xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8998.dtsi (revision 4507a8b9) 
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/qcom,gcc-msm8998.h>
6#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/power/qcom-rpmpd.h>
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	interrupt-parent = <&intc>;
14
15	qcom,msm-id = <292 0x0>;
16
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	chosen { };
21
22	memory@80000000 {
23		device_type = "memory";
24		/* We expect the bootloader to fill in the reg */
25		reg = <0x0 0x80000000 0x0 0x0>;
26	};
27
28	reserved-memory {
29		#address-cells = <2>;
30		#size-cells = <2>;
31		ranges;
32
33		hyp_mem: memory@85800000 {
34			reg = <0x0 0x85800000 0x0 0x600000>;
35			no-map;
36		};
37
38		xbl_mem: memory@85e00000 {
39			reg = <0x0 0x85e00000 0x0 0x100000>;
40			no-map;
41		};
42
43		smem_mem: smem-mem@86000000 {
44			reg = <0x0 0x86000000 0x0 0x200000>;
45			no-map;
46		};
47
48		tz_mem: memory@86200000 {
49			reg = <0x0 0x86200000 0x0 0x2d00000>;
50			no-map;
51		};
52
53		rmtfs_mem: memory@88f00000 {
54			compatible = "qcom,rmtfs-mem";
55			reg = <0x0 0x88f00000 0x0 0x200000>;
56			no-map;
57
58			qcom,client-id = <1>;
59			qcom,vmid = <15>;
60		};
61
62		spss_mem: memory@8ab00000 {
63			reg = <0x0 0x8ab00000 0x0 0x700000>;
64			no-map;
65		};
66
67		adsp_mem: memory@8b200000 {
68			reg = <0x0 0x8b200000 0x0 0x1a00000>;
69			no-map;
70		};
71
72		mpss_mem: memory@8cc00000 {
73			reg = <0x0 0x8cc00000 0x0 0x7000000>;
74			no-map;
75		};
76
77		venus_mem: memory@93c00000 {
78			reg = <0x0 0x93c00000 0x0 0x500000>;
79			no-map;
80		};
81
82		mba_mem: memory@94100000 {
83			reg = <0x0 0x94100000 0x0 0x200000>;
84			no-map;
85		};
86
87		slpi_mem: memory@94300000 {
88			reg = <0x0 0x94300000 0x0 0xf00000>;
89			no-map;
90		};
91
92		ipa_fw_mem: memory@95200000 {
93			reg = <0x0 0x95200000 0x0 0x10000>;
94			no-map;
95		};
96
97		ipa_gsi_mem: memory@95210000 {
98			reg = <0x0 0x95210000 0x0 0x5000>;
99			no-map;
100		};
101
102		gpu_mem: memory@95600000 {
103			reg = <0x0 0x95600000 0x0 0x100000>;
104			no-map;
105		};
106
107		wlan_msa_mem: memory@95700000 {
108			reg = <0x0 0x95700000 0x0 0x100000>;
109			no-map;
110		};
111
112		mdata_mem: mpss-metadata {
113			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
114			size = <0x0 0x4000>;
115			no-map;
116		};
117	};
118
119	clocks {
120		xo: xo-board {
121			compatible = "fixed-clock";
122			#clock-cells = <0>;
123			clock-frequency = <19200000>;
124			clock-output-names = "xo_board";
125		};
126
127		sleep_clk: sleep-clk {
128			compatible = "fixed-clock";
129			#clock-cells = <0>;
130			clock-frequency = <32764>;
131		};
132	};
133
134	cpus {
135		#address-cells = <2>;
136		#size-cells = <0>;
137
138		CPU0: cpu@0 {
139			device_type = "cpu";
140			compatible = "qcom,kryo280";
141			reg = <0x0 0x0>;
142			enable-method = "psci";
143			capacity-dmips-mhz = <1024>;
144			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
145			next-level-cache = <&L2_0>;
146			L2_0: l2-cache {
147				compatible = "cache";
148				cache-level = <2>;
149				cache-unified;
150			};
151		};
152
153		CPU1: cpu@1 {
154			device_type = "cpu";
155			compatible = "qcom,kryo280";
156			reg = <0x0 0x1>;
157			enable-method = "psci";
158			capacity-dmips-mhz = <1024>;
159			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
160			next-level-cache = <&L2_0>;
161		};
162
163		CPU2: cpu@2 {
164			device_type = "cpu";
165			compatible = "qcom,kryo280";
166			reg = <0x0 0x2>;
167			enable-method = "psci";
168			capacity-dmips-mhz = <1024>;
169			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
170			next-level-cache = <&L2_0>;
171		};
172
173		CPU3: cpu@3 {
174			device_type = "cpu";
175			compatible = "qcom,kryo280";
176			reg = <0x0 0x3>;
177			enable-method = "psci";
178			capacity-dmips-mhz = <1024>;
179			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
180			next-level-cache = <&L2_0>;
181		};
182
183		CPU4: cpu@100 {
184			device_type = "cpu";
185			compatible = "qcom,kryo280";
186			reg = <0x0 0x100>;
187			enable-method = "psci";
188			capacity-dmips-mhz = <1536>;
189			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
190			next-level-cache = <&L2_1>;
191			L2_1: l2-cache {
192				compatible = "cache";
193				cache-level = <2>;
194				cache-unified;
195			};
196		};
197
198		CPU5: cpu@101 {
199			device_type = "cpu";
200			compatible = "qcom,kryo280";
201			reg = <0x0 0x101>;
202			enable-method = "psci";
203			capacity-dmips-mhz = <1536>;
204			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
205			next-level-cache = <&L2_1>;
206		};
207
208		CPU6: cpu@102 {
209			device_type = "cpu";
210			compatible = "qcom,kryo280";
211			reg = <0x0 0x102>;
212			enable-method = "psci";
213			capacity-dmips-mhz = <1536>;
214			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
215			next-level-cache = <&L2_1>;
216		};
217
218		CPU7: cpu@103 {
219			device_type = "cpu";
220			compatible = "qcom,kryo280";
221			reg = <0x0 0x103>;
222			enable-method = "psci";
223			capacity-dmips-mhz = <1536>;
224			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
225			next-level-cache = <&L2_1>;
226		};
227
228		cpu-map {
229			cluster0 {
230				core0 {
231					cpu = <&CPU0>;
232				};
233
234				core1 {
235					cpu = <&CPU1>;
236				};
237
238				core2 {
239					cpu = <&CPU2>;
240				};
241
242				core3 {
243					cpu = <&CPU3>;
244				};
245			};
246
247			cluster1 {
248				core0 {
249					cpu = <&CPU4>;
250				};
251
252				core1 {
253					cpu = <&CPU5>;
254				};
255
256				core2 {
257					cpu = <&CPU6>;
258				};
259
260				core3 {
261					cpu = <&CPU7>;
262				};
263			};
264		};
265
266		idle-states {
267			entry-method = "psci";
268
269			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
270				compatible = "arm,idle-state";
271				idle-state-name = "little-retention";
272				/* CPU Retention (C2D), L2 Active */
273				arm,psci-suspend-param = <0x00000002>;
274				entry-latency-us = <81>;
275				exit-latency-us = <86>;
276				min-residency-us = <504>;
277			};
278
279			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
280				compatible = "arm,idle-state";
281				idle-state-name = "little-power-collapse";
282				/* CPU + L2 Power Collapse (C3, D4) */
283				arm,psci-suspend-param = <0x40000003>;
284				entry-latency-us = <814>;
285				exit-latency-us = <4562>;
286				min-residency-us = <9183>;
287				local-timer-stop;
288			};
289
290			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
291				compatible = "arm,idle-state";
292				idle-state-name = "big-retention";
293				/* CPU Retention (C2D), L2 Active */
294				arm,psci-suspend-param = <0x00000002>;
295				entry-latency-us = <79>;
296				exit-latency-us = <82>;
297				min-residency-us = <1302>;
298			};
299
300			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
301				compatible = "arm,idle-state";
302				idle-state-name = "big-power-collapse";
303				/* CPU + L2 Power Collapse (C3, D4) */
304				arm,psci-suspend-param = <0x40000003>;
305				entry-latency-us = <724>;
306				exit-latency-us = <2027>;
307				min-residency-us = <9419>;
308				local-timer-stop;
309			};
310		};
311	};
312
313	firmware {
314		scm {
315			compatible = "qcom,scm-msm8998", "qcom,scm";
316		};
317	};
318
319	dsi_opp_table: opp-table-dsi {
320		compatible = "operating-points-v2";
321
322		opp-131250000 {
323			opp-hz = /bits/ 64 <131250000>;
324			required-opps = <&rpmpd_opp_low_svs>;
325		};
326
327		opp-210000000 {
328			opp-hz = /bits/ 64 <210000000>;
329			required-opps = <&rpmpd_opp_svs>;
330		};
331
332		opp-312500000 {
333			opp-hz = /bits/ 64 <312500000>;
334			required-opps = <&rpmpd_opp_nom>;
335		};
336	};
337
338	psci {
339		compatible = "arm,psci-1.0";
340		method = "smc";
341	};
342
343	rpm: remoteproc {
344		compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
345
346		glink-edge {
347			compatible = "qcom,glink-rpm";
348
349			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
350			qcom,rpm-msg-ram = <&rpm_msg_ram>;
351			mboxes = <&apcs_glb 0>;
352
353			rpm_requests: rpm-requests {
354				compatible = "qcom,rpm-msm8998";
355				qcom,glink-channels = "rpm_requests";
356
357				rpmcc: clock-controller {
358					compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
359					clocks = <&xo>;
360					clock-names = "xo";
361					#clock-cells = <1>;
362				};
363
364				rpmpd: power-controller {
365					compatible = "qcom,msm8998-rpmpd";
366					#power-domain-cells = <1>;
367					operating-points-v2 = <&rpmpd_opp_table>;
368
369					rpmpd_opp_table: opp-table {
370						compatible = "operating-points-v2";
371
372						rpmpd_opp_ret: opp1 {
373							opp-level = <RPM_SMD_LEVEL_RETENTION>;
374						};
375
376						rpmpd_opp_ret_plus: opp2 {
377							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
378						};
379
380						rpmpd_opp_min_svs: opp3 {
381							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
382						};
383
384						rpmpd_opp_low_svs: opp4 {
385							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
386						};
387
388						rpmpd_opp_svs: opp5 {
389							opp-level = <RPM_SMD_LEVEL_SVS>;
390						};
391
392						rpmpd_opp_svs_plus: opp6 {
393							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
394						};
395
396						rpmpd_opp_nom: opp7 {
397							opp-level = <RPM_SMD_LEVEL_NOM>;
398						};
399
400						rpmpd_opp_nom_plus: opp8 {
401							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
402						};
403
404						rpmpd_opp_turbo: opp9 {
405							opp-level = <RPM_SMD_LEVEL_TURBO>;
406						};
407
408						rpmpd_opp_turbo_plus: opp10 {
