1// SPDX-License-Identifier: BSD-3-Clause 2/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ 3 4#include <dt-bindings/clock/qcom,gcc-msm8953.h> 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/power/qcom-rpmpd.h> 8#include <dt-bindings/thermal/thermal.h> 9 10/ { 11 interrupt-parent = <&intc>; 12 13 #address-cells = <2>; 14 #size-cells = <2>; 15 16 chosen { }; 17 18 clocks { 19 sleep_clk: sleep-clk { 20 compatible = "fixed-clock"; 21 #clock-cells = <0>; 22 clock-frequency = <32768>; 23 }; 24 25 xo_board: xo-board { 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 clock-frequency = <19200000>; 29 clock-output-names = "xo"; 30 }; 31 }; 32 33 cpus { 34 #address-cells = <1>; 35 #size-cells = <0>; 36 37 CPU0: cpu@0 { 38 device_type = "cpu"; 39 compatible = "arm,cortex-a53"; 40 reg = <0x0>; 41 enable-method = "psci"; 42 capacity-dmips-mhz = <1024>; 43 next-level-cache = <&L2_0>; 44 #cooling-cells = <2>; 45 46 l1-icache { 47 compatible = "cache"; 48 }; 49 l1-dcache { 50 compatible = "cache"; 51 }; 52 }; 53 54 CPU1: cpu@1 { 55 device_type = "cpu"; 56 compatible = "arm,cortex-a53"; 57 reg = <0x1>; 58 enable-method = "psci"; 59 capacity-dmips-mhz = <1024>; 60 next-level-cache = <&L2_0>; 61 #cooling-cells = <2>; 62 63 l1-icache { 64 compatible = "cache"; 65 }; 66 l1-dcache { 67 compatible = "cache"; 68 }; 69 }; 70 71 CPU2: cpu@2 { 72 device_type = "cpu"; 73 compatible = "arm,cortex-a53"; 74 reg = <0x2>; 75 enable-method = "psci"; 76 capacity-dmips-mhz = <1024>; 77 next-level-cache = <&L2_0>; 78 #cooling-cells = <2>; 79 80 l1-icache { 81 compatible = "cache"; 82 }; 83 l1-dcache { 84 compatible = "cache"; 85 }; 86 }; 87 88 CPU3: cpu@3 { 89 device_type = "cpu"; 90 compatible = "arm,cortex-a53"; 91 reg = <0x3>; 92 enable-method = "psci"; 93 capacity-dmips-mhz = <1024>; 94 next-level-cache = <&L2_0>; 95 #cooling-cells = <2>; 96 97 l1-icache { 98 compatible = "cache"; 99 }; 100 l1-dcache { 101 compatible = "cache"; 102 }; 103 }; 104 105 CPU4: cpu@100 { 106 device_type = "cpu"; 107 compatible = "arm,cortex-a53"; 108 reg = <0x100>; 109 enable-method = "psci"; 110 capacity-dmips-mhz = <1024>; 111 next-level-cache = <&L2_1>; 112 #cooling-cells = <2>; 113 114 l1-icache { 115 compatible = "cache"; 116 }; 117 l1-dcache { 118 compatible = "cache"; 119 }; 120 }; 121 122 CPU5: cpu@101 { 123 device_type = "cpu"; 124 compatible = "arm,cortex-a53"; 125 reg = <0x101>; 126 enable-method = "psci"; 127 capacity-dmips-mhz = <1024>; 128 next-level-cache = <&L2_1>; 129 #cooling-cells = <2>; 130 131 l1-icache { 132 compatible = "cache"; 133 }; 134 l1-dcache { 135 compatible = "cache"; 136 }; 137 }; 138 139 CPU6: cpu@102 { 140 device_type = "cpu"; 141 compatible = "arm,cortex-a53"; 142 reg = <0x102>; 143 enable-method = "psci"; 144 capacity-dmips-mhz = <1024>; 145 next-level-cache = <&L2_1>; 146 #cooling-cells = <2>; 147 148 l1-icache { 149 compatible = "cache"; 150 }; 151 l1-dcache { 152 compatible = "cache"; 153 }; 154 }; 155 156 CPU7: cpu@103 { 157 device_type = "cpu"; 158 compatible = "arm,cortex-a53"; 159 reg = <0x103>; 160 enable-method = "psci"; 161 capacity-dmips-mhz = <1024>; 162 next-level-cache = <&L2_1>; 163 #cooling-cells = <2>; 164 165 l1-icache { 166 compatible = "cache"; 167 }; 168 l1-dcache { 169 compatible = "cache"; 170 }; 171 }; 172 173 cpu-map { 174 cluster0 { 175 core0 { 176 cpu = <&CPU0>; 177 }; 178 core1 { 179 cpu = <&CPU1>; 180 }; 181 core2 { 182 cpu = <&CPU2>; 183 }; 184 core3 { 185 cpu = <&CPU3>; 186 }; 187 }; 188 189 cluster1 { 190 core0 { 191 cpu = <&CPU4>; 192 }; 193 core1 { 194 cpu = <&CPU5>; 195 }; 196 core2 { 197 cpu = <&CPU6>; 198 }; 199 core3 { 200 cpu = <&CPU7>; 201 }; 202 }; 203 }; 204 205 L2_0: l2-cache_0 { 206 compatible = "cache"; 207 cache-level = <2>; 208 }; 209 210 L2_1: l2-cache_1 { 211 compatible = "cache"; 212 cache-level = <2>; 213 }; 214 }; 215 216 firmware { 217 scm: scm { 218 compatible = "qcom,scm-msm8953", "qcom,scm"; 219 clocks = <&gcc GCC_CRYPTO_CLK>, 220 <&gcc GCC_CRYPTO_AXI_CLK>, 221 <&gcc GCC_CRYPTO_AHB_CLK>; 222 clock-names = "core", "bus", "iface"; 223 #reset-cells = <1>; 224 }; 225 }; 226 227 memory { 228 device_type = "memory"; 229 /* We expect the bootloader to fill in the reg */ 230 reg = <0 0 0 0>; 231 }; 232 233 pmu { 234 compatible = "arm,cortex-a53-pmu"; 235 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 236 }; 237 238 psci { 239 compatible = "arm,psci-1.0"; 240 method = "smc"; 241 }; 242 243 reserved-memory { 244 #address-cells = <2>; 245 #size-cells = <2>; 246 ranges; 247 248 zap_shader_region: memory@81800000 { 249 compatible = "shared-dma-pool"; 250 reg = <0x0 0x81800000 0x0 0x2000>; 251 no-map; 252 }; 253 254 memory@85b00000 { 255 reg = <0x0 0x85b00000 0x0 0x800000>; 256 no-map; 257 }; 258 259 smem_mem: memory@86300000 { 260 compatible = "qcom,smem"; 261 reg = <0x0 0x86300000 0x0 0x100000>; 262 qcom,rpm-msg-ram = <&rpm_msg_ram>; 263 hwlocks = <&tcsr_mutex 3>; 264 no-map; 265 }; 266 267 memory@86400000 { 268 reg = <0x0 0x86400000 0x0 0x400000>; 269 no-map; 270 }; 271 272 mpss_mem: memory@86c00000 { 273 reg = <0x0 0x86c00000 0x0 0x6a00000>; 274 no-map; 275 }; 276 277 adsp_fw_mem: memory@8d600000 { 278 reg = <0x0 0x8d600000 0x0 0x1100000>; 279 no-map; 280 }; 281 282 wcnss_fw_mem: memory@8e700000 { 283 reg = <0x0 0x8e700000 0x0 0x700000>; 284 no-map; 285 }; 286 287 memory@90000000 { 288 reg = <0 0x90000000 0 0x1000>; 289 no-map; 290 }; 291 292 memory@90001000 { 293 reg = <0x0 0x90001000 0x0 0x13ff000>; 294 no-map; 295 }; 296 297 venus_mem: memory@91400000 { 298 reg = <0x0 0x91400000 0x0 0x700000>; 299 no-map; 300 }; 301 302 mba_mem: memory@92000000 { 303 reg = <0x0 0x92000000 0x0 0x100000>; 304 no-map; 305 }; 306 307 memory@f2d00000 { 308 compatible = "qcom,rmtfs-mem"; 309 reg = <0x0 0xf2d00000 0x0 0x180000>; 310 no-map; 311 312 qcom,client-id = <1>; 313 }; 314 }; 315 316 smd { 317 compatible = "qcom,smd"; 318 319 rpm { 320 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 321 qcom,ipc = <&apcs 8 0>; 322 qcom,smd-edge = <15>; 323 324 rpm_requests: rpm-requests { 325 compatible = "qcom,rpm-msm8953"; 326 qcom,smd-channels = "rpm_requests"; 327 328 rpmcc: rpmcc { 329 compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; 330 clocks = <&xo_board>; 331 clock-names = "xo"; 332 #clock-cells = <1>; 333 }; 334 335 rpmpd: power-controller { 336 compatible = "qcom,msm8953-rpmpd"; 337 #power-domain-cells = <1>; 338 operating-points-v2 = <&rpmpd_opp_table>; 339 340 clocks = <&xo_board>; 341 clock-names = "ref"; 342 343 rpmpd_opp_table: opp-table { 344 compatible = "operating-points-v2"; 345 346 rpmpd_opp_ret: opp1 { 347 opp-level = <RPM_SMD_LEVEL_RETENTION>; 348 }; 349 350 rpmpd_opp_ret_plus: opp2 { 351 opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; 352 }; 353 354 rpmpd_opp_min_svs: opp3 { 355 opp-level = <RPM_SMD_LEVEL_MIN_SVS>; 356 }; 357 358 rpmpd_opp_low_svs: opp4 { 359 opp-level = <RPM_SMD_LEVEL_LOW_SVS>; 360 }; 361 362 rpmpd_opp_svs: opp5 { 363 opp-level = <RPM_SMD_LEVEL_SVS>; 364 }; 365 366 rpmpd_opp_svs_plus: opp6 { 367 opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; 368 }; 369 370 rpmpd_opp_nom: opp7 { 371 opp-level = <RPM_SMD_LEVEL_NOM>; 372 }; 373 374 rpmpd_opp_nom_plus: opp8 { 375 opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; 376 }; 377 378 rpmpd_opp_turbo: opp9 { 379 opp-level = <RPM_SMD_LEVEL_TURBO>; 380 }; 381 }; 382 }; 383 }; 384 }; 385 }; 386 387 smsm { 388 compatible = "qcom,smsm"; 389 390 #address-cells = <1>; 391 #size-cells = <0>; 392 393 qcom,ipc-1 = <&apcs 8 13>; 394 qcom,ipc-3 = <&apcs 8 19>; 395 396 apps_smsm: apps@0 { 397 reg = <0>; 398 399 #qcom,smem-state-cells = <1>; 400 }; 401 }; 402 403 soc: soc@0 { 404 #address-cells = <1>; 405 #size-cells = <1>; 406 ranges = <0 0 0 0xffffffff>; 407 compatible = "simple-bus"; 408 409 rpm_msg_ram: sram@60000 { 410 compatible = "qcom,rpm-msg-ram"; 411 reg = <0x60000 0x8000>; 412 }; 413 414 hsusb_phy: phy@79000 { 415 compatible = "qcom,msm8953-qusb2-phy"; 416 reg = <0x79000 0x180>; 417 #phy-cells = <0>; 418 419 clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, 420 <&gcc GCC_QUSB_REF_CLK>; 421 clock-names = "cfg_ahb", "ref"; 422 423 qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; 424 425 resets = <&gcc GCC_QUSB2_PHY_BCR>; 426 427 status = "disabled"; 428 }; 429 430 rng@e3000 { 431 compatible = "qcom,prng"; 432 reg = <0x000e3000 0x1000>; 433 clocks = <&gcc GCC_PRNG_AHB_CLK>; 434 clock-names = "core"; 435 }; 436 437 tsens0: thermal-sensor@4a9000 { 438 compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; 439 reg = <0x4a9000 0x1000>, /* TM */ 440 <0x4a8000 0x1000>; /* SROT */ 441 #qcom,sensors = <16>; 442 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 443 <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; 444 interrupt-names = "uplow", "critical"; 445 #thermal-sensor-cells = <1>; 446 }; 447 448 restart@4ab000 { 449 compatible = "qcom,pshold"; 450 reg = <0x4ab000 0x4>; 451 }; 452 453 tlmm: pinctrl@1000000 { 454 compatible = "qcom,msm8953-pinctrl"; 455 reg = <0x1000000 0x300000>; 456 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 457 gpio-controller; 458 gpio-ranges = <&tlmm 0 0 155>; 459 #gpio-cells = <2>; 460 interrupt-controller; 461 #interrupt-cells = <2>; 462 463 uart_console_active: uart-console-active-pins { 464 pins = "gpio4", "gpio5"; 465 function = "blsp_uart2"; 466 drive-strength = <2>; 467 bias-disable; 468 }; 469 470 uart_console_sleep: uart-console-sleep-pins { 471 pins = "gpio4", "gpio5"; 472 function = "blsp_uart2"; 473 drive-strength = <2>; 474 bias-pull-down; 475 }; 476 477 sdc1_clk_on: sdc1-clk-on-pins { 478 pins = "sdc1_clk"; 479 bias-disable; 480 drive-strength = <16>; 481 }; 482 483 sdc1_clk_off: sdc1-clk-off-pins { 484 pins = "sdc1_clk"; 485 bias-disable; 486 drive-strength = <2>; 487 }; 488 489 sdc1_cmd_on: sdc1-cmd-on-pins { 490 pins = "sdc1_cmd"; 491 bias-disable; 492 drive-strength = <10>; 493 }; 494 495 sdc1_cmd_off: sdc1-cmd-off-pins { 496 pins = "sdc1_cmd"; 497 bias-disable; 498 drive-strength = <2>; 499 }; 500 501 sdc1_data_on: sdc1-data-on-pins { 502 pins = "sdc1_data"; 503 bias-pull-up; 504 drive-strength = <10>; 505 }; 506 507 sdc1_data_off: sdc1-data-off-pins { 508 pins = "sdc1_data"; 509 bias-pull-up; 510 drive-strength = <2>; 511 }; 512 513 sdc1_rclk_on: sdc1-rclk-on-pins { 514 pins = "sdc1_rclk"; 515 bias-pull-down; 516 }; 517 518 sdc1_rclk_off: sdc1-rclk-off-pins { 519 pins = "sdc1_rclk"; 520 bias-pull-down; 521 }; 522 523 sdc2_clk_on: sdc2-clk-on-pins { 524 pins = "sdc2_clk"; 525 drive-strength = <16>; 526 bias-disable; 527 }; 528 529 sdc2_clk_off: sdc2-clk-off-pins { 530 pins = "sdc2_clk"; 531 bias-disable; 532 drive-strength = <2>; 533 }; 534 535 sdc2_cmd_on: sdc2-cmd-on-pins { 536 pins = "sdc2_cmd"; 537 bias-pull-up; 538 drive-strength = <10>; 539 }; 540 541 sdc2_cmd_off: sdc2-cmd-off-pins { 542 pins = "sdc2_cmd"; 543 bias-pull-up; 544 drive-strength = <2>; 545 }; 546 547 sdc2_data_on: sdc2-data-on-pins { 548 pins = "sdc2_data"; 549 bias-pull-up; 550 drive-strength = <10>; 551 }; 552 553 sdc2_data_off: sdc2-data-off-pins { 554 pins = "sdc2_data"; 555 bias-pull-up; 556 drive-strength = <2>; 557 }; 558 559 sdc2_cd_on: cd-on-pins { 560 pins = "gpio133"; 561 function = "gpio"; 562 drive-strength = <2>; 