xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8939.dtsi (revision a325f174)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
5 */
6
7#include <dt-bindings/clock/qcom,gcc-msm8939.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/interconnect/qcom,msm8939.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/power/qcom-rpmpd.h>
12#include <dt-bindings/reset/qcom,gcc-msm8939.h>
13#include <dt-bindings/thermal/thermal.h>
14
15/ {
16	interrupt-parent = <&intc>;
17
18	/*
19	 * Stock LK wants address-cells/size-cells = 2
20	 * A number of our drivers want address/size cells = 1
21	 * hence the disparity between top-level and /soc below.
22	 */
23	#address-cells = <2>;
24	#size-cells = <2>;
25
26	clocks {
27		xo_board: xo-board {
28			compatible = "fixed-clock";
29			#clock-cells = <0>;
30			clock-frequency = <19200000>;
31		};
32
33		sleep_clk: sleep-clk {
34			compatible = "fixed-clock";
35			#clock-cells = <0>;
36			clock-frequency = <32768>;
37		};
38	};
39
40	cpus {
41		#address-cells = <1>;
42		#size-cells = <0>;
43
44		CPU0: cpu@100 {
45			compatible = "arm,cortex-a53";
46			device_type = "cpu";
47			enable-method = "spin-table";
48			reg = <0x100>;
49			next-level-cache = <&L2_1>;
50			qcom,acc = <&acc0>;
51			qcom,saw = <&saw0>;
52			cpu-idle-states = <&CPU_SLEEP_0>;
53			clocks = <&apcs1_mbox>;
54			#cooling-cells = <2>;
55			L2_1: l2-cache {
56				compatible = "cache";
57				cache-level = <2>;
58				cache-unified;
59			};
60		};
61
62		CPU1: cpu@101 {
63			compatible = "arm,cortex-a53";
64			device_type = "cpu";
65			enable-method = "spin-table";
66			reg = <0x101>;
67			next-level-cache = <&L2_1>;
68			qcom,acc = <&acc1>;
69			qcom,saw = <&saw1>;
70			cpu-idle-states = <&CPU_SLEEP_0>;
71			clocks = <&apcs1_mbox>;
72			#cooling-cells = <2>;
73		};
74
75		CPU2: cpu@102 {
76			compatible = "arm,cortex-a53";
77			device_type = "cpu";
78			enable-method = "spin-table";
79			reg = <0x102>;
80			next-level-cache = <&L2_1>;
81			qcom,acc = <&acc2>;
82			qcom,saw = <&saw2>;
83			cpu-idle-states = <&CPU_SLEEP_0>;
84			clocks = <&apcs1_mbox>;
85			#cooling-cells = <2>;
86		};
87
88		CPU3: cpu@103 {
89			compatible = "arm,cortex-a53";
90			device_type = "cpu";
91			enable-method = "spin-table";
92			reg = <0x103>;
93			next-level-cache = <&L2_1>;
94			qcom,acc = <&acc3>;
95			qcom,saw = <&saw3>;
96			cpu-idle-states = <&CPU_SLEEP_0>;
97			clocks = <&apcs1_mbox>;
98			#cooling-cells = <2>;
99		};
100
101		CPU4: cpu@0 {
102			compatible = "arm,cortex-a53";
103			device_type = "cpu";
104			enable-method = "spin-table";
105			reg = <0x0>;
106			qcom,acc = <&acc4>;
107			qcom,saw = <&saw4>;
108			cpu-idle-states = <&CPU_SLEEP_0>;
109			clocks = <&apcs0_mbox>;
110			#cooling-cells = <2>;
111			next-level-cache = <&L2_0>;
112			L2_0: l2-cache {
113				compatible = "cache";
114				cache-level = <2>;
115				cache-unified;
116			};
117		};
118
119		CPU5: cpu@1 {
120			compatible = "arm,cortex-a53";
121			device_type = "cpu";
122			enable-method = "spin-table";
123			reg = <0x1>;
124			next-level-cache = <&L2_0>;
125			qcom,acc = <&acc5>;
126			qcom,saw = <&saw5>;
127			cpu-idle-states = <&CPU_SLEEP_0>;
128			clocks = <&apcs0_mbox>;
129			#cooling-cells = <2>;
130		};
131
132		CPU6: cpu@2 {
133			compatible = "arm,cortex-a53";
134			device_type = "cpu";
135			enable-method = "spin-table";
136			reg = <0x2>;
137			next-level-cache = <&L2_0>;
138			qcom,acc = <&acc6>;
139			qcom,saw = <&saw6>;
140			cpu-idle-states = <&CPU_SLEEP_0>;
141			clocks = <&apcs0_mbox>;
142			#cooling-cells = <2>;
143		};
144
145		CPU7: cpu@3 {
146			compatible = "arm,cortex-a53";
147			device_type = "cpu";
148			enable-method = "spin-table";
149			reg = <0x3>;
150			next-level-cache = <&L2_0>;
151			qcom,acc = <&acc7>;
152			qcom,saw = <&saw7>;
153			cpu-idle-states = <&CPU_SLEEP_0>;
154			clocks = <&apcs0_mbox>;
155			#cooling-cells = <2>;
156		};
157
158		idle-states {
159			CPU_SLEEP_0: cpu-sleep-0 {
160				compatible = "arm,idle-state";
161				entry-latency-us = <130>;
162				exit-latency-us = <150>;
163				min-residency-us = <2000>;
164				local-timer-stop;
165			};
166		};
167	};
168
169	/*
170	 * MSM8939 has a big.LITTLE heterogeneous computing architecture,
171	 * consisting of two clusters of four ARM Cortex-A53s each. The
172	 * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs
173	 * at 1.5-1.7GHz.
174	 *
175	 * The enable method used here is spin-table which presupposes use
176	 * of a 2nd stage boot shim such as lk2nd to have installed a
177	 * spin-table, the downstream non-psci/non-spin-table method that
178	 * default msm8916/msm8936/msm8939 will not be supported upstream.