409							opp-level = <RPM_SMD_LEVEL_BINNING>;
410						};
411					};
412				};
413			};
414		};
415	};
416
417	smem {
418		compatible = "qcom,smem";
419		memory-region = <&smem_mem>;
420		hwlocks = <&tcsr_mutex 3>;
421	};
422
423	smp2p-lpass {
424		compatible = "qcom,smp2p";
425		qcom,smem = <443>, <429>;
426
427		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
428
429		mboxes = <&apcs_glb 10>;
430
431		qcom,local-pid = <0>;
432		qcom,remote-pid = <2>;
433
434		adsp_smp2p_out: master-kernel {
435			qcom,entry-name = "master-kernel";
436			#qcom,smem-state-cells = <1>;
437		};
438
439		adsp_smp2p_in: slave-kernel {
440			qcom,entry-name = "slave-kernel";
441
442			interrupt-controller;
443			#interrupt-cells = <2>;
444		};
445	};
446
447	smp2p-mpss {
448		compatible = "qcom,smp2p";
449		qcom,smem = <435>, <428>;
450		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
451		mboxes = <&apcs_glb 14>;
452		qcom,local-pid = <0>;
453		qcom,remote-pid = <1>;
454
455		modem_smp2p_out: master-kernel {
456			qcom,entry-name = "master-kernel";
457			#qcom,smem-state-cells = <1>;
458		};
459
460		modem_smp2p_in: slave-kernel {
461			qcom,entry-name = "slave-kernel";
462			interrupt-controller;
463			#interrupt-cells = <2>;
464		};
465	};
466
467	smp2p-slpi {
468		compatible = "qcom,smp2p";
469		qcom,smem = <481>, <430>;
470		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
471		mboxes = <&apcs_glb 26>;
472		qcom,local-pid = <0>;
473		qcom,remote-pid = <3>;
474
475		slpi_smp2p_out: master-kernel {
476			qcom,entry-name = "master-kernel";
477			#qcom,smem-state-cells = <1>;
478		};
479
480		slpi_smp2p_in: slave-kernel {
481			qcom,entry-name = "slave-kernel";
482			interrupt-controller;
483			#interrupt-cells = <2>;
484		};
485	};
486
487	thermal-zones {
488		cpu0-thermal {
489			polling-delay-passive = <250>;
490			polling-delay = <1000>;
491
492			thermal-sensors = <&tsens0 1>;
493
494			trips {
495				cpu0_alert0: trip-point0 {
496					temperature = <75000>;
497					hysteresis = <2000>;
498					type = "passive";
499				};
500
501				cpu0_crit: cpu-crit {
502					temperature = <110000>;
503					hysteresis = <2000>;
504					type = "critical";
505				};
506			};
507		};
508
509		cpu1-thermal {
510			polling-delay-passive = <250>;
511			polling-delay = <1000>;
512
513			thermal-sensors = <&tsens0 2>;
514
515			trips {
516				cpu1_alert0: trip-point0 {
517					temperature = <75000>;
518					hysteresis = <2000>;
519					type = "passive";
520				};
521
522				cpu1_crit: cpu-crit {
523					temperature = <110000>;
524					hysteresis = <2000>;
525					type = "critical";
526				};
527			};
528		};
529
530		cpu2-thermal {
531			polling-delay-passive = <250>;
532			polling-delay = <1000>;
533
534			thermal-sensors = <&tsens0 3>;
535
536			trips {
537				cpu2_alert0: trip-point0 {
538					temperature = <75000>;
539					hysteresis = <2000>;
540					type = "passive";
541				};
542
543				cpu2_crit: cpu-crit {
544					temperature = <110000>;
545					hysteresis = <2000>;
546					type = "critical";
547				};
548			};
549		};
550
551		cpu3-thermal {
552			polling-delay-passive = <250>;
553			polling-delay = <1000>;
554
555			thermal-sensors = <&tsens0 4>;
556
557			trips {
558				cpu3_alert0: trip-point0 {
559					temperature = <75000>;
560					hysteresis = <2000>;
561					type = "passive";
562				};
563
564				cpu3_crit: cpu-crit {
565					temperature = <110000>;
566					hysteresis = <2000>;
567					type = "critical";
568				};
569			};
570		};
571
572		cpu4-thermal {
573			polling-delay-passive = <250>;
574			polling-delay = <1000>;
575
576			thermal-sensors = <&tsens0 7>;
577
578			trips {
579				cpu4_alert0: trip-point0 {
580					temperature = <75000>;
581					hysteresis = <2000>;
582					type = "passive";
583				};
584
585				cpu4_crit: cpu-crit {
586					temperature = <110000>;
587					hysteresis = <2000>;
588					type = "critical";
589				};
590			};
591		};
592
593		cpu5-thermal {
594			polling-delay-passive = <250>;
595			polling-delay = <1000>;
596
597			thermal-sensors = <&tsens0 8>;
598
599			trips {
600				cpu5_alert0: trip-point0 {
601					temperature = <75000>;
602					hysteresis = <2000>;
603					type = "passive";
604				};
605
606				cpu5_crit: cpu-crit {
607					temperature = <110000>;
608					hysteresis = <2000>;
609					type = "critical";
610				};
611			};
612		};
613
614		cpu6-thermal {
615			polling-delay-passive = <250>;
616			polling-delay = <1000>;
617
618			thermal-sensors = <&tsens0 9>;
619
620			trips {
621				cpu6_alert0: trip-point0 {
622					temperature = <75000>;
623					hysteresis = <2000>;
624					type = "passive";
625				};
626
627				cpu6_crit: cpu-crit {
628					temperature = <110000>;
629					hysteresis = <2000>;
630					type = "critical";
631				};
632			};
633		};
634
635		cpu7-thermal {
636			polling-delay-passive = <250>;
637			polling-delay = <1000>;
638
639			thermal-sensors = <&tsens0 10>;
640
641			trips {
642				cpu7_alert0: trip-point0 {
643					temperature = <75000>;
644					hysteresis = <2000>;
645					type = "passive";
646				};
647
648				cpu7_crit: cpu-crit {
649					temperature = <110000>;
650					hysteresis = <2000>;
651					type = "critical";
652				};
653			};
654		};
655
656		gpu-bottom-thermal {
657			polling-delay-passive = <250>;
658			polling-delay = <1000>;
659
660			thermal-sensors = <&tsens0 12>;
661
662			trips {
663				gpu1_alert0: trip-point0 {
664					temperature = <90000>;
665					hysteresis = <2000>;
666					type = "hot";
667				};
668			};
669		};
670
671		gpu-top-thermal {
672			polling-delay-passive = <250>;
673			polling-delay = <1000>;
674
675			thermal-sensors = <&tsens0 13>;
676
677			trips {
678				gpu2_alert0: trip-point0 {
679					temperature = <90000>;
680					hysteresis = <2000>;
681					type = "hot";
682				};
683			};
684		};
685
686		clust0-mhm-thermal {
687			polling-delay-passive = <250>;
688			polling-delay = <1000>;
689
690			thermal-sensors = <&tsens0 5>;
691
692			trips {
693				cluster0_mhm_alert0: trip-point0 {
694					temperature = <90000>;
695					hysteresis = <2000>;
696					type = "hot";
697				};
698			};
699		};
700
701		clust1-mhm-thermal {
702			polling-delay-passive = <250>;
703			polling-delay = <1000>;
704
705			thermal-sensors = <&tsens0 6>;
706
707			trips {
708				cluster1_mhm_alert0: trip-point0 {
709					temperature = <90000>;
710					hysteresis = <2000>;
711					type = "hot";
712				};
713			};
714		};
715
716		cluster1-l2-thermal {
717			polling-delay-passive = <250>;
718			polling-delay = <1000>;
719
720			thermal-sensors = <&tsens0 11>;
721
722			trips {
723				cluster1_l2_alert0: trip-point0 {
724					temperature = <90000>;
725					hysteresis = <2000>;
726					type = "hot";
727				};
728			};
729		};
730
731		modem-thermal {
732			polling-delay-passive = <250>;
733			polling-delay = <1000>;
734
735			thermal-sensors = <&tsens1 1>;
736
737			trips {
738				modem_alert0: trip-point0 {
739					temperature = <90000>;
740					hysteresis = <2000>;
741					type = "hot";
742				};
743			};
744		};
745
746		mem-thermal {
747			polling-delay-passive = <250>;
748			polling-delay = <1000>;
749
750			thermal-sensors = <&tsens1 2>;
751
752			trips {
753				mem_alert0: trip-point0 {
754					temperature = <90000>;
755					hysteresis = <2000>;
756					type = "hot";
757				};
758			};
759		};
760
761		wlan-thermal {
762			polling-delay-passive = <250>;
763			polling-delay = <1000>;
764
765			thermal-sensors = <&tsens1 3>;
766
767			trips {
768				wlan_alert0: trip-point0 {
769					temperature = <90000>;
770					hysteresis = <2000>;
771					type = "hot";
772				};
773			};
774		};
775
776		q6-dsp-thermal {
777			polling-delay-passive = <250>;
778			polling-delay = <1000>;
779
780			thermal-sensors = <&tsens1 4>;
781
782			trips {
783				q6_dsp_alert0: trip-point0 {
784					temperature = <90000>;
785					hysteresis = <2000>;
786					type = "hot";
787				};
788			};
789		};
790
791		camera-thermal {
792			polling-delay-passive = <250>;
793			polling-delay = <1000>;
794
795			thermal-sensors = <&tsens1 5>;
796
797			trips {
798				camera_alert0: trip-point0 {
799					temperature = <90000>;
800					hysteresis = <2000>;
801					type = "hot";
802				};
803			};
804		};
805
806		multimedia-thermal {
807			polling-delay-passive = <250>;
808			polling-delay = <1000>;
809
810			thermal-sensors = <&tsens1 6>;
811
812			trips {
813				multimedia_alert0: trip-point0 {
814					temperature = <90000>;
815					hysteresis = <2000>;
816					type = "hot";
817				};
818			};
819		};
820	};
821
822	timer {
823		compatible = "arm,armv8-timer";
824		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
825			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
826			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
827			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
828	};
829
830	soc: soc@0 {
831		#address-cells = <1>;
832		#size-cells = <1>;
833		ranges = <0 0 0 0xffffffff>;
834		compatible = "simple-bus";
835
836		gcc: clock-controller@100000 {
837			compatible = "qcom,gcc-msm8998";
838			#clock-cells = <1>;
839			#reset-cells = <1>;
840			#power-domain-cells = <1>;
841			reg = <0x00100000 0xb0000>;
842
843			clock-names = "xo", "sleep_clk";
844			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
845
846			/*
847			 * The hypervisor typically configures the memory region where these clocks
848			 * reside as read-only for the HLOS. If the HLOS tried to enable or disable
849			 * these clocks on a device with such configuration (e.g. because they are
850			 * enabled but unused during boot-up), the device will most likely decide
851			 * to reboot.
