xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8996.dtsi (revision 16c8d76a) 
1// SPDX-License-Identifier: GPL-2.0-only
2/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
3 */
4
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/clock/qcom,gcc-msm8996.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/power/qcom-rpmpd.h>
10#include <dt-bindings/soc/qcom,apr.h>
11#include <dt-bindings/thermal/thermal.h>
12
13/ {
14	interrupt-parent = <&intc>;
15
16	#address-cells = <2>;
17	#size-cells = <2>;
18
19	chosen { };
20
21	clocks {
22		xo_board: xo-board {
23			compatible = "fixed-clock";
24			#clock-cells = <0>;
25			clock-frequency = <19200000>;
26			clock-output-names = "xo_board";
27		};
28
29		sleep_clk: sleep-clk {
30			compatible = "fixed-clock";
31			#clock-cells = <0>;
32			clock-frequency = <32764>;
33			clock-output-names = "sleep_clk";
34		};
35	};
36
37	cpus {
38		#address-cells = <2>;
39		#size-cells = <0>;
40
41		CPU0: cpu@0 {
42			device_type = "cpu";
43			compatible = "qcom,kryo";
44			reg = <0x0 0x0>;
45			enable-method = "psci";
46			cpu-idle-states = <&CPU_SLEEP_0>;
47			capacity-dmips-mhz = <1024>;
48			clocks = <&kryocc 0>;
49			operating-points-v2 = <&cluster0_opp>;
50			#cooling-cells = <2>;
51			next-level-cache = <&L2_0>;
52			L2_0: l2-cache {
53			      compatible = "cache";
54			      cache-level = <2>;
55			};
56		};
57
58		CPU1: cpu@1 {
59			device_type = "cpu";
60			compatible = "qcom,kryo";
61			reg = <0x0 0x1>;
62			enable-method = "psci";
63			cpu-idle-states = <&CPU_SLEEP_0>;
64			capacity-dmips-mhz = <1024>;
65			clocks = <&kryocc 0>;
66			operating-points-v2 = <&cluster0_opp>;
67			#cooling-cells = <2>;
68			next-level-cache = <&L2_0>;
69		};
70
71		CPU2: cpu@100 {
72			device_type = "cpu";
73			compatible = "qcom,kryo";
74			reg = <0x0 0x100>;
75			enable-method = "psci";
76			cpu-idle-states = <&CPU_SLEEP_0>;
77			capacity-dmips-mhz = <1024>;
78			clocks = <&kryocc 1>;
79			operating-points-v2 = <&cluster1_opp>;
80			#cooling-cells = <2>;
81			next-level-cache = <&L2_1>;
82			L2_1: l2-cache {
83			      compatible = "cache";
84			      cache-level = <2>;
85			};
86		};
87
88		CPU3: cpu@101 {
89			device_type = "cpu";
90			compatible = "qcom,kryo";
91			reg = <0x0 0x101>;
92			enable-method = "psci";
93			cpu-idle-states = <&CPU_SLEEP_0>;
94			capacity-dmips-mhz = <1024>;
95			clocks = <&kryocc 1>;
96			operating-points-v2 = <&cluster1_opp>;
97			#cooling-cells = <2>;
98			next-level-cache = <&L2_1>;
99		};
100
101		cpu-map {
102			cluster0 {
103				core0 {
104					cpu = <&CPU0>;
105				};
106
107				core1 {
108					cpu = <&CPU1>;
109				};
110			};
111
112			cluster1 {
113				core0 {
114					cpu = <&CPU2>;
115				};
116
117				core1 {
118					cpu = <&CPU3>;
119				};
120			};
121		};
122
123		idle-states {
124			entry-method = "psci";
125
126			CPU_SLEEP_0: cpu-sleep-0 {
127				compatible = "arm,idle-state";
128				idle-state-name = "standalone-power-collapse";
129				arm,psci-suspend-param = <0x00000004>;
130				entry-latency-us = <130>;
131				exit-latency-us = <80>;
132				min-residency-us = <300>;
133			};
134		};
135	};
136
137	cluster0_opp: opp-table-cluster0 {
138		compatible = "operating-points-v2-kryo-cpu";
139		nvmem-cells = <&speedbin_efuse>;
140		opp-shared;
141
142		/* Nominal fmax for now */
143		opp-307200000 {
144			opp-hz = /bits/ 64 <307200000>;
145			opp-supported-hw = <0x77>;
146			clock-latency-ns = <200000>;
147		};
148		opp-422400000 {
149			opp-hz = /bits/ 64 <422400000>;
150			opp-supported-hw = <0x77>;
151			clock-latency-ns = <200000>;
152		};
153		opp-480000000 {
154			opp-hz = /bits/ 64 <480000000>;
155			opp-supported-hw = <0x77>;
156			clock-latency-ns = <200000>;
157		};
158		opp-556800000 {
159			opp-hz = /bits/ 64 <556800000>;
160			opp-supported-hw = <0x77>;
161			clock-latency-ns = <200000>;
162		};
163		opp-652800000 {
164			opp-hz = /bits/ 64 <652800000>;
165			opp-supported-hw = <0x77>;
166			clock-latency-ns = <200000>;
167		};
168		opp-729600000 {
169			opp-hz = /bits/ 64 <729600000>;
170			opp-supported-hw = <0x77>;
171			clock-latency-ns = <200000>;
172		};
173		opp-844800000 {
174			opp-hz = /bits/ 64 <844800000>;
175			opp-supported-hw = <0x77>;
176			clock-latency-ns = <200000>;
177		};
178		opp-960000000 {
179			opp-hz = /bits/ 64 <960000000>;
180			opp-supported-hw = <0x77>;
181			clock-latency-ns = <200000>;
182		};
183		opp-1036800000 {
184			opp-hz = /bits/ 64 <1036800000>;
185			opp-supported-hw = <0x77>;
186			clock-latency-ns = <200000>;
187		};
188		opp-1113600000 {
189			opp-hz = /bits/ 64 <1113600000>;
190			opp-supported-hw = <0x77>;
191			clock-latency-ns = <200000>;
192		};
193		opp-1190400000 {
194			opp-hz = /bits/ 64 <1190400000>;
195			opp-supported-hw = <0x77>;
196			clock-latency-ns = <200000>;
197		};
198		opp-1228800000 {
199			opp-hz = /bits/ 64 <1228800000>;
200			opp-supported-hw = <0x77>;
201			clock-latency-ns = <200000>;
202		};
203		opp-1324800000 {
204			opp-hz = /bits/ 64 <1324800000>;
205			opp-supported-hw = <0x77>;
206			clock-latency-ns = <200000>;
207		};
208		opp-1401600000 {
209			opp-hz = /bits/ 64 <1401600000>;
210			opp-supported-hw = <0x77>;
211			clock-latency-ns = <200000>;
212		};
213		opp-1478400000 {
214			opp-hz = /bits/ 64 <1478400000>;
215			opp-supported-hw = <0x77>;
216			clock-latency-ns = <200000>;
217		};
218		opp-1593600000 {
219			opp-hz = /bits/ 64 <1593600000>;
220			opp-supported-hw = <0x77>;
221			clock-latency-ns = <200000>;
222		};
223	};
224
225	cluster1_opp: opp-table-cluster1 {
226		compatible = "operating-points-v2-kryo-cpu";
227		nvmem-cells = <&speedbin_efuse>;
228		opp-shared;
229
230		/* Nominal fmax for now */
231		opp-307200000 {
232			opp-hz = /bits/ 64 <307200000>;
233			opp-supported-hw = <0x77>;
234			clock-latency-ns = <200000>;
235		};
236		opp-403200000 {
237			opp-hz = /bits/ 64 <403200000>;
238			opp-supported-hw = <0x77>;
239			clock-latency-ns = <200000>;
240		};
241		opp-480000000 {
242			opp-hz = /bits/ 64 <480000000>;
243			opp-supported-hw = <0x77>;
244			clock-latency-ns = <200000>;
245		};
246		opp-556800000 {
247			opp-hz = /bits/ 64 <556800000>;
248			opp-supported-hw = <0x77>;
249			clock-latency-ns = <200000>;
250		};
251		opp-652800000 {
252			opp-hz = /bits/ 64 <652800000>;
253			opp-supported-hw = <0x77>;
254			clock-latency-ns = <200000>;
255		};
256		opp-729600000 {
257			opp-hz = /bits/ 64 <729600000>;
258			opp-supported-hw = <0x77>;
259			clock-latency-ns = <200000>;
260		};
261		opp-806400000 {
262			opp-hz = /bits/ 64 <806400000>;
263			opp-supported-hw = <0x77>;
264			clock-latency-ns = <200000>;
265		};
266		opp-883200000 {
267			opp-hz = /bits/ 64 <883200000>;
268			opp-supported-hw = <0x77>;
269			clock-latency-ns = <200000>;
270		};
271		opp-940800000 {
272			opp-hz = /bits/ 64 <940800000>;
273			opp-supported-hw = <0x77>;
274			clock-latency-ns = <200000>;
275		};
276		opp-1036800000 {
277			opp-hz = /bits/ 64 <1036800000>;
278			opp-supported-hw = <0x77>;
279			clock-latency-ns = <200000>;
280		};
281		opp-1113600000 {
282			opp-hz = /bits/ 64 <1113600000>;
283			opp-supported-hw = <0x77>;
284			clock-latency-ns = <200000>;
285		};
286		opp-1190400000 {
287			opp-hz = /bits/ 64 <1190400000>;
288			opp-supported-hw = <0x77>;
289			clock-latency-ns = <200000>;
290		};
291		opp-1248000000 {
292			opp-hz = /bits/ 64 <1248000000>;
293			opp-supported-hw = <0x77>;
294			clock-latency-ns = <200000>;
295		};
296		opp-1324800000 {
297			opp-hz = /bits/ 64 <1324800000>;
298			opp-supported-hw = <0x77>;
299			clock-latency-ns = <200000>;
300		};
301		opp-1401600000 {
302			opp-hz = /bits/ 64 <1401600000>;
303			opp-supported-hw = <0x77>;
304			clock-latency-ns = <200000>;
305		};
306		opp-1478400000 {
307			opp-hz = /bits/ 64 <1478400000>;
308			opp-supported-hw = <0x77>;
309			clock-latency-ns = <200000>;
310		};
311		opp-1555200000 {
312			opp-hz = /bits/ 64 <1555200000>;
313			opp-supported-hw = <0x77>;
314			clock-latency-ns = <200000>;
315		};
316		opp-1632000000 {
317			opp-hz = /bits/ 64 <1632000000>;
318			opp-supported-hw = <0x77>;
319			clock-latency-ns = <200000>;
320		};
321		opp-1708800000 {
322			opp-hz = /bits/ 64 <1708800000>;
323			opp-supported-hw = <0x77>;
324			clock-latency-ns = <200000>;
325		};
326		opp-1785600000 {
327			opp-hz = /bits/ 64 <1785600000>;
328			opp-supported-hw = <0x77>;
329			clock-latency-ns = <200000>;
330		};
331		opp-1824000000 {
332			opp-hz = /bits/ 64 <1824000000>;
333			opp-supported-hw = <0x77>;
334			clock-latency-ns = <200000>;
335		};
336		opp-1920000000 {
337			opp-hz = /bits/ 64 <1920000000>;
338			opp-supported-hw = <0x77>;
339			clock-latency-ns = <200000>;
340		};
341		opp-1996800000 {
342			opp-hz = /bits/ 64 <1996800000>;
343			opp-supported-hw = <0x77>;
344			clock-latency-ns = <200000>;
345		};
346		opp-2073600000 {
347			opp-hz = /bits/ 64 <2073600000>;
348			opp-supported-hw = <0x77>;
349			clock-latency-ns = <200000>;
350		};
351		opp-2150400000 {
352			opp-hz = /bits/ 64 <2150400000>;
353			opp-supported-hw = <0x77>;
354			clock-latency-ns = <200000>;
355		};
356	};
357
358	firmware {
359		scm {
360			compatible = "qcom,scm-msm8996";
361			qcom,dload-mode = <&tcsr 0x13000>;
362		};
363	};
364
365	tcsr_mutex: hwlock {
366		compatible = "qcom,tcsr-mutex";
367		syscon = <&tcsr_mutex_regs 0 0x1000>;
368		#hwlock-cells = <1>;
369	};
370
371	memory@80000000 {
372		device_type = "memory";
373		/* We expect the bootloader to fill in the reg */
374		reg = <0x0 0x80000000 0x0 0x0>;
375	};
376
377	psci {
378		compatible = "arm,psci-1.0";
379		method = "smc";
380	};
381
382	reserved-memory {
383		#address-cells = <2>;
384		#size-cells = <2>;
385		ranges;
386
387		mba_region: mba@91500000 {
388			reg = <0x0 0x91500000 0x0 0x200000>;
389			no-map;
390		};
391
392		slpi_region: slpi@90b00000 {
393			reg = <0x0 0x90b00000 0x0 0xa00000>;
394			no-map;
395		};
396
397		venus_region: venus@90400000 {
398			reg = <0x0 0x90400000 0x0 0x700000>;
399			no-map;
400		};
401
402		adsp_region: adsp@8ea00000 {
403			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
404			no-map;
405		};
406
407		mpss_region: mpss@88800000 {
408			reg = <0x0 0x88800000 0x0 0x6200000>;
409			no-map;
410		};
411
412		smem_mem: smem-mem@86000000 {
413			reg = <0x0 0x86000000 0x0 0x200000>;
414			no-map;
415		};
416
417		memory@85800000 {
418			reg = <0x0 0x85800000 0x0 0x800000>;
419			no-map;
420		};
421
422		memory@86200000 {
423			reg = <0x0 0x86200000 0x0 0x2600000>;
424			no-map;
425		};
426
427		rmtfs@86700000 {
428			compatible = "qcom,rmtfs-mem";
429
430			size = <0x0 0x200000>;
431			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
432			no-map;
433
434			qcom,client-id = <1>;
435			qcom,vmid = <15>;
436		};
437
438		zap_shader_region: gpu@8f200000 {
439			compatible = "shared-dma-pool";
440			reg = <0x0 0x90b00000 0x0 0xa00000>;
441			no-map;
442		};
443	};
444
445	rpm-glink {
446		compatible = "qcom,glink-rpm";
447
448		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
449
450		qcom,rpm-msg-ram = <&rpm_msg_ram>;
451
452		mboxes = <&apcs_glb 0>;
453
454		rpm_requests: rpm-requests {
455			compatible = "qcom,rpm-msm8996";
456			qcom,glink-channels = "rpm_requests";
457
458			rpmcc: qcom,rpmcc {
459				compatible = "qcom,rpmcc-msm8996";
460				#clock-cells = <1>;
461			};
462
463			rpmpd: power-controller {
464				compatible = "qcom,msm8996-rpmpd";
465				#power-domain-cells = <1>;