179	 */
180	cpu-map {
181		/* LITTLE (efficiency) cluster */
182		cluster0 {
183			core0 {
184				cpu = <&CPU4>;
185			};
186
187			core1 {
188				cpu = <&CPU5>;
189			};
190
191			core2 {
192				cpu = <&CPU6>;
193			};
194
195			core3 {
196				cpu = <&CPU7>;
197			};
198		};
199
200		/* big (performance) cluster */
201		/* Boot CPU is cluster 1 core 0 */
202		cluster1 {
203			core0 {
204				cpu = <&CPU0>;
205			};
206
207			core1 {
208				cpu = <&CPU1>;
209			};
210
211			core2 {
212				cpu = <&CPU2>;
213			};
214
215			core3 {
216				cpu = <&CPU3>;
217			};
218		};
219	};
220
221	firmware {
222		scm: scm {
223			compatible = "qcom,scm-msm8916", "qcom,scm";
224			clocks = <&gcc GCC_CRYPTO_CLK>,
225				 <&gcc GCC_CRYPTO_AXI_CLK>,
226				 <&gcc GCC_CRYPTO_AHB_CLK>;
227			clock-names = "core", "bus", "iface";
228			#reset-cells = <1>;
229
230			qcom,dload-mode = <&tcsr 0x6100>;
231		};
232	};
233
234	memory@80000000 {
235		device_type = "memory";
236		/* We expect the bootloader to fill in the reg */
237		reg = <0x0 0x80000000 0x0 0x0>;
238	};
239
240	pmu {
241		compatible = "arm,cortex-a53-pmu";
242		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
243	};
244
245	rpm: remoteproc {
246		compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
247
248		smd-edge {
249			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
250			qcom,ipc = <&apcs1_mbox 8 0>;
251			qcom,smd-edge = <15>;
252
253			rpm_requests: rpm-requests {
254				compatible = "qcom,rpm-msm8936";
255				qcom,smd-channels = "rpm_requests";
256
257				rpmcc: clock-controller {
258					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
259					#clock-cells = <1>;
260					clock-names = "xo";
261					clocks = <&xo_board>;
262				};
263
264				rpmpd: power-controller {
265					compatible = "qcom,msm8939-rpmpd";
266					#power-domain-cells = <1>;
267					operating-points-v2 = <&rpmpd_opp_table>;
268
269					rpmpd_opp_table: opp-table {
270						compatible = "operating-points-v2";
271
272						rpmpd_opp_ret: opp1 {
273							opp-level = <1>;
274						};
275
276						rpmpd_opp_svs_krait: opp2 {
277							opp-level = <2>;
278						};
279
280						rpmpd_opp_svs_soc: opp3 {
281							opp-level = <3>;
282						};
283
284						rpmpd_opp_nom: opp4 {
285							opp-level = <4>;
286						};
287
288						rpmpd_opp_turbo: opp5 {
289							opp-level = <5>;
290						};
291
292						rpmpd_opp_super_turbo: opp6 {
293							opp-level = <6>;
294						};
295					};
296				};
297			};
298		};
299	};
300
301	reserved-memory {
302		#address-cells = <2>;
303		#size-cells = <2>;
304		ranges;
305
306		tz-apps@86000000 {
307			reg = <0x0 0x86000000 0x0 0x300000>;
308			no-map;
309		};
310
311		smem@86300000 {
312			compatible = "qcom,smem";
313			reg = <0x0 0x86300000 0x0 0x100000>;
314			no-map;
315
316			hwlocks = <&tcsr_mutex 3>;
317			qcom,rpm-msg-ram = <&rpm_msg_ram>;
318		};
319
320		hypervisor@86400000 {
321			reg = <0x0 0x86400000 0x0 0x100000>;
322			no-map;
323		};
324
325		tz@86500000 {
326			reg = <0x0 0x86500000 0x0 0x180000>;
327			no-map;
328		};
329
330		reserved@86680000 {
331			reg = <0x0 0x86680000 0x0 0x80000>;
332			no-map;
333		};
334
335		rmtfs@86700000 {
336			compatible = "qcom,rmtfs-mem";
337			reg = <0x0 0x86700000 0x0 0xe0000>;
338			no-map;
339
340			qcom,client-id = <1>;
341		};
342
343		rfsa@867e0000 {
344			reg = <0x0 0x867e0000 0x0 0x20000>;
345			no-map;
346		};
347
348		mpss_mem: mpss@86800000 {
349			reg = <0x0 0x86800000 0x0 0x5500000>;
350			no-map;
351		};
352
353		wcnss_mem: wcnss@8bd00000 {
354			reg = <0x0 0x8bd00000 0x0 0x600000>;
355			no-map;
356		};
357
358		venus_mem: venus@8c300000 {
359			reg = <0x0 0x8c300000 0x0 0x800000>;
360			no-map;
361		};
362
363		mba_mem: mba@8cb00000 {
364			reg = <0x0 0x8cb00000 0x0 0x100000>;
365			no-map;
366		};
367	};
368
369	smp2p-hexagon {
370		compatible = "qcom,smp2p";
371		qcom,smem = <435>, <428>;
372
373		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
374
375		mboxes = <&apcs1_mbox 14>;
376
377		qcom,local-pid = <0>;
378		qcom,remote-pid = <1>;
379
380		hexagon_smp2p_out: master-kernel {
381			qcom,entry-name = "master-kernel";
382
383			#qcom,smem-state-cells = <1>;
384		};
385
386		hexagon_smp2p_in: slave-kernel {
387			qcom,entry-name = "slave-kernel";
388
389			interrupt-controller;
390			#interrupt-cells = <2>;
391		};
392	};
393
394	smp2p-wcnss {
395		compatible = "qcom,smp2p";
396		qcom,smem = <451>, <431>;
397
398		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
399
400		mboxes = <&apcs1_mbox 18>;
401
402		qcom,local-pid = <0>;
403		qcom,remote-pid = <4>;
404
405		wcnss_smp2p_in: slave-kernel {
406			qcom,entry-name = "slave-kernel";
407
408			interrupt-controller;
409			#interrupt-cells = <2>;
410		};
411
412		wcnss_smp2p_out: master-kernel {
413			qcom,entry-name = "master-kernel";