852			 * In light of that, we are conservative here and we list all such clocks
853			 * as protected. The board dts (or a user-supplied dts) can override the
854			 * list of protected clocks if it differs from the norm, and it is in fact
855			 * desired for the HLOS to manage these clocks
856			 */
857			protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
858					   <SSC_XO>,
859					   <SSC_CNOC_AHBS_CLK>;
860		};
861
862		rpm_msg_ram: sram@778000 {
863			compatible = "qcom,rpm-msg-ram";
864			reg = <0x00778000 0x7000>;
865		};
866
867		qfprom: qfprom@784000 {
868			compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
869			reg = <0x00784000 0x621c>;
870			#address-cells = <1>;
871			#size-cells = <1>;
872
873			qusb2_hstx_trim: hstx-trim@23a {
874				reg = <0x23a 0x1>;
875				bits = <0 4>;
876			};
877		};
878
879		tsens0: thermal@10ab000 {
880			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
881			reg = <0x010ab000 0x1000>, /* TM */
882			      <0x010aa000 0x1000>; /* SROT */
883			#qcom,sensors = <14>;
884			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
885				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
886			interrupt-names = "uplow", "critical";
887			#thermal-sensor-cells = <1>;
888		};
889
890		tsens1: thermal@10ae000 {
891			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
892			reg = <0x010ae000 0x1000>, /* TM */
893			      <0x010ad000 0x1000>; /* SROT */
894			#qcom,sensors = <8>;
895			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
896				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
897			interrupt-names = "uplow", "critical";
898			#thermal-sensor-cells = <1>;
899		};
900
901		anoc1_smmu: iommu@1680000 {
902			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
903			reg = <0x01680000 0x10000>;
904			#iommu-cells = <1>;
905
906			#global-interrupts = <0>;
907			interrupts =
908				<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
909				<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
910				<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
911				<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
912				<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
913				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
914		};
915
916		anoc2_smmu: iommu@16c0000 {
917			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
918			reg = <0x016c0000 0x40000>;
919			#iommu-cells = <1>;
920
921			#global-interrupts = <0>;
922			interrupts =
923				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
924				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
925				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
926				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
927				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
928				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
929				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
930				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
931				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
932				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
933		};
934
935		pcie0: pci@1c00000 {
936			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
937			reg = <0x01c00000 0x2000>,
938			      <0x1b000000 0xf1d>,
939			      <0x1b000f20 0xa8>,
940			      <0x1b100000 0x100000>;
941			reg-names = "parf", "dbi", "elbi", "config";
942			device_type = "pci";
943			linux,pci-domain = <0>;
944			bus-range = <0x00 0xff>;
945			#address-cells = <3>;
946			#size-cells = <2>;
947			num-lanes = <1>;
948			phys = <&pciephy>;
949			phy-names = "pciephy";
950			status = "disabled";
951
952			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
953				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
954
955			#interrupt-cells = <1>;
956			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
957			interrupt-names = "msi";
958			interrupt-map-mask = <0 0 0 0x7>;
959			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
960					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
961					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
962					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
963
964			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
965				 <&gcc GCC_PCIE_0_AUX_CLK>,
966				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
967				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
968				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
969			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
970
971			power-domains = <&gcc PCIE_0_GDSC>;
972			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
973			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
974		};
975
976		pcie_phy: phy@1c06000 {
977			compatible = "qcom,msm8998-qmp-pcie-phy";
978			reg = <0x01c06000 0x18c>;
979			#address-cells = <1>;
980			#size-cells = <1>;
981			status = "disabled";
982			ranges;
983
984			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
985				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
986				 <&gcc GCC_PCIE_CLKREF_CLK>;
987			clock-names = "aux", "cfg_ahb", "ref";
988
989			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
990			reset-names = "phy", "common";
991
992			vdda-phy-supply = <&vreg_l1a_0p875>;
993			vdda-pll-supply = <&vreg_l2a_1p2>;
994
995			pciephy: phy@1c06800 {
996				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
997				#phy-cells = <0>;
998
999				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
1000				clock-names = "pipe0";
1001				clock-output-names = "pcie_0_pipe_clk_src";
1002				#clock-cells = <0>;
1003			};
1004		};
1005
1006		ufshc: ufshc@1da4000 {
1007			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
1008			reg = <0x01da4000 0x2500>;
1009			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1010			phys = <&ufsphy_lanes>;
1011			phy-names = "ufsphy";
1012			lanes-per-direction = <2>;
1013			power-domains = <&gcc UFS_GDSC>;
1014			status = "disabled";
1015			#reset-cells = <1>;
1016
1017			clock-names =
1018				"core_clk",
1019				"bus_aggr_clk",
1020				"iface_clk",
1021				"core_clk_unipro",
1022				"ref_clk",
1023				"tx_lane0_sync_clk",
1024				"rx_lane0_sync_clk",
1025				"rx_lane1_sync_clk";
1026			clocks =
1027				<&gcc GCC_UFS_AXI_CLK>,
1028				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
1029				<&gcc GCC_UFS_AHB_CLK>,
1030				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
1031				<&rpmcc RPM_SMD_LN_BB_CLK1>,
1032				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
1033				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
1034				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
1035			freq-table-hz =
1036				<50000000 200000000>,
1037				<0 0>,
1038				<0 0>,
1039				<37500000 150000000>,
1040				<0 0>,
1041				<0 0>,
1042				<0 0>,
1043				<0 0>;
1044
1045			resets = <&gcc GCC_UFS_BCR>;
1046			reset-names = "rst";
1047		};
1048
1049		ufsphy: phy@1da7000 {
1050			compatible = "qcom,msm8998-qmp-ufs-phy";
1051			reg = <0x01da7000 0x18c>;
1052			#address-cells = <1>;
1053			#size-cells = <1>;
1054			status = "disabled";
1055			ranges;
1056
1057			clock-names =
1058				"ref",
1059				"ref_aux";
1060			clocks =
1061				<&gcc GCC_UFS_CLKREF_CLK>,
1062				<&gcc GCC_UFS_PHY_AUX_CLK>;
1063
1064			reset-names = "ufsphy";
1065			resets = <&ufshc 0>;
1066
1067			ufsphy_lanes: phy@1da7400 {
1068				reg = <0x01da7400 0x128>,
1069				      <0x01da7600 0x1fc>,
1070				      <0x01da7c00 0x1dc>,
1071				      <0x01da7800 0x128>,
1072				      <0x01da7a00 0x1fc>;
1073				#phy-cells = <0>;
1074			};
1075		};
1076
1077		tcsr_mutex: hwlock@1f40000 {
1078			compatible = "qcom,tcsr-mutex";
1079			reg = <0x01f40000 0x20000>;
1080			#hwlock-cells = <1>;
1081		};
1082
1083		tcsr_regs_1: syscon@1f60000 {
1084			compatible = "qcom,msm8998-tcsr", "syscon";
1085			reg = <0x01f60000 0x20000>;
1086		};
1087
1088		tlmm: pinctrl@3400000 {
1089			compatible = "qcom,msm8998-pinctrl";
1090			reg = <0x03400000 0xc00000>;
1091			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1092			gpio-ranges = <&tlmm 0 0 150>;
1093			gpio-controller;
1094			#gpio-cells = <2>;
1095			interrupt-controller;
1096			#interrupt-cells = <2>;
1097
1098			sdc2_on: sdc2-on-state {
1099				clk-pins {
1100					pins = "sdc2_clk";
1101					drive-strength = <16>;
1102					bias-disable;
1103				};
1104
1105				cmd-pins {
1106					pins = "sdc2_cmd";
1107					drive-strength = <10>;
1108					bias-pull-up;
1109				};
1110
1111				data-pins {
1112					pins = "sdc2_data";
1113					drive-strength = <10>;
1114					bias-pull-up;
1115				};
1116			};
1117
1118			sdc2_off: sdc2-off-state {
1119				clk-pins {
1120					pins = "sdc2_clk";
1121					drive-strength = <2>;
1122					bias-disable;
1123				};
1124
1125				cmd-pins {
1126					pins = "sdc2_cmd";
1127					drive-strength = <2>;
1128					bias-pull-up;
1129				};
1130
1131				data-pins {
1132					pins = "sdc2_data";
1133					drive-strength = <2>;
1134					bias-pull-up;
1135				};
1136			};
1137
1138			sdc2_cd: sdc2-cd-state {
1139				pins = "gpio95";
1140				function = "gpio";
1141				bias-pull-up;
1142				drive-strength = <2>;
1143			};
1144
1145			blsp1_uart3_on: blsp1-uart3-on-state {
1146				tx-pins {
1147					pins = "gpio45";
1148					function = "blsp_uart3_a";
1149					drive-strength = <2>;
1150					bias-disable;
1151				};
1152
1153				rx-pins {
1154					pins = "gpio46";
1155					function = "blsp_uart3_a";
1156					drive-strength = <2>;
1157					bias-disable;
1158				};
1159
1160				cts-pins {
1161					pins = "gpio47";
1162					function = "blsp_uart3_a";
1163					drive-strength = <2>;
1164					bias-disable;
1165				};
1166
1167				rfr-pins {
1168					pins = "gpio48";
1169					function = "blsp_uart3_a";
1170					drive-strength = <2>;
1171					bias-disable;
1172				};
1173			};
1174
1175			blsp1_i2c1_default: blsp1-i2c1-default-state {
1176				pins = "gpio2", "gpio3";
1177				function = "blsp_i2c1";
1178				drive-strength = <2>;
1179				bias-disable;
1180			};
1181
1182			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
1183				pins = "gpio2", "gpio3";
1184				function = "blsp_i2c1";
1185				drive-strength = <2>;
1186				bias-pull-up;
1187			};
1188
1189			blsp1_i2c2_default: blsp1-i2c2-default-state {
1190				pins = "gpio32", "gpio33";
1191				function = "blsp_i2c2";
1192				drive-strength = <2>;
1193				bias-disable;
1194			};
1195
1196			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
1197				pins = "gpio32", "gpio33";
1198				function = "blsp_i2c2";
1199				drive-strength = <2>;
1200				bias-pull-up;
1201			};
1202
1203			blsp1_i2c3_default: blsp1-i2c3-default-state {
1204				pins = "gpio47", "gpio48";
1205				function = "blsp_i2c3";
1206				drive-strength = <2>;
1207				bias-disable;
1208			};
1209
1210			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
1211				pins = "gpio47", "gpio48";
1212				function = "blsp_i2c3";
1213				drive-strength = <2>;
1214				bias-pull-up;
1215			};
1216
1217			blsp1_i2c4_default: blsp1-i2c4-default-state {
1218				pins = "gpio10", "gpio11";
1219				function = "blsp_i2c4";
1220				drive-strength = <2>;
1221				bias-disable;
1222			};
1223