466				operating-points-v2 = <&rpmpd_opp_table>;
467
468				rpmpd_opp_table: opp-table {
469					compatible = "operating-points-v2";
470
471					rpmpd_opp1: opp1 {
472						opp-level = <1>;
473					};
474
475					rpmpd_opp2: opp2 {
476						opp-level = <2>;
477					};
478
479					rpmpd_opp3: opp3 {
480						opp-level = <3>;
481					};
482
483					rpmpd_opp4: opp4 {
484						opp-level = <4>;
485					};
486
487					rpmpd_opp5: opp5 {
488						opp-level = <5>;
489					};
490
491					rpmpd_opp6: opp6 {
492						opp-level = <6>;
493					};
494				};
495			};
496		};
497	};
498
499	smem {
500		compatible = "qcom,smem";
501		memory-region = <&smem_mem>;
502		hwlocks = <&tcsr_mutex 3>;
503	};
504
505	smp2p-adsp {
506		compatible = "qcom,smp2p";
507		qcom,smem = <443>, <429>;
508
509		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
510
511		mboxes = <&apcs_glb 10>;
512
513		qcom,local-pid = <0>;
514		qcom,remote-pid = <2>;
515
516		smp2p_adsp_out: master-kernel {
517			qcom,entry-name = "master-kernel";
518			#qcom,smem-state-cells = <1>;
519		};
520
521		smp2p_adsp_in: slave-kernel {
522			qcom,entry-name = "slave-kernel";
523
524			interrupt-controller;
525			#interrupt-cells = <2>;
526		};
527	};
528
529	smp2p-modem {
530		compatible = "qcom,smp2p";
531		qcom,smem = <435>, <428>;
532
533		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
534
535		mboxes = <&apcs_glb 14>;
536
537		qcom,local-pid = <0>;
538		qcom,remote-pid = <1>;
539
540		modem_smp2p_out: master-kernel {
541			qcom,entry-name = "master-kernel";
542			#qcom,smem-state-cells = <1>;
543		};
544
545		modem_smp2p_in: slave-kernel {
546			qcom,entry-name = "slave-kernel";
547
548			interrupt-controller;
549			#interrupt-cells = <2>;
550		};
551	};
552
553	smp2p-slpi {
554		compatible = "qcom,smp2p";
555		qcom,smem = <481>, <430>;
556
557		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
558
559		mboxes = <&apcs_glb 26>;
560
561		qcom,local-pid = <0>;
562		qcom,remote-pid = <3>;
563
564		smp2p_slpi_in: slave-kernel {
565			qcom,entry-name = "slave-kernel";
566			interrupt-controller;
567			#interrupt-cells = <2>;
568		};
569
570		smp2p_slpi_out: master-kernel {
571			qcom,entry-name = "master-kernel";
572			#qcom,smem-state-cells = <1>;
573		};
574	};
575
576	soc: soc {
577		#address-cells = <1>;
578		#size-cells = <1>;
579		ranges = <0 0 0 0xffffffff>;
580		compatible = "simple-bus";
581
582		pcie_phy: phy@34000 {
583			compatible = "qcom,msm8996-qmp-pcie-phy";
584			reg = <0x00034000 0x488>;
585			#address-cells = <1>;
586			#size-cells = <1>;
587			ranges;
588
589			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
590				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
591				<&gcc GCC_PCIE_CLKREF_CLK>;
592			clock-names = "aux", "cfg_ahb", "ref";
593
594			resets = <&gcc GCC_PCIE_PHY_BCR>,
595				<&gcc GCC_PCIE_PHY_COM_BCR>,
596				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
597			reset-names = "phy", "common", "cfg";
598			status = "disabled";
599
600			pciephy_0: phy@35000 {
601				reg = <0x00035000 0x130>,
602				      <0x00035200 0x200>,
603				      <0x00035400 0x1dc>;
604				#phy-cells = <0>;
605
606				#clock-cells = <1>;
607				clock-output-names = "pcie_0_pipe_clk_src";
608				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
609				clock-names = "pipe0";
610				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
611				reset-names = "lane0";
612			};
613
614			pciephy_1: phy@36000 {
615				reg = <0x00036000 0x130>,
616				      <0x00036200 0x200>,
617				      <0x00036400 0x1dc>;
618				#phy-cells = <0>;
619
620				clock-output-names = "pcie_1_pipe_clk_src";
621				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
622				clock-names = "pipe1";
623				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
624				reset-names = "lane1";
625			};
626
627			pciephy_2: phy@37000 {
628				reg = <0x00037000 0x130>,
629				      <0x00037200 0x200>,
630				      <0x00037400 0x1dc>;
631				#phy-cells = <0>;
632
633				clock-output-names = "pcie_2_pipe_clk_src";
634				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
635				clock-names = "pipe2";
636				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
637				reset-names = "lane2";
638			};
639		};
640
641		rpm_msg_ram: sram@68000 {
642			compatible = "qcom,rpm-msg-ram";
643			reg = <0x00068000 0x6000>;
644		};
645
646		qfprom@74000 {
647			compatible = "qcom,qfprom";
648			reg = <0x00074000 0x8ff>;
649			#address-cells = <1>;
650			#size-cells = <1>;
651
652			qusb2p_hstx_trim: hstx_trim@24e {
653				reg = <0x24e 0x2>;
654				bits = <5 4>;
655			};
656
657			qusb2s_hstx_trim: hstx_trim@24f {
658				reg = <0x24f 0x1>;
659				bits = <1 4>;
660			};
661
662			speedbin_efuse: speedbin@133 {
663				reg = <0x133 0x1>;
664				bits = <5 3>;
665			};
666		};
667
668		rng: rng@83000 {
669			compatible = "qcom,prng-ee";
670			reg = <0x00083000 0x1000>;
671			clocks = <&gcc GCC_PRNG_AHB_CLK>;
672			clock-names = "core";
673		};
674
675		gcc: clock-controller@300000 {
676			compatible = "qcom,gcc-msm8996";
677			#clock-cells = <1>;
678			#reset-cells = <1>;
679			#power-domain-cells = <1>;
680			reg = <0x00300000 0x90000>;
681
682			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
683				 <&rpmcc RPM_SMD_LN_BB_CLK>,
684				 <&sleep_clk>;
685			clock-names = "cxo", "cxo2", "sleep_clk";
686		};
687
688		tsens0: thermal-sensor@4a9000 {
689			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
690			reg = <0x004a9000 0x1000>, /* TM */
691			      <0x004a8000 0x1000>; /* SROT */
692			#qcom,sensors = <13>;
693			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
694				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
695			interrupt-names = "uplow", "critical";
696			#thermal-sensor-cells = <1>;
697		};
698
699		tsens1: thermal-sensor@4ad000 {
700			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
701			reg = <0x004ad000 0x1000>, /* TM */
702			      <0x004ac000 0x1000>; /* SROT */
703			#qcom,sensors = <8>;
704			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
705				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
706			interrupt-names = "uplow", "critical";
707			#thermal-sensor-cells = <1>;
708		};
709
710		cryptobam: dma@644000 {
711			compatible = "qcom,bam-v1.7.0";
712			reg = <0x00644000 0x24000>;
713			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
714			clocks = <&gcc GCC_CE1_CLK>;
715			clock-names = "bam_clk";
716			#dma-cells = <1>;
717			qcom,ee = <0>;
718			qcom,controlled-remotely;
719		};
720
721		crypto: crypto@67a000 {
722			compatible = "qcom,crypto-v5.4";
723			reg = <0x0067a000 0x6000>;
724			clocks = <&gcc GCC_CE1_AHB_CLK>,
725				 <&gcc GCC_CE1_AXI_CLK>,
726				 <&gcc GCC_CE1_CLK>;
727			clock-names = "iface", "bus", "core";
728			dmas = <&cryptobam 6>, <&cryptobam 7>;
729			dma-names = "rx", "tx";
730		};
731
732		tcsr_mutex_regs: syscon@740000 {
733			compatible = "syscon";
734			reg = <0x00740000 0x40000>;
735		};
736
737		tcsr: syscon@7a0000 {
738			compatible = "qcom,tcsr-msm8996", "syscon";
739			reg = <0x007a0000 0x18000>;
740		};
741
742		mmcc: clock-controller@8c0000 {
743			compatible = "qcom,mmcc-msm8996";
744			#clock-cells = <1>;
745			#reset-cells = <1>;
746			#power-domain-cells = <1>;
747			reg = <0x008c0000 0x40000>;
748			assigned-clocks = <&mmcc MMPLL9_PLL>,
749					  <&mmcc MMPLL1_PLL>,
750					  <&mmcc MMPLL3_PLL>,
751					  <&mmcc MMPLL4_PLL>,
752					  <&mmcc MMPLL5_PLL>;
753			assigned-clock-rates = <624000000>,
754					       <810000000>,
755					       <980000000>,
756					       <960000000>,
757					       <825000000>;
758		};
759
760		mdss: mdss@900000 {
761			compatible = "qcom,mdss";
762
763			reg = <0x00900000 0x1000>,
764			      <0x009b0000 0x1040>,
765			      <0x009b8000 0x1040>;
766			reg-names = "mdss_phys",
767				    "vbif_phys",
768				    "vbif_nrt_phys";
769
770			power-domains = <&mmcc MDSS_GDSC>;
771			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
772
773			interrupt-controller;
774			#interrupt-cells = <1>;
775
776			clocks = <&mmcc MDSS_AHB_CLK>;
777			clock-names = "iface";
778
779			#address-cells = <1>;
780			#size-cells = <1>;
781			ranges;
782
783			status = "disabled";
784
785			mdp: mdp@901000 {
786				compatible = "qcom,mdp5";
787				reg = <0x00901000 0x90000>;
788				reg-names = "mdp_phys";
789
790				interrupt-parent = <&mdss>;
791				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
792
793				clocks = <&mmcc MDSS_AHB_CLK>,
794					 <&mmcc MDSS_AXI_CLK>,
795					 <&mmcc MDSS_MDP_CLK>,
796					 <&mmcc SMMU_MDP_AXI_CLK>,
797					 <&mmcc MDSS_VSYNC_CLK>;
798				clock-names = "iface",
799					      "bus",
800					      "core",
801					      "iommu",
802					      "vsync";
803
804				iommus = <&mdp_smmu 0>;
805
806				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
807					 <&mmcc MDSS_VSYNC_CLK>;
808				assigned-clock-rates = <300000000>,
809					 <19200000>;
810
811				ports {
812					#address-cells = <1>;
813					#size-cells = <0>;
814
815					port@0 {
816						reg = <0>;
817						mdp5_intf3_out: endpoint {
818							remote-endpoint = <&hdmi_in>;
819						};
820					};
821
822					port@1 {
823						reg = <1>;
824						mdp5_intf1_out: endpoint {
825							remote-endpoint = <&dsi0_in>;
826						};
827					};
828				};
829			};
830
831			dsi0: dsi@994000 {
832				compatible = "qcom,mdss-dsi-ctrl";
833				reg = <0x00994000 0x400>;
834				reg-names = "dsi_ctrl";
835
836				interrupt-parent = <&mdss>;
837				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
838
839				clocks = <&mmcc MDSS_MDP_CLK>,
840					 <&mmcc MDSS_BYTE0_CLK>,
841					 <&mmcc MDSS_AHB_CLK>,
842					 <&mmcc MDSS_AXI_CLK>,
843					 <&mmcc MMSS_MISC_AHB_CLK>,
844					 <&mmcc MDSS_PCLK0_CLK>,
845					 <&mmcc MDSS_ESC0_CLK>;
846				clock-names = "mdp_core",
847					      "byte",
848					      "iface",
849					      "bus",
850					      "core_mmss",
851					      "pixel",
852					      "core";
853
854				phys = <&dsi0_phy>;
855				phy-names = "dsi";
856				status = "disabled";
857
858				#address-cells = <1>;
859				#size-cells = <0>;
860
861				ports {
862					#address-cells = <1>;
863					#size-cells = <0>;
864
865					port@0 {
866						reg = <0>;
867						dsi0_in: endpoint {
868							remote-endpoint = <&mdp5_intf1_out>;
869						};
870					};
871
872					port@1 {
873						reg = <1>;
874						dsi0_out: endpoint {
875						};
876					};
877				};
878			};
879
880			dsi0_phy: dsi-phy@994400 {
881				compatible = "qcom,dsi-phy-14nm";
882				reg = <0x00994400 0x100>,
883				      <0x00994500 0x300>,
884				      <0x00994800 0x188>;
885				reg-names = "dsi_phy",
886					    "dsi_phy_lane",
887					    "dsi_pll";
888
889				#clock-cells = <1>;
890				#phy-cells = <0>;
891
892				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
893				clock-names = "iface", "ref";
894				status = "disabled";
895			};
896
897			hdmi: hdmi-tx@9a0000 {
898				compatible = "qcom,hdmi-tx-8996";
899				reg =	<0x009a0000 0x50c>,
900					<0x00070000 0x6158>,
901					<0x009e0000 0xfff>;
902				reg-names = "core_physical",
903					    "qfprom_physical",
904					    "hdcp_physical";
905
906				interrupt-parent = <&mdss>;
907				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
908
909				clocks = <&mmcc MDSS_MDP_CLK>,
910					 <&mmcc MDSS_AHB_CLK>,
911					 <&mmcc MDSS_HDMI_CLK>,
912					 <&mmcc MDSS_HDMI_AHB_CLK>,
913					 <&mmcc MDSS_EXTPCLK_CLK>;
914				clock-names =
915					"mdp_core",
916					"iface",
