsp2_i2c1_sleep>;
2524			clock-frequency = <400000>;
2525
2526			status = "disabled";
2527			#address-cells = <1>;
2528			#size-cells = <0>;
2529		};
2530
2531		blsp2_i2c2: i2c@c1b6000 {
2532			compatible = "qcom,i2c-qup-v2.2.1";
2533			reg = <0x0c1b6000 0x600>;
2534			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2535
2536			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
2537				 <&gcc GCC_BLSP2_AHB_CLK>;
2538			clock-names = "core", "iface";
2539			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2540			dma-names = "tx", "rx";
2541			pinctrl-names = "default", "sleep";
2542			pinctrl-0 = <&blsp2_i2c2_default>;
2543			pinctrl-1 = <&blsp2_i2c2_sleep>;
2544			clock-frequency = <400000>;
2545
2546			status = "disabled";
2547			#address-cells = <1>;
2548			#size-cells = <0>;
2549		};
2550
2551		blsp2_i2c3: i2c@c1b7000 {
2552			compatible = "qcom,i2c-qup-v2.2.1";
2553			reg = <0x0c1b7000 0x600>;
2554			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2555
2556			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
2557				 <&gcc GCC_BLSP2_AHB_CLK>;
2558			clock-names = "core", "iface";
2559			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2560			dma-names = "tx", "rx";
2561			pinctrl-names = "default", "sleep";
2562			pinctrl-0 = <&blsp2_i2c3_default>;
2563			pinctrl-1 = <&blsp2_i2c3_sleep>;
2564			clock-frequency = <400000>;
2565
2566			status = "disabled";
2567			#address-cells = <1>;
2568			#size-cells = <0>;
2569		};
2570
2571		blsp2_i2c4: i2c@c1b8000 {
2572			compatible = "qcom,i2c-qup-v2.2.1";
2573			reg = <0x0c1b8000 0x600>;
2574			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2575
2576			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
2577				 <&gcc GCC_BLSP2_AHB_CLK>;
2578			clock-names = "core", "iface";
2579			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2580			dma-names = "tx", "rx";
2581			pinctrl-names = "default", "sleep";
2582			pinctrl-0 = <&blsp2_i2c4_default>;
2583			pinctrl-1 = <&blsp2_i2c4_sleep>;
2584			clock-frequency = <400000>;
2585
2586			status = "disabled";
2587			#address-cells = <1>;
2588			#size-cells = <0>;
2589		};
2590
2591		blsp2_i2c5: i2c@c1b9000 {
2592			compatible = "qcom,i2c-qup-v2.2.1";
2593			reg = <0x0c1b9000 0x600>;
2594			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2595
2596			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
2597				 <&gcc GCC_BLSP2_AHB_CLK>;
2598			clock-names = "core", "iface";
2599			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2600			dma-names = "tx", "rx";
2601			pinctrl-names = "default", "sleep";
2602			pinctrl-0 = <&blsp2_i2c5_default>;
2603			pinctrl-1 = <&blsp2_i2c5_sleep>;
2604			clock-frequency = <400000>;
2605
2606			status = "disabled";
2607			#address-cells = <1>;
2608			#size-cells = <0>;
2609		};
2610
2611		blsp2_i2c6: i2c@c1ba000 {
2612			compatible = "qcom,i2c-qup-v2.2.1";
2613			reg = <0x0c1ba000 0x600>;
2614			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2615
2616			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
2617				 <&gcc GCC_BLSP2_AHB_CLK>;
2618			clock-names = "core", "iface";
2619			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2620			dma-names = "tx", "rx";
2621			pinctrl-names = "default", "sleep";
2622			pinctrl-0 = <&blsp2_i2c6_default>;
2623			pinctrl-1 = <&blsp2_i2c6_sleep>;
2624			clock-frequency = <400000>;
2625
2626			status = "disabled";
2627			#address-cells = <1>;
2628			#size-cells = <0>;
2629		};
2630
2631		blsp2_spi1: spi@c1b5000 {
2632			compatible = "qcom,spi-qup-v2.2.1";
2633			reg = <0x0c1b5000 0x600>;
2634			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2635
2636			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
2637				 <&gcc GCC_BLSP2_AHB_CLK>;
2638			clock-names = "core", "iface";
2639			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2640			dma-names = "tx", "rx";
2641			pinctrl-names = "default";
2642			pinctrl-0 = <&blsp2_spi1_default>;
2643
2644			status = "disabled";
2645			#address-cells = <1>;
2646			#size-cells = <0>;
2647		};
2648
2649		blsp2_spi2: spi@c1b6000 {
