1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> 4 */ 5 6/dts-v1/; 7 8#include "msm8996.dtsi" 9#include "pm8994.dtsi" 10#include "pmi8994.dtsi" 11#include <dt-bindings/input/input.h> 12#include <dt-bindings/gpio/gpio.h> 13#include <dt-bindings/leds/common.h> 14#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 15 16/ { 17 clocks { 18 compatible = "simple-bus"; 19 20 divclk1_cdc: divclk1 { 21 compatible = "gpio-gate-clock"; 22 clocks = <&rpmcc RPM_SMD_DIV_CLK1>; 23 #clock-cells = <0>; 24 enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; 25 26 pinctrl-names = "default"; 27 pinctrl-0 = <&divclk1_default>; 28 }; 29 30 divclk4: divclk4 { 31 compatible = "fixed-clock"; 32 #clock-cells = <0>; 33 clock-frequency = <32768>; 34 clock-output-names = "divclk4"; 35 36 pinctrl-names = "default"; 37 pinctrl-0 = <&divclk4_pin_a>; 38 }; 39 }; 40 41 gpio_keys { 42 compatible = "gpio-keys"; 43 44 vol_up { 45 label = "Volume Up"; 46 gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; 47 linux,code = <KEY_VOLUMEUP>; 48 wakeup-source; 49 debounce-interval = <15>; 50 }; 51 52 dome { 53 label = "Home"; 54 gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; 55 linux,code = <KEY_HOME>; 56 wakeup-source; 57 debounce-interval = <15>; 58 }; 59 }; 60 61 reserved-memory { 62 memory@88800000 { 63 reg = <0x0 0x88800000 0x0 0x1400000>; 64 no-map; 65 }; 66 67 /* This platform has all PIL regions offset by 0x1400000 */ 68 /delete-node/ mpss@88800000; 69 mpss_region: mpss@89c00000 { 70 reg = <0x0 0x89c00000 0x0 0x6200000>; 71 no-map; 72 }; 73 74 /delete-node/ adsp@8ea00000; 75 adsp_region: adsp@8ea00000 { 76 reg = <0x0 0x8fe00000 0x0 0x1b00000>; 77 no-map; 78 }; 79 80 /delete-node/ slpi@90b00000; 81 slpi_region: slpi@91900000 { 82 reg = <0x0 0x91900000 0x0 0xa00000>; 83 no-map; 84 }; 85 86 /delete-node/ gpu@8f200000; 87 zap_shader_region: gpu@92300000 { 88 compatible = "shared-dma-pool"; 89 reg = <0x0 0x92300000 0x0 0x2000>; 90 no-map; 91 }; 92 93 /delete-node/ venus@91000000; 94 venus_region: venus@90400000 { 95 reg = <0x0 0x92400000 0x0 0x500000>; 96 no-map; 97 }; 98 99 ramoops@92900000 { 100 compatible = "ramoops"; 101 reg = <0x0 0x92900000 0x0 0x100000>; 102 no-map; 103 104 record-size = <0x8000>; 105 console-size = <0x80000>; 106 ftrace-size = <0x20000>; 107 pmsg-size = <0x40000>; 108 }; 109 110 /delete-node/ rmtfs@86700000; 111 rmtfs@f6c00000 { 112 compatible = "qcom,rmtfs-mem"; 113 reg = <0 0xf6c00000 0 0x200000>; 114 no-map; 115 116 qcom,client-id = <1>; 117 qcom,vmid = <15>; 118 }; 119 120 /delete-node/ mba@91500000; 121 mba_region: mba@f6f00000 { 122 reg = <0x0 0xf6f00000 0x0 0x100000>; 123 no-map; 124 }; 125 }; 126 127 vph_pwr: vph-pwr-regulator { 128 compatible = "regulator-fixed"; 129 regulator-name = "vph_pwr"; 130 regulator-min-microvolt = <3800000>; 131 regulator-max-microvolt = <3800000>; 132 regulator-always-on; 133 regulator-boot-on; 134 }; 135 136 vdd_3v2_tp: vdd-3v2-tp { 137 compatible = "regulator-fixed"; 138 regulator-name = "vdd_3v2_tp"; 139 regulator-min-microvolt = <3200000>; 140 regulator-max-microvolt = <3200000>; 141 startup-delay-us = <4000>; 142 vin-supply = <&vph_pwr>; 143 144 gpio = <&tlmm 73 0>; 145 enable-active-high; 146 }; 147 148 vdd_3v3: rome-vreg { 149 compatible = "regulator-fixed"; 150 