917					"core",
918					"alt_iface",
919					"extp";
920
921				phys = <&hdmi_phy>;
922				phy-names = "hdmi_phy";
923				#sound-dai-cells = <1>;
924
925				status = "disabled";
926
927				ports {
928					#address-cells = <1>;
929					#size-cells = <0>;
930
931					port@0 {
932						reg = <0>;
933						hdmi_in: endpoint {
934							remote-endpoint = <&mdp5_intf3_out>;
935						};
936					};
937				};
938			};
939
940			hdmi_phy: hdmi-phy@9a0600 {
941				#phy-cells = <0>;
942				compatible = "qcom,hdmi-phy-8996";
943				reg = <0x009a0600 0x1c4>,
944				      <0x009a0a00 0x124>,
945				      <0x009a0c00 0x124>,
946				      <0x009a0e00 0x124>,
947				      <0x009a1000 0x124>,
948				      <0x009a1200 0x0c8>;
949				reg-names = "hdmi_pll",
950					    "hdmi_tx_l0",
951					    "hdmi_tx_l1",
952					    "hdmi_tx_l2",
953					    "hdmi_tx_l3",
954					    "hdmi_phy";
955
956				clocks = <&mmcc MDSS_AHB_CLK>,
957					 <&gcc GCC_HDMI_CLKREF_CLK>;
958				clock-names = "iface",
959					      "ref";
960
961				status = "disabled";
962			};
963		};
964
965		gpu: gpu@b00000 {
966			compatible = "qcom,adreno-530.2", "qcom,adreno";
967
968			reg = <0x00b00000 0x3f000>;
969			reg-names = "kgsl_3d0_reg_memory";
970
971			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
972
973			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
974				<&mmcc GPU_AHB_CLK>,
975				<&mmcc GPU_GX_RBBMTIMER_CLK>,
976				<&gcc GCC_BIMC_GFX_CLK>,
977				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
978
979			clock-names = "core",
980				"iface",
981				"rbbmtimer",
982				"mem",
983				"mem_iface";
984
985			power-domains = <&mmcc GPU_GX_GDSC>;
986			iommus = <&adreno_smmu 0>;
987
988			nvmem-cells = <&speedbin_efuse>;
989			nvmem-cell-names = "speed_bin";
990
991			operating-points-v2 = <&gpu_opp_table>;
992
993			status = "disabled";
994
995			#cooling-cells = <2>;
996
997			gpu_opp_table: opp-table {
998				compatible  ="operating-points-v2";
999
1000				/*
1001				 * 624Mhz and 560Mhz are only available on speed
1002				 * bin (1 << 0). All the rest are available on
1003				 * all bins of the hardware
1004				 */
1005				opp-624000000 {
1006					opp-hz = /bits/ 64 <624000000>;
1007					opp-supported-hw = <0x01>;
1008				};
1009				opp-560000000 {
1010					opp-hz = /bits/ 64 <560000000>;
1011					opp-supported-hw = <0x01>;
1012				};
1013				opp-510000000 {
1014					opp-hz = /bits/ 64 <510000000>;
1015					opp-supported-hw = <0xFF>;
1016				};
1017				opp-401800000 {
1018					opp-hz = /bits/ 64 <401800000>;
1019					opp-supported-hw = <0xFF>;
1020				};
1021				opp-315000000 {
1022					opp-hz = /bits/ 64 <315000000>;
1023					opp-supported-hw = <0xFF>;
1024				};
1025				opp-214000000 {
1026					opp-hz = /bits/ 64 <214000000>;
1027					opp-supported-hw = <0xFF>;
1028				};
1029				opp-133000000 {
1030					opp-hz = /bits/ 64 <133000000>;
1031					opp-supported-hw = <0xFF>;
1032				};
1033			};
1034
1035			zap-shader {
1036				memory-region = <&zap_shader_region>;
1037			};
1038		};
1039
1040		tlmm: pinctrl@1010000 {
1041			compatible = "qcom,msm8996-pinctrl";
1042			reg = <0x01010000 0x300000>;
1043			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1044			gpio-controller;
1045			gpio-ranges = <&tlmm 0 0 150>;
1046			#gpio-cells = <2>;
1047			interrupt-controller;
1048			#interrupt-cells = <2>;
1049
1050			blsp1_spi1_default: blsp1-spi1-default {
1051				spi {
1052					pins = "gpio0", "gpio1", "gpio3";
1053					function = "blsp_spi1";
1054					drive-strength = <12>;
1055					bias-disable;
1056				};
1057
1058				cs {
1059					pins = "gpio2";
1060					function = "gpio";
1061					drive-strength = <16>;
1062					bias-disable;
1063					output-high;
1064				};
1065			};
1066
1067			blsp1_spi1_sleep: blsp1-spi1-sleep {
1068				pins = "gpio0", "gpio1", "gpio2", "gpio3";
1069				function = "gpio";
1070				drive-strength = <2>;
1071				bias-pull-down;
1072			};
1073
1074			blsp2_uart2_2pins_default: blsp2-uart1-2pins {
1075				pins = "gpio4", "gpio5";
1076				function = "blsp_uart8";
1077				drive-strength = <16>;
1078				bias-disable;
1079			};
1080
1081			blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
1082				pins = "gpio4", "gpio5";
1083				function = "gpio";
1084				drive-strength = <2>;
1085				bias-disable;
1086			};
1087
1088			blsp2_i2c2_default: blsp2-i2c2 {
1089				pins = "gpio6", "gpio7";
1090				function = "blsp_i2c8";
1091				drive-strength = <16>;
1092				bias-disable;
1093			};
1094
1095			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
1096				pins = "gpio6", "gpio7";
1097				function = "gpio";
1098				drive-strength = <2>;
1099				bias-disable;
1100			};
1101
1102			cci0_default: cci0-default {
1103				pins = "gpio17", "gpio18";
1104				function = "cci_i2c";
1105				drive-strength = <16>;
1106				bias-disable;
1107			};
1108
1109			camera0_state_on:
1110			camera_rear_default: camera-rear-default {
1111				camera0_mclk: mclk0 {
1112					pins = "gpio13";
1113					function = "cam_mclk";
1114					drive-strength = <16>;
1115					bias-disable;
1116				};
1117
1118				camera0_rst: rst {
1119					pins = "gpio25";
1120					function = "gpio";
1121					drive-strength = <16>;
1122					bias-disable;
1123				};
1124
1125				camera0_pwdn: pwdn {
1126					pins = "gpio26";
1127					function = "gpio";
1128					drive-strength = <16>;
1129					bias-disable;
1130				};
1131			};
1132
1133			cci1_default: cci1-default {
1134				pins = "gpio19", "gpio20";
1135				function = "cci_i2c";
1136				drive-strength = <16>;
1137				bias-disable;
1138			};
1139
1140			camera1_state_on:
1141			camera_board_default: camera-board-default {
1142				mclk1 {
1143					pins = "gpio14";
1144					function = "cam_mclk";
1145					drive-strength = <16>;
1146					bias-disable;
1147				};
1148
1149				pwdn {
1150					pins = "gpio98";
1151					function = "gpio";
1152					drive-strength = <16>;
1153					bias-disable;
1154				};
1155
1156				rst {
1157					pins = "gpio104";
1158					function = "gpio";
1159					drive-strength = <16>;
1160					bias-disable;
1161				};
1162			};
1163
1164			camera2_state_on:
1165			camera_front_default: camera-front-default {
1166				camera2_mclk: mclk2 {
1167					pins = "gpio15";
1168					function = "cam_mclk";
1169					drive-strength = <16>;
1170					bias-disable;
1171				};
1172
1173				camera2_rst: rst {
1174					pins = "gpio23";
1175					function = "gpio";
1176					drive-strength = <16>;
1177					bias-disable;
1178				};
1179
1180				pwdn {
1181					pins = "gpio133";
1182					function = "gpio";
1183					drive-strength = <16>;
1184					bias-disable;
1185				};
1186			};
1187
1188			pcie0_state_on: pcie0-state-on {
1189				perst {
1190					pins = "gpio35";
1191					function = "gpio";
1192					drive-strength = <2>;
1193					bias-pull-down;
1194				};
1195
1196				clkreq {
1197					pins = "gpio36";
1198					function = "pci_e0";
1199					drive-strength = <2>;
1200					bias-pull-up;
1201				};
1202
1203				wake {
1204					pins = "gpio37";
1205					function = "gpio";
1206					drive-strength = <2>;
1207					bias-pull-up;
1208				};
1209			};
1210
1211			pcie0_state_off: pcie0-state-off {
1212				perst {
1213					pins = "gpio35";
1214					function = "gpio";
1215					drive-strength = <2>;
1216					bias-pull-down;
1217				};
1218
1219				clkreq {
1220					pins = "gpio36";
1221					function = "gpio";
1222					drive-strength = <2>;
1223					bias-disable;
1224				};
1225
1226				wake {
1227					pins = "gpio37";
1228					function = "gpio";
1229					drive-strength = <2>;
1230					bias-disable;
1231				};
1232			};
1233
1234			blsp1_uart2_default: blsp1-uart2-default {
1235				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1236				function = "blsp_uart2";
1237				drive-strength = <16>;
1238				bias-disable;
1239			};
1240
1241			blsp1_uart2_sleep: blsp1-uart2-sleep {
1242				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1243				function = "gpio";
1244				drive-strength = <2>;
1245				bias-disable;
1246			};
1247
1248			blsp1_i2c3_default: blsp1-i2c2-default {
1249				pins = "gpio47", "gpio48";
1250				function = "blsp_i2c3";
1251				drive-strength = <16>;
1252				bias-disable;
1253			};
1254
1255			blsp1_i2c3_sleep: blsp1-i2c2-sleep {
1256				pins = "gpio47", "gpio48";
1257				function = "gpio";
1258				drive-strength = <2>;
1259				bias-disable;
1260			};
1261
1262			blsp2_uart3_4pins_default: blsp2-uart2-4pins {
1263				pins = "gpio49", "gpio50", "gpio51", "gpio52";
1264				function = "blsp_uart9";
1265				drive-strength = <16>;
1266				bias-disable;
1267			};
1268
1269			blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
1270				pins = "gpio49", "gpio50", "gpio51", "gpio52";
1271				function = "blsp_uart9";
1272				drive-strength = <2>;
1273				bias-disable;
1274			};
1275
1276			blsp2_i2c3_default: blsp2-i2c3 {
1277				pins = "gpio51", "gpio52";
1278				function = "blsp_i2c9";
1279				drive-strength = <16>;
1280				bias-disable;
1281			};
1282
1283			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
1284				pins = "gpio51", "gpio52";
1285				function = "gpio";
1286				drive-strength = <2>;
1287				bias-disable;
1288			};
1289
1290			wcd_intr_default: wcd-intr-default{
1291				pins = "gpio54";
1292				function = "gpio";
1293				drive-strength = <2>;
1294				bias-pull-down;
1295				input-enable;
1296			};
1297
1298			blsp2_i2c1_default: blsp2-i2c1 {
1299				pins = "gpio55", "gpio56";
1300				function = "blsp_i2c7";
1301				drive-strength = <16>;
1302				bias-disable;
1303			};
1304
1305			blsp2_i2c1_sleep: blsp2-i2c0-sleep {
1306				pins = "gpio55", "gpio56";
1307				function = "gpio";
1308				drive-strength = <2>;
1309				bias-disable;
1310			};
1311
1312			blsp2_i2c5_default: blsp2-i2c5 {
1313				pins = "gpio60", "gpio61";
1314				function = "blsp_i2c11";
1315				drive-strength = <2>;
1316				bias-disable;
1317			};
1318
1319			/* Sleep state for BLSP2_I2C5 is missing.. */
1320
1321			cdc_reset_active: cdc-reset-active {
1322				pins = "gpio64";
1323				function = "gpio";
1324				drive-strength = <16>;
1325				bias-pull-down;
1326				output-high;
1327			};
1328
1329			cdc_reset_sleep: cdc-reset-sleep {
1330				pins = "gpio64";
1331				function = "gpio";
1332				drive-strength = <16>;
1333				bias-disable;
1334				output-low;
1335			};
1336
1337			blsp2_spi6_default: blsp2-spi5-default {
1338				spi {
1339					pins = "gpio85", "gpio86", "gpio88";
1340					function = "blsp_spi12";
1341					drive-strength = <12>;
1342					bias-disable;
1343				};
1344
1345				cs {
1346					pins = "gpio87";
1347					function = "gpio";
1348					drive-strength = <16>;
1349					bias-disable;
1350					output-high;
1351				};
1352			};
1353
1354			blsp2_spi6_sleep: blsp2-spi5-sleep {
1355				pins = "gpio85", "gpio86", "gpio87", "gpio88";
1356				function = "gpio";
1357				drive-strength = <2>;
1358				bias-pull-down;
1359			};
1360
1361			blsp2_i2c6_default: blsp2-i2c6 {
1362				pins = "gpio87", "gpio88";
1363				function = "blsp_i2c12";
1364				drive-strength = <16>;
1365				bias-disable;
1366			};
1367
1368			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
1369				pins = "gpio87", "gpio88";
1370				function = "gpio";
1371				drive-strength = <2>;
1372				bias-disable;
1373			};
1374
1375			pcie1_state_on: pcie1-state-on {
1376				perst {
1377					pins = "gpio130";
1378					function = "gpio";
1379					drive-strength = <2>;
1380					bias-pull-down;
1381				};
1382
1383				clkreq {
1384					pins = "gpio131";
1385					function = "pci_e1";