1224			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
1225				pins = "gpio10", "gpio11";
1226				function = "blsp_i2c4";
1227				drive-strength = <2>;
1228				bias-pull-up;
1229			};
1230
1231			blsp1_i2c5_default: blsp1-i2c5-default-state {
1232				pins = "gpio87", "gpio88";
1233				function = "blsp_i2c5";
1234				drive-strength = <2>;
1235				bias-disable;
1236			};
1237
1238			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
1239				pins = "gpio87", "gpio88";
1240				function = "blsp_i2c5";
1241				drive-strength = <2>;
1242				bias-pull-up;
1243			};
1244
1245			blsp1_i2c6_default: blsp1-i2c6-default-state {
1246				pins = "gpio43", "gpio44";
1247				function = "blsp_i2c6";
1248				drive-strength = <2>;
1249				bias-disable;
1250			};
1251
1252			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
1253				pins = "gpio43", "gpio44";
1254				function = "blsp_i2c6";
1255				drive-strength = <2>;
1256				bias-pull-up;
1257			};
1258
1259			blsp1_spi_b_default: blsp1-spi-b-default-state {
1260				pins = "gpio23", "gpio28";
1261				function = "blsp1_spi_b";
1262				drive-strength = <6>;
1263				bias-disable;
1264			};
1265
1266			blsp1_spi1_default: blsp1-spi1-default-state {
1267				pins = "gpio0", "gpio1", "gpio2", "gpio3";
1268				function = "blsp_spi1";
1269				drive-strength = <6>;
1270				bias-disable;
1271			};
1272
1273			blsp1_spi2_default: blsp1-spi2-default-state {
1274				pins = "gpio31", "gpio34", "gpio32", "gpio33";
1275				function = "blsp_spi2";
1276				drive-strength = <6>;
1277				bias-disable;
1278			};
1279
1280			blsp1_spi3_default: blsp1-spi3-default-state {
1281				pins = "gpio45", "gpio46", "gpio47", "gpio48";
1282				function = "blsp_spi2";
1283				drive-strength = <6>;
1284				bias-disable;
1285			};
1286
1287			blsp1_spi4_default: blsp1-spi4-default-state {
1288				pins = "gpio8", "gpio9", "gpio10", "gpio11";
1289				function = "blsp_spi4";
1290				drive-strength = <6>;
1291				bias-disable;
1292			};
1293
1294			blsp1_spi5_default: blsp1-spi5-default-state {
1295				pins = "gpio85", "gpio86", "gpio87", "gpio88";
1296				function = "blsp_spi5";
1297				drive-strength = <6>;
1298				bias-disable;
1299			};
1300
1301			blsp1_spi6_default: blsp1-spi6-default-state {
1302				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1303				function = "blsp_spi6";
1304				drive-strength = <6>;
1305				bias-disable;
1306			};
1307
1308
1309			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
1310			blsp2_i2c1_default: blsp2-i2c1-default-state {
1311				pins = "gpio55", "gpio56";
1312				function = "blsp_i2c7";
1313				drive-strength = <2>;
1314				bias-disable;
1315			};
1316
1317			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
1318				pins = "gpio55", "gpio56";
1319				function = "blsp_i2c7";
1320				drive-strength = <2>;
1321				bias-pull-up;
1322			};
1323
1324			blsp2_i2c2_default: blsp2-i2c2-default-state {
1325				pins = "gpio6", "gpio7";
1326				function = "blsp_i2c8";
1327				drive-strength = <2>;
1328				bias-disable;
1329			};
1330
1331			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
1332				pins = "gpio6", "gpio7";
1333				function = "blsp_i2c8";
1334				drive-strength = <2>;
1335				bias-pull-up;
1336			};
1337
1338			blsp2_i2c3_default: blsp2-i2c3-default-state {
1339				pins = "gpio51", "gpio52";
1340				function = "blsp_i2c9";
1341				drive-strength = <2>;
1342				bias-disable;
1343			};
1344
1345			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
1346				pins = "gpio51", "gpio52";
1347				function = "blsp_i2c9";
1348				drive-strength = <2>;
1349				bias-pull-up;
1350			};
1351
1352			blsp2_i2c4_default: blsp2-i2c4-default-state {
1353				pins = "gpio67", "gpio68";
1354				function = "blsp_i2c10";
1355				drive-strength = <2>;
1356				bias-disable;
1357			};
1358
1359			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
1360				pins = "gpio67", "gpio68";
1361				function = "blsp_i2c10";
1362				drive-strength = <2>;
1363				bias-pull-up;
1364			};
1365
1366			blsp2_i2c5_default: blsp2-i2c5-default-state {
1367				pins = "gpio60", "gpio61";
1368				function = "blsp_i2c11";
1369				drive-strength = <2>;
1370				bias-disable;
1371			};
1372
1373			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
1374				pins = "gpio60", "gpio61";
1375				function = "blsp_i2c11";
1376				drive-strength = <2>;
1377				bias-pull-up;
1378			};
1379
1380			blsp2_i2c6_default: blsp2-i2c6-default-state {
1381				pins = "gpio83", "gpio84";
1382				function = "blsp_i2c12";
1383				drive-strength = <2>;
1384				bias-disable;
1385			};
1386
1387			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
1388				pins = "gpio83", "gpio84";
1389				function = "blsp_i2c12";
1390				drive-strength = <2>;
1391				bias-pull-up;
1392			};
1393
1394			blsp2_spi1_default: blsp2-spi1-default-state {
1395				pins = "gpio53", "gpio54", "gpio55", "gpio56";
1396				function = "blsp_spi7";
1397				drive-strength = <6>;
1398				bias-disable;
1399			};
1400
1401			blsp2_spi2_default: blsp2-spi2-default-state {
1402				pins = "gpio4", "gpio5", "gpio6", "gpio7";
1403				function = "blsp_spi8";
1404				drive-strength = <6>;
1405				bias-disable;
1406			};
1407
1408			blsp2_spi3_default: blsp2-spi3-default-state {
1409				pins = "gpio49", "gpio50", "gpio51", "gpio52";
1410				function = "blsp_spi9";
1411				drive-strength = <6>;
1412				bias-disable;
1413			};
1414
1415			blsp2_spi4_default: blsp2-spi4-default-state {
1416				pins = "gpio65", "gpio66", "gpio67", "gpio68";
1417				function = "blsp_spi10";
1418				drive-strength = <6>;
1419				bias-disable;
1420			};
1421
1422			blsp2_spi5_default: blsp2-spi5-default-state {
1423				pins = "gpio58", "gpio59", "gpio60", "gpio61";
1424				function = "blsp_spi11";
1425				drive-strength = <6>;
1426				bias-disable;
1427			};
1428
1429			blsp2_spi6_default: blsp2-spi6-default-state {
1430				pins = "gpio81", "gpio82", "gpio83", "gpio84";
1431				function = "blsp_spi12";
1432				drive-strength = <6>;
1433				bias-disable;
1434			};
1435		};
1436
1437		remoteproc_mss: remoteproc@4080000 {
1438			compatible = "qcom,msm8998-mss-pil";
1439			reg = <0x04080000 0x100>, <0x04180000 0x20>;
1440			reg-names = "qdsp6", "rmb";
1441
1442			interrupts-extended =
1443				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
1444				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1445				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1446				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1447				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1448				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1449			interrupt-names = "wdog", "fatal", "ready",
1450					  "handover", "stop-ack",
1451					  "shutdown-ack";
1452
1453			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1454				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
1455				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1456				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
1457				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
1458				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
1459				 <&rpmcc RPM_SMD_QDSS_CLK>,
1460				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1461			clock-names = "iface", "bus", "mem", "gpll0_mss",
1462				      "snoc_axi", "mnoc_axi", "qdss", "xo";
1463
1464			qcom,smem-states = <&modem_smp2p_out 0>;
1465			qcom,smem-state-names = "stop";
1466
1467			resets = <&gcc GCC_MSS_RESTART>;
1468			reset-names = "mss_restart";
1469
1470			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
1471
1472			power-domains = <&rpmpd MSM8998_VDDCX>,
1473					<&rpmpd MSM8998_VDDMX>;
1474			power-domain-names = "cx", "mx";
1475
1476			status = "disabled";
1477
1478			mba {
1479				memory-region = <&mba_mem>;
1480			};
1481
1482			mpss {
1483				memory-region = <&mpss_mem>;
1484			};
1485
1486			metadata {
1487				memory-region = <&mdata_mem>;
1488			};
1489
1490			glink-edge {
1491				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
1492				label = "modem";
1493				qcom,remote-pid = <1>;
1494				mboxes = <&apcs_glb 15>;
1495			};
1496		};
1497
1498		adreno_gpu: gpu@5000000 {
1499			compatible = "qcom,adreno-540.1", "qcom,adreno";
1500			reg = <0x05000000 0x40000>;
1501			reg-names = "kgsl_3d0_reg_memory";
1502
1503			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1504				<&gpucc RBBMTIMER_CLK>,
1505				<&gcc GCC_BIMC_GFX_CLK>,
1506				<&gcc GCC_GPU_BIMC_GFX_CLK>,
1507				<&gpucc RBCPR_CLK>,
1508				<&gpucc GFX3D_CLK>;
1509			clock-names = "iface",
1510				"rbbmtimer",
1511				"mem",
1512				"mem_iface",
1513				"rbcpr",
1514				"core";
1515
1516			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
1517			iommus = <&adreno_smmu 0>;
1518			operating-points-v2 = <&gpu_opp_table>;
1519			power-domains = <&rpmpd MSM8998_VDDMX>;
1520			status = "disabled";
1521
1522			gpu_opp_table: opp-table {
1523				compatible = "operating-points-v2";
1524				opp-710000097 {
1525					opp-hz = /bits/ 64 <710000097>;
1526					opp-level = <RPM_SMD_LEVEL_TURBO>;
1527					opp-supported-hw = <0xff>;
1528				};
1529
1530				opp-670000048 {
1531					opp-hz = /bits/ 64 <670000048>;
1532					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
1533					opp-supported-hw = <0xff>;
1534				};
1535
1536				opp-596000097 {
1537					opp-hz = /bits/ 64 <596000097>;
1538					opp-level = <RPM_SMD_LEVEL_NOM>;
1539					opp-supported-hw = <0xff>;
1540				};
1541
1542				opp-515000097 {
1543					opp-hz = /bits/ 64 <515000097>;
1544					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
1545					opp-supported-hw = <0xff>;
1546				};
1547
1548				opp-414000000 {
1549					opp-hz = /bits/ 64 <414000000>;
1550					opp-level = <RPM_SMD_LEVEL_SVS>;
1551					opp-supported-hw = <0xff>;
1552				};
1553
1554				opp-342000000 {
1555					opp-hz = /bits/ 64 <342000000>;
1556					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
1557					opp-supported-hw = <0xff>;
1558				};
1559
1560				opp-257000000 {
1561					opp-hz = /bits/ 64 <257000000>;
1562					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
1563					opp-supported-hw = <0xff>;
1564				};
1565			};
1566		};
1567
1568		adreno_smmu: iommu@5040000 {
1569			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
1570			reg = <0x05040000 0x10000>;
1571			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1572				 <&gcc GCC_BIMC_GFX_CLK>,
1573				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
1574			clock-names = "iface", "mem", "mem_iface";
1575
1576			#global-interrupts = <0>;
1577			#iommu-cells = <1>;
1578			interrupts =
1579				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1580				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
1581				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1582			/*
1583			 * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
1584			 * GPU-CX for SMMU but we need both of them up for Adreno.
1585			 * Contemporarily, we also need to manage the VDDMX rpmpd
1586			 * domain in the Adreno driver.
1587			 * Enable GPU CX/GX GDSCs here so that we can manage the
1588			 * SoC VDDMX RPM Power Domain in the Adreno driver.