2650			compatible = "qcom,spi-qup-v2.2.1";
2651			reg = <0x0c1b6000 0x600>;
2652			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2653
2654			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
2655				 <&gcc GCC_BLSP2_AHB_CLK>;
2656			clock-names = "core", "iface";
2657			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2658			dma-names = "tx", "rx";
2659			pinctrl-names = "default";
2660			pinctrl-0 = <&blsp2_spi2_default>;
2661
2662			status = "disabled";
2663			#address-cells = <1>;
2664			#size-cells = <0>;
2665		};
2666
2667		blsp2_spi3: spi@c1b7000 {
2668			compatible = "qcom,spi-qup-v2.2.1";
2669			reg = <0x0c1b7000 0x600>;
2670			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2671
2672			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
2673				 <&gcc GCC_BLSP2_AHB_CLK>;
2674			clock-names = "core", "iface";
2675			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2676			dma-names = "tx", "rx";
2677			pinctrl-names = "default";
2678			pinctrl-0 = <&blsp2_spi3_default>;
2679
2680			status = "disabled";
2681			#address-cells = <1>;
2682			#size-cells = <0>;
2683		};
2684
2685		blsp2_spi4: spi@c1b8000 {
2686			compatible = "qcom,spi-qup-v2.2.1";
2687			reg = <0x0c1b8000 0x600>;
2688			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2689
2690			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
2691				 <&gcc GCC_BLSP2_AHB_CLK>;
2692			clock-names = "core", "iface";
2693			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2694			dma-names = "tx", "rx";
2695			pinctrl-names = "default";
2696			pinctrl-0 = <&blsp2_spi4_default>;
2697
2698			status = "disabled";
2699			#address-cells = <1>;
2700			#size-cells = <0>;
2701		};
2702
2703		blsp2_spi5: spi@c1b9000 {
2704			compatible = "qcom,spi-qup-v2.2.1";
2705			reg = <0x0c1b9000 0x600>;
2706			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2707
2708			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
2709				 <&gcc GCC_BLSP2_AHB_CLK>;
2710			clock-names = "core", "iface";
2711			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2712			dma-names = "tx", "rx";
2713			pinctrl-names = "default";
2714			pinctrl-0 = <&blsp2_spi5_default>;
2715
2716			status = "disabled";
2717			#address-cells = <1>;
2718			#size-cells = <0>;
2719		};
2720
2721		blsp2_spi6: spi@c1ba000 {
2722			compatible = "qcom,spi-qup-v2.2.1";
2723			reg = <0x0c1ba000 0x600>;
2724			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2725
2726			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
2727				 <&gcc GCC_BLSP2_AHB_CLK>;
2728			clock-names = "core", "iface";
2729			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2730			dma-names = "tx", "rx";
2731			pinctrl-names = "default";
2732			pinctrl-0 = <&blsp2_spi6_default>;
2733
2734			status = "disabled";
2735			#address-cells = <1>;
2736			#size-cells = <0>;
2737		};
2738
2739		mmcc: clock-controller@c8c0000 {
2740			compatible = "qcom,mmcc-msm8998";
2741			#clock-cells = <1>;
2742			#reset-cells = <1>;
2743			#power-domain-cells = <1>;
2744			reg = <0xc8c0000 0x40000>;
2745
2746			clock-names = "xo",
2747				      "gpll0",
2748				      "dsi0dsi",
2749				      "dsi0byte",
2750				      "dsi1dsi",
2751				      "dsi1byte",
2752				      "hdmipll",
2753				      "dplink",
2754				      "dpvco",
2755				      "gpll0_div";
2756			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
2757				 <&gcc GCC_MMSS_GPLL0_CLK>,
2758				 <&mdss_dsi0_phy 1>,
2759				 <&mdss_dsi0_phy 0>,
2760				 <&mdss_dsi1_phy 1>,
2761				 <&mdss_dsi1_phy 0>,
2762				 <0>,
2763				 <0>,
2764				 <0>,
2765				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
2766		};
2767
2768		mdss: display-subsystem@c900000 {
2769			compatible = "qcom,msm8998-mdss";
2770			reg = <0x0c900000 0x1000>;
2771			reg-names = "mdss";
2772
2773			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2774			interrupt-controller;
2775			#interrupt-cells = <1>;
2776
2777			clocks = <&mmcc MDSS_AHB_CLK>,
2778				 <&mmcc MDSS_AXI_CLK>,
2779				 <&mmcc MDSS_MDP_CLK>;
2780			clock-names = "iface",
2781				      "bus",
2782				      "core";
2783