1386					drive-strength = <2>;
1387					bias-pull-up;
1388				};
1389
1390				wake {
1391					pins = "gpio132";
1392					function = "gpio";
1393					drive-strength = <2>;
1394					bias-pull-down;
1395				};
1396			};
1397
1398			pcie1_state_off: pcie1-state-off {
1399				/* Perst is missing? */
1400				clkreq {
1401					pins = "gpio131";
1402					function = "gpio";
1403					drive-strength = <2>;
1404					bias-disable;
1405				};
1406
1407				wake {
1408					pins = "gpio132";
1409					function = "gpio";
1410					drive-strength = <2>;
1411					bias-disable;
1412				};
1413			};
1414
1415			pcie2_state_on: pcie2-state-on {
1416				perst {
1417					pins = "gpio114";
1418					function = "gpio";
1419					drive-strength = <2>;
1420					bias-pull-down;
1421				};
1422
1423				clkreq {
1424					pins = "gpio115";
1425					function = "pci_e2";
1426					drive-strength = <2>;
1427					bias-pull-up;
1428				};
1429
1430				wake {
1431					pins = "gpio116";
1432					function = "gpio";
1433					drive-strength = <2>;
1434					bias-pull-down;
1435				};
1436			};
1437
1438			pcie2_state_off: pcie2-state-off {
1439				/* Perst is missing? */
1440				clkreq {
1441					pins = "gpio115";
1442					function = "gpio";
1443					drive-strength = <2>;
1444					bias-disable;
1445				};
1446
1447				wake {
1448					pins = "gpio116";
1449					function = "gpio";
1450					drive-strength = <2>;
1451					bias-disable;
1452				};
1453			};
1454
1455			sdc1_state_on: sdc1-state-on {
1456				clk {
1457					pins = "sdc1_clk";
1458					bias-disable;
1459					drive-strength = <16>;
1460				};
1461
1462				cmd {
1463					pins = "sdc1_cmd";
1464					bias-pull-up;
1465					drive-strength = <10>;
1466				};
1467
1468				data {
1469					pins = "sdc1_data";
1470					bias-pull-up;
1471					drive-strength = <10>;
1472				};
1473
1474				rclk {
1475					pins = "sdc1_rclk";
1476					bias-pull-down;
1477				};
1478			};
1479
1480			sdc1_state_off: sdc1-state-off {
1481				clk {
1482					pins = "sdc1_clk";
1483					bias-disable;
1484					drive-strength = <2>;
1485				};
1486
1487				cmd {
1488					pins = "sdc1_cmd";
1489					bias-pull-up;
1490					drive-strength = <2>;
1491				};
1492
1493				data {
1494					pins = "sdc1_data";
1495					bias-pull-up;
1496					drive-strength = <2>;
1497				};
1498
1499				rclk {
1500					pins = "sdc1_rclk";
1501					bias-pull-down;
1502				};
1503			};
1504
1505			sdc2_state_on: sdc2-clk-on {
1506				clk {
1507					pins = "sdc2_clk";
1508					bias-disable;
1509					drive-strength = <16>;
1510				};
1511
1512				cmd {
1513					pins = "sdc2_cmd";
1514					bias-pull-up;
1515					drive-strength = <10>;
1516				};
1517
1518				data {
1519					pins = "sdc2_data";
1520					bias-pull-up;
1521					drive-strength = <10>;
1522				};
1523			};
1524
1525			sdc2_state_off: sdc2-clk-off {
1526				clk {
1527					pins = "sdc2_clk";
1528					bias-disable;
1529					drive-strength = <2>;
1530				};
1531
1532				cmd {
1533					pins = "sdc2_cmd";
1534					bias-pull-up;
1535					drive-strength = <2>;
1536				};
1537
1538				data {
1539					pins = "sdc2_data";
1540					bias-pull-up;
1541					drive-strength = <2>;
1542				};
1543			};
1544		};
1545
1546		sram@290000 {
1547			compatible = "qcom,rpm-stats";
1548			reg = <0x00290000 0x10000>;
1549		};
1550
1551		spmi_bus: spmi@400f000 {
1552			compatible = "qcom,spmi-pmic-arb";
1553			reg = <0x0400f000 0x1000>,
1554			      <0x04400000 0x800000>,
1555			      <0x04c00000 0x800000>,
1556			      <0x05800000 0x200000>,
1557			      <0x0400a000 0x002100>;
1558			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1559			interrupt-names = "periph_irq";
1560			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
1561			qcom,ee = <0>;
1562			qcom,channel = <0>;
1563			#address-cells = <2>;
1564			#size-cells = <0>;
1565			interrupt-controller;
1566			#interrupt-cells = <4>;
1567		};
1568
1569		agnoc@0 {
1570			power-domains = <&gcc AGGRE0_NOC_GDSC>;
1571			compatible = "simple-pm-bus";
1572			#address-cells = <1>;
1573			#size-cells = <1>;
1574			ranges;
1575
1576			pcie0: pcie@600000 {
1577				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
1578				status = "disabled";
1579				power-domains = <&gcc PCIE0_GDSC>;
1580				bus-range = <0x00 0xff>;
1581				num-lanes = <1>;
1582
1583				reg = <0x00600000 0x2000>,
1584				      <0x0c000000 0xf1d>,
1585				      <0x0c000f20 0xa8>,
1586				      <0x0c100000 0x100000>;
1587				reg-names = "parf", "dbi", "elbi","config";
1588
1589				phys = <&pciephy_0>;
1590				phy-names = "pciephy";
1591
1592				#address-cells = <3>;
1593				#size-cells = <2>;
1594				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
1595					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
1596
1597				device_type = "pci";
1598
1599				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
1600				interrupt-names = "msi";
1601				#interrupt-cells = <1>;
1602				interrupt-map-mask = <0 0 0 0x7>;
1603				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1604						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1605						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1606						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1607
1608				pinctrl-names = "default", "sleep";
1609				pinctrl-0 = <&pcie0_state_on>;
1610				pinctrl-1 = <&pcie0_state_off>;
1611
1612				linux,pci-domain = <0>;
1613
1614				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1615					<&gcc GCC_PCIE_0_AUX_CLK>,
1616					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1617					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1618					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
1619
1620				clock-names =  "pipe",
1621						"aux",
1622						"cfg",
1623						"bus_master",
1624						"bus_slave";
1625
1626			};
1627
1628			pcie1: pcie@608000 {
1629				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
1630				power-domains = <&gcc PCIE1_GDSC>;
1631				bus-range = <0x00 0xff>;
1632				num-lanes = <1>;
1633
1634				status  = "disabled";
1635
1636				reg = <0x00608000 0x2000>,
1637				      <0x0d000000 0xf1d>,
1638				      <0x0d000f20 0xa8>,
1639				      <0x0d100000 0x100000>;
1640
1641				reg-names = "parf", "dbi", "elbi","config";
1642
1643				phys = <&pciephy_1>;
1644				phy-names = "pciephy";
1645
1646				#address-cells = <3>;
1647				#size-cells = <2>;
1648				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
1649					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
1650
1651				device_type = "pci";
1652
1653				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
1654				interrupt-names = "msi";
1655				#interrupt-cells = <1>;
1656				interrupt-map-mask = <0 0 0 0x7>;
1657				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1658						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1659						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1660						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1661
1662				pinctrl-names = "default", "sleep";
1663				pinctrl-0 = <&pcie1_state_on>;
1664				pinctrl-1 = <&pcie1_state_off>;
1665
1666				linux,pci-domain = <1>;
1667
1668				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1669					<&gcc GCC_PCIE_1_AUX_CLK>,
1670					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1671					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1672					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
1673
1674				clock-names =  "pipe",
1675						"aux",
1676						"cfg",
1677						"bus_master",
1678						"bus_slave";
1679			};
1680
1681			pcie2: pcie@610000 {
1682				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
1683				power-domains = <&gcc PCIE2_GDSC>;
1684				bus-range = <0x00 0xff>;
1685				num-lanes = <1>;
1686				status = "disabled";
1687				reg = <0x00610000 0x2000>,
1688				      <0x0e000000 0xf1d>,
1689				      <0x0e000f20 0xa8>,
1690				      <0x0e100000 0x100000>;
1691
1692				reg-names = "parf", "dbi", "elbi","config";
1693
1694				phys = <&pciephy_2>;
1695				phy-names = "pciephy";
1696
1697				#address-cells = <3>;
1698				#size-cells = <2>;
1699				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
1700					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
1701
1702				device_type = "pci";
1703
1704				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
1705				interrupt-names = "msi";
1706				#interrupt-cells = <1>;
1707				interrupt-map-mask = <0 0 0 0x7>;
1708				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1709						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1710						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1711						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1712
1713				pinctrl-names = "default", "sleep";
1714				pinctrl-0 = <&pcie2_state_on>;
1715				pinctrl-1 = <&pcie2_state_off>;
1716
1717				linux,pci-domain = <2>;
1718				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
1719					<&gcc GCC_PCIE_2_AUX_CLK>,
1720					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
1721					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
1722					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
1723
1724				clock-names =  "pipe",
1725						"aux",
1726						"cfg",
1727						"bus_master",
1728						"bus_slave";
1729			};
1730		};
1731
1732		ufshc: ufshc@624000 {
1733			compatible = "qcom,ufshc";
1734			reg = <0x00624000 0x2500>;
1735			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1736
1737			phys = <&ufsphy_lane>;
1738			phy-names = "ufsphy";
1739
1740			power-domains = <&gcc UFS_GDSC>;
1741
1742			clock-names =
1743				"core_clk_src",
1744				"core_clk",
1745				"bus_clk",
1746				"bus_aggr_clk",
1747				"iface_clk",
1748				"core_clk_unipro_src",
1749				"core_clk_unipro",
1750				"core_clk_ice",
1751				"ref_clk",
1752				"tx_lane0_sync_clk",
1753				"rx_lane0_sync_clk";
1754			clocks =
1755				<&gcc UFS_AXI_CLK_SRC>,
1756				<&gcc GCC_UFS_AXI_CLK>,
1757				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
1758				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
1759				<&gcc GCC_UFS_AHB_CLK>,
1760				<&gcc UFS_ICE_CORE_CLK_SRC>,
1761				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
1762				<&gcc GCC_UFS_ICE_CORE_CLK>,
1763				<&rpmcc RPM_SMD_LN_BB_CLK>,
1764				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
1765				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
1766			freq-table-hz =
1767				<100000000 200000000>,
1768				<0 0>,
1769				<0 0>,
1770				<0 0>,
1771				<0 0>,
1772				<150000000 300000000>,
1773				<0 0>,
1774				<0 0>,
1775				<0 0>,
1776				<0 0>,
1777				<0 0>;
1778
1779			lanes-per-direction = <1>;
1780			#reset-cells = <1>;
1781			status = "disabled";
1782
1783			ufs_variant {
1784				compatible = "qcom,ufs_variant";
1785			};
1786		};
1787
1788		ufsphy: phy@627000 {
1789			compatible = "qcom,msm8996-qmp-ufs-phy";
1790			reg = <0x00627000 0x1c4>;
1791			#address-cells = <1>;
1792			#size-cells = <1>;
1793			ranges;
1794
1795			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
1796			clock-names = "ref";
1797
1798			resets = <&ufshc 0>;
1799			reset-names = "ufsphy";
1800			status = "disabled";
1801
1802			ufsphy_lane: phy@627400 {
1803				reg = <0x627400 0x12c>,
1804				      <0x627600 0x200>,
1805				      <0x627c00 0x1b4>;
1806				#phy-cells = <0>;
1807			};
1808		};
1809
1810		camss: camss@a00000 {
1811			compatible = "qcom,msm8996-camss";
1812			reg = <0x00a34000 0x1000>,
1813			      <0x00a00030 0x4>,
1814			      <0x00a35000 0x1000>,