1589			 */
1590			power-domains = <&gpucc GPU_GX_GDSC>;
1591		};
1592
1593		gpucc: clock-controller@5065000 {
1594			compatible = "qcom,msm8998-gpucc";
1595			#clock-cells = <1>;
1596			#reset-cells = <1>;
1597			#power-domain-cells = <1>;
1598			reg = <0x05065000 0x9000>;
1599
1600			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1601				 <&gcc GCC_GPU_GPLL0_CLK>;
1602			clock-names = "xo",
1603				      "gpll0";
1604		};
1605
1606		remoteproc_slpi: remoteproc@5800000 {
1607			compatible = "qcom,msm8998-slpi-pas";
1608			reg = <0x05800000 0x4040>;
1609
1610			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
1611					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1612					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1613					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1614					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1615			interrupt-names = "wdog", "fatal", "ready",
1616					  "handover", "stop-ack";
1617
1618			px-supply = <&vreg_lvs2a_1p8>;
1619
1620			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1621				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
1622			clock-names = "xo", "aggre2";
1623
1624			memory-region = <&slpi_mem>;
1625
1626			qcom,smem-states = <&slpi_smp2p_out 0>;
1627			qcom,smem-state-names = "stop";
1628
1629			power-domains = <&rpmpd MSM8998_SSCCX>;
1630			power-domain-names = "ssc_cx";
1631
1632			status = "disabled";
1633
1634			glink-edge {
1635				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
1636				label = "dsps";
1637				qcom,remote-pid = <3>;
1638				mboxes = <&apcs_glb 27>;
1639			};
1640		};
1641
1642		stm: stm@6002000 {
1643			compatible = "arm,coresight-stm", "arm,primecell";
1644			reg = <0x06002000 0x1000>,
1645			      <0x16280000 0x180000>;
1646			reg-names = "stm-base", "stm-stimulus-base";
1647			status = "disabled";
1648
1649			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1650			clock-names = "apb_pclk", "atclk";
1651
1652			out-ports {
1653				port {
1654					stm_out: endpoint {
1655						remote-endpoint = <&funnel0_in7>;
1656					};
1657				};
1658			};
1659		};
1660
1661		funnel1: funnel@6041000 {
1662			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1663			reg = <0x06041000 0x1000>;
1664			status = "disabled";
1665
1666			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1667			clock-names = "apb_pclk", "atclk";
1668
1669			out-ports {
1670				port {
1671					funnel0_out: endpoint {
1672						remote-endpoint =
1673						  <&merge_funnel_in0>;
1674					};
1675				};
1676			};
1677
1678			in-ports {
1679				#address-cells = <1>;
1680				#size-cells = <0>;
1681
1682				port@7 {
1683					reg = <7>;
1684					funnel0_in7: endpoint {
1685						remote-endpoint = <&stm_out>;
1686					};
1687				};
1688			};
1689		};
1690
1691		funnel2: funnel@6042000 {
1692			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1693			reg = <0x06042000 0x1000>;
1694			status = "disabled";
1695
1696			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1697			clock-names = "apb_pclk", "atclk";
1698
1699			out-ports {
1700				port {
1701					funnel1_out: endpoint {
1702						remote-endpoint =
1703						  <&merge_funnel_in1>;
1704					};
1705				};
1706			};
1707
1708			in-ports {
1709				#address-cells = <1>;
1710				#size-cells = <0>;
1711
1712				port@6 {
1713					reg = <6>;
1714					funnel1_in6: endpoint {
1715						remote-endpoint =
1716						  <&apss_merge_funnel_out>;
1717					};
1718				};
1719			};
1720		};
1721
1722		funnel3: funnel@6045000 {
1723			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1724			reg = <0x06045000 0x1000>;
1725			status = "disabled";
1726
1727			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1728			clock-names = "apb_pclk", "atclk";
1729
1730			out-ports {
1731				port {
1732					merge_funnel_out: endpoint {
1733						remote-endpoint =
1734						  <&etf_in>;
1735					};
1736				};
1737			};
1738
1739			in-ports {
1740				#address-cells = <1>;
1741				#size-cells = <0>;
1742
1743				port@0 {
1744					reg = <0>;
1745					merge_funnel_in0: endpoint {
1746						remote-endpoint =
1747						  <&funnel0_out>;
1748					};
1749				};
1750
1751				port@1 {
1752					reg = <1>;
1753					merge_funnel_in1: endpoint {
1754						remote-endpoint =
1755						  <&funnel1_out>;
1756					};
1757				};
1758			};
1759		};
1760
1761		replicator1: replicator@6046000 {
1762			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1763			reg = <0x06046000 0x1000>;
1764			status = "disabled";
1765
1766			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1767			clock-names = "apb_pclk", "atclk";
1768
1769			out-ports {
1770				port {
1771					replicator_out: endpoint {
1772						remote-endpoint = <&etr_in>;
1773					};
1774				};
1775			};
1776
1777			in-ports {
1778				port {
1779					replicator_in: endpoint {
1780						remote-endpoint = <&etf_out>;
1781					};
1782				};
1783			};
1784		};
1785
1786		etf: etf@6047000 {
1787			compatible = "arm,coresight-tmc", "arm,primecell";
1788			reg = <0x06047000 0x1000>;
1789			status = "disabled";
1790
1791			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1792			clock-names = "apb_pclk", "atclk";
1793
1794			out-ports {
1795				port {
1796					etf_out: endpoint {
1797						remote-endpoint =
1798						  <&replicator_in>;
1799					};
1800				};
1801			};
1802
1803			in-ports {
1804				port {
1805					etf_in: endpoint {
1806						remote-endpoint =
1807						  <&merge_funnel_out>;
1808					};
1809				};
1810			};
1811		};
1812
1813		etr: etr@6048000 {
1814			compatible = "arm,coresight-tmc", "arm,primecell";
1815			reg = <0x06048000 0x1000>;
1816			status = "disabled";
1817
1818			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1819			clock-names = "apb_pclk", "atclk";
1820			arm,scatter-gather;
1821
1822			in-ports {
1823				port {
1824					etr_in: endpoint {
1825						remote-endpoint =
1826						  <&replicator_out>;
1827					};
1828				};
1829			};
1830		};
1831
1832		etm1: etm@7840000 {
1833			compatible = "arm,coresight-etm4x", "arm,primecell";
1834			reg = <0x07840000 0x1000>;
1835			status = "disabled";
1836
1837			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1838			clock-names = "apb_pclk", "atclk";
1839
1840			cpu = <&CPU0>;
1841
1842			out-ports {
1843				port {
1844					etm0_out: endpoint {
1845						remote-endpoint =
1846						  <&apss_funnel_in0>;
1847					};
1848				};
1849			};
1850		};
1851
1852		etm2: etm@7940000 {
1853			compatible = "arm,coresight-etm4x", "arm,primecell";
1854			reg = <0x07940000 0x1000>;
1855			status = "disabled";
1856
1857			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1858			clock-names = "apb_pclk", "atclk";
1859
1860			cpu = <&CPU1>;
1861
1862			out-ports {
1863				port {
1864					etm1_out: endpoint {
1865						remote-endpoint =
1866						  <&apss_funnel_in1>;
1867					};
1868				};
1869			};
1870		};
1871
1872		etm3: etm@7a40000 {
1873			compatible = "arm,coresight-etm4x", "arm,primecell";
1874			reg = <0x07a40000 0x1000>;
1875			status = "disabled";
1876
1877			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1878			clock-names = "apb_pclk", "atclk";
1879
1880			cpu = <&CPU2>;
1881
1882			out-ports {
1883				port {
1884					etm2_out: endpoint {
1885						remote-endpoint =
1886						  <&apss_funnel_in2>;
1887					};
1888				};
1889			};
1890		};
1891
1892		etm4: etm@7b40000 {
1893			compatible = "arm,coresight-etm4x", "arm,primecell";
1894			reg = <0x07b40000 0x1000>;
1895			status = "disabled";
1896
1897			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1898			clock-names = "apb_pclk", "atclk";
1899
1900			cpu = <&CPU3>;
1901
1902			out-ports {
1903				port {
1904					etm3_out: endpoint {
1905						remote-endpoint =
1906						  <&apss_funnel_in3>;
1907					};
1908				};
1909			};
1910		};
1911
1912		funnel4: funnel@7b60000 { /* APSS Funnel */
1913			compatible = "arm,coresight-etm4x", "arm,primecell";
1914			reg = <0x07b60000 0x1000>;
1915			status = "disabled";
1916
1917			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1918			clock-names = "apb_pclk", "atclk";
1919
1920			out-ports {
1921				port {
1922					apss_funnel_out: endpoint {
1923						remote-endpoint =
1924						  <&apss_merge_funnel_in>;
1925					};
1926				};
1927			};
1928
1929			in-ports {
1930				#address-cells = <1>;
1931				#size-cells = <0>;
1932
1933				port@0 {
1934					reg = <0>;
1935					apss_funnel_in0: endpoint {
1936						remote-endpoint =
1937						  <&etm0_out>;
1938					};
1939				};
1940
1941				port@1 {
1942					reg = <1>;
1943					apss_funnel_in1: endpoint {
1944						remote-endpoint =
1945						  <&etm1_out>;
1946					};
1947				};
1948
1949				port@2 {
1950					reg = <2>;
1951					apss_funnel_in2: endpoint {
1952						remote-endpoint =
1953						  <&etm2_out>;
1954					};
1955				};
1956
1957				port@3 {
1958					reg = <3>;
1959					apss_funnel_in3: endpoint {
1960						remote-endpoint =
1961						  <&etm3_out>;
1962					};
1963				};
1964
1965				port@4 {
1966					reg = <4>;
1967					apss_funnel_in4: endpoint {
1968						remote-endpoint =
1969						  <&etm4_out>;
1970					};
1971				};
1972
1973				port@5 {
1974					reg = <5>;
1975					apss_funnel_in5: endpoint {
1976						remote-endpoint =
1977						  <&etm5_out>;
1978					};
1979				};
1980
1981				port@6 {
1982					reg = <6>;
1983					apss_funnel_in6: endpoint {
1984						remote-endpoint =
1985						  <&etm6_out>;
1986					};
1987				};
1988
1989				port@7 {
1990					reg = <7>;
1991					apss_funnel_in7: endpoint {
1992						remote-endpoint =
1993						  <&etm7_out>;
1994					};
1995				};
1996			};
1997		};
1998
1999		funnel5: funnel@7b70000 {
2000			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2001			reg = <0x07b70000 0x1000>;
2002			status = "disabled";
2003
2004			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2005			clock-names = "apb_pclk", "atclk";
2006
2007			out-ports {
2008				port {
2009					apss_merge_funnel_out: endpoint {
2010						remote-endpoint =
2011						  <&funnel1_in6>;
2012					};
2013				};
2014			};
2015
2016			in-ports {
2017				port {
2018					apss_merge_funnel_in: endpoint {
2019						remote-endpoint =
2020						  <&apss_funnel_out>;
2021					};
2022				};
2023			};
2024		};
2025
2026		etm5: etm@7c40000 {
2027			compatible = "arm,coresight-etm4x", "arm,primecell";
2028			reg = <0x07c40000 0x1000>;
2029			status = "disabled";
2030
2031			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2032			clock-names = "apb_pclk", "atclk";
2033
2034			cpu = <&CPU4>;
2035
2036			out-ports {
2037				port {
2038					etm4_out: endpoint {
2039						remote-endpoint = <&apss_funnel_in4>;
2040					};
2041				};
2042			};
2043		};
2044
2045		etm6: etm@7d40000 {
2046			compatible = "arm,coresight-etm4x", "arm,primecell";
2047			reg = <0x07d40000 0x1000>;
2048			status = "disabled";
2049
2050			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2051			clock-names = "apb_pclk", "atclk";
2052
2053			cpu = <&CPU5>;
2054
2055			out-ports {
2056				port {
2057					etm5_out: endpoint {
2058						remote-endpoint = <&apss_funnel_in5>;
2059					};
2060				};
2061			};
2062		};
2063
2064		etm7: etm@7e40000 {
2065			compatible = "arm,coresight-etm4x", "arm,primecell";
2066			reg = <0x07e40000 0x1000>;
2067			status = "disabled";
2068
2069			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2070			clock-names = "apb_pclk", "atclk";
2071
2072			cpu = <&CPU6>;
2073
2074			out-ports {
2075				port {
2076					etm6_out: endpoint {
2077						remote-endpoint = <&apss_funnel_in6>;
2078					};
2079				};
2080			};