regulator-name = "vdd_3v3"; 151 regulator-min-microvolt = <3300000>; 152 regulator-max-microvolt = <3300000>; 153 startup-delay-us = <4000>; 154 vin-supply = <&vph_pwr_bbyp>; 155 156 gpio = <&pm8994_gpios 9 0>; 157 enable-active-high; 158 pinctrl-names = "default"; 159 pinctrl-0 = <&rome_enable_default>; 160 161 /* Required by QCA6174a - vddpe-3v3 */ 162 regulator-always-on; 163 }; 164 165 /* WL_EN pin defined as a fixed regulator */ 166 wlan_en: wlan-en-1-8v { 167 compatible = "regulator-fixed"; 168 regulator-name = "wlan-en-regulator"; 169 regulator-min-microvolt = <1800000>; 170 regulator-max-microvolt = <1800000>; 171 172 gpio = <&pm8994_gpios 8 0>; 173 /* WLAN card specific delay */ 174 startup-delay-us = <70000>; 175 enable-active-high; 176 pinctrl-names = "default"; 177 pinctrl-0 = <&wlan_en_default>; 178 }; 179}; 180 181&adsp_pil { 182 status = "okay"; 183}; 184 185&blsp2_i2c2 { 186 status = "okay"; 187 label = "NFC_I2C"; 188 clock-frequency = <400000>; 189 190 nfc: pn548@28 { 191 compatible = "nxp,nxp-nci-i2c"; 192 193 reg = <0x28>; 194 195 interrupt-parent = <&tlmm>; 196 interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; 197 198 enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; 199 firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; 200 201 pinctrl-names = "default"; 202 pinctrl-0 = <&nfc_default>; 203 }; 204}; 205 206&blsp2_i2c3 { 207 status = "okay"; 208 label = "TYPEC_I2C"; 209 210 typec: tusb320@47 { 211 compatible = "ti,tusb320"; 212 reg = <0x47>; 213 interrupt-parent = <&tlmm>; 214 interrupts = <63 IRQ_TYPE_EDGE_RISING>; 215 }; 216}; 217 218&blsp2_i2c6 { 219 status = "okay"; 220 label = "MSM_TS_I2C"; 221}; 222 223&blsp1_uart2 { 224 status = "okay"; 225 label = "QCA_UART"; 226 227 bluetooth: qca6174a { 228 compatible = "qcom,qca6174-bt"; 229 230 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; 231 clocks = <&divclk4>; 232 }; 233}; 234 235&dsi0 { 236 status = "okay"; 237 238 vdd-supply = <&vreg_l2a_1p25>; 239 vddio-supply = <&vreg_l14a_1p8>; 240 241 pinctrl-names = "default", "sleep"; 242 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; 243 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; 244}; 245 246&dsi0_out { 247 status = "okay"; 248 249 data-lanes = <0 1 2 3>; 250}; 251 252&dsi0_phy { 253 status = "okay"; 254 255 vcca-supply = <&vreg_l28a_0p925>; 256}; 257 258&gpu { 259 status = "okay"; 260}; 261 262&mdss { 263 status = "okay"; 264}; 265 266&mmcc { 267 vdd-gfx-supply = <&vdd_gfx>; 268}; 269 270&pcie0 { 271 status = "okay"; 272 273 /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ 274 vddpe-3v3-supply = <&wlan_en>; 275 vdda-supply = <&vreg_l28a_0p925>; 276 277 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; 278 wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; 279}; 280 281&pcie_phy { 282 status = "okay"; 283 284 vdda-phy-supply = <&vreg_l28a_0p925>; 285 vdda-pll-supply = <&vreg_l12a_1p8>; 286}; 287 288&pm8994_resin { 289 status = "okay"; 290 291 linux,code = <KEY_VOLUMEDOWN>; 292}; 293 294&usb3 { 295 status = "okay"; 296 extcon = <&typec>; 297 298 qcom,select-utmi-as-pipe-clk; 299 300 dwc3@6a00000 { 301 extcon = <&typec>; 302 303 /* usb3-phy is not used on this device */ 304 phys = <&hsusb_phy1>; 305 phy-names = "usb2-phy"; 306 307 