1815			      <0x00a00038 0x4>,
1816			      <0x00a36000 0x1000>,
1817			      <0x00a00040 0x4>,
1818			      <0x00a30000 0x100>,
1819			      <0x00a30400 0x100>,
1820			      <0x00a30800 0x100>,
1821			      <0x00a30c00 0x100>,
1822			      <0x00a31000 0x500>,
1823			      <0x00a00020 0x10>,
1824			      <0x00a10000 0x1000>,
1825			      <0x00a14000 0x1000>;
1826			reg-names = "csiphy0",
1827				"csiphy0_clk_mux",
1828				"csiphy1",
1829				"csiphy1_clk_mux",
1830				"csiphy2",
1831				"csiphy2_clk_mux",
1832				"csid0",
1833				"csid1",
1834				"csid2",
1835				"csid3",
1836				"ispif",
1837				"csi_clk_mux",
1838				"vfe0",
1839				"vfe1";
1840			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
1841				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
1842				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
1843				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
1844				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
1845				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
1846				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
1847				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
1848				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
1849				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
1850			interrupt-names = "csiphy0",
1851				"csiphy1",
1852				"csiphy2",
1853				"csid0",
1854				"csid1",
1855				"csid2",
1856				"csid3",
1857				"ispif",
1858				"vfe0",
1859				"vfe1";
1860			power-domains = <&mmcc VFE0_GDSC>,
1861					<&mmcc VFE1_GDSC>;
1862			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
1863				<&mmcc CAMSS_ISPIF_AHB_CLK>,
1864				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
1865				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
1866				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
1867				<&mmcc CAMSS_CSI0_AHB_CLK>,
1868				<&mmcc CAMSS_CSI0_CLK>,
1869				<&mmcc CAMSS_CSI0PHY_CLK>,
1870				<&mmcc CAMSS_CSI0PIX_CLK>,
1871				<&mmcc CAMSS_CSI0RDI_CLK>,
1872				<&mmcc CAMSS_CSI1_AHB_CLK>,
1873				<&mmcc CAMSS_CSI1_CLK>,
1874				<&mmcc CAMSS_CSI1PHY_CLK>,
1875				<&mmcc CAMSS_CSI1PIX_CLK>,
1876				<&mmcc CAMSS_CSI1RDI_CLK>,
1877				<&mmcc CAMSS_CSI2_AHB_CLK>,
1878				<&mmcc CAMSS_CSI2_CLK>,
1879				<&mmcc CAMSS_CSI2PHY_CLK>,
1880				<&mmcc CAMSS_CSI2PIX_CLK>,
1881				<&mmcc CAMSS_CSI2RDI_CLK>,
1882				<&mmcc CAMSS_CSI3_AHB_CLK>,
1883				<&mmcc CAMSS_CSI3_CLK>,
1884				<&mmcc CAMSS_CSI3PHY_CLK>,
1885				<&mmcc CAMSS_CSI3PIX_CLK>,
1886				<&mmcc CAMSS_CSI3RDI_CLK>,
1887				<&mmcc CAMSS_AHB_CLK>,
1888				<&mmcc CAMSS_VFE0_CLK>,
1889				<&mmcc CAMSS_CSI_VFE0_CLK>,
1890				<&mmcc CAMSS_VFE0_AHB_CLK>,
1891				<&mmcc CAMSS_VFE0_STREAM_CLK>,
1892				<&mmcc CAMSS_VFE1_CLK>,
1893				<&mmcc CAMSS_CSI_VFE1_CLK>,
1894				<&mmcc CAMSS_VFE1_AHB_CLK>,
1895				<&mmcc CAMSS_VFE1_STREAM_CLK>,
1896				<&mmcc CAMSS_VFE_AHB_CLK>,
1897				<&mmcc CAMSS_VFE_AXI_CLK>;
1898			clock-names = "top_ahb",
1899				"ispif_ahb",
1900				"csiphy0_timer",
1901				"csiphy1_timer",
1902				"csiphy2_timer",
1903				"csi0_ahb",
1904				"csi0",
1905				"csi0_phy",
1906				"csi0_pix",
1907				"csi0_rdi",
1908				"csi1_ahb",
1909				"csi1",
1910				"csi1_phy",
1911				"csi1_pix",
1912				"csi1_rdi",
1913				"csi2_ahb",
1914				"csi2",
1915				"csi2_phy",
1916				"csi2_pix",
1917				"csi2_rdi",
1918				"csi3_ahb",
1919				"csi3",
1920				"csi3_phy",
1921				"csi3_pix",
1922				"csi3_rdi",
1923				"ahb",
1924				"vfe0",
1925				"csi_vfe0",
1926				"vfe0_ahb",
1927				"vfe0_stream",
1928				"vfe1",
1929				"csi_vfe1",
1930				"vfe1_ahb",
1931				"vfe1_stream",
1932				"vfe_ahb",
1933				"vfe_axi";
1934			iommus = <&vfe_smmu 0>,
1935				 <&vfe_smmu 1>,
1936				 <&vfe_smmu 2>,
1937				 <&vfe_smmu 3>;
1938			status = "disabled";
1939			ports {
1940				#address-cells = <1>;
1941				#size-cells = <0>;
1942			};
1943		};
1944
1945		cci: cci@a0c000 {
1946			compatible = "qcom,msm8996-cci";
1947			#address-cells = <1>;
1948			#size-cells = <0>;
1949			reg = <0xa0c000 0x1000>;
1950			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
1951			power-domains = <&mmcc CAMSS_GDSC>;
1952			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
1953				 <&mmcc CAMSS_CCI_AHB_CLK>,
1954				 <&mmcc CAMSS_CCI_CLK>,
1955				 <&mmcc CAMSS_AHB_CLK>;
1956			clock-names = "camss_top_ahb",
1957				      "cci_ahb",
1958				      "cci",
1959				      "camss_ahb";
1960			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
1961					  <&mmcc CAMSS_CCI_CLK>;
1962			assigned-clock-rates = <80000000>, <37500000>;
1963			pinctrl-names = "default";
1964			pinctrl-0 = <&cci0_default &cci1_default>;
1965			status = "disabled";
1966
1967			cci_i2c0: i2c-bus@0 {
1968				reg = <0>;
1969				clock-frequency = <400000>;
1970				#address-cells = <1>;
1971				#size-cells = <0>;
1972			};
1973
1974			cci_i2c1: i2c-bus@1 {
1975				reg = <1>;
1976				clock-frequency = <400000>;
1977				#address-cells = <1>;
1978				#size-cells = <0>;
1979			};
1980		};
1981
1982		adreno_smmu: iommu@b40000 {
1983			compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
1984			reg = <0x00b40000 0x10000>;
1985
1986			#global-interrupts = <1>;
1987			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1988				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1989				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
1990			#iommu-cells = <1>;
1991
1992			clocks = <&mmcc GPU_AHB_CLK>,
1993				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
1994			clock-names = "iface", "bus";
1995
1996			power-domains = <&mmcc GPU_GDSC>;
1997		};
1998
1999		venus: video-codec@c00000 {
2000			compatible = "qcom,msm8996-venus";
2001			reg = <0x00c00000 0xff000>;
2002			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
2003			power-domains = <&mmcc VENUS_GDSC>;
2004			clocks = <&mmcc VIDEO_CORE_CLK>,
2005				 <&mmcc VIDEO_AHB_CLK>,
2006				 <&mmcc VIDEO_AXI_CLK>,
2007				 <&mmcc VIDEO_MAXI_CLK>;
2008			clock-names = "core", "iface", "bus", "mbus";
2009			iommus = <&venus_smmu 0x00>,
2010				 <&venus_smmu 0x01>,
2011				 <&venus_smmu 0x0a>,
2012				 <&venus_smmu 0x07>,
2013				 <&venus_smmu 0x0e>,
2014				 <&venus_smmu 0x0f>,
2015				 <&venus_smmu 0x08>,
2016				 <&venus_smmu 0x09>,
2017				 <&venus_smmu 0x0b>,
2018				 <&venus_smmu 0x0c>,
2019				 <&venus_smmu 0x0d>,
2020				 <&venus_smmu 0x10>,
2021				 <&venus_smmu 0x11>,
2022				 <&venus_smmu 0x21>,
2023				 <&venus_smmu 0x28>,
2024				 <&venus_smmu 0x29>,
2025				 <&venus_smmu 0x2b>,
2026				 <&venus_smmu 0x2c>,
2027				 <&venus_smmu 0x2d>,
2028				 <&venus_smmu 0x31>;
2029			memory-region = <&venus_region>;
2030			status = "disabled";
2031
2032			video-decoder {
2033				compatible = "venus-decoder";
2034				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
2035				clock-names = "core";
2036				power-domains = <&mmcc VENUS_CORE0_GDSC>;
2037			};
2038
2039			video-encoder {
2040				compatible = "venus-encoder";
2041				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
2042				clock-names = "core";
2043				power-domains = <&mmcc VENUS_CORE1_GDSC>;
2044			};
2045		};
2046
2047		mdp_smmu: iommu@d00000 {
2048			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2049			reg = <0x00d00000 0x10000>;
2050
2051			#global-interrupts = <1>;
2052			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
2053				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
2054				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
2055			#iommu-cells = <1>;
2056			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
2057				 <&mmcc SMMU_MDP_AXI_CLK>;
2058			clock-names = "iface", "bus";
2059
2060			power-domains = <&mmcc MDSS_GDSC>;
2061		};
2062
2063		venus_smmu: iommu@d40000 {
2064			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2065			reg = <0x00d40000 0x20000>;
2066			#global-interrupts = <1>;
2067			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
2068				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
2069				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
2070				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
2071				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
2072				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
2073				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
2074				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
2075			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
2076			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
2077				 <&mmcc SMMU_VIDEO_AXI_CLK>;
2078			clock-names = "iface", "bus";
2079			#iommu-cells = <1>;
2080			status = "okay";
2081		};
2082
2083		vfe_smmu: iommu@da0000 {
2084			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2085			reg = <0x00da0000 0x10000>;
2086
2087			#global-interrupts = <1>;
2088			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
2089				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
2090				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
2091			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
2092			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
2093				 <&mmcc SMMU_VFE_AXI_CLK>;
2094			clock-names = "iface",
2095				      "bus";
2096			#iommu-cells = <1>;
2097		};
2098
2099		lpass_q6_smmu: iommu@1600000 {
2100			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2101			reg = <0x01600000 0x20000>;
2102			#iommu-cells = <1>;
2103			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
2104
2105			#global-interrupts = <1>;
2106			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
2107		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
2108		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
2109		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
2110		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
2111		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
2112		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
2113		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
2114		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
2115		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
2116		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
2117		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
2118		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
2119
2120			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
2121				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
2122			clock-names = "iface", "bus";
2123		};
2124
2125		stm@3002000 {
2126			compatible = "arm,coresight-stm", "arm,primecell";
2127			reg = <0x3002000 0x1000>,
2128			      <0x8280000 0x180000>;
2129			reg-names = "stm-base", "stm-stimulus-base";
2130
2131			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2132			clock-names = "apb_pclk", "atclk";
2133
2134			out-ports {
2135				port {
2136					stm_out: endpoint {
2137						remote-endpoint =
2138						  <&funnel0_in>;
2139					};
2140				};
2141			};
2142		};
2143
2144		tpiu@3020000 {
2145			compatible = "arm,coresight-tpiu", "arm,primecell";
2146			reg = <0x3020000 0x1000>;
2147
2148			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2149			clock-names = "apb_pclk", "atclk";
2150
2151			in-ports {
2152				port {
2153					tpiu_in: endpoint {
2154						remote-endpoint =
2155						  <&replicator_out1>;
2156					};
2157				};
2158			};
2159		};
2160
2161		funnel@3021000 {
2162			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2163			reg = <0x3021000 0x1000>;
2164
2165			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2166			clock-names = "apb_pclk", "atclk";