2081		};
2082
2083		etm8: etm@7f40000 {
2084			compatible = "arm,coresight-etm4x", "arm,primecell";
2085			reg = <0x07f40000 0x1000>;
2086			status = "disabled";
2087
2088			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2089			clock-names = "apb_pclk", "atclk";
2090
2091			cpu = <&CPU7>;
2092
2093			out-ports {
2094				port {
2095					etm7_out: endpoint {
2096						remote-endpoint = <&apss_funnel_in7>;
2097					};
2098				};
2099			};
2100		};
2101
2102		sram@290000 {
2103			compatible = "qcom,rpm-stats";
2104			reg = <0x00290000 0x10000>;
2105		};
2106
2107		spmi_bus: spmi@800f000 {
2108			compatible = "qcom,spmi-pmic-arb";
2109			reg = <0x0800f000 0x1000>,
2110			      <0x08400000 0x1000000>,
2111			      <0x09400000 0x1000000>,
2112			      <0x0a400000 0x220000>,
2113			      <0x0800a000 0x3000>;
2114			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2115			interrupt-names = "periph_irq";
2116			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
2117			qcom,ee = <0>;
2118			qcom,channel = <0>;
2119			#address-cells = <2>;
2120			#size-cells = <0>;
2121			interrupt-controller;
2122			#interrupt-cells = <4>;
2123		};
2124
2125		usb3: usb@a8f8800 {
2126			compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
2127			reg = <0x0a8f8800 0x400>;
2128			status = "disabled";
2129			#address-cells = <1>;
2130			#size-cells = <1>;
2131			ranges;
2132
2133			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
2134				 <&gcc GCC_USB30_MASTER_CLK>,
2135				 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
2136				 <&gcc GCC_USB30_SLEEP_CLK>,
2137				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
2138			clock-names = "cfg_noc",
2139				      "core",
2140				      "iface",
2141				      "sleep",
2142				      "mock_utmi";
2143
2144			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2145					  <&gcc GCC_USB30_MASTER_CLK>;
2146			assigned-clock-rates = <19200000>, <120000000>;
2147
2148			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
2149				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2150			interrupt-names = "hs_phy_irq", "ss_phy_irq";
2151
2152			power-domains = <&gcc USB_30_GDSC>;
2153
2154			resets = <&gcc GCC_USB_30_BCR>;
2155
2156			usb3_dwc3: usb@a800000 {
2157				compatible = "snps,dwc3";
2158				reg = <0x0a800000 0xcd00>;
2159				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
2160				snps,dis_u2_susphy_quirk;
2161				snps,dis_enblslpm_quirk;
2162				snps,parkmode-disable-ss-quirk;
2163				phys = <&qusb2phy>, <&usb3phy>;
2164				phy-names = "usb2-phy", "usb3-phy";
2165				snps,has-lpm-erratum;
2166				snps,hird-threshold = /bits/ 8 <0x10>;
2167			};
2168		};
2169
2170		usb3phy: phy@c010000 {
2171			compatible = "qcom,msm8998-qmp-usb3-phy";
2172			reg = <0x0c010000 0x1000>;
2173
2174			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
2175				 <&gcc GCC_USB3_CLKREF_CLK>,
2176				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2177				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
2178			clock-names = "aux",
2179				      "ref",
2180				      "cfg_ahb",
2181				      "pipe";
2182			clock-output-names = "usb3_phy_pipe_clk_src";
2183			#clock-cells = <0>;
2184			#phy-cells = <0>;
2185
2186			resets = <&gcc GCC_USB3_PHY_BCR>,
2187				 <&gcc GCC_USB3PHY_PHY_BCR>;
2188			reset-names = "phy",
2189				      "phy_phy";
2190
2191			status = "disabled";
2192		};
2193
2194		qusb2phy: phy@c012000 {
2195			compatible = "qcom,msm8998-qusb2-phy";
2196			reg = <0x0c012000 0x2a8>;
2197			status = "disabled";
2198			#phy-cells = <0>;
2199
2200			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2201				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
2202			clock-names = "cfg_ahb", "ref";
2203
2204			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2205
2206			nvmem-cells = <&qusb2_hstx_trim>;
2207		};
2208
2209		sdhc2: mmc@c0a4900 {
2210			compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
2211			reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
2212			reg-names = "hc", "core";
2213
2214			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
2215				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
2216			interrupt-names = "hc_irq", "pwr_irq";
2217
2218			clock-names = "iface", "core", "xo";
2219			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2220				 <&gcc GCC_SDCC2_APPS_CLK>,
2221				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2222			bus-width = <4>;
2223			status = "disabled";
2224		};
2225
2226		blsp1_dma: dma-controller@c144000 {
2227			compatible = "qcom,bam-v1.7.0";
2228			reg = <0x0c144000 0x25000>;
2229			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
2230			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
2231			clock-names = "bam_clk";
2232			#dma-cells = <1>;
2233			qcom,ee = <0>;
2234			qcom,controlled-remotely;
2235			num-channels = <18>;
2236			qcom,num-ees = <4>;
2237		};
2238
2239		blsp1_uart3: serial@c171000 {
2240			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2241			reg = <0x0c171000 0x1000>;
2242			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
2243			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
2244				 <&gcc GCC_BLSP1_AHB_CLK>;
2245			clock-names = "core", "iface";
2246			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
2247			dma-names = "tx", "rx";
2248			pinctrl-names = "default";
2249			pinctrl-0 = <&blsp1_uart3_on>;
2250			status = "disabled";
2251		};
2252
2253		blsp1_i2c1: i2c@c175000 {
2254			compatible = "qcom,i2c-qup-v2.2.1";
2255			reg = <0x0c175000 0x600>;
2256			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2257
2258			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
2259				 <&gcc GCC_BLSP1_AHB_CLK>;
2260			clock-names = "core", "iface";
2261			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2262			dma-names = "tx", "rx";
2263			pinctrl-names = "default", "sleep";
2264			pinctrl-0 = <&blsp1_i2c1_default>;
2265			pinctrl-1 = <&blsp1_i2c1_sleep>;
2266			clock-frequency = <400000>;
2267
2268			status = "disabled";
2269			#address-cells = <1>;
2270			#size-cells = <0>;
2271		};
2272
2273		blsp1_i2c2: i2c@c176000 {
2274			compatible = "qcom,i2c-qup-v2.2.1";
2275			reg = <0x0c176000 0x600>;
2276			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2277
2278			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
2279				 <&gcc GCC_BLSP1_AHB_CLK>;
2280			clock-names = "core", "iface";
2281			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2282			dma-names = "tx", "rx";
2283			pinctrl-names = "default", "sleep";
2284			pinctrl-0 = <&blsp1_i2c2_default>;
2285			pinctrl-1 = <&blsp1_i2c2_sleep>;
2286			clock-frequency = <400000>;
2287
2288			status = "disabled";
2289			#address-cells = <1>;
2290			#size-cells = <0>;
2291		};
2292
2293		blsp1_i2c3: i2c@c177000 {
2294			compatible = "qcom,i2c-qup-v2.2.1";
2295			reg = <0x0c177000 0x600>;
2296			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2297
2298			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
2299				 <&gcc GCC_BLSP1_AHB_CLK>;
2300			clock-names = "core", "iface";
2301			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2302			dma-names = "tx", "rx";
2303			pinctrl-names = "default", "sleep";
2304			pinctrl-0 = <&blsp1_i2c3_default>;
2305			pinctrl-1 = <&blsp1_i2c3_sleep>;
2306			clock-frequency = <400000>;
2307
2308			status = "disabled";
2309			#address-cells = <1>;
2310			#size-cells = <0>;
2311		};
2312
2313		blsp1_i2c4: i2c@c178000 {
2314			compatible = "qcom,i2c-qup-v2.2.1";
2315			reg = <0x0c178000 0x600>;
2316			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2317
2318			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
2319				 <&gcc GCC_BLSP1_AHB_CLK>;
2320			clock-names = "core", "iface";
2321			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2322			dma-names = "tx", "rx";
2323			pinctrl-names = "default", "sleep";
2324			pinctrl-0 = <&blsp1_i2c4_default>;
2325			pinctrl-1 = <&blsp1_i2c4_sleep>;
2326			clock-frequency = <400000>;
2327
2328			status = "disabled";
2329			#address-cells = <1>;
2330			#size-cells = <0>;
2331		};
2332
2333		blsp1_i2c5: i2c@c179000 {
2334			compatible = "qcom,i2c-qup-v2.2.1";
2335			reg = <0x0c179000 0x600>;
2336			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2337
2338			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
2339				 <&gcc GCC_BLSP1_AHB_CLK>;
2340			clock-names = "core", "iface";
2341			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2342			dma-names = "tx", "rx";
2343			pinctrl-names = "default", "sleep";
2344			pinctrl-0 = <&blsp1_i2c5_default>;
2345			pinctrl-1 = <&blsp1_i2c5_sleep>;
2346			clock-frequency = <400000>;
2347
2348			status = "disabled";
2349			#address-cells = <1>;
2350			#size-cells = <0>;
2351		};
2352
2353		blsp1_i2c6: i2c@c17a000 {
2354			compatible = "qcom,i2c-qup-v2.2.1";
2355			reg = <0x0c17a000 0x600>;
2356			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2357
2358			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
2359				 <&gcc GCC_BLSP1_AHB_CLK>;
2360			clock-names = "core", "iface";
2361			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2362			dma-names = "tx", "rx";
2363			pinctrl-names = "default", "sleep";
2364			pinctrl-0 = <&blsp1_i2c6_default>;
2365			pinctrl-1 = <&blsp1_i2c6_sleep>;
2366			clock-frequency = <400000>;
2367
2368			status = "disabled";
2369			#address-cells = <1>;
2370			#size-cells = <0>;
2371		};
2372
2373		blsp1_spi1: spi@c175000 {
2374			compatible = "qcom,spi-qup-v2.2.1";
2375			reg = <0x0c175000 0x600>;
2376			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2377
2378			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
2379				 <&gcc GCC_BLSP1_AHB_CLK>;
2380			clock-names = "core", "iface";
2381			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2382			dma-names = "tx", "rx";
2383			pinctrl-names = "default";
2384			pinctrl-0 = <&blsp1_spi1_default>;
2385
2386			status = "disabled";
2387			#address-cells = <1>;
2388			#size-cells = <0>;
2389		};
2390
2391		blsp1_spi2: spi@c176000 {
2392			compatible = "qcom,spi-qup-v2.2.1";
2393			reg = <0x0c176000 0x600>;
2394			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2395
2396			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
2397				 <&gcc GCC_BLSP1_AHB_CLK>;
2398			clock-names = "core", "iface";
2399			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2400			dma-names = "tx", "rx";
2401			pinctrl-names = "default";
2402			pinctrl-0 = <&blsp1_spi2_default>;
2403
2404			status = "disabled";
2405			#address-cells = <1>;
2406			#size-cells = <0>;
2407		};
2408
2409		blsp1_spi3: spi@c177000 {
2410			compatible = "qcom,spi-qup-v2.2.1";
2411			reg = <0x0c177000 0x600>;
2412			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2413
2414			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
2415				 <&gcc GCC_BLSP1_AHB_CLK>;
2416			clock-names = "core", "iface";
2417			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2418			dma-names = "tx", "rx";
2419			pinctrl-names = "default";
2420			pinctrl-0 = <&blsp1_spi3_default>;
2421
2422			status = "disabled";
2423			#address-cells = <1>;
2424			#size-cells = <0>;
2425		};
2426
2427		blsp1_spi4: spi@c178000 {
2428			compatible = "qcom,spi-qup-v2.2.1";
2429			reg = <0x0c178000 0x600>;
2430			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2431
2432			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
2433				 <&gcc GCC_BLSP1_AHB_CLK>;
2434			clock-names = "core", "iface";
2435			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2436			dma-names = "tx", "rx";
2437			pinctrl-names = "default";
2438			pinctrl-0 = <&blsp1_spi4_default>;
2439
2440			status = "disabled";
2441			#address-cells = <1>;
2442			#size-cells = <0>;
2443		};
2444
2445		blsp1_spi5: spi@c179000 {
2446			compatible = "qcom,spi-qup-v2.2.1";
2447			reg = <0x0c179000 0x600>;
2448			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2449
2450			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
2451				 <&gcc GCC_BLSP1_AHB_CLK>;
2452			clock-names = "core", "iface";
2453			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2454			dma-names = "tx", "rx";
2455			pinctrl-names = "default";
2456			pinctrl-0 = <&blsp1_spi5_default>;
2457
2458			status = "disabled";
2459			#address-cells = <1>;
2460			#size-cells = <0>;
2461		};
2462
2463		blsp1_spi6: spi@c17a000 {
2464			compatible = "qcom,spi-qup-v2.2.1";
2465			reg = <0x0c17a000 0x600>;
2466			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2467
2468			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
2469				 <&gcc GCC_BLSP1_AHB_CLK>;
2470			clock-names = "core", "iface";
2471			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2472			dma-names = "tx", "rx";
2473			pinctrl-names = "default";
2474			pinctrl-0 = <&blsp1_spi6_default>;
2475
2476			status = "disabled";
2477			#address-cells = <1>;
2478			#size-cells = <0>;
2479		};
2480
2481		blsp2_dma: dma-controller@c184000 {
2482			compatible = "qcom,bam-v1.7.0";
2483			reg = <0x0c184000 0x25000>;
2484			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
2485			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
2486			clock-names = "bam_clk";
2487			#dma-cells = <1>;
2488			qcom,ee = <0>;
2489			qcom,controlled-remotely;
2490			num-channels = <18>;
2491			qcom,num-ees = <4>;
2492		};
2493
2494		blsp2_uart1: serial@c1b0000 {
2495			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2496			reg = <0x0c1b0000 0x1000>;
2497			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2498			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2499				 <&gcc GCC_BLSP2_AHB_CLK>;
2500			clock-names = "core", "iface";
2501			status = "disabled";
2502		};
2503
2504		blsp2_i2c1: i2c@c1b5000 {
2505			compatible = "qcom,i2c-qup-v2.2.1";
2506			reg = <0x0c1b5000 0x600>;
2507			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2508
2509			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
2510				 <&gcc GCC_BLSP2_AHB_CLK>;
2511			clock-names = "core", "iface";
2512			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2513			dma-names = "tx", "rx";
2514			pinctrl-names = "default", "sleep";
2515			pinctrl-0 = <&blsp2_i2c1_default>;
2516			pinctrl-1 = <&blsp2_i2c1_sleep>;
2517			clock-frequency = <400000>;
2518
2519			status = "disabled";
2520			#address-cells = <1>;
2521			#size-cells = <0>;
2522		};
2523
2524		blsp2_i2c2: i2c@c1b6000 {
2525			compatible = "qcom,i2c-qup-v2.2.1";
2526			reg = <0x0c1b6000 0x600>;
2527			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2528
2529			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
2530				 <&gcc GCC_BLSP2_AHB_CLK>;
2531			clock-names = "core", "iface";
2532			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2533			dma-names = "tx", "rx";
2534			pinctrl-names = "default", "sleep";
2535			pinctrl-0 = <&blsp2_i2c2_default>;
2536			pinctrl-1 = <&blsp2_i2c2_sleep>;
2537			clock-frequency = <400000>;
2538
2539			status = "disabled";
2540			#address-cells = <1>;
2541			#size-cells = <0>;
2542		};
2543
2544		blsp2_i2c3: i2c@c1b7000 {
2545			compatible = "qcom,i2c-qup-v2.2.1";
2546			reg = <0x0c1b7000 0x600>;
2547			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2548
2549			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
2550				 <&gcc GCC_BLSP2_AHB_CLK>;
2551			clock-names = "core", "iface";
2552			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2553			dma-names = "tx", "rx";
2554			pinctrl-names = "default", "sleep";
2555			pinctrl-0 = <&blsp2_i2c3_default>;
2556			pinctrl-1 = <&blsp2_i2c3_sleep>;
2557			clock-frequency = <400000>;
2558
2559			status = "disabled";
2560			#address-cells = <1>;
2561			#size-cells = <0>;
2562		};
2563
2564		blsp2_i2c4: i2c@c1b8000 {
2565			compatible = "qcom,i2c-qup-v2.2.1";
2566			reg = <0x0c1b8000 0x600>;
2567			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2568
2569			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
2570				 <&gcc GCC_BLSP2_AHB_CLK>;
2571			clock-names = "core", "iface";
2572			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2573			dma-names = "tx", "rx";
2574			pinctrl-names = "default", "sleep";
2575			pinctrl-0 = <&blsp2_i2c4_default>;
2576			pinctrl-1 = <&blsp2_i2c4_sleep>;
2577			clock-frequency = <400000>;
2578
2579			status = "disabled";
2580			#address-cells = <1>;
2581			#size-cells = <0>;
2582		};
2583
2584		blsp2_i2c5: i2c@c1b9000 {
2585			compatible = "qcom,i2c-qup-v2.2.1";
2586			reg = <0x0c1b9000 0x600>;
2587			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2588
2589			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
2590				 <&gcc GCC_BLSP2_AHB_CLK>;
2591			clock-names = "core", "iface";
2592			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2593			dma-names = "tx", "rx";
2594			pinctrl-names = "default", "sleep";
2595			pinctrl-0 = <&blsp2_i2c5_default>;
2596			pinctrl-1 = <&blsp2_i2c5_sleep>;
2597			clock-frequency = <400000>;
2598
2599			status = "disabled";
2600			#address-cells = <1>;
2601			#size-cells = <0>;
2602		};
2603
2604		blsp2_i2c6: i2c@c1ba000 {
2605			compatible = "qcom,i2c-qup-v2.2.1";
2606			reg = <0x0c1ba000 0x600>;
2607			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2608
2609			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
2610				 <&gcc GCC_BLSP2_AHB_CLK>;
2611			clock-names = "core", "iface";
2612			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2613			dma-names = "tx", "rx";
2614			pinctrl-names = "default", "sleep";
2615			pinctrl-0 = <&blsp2_i2c6_default>;
2616			pinctrl-1 = <&blsp2_i2c6_sleep>;
2617			clock-frequency = <400000>;
2618
2619			status = "disabled";
2620			#address-cells = <1>;
2621			#size-cells = <0>;
2622		};
2623
2624		blsp2_spi1: spi@c1b5000 {
2625			compatible = "qcom,spi-qup-v2.2.1";
2626			reg = <0x0c1b5000 0x600>;
2627			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2628
2629			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
2630				 <&gcc GCC_BLSP2_AHB_CLK>;
2631			clock-names = "core", "iface";
2632			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2633			dma-names = "tx", "rx";
2634			pinctrl-names = "default";
2635			pinctrl-0 = <&blsp2_spi1_default>;
2636
2637			status = "disabled";
2638			#address-cells = <1>;
2639			#size-cells = <0>;
2640		};
2641
2642		blsp2_spi2: spi@c1b6000 {
2643			compatible = "qcom,spi-qup-v2.2.1";
2644			reg = <0x0c1b6000 0x600>;
2645			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2646
2647			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
2648				 <&gcc GCC_BLSP2_AHB_CLK>;
2649			clock-names = "core", "iface";
2650			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2651			dma-names = "tx", "rx";
2652			pinctrl-names = "default";
2653			pinctrl-0 = <&blsp2_spi2_default>;
2654
2655			status = "disabled";
2656			#address-cells = <1>;
2657			#size-cells = <0>;
2658		};
2659
2660		blsp2_spi3: spi@c1b7000 {
2661			compatible = "qcom,spi-qup-v2.2.1";
2662			reg = <0x0c1b7000 0x600>;
2663			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2664
2665			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
2666				 <&gcc GCC_BLSP2_AHB_CLK>;
2667			clock-names = "core", "iface";
2668			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2669			dma-names = "tx", "rx";
2670			pinctrl-names = "default";
2671			pinctrl-0 = <&blsp2_spi3_default>;
2672
2673			status = "disabled";
2674			#address-cells = <1>;
2675			#size-cells = <0>;
2676		};
2677
2678		blsp2_spi4: spi@c1b8000 {
2679			compatible = "qcom,spi-qup-v2.2.1";
2680			reg = <0x0c1b8000 0x600>;
2681			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2682
2683			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
2684				 <&gcc GCC_BLSP2_AHB_CLK>;
2685			clock-names = "core", "iface";
2686			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2687			dma-names = "tx", "rx";
2688			pinctrl-names = "default";
2689			pinctrl-0 = <&blsp2_spi4_default>;
2690
2691			status = "disabled";
2692			#address-cells = <1>;
2693			#size-cells = <0>;
2694		};
2695
2696		blsp2_spi5: spi@c1b9000 {
2697			compatible = "qcom,spi-qup-v2.2.1";
2698			reg = <0x0c1b9000 0x600>;
2699			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2700
2701			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
2702				 <&gcc GCC_BLSP2_AHB_CLK>;
2703			clock-names = "core", "iface";
2704			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2705			dma-names = "tx", "rx";
2706			pinctrl-names = "default";
2707			pinctrl-0 = <&blsp2_spi5_default>;
2708
2709			status = "disabled";
2710			#address-cells = <1>;
2711			#size-cells = <0>;
2712		};
2713
2714		blsp2_spi6: spi@c1ba000 {
2715			compatible = "qcom,spi-qup-v2.2.1";
2716			reg = <0x0c1ba000 0x600>;
2717			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2718
2719			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
2720				 <&gcc GCC_BLSP2_AHB_CLK>;
2721			clock-names = "core", "iface";
2722			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2723			dma-names = "tx", "rx";
2724			pinctrl-names = "default";
2725			pinctrl-0 = <&blsp2_spi6_default>;
2726
2727			status = "disabled";
2728			#address-cells = <1>;
2729			#size-cells = <0>;
2730		};
2731
2732		mmcc: clock-controller@c8c0000 {
2733			compatible = "qcom,mmcc-msm8998";
2734			#clock-cells = <1>;
2735			#reset-cells = <1>;
2736			#power-domain-cells = <1>;
2737			reg = <0xc8c0000 0x40000>;
2738
2739			clock-names = "xo",
2740				      "gpll0",
2741				      "dsi0dsi",
2742				      "dsi0byte",
2743				      "dsi1dsi",
2744				      "dsi1byte",
2745				      "hdmipll",
2746				      "dplink",
2747				      "dpvco",
2748				      "gpll0_div";
2749			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
2750				 <&gcc GCC_MMSS_GPLL0_CLK>,
2751				 <&mdss_dsi0_phy 1>,
2752				 <&mdss_dsi0_phy 0>,
2753				 <&mdss_dsi1_phy 1>,
2754				 <&mdss_dsi1_phy 0>,
2755				 <0>,
2756				 <0>,
2757				 <0>,
2758				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
2759		};
2760
2761		mdss: display-subsystem@c900000 {
2762			compatible = "qcom,msm8998-mdss";
2763			reg = <0x0c900000 0x1000>;
2764			reg-names = "mdss";
2765
2766			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2767			interrupt-controller;
2768			#interrupt-cells = <1>;
2769
2770			clocks = <&mmcc MDSS_AHB_CLK>,
2771				 <&mmcc MDSS_AXI_CLK>,
2772				 <&mmcc MDSS_MDP_CLK>;
2773			clock-names = "iface",
2774				      "bus",
2775				      "core";
2776
2777			power-domains = <&mmcc MDSS_GDSC>;
2778			iommus = <&mmss_smmu 0>;
2779
2780			#address-cells = <1>;
2781			#size-cells = <1>;
2782			ranges;
2783
2784			status = "disabled";
2785
2786			mdss_mdp: display-controller@c901000 {
2787				compatible = "qcom,msm8998-dpu";
2788				reg = <0x0c901000 0x8f000>,
2789				      <0x0c9a8e00 0xf0>,
2790				      <0x0c9b0000 0x2008>,
2791				      <0x0c9b8000 0x1040>;
2792				reg-names = "mdp",
2793					    "regdma",
2794					    "vbif",
2795					    "vbif_nrt";
2796
2797				interrupt-parent = <&mdss>;
2798				interrupts = <0>;
2799
2800				clocks = <&mmcc MDSS_AHB_CLK>,
2801					 <&mmcc MDSS_AXI_CLK>,
2802					 <&mmcc MNOC_AHB_CLK>,
2803					 <&mmcc MDSS_MDP_CLK>,
2804					 <&mmcc MDSS_VSYNC_CLK>;