563 bias-pull-up; 564 }; 565 566 sdc2_cd_off: cd-off-pins { 567 pins = "gpio133"; 568 function = "gpio"; 569 drive-strength = <2>; 570 bias-disable; 571 }; 572 573 gpio_key_default: gpio-key-default-pins { 574 pins = "gpio85"; 575 function = "gpio"; 576 drive-strength = <2>; 577 bias-pull-up; 578 }; 579 580 i2c_1_default: i2c-1-default-pins { 581 pins = "gpio2", "gpio3"; 582 function = "blsp_i2c1"; 583 drive-strength = <2>; 584 bias-disable; 585 }; 586 587 i2c_1_sleep: i2c-1-sleep-pins { 588 pins = "gpio2", "gpio3"; 589 function = "gpio"; 590 drive-strength = <2>; 591 bias-disable; 592 }; 593 594 i2c_2_default: i2c-2-default-pins { 595 pins = "gpio6", "gpio7"; 596 function = "blsp_i2c2"; 597 drive-strength = <2>; 598 bias-disable; 599 }; 600 601 i2c_2_sleep: i2c-2-sleep-pins { 602 pins = "gpio6", "gpio7"; 603 function = "gpio"; 604 drive-strength = <2>; 605 bias-disable; 606 }; 607 608 i2c_3_default: i2c-3-default-pins { 609 pins = "gpio10", "gpio11"; 610 function = "blsp_i2c3"; 611 drive-strength = <2>; 612 bias-disable; 613 }; 614 615 i2c_3_sleep: i2c-3-sleep-pins { 616 pins = "gpio10", "gpio11"; 617 function = "gpio"; 618 drive-strength = <2>; 619 bias-disable; 620 }; 621 622 i2c_4_default: i2c-4-default-pins { 623 pins = "gpio14", "gpio15"; 624 function = "blsp_i2c4"; 625 drive-strength = <2>; 626 bias-disable; 627 }; 628 629 i2c_4_sleep: i2c-4-sleep-pins { 630 pins = "gpio14", "gpio15"; 631 function = "gpio"; 632 drive-strength = <2>; 633 bias-disable; 634 }; 635 636 i2c_5_default: i2c-5-default-pins { 637 pins = "gpio18", "gpio19"; 638 function = "blsp_i2c5"; 639 drive-strength = <2>; 640 bias-disable; 641 }; 642 643 i2c_5_sleep: i2c-5-sleep-pins { 644 pins = "gpio18", "gpio19"; 645 function = "gpio"; 646 drive-strength = <2>; 647 bias-disable; 648 }; 649 650 i2c_6_default: i2c-6-default-pins { 651 pins = "gpio22", "gpio23"; 652 function = "blsp_i2c6"; 653 drive-strength = <2>; 654 bias-disable; 655 }; 656 657 i2c_6_sleep: i2c-6-sleep-pins { 658 pins = "gpio22", "gpio23"; 659 function = "gpio"; 660 drive-strength = <2>; 661 bias-disable; 662 }; 663 664 i2c_7_default: i2c-7-default-pins { 665 pins = "gpio135", "gpio136"; 666 function = "blsp_i2c7"; 667 drive-strength = <2>; 668 bias-disable; 669 }; 670 671 i2c_7_sleep: i2c-7-sleep-pins { 672 pins = "gpio135", "gpio136"; 673 function = "gpio"; 674 drive-strength = <2>; 675 bias-disable; 676 }; 677 678 i2c_8_default: i2c-8-default-pins { 679 pins = "gpio98", "gpio99"; 680 function = "blsp_i2c8"; 681 drive-strength = <2>; 682 bias-disable; 683 }; 684 685 i2c_8_sleep: i2c-8-sleep-pins { 686 pins = "gpio98", "gpio99"; 687 function = "gpio"; 688 drive-strength = <2>; 689 bias-disable; 690 }; 691 }; 692 693 gcc: clock-controller@1800000 { 694 compatible = "qcom,gcc-msm8953"; 695 reg = <0x1800000 0x80000>; 696 #clock-cells = <1>; 697 #reset-cells = <1>; 698 #power-domain-cells = <1>; 699 clocks = <&xo_board>, 700 <&sleep_clk>, 701 <0>, 702 <0>, 703 <0>, 704 <0>; 705 clock-names = "xo", 706 "sleep", 707 "dsi0pll", 708 "dsi0pllbyte", 709 "dsi1pll", 710 "dsi1pllbyte"; 711 }; 712 713 tcsr_mutex: hwlock@1905000 { 714 compatible = "qcom,tcsr-mutex"; 715 reg = <0x1905000 0x20000>; 716 #hwlock-cells = <1>; 717 }; 718 719 tcsr: syscon@1937000 { 720 compatible = "qcom,tcsr-msm8953", "syscon"; 721 reg = <0x1937000 0x30000>; 722 }; 723 724 tcsr_phy_clk_scheme_sel: syscon@193f044 { 725 compatible = "qcom,tcsr-msm8953", "syscon"; 726 reg = <0x193f044 0x4>; 727 }; 728 729 spmi_bus: spmi@200f000 { 730 compatible = "qcom,spmi-pmic-arb"; 731 reg = <0x200f000 0x1000>, 732 <0x2400000 0x800000>, 733 <0x2c00000 0x800000>, 734 <0x3800000 0x200000>, 735 <0x200a000 0x2100>; 736 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 737 interrupt-names = "periph_irq"; 738 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 739 qcom,ee = <0>; 740 qcom,channel = <0>; 741 interrupt-controller; 742 743 #interrupt-cells = <4>; 744 #address-cells = <2>; 745 #size-cells = <0>; 746 }; 747 748 usb3: usb@70f8800 { 749 compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; 750 reg = <0x70f8800 0x400>; 751 #address-cells = <1>; 752 #size-cells = <1>; 753 ranges; 754 755 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 756 <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 757 interrupt-names = "hs_phy_irq", "ss_phy_irq"; 758 759 clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, 760 <&gcc GCC_USB30_MASTER_CLK>, 761 <&gcc GCC_PCNOC_USB3_AXI_CLK>, 762 <&gcc GCC_USB30_SLEEP_CLK>, 763 <&gcc GCC_USB30_MOCK_UTMI_CLK>; 764 clock-names = "cfg_noc", 765 "core", 766 "iface", 767 "sleep", 768 "mock_utmi"; 769 770 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, 771 <&gcc GCC_USB30_MASTER_CLK>; 772 assigned-clock-rates = <19200000>, <133330000>; 773 774 power-domains = <&gcc USB30_GDSC>; 775 776 qcom,select-utmi-as-pipe-clk; 777 778 status = "disabled"; 779 780 usb3_dwc3: usb@7000000 { 781 compatible = "snps,dwc3"; 782 reg = <0x07000000 0xcc00>; 783 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 784 phys = <&hsusb_phy>; 785 phy-names = "usb2-phy"; 786 787 snps,usb2-gadget-lpm-disable; 788 snps,dis-u1-entry-quirk; 789 snps,dis-u2-entry-quirk; 790 snps,is-utmi-l1-suspend; 791 snps,hird-threshold = /bits/ 8 <0x00>; 792 793 maximum-speed = "high-speed"; 794 phy_mode = "utmi"; 795 }; 796 }; 797 798 sdhc_1: mmc@7824900 { 799 compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; 800 801 reg = <0x7824900 0x500>, <0x7824000 0x800>; 802 reg-names = "hc", "core"; 803 804 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 805 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 806 interrupt-names = "hc_irq", "pwr_irq"; 807 808 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 809 <&gcc GCC_SDCC1_APPS_CLK>, 810 <&xo_board>; 811 clock-names = "iface", "core", "xo"; 812 813 power-domains = <&rpmpd MSM8953_VDDCX>; 814 operating-points-v2 = <&sdhc1_opp_table>; 815 816 pinctrl-names = "default", "sleep"; 817 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; 818 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; 819 820 mmc-hs400-1_8v; 821 mmc-hs200-1_8v; 822 mmc-ddr-1_8v; 823 bus-width = <8>; 824 non-removable; 825 826 status = "disabled"; 827 828 sdhc1_opp_table: opp-table-sdhc1 { 829 compatible = "operating-points-v2"; 830 831 opp-25000000 { 832 opp-hz = /bits/ 64 <25000000>; 833 required-opps = <&rpmpd_opp_low_svs>; 834 }; 835 836 opp-50000000 { 837 opp-hz = /bits/ 64 <50000000>; 838 required-opps = <&rpmpd_opp_svs>; 839 }; 840 841 opp-100000000 { 842 opp-hz = /bits/ 64 <100000000>; 843 required-opps = <&rpmpd_opp_svs>; 844 }; 845 846 opp-192000000 { 847 opp-hz = /bits/ 64 <192000000>; 848 required-opps = <&rpmpd_opp_nom>; 849 }; 850 851 opp-384000000 { 852 opp-hz = /bits/ 64 <384000000>; 853 required-opps = <&rpmpd_opp_nom>; 854 }; 855 }; 856 }; 857 858 sdhc_2: mmc@7864900 { 859 compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; 860 861 reg = <0x7864900 0x500>, <0x7864000 0x800>; 862 reg-names = "hc", "core"; 863 864 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 865 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 866 interrupt-names = "hc_irq", "pwr_irq"; 867 868 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 869 <&gcc GCC_SDCC2_APPS_CLK>, 870 <&xo_board>; 871 clock-names = "iface", "core", "xo"; 872 873 power-domains = <&rpmpd MSM8953_VDDCX>; 874 operating-points-v2 = <&sdhc2_opp_table>; 875 876 pinctrl-names = "default", "sleep"; 877 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; 