2167
2168			in-ports {
2169				#address-cells = <1>;
2170				#size-cells = <0>;
2171
2172				port@7 {
2173					reg = <7>;
2174					funnel0_in: endpoint {
2175						remote-endpoint =
2176						  <&stm_out>;
2177					};
2178				};
2179			};
2180
2181			out-ports {
2182				port {
2183					funnel0_out: endpoint {
2184						remote-endpoint =
2185						  <&merge_funnel_in0>;
2186					};
2187				};
2188			};
2189		};
2190
2191		funnel@3022000 {
2192			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2193			reg = <0x3022000 0x1000>;
2194
2195			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2196			clock-names = "apb_pclk", "atclk";
2197
2198			in-ports {
2199				#address-cells = <1>;
2200				#size-cells = <0>;
2201
2202				port@6 {
2203					reg = <6>;
2204					funnel1_in: endpoint {
2205						remote-endpoint =
2206						  <&apss_merge_funnel_out>;
2207					};
2208				};
2209			};
2210
2211			out-ports {
2212				port {
2213					funnel1_out: endpoint {
2214						remote-endpoint =
2215						  <&merge_funnel_in1>;
2216					};
2217				};
2218			};
2219		};
2220
2221		funnel@3023000 {
2222			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2223			reg = <0x3023000 0x1000>;
2224
2225			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2226			clock-names = "apb_pclk", "atclk";
2227
2228
2229			out-ports {
2230				port {
2231					funnel2_out: endpoint {
2232						remote-endpoint =
2233						  <&merge_funnel_in2>;
2234					};
2235				};
2236			};
2237		};
2238
2239		funnel@3025000 {
2240			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2241			reg = <0x3025000 0x1000>;
2242
2243			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2244			clock-names = "apb_pclk", "atclk";
2245
2246			in-ports {
2247				#address-cells = <1>;
2248				#size-cells = <0>;
2249
2250				port@0 {
2251					reg = <0>;
2252					merge_funnel_in0: endpoint {
2253						remote-endpoint =
2254						  <&funnel0_out>;
2255					};
2256				};
2257
2258				port@1 {
2259					reg = <1>;
2260					merge_funnel_in1: endpoint {
2261						remote-endpoint =
2262						  <&funnel1_out>;
2263					};
2264				};
2265
2266				port@2 {
2267					reg = <2>;
2268					merge_funnel_in2: endpoint {
2269						remote-endpoint =
2270						  <&funnel2_out>;
2271					};
2272				};
2273			};
2274
2275			out-ports {
2276				port {
2277					merge_funnel_out: endpoint {
2278						remote-endpoint =
2279						  <&etf_in>;
2280					};
2281				};
2282			};
2283		};
2284
2285		replicator@3026000 {
2286			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2287			reg = <0x3026000 0x1000>;
2288
2289			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2290			clock-names = "apb_pclk", "atclk";
2291
2292			in-ports {
2293				port {
2294					replicator_in: endpoint {
2295						remote-endpoint =
2296						  <&etf_out>;
2297					};
2298				};
2299			};
2300
2301			out-ports {
2302				#address-cells = <1>;
2303				#size-cells = <0>;
2304
2305				port@0 {
2306					reg = <0>;
2307					replicator_out0: endpoint {
2308						remote-endpoint =
2309						  <&etr_in>;
2310					};
2311				};
2312
2313				port@1 {
2314					reg = <1>;
2315					replicator_out1: endpoint {
2316						remote-endpoint =
2317						  <&tpiu_in>;
2318					};
2319				};
2320			};
2321		};
2322
2323		etf@3027000 {
2324			compatible = "arm,coresight-tmc", "arm,primecell";
2325			reg = <0x3027000 0x1000>;
2326
2327			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2328			clock-names = "apb_pclk", "atclk";
2329
2330			in-ports {
2331				port {
2332					etf_in: endpoint {
2333						remote-endpoint =
2334						  <&merge_funnel_out>;
2335					};
2336				};
2337			};
2338
2339			out-ports {
2340				port {
2341					etf_out: endpoint {
2342						remote-endpoint =
2343						  <&replicator_in>;
2344					};
2345				};
2346			};
2347		};
2348
2349		etr@3028000 {
2350			compatible = "arm,coresight-tmc", "arm,primecell";
2351			reg = <0x3028000 0x1000>;
2352
2353			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2354			clock-names = "apb_pclk", "atclk";
2355			arm,scatter-gather;
2356
2357			in-ports {
2358				port {
2359					etr_in: endpoint {
2360						remote-endpoint =
2361						  <&replicator_out0>;
2362					};
2363				};
2364			};
2365		};
2366
2367		debug@3810000 {
2368			compatible = "arm,coresight-cpu-debug", "arm,primecell";
2369			reg = <0x3810000 0x1000>;
2370
2371			clocks = <&rpmcc RPM_QDSS_CLK>;
2372			clock-names = "apb_pclk";
2373
2374			cpu = <&CPU0>;
2375		};
2376
2377		etm@3840000 {
2378			compatible = "arm,coresight-etm4x", "arm,primecell";
2379			reg = <0x3840000 0x1000>;
2380
2381			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2382			clock-names = "apb_pclk", "atclk";
2383
2384			cpu = <&CPU0>;
2385
2386			out-ports {
2387				port {
2388					etm0_out: endpoint {
2389						remote-endpoint =
2390						  <&apss_funnel0_in0>;
2391					};
2392				};
2393			};
2394		};
2395
2396		debug@3910000 {
2397			compatible = "arm,coresight-cpu-debug", "arm,primecell";
2398			reg = <0x3910000 0x1000>;
2399
2400			clocks = <&rpmcc RPM_QDSS_CLK>;
2401			clock-names = "apb_pclk";
2402
2403			cpu = <&CPU1>;
2404		};
2405
2406		etm@3940000 {
2407			compatible = "arm,coresight-etm4x", "arm,primecell";
2408			reg = <0x3940000 0x1000>;
2409
2410			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2411			clock-names = "apb_pclk", "atclk";
2412
2413			cpu = <&CPU1>;
2414
2415			out-ports {
2416				port {
2417					etm1_out: endpoint {
2418						remote-endpoint =
2419						  <&apss_funnel0_in1>;
2420					};
2421				};
2422			};
2423		};
2424
2425		funnel@39b0000 { /* APSS Funnel 0 */
2426			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2427			reg = <0x39b0000 0x1000>;
2428
2429			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2430			clock-names = "apb_pclk", "atclk";
2431
2432			in-ports {
2433				#address-cells = <1>;
2434				#size-cells = <0>;
2435
2436				port@0 {
2437					reg = <0>;
2438					apss_funnel0_in0: endpoint {
2439						remote-endpoint = <&etm0_out>;
2440					};
2441				};
2442
2443				port@1 {
2444					reg = <1>;
2445					apss_funnel0_in1: endpoint {
2446						remote-endpoint = <&etm1_out>;
2447					};
2448				};
2449			};
2450
2451			out-ports {
2452				port {
2453					apss_funnel0_out: endpoint {
2454						remote-endpoint =
2455						  <&apss_merge_funnel_in0>;
2456					};
2457				};
2458			};
2459		};
2460
2461		debug@3a10000 {
2462			compatible = "arm,coresight-cpu-debug", "arm,primecell";
2463			reg = <0x3a10000 0x1000>;
2464
2465			clocks = <&rpmcc RPM_QDSS_CLK>;
2466			clock-names = "apb_pclk";
2467
2468			cpu = <&CPU2>;
2469		};
2470
2471		etm@3a40000 {
2472			compatible = "arm,coresight-etm4x", "arm,primecell";
2473			reg = <0x3a40000 0x1000>;
2474
2475			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2476			clock-names = "apb_pclk", "atclk";
2477
2478			cpu = <&CPU2>;
2479
2480			out-ports {
2481				port {
2482					etm2_out: endpoint {
2483						remote-endpoint =
2484						  <&apss_funnel1_in0>;
2485					};
2486				};
2487			};
2488		};
2489
2490		debug@3b10000 {
2491			compatible = "arm,coresight-cpu-debug", "arm,primecell";
2492			reg = <0x3b10000 0x1000>;
2493
2494			clocks = <&rpmcc RPM_QDSS_CLK>;
2495			clock-names = "apb_pclk";
2496
2497			cpu = <&CPU3>;
2498		};
2499
2500		etm@3b40000 {
2501			compatible = "arm,coresight-etm4x", "arm,primecell";
2502			reg = <0x3b40000 0x1000>;
2503
2504			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2505			clock-names = "apb_pclk", "atclk";
2506
2507			cpu = <&CPU3>;
2508
2509			out-ports {
2510				port {
2511					etm3_out: endpoint {
2512						remote-endpoint =
2513						  <&apss_funnel1_in1>;
2514					};
2515				};
2516			};
2517		};
2518
2519		funnel@3bb0000 { /* APSS Funnel 1 */
2520			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2521			reg = <0x3bb0000 0x1000>;
2522
2523			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2524			clock-names = "apb_pclk", "atclk";
2525
2526			in-ports {
2527				#address-cells = <1>;
2528				#size-cells = <0>;
2529
2530				port@0 {
2531					reg = <0>;
2532					apss_funnel1_in0: endpoint {
2533						remote-endpoint = <&etm2_out>;
2534					};
2535				};
2536
2537				port@1 {
2538					reg = <1>;
2539					apss_funnel1_in1: endpoint {
2540						remote-endpoint = <&etm3_out>;
2541					};
2542				};
2543			};
2544
2545			out-ports {
2546				port {
2547					apss_funnel1_out: endpoint {
2548						remote-endpoint =
2549						  <&apss_merge_funnel_in1>;
2550					};
2551				};
2552			};
2553		};
2554
2555		funnel@3bc0000 {
2556			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2557			reg = <0x3bc0000 0x1000>;
2558
2559			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2560			clock-names = "apb_pclk", "atclk";
2561
2562			in-ports {
2563				#address-cells = <1>;
2564				#size-cells = <0>;
2565
2566				port@0 {
2567					reg = <0>;
2568					apss_merge_funnel_in0: endpoint {
2569						remote-endpoint =
2570						  <&apss_funnel0_out>;
2571					};
2572				};
2573
2574				port@1 {
2575					reg = <1>;
2576					apss_merge_funnel_in1: endpoint {
2577						remote-endpoint =
2578						  <&apss_funnel1_out>;
2579					};
2580				};
2581			};
2582
2583			out-ports {
2584				port {
2585					apss_merge_funnel_out: endpoint {
2586						remote-endpoint =
2587						  <&funnel1_in>;
2588					};
2589				};
2590			};
2591		};
2592
2593		kryocc: clock-controller@6400000 {
2594			compatible = "qcom,msm8996-apcc";
2595			reg = <0x06400000 0x90000>;
2596
2597			clock-names = "xo";
2598			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
2599
2600			#clock-cells = <1>;
2601		};
2602
2603		usb3: usb@6af8800 {
2604			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
2605			reg = <0x06af8800 0x400>;
2606			#address-cells = <1>;
2607			#size-cells = <1>;
2608			ranges;
2609
2610			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
2611				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2612			interrupt-names = "hs_phy_irq", "ss_phy_irq";
2613
2614			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
2615				<&gcc GCC_USB30_MASTER_CLK>,
2616				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
2617				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
2618				<&gcc GCC_USB30_SLEEP_CLK>,
2619				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
2620
2621			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2622					  <&gcc GCC_USB30_MASTER_CLK>;
2623			assigned-clock-rates = <19200000>, <120000000>;
2624
2625			power-domains = <&gcc USB30_GDSC>;
2626			status = "disabled";
2627
2628			usb3_dwc3: dwc3@6a00000 {
2629				compatible = "snps,dwc3";
2630				reg = <0x06a00000 0xcc00>;
2631				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
2632				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
2633				phy-names = "usb2-phy", "usb3-phy";
2634				snps,dis_u2_susphy_quirk;
2635				snps,dis_enblslpm_quirk;
2636			};
2637		};
2638
2639		usb3phy: phy@7410000 {
2640			compatible = "qcom,msm8996-qmp-usb3-phy";
2641			reg = <0x07410000 0x1c4>;
2642			#address-cells = <1>;
2643			#size-cells = <1>;
2644			ranges;
2645
2646			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
2647				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2648				<&gcc GCC_USB3_CLKREF_CLK>;
2649			clock-names = "aux", "cfg_ahb", "ref";
2650
2651			resets = <&gcc GCC_USB3_PHY_BCR>,
2652				<&gcc GCC_USB3PHY_PHY_BCR>;
2653			reset-names = "phy", "common";
2654			status = "disabled";
2655
2656			ssusb_phy_0: phy@7410200 {