414
415			#qcom,smem-state-cells = <1>;
416		};
417	};
418
419	smsm {
420		compatible = "qcom,smsm";
421
422		#address-cells = <1>;
423		#size-cells = <0>;
424
425		qcom,ipc-1 = <&apcs1_mbox 8 13>;
426		qcom,ipc-3 = <&apcs1_mbox 8 19>;
427
428		apps_smsm: apps@0 {
429			reg = <0>;
430
431			#qcom,smem-state-cells = <1>;
432		};
433
434		hexagon_smsm: hexagon@1 {
435			reg = <1>;
436			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
437
438			interrupt-controller;
439			#interrupt-cells = <2>;
440		};
441
442		wcnss_smsm: wcnss@6 {
443			reg = <6>;
444			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
445
446			interrupt-controller;
447			#interrupt-cells = <2>;
448		};
449	};
450
451	soc: soc@0 {
452		compatible = "simple-bus";
453		#address-cells = <1>;
454		#size-cells = <1>;
455		ranges = <0 0 0 0xffffffff>;
456
457		rng@22000 {
458			compatible = "qcom,prng";
459			reg = <0x00022000 0x200>;
460			clocks = <&gcc GCC_PRNG_AHB_CLK>;
461			clock-names = "core";
462		};
463
464		qfprom: qfprom@5c000 {
465			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
466			reg = <0x0005c000 0x1000>;
467			#address-cells = <1>;
468			#size-cells = <1>;
469
470			tsens_base1: base1@a0 {
471				reg = <0xa0 0x1>;
472				bits = <0 8>;
473			};
474
475			tsens_s6_p1: s6-p1@a1 {
476				reg = <0xa1 0x1>;
477				bits = <0 6>;
478			};
479
480			tsens_s6_p2: s6-p2@a1 {
481				reg = <0xa1 0x2>;
482				bits = <6 6>;
483			};
484
485			tsens_s7_p1: s7-p1@a2 {
486				reg = <0xa2 0x2>;
487				bits = <4 6>;
488			};
489
490			tsens_s7_p2: s7-p2@a3 {
491				reg = <0xa3 0x1>;
492				bits = <2 6>;
493			};
494
495			tsens_s8_p1: s8-p1@a4 {
496				reg = <0xa4 0x1>;
497				bits = <0 6>;
498			};
499
500			tsens_s8_p2: s8-p2@a4 {
501				reg = <0xa4 0x2>;
502				bits = <6 6>;
503			};
504
505			tsens_s9_p1: s9-p1@a5 {
506				reg = <0xa5 0x2>;
507				bits = <4 6>;
508			};
509
510			tsens_s9_p2: s9-p2@a6 {
511				reg = <0xa6 0x1>;
512				bits = <2 6>;
513			};
514
515			tsens_base2: base2@a7 {
516				reg = <0xa7 0x1>;
517				bits = <0 8>;
518			};
519
520			tsens_mode: mode@d0 {
521				reg = <0xd0 0x1>;
522				bits = <0 3>;
523			};
524
525			tsens_s0_p1: s0-p1@d0 {
526				reg = <0xd0 0x2>;
527				bits = <3 6>;
528			};
529
530			tsens_s0_p2: s0-p1@d1 {
531				reg = <0xd1 0x1>;
532				bits = <1 6>;
533			};
534
535			tsens_s1_p1: s1-p1@d1 {
536				reg = <0xd1 0x2>;
537				bits = <7 6>;
538			};
539
540			tsens_s1_p2: s1-p2@d2 {
541				reg = <0xd2 0x2>;
542				bits = <5 6>;
543			};
544
545			tsens_s2_p1: s2-p1@d3 {
546				reg = <0xd3 0x2>;
547				bits = <3 6>;
548			};
549
550			tsens_s2_p2: s2-p2@d4 {
551				reg = <0xd4 0x1>;
552				bits = <1 6>;
553			};
554
555			tsens_s3_p1: s3-p1@d4 {
556				reg = <0xd4 0x2>;
557				bits = <7 6>;
558			};
559
560			tsens_s3_p2: s3-p2@d5 {
561				reg = <0xd5 0x2>;
562				bits = <5 6>;
563			};
564
565			tsens_s5_p1: s5-p1@d6 {
566				reg = <0xd6 0x2>;
567				bits = <3 6>;
568			};
569
570			tsens_s5_p2: s5-p2@d7 {
571				reg = <0xd7 0x1>;
572				bits = <1 6>;
573			};
574		};
575
576		rpm_msg_ram: sram@60000 {
577			compatible = "qcom,rpm-msg-ram";
578			reg = <0x00060000 0x8000>;
579		};
580
581		bimc: interconnect@400000 {
582			compatible = "qcom,msm8939-bimc";
583			reg = <0x00400000 0x62000>;
584			clock-names = "bus", "bus_a";
585			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
586				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
587			#interconnect-cells = <1>;
588		};
589
590		tsens: thermal-sensor@4a9000 {
591			compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1";
592			reg = <0x004a9000 0x1000>, /* TM */
593			      <0x004a8000 0x1000>; /* SROT */
594			nvmem-cells = <&tsens_mode>,
595				      <&tsens_base1>, <&tsens_base2>,
596				      <&tsens_s0_p1>, <&tsens_s0_p2>,
597				      <&tsens_s1_p1>, <&tsens_s1_p2>,
598				      <&tsens_s2_p1>, <&tsens_s2_p2>,
599				      <&tsens_s3_p1>, <&tsens_s3_p2>,
600				      <&tsens_s5_p1>, <&tsens_s5_p2>,
601				      <&tsens_s6_p1>, <&tsens_s6_p2>,
602				      <&tsens_s7_p1>, <&tsens_s7_p2>,
603				      <&tsens_s8_p1>, <&tsens_s8_p2>,
604				      <&tsens_s9_p1>, <&tsens_s9_p2>;
605			nvmem-cell-names = "mode",
606					   "base1", "base2",
607					   "s0_p1", "s0_p2",
608					   "s1_p1", "s1_p2",
609					   "s2_p1", "s2_p2",
610					   "s3_p1", "s3_p2",
611					   "s5_p1", "s5_p2",
612					   "s6_p1", "s6_p2",
613					   "s7_p1", "s7_p2",
614					   "s8_p1", "s8_p2",
615					   "s9_p1", "s9_p2";
616			#qcom,sensors = <9>;
617			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
618			interrupt-names = "uplow";
619			#thermal-sensor-cells = <1>;
620		};
621
622		restart@4ab000 {
623			compatible = "qcom,pshold";
624			reg = <0x004ab000 0x4>;
625		};
626
627		pcnoc: interconnect@500000 {