2784			power-domains = <&mmcc MDSS_GDSC>;
2785			iommus = <&mmss_smmu 0>;
2786
2787			#address-cells = <1>;
2788			#size-cells = <1>;
2789			ranges;
2790
2791			status = "disabled";
2792
2793			mdss_mdp: display-controller@c901000 {
2794				compatible = "qcom,msm8998-dpu";
2795				reg = <0x0c901000 0x8f000>,
2796				      <0x0c9a8e00 0xf0>,
2797				      <0x0c9b0000 0x2008>,
2798				      <0x0c9b8000 0x1040>;
2799				reg-names = "mdp",
2800					    "regdma",
2801					    "vbif",
2802					    "vbif_nrt";
2803
2804				interrupt-parent = <&mdss>;
2805				interrupts = <0>;
2806
2807				clocks = <&mmcc MDSS_AHB_CLK>,
2808					 <&mmcc MDSS_AXI_CLK>,
2809					 <&mmcc MNOC_AHB_CLK>,
2810					 <&mmcc MDSS_MDP_CLK>,
2811					 <&mmcc MDSS_VSYNC_CLK>;
2812				clock-names = "iface",
2813					      "bus",
2814					      "mnoc",
2815					      "core",
2816					      "vsync";
2817
2818				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
2819				assigned-clock-rates = <19200000>;
2820
2821				operating-points-v2 = <&mdp_opp_table>;
2822				power-domains = <&rpmpd MSM8998_VDDMX>;
2823
2824				mdp_opp_table: opp-table {
2825					compatible = "operating-points-v2";
2826
2827					opp-171430000 {
2828						opp-hz = /bits/ 64 <171430000>;
2829						required-opps = <&rpmpd_opp_low_svs>;
2830					};
2831
2832					opp-275000000 {
2833						opp-hz = /bits/ 64 <275000000>;
2834						required-opps = <&rpmpd_opp_svs>;
2835					};
2836
2837					opp-330000000 {
2838						opp-hz = /bits/ 64 <330000000>;
2839						required-opps = <&rpmpd_opp_nom>;
2840					};
2841
2842					opp-412500000 {
2843						opp-hz = /bits/ 64 <412500000>;
2844						required-opps = <&rpmpd_opp_turbo>;
2845					};
2846				};
2847
2848				ports {
2849					#address-cells = <1>;
2850					#size-cells = <0>;
2851
2852					port@0 {
2853						reg = <0>;
2854
2855						dpu_intf1_out: endpoint {
2856							remote-endpoint = <&mdss_dsi0_in>;
2857						};
2858					};
2859
2860					port@1 {
2861						reg = <1>;
2862
2863						dpu_intf2_out: endpoint {
2864							remote-endpoint = <&mdss_dsi1_in>;
2865						};
2866					};
2867				};
2868			};
2869
2870			mdss_dsi0: dsi@c994000 {
2871				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2872				reg = <0x0c994000 0x400>;
2873				reg-names = "dsi_ctrl";
2874
2875				interrupt-parent = <&mdss>;
2876				interrupts = <4>;
2877
2878				clocks = <&mmcc MDSS_BYTE0_CLK>,
2879					 <&mmcc MDSS_BYTE0_INTF_CLK>,
2880					 <&mmcc MDSS_PCLK0_CLK>,
2881					 <&mmcc MDSS_ESC0_CLK>,
2882					 <&mmcc MDSS_AHB_CLK>,
2883					 <&mmcc MDSS_AXI_CLK>;
2884				clock-names = "byte",
2885					      "byte_intf",
2886					      "pixel",
2887					      "core",
2888					      "iface",
2889					      "bus";
2890				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
2891						  <&mmcc PCLK0_CLK_SRC>;
2892				assigned-clock-parents = <&mdss_dsi0_phy 0>,
2893							 <&mdss_dsi0_phy 1>;
2894
2895				operating-points-v2 = <&dsi_opp_table>;
2896				power-domains = <&rpmpd MSM8998_VDDCX>;
2897
2898				phys = <&mdss_dsi0_phy>;
2899				phy-names = "dsi";
2900
2901				#address-cells = <1>;
2902				#size-cells = <0>;
2903
2904				status = "disabled";
2905
2906				ports {
2907					#address-cells = <1>;
2908					#size-cells = <0>;
2909
2910					port@0 {
2911						reg = <0>;
2912
2913						mdss_dsi0_in: endpoint {
2914							remote-endpoint = <&dpu_intf1_out>;
2915						};
2916					};
2917
2918					port@1 {
2919						reg = <1>;
2920
2921						mdss_dsi0_out: endpoint {
2922						};
2923					};
2924				};
2925			};
2926
2927			mdss_dsi0_phy: phy@c994400 {
2928				compatible = "qcom,dsi-phy-10nm-8998";
2929				reg = <0x0c994400 0x200>,
2930				      <0x0c994600 0x280>,
2931				      <0x0c994a00 0x1e0>;
2932				reg-names = "dsi_phy",
2933					    "dsi_phy_lane",
2934					    "dsi_pll";
2935
2936				clocks = <&mmcc MDSS_AHB_CLK>,
2937					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2938				clock-names = "iface", "ref";
2939
2940				#clock-cells = <1>;
2941				#phy-cells = <0>;
2942
2943				status = "disabled";
2944			};
2945
2946			mdss_dsi1: dsi@c996000 {