2657				reg = <0x07410200 0x200>,
2658				      <0x07410400 0x130>,
2659				      <0x07410600 0x1a8>;
2660				#phy-cells = <0>;
2661
2662				#clock-cells = <1>;
2663				clock-output-names = "usb3_phy_pipe_clk_src";
2664				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
2665				clock-names = "pipe0";
2666			};
2667		};
2668
2669		hsusb_phy1: phy@7411000 {
2670			compatible = "qcom,msm8996-qusb2-phy";
2671			reg = <0x07411000 0x180>;
2672			#phy-cells = <0>;
2673
2674			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2675				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
2676			clock-names = "cfg_ahb", "ref";
2677
2678			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2679			nvmem-cells = <&qusb2p_hstx_trim>;
2680			status = "disabled";
2681		};
2682
2683		hsusb_phy2: phy@7412000 {
2684			compatible = "qcom,msm8996-qusb2-phy";
2685			reg = <0x07412000 0x180>;
2686			#phy-cells = <0>;
2687
2688			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2689				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
2690			clock-names = "cfg_ahb", "ref";
2691
2692			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2693			nvmem-cells = <&qusb2s_hstx_trim>;
2694			status = "disabled";
2695		};
2696
2697		sdhc1: sdhci@7464900 {
2698			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
2699			reg = <0x07464900 0x11c>, <0x07464000 0x800>;
2700			reg-names = "hc_mem", "core_mem";
2701
2702			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
2703					<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
2704			interrupt-names = "hc_irq", "pwr_irq";
2705
2706			clock-names = "iface", "core", "xo";
2707			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
2708				<&gcc GCC_SDCC1_APPS_CLK>,
2709				<&rpmcc RPM_SMD_BB_CLK1>;
2710
2711			pinctrl-names = "default", "sleep";
2712			pinctrl-0 = <&sdc1_state_on>;
2713			pinctrl-1 = <&sdc1_state_off>;
2714
2715			bus-width = <8>;
2716			non-removable;
2717			status = "disabled";
2718		};
2719
2720		sdhc2: sdhci@74a4900 {
2721			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
2722			reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
2723			reg-names = "hc_mem", "core_mem";
2724
2725			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
2726				      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
2727			interrupt-names = "hc_irq", "pwr_irq";
2728
2729			clock-names = "iface", "core", "xo";
2730			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2731				<&gcc GCC_SDCC2_APPS_CLK>,
2732				<&rpmcc RPM_SMD_BB_CLK1>;
2733
2734			pinctrl-names = "default", "sleep";
2735			pinctrl-0 = <&sdc2_state_on>;
2736			pinctrl-1 = <&sdc2_state_off>;
2737
2738			bus-width = <4>;
2739			status = "disabled";
2740		 };
2741
2742		blsp1_dma: dma-controller@7544000 {
2743			compatible = "qcom,bam-v1.7.0";
2744			reg = <0x07544000 0x2b000>;
2745			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
2746			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
2747			clock-names = "bam_clk";
2748			qcom,controlled-remotely;
2749			#dma-cells = <1>;
2750			qcom,ee = <0>;
2751		};
2752
2753		blsp1_uart2: serial@7570000 {
2754			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2755			reg = <0x07570000 0x1000>;
2756			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
2757			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
2758				 <&gcc GCC_BLSP1_AHB_CLK>;
2759			clock-names = "core", "iface";
2760			pinctrl-names = "default", "sleep";
2761			pinctrl-0 = <&blsp1_uart2_default>;
2762			pinctrl-1 = <&blsp1_uart2_sleep>;
2763			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
2764			dma-names = "tx", "rx";
2765			status = "disabled";
2766		};
2767
2768		blsp1_spi1: spi@7575000 {
2769			compatible = "qcom,spi-qup-v2.2.1";
2770			reg = <0x07575000 0x600>;
2771			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2772			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
2773				 <&gcc GCC_BLSP1_AHB_CLK>;
2774			clock-names = "core", "iface";
2775			pinctrl-names = "default", "sleep";
2776			pinctrl-0 = <&blsp1_spi1_default>;
2777			pinctrl-1 = <&blsp1_spi1_sleep>;
2778			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2779			dma-names = "tx", "rx";
2780			#address-cells = <1>;
2781			#size-cells = <0>;
2782			status = "disabled";
2783		};
2784
2785		blsp1_i2c3: i2c@7577000 {
2786			compatible = "qcom,i2c-qup-v2.2.1";
2787			reg = <0x07577000 0x1000>;
2788			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2789			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
2790				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
2791			clock-names = "iface", "core";
2792			pinctrl-names = "default", "sleep";
2793			pinctrl-0 = <&blsp1_i2c3_default>;
2794			pinctrl-1 = <&blsp1_i2c3_sleep>;
2795			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2796			dma-names = "tx", "rx";
2797			#address-cells = <1>;
2798			#size-cells = <0>;
2799			status = "disabled";
2800		};
2801
2802		blsp2_dma: dma-controller@7584000 {
2803			compatible = "qcom,bam-v1.7.0";
2804			reg = <0x07584000 0x2b000>;
2805			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
2806			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
2807			clock-names = "bam_clk";
2808			qcom,controlled-remotely;
2809			#dma-cells = <1>;
2810			qcom,ee = <0>;
2811		};
2812
2813		blsp2_uart2: serial@75b0000 {
2814			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2815			reg = <0x075b0000 0x1000>;
2816			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2817			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2818				 <&gcc GCC_BLSP2_AHB_CLK>;
2819			clock-names = "core", "iface";
2820			status = "disabled";
2821		};
2822
2823		blsp2_uart3: serial@75b1000 {
2824			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2825			reg = <0x075b1000 0x1000>;
2826			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
2827			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
2828				 <&gcc GCC_BLSP2_AHB_CLK>;
2829			clock-names = "core", "iface";
2830			status = "disabled";
2831		};
2832
2833		blsp2_i2c1: i2c@75b5000 {
2834			compatible = "qcom,i2c-qup-v2.2.1";
2835			reg = <0x075b5000 0x1000>;
2836			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2837			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
2838				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
2839			clock-names = "iface", "core";
2840			pinctrl-names = "default", "sleep";
2841			pinctrl-0 = <&blsp2_i2c1_default>;
2842			pinctrl-1 = <&blsp2_i2c1_sleep>;
2843			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2844			dma-names = "tx", "rx";
2845			#address-cells = <1>;
2846			#size-cells = <0>;
2847			status = "disabled";
2848		};
2849
2850		blsp2_i2c2: i2c@75b6000 {
2851			compatible = "qcom,i2c-qup-v2.2.1";
2852			reg = <0x075b6000 0x1000>;
2853			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2854			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
2855				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
2856			clock-names = "iface", "core";
2857			pinctrl-names = "default", "sleep";
2858			pinctrl-0 = <&blsp2_i2c2_default>;
2859			pinctrl-1 = <&blsp2_i2c2_sleep>;
2860			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2861			dma-names = "tx", "rx";
2862			#address-cells = <1>;
2863			#size-cells = <0>;
2864			status = "disabled";
2865		};
2866
2867		blsp2_i2c3: i2c@75b7000 {
2868			compatible = "qcom,i2c-qup-v2.2.1";
2869			reg = <0x075b7000 0x1000>;
2870			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2871			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
2872				<&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
2873			clock-names = "iface", "core";
2874			clock-frequency = <400000>;
2875			pinctrl-names = "default", "sleep";
2876			pinctrl-0 = <&blsp2_i2c3_default>;
2877			pinctrl-1 = <&blsp2_i2c3_sleep>;
2878			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2879			dma-names = "tx", "rx";
2880			#address-cells = <1>;
2881			#size-cells = <0>;
2882			status = "disabled";
2883		};
2884
2885		blsp2_i2c5: i2c@75b9000 {
2886			compatible = "qcom,i2c-qup-v2.2.1";
2887			reg = <0x75b9000 0x1000>;
2888			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2889			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
2890				<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
2891			clock-names = "iface", "core";
2892			pinctrl-names = "default";
2893			pinctrl-0 = <&blsp2_i2c5_default>;
2894			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
2895			dma-names = "tx", "rx";
2896			#address-cells = <1>;
2897			#size-cells = <0>;
2898			status = "disabled";
2899		};
2900
2901		blsp2_i2c6: i2c@75ba000 {
2902			compatible = "qcom,i2c-qup-v2.2.1";
2903			reg = <0x75ba000 0x1000>;
2904			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2905			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
2906				<&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>;
2907			clock-names = "iface", "core";
2908			pinctrl-names = "default", "sleep";
2909			pinctrl-0 = <&blsp2_i2c6_default>;
2910			pinctrl-1 = <&blsp2_i2c6_sleep>;
2911			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
2912			dma-names = "tx", "rx";
2913			#address-cells = <1>;
2914			#size-cells = <0>;
2915			status = "disabled";
2916		};
2917
2918		blsp2_spi6: spi@75ba000{
2919			compatible = "qcom,spi-qup-v2.2.1";
2920			reg = <0x075ba000 0x600>;
2921			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2922			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
2923				 <&gcc GCC_BLSP2_AHB_CLK>;
2924			clock-names = "core", "iface";
2925			pinctrl-names = "default", "sleep";
2926			pinctrl-0 = <&blsp2_spi6_default>;
2927			pinctrl-1 = <&blsp2_spi6_sleep>;
2928			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
2929			dma-names = "tx", "rx";
2930			#address-cells = <1>;
2931			#size-cells = <0>;
2932			status = "disabled";
2933		};
2934
2935		usb2: usb@76f8800 {
2936			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
2937			reg = <0x076f8800 0x400>;
2938			#address-cells = <1>;
2939			#size-cells = <1>;
2940			ranges;
2941
2942			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
2943				<&gcc GCC_USB20_MASTER_CLK>,
2944				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
2945				<&gcc GCC_USB20_SLEEP_CLK>,
2946				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
2947
2948			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
2949					  <&gcc GCC_USB20_MASTER_CLK>;
2950			assigned-clock-rates = <19200000>, <60000000>;
2951
2952			power-domains = <&gcc USB30_GDSC>;
2953			qcom,select-utmi-as-pipe-clk;
2954			status = "disabled";
2955
2956			dwc3@7600000 {
2957				compatible = "snps,dwc3";
2958				reg = <0x07600000 0xcc00>;
2959				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
2960				phys = <&hsusb_phy2>;
2961				phy-names = "usb2-phy";
2962				maximum-speed = "high-speed";
2963				snps,dis_u2_susphy_quirk;
2964				snps,dis_enblslpm_quirk;
2965			};
2966		};
2967
2968		slimbam: dma-controller@9184000 {
2969			compatible = "qcom,bam-v1.7.0";
2970			qcom,controlled-remotely;
2971			reg = <0x09184000 0x32000>;
2972			num-channels  = <31>;
2973			interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
2974			#dma-cells = <1>;
2975			qcom,ee = <1>;
2976			qcom,num-ees = <2>;
2977		};
2978
2979		slim_msm: slim@91c0000 {
2980			compatible = "qcom,slim-ngd-v1.5.0";
2981			reg = <0x091c0000 0x2C000>;
2982			reg-names = "ctrl";