628			compatible = "qcom,msm8939-pcnoc";
629			reg = <0x00500000 0x11000>;
630			clock-names = "bus", "bus_a";
631			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
632				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
633			#interconnect-cells = <1>;
634		};
635
636		snoc: interconnect@580000 {
637			compatible = "qcom,msm8939-snoc";
638			reg = <0x00580000 0x14080>;
639			clock-names = "bus", "bus_a";
640			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
641				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
642			#interconnect-cells = <1>;
643
644			snoc_mm: interconnect-snoc {
645				compatible = "qcom,msm8939-snoc-mm";
646				clock-names = "bus", "bus_a";
647				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
648					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
649				#interconnect-cells = <1>;
650			};
651		};
652
653		tlmm: pinctrl@1000000 {
654			compatible = "qcom,msm8916-pinctrl";
655			reg = <0x01000000 0x300000>;
656			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
657			gpio-controller;
658			gpio-ranges = <&tlmm 0 0 122>;
659			#gpio-cells = <2>;
660			interrupt-controller;
661			#interrupt-cells = <2>;
662
663			blsp_i2c1_default: blsp-i2c1-default-state {
664				pins = "gpio2", "gpio3";
665				function = "blsp_i2c1";
666				drive-strength = <2>;
667				bias-disable;
668			};
669
670			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
671				pins = "gpio2", "gpio3";
672				function = "gpio";
673				drive-strength = <2>;
674				bias-disable;
675			};
676
677			blsp_i2c2_default: blsp-i2c2-default-state {
678				pins = "gpio6", "gpio7";
679				function = "blsp_i2c2";
680				drive-strength = <2>;
681				bias-disable;
682			};
683
684			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
685				pins = "gpio6", "gpio7";
686				function = "gpio";
687				drive-strength = <2>;
688				bias-disable;
689			};
690
691			blsp_i2c3_default: blsp-i2c3-default-state {
692				pins = "gpio10", "gpio11";
693				function = "blsp_i2c3";
694				drive-strength = <2>;
695				bias-disable;
696			};
697
698			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
699				pins = "gpio10", "gpio11";
700				function = "gpio";
701				drive-strength = <2>;
702				bias-disable;
703			};
704
705			blsp_i2c4_default: blsp-i2c4-default-state {
706				pins = "gpio14", "gpio15";
707				function = "blsp_i2c4";
708				drive-strength = <2>;
709				bias-disable;
710			};
711
712			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
713				pins = "gpio14", "gpio15";
714				function = "gpio";
715				drive-strength = <2>;
716				bias-disable;
717			};
718
719			blsp_i2c5_default: blsp-i2c5-default-state {
720				pins = "gpio18", "gpio19";
721				function = "blsp_i2c5";
722				drive-strength = <2>;
723				bias-disable;
724			};
725
726			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
727				pins = "gpio18", "gpio19";
728				function = "gpio";
729				drive-strength = <2>;
730				bias-disable;
731			};
732
733			blsp_i2c6_default: blsp-i2c6-default-state {
734				pins = "gpio22", "gpio23";
735				function = "blsp_i2c6";
736				drive-strength = <2>;
737				bias-disable;
738			};
739
740			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
741				pins = "gpio22", "gpio23";
742				function = "gpio";
743				drive-strength = <2>;
744				bias-disable;
745			};
746
747			blsp_spi1_default: blsp-spi1-default-state {
748				spi-pins {
749					pins = "gpio0", "gpio1", "gpio3";
750					function = "blsp_spi1";
751					drive-strength = <12>;
752					bias-disable;
753				};
754
755				cs-pins {
756					pins = "gpio2";
757					function = "gpio";
758					drive-strength = <16>;
759					bias-disable;
760					output-high;
761				};
762			};
763
764			blsp_spi1_sleep: blsp-spi1-sleep-state {
765				pins = "gpio0", "gpio1", "gpio2", "gpio3";
766				function = "gpio";
767				drive-strength = <2>;
768				bias-pull-down;
769			};
770
771			blsp_spi2_default: blsp-spi2-default-state {
772				spi-pins {
773					pins = "gpio4", "gpio5", "gpio7";
774					function = "blsp_spi2";
775					drive-strength = <12>;
776					bias-disable;
777				};
778
779				cs-pins {
780					pins = "gpio6";
781					function = "gpio";
782					drive-strength = <16>;
783					bias-disable;
784					output-high;
785				};
786			};
787
788			blsp_spi2_sleep: blsp-spi2-sleep-state {
789				pins = "gpio4", "gpio5", "gpio6", "gpio7";
790				function = "gpio";
791				drive-strength = <2>;
792				bias-pull-down;
793			};
794
795			blsp_spi3_default: blsp-spi3-default-state {
796				spi-pins {
797					pins = "gpio8", "gpio9", "gpio11";
798					function = "blsp_spi3";
799					drive-strength = <12>;
800					bias-disable;
801				};
802
803				cs-pins {
804					pins = "gpio10";
805					function = "gpio";
806					drive-strength = <16>;
807					bias-disable;