878 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; 879 880 bus-width = <4>; 881 882 status = "disabled"; 883 884 sdhc2_opp_table: opp-table-sdhc2 { 885 compatible = "operating-points-v2"; 886 887 opp-25000000 { 888 opp-hz = /bits/ 64 <25000000>; 889 required-opps = <&rpmpd_opp_low_svs>; 890 }; 891 892 opp-50000000 { 893 opp-hz = /bits/ 64 <50000000>; 894 required-opps = <&rpmpd_opp_svs>; 895 }; 896 897 opp-100000000 { 898 opp-hz = /bits/ 64 <100000000>; 899 required-opps = <&rpmpd_opp_svs>; 900 }; 901 902 opp-177770000 { 903 opp-hz = /bits/ 64 <177770000>; 904 required-opps = <&rpmpd_opp_nom>; 905 }; 906 907 opp-200000000 { 908 opp-hz = /bits/ 64 <200000000>; 909 required-opps = <&rpmpd_opp_nom>; 910 }; 911 }; 912 }; 913 914 uart_0: serial@78af000 { 915 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 916 reg = <0x78af000 0x200>; 917 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 918 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 919 <&gcc GCC_BLSP1_AHB_CLK>; 920 clock-names = "core", "iface"; 921 922 status = "disabled"; 923 }; 924 925 i2c_1: i2c@78b5000 { 926 compatible = "qcom,i2c-qup-v2.2.1"; 927 reg = <0x78b5000 0x600>; 928 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 929 clock-names = "core", "iface"; 930 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, 931 <&gcc GCC_BLSP1_AHB_CLK>; 932 933 pinctrl-names = "default", "sleep"; 934 pinctrl-0 = <&i2c_1_default>; 935 pinctrl-1 = <&i2c_1_sleep>; 936 937 #address-cells = <1>; 938 #size-cells = <0>; 939 940 status = "disabled"; 941 }; 942 943 i2c_2: i2c@78b6000 { 944 compatible = "qcom,i2c-qup-v2.2.1"; 945 reg = <0x78b6000 0x600>; 946 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 947 clock-names = "core", "iface"; 948 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 949 <&gcc GCC_BLSP1_AHB_CLK>; 950 951 pinctrl-names = "default", "sleep"; 952 pinctrl-0 = <&i2c_2_default>; 953 pinctrl-1 = <&i2c_2_sleep>; 954 955 #address-cells = <1>; 956 #size-cells = <0>; 957 958 status = "disabled"; 959 }; 960 961 i2c_3: i2c@78b7000 { 962 compatible = "qcom,i2c-qup-v2.2.1"; 963 reg = <0x78b7000 0x600>; 964 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 965 clock-names = "core", "iface"; 966 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 967 <&gcc GCC_BLSP1_AHB_CLK>; 968 pinctrl-names = "default", "sleep"; 969 pinctrl-0 = <&i2c_3_default>; 970 pinctrl-1 = <&i2c_3_sleep>; 971 972 #address-cells = <1>; 973 #size-cells = <0>; 974 975 status = "disabled"; 976 }; 977 978 i2c_4: i2c@78b8000 { 979 compatible = "qcom,i2c-qup-v2.2.1"; 980 reg = <0x78b8000 0x600>; 981 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 982 clock-names = "core", "iface"; 983 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, 984 <&gcc GCC_BLSP1_AHB_CLK>; 985 pinctrl-names = "default", "sleep"; 986 pinctrl-0 = <&i2c_4_default>; 987 pinctrl-1 = <&i2c_4_sleep>; 988 989 #address-cells = <1>; 990 #size-cells = <0>; 991 992 status = "disabled"; 993 }; 994 995 i2c_5: i2c@7af5000 { 996 compatible = "qcom,i2c-qup-v2.2.1"; 997 reg = <0x7af5000 0x600>; 998 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 999 clock-names = "core", "iface"; 1000 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, 1001 <&gcc GCC_BLSP2_AHB_CLK>; 1002 pinctrl-names = "default", "sleep"; 1003 pinctrl-0 = <&i2c_5_default>; 1004 pinctrl-1 = <&i2c_5_sleep>; 1005 1006 #address-cells = <1>; 1007 #size-cells = <0>; 1008 1009 status = "disabled"; 1010 }; 1011 1012 i2c_6: i2c@7af6000 { 1013 compatible = "qcom,i2c-qup-v2.2.1"; 1014 reg = <0x7af6000 0x600>; 1015 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 1016 clock-names = "core", "iface"; 1017 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, 1018 <&gcc GCC_BLSP2_AHB_CLK>; 1019 pinctrl-names = "default", "sleep"; 1020 pinctrl-0 = <&i2c_6_default>; 1021 pinctrl-1 = <&i2c_6_sleep>; 1022 1023 #address-cells = <1>; 1024 #size-cells = <0>; 1025 1026 status = "disabled"; 1027 }; 1028 1029 i2c_7: i2c@7af7000 { 1030 compatible = "qcom,i2c-qup-v2.2.1"; 1031 reg = <0x7af7000 0x600>; 1032 interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; 1033 clock-names = "core", "iface"; 1034 clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, 1035 <&gcc GCC_BLSP2_AHB_CLK>; 1036 pinctrl-names = "default", "sleep"; 1037 pinctrl-0 = <&i2c_7_default>; 1038 pinctrl-1 = <&i2c_7_sleep>; 1039 1040 #address-cells = <1>; 1041 #size-cells = <0>; 1042 1043 status = "disabled"; 1044 }; 1045 1046 i2c_8: i2c@7af8000 { 1047 compatible = "qcom,i2c-qup-v2.2.1"; 1048 reg = <0x7af8000 0x600>; 1049 interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; 1050 clock-names = "core", "iface"; 1051 clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, 1052 <&gcc GCC_BLSP2_AHB_CLK>; 1053 pinctrl-names = "default", "sleep"; 1054 pinctrl-0 = <&i2c_8_default>; 1055 pinctrl-1 = <&i2c_8_sleep>; 1056 1057 #address-cells = <1>; 1058 #size-cells = <0>; 1059 1060 status = "disabled"; 1061 }; 1062 1063 intc: interrupt-controller@b000000 { 1064 compatible = "qcom,msm-qgic2"; 1065 interrupt-controller; 1066 #interrupt-cells = <3>; 1067 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 1068 }; 1069 1070 apcs: mailbox@b011000 { 1071 compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; 1072 reg = <0xb011000 0x1000>; 1073 #mbox-cells = <1>; 1074 }; 1075 1076 timer@b120000 { 1077 compatible = "arm,armv7-timer-mem"; 1078 reg = <0xb120000 0x1000>; 1079 #address-cells = <0x01>; 1080 #size-cells = <0x01>; 1081 ranges; 1082 1083 frame@b121000 { 1084 frame-number = <0>; 1085 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1086 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1087 reg = <0xb121000 0x1000>, 1088 <0xb122000 0x1000>; 1089 }; 1090 1091 frame@b123000 { 1092 frame-number = <1>; 1093 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1094 reg = <0xb123000 0x1000>; 1095 status = "disabled"; 1096 }; 1097 1098 frame@b124000 { 1099 frame-number = <2>; 1100 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1101 reg = <0xb124000 0x1000>; 1102 status = "disabled"; 1103 }; 1104 1105 frame@b125000 { 1106 frame-number = <3>; 1107 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1108 reg = <0xb125000 0x1000>; 1109 status = "disabled"; 1110 }; 1111 1112 frame@b126000 { 1113 frame-number = <4>; 1114 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1115 reg = <0xb126000 0x1000>; 1116 status = "disabled"; 1117 }; 1118 1119 frame@b127000 { 1120 frame-number = <5>; 1121 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1122 reg = <0xb127000 0x1000>; 1123 status = "disabled"; 1124 }; 1125 1126 frame@b128000 { 1127 frame-number = <6>; 1128 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1129 reg = <0xb128000 0x1000>; 1130 status = "disabled"; 1131 }; 1132 }; 1133 }; 1134 1135 thermal-zones { 1136 cpu0-thermal { 1137 polling-delay-passive = <250>; 1138 polling-delay = <1000>; 1139 thermal-sensors = <&tsens0 9>; 1140 trips { 1141 cpu0_alert: trip-point0 { 1142 temperature = <80000>; 1143 hysteresis = <2000>; 1144 type = "passive"; 1145 }; 1146 cpu0_crit: crit { 1147 temperature = <100000>; 1148 hysteresis = <2000>; 1149 type = "critical"; 1150 }; 1151 }; 1152 cooling-maps { 1153 map0 { 1154 trip = <&cpu0_alert>; 1155 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1156 }; 1157 }; 1158 }; 1159 cpu1-thermal { 1160 polling-delay-passive = <250>; 1161 polling-delay = <1000>; 1162 thermal-sensors = <&tsens0 10>; 1163 trips { 1164 cpu1_alert: trip-point0 { 1165 temperature = <80000>; 1166 hysteresis = <2000>; 1167 type = "passive"; 1168 }; 1169 cpu1_crit: crit { 1170 temperature = <100000>; 1171 hysteresis = <2000>; 1172 type = "critical"; 1173 }; 1174 }; 1175 cooling-maps { 1176 map0 { 1177 trip = <&cpu1_alert>; 1178 cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1179 }; 1180 }; 1181 }; 1182 cpu2-thermal { 1183 polling-delay-passive = <250>; 1184 polling-delay = <1000>; 1185 thermal-sensors = <&tsens0 11>; 1186 trips { 1187 cpu2_alert: trip-point0 { 1188 temperature = <80000>; 1189 hysteresis = <2000>; 1190 type = "passive"; 1191 }; 1192 cpu2_crit: crit { 1193 temperature = <100000>; 1194 hysteresis = <2000>; 1195 type = "critical"; 1196 }; 1197 }; 1198 cooling-maps { 1199 map0 { 1200 trip = <&cpu2_alert>; 1201 cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1202 }; 1203 }; 1204 }; 1205 cpu3-thermal { 1206 polling-delay-passive = <250>; 1207 polling-delay = <1000>; 1208 thermal-sensors = <&tsens0 12>; 1209 trips { 1210 cpu3_alert: trip-point0 { 1211 temperature = <80000>; 1212 hysteresis = <2000>; 1213 type = "passive"; 1214 }; 1215 cpu3_crit: crit { 1216 temperature = <100000>; 1217 hysteresis = <2000>; 1218 type = "critical"; 1219 }; 1220 }; 1221 cooling-maps { 1222 map0 { 1223 trip = <&cpu3_alert>; 1224 cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1225 }; 1226 }; 1227 }; 1228 cpu4-thermal { 1229 polling-delay-passive = <250>; 1230 polling-delay = <1000>; 1231 thermal-sensors = <&tsens0 4>; 1232 trips { 1233 cpu4_alert: trip-point0 { 1234 temperature = <80000>; 1235 hysteresis = <2000>; 1236 type = "passive"; 1237 }; 1238 cpu4_crit: crit { 1239 temperature = <100000>; 1240 hysteresis = <2000>; 1241 type = "critical"; 1242 }; 1243 }; 1244 cooling-maps { 1245 map0 { 1246 trip = <&cpu4_alert>; 1247 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1248 }; 1249 }; 1250 }; 1251 cpu5-thermal { 1252 polling-delay-passive = <250>; 1253 polling-delay = <1000>; 1254 thermal-sensors = <&tsens0 5>; 1255 trips { 1256 cpu5_alert: trip-point0 { 1257 temperature = <80000>; 1258 hysteresis = <2000>; 1259 type = "passive"; 1260 }; 1261 cpu5_crit: crit { 1262 temperature = <100000>; 1263 hysteresis = <2000>; 1264 type = "critical"; 1265 }; 1266 }; 1267 cooling-maps { 1268 map0 { 1269 trip = <&cpu5_alert>; 1270 cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1271 }; 1272 }; 1273 }; 1274 cpu6-thermal { 1275 polling-delay-passive = <250>; 1276 polling-delay = <1000>; 1277 thermal-sensors = <&tsens0 6>; 1278 trips { 1279 cpu6_alert: trip-point0 { 1280 temperature = <80000>; 1281 hysteresis = <2000>; 1282 type = "passive"; 1283 }; 1284 cpu6_crit: crit { 1285 temperature = <100000>; 1286 hysteresis = <2000>; 1287 type = "critical"; 1288 }; 1289 }; 1290 cooling-maps { 1291 map0 { 1292 trip = <&cpu6_alert>; 1293 cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1294 }; 1295 }; 1296 }; 1297 cpu7-thermal { 1298 polling-delay-passive = <250>; 1299 polling-delay = <1000>; 1300 thermal-sensors = <&tsens0 7>; 1301 trips { 1302 cpu7_alert: trip-point0 { 1303 temperature = <80000>; 1304 hysteresis = <2000>; 1305 type = "passive"; 1306 }; 1307 cpu7_crit: crit { 1308 temperature = <100000>; 1309 hysteresis = <2000>; 1310 type = "critical"; 1311 }; 1312 }; 1313 cooling-maps { 1314 map0 { 1315 trip = <&cpu7_alert>; 1316 cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1317 }; 1318 }; 1319 }; 1320 }; 1321 1322 timer { 1323 compatible = "arm,armv8-timer"; 1324 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 1325 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 1326 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 1327 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 1328 }; 1329}; 1330