2983			interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
2984			dmas =	<&slimbam 3>, <&slimbam 4>,
2985				<&slimbam 5>, <&slimbam 6>;
2986			dma-names = "rx", "tx", "tx2", "rx2";
2987			#address-cells = <1>;
2988			#size-cells = <0>;
2989			ngd@1 {
2990				reg = <1>;
2991				#address-cells = <1>;
2992				#size-cells = <1>;
2993
2994				tasha_ifd: tas-ifd {
2995					compatible = "slim217,1a0";
2996					reg  = <0 0>;
2997				};
2998
2999				wcd9335: codec@1{
3000					pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
3001					pinctrl-names = "default";
3002
3003					compatible = "slim217,1a0";
3004					reg  = <1 0>;
3005
3006					interrupt-parent = <&tlmm>;
3007					interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
3008						     <53 IRQ_TYPE_LEVEL_HIGH>;
3009					interrupt-names  = "intr1", "intr2";
3010					interrupt-controller;
3011					#interrupt-cells = <1>;
3012					reset-gpios = <&tlmm 64 0>;
3013
3014					slim-ifc-dev  = <&tasha_ifd>;
3015
3016					#sound-dai-cells = <1>;
3017				};
3018			};
3019		};
3020
3021		adsp_pil: remoteproc@9300000 {
3022			compatible = "qcom,msm8996-adsp-pil";
3023			reg = <0x09300000 0x80000>;
3024
3025			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
3026					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
3027					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
3028					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
3029					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
3030			interrupt-names = "wdog", "fatal", "ready",
3031					  "handover", "stop-ack";
3032
3033			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
3034			clock-names = "xo";
3035
3036			memory-region = <&adsp_region>;
3037
3038			qcom,smem-states = <&smp2p_adsp_out 0>;
3039			qcom,smem-state-names = "stop";
3040
3041			power-domains = <&rpmpd MSM8996_VDDCX>;
3042			power-domain-names = "cx";
3043
3044			status = "disabled";
3045
3046			smd-edge {
3047				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
3048
3049				label = "lpass";
3050				mboxes = <&apcs_glb 8>;
3051				qcom,smd-edge = <1>;
3052				qcom,remote-pid = <2>;
3053				#address-cells = <1>;
3054				#size-cells = <0>;
3055				apr {
3056					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
3057					compatible = "qcom,apr-v2";
3058					qcom,smd-channels = "apr_audio_svc";
3059					qcom,domain = <APR_DOMAIN_ADSP>;
3060					#address-cells = <1>;
3061					#size-cells = <0>;
3062
3063					q6core {
3064						reg = <APR_SVC_ADSP_CORE>;
3065						compatible = "qcom,q6core";
3066					};
3067
3068					q6afe: q6afe {
3069						compatible = "qcom,q6afe";
3070						reg = <APR_SVC_AFE>;
3071						q6afedai: dais {
3072							compatible = "qcom,q6afe-dais";
3073							#address-cells = <1>;
3074							#size-cells = <0>;
3075							#sound-dai-cells = <1>;
3076							hdmi@1 {
3077								reg = <1>;
3078							};
3079						};
3080					};
3081
3082					q6asm: q6asm {
3083						compatible = "qcom,q6asm";
3084						reg = <APR_SVC_ASM>;
3085						q6asmdai: dais {
3086							compatible = "qcom,q6asm-dais";
3087							#address-cells = <1>;
3088							#size-cells = <0>;
3089							#sound-dai-cells = <1>;
3090							iommus = <&lpass_q6_smmu 1>;
3091						};
3092					};
3093
3094					q6adm: q6adm {
3095						compatible = "qcom,q6adm";
3096						reg = <APR_SVC_ADM>;
3097						q6routing: routing {
3098							compatible = "qcom,q6adm-routing";
3099							#sound-dai-cells = <0>;
3100						};
3101					};
3102				};
3103
3104			};
3105		};
3106
3107		apcs_glb: mailbox@9820000 {
3108			compatible = "qcom,msm8996-apcs-hmss-global";
3109			reg = <0x09820000 0x1000>;
3110
3111			#mbox-cells = <1>;
3112		};
3113
3114		timer@9840000 {
3115			#address-cells = <1>;
3116			#size-cells = <1>;
3117			ranges;
3118			compatible = "arm,armv7-timer-mem";
3119			reg = <0x09840000 0x1000>;
3120			clock-frequency = <19200000>;
3121
3122			frame@9850000 {
3123				frame-number = <0>;
3124				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
3125					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
3126				reg = <0x09850000 0x1000>,
3127				      <0x09860000 0x1000>;
3128			};
3129
3130			frame@9870000 {
3131				frame-number = <1>;
3132				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
3133				reg = <0x09870000 0x1000>;
3134				status = "disabled";
3135			};
3136
3137			frame@9880000 {
3138				frame-number = <2>;
3139				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
3140				reg = <0x09880000 0x1000>;
3141				status = "disabled";
3142			};
3143
3144			frame@9890000 {
3145				frame-number = <3>;
3146				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
3147				reg = <0x09890000 0x1000>;
3148				status = "disabled";
3149			};
3150
3151			frame@98a0000 {
3152				frame-number = <4>;
3153				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
3154				reg = <0x098a0000 0x1000>;
3155				status = "disabled";
3156			};
3157
3158			frame@98b0000 {
3159				frame-number = <5>;
3160				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
3161				reg = <0x098b0000 0x1000>;
3162				status = "disabled";
3163			};
3164
3165			frame@98c0000 {
3166				frame-number = <6>;
3167				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
3168				reg = <0x098c0000 0x1000>;
3169				status = "disabled";
3170			};
3171		};
3172
3173		saw3: syscon@9a10000 {
3174			compatible = "syscon";
3175			reg = <0x09a10000 0x1000>;
3176		};
3177
3178		intc: interrupt-controller@9bc0000 {
3179			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
3180			#interrupt-cells = <3>;
3181			interrupt-controller;
3182			#redistributor-regions = <1>;
3183			redistributor-stride = <0x0 0x40000>;
3184			reg = <0x09bc0000 0x10000>,
3185			      <0x09c00000 0x100000>;
3186			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3187		};
3188	};
3189
3190	sound: sound {
3191	};
3192
3193	thermal-zones {
3194		cpu0-thermal {
3195			polling-delay-passive = <250>;
3196			polling-delay = <1000>;
3197
3198			thermal-sensors = <&tsens0 3>;
3199
3200			trips {
3201				cpu0_alert0: trip-point0 {
3202					temperature = <75000>;
3203					hysteresis = <2000>;
3204					type = "passive";
3205				};
3206
3207				cpu0_crit: cpu_crit {
3208					temperature = <110000>;
3209					hysteresis = <2000>;
3210					type = "critical";
3211				};
3212			};
3213		};
3214
3215		cpu1-thermal {
3216			polling-delay-passive = <250>;
3217			polling-delay = <1000>;
3218
3219			thermal-sensors = <&tsens0 5>;
3220
3221			trips {
3222				cpu1_alert0: trip-point0 {
3223					temperature = <75000>;
3224					hysteresis = <2000>;
3225					type = "passive";
3226				};
3227
3228				cpu1_crit: cpu_crit {
3229					temperature = <110000>;
3230					hysteresis = <2000>;
3231					type = "critical";
3232				};
3233			};
3234		};
3235
3236		cpu2-thermal {
3237			polling-delay-passive = <250>;
3238			polling-delay = <1000>;
3239
3240			thermal-sensors = <&tsens0 8>;
3241
3242			trips {
3243				cpu2_alert0: trip-point0 {
3244					temperature = <75000>;
3245					hysteresis = <2000>;
3246					type = "passive";
3247				};
3248
3249				cpu2_crit: cpu_crit {
3250					temperature = <110000>;
3251					hysteresis = <2000>;
3252					type = "critical";
3253				};
3254			};
3255		};
3256
3257		cpu3-thermal {
3258			polling-delay-passive = <250>;
3259			polling-delay = <1000>;
3260
3261			thermal-sensors = <&tsens0 10>;
3262
3263			trips {
3264				cpu3_alert0: trip-point0 {
3265					temperature = <75000>;
3266					hysteresis = <2000>;
3267					type = "passive";
3268				};
3269
3270				cpu3_crit: cpu_crit {
3271					temperature = <110000>;
3272					hysteresis = <2000>;
3273					type = "critical";
3274				};
3275			};
3276		};
3277
3278		gpu-top-thermal {
3279			polling-delay-passive = <250>;
3280			polling-delay = <1000>;
3281
3282			thermal-sensors = <&tsens1 6>;
3283
3284			trips {
3285				gpu1_alert0: trip-point0 {
3286					temperature = <90000>;
3287					hysteresis = <2000>;
3288					type = "passive";
3289				};
3290			};
3291
3292			cooling-maps {
3293				map0 {
3294					trip = <&gpu1_alert0>;
3295					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3296				};
3297			};
3298		};
3299
3300		gpu-bottom-thermal {
3301			polling-delay-passive = <250>;
3302			polling-delay = <1000>;
3303
3304			thermal-sensors = <&tsens1 7>;
3305
3306			trips {
3307				gpu2_alert0: trip-point0 {
3308					temperature = <90000>;
3309					hysteresis = <2000>;
3310					type = "passive";
3311				};
3312			};
3313
3314			cooling-maps {
3315				map0 {
3316					trip = <&gpu2_alert0>;
3317					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3318				};
3319			};
3320		};
3321
3322		m4m-thermal {
3323			polling-delay-passive = <250>;
3324			polling-delay = <1000>;
3325
3326			thermal-sensors = <&tsens0 1>;
3327
3328			trips {
3329				m4m_alert0: trip-point0 {
3330					temperature = <90000>;
3331					hysteresis = <2000>;
3332					type = "hot";
3333				};
3334			};
3335		};
3336
3337		l3-or-venus-thermal {
3338			polling-delay-passive = <250>;
3339			polling-delay = <1000>;
3340
3341			thermal-sensors = <&tsens0 2>;
3342
3343			trips {
3344				l3_or_venus_alert0: trip-point0 {
3345					temperature = <90000>;
3346					hysteresis = <2000>;
3347					type = "hot";
3348				};
3349			};
3350		};
3351
3352		cluster0-l2-thermal {
3353			polling-delay-passive = <250>;
3354			polling-delay = <1000>;
3355
3356			thermal-sensors = <&tsens0 7>;
3357
3358			trips {
3359				cluster0_l2_alert0: trip-point0 {
3360					temperature = <90000>;
3361					hysteresis = <2000>;
3362					type = "hot";
3363				};
3364			};
3365		};
3366
3367		cluster1-l2-thermal {
3368			polling-delay-passive = <250>;
3369			polling-delay = <1000>;
3370
3371			thermal-sensors = <&tsens0 12>;
3372
3373			trips {
3374				cluster1_l2_alert0: trip-point0 {
3375					temperature = <90000>;
3376					hysteresis = <2000>;
3377					type = "hot";
3378				};
3379			};
3380		};
3381
3382		camera-thermal {
3383			polling-delay-passive = <250>;
3384			polling-delay = <1000>;
3385
3386			thermal-sensors = <&tsens1 1>;
3387
3388			trips {
3389				camera_alert0: trip-point0 {
3390					temperature = <90000>;
3391					hysteresis = <2000>;
3392					type = "hot";
3393				};
3394			};
3395		};
3396
3397		q6-dsp-thermal {
3398			polling-delay-passive = <250>;
3399			polling-delay = <1000>;
3400
3401			thermal-sensors = <&tsens1 2>;
3402
3403			trips {
3404				q6_dsp_alert0: trip-point0 {
3405					temperature = <90000>;
3406					hysteresis = <2000>;
3407					type = "hot";
3408				};
3409			};
3410		};
3411
3412		mem-thermal {
3413			polling-delay-passive = <250>;
3414			polling-delay = <1000>;
3415
3416			thermal-sensors = <&tsens1 3>;
3417
3418			trips {
3419				mem_alert0: trip-point0 {
3420					temperature = <90000>;
3421					hysteresis = <2000>;
3422					type = "hot";
3423				};
3424			};
3425		};
3426
3427		modemtx-thermal {
3428			polling-delay-passive = <250>;
3429			polling-delay = <1000>;
3430
3431			thermal-sensors = <&tsens1 4>;
3432
3433			trips {
3434				modemtx_alert0: trip-point0 {
3435					temperature = <90000>;
3436					hysteresis = <2000>;
3437					type = "hot";
3438				};
3439			};
3440		};
3441	};
3442
3443	timer {
3444		compatible = "arm,armv8-timer";
3445		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
3446			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
3447			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
3448			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
3449	};
3450};
3451