808					output-high;
809				};
810			};
811
812			blsp_spi3_sleep: blsp-spi3-sleep-state {
813				pins = "gpio8", "gpio9", "gpio10", "gpio11";
814				function = "gpio";
815				drive-strength = <2>;
816				bias-pull-down;
817			};
818
819			blsp_spi4_default: blsp-spi4-default-state {
820				spi-pins {
821					pins = "gpio12", "gpio13", "gpio15";
822					function = "blsp_spi4";
823					drive-strength = <12>;
824					bias-disable;
825				};
826
827				cs-pins {
828					pins = "gpio14";
829					function = "gpio";
830					drive-strength = <16>;
831					bias-disable;
832					output-high;
833				};
834			};
835
836			blsp_spi4_sleep: blsp-spi4-sleep-state {
837				pins = "gpio12", "gpio13", "gpio14", "gpio15";
838				function = "gpio";
839				drive-strength = <2>;
840				bias-pull-down;
841			};
842
843			blsp_spi5_default: blsp-spi5-default-state {
844				spi-pins {
845					pins = "gpio16", "gpio17", "gpio19";
846					function = "blsp_spi5";
847					drive-strength = <12>;
848					bias-disable;
849				};
850
851				cs-pins {
852					pins = "gpio18";
853					function = "gpio";
854					drive-strength = <16>;
855					bias-disable;
856					output-high;
857				};
858			};
859
860			blsp_spi5_sleep: blsp-spi5-sleep-state {
861				pins = "gpio16", "gpio17", "gpio18", "gpio19";
862				function = "gpio";
863				drive-strength = <2>;
864				bias-pull-down;
865			};
866
867			blsp_spi6_default: blsp-spi6-default-state {
868				spi-pins {
869					pins = "gpio20", "gpio21", "gpio23";
870					function = "blsp_spi6";
871					drive-strength = <12>;
872					bias-disable;
873				};
874
875				cs-pins {
876					pins = "gpio22";
877					function = "gpio";
878					drive-strength = <16>;
879					bias-disable;
880					output-high;
881				};
882			};
883
884			blsp_spi6_sleep: blsp-spi6-sleep-state {
885				pins = "gpio20", "gpio21", "gpio22", "gpio23";
886				function = "gpio";
887				drive-strength = <2>;
888				bias-pull-down;
889			};
890
891			blsp_uart1_default: blsp-uart1-default-state {
892				pins = "gpio0", "gpio1", "gpio2", "gpio3";
893				function = "blsp_uart1";
894				drive-strength = <16>;
895				bias-disable;
896			};
897
898			blsp_uart1_sleep: blsp-uart1-sleep-state {
899				pins = "gpio0", "gpio1", "gpio2", "gpio3";
900				function = "gpio";
901				drive-strength = <2>;
902				bias-pull-down;
903			};
904
905			blsp_uart2_default: blsp-uart2-default-state {
906				pins = "gpio4", "gpio5";
907				function = "blsp_uart2";
908				drive-strength = <16>;
909				bias-disable;
910			};
911
912			blsp_uart2_sleep: blsp-uart2-sleep-state {
913				pins = "gpio4", "gpio5";
914				function = "gpio";
915				drive-strength = <2>;
916				bias-pull-down;
917			};
918
919			camera_front_default: camera-front-default-state {
920				pwdn-pins {
921					pins = "gpio33";
922					function = "gpio";
923					drive-strength = <16>;
924					bias-disable;
925				};
926
927				rst-pins {
928					pins = "gpio28";
929					function = "gpio";
930					drive-strength = <16>;
931					bias-disable;
932				};
933
934				mclk1-pins {
935					pins = "gpio27";
936					function = "cam_mclk1";
937					drive-strength = <16>;
938					bias-disable;
939				};
940			};
941
942			camera_rear_default: camera-rear-default-state {
943				pwdn-pins {
944					pins = "gpio34";
945					function = "gpio";
946					drive-strength = <16>;
947					bias-disable;
948				};
949
950				rst-pins {
951					pins = "gpio35";
952					function = "gpio";
953					drive-strength = <16>;
954					bias-disable;
955				};
956
957				mclk0-pins {
958					pins = "gpio26";
959					function = "cam_mclk0";
960					drive-strength = <16>;
961					bias-disable;
962				};
963			};
964
965			cci0_default: cci0-default-state {
966				pins = "gpio29", "gpio30";
967				function = "cci_i2c";
968				drive-strength = <16>;
969				bias-disable;
970			};
971
972			cdc_dmic_default: cdc-dmic-default-state {
973				clk-pins {
974					pins = "gpio0";
975					function = "dmic0_clk";
976					drive-strength = <8>;
977				};
978
979				data-pins {
980					pins = "gpio1";
981					function = "dmic0_data";
982					drive-strength = <8>;
983				};
984			};
985
986			cdc_dmic_sleep: cdc-dmic-sleep-state {
987				clk-pins {
988					pins = "gpio0";
989					function = "dmic0_clk";
990					drive-strength = <2>;
991					bias-disable;
992				};
993
994				data-pins {
995					pins = "gpio1";
996					function = "dmic0_data";
997					drive-strength = <2>;
998					bias-disable;
999				};
1000			};
1001
1002			cdc_pdm_default: cdc-pdm-default-state {
1003				pins = "gpio63", "gpio64", "gpio65", "gpio66",
1004				       "gpio67", "gpio68";
1005				function = "cdc_pdm0";
1006				drive-strength = <8>;
1007				bias-disable;
1008			};
1009
1010			cdc_pdm_sleep: cdc-pdm-sleep-state {
1011				pins = "gpio63", "gpio64", "gpio65", "gpio66",
1012				       "gpio67", "gpio68";