2805				clock-names = "iface",
2806					      "bus",
2807					      "mnoc",
2808					      "core",
2809					      "vsync";
2810
2811				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
2812				assigned-clock-rates = <19200000>;
2813
2814				operating-points-v2 = <&mdp_opp_table>;
2815				power-domains = <&rpmpd MSM8998_VDDMX>;
2816
2817				mdp_opp_table: opp-table {
2818					compatible = "operating-points-v2";
2819
2820					opp-171430000 {
2821						opp-hz = /bits/ 64 <171430000>;
2822						required-opps = <&rpmpd_opp_low_svs>;
2823					};
2824
2825					opp-275000000 {
2826						opp-hz = /bits/ 64 <275000000>;
2827						required-opps = <&rpmpd_opp_svs>;
2828					};
2829
2830					opp-330000000 {
2831						opp-hz = /bits/ 64 <330000000>;
2832						required-opps = <&rpmpd_opp_nom>;
2833					};
2834
2835					opp-412500000 {
2836						opp-hz = /bits/ 64 <412500000>;
2837						required-opps = <&rpmpd_opp_turbo>;
2838					};
2839				};
2840
2841				ports {
2842					#address-cells = <1>;
2843					#size-cells = <0>;
2844
2845					port@0 {
2846						reg = <0>;
2847
2848						dpu_intf1_out: endpoint {
2849							remote-endpoint = <&mdss_dsi0_in>;
2850						};
2851					};
2852
2853					port@1 {
2854						reg = <1>;
2855
2856						dpu_intf2_out: endpoint {
2857							remote-endpoint = <&mdss_dsi1_in>;
2858						};
2859					};
2860				};
2861			};
2862
2863			mdss_dsi0: dsi@c994000 {
2864				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2865				reg = <0x0c994000 0x400>;
2866				reg-names = "dsi_ctrl";
2867
2868				interrupt-parent = <&mdss>;
2869				interrupts = <4>;
2870
2871				clocks = <&mmcc MDSS_BYTE0_CLK>,
2872					 <&mmcc MDSS_BYTE0_INTF_CLK>,
2873					 <&mmcc MDSS_PCLK0_CLK>,
2874					 <&mmcc MDSS_ESC0_CLK>,
2875					 <&mmcc MDSS_AHB_CLK>,
2876					 <&mmcc MDSS_AXI_CLK>;
2877				clock-names = "byte",
2878					      "byte_intf",
2879					      "pixel",
2880					      "core",
2881					      "iface",
2882					      "bus";
2883				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
2884						  <&mmcc PCLK0_CLK_SRC>;
2885				assigned-clock-parents = <&mdss_dsi0_phy 0>,
2886							 <&mdss_dsi0_phy 1>;
2887
2888				operating-points-v2 = <&dsi_opp_table>;
2889				power-domains = <&rpmpd MSM8998_VDDCX>;
2890
2891				phys = <&mdss_dsi0_phy>;
2892				phy-names = "dsi";
2893
2894				#address-cells = <1>;
2895				#size-cells = <0>;
2896
2897				status = "disabled";
2898
2899				ports {
2900					#address-cells = <1>;
2901					#size-cells = <0>;
2902
2903					port@0 {
2904						reg = <0>;
2905
2906						mdss_dsi0_in: endpoint {
2907							remote-endpoint = <&dpu_intf1_out>;
2908						};
2909					};
2910
2911					port@1 {
2912						reg = <1>;
2913
2914						mdss_dsi0_out: endpoint {
2915						};
2916					};
2917				};
2918			};
2919
2920			mdss_dsi0_phy: phy@c994400 {
2921				compatible = "qcom,dsi-phy-10nm-8998";
2922				reg = <0x0c994400 0x200>,
2923				      <0x0c994600 0x280>,
2924				      <0x0c994a00 0x1e0>;
2925				reg-names = "dsi_phy",
2926					    "dsi_phy_lane",
2927					    "dsi_pll";
2928
2929				clocks = <&mmcc MDSS_AHB_CLK>,
2930					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2931				clock-names = "iface", "ref";
2932
2933				#clock-cells = <1>;
2934				#phy-cells = <0>;
2935
2936				status = "disabled";
2937			};
2938
2939			mdss_dsi1: dsi@c996000 {
2940				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2941				reg = <0x0c996000 0x400>;
2942				reg-names = "dsi_ctrl";
2943
2944				interrupt-parent = <&mdss>;
2945				interrupts = <5>;
2946
2947				clocks = <&mmcc MDSS_BYTE1_CLK>,
2948					 <&mmcc MDSS_BYTE1_INTF_CLK>,
2949					 <&mmcc MDSS_PCLK1_CLK>,
2950					 <&mmcc MDSS_ESC1_CLK>,
2951					 <&mmcc MDSS_AHB_CLK>,
2952					 <&mmcc MDSS_AXI_CLK>;
2953				clock-names = "byte",
2954					      "byte_intf",
2955					      "pixel",
2956					      "core",
2957					      "iface",
2958					      "bus";
2959				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
2960						  <&mmcc PCLK1_CLK_SRC>;
2961				assigned-clock-parents = <&mdss_dsi1_phy 0>,
2962							 <&mdss_dsi1_phy 1>;
2963
2964				operating-points-v2 = <&dsi_opp_table>;
2965				power-domains = <&rpmpd MSM8998_VDDCX>;
2966
2967				phys = <&mdss_dsi1_phy>;
2968				phy-names = "dsi";
2969
2970				#address-cells = <1>;
2971				#size-cells = <0>;
2972
2973				status = "disabled";
2974
2975				ports {
2976					#address-cells = <1>;
2977					#size-cells = <0>;
2978
2979					port@0 {
2980						reg = <0>;
2981
2982						mdss_dsi1_in: endpoint {
2983							remote-endpoint = <&dpu_intf2_out>;
2984						};
2985					};
2986
2987					port@1 {
2988						reg = <1>;
2989
2990						mdss_dsi1_out: endpoint {
2991						};
2992					};
2993				};
2994			};
2995
2996			mdss_dsi1_phy: phy@c996400 {
2997				compatible = "qcom,dsi-phy-10nm-8998";
2998				reg = <0x0c996400 0x200>,
2999				      <0x0c996600 0x280>,
3000				      <0x0c996a00 0x10e>;
3001				reg-names = "dsi_phy",
3002					    "dsi_phy_lane",
3003					    "dsi_pll";
3004
3005				clocks = <&mmcc MDSS_AHB_CLK>,
3006					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
3007				clock-names = "iface",
3008					      "ref";
3009
3010				#clock-cells = <1>;
3011				#phy-cells = <0>;
3012
3013				status = "disabled";
3014			};
3015		};
3016
3017		mmss_smmu: iommu@cd00000 {
3018			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
3019			reg = <0x0cd00000 0x40000>;
3020			#iommu-cells = <1>;
3021
3022			clocks = <&mmcc MNOC_AHB_CLK>,
3023				 <&mmcc BIMC_SMMU_AHB_CLK>,
3024				 <&mmcc BIMC_SMMU_AXI_CLK>;
3025			clock-names = "iface-mm",
3026				      "iface-smmu",
3027				      "bus-smmu";
3028
3029			#global-interrupts = <0>;
3030			interrupts =
3031				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
3032				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
3033				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
3034				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
3035				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
3036				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
3037				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
3038				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
3039				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
3040				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
3041				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
3042				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
3043				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
3044				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
3045				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
3046				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
3047				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
3048				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
3049				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
3050				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
3051
3052			power-domains = <&mmcc BIMC_SMMU_GDSC>;
3053		};
3054
3055		remoteproc_adsp: remoteproc@17300000 {
3056			compatible = "qcom,msm8998-adsp-pas";
3057			reg = <0x17300000 0x4040>;
3058
3059			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
3060					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3061					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3062					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3063					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3064			interrupt-names = "wdog", "fatal", "ready",
3065					  "handover", "stop-ack";
3066
3067			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
3068			clock-names = "xo";
3069
3070			memory-region = <&adsp_mem>;
3071
3072			qcom,smem-states = <&adsp_smp2p_out 0>;
3073			qcom,smem-state-names = "stop";
3074
3075			power-domains = <&rpmpd MSM8998_VDDCX>;
3076			power-domain-names = "cx";
3077
3078			status = "disabled";
3079
3080			glink-edge {
3081				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
3082				label = "lpass";
3083				qcom,remote-pid = <2>;
3084				mboxes = <&apcs_glb 9>;
3085			};
3086		};
3087
3088		apcs_glb: mailbox@17911000 {
3089			compatible = "qcom,msm8998-apcs-hmss-global",
3090				     "qcom,msm8994-apcs-kpss-global";
3091			reg = <0x17911000 0x1000>;
3092
3093			#mbox-cells = <1>;
3094		};
3095
3096		timer@17920000 {
3097			#address-cells = <1>;
3098			#size-cells = <1>;
3099			ranges;
3100			compatible = "arm,armv7-timer-mem";
3101			reg = <0x17920000 0x1000>;
3102
3103			frame@17921000 {
3104				frame-number = <0>;
3105				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3106					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
3107				reg = <0x17921000 0x1000>,
3108				      <0x17922000 0x1000>;
3109			};
3110
3111			frame@17923000 {
3112				frame-number = <1>;
3113				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3114				reg = <0x17923000 0x1000>;
3115				status = "disabled";
3116			};
3117
3118			frame@17924000 {
3119				frame-number = <2>;
3120				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3121				reg = <0x17924000 0x1000>;
3122				status = "disabled";
3123			};
3124
3125			frame@17925000 {
3126				frame-number = <3>;
3127				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3128				reg = <0x17925000 0x1000>;
3129				status = "disabled";
3130			};
3131
3132			frame@17926000 {
3133				frame-number = <4>;
3134				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3135				reg = <0x17926000 0x1000>;
3136				status = "disabled";
3137			};
3138
3139			frame@17927000 {
3140				frame-number = <5>;
3141				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3142				reg = <0x17927000 0x1000>;
3143				status = "disabled";
3144			};
3145
3146			frame@17928000 {
3147				frame-number = <6>;
3148				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3149				reg = <0x17928000 0x1000>;
3150				status = "disabled";
3151			};
3152		};
3153
3154		intc: interrupt-controller@17a00000 {
3155			compatible = "arm,gic-v3";
3156			reg = <0x17a00000 0x10000>,       /* GICD */
3157			      <0x17b00000 0x100000>;      /* GICR * 8 */
3158			#interrupt-cells = <3>;
3159			#address-cells = <1>;
3160			#size-cells = <1>;
3161			ranges;
3162			interrupt-controller;
3163			#redistributor-regions = <1>;
3164			redistributor-stride = <0x0 0x20000>;
3165			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3166		};
3167
3168		wifi: wifi@18800000 {
3169			compatible = "qcom,wcn3990-wifi";
3170			status = "disabled";
3171			reg = <0x18800000 0x800000>;
3172			reg-names = "membase";
3173			memory-region = <&wlan_msa_mem>;
3174			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
3175			clock-names = "cxo_ref_clk_pin";
3176			interrupts =
3177				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
3178				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3179				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3180				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3181				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3182				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3183				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3184				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3185				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3186				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3187				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3188				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3189			iommus = <&anoc2_smmu 0x1900>,
3190				 <&anoc2_smmu 0x1901>;
3191			qcom,snoc-host-cap-8bit-quirk;
3192		};
3193	};
3194};
3195