2947				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2948				reg = <0x0c996000 0x400>;
2949				reg-names = "dsi_ctrl";
2950
2951				interrupt-parent = <&mdss>;
2952				interrupts = <5>;
2953
2954				clocks = <&mmcc MDSS_BYTE1_CLK>,
2955					 <&mmcc MDSS_BYTE1_INTF_CLK>,
2956					 <&mmcc MDSS_PCLK1_CLK>,
2957					 <&mmcc MDSS_ESC1_CLK>,
2958					 <&mmcc MDSS_AHB_CLK>,
2959					 <&mmcc MDSS_AXI_CLK>;
2960				clock-names = "byte",
2961					      "byte_intf",
2962					      "pixel",
2963					      "core",
2964					      "iface",
2965					      "bus";
2966				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
2967						  <&mmcc PCLK1_CLK_SRC>;
2968				assigned-clock-parents = <&mdss_dsi1_phy 0>,
2969							 <&mdss_dsi1_phy 1>;
2970
2971				operating-points-v2 = <&dsi_opp_table>;
2972				power-domains = <&rpmpd MSM8998_VDDCX>;
2973
2974				phys = <&mdss_dsi1_phy>;
2975				phy-names = "dsi";
2976
2977				#address-cells = <1>;
2978				#size-cells = <0>;
2979
2980				status = "disabled";
2981
2982				ports {
2983					#address-cells = <1>;
2984					#size-cells = <0>;
2985
2986					port@0 {
2987						reg = <0>;
2988
2989						mdss_dsi1_in: endpoint {
2990							remote-endpoint = <&dpu_intf2_out>;
2991						};
2992					};
2993
2994					port@1 {
2995						reg = <1>;
2996
2997						mdss_dsi1_out: endpoint {
2998						};
2999					};
3000				};
3001			};
3002
3003			mdss_dsi1_phy: phy@c996400 {
3004				compatible = "qcom,dsi-phy-10nm-8998";
3005				reg = <0x0c996400 0x200>,
3006				      <0x0c996600 0x280>,
3007				      <0x0c996a00 0x10e>;
3008				reg-names = "dsi_phy",
3009					    "dsi_phy_lane",
3010					    "dsi_pll";
3011
3012				clocks = <&mmcc MDSS_AHB_CLK>,
3013					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
3014				clock-names = "iface",
3015					      "ref";
3016
3017				#clock-cells = <1>;
3018				#phy-cells = <0>;
3019
3020				status = "disabled";
3021			};
3022		};
3023
3024		mmss_smmu: iommu@cd00000 {
3025			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
3026			reg = <0x0cd00000 0x40000>;
3027			#iommu-cells = <1>;
3028
3029			clocks = <&mmcc MNOC_AHB_CLK>,
3030				 <&mmcc BIMC_SMMU_AHB_CLK>,
3031				 <&mmcc BIMC_SMMU_AXI_CLK>;
3032			clock-names = "iface-mm",
3033				      "iface-smmu",
3034				      "bus-smmu";
3035
3036			#global-interrupts = <0>;
3037			interrupts =
3038				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
3039				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
3040				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
3041				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
3042				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
3043				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
3044				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
3045				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
3046				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
3047				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
3048				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
3049				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
3050				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
3051				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
3052				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
3053				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
3054				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
3055				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
3056				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
3057				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
3058
3059			power-domains = <&mmcc BIMC_SMMU_GDSC>;
3060		};
3061
3062		remoteproc_adsp: remoteproc@17300000 {
3063			compatible = "qcom,msm8998-adsp-pas";
3064			reg = <0x17300000 0x4040>;
3065
3066			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
3067					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3068					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3069					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3070					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3071			interrupt-names = "wdog", "fatal", "ready",