1013				function = "cdc_pdm0";
1014				drive-strength = <2>;
1015				bias-pull-down;
1016			};
1017
1018			pri_mi2s_default: mi2s-pri-default-state {
1019				pins = "gpio113", "gpio114", "gpio115", "gpio116";
1020				function = "pri_mi2s";
1021				drive-strength = <8>;
1022				bias-disable;
1023			};
1024
1025			pri_mi2s_sleep: mi2s-pri-sleep-state {
1026				pins = "gpio113", "gpio114", "gpio115", "gpio116";
1027				function = "pri_mi2s";
1028				drive-strength = <2>;
1029				bias-disable;
1030			};
1031
1032			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
1033				pins = "gpio116";
1034				function = "pri_mi2s";
1035				drive-strength = <8>;
1036				bias-disable;
1037			};
1038
1039			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
1040				pins = "gpio116";
1041				function = "pri_mi2s";
1042				drive-strength = <2>;
1043				bias-disable;
1044			};
1045
1046			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
1047				pins = "gpio110";
1048				function = "pri_mi2s_ws";
1049				drive-strength = <8>;
1050				bias-disable;
1051			};
1052
1053			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
1054				pins = "gpio110";
1055				function = "pri_mi2s_ws";
1056				drive-strength = <2>;
1057				bias-disable;
1058			};
1059
1060			sec_mi2s_default: mi2s-sec-default-state {
1061				pins = "gpio112", "gpio117", "gpio118", "gpio119";
1062				function = "sec_mi2s";
1063				drive-strength = <8>;
1064				bias-disable;
1065			};
1066
1067			sec_mi2s_sleep: mi2s-sec-sleep-state {
1068				pins = "gpio112", "gpio117", "gpio118", "gpio119";
1069				function = "sec_mi2s";
1070				drive-strength = <2>;
1071				bias-disable;
1072			};
1073
1074			sdc1_default: sdc1-default-state {
1075				clk-pins {
1076					pins = "sdc1_clk";
1077					bias-disable;
1078					drive-strength = <16>;
1079				};
1080
1081				cmd-pins {
1082					pins = "sdc1_cmd";
1083					bias-pull-up;
1084					drive-strength = <10>;
1085				};
1086
1087				data-pins {
1088					pins = "sdc1_data";
1089					bias-pull-up;
1090					drive-strength = <10>;
1091				};
1092			};
1093
1094			sdc1_sleep: sdc1-sleep-state {
1095				clk-pins {
1096					pins = "sdc1_clk";
1097					bias-disable;
1098					drive-strength = <2>;
1099				};
1100
1101				cmd-pins {
1102					pins = "sdc1_cmd";
1103					bias-pull-up;
1104					drive-strength = <2>;
1105				};
1106
1107				data-pins {
1108					pins = "sdc1_data";
1109					bias-pull-up;
1110					drive-strength = <2>;
1111				};
1112			};
1113
1114			sdc2_default: sdc2-default-state {
1115				clk-pins {
1116					pins = "sdc2_clk";
1117					bias-disable;
1118					drive-strength = <16>;
1119				};
1120
1121				cmd-pins {
1122					pins = "sdc2_cmd";
1123					bias-pull-up;
1124					drive-strength = <10>;
1125				};
1126
1127				data-pins {
1128					pins = "sdc2_data";
1129					bias-pull-up;
1130					drive-strength = <10>;
1131				};
1132			};
1133
1134			sdc2_sleep: sdc2-sleep-state {
1135				clk-pins {
1136					pins = "sdc2_clk";
1137					bias-disable;
1138					drive-strength = <2>;
1139				};
1140
1141				cmd-pins {
1142					pins = "sdc2_cmd";
1143					bias-pull-up;
1144					drive-strength = <2>;
1145				};
1146
1147				data-pins {
1148					pins = "sdc2_data";
1149					bias-pull-up;
1150					drive-strength = <2>;
1151				};
1152			};
1153
1154			wcss_wlan_default: wcss-wlan-default-state {
1155				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
1156				function = "wcss_wlan";
1157				drive-strength = <6>;
1158				bias-pull-up;
1159			};
1160		};
1161
1162		gcc: clock-controller@1800000 {
1163			compatible = "qcom,gcc-msm8939";
1164			reg = <0x01800000 0x80000>;
1165			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1166				 <&sleep_clk>,
1167				 <&mdss_dsi0_phy 1>,
1168				 <&mdss_dsi0_phy 0>,
1169				 <0>,
1170				 <0>,
1171				 <0>;
1172			clock-names = "xo",
1173				      "sleep_clk",
1174				      "dsi0pll",
1175				      "dsi0pllbyte",
1176				      "ext_mclk",
1177				      "ext_pri_i2s",
1178				      "ext_sec_i2s";
1179			#clock-cells = <1>;
1180			#reset-cells = <1>;
1181			#power-domain-cells = <1>;
1182		};
1183
1184		tcsr_mutex: hwlock@1905000 {
1185			compatible = "qcom,tcsr-mutex";
1186			reg = <0x01905000 0x20000>;
1187			#hwlock-cells = <1>;
1188		};
1189
1190		tcsr: syscon@1937000 {
1191			compatible = "qcom,tcsr-msm8916", "syscon";
1192			reg = <0x01937000 0x30000>;
1193		};
1194
1195		mdss: display-subsystem@1a00000 {
1196			compatible = "qcom,mdss";
1197			reg = <0x01a00000 0x1000>,
1198			      <0x01ac8000 0x3000>;
1199			reg-names = "mdss_phys", "vbif_phys";
1200
1201			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1202			interrupt-controller;
1203
1204			clocks = <&gcc GCC_MDSS_AHB_CLK>,
1205				 <&gcc GCC_MDSS_AXI_CLK>,
1206				 <&gcc GCC_MDSS_VSYNC_CLK>;
1207			clock-names = "iface",