maximum-speed = "high-speed"; 308 snps,is-utmi-l1-suspend; 309 snps,usb2-gadget-lpm-disable; 310 snps,hird-threshold = /bits/ 8 <0>; 311 }; 312}; 313 314&hsusb_phy1 { 315 status = "okay"; 316 extcon = <&typec>; 317 318 vdda-pll-supply = <&vreg_l12a_1p8>; 319 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 320}; 321 322&ufshc { 323 status = "okay"; 324 325 vcc-supply = <&vreg_l20a_2p95>; 326 vccq-supply = <&vreg_l25a_1p2>; 327 vccq2-supply = <&vreg_s4a_1p8>; 328 329 vcc-max-microamp = <600000>; 330 vccq-max-microamp = <450000>; 331 vccq2-max-microamp = <450000>; 332}; 333 334&ufsphy { 335 status = "okay"; 336 337 vdda-phy-supply = <&vreg_l28a_0p925>; 338 vdda-pll-supply = <&vreg_l12a_1p8>; 339 340 vdda-phy-max-microamp = <18380>; 341 vdda-pll-max-microamp = <9440>; 342 343 vddp-ref-clk-supply = <&vreg_l25a_1p2>; 344 vddp-ref-clk-max-microamp = <100>; 345 vddp-ref-clk-always-on; 346}; 347 348&venus { 349 status = "okay"; 350}; 351 352&wcd9335 { 353 clock-names = "mclk", "slimbus"; 354 clocks = <&divclk1_cdc>, 355 <&rpmcc RPM_SMD_BB_CLK1>; 356 357 vdd-buck-supply = <&vreg_s4a_1p8>; 358 vdd-buck-sido-supply = <&vreg_s4a_1p8>; 359 vdd-rx-supply = <&vreg_s4a_1p8>; 360 vdd-tx-supply = <&vreg_s4a_1p8>; 361 vdd-vbat-supply = <&vph_pwr>; 362 vdd-micbias-supply = <&vph_pwr_bbyp>; 363 vdd-io-supply = <&vreg_s4a_1p8>; 364}; 365 366&rpm_requests { 367 pm8994-regulators { 368 compatible = "qcom,rpm-pm8994-regulators"; 369 370 vdd_s1-supply = <&vph_pwr>; 371 vdd_s2-supply = <&vph_pwr>; 372 vdd_s3-supply = <&vph_pwr>; 373 vdd_s4-supply = <&vph_pwr>; 374 vdd_s5-supply = <&vph_pwr>; 375 vdd_s6-supply = <&vph_pwr>; 376 vdd_s7-supply = <&vph_pwr>; 377 vdd_s8-supply = <&vph_pwr>; 378 vdd_s9-supply = <&vph_pwr>; 379 vdd_s10-supply = <&vph_pwr>; 380 vdd_s11-supply = <&vph_pwr>; 381 vdd_s12-supply = <&vph_pwr>; 382 vdd_l1-supply = <&vreg_s1b_1p025>; 383 vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; 384 vdd_l3_l11-supply = <&vreg_s3a_1p3>; 385 vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; 386 vdd_l5_l7-supply = <&vreg_s5a_2p15>; 387 vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; 388 vdd_l8_l16_l30-supply = <&vph_pwr>; 389 vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; 390 vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; 391 vdd_l14_l15-supply = <&vreg_s5a_2p15>; 392 vdd_l17_l29-supply = <&vph_pwr_bbyp>; 393 vdd_l20_l21-supply = <&vph_pwr_bbyp>; 394 vdd_l25-supply = <&vreg_s3a_1p3>; 395 vdd_lvs1_2-supply = <&vreg_s4a_1p8>; 396 397 vreg_s3a_1p3: s3 { 398 regulator-name = "vreg_s3a_1p3"; 399 regulator-min-microvolt = <1300000>; 400 regulator-max-microvolt = <1300000>; 401 402 /* Required by QCA6174a - vdd-core */ 403 regulator-always-on; 404 }; 405 vreg_s4a_1p8: s4 { 406 regulator-name = "vreg_s4a_1p8"; 407 regulator-min-microvolt = <1800000>; 408 regulator-max-microvolt = <1800000>; 409 regulator-allow-set-load; 410 411 /* Required by QCA6174a - vddio */ 412 regulator-always-on; 413 }; 414 vreg_s5a_2p15: s5 { 415 regulator-name = "vreg_s5a_2p15"; 416 regulator-min-microvolt = <2150000>; 417 regulator-max-microvolt = <2150000>; 418 }; 419 vreg_s7a_0p8: s7 { 420 regulator-name = "vreg_s7a_0p8"; 421 regulator-min-microvolt = <800000>; 422 regulator-max-microvolt = <800000>; 423 }; 424 vreg_l1a_1p0: l1 { 425 regulator-name = "vreg_l1a_1p0"; 426 regulator-min-microvolt = <1000000>; 427 regulator-max-microvolt = <1000000>; 428 }; 429 vreg_l2a_1p25: l2 { 430 regulator-name = "vreg_l2a_1p25"; 431 regulator-min-microvolt = <1250000>; 432 regulator-max-microvolt = <1250000>; 433 }; 434 vreg_l4a_1p225: l4 { 435 regulator-name = "vreg_l4a_1p225"; 436 regulator-min-microvolt = <1225000>; 437 regulator-max-microvolt = <1225000>; 438 }; 439 vreg_l6a_1p8: l6 { 440 regulator-name = "vreg_l6a_1p8"; 441 regulator-min-microvolt = <1800000>; 442 regulator-max-microvolt = <1800000>; 443 }; 444 vreg_l8a_1p8: l8 { 445 regulator-name = "vreg_l8a_1p8"; 446 regulator-min-microvolt = <1800000>; 447 regulator-max-microvolt = <1800000>; 448 }; 449 vreg_l9a_1p8: l9 { 450 regulator-name = "vreg_l9a_1p8"; 451 regulator-min-microvolt = <1800000>; 452 regulator-max-microvolt = <1800000>; 453 }; 454 vreg_l10a_1p8: l10 { 455 regulator-name = "vreg_l10a_1p8"; 456 regulator-min-microvolt = <1800000>; 457 regulator-max-microvolt = <1800000>; 458 }; 459 vreg_l12a_1p8: l12 { 460 regulator-name = "vreg_l12a_1p8"; 461 regulator-min-microvolt = <1800000>; 462 regulator-max-microvolt = <1800000>; 463 regulator-allow-set-load; 464 }; 465 vreg_l13a_2p95: l13 { 466 regulator-name = "vreg_l13a_2p95"; 467 regulator-min-microvolt = <1800000>; 468 regulator-max-microvolt = <2950000>; 469 }; 470 vreg_l14a_1p8: l14 { 471 regulator-name = "vreg_l14a_1p8"; 472 regulator-min-microvolt = <1800000>; 473 regulator-max-microvolt = <1800000>; 474 }; 475 vreg_l15a_1p8: l15 { 476 regulator-name = "vreg_l15a_1p8"; 477 regulator-min-microvolt = <1800000>; 478 regulator-max-microvolt = <1800000>; 479 }; 480 vreg_l16a_2p7: l16 { 481 regulator-name = "vreg_l16a_2p7"; 482 regulator-min-microvolt = <2700000>; 483 regulator-max-microvolt = <2700000>; 484 }; 485 vreg_l19a_3p3: l19 { 486 regulator-name = "vreg_l19a_3p3"; 487 regulator-min-microvolt = <3000000>; 488 regulator-max-microvolt = <3000000>; 489 }; 490 vreg_l20a_2p95: l20 { 491 regulator-name = "vreg_l20a_2p95"; 492 regulator-min-microvolt = <2950000>; 493 regulator-max-microvolt = <2950000>; 494 regulator-allow-set-load; 495 }; 496 vreg_l21a_2p95: l21 { 497 regulator-name = "vreg_l21a_2p95"; 498 regulator-min-microvolt = <3300000>; 499 regulator-max-microvolt = <3300000>; 500 regulator-always-on; 501 }; 502 vreg_l23a_2p8: l23 { 503 regulator-name = "vreg_l23a_2p8"; 504 regulator-min-microvolt = <2800000>; 505 regulator-max-microvolt = <2800000>; 506 }; 507 vreg_l24a_3p075: l24 { 508 regulator-name = "vreg_l24a_3p075"; 509 regulator-min-microvolt = <3075000>; 510 regulator-max-microvolt = <3075000>; 511 }; 512 vreg_l25a_1p2: l25 { 513 regulator-name = "vreg_l25a_1p2"; 514 regulator-min-microvolt = <1200000>; 515 regulator-max-microvolt = <1200000>; 516 regulator-allow-set-load; 517 }; 518 vreg_l27a_1p2: l27 { 519 regulator-name = "vreg_l27a_1p2"; 520 regulator-min-microvolt = <1200000>; 521 regulator-max-microvolt = <1200000>; 522 }; 523 vreg_l28a_0p925: l28 { 524 regulator-name = "vreg_l28a_0p925"; 525 regulator-min-microvolt = <925000>; 526 regulator-max-microvolt = <925000>; 527 regulator-allow-set-load; 528 }; 529 vreg_l30a_1p8: l30 { 530 regulator-name = "vreg_l30a_1p8"; 531 regulator-min-microvolt = <1800000>; 532 