3072					  "handover", "stop-ack";
3073
3074			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
3075			clock-names = "xo";
3076
3077			memory-region = <&adsp_mem>;
3078
3079			qcom,smem-states = <&adsp_smp2p_out 0>;
3080			qcom,smem-state-names = "stop";
3081
3082			power-domains = <&rpmpd MSM8998_VDDCX>;
3083			power-domain-names = "cx";
3084
3085			status = "disabled";
3086
3087			glink-edge {
3088				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
3089				label = "lpass";
3090				qcom,remote-pid = <2>;
3091				mboxes = <&apcs_glb 9>;
3092			};
3093		};
3094
3095		apcs_glb: mailbox@17911000 {
3096			compatible = "qcom,msm8998-apcs-hmss-global",
3097				     "qcom,msm8994-apcs-kpss-global";
3098			reg = <0x17911000 0x1000>;
3099
3100			#mbox-cells = <1>;
3101		};
3102
3103		timer@17920000 {
3104			#address-cells = <1>;
3105			#size-cells = <1>;
3106			ranges;
3107			compatible = "arm,armv7-timer-mem";
3108			reg = <0x17920000 0x1000>;
3109
3110			frame@17921000 {
3111				frame-number = <0>;
3112				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3113					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
3114				reg = <0x17921000 0x1000>,
3115				      <0x17922000 0x1000>;
3116			};
3117
3118			frame@17923000 {
3119				frame-number = <1>;
3120				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3121				reg = <0x17923000 0x1000>;
3122				status = "disabled";
3123			};
3124
3125			frame@17924000 {
3126				frame-number = <2>;
3127				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3128				reg = <0x17924000 0x1000>;
3129				status = "disabled";
3130			};
3131
3132			frame@17925000 {
3133				frame-number = <3>;
3134				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3135				reg = <0x17925000 0x1000>;
3136				status = "disabled";
3137			};
3138
3139			frame@17926000 {
3140				frame-number = <4>;
3141				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3142				reg = <0x17926000 0x1000>;
3143				status = "disabled";
3144			};
3145
3146			frame@17927000 {
3147				frame-number = <5>;
3148				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3149				reg = <0x17927000 0x1000>;
3150				status = "disabled";
3151			};
3152
3153			frame@17928000 {
3154				frame-number = <6>;
3155				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3156				reg = <0x17928000 0x1000>;
3157				status = "disabled";
3158			};
3159		};
3160
3161		intc: interrupt-controller@17a00000 {
3162			compatible = "arm,gic-v3";
3163			reg = <0x17a00000 0x10000>,       /* GICD */
3164			      <0x17b00000 0x100000>;      /* GICR * 8 */
3165			#interrupt-cells = <3>;
3166			#address-cells = <1>;
3167			#size-cells = <1>;
3168			ranges;
3169			interrupt-controller;
3170			#redistributor-regions = <1>;
3171			redistributor-stride = <0x0 0x20000>;
3172			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3173		};
3174
3175		wifi: wifi@18800000 {
3176			compatible = "qcom,wcn3990-wifi";
3177			status = "disabled";
3178			reg = <0x18800000 0x800000>;
3179			reg-names = "membase";
3180			memory-region = <&wlan_msa_mem>;
3181			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
3182			clock-names = "cxo_ref_clk_pin";
3183			interrupts =
3184				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
3185				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3186				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3187				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3188				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3189				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3190				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3191				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3192				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3193				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3194				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3195				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3196			iommus = <&anoc2_smmu 0x1900>,
3197				 <&anoc2_smmu 0x1901>;
3198			qcom,snoc-host-cap-8bit-quirk;
3199		};
3200	};
3201};
3202