1208				      "bus",
1209				      "vsync";
1210
1211			power-domains = <&gcc MDSS_GDSC>;
1212
1213			#address-cells = <1>;
1214			#size-cells = <1>;
1215			#interrupt-cells = <1>;
1216			ranges;
1217
1218			status = "disabled";
1219
1220			mdss_mdp: display-controller@1a01000 {
1221				compatible = "qcom,mdp5";
1222				reg = <0x01a01000 0x89000>;
1223				reg-names = "mdp_phys";
1224
1225				interrupt-parent = <&mdss>;
1226				interrupts = <0>;
1227
1228				clocks = <&gcc GCC_MDSS_AHB_CLK>,
1229					 <&gcc GCC_MDSS_AXI_CLK>,
1230					 <&gcc GCC_MDSS_MDP_CLK>,
1231					 <&gcc GCC_MDSS_VSYNC_CLK>;
1232				clock-names = "iface",
1233					      "bus",
1234					      "core",
1235					      "vsync";
1236
1237				iommus = <&apps_iommu 4>;
1238
1239				interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
1240						<&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>;
1241				interconnect-names = "mdp0-mem", "mdp1-mem";
1242
1243				ports {
1244					#address-cells = <1>;
1245					#size-cells = <0>;
1246
1247					port@0 {
1248						reg = <0>;
1249						mdss_mdp_intf1_out: endpoint {
1250							remote-endpoint = <&mdss_dsi0_in>;
1251						};
1252					};
1253
1254					port@1 {
1255						reg = <1>;
1256						mdss_mdp_intf2_out: endpoint {
1257							remote-endpoint = <&mdss_dsi1_in>;
1258						};
1259					};
1260				};
1261			};
1262
1263			mdss_dsi0: dsi@1a98000 {
1264				compatible = "qcom,msm8916-dsi-ctrl",
1265					     "qcom,mdss-dsi-ctrl";
1266				reg = <0x01a98000 0x25c>;
1267				reg-names = "dsi_ctrl";
1268
1269				interrupt-parent = <&mdss>;
1270				interrupts = <4>;
1271
1272				clocks = <&gcc GCC_MDSS_MDP_CLK>,
1273					 <&gcc GCC_MDSS_AHB_CLK>,
1274					 <&gcc GCC_MDSS_AXI_CLK>,
1275					 <&gcc GCC_MDSS_BYTE0_CLK>,
1276					 <&gcc GCC_MDSS_PCLK0_CLK>,
1277					 <&gcc GCC_MDSS_ESC0_CLK>;
1278				clock-names = "mdp_core",
1279					      "iface",
1280					      "bus",
1281					      "byte",
1282					      "pixel",
1283					      "core";
1284				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
1285						  <&gcc PCLK0_CLK_SRC>;
1286				assigned-clock-parents = <&mdss_dsi0_phy 0>,
1287							 <&mdss_dsi0_phy 1>;
1288
1289				phys = <&mdss_dsi0_phy>;
1290				status = "disabled";
1291
1292				#address-cells = <1>;
1293				#size-cells = <0>;
1294
1295				ports {
1296					#address-cells = <1>;
1297					#size-cells = <0>;
1298
1299					port@0 {
1300						reg = <0>;
1301						mdss_dsi0_in: endpoint {
1302							remote-endpoint = <&mdss_mdp_intf1_out>;
1303						};
1304					};
1305
1306					port@1 {
1307						reg = <1>;
1308						mdss_dsi0_out: endpoint {
1309						};
1310					};
1311				};
1312			};
1313
1314			mdss_dsi0_phy: phy@1a98300 {
1315				compatible = "qcom,dsi-phy-28nm-lp";
1316				reg = <0x01a98300 0xd4>,
1317				      <0x01a98500 0x280>,
1318				      <0x01a98780 0x30>;
1319				reg-names = "dsi_pll",
1320					    "dsi_phy",
1321					    "dsi_phy_regulator";
1322
1323				clocks = <&gcc GCC_MDSS_AHB_CLK>,
1324					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1325				clock-names = "iface", "ref";
1326
1327				#clock-cells = <1>;
1328				#phy-cells = <0>;
1329				status = "disabled";
1330			};
1331
1332			mdss_dsi1: dsi@1aa0000 {
1333				compatible = "qcom,msm8916-dsi-ctrl",
1334					     "qcom,mdss-dsi-ctrl";
1335				reg = <0x01aa0000 0x25c>;
1336				reg-names = "dsi_ctrl";
1337
1338				interrupt-parent = <&mdss>;
1339				interrupts = <5>;
1340
1341				clocks = <&gcc GCC_MDSS_MDP_CLK>,
1342					 <&gcc GCC_MDSS_AHB_CLK>,
1343					 <&gcc GCC_MDSS_AXI_CLK>,
1344					 <&gcc GCC_MDSS_BYTE1_CLK>,
1345					 <&gcc GCC_MDSS_PCLK1_CLK>,
1346					 <&gcc GCC_MDSS_ESC1_CLK>;
1347				clock-names = "mdp_core",
1348					      "iface",
1349					      "bus",
1350					      "byte",
1351					      "pixel",
1352					      "core";
1353				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
1354						  <&gcc PCLK1_CLK_SRC>;
1355				assigned-clock-parents = <&mdss_dsi0_phy 0>,
1356							 <&mdss_dsi0_phy 1>;
1357				phys = <&mdss_dsi1_phy>;
1358				status = "disabled";
1359
1360				ports {
1361					#address-cells = <1>;
1362					#size-cells = <0>;
1363
1364					port@0 {
1365						reg = <0>;
1366						mdss_dsi1_in: endpoint {
1367							remote-endpoint = <&mdss_mdp_intf2_out>;
1368						};
1369					};
1370
1371					port@1 {
1372						reg = <1>;
1373						mdss_dsi1_out: endpoint {
1374						};
1375					};
1376				};
1377			};
1378
1379			mdss_dsi1_phy: phy@1aa0300 {
1380				compatible = "qcom,dsi-phy-28nm-lp";
1381				reg = <0x01aa0300 0xd4>,
1382				      <0x01aa0500 0x280>,
1383				      <0x01aa0780 0x30>;
1384				reg-names = "dsi_pll",
1385					    "dsi_phy",
1386					    "dsi_phy_regulator";
1387
1388				clocks = <&gcc GCC_MDSS_AHB_CLK>,
1389					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1390				clock-names = "iface", "ref";