regulator-max-microvolt = <1800000>; 533 534 /* Required by QCA6174a - vddio-xtal */ 535 regulator-always-on; 536 }; 537 vreg_l32a_1p8: l32 { 538 regulator-name = "vreg_l32a_1p8"; 539 regulator-min-microvolt = <1800000>; 540 regulator-max-microvolt = <1800000>; 541 }; 542 vreg_lvs1a_1p8: lvs1 { 543 regulator-min-microvolt = <1800000>; 544 regulator-max-microvolt = <1800000>; 545 }; 546 vreg_lvs2a_1p8: lvs2 { 547 regulator-min-microvolt = <1800000>; 548 regulator-max-microvolt = <1800000>; 549 }; 550 }; 551 552 pmi8994-regulators { 553 compatible = "qcom,rpm-pmi8994-regulators"; 554 555 vdd_s1-supply = <&vph_pwr>; 556 vdd_s2-supply = <&vph_pwr>; 557 vdd_s3-supply = <&vph_pwr>; 558 vdd_bst_byp-supply = <&vph_pwr>; 559 560 vreg_s1b_1p025: s1 { 561 regulator-name = "vreg_s1b_1p025"; 562 regulator-min-microvolt = <1025000>; 563 regulator-max-microvolt = <1025000>; 564 }; 565 566 vph_pwr_bbyp: boost-bypass { 567 regulator-name = "vph_pwr_bbyp"; 568 regulator-min-microvolt = <3150000>; 569 regulator-max-microvolt = <3600000>; 570 }; 571 }; 572}; 573 574&pm8994_spmi_regulators { 575 qcom,saw-reg = <&saw3>; 576 s8 { 577 qcom,saw-slave; 578 }; 579 s9 { 580 qcom,saw-slave; 581 }; 582 s10 { 583 qcom,saw-slave; 584 }; 585 vreg_apc_0p8: s11 { 586 qcom,saw-leader; 587 regulator-name = "vreg_apc_0p8"; 588 regulator-min-microvolt = <470000>; 589 regulator-max-microvolt = <1140000>; 590 regulator-max-step-microvolt = <150000>; 591 regulator-always-on; 592 }; 593}; 594 595&pmi8994_spmi_regulators { 596 vdd_gfx: s2 { 597 regulator-name = "vdd_gfx"; 598 regulator-min-microvolt = <400000>; 599 regulator-max-microvolt = <1015000>; 600 regulator-enable-ramp-delay = <500>; 601 }; 602}; 603 604&pm8994_gpios { 605 wlan_en_default: wlan-en-default { 606 pins = "gpio8"; 607 function = PMIC_GPIO_FUNC_NORMAL; 608 output-low; 609 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 610 power-source = <PM8994_GPIO_S4>; 611 bias-disable; 612 }; 613 614 rome_enable_default: rome-enable-default { 615 pins = "gpio9"; 616 function = PMIC_GPIO_FUNC_NORMAL; 617 output-high; 618 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 619 power-source = <PM8994_GPIO_VPH>; 620 }; 621 622 divclk1_default: divclk1_default { 623 pins = "gpio15"; 624 function = PMIC_GPIO_FUNC_FUNC1; 625 bias-disable; 626 power-source = <PM8994_GPIO_S4>; 627 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 628 }; 629 630 divclk4_pin_a: divclk4 { 631 pins = "gpio18"; 632 function = PMIC_GPIO_FUNC_FUNC2; 633 bias-disable; 634 power-source = <PM8994_GPIO_S4>; 635 }; 636}; 637 638&tlmm { 639 mdss_dsi_default: mdss_dsi_default { 640 pins = "gpio8"; 641 function = "gpio"; 642 drive-strength = <8>; 643 bias-disable; 644 }; 645 646 mdss_dsi_sleep: mdss_dsi_sleep { 647 pins = "gpio8"; 648 function = "gpio"; 649 drive-strength = <2>; 650 bias-pull-down; 651 }; 652 653 mdss_te_default: mdss_te_default { 654 pins = "gpio10"; 655 function = "mdp_vsync"; 656 drive-strength = <2>; 657 bias-pull-down; 658 }; 659 660 mdss_te_sleep: mdss_te_sleep { 661 pins = "gpio10"; 662 function = "mdp_vsync"; 663 drive-strength = <2>; 664 bias-pull-down; 665 }; 666 667 nfc_default: nfc_default { 668 pins = "gpio12", "gpio21"; 669 function = "gpio"; 670 drive-strength = <16>; 671 bias-pull-up; 672 }; 673}; 674