1391
1392				#clock-cells = <1>;
1393				#phy-cells = <0>;
1394				status = "disabled";
1395			};
1396		};
1397
1398		gpu@1c00000 {
1399			compatible = "qcom,adreno-405.0", "qcom,adreno";
1400			reg = <0x01c00000 0x10000>;
1401			reg-names = "kgsl_3d0_reg_memory";
1402			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1403			interrupt-names = "kgsl_3d0_irq";
1404			clock-names = "core",
1405				      "iface",
1406				      "mem",
1407				      "mem_iface",
1408				      "alt_mem_iface",
1409				      "gfx3d",
1410				      "rbbmtimer";
1411			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
1412				 <&gcc GCC_OXILI_AHB_CLK>,
1413				 <&gcc GCC_OXILI_GMEM_CLK>,
1414				 <&gcc GCC_BIMC_GFX_CLK>,
1415				 <&gcc GCC_BIMC_GPU_CLK>,
1416				 <&gcc GFX3D_CLK_SRC>,
1417				 <&gcc GCC_OXILI_TIMER_CLK>;
1418			power-domains = <&gcc OXILI_GDSC>;
1419			operating-points-v2 = <&opp_table>;
1420			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
1421
1422			opp_table: opp-table {
1423				compatible = "operating-points-v2";
1424
1425				opp-550000000 {
1426					opp-hz = /bits/ 64 <550000000>;
1427				};
1428
1429				opp-465000000 {
1430					opp-hz = /bits/ 64 <465000000>;
1431				};
1432
1433				opp-400000000 {
1434					opp-hz = /bits/ 64 <400000000>;
1435				};
1436
1437				opp-220000000 {
1438					opp-hz = /bits/ 64 <220000000>;
1439				};
1440
1441				opp-19200000 {
1442					opp-hz = /bits/ 64 <19200000>;
1443				};
1444			};
1445		};
1446
1447		apps_iommu: iommu@1ef0000 {
1448			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
1449			reg = <0x01ef0000 0x3000>;
1450			ranges = <0 0x01e20000 0x40000>;
1451			clocks = <&gcc GCC_SMMU_CFG_CLK>,
1452				 <&gcc GCC_APSS_TCU_CLK>;
1453			clock-names = "iface", "bus";
1454			#address-cells = <1>;
1455			#size-cells = <1>;
1456			#iommu-cells = <1>;
1457			qcom,iommu-secure-id = <17>;
1458
1459			/* mdp_0: */
1460			iommu-ctx@4000 {
1461				compatible = "qcom,msm-iommu-v1-ns";
1462				reg = <0x4000 0x1000>;
1463				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
1464			};
1465
1466			/* venus_ns: */
1467			iommu-ctx@5000 {
1468				compatible = "qcom,msm-iommu-v1-sec";
1469				reg = <0x5000 0x1000>;
1470				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1471			};
1472		};
1473
1474		gpu_iommu: iommu@1f08000 {
1475			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
1476			ranges = <0 0x1f08000 0x10000>;
1477			clocks = <&gcc GCC_SMMU_CFG_CLK>,
1478				 <&gcc GCC_GFX_TCU_CLK>,
1479				 <&gcc GCC_GFX_TBU_CLK>;
1480			clock-names = "iface", "bus", "tbu";
1481			#address-cells = <1>;
1482			#size-cells = <1>;
1483			#iommu-cells = <1>;
1484			qcom,iommu-secure-id = <18>;
1485
1486			/* gfx3d_user: */
1487			iommu-ctx@1000 {
1488				compatible = "qcom,msm-iommu-v1-ns";
1489				reg = <0x1000 0x1000>;
1490				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
1491			};
1492
1493			/* gfx3d_priv: */
1494			iommu-ctx@2000 {
1495				compatible = "qcom,msm-iommu-v1-ns";
1496				reg = <0x2000 0x1000>;
1497				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
1498			};
1499		};
1500
1501		spmi_bus: spmi@200f000 {
1502			compatible = "qcom,spmi-pmic-arb";
1503			reg = <0x0200f000 0x001000>,
1504			      <0x02400000 0x400000>,
1505			      <0x02c00000 0x400000>,
1506			      <0x03800000 0x200000>,
1507			      <0x0200a000 0x002100>;
1508			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1509			interrupt-names = "periph_irq";
1510			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1511			qcom,ee = <0>;
1512			qcom,channel = <0>;
1513			#address-cells = <2>;
1514			#size-cells = <0>;
1515			interrupt-controller;
1516			#interrupt-cells = <4>;
1517		};
1518
1519		mpss: remoteproc@4080000 {
1520			compatible = "qcom,msm8916-mss-pil";
1521			reg = <0x04080000 0x100>, <0x04020000 0x040>;
1522			reg-names = "qdsp6", "rmb";
1523			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
1524					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1525					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1526					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1527					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1528			interrupt-names = "wdog",
1529					  "fatal",
1530					  "ready",
1531					  "handover",
1532					  "stop-ack";
1533			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1534				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
1535				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1536				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1537			clock-names = "iface",
1538				      "bus",
1539				      "mem",
1540				      "xo";
1541			power-domains = <&rpmpd MSM8939_VDDMDCX>,
1542					<&rpmpd MSM8939_VDDMX>;
1543			power-domain-names = "cx", "mx";
1544			qcom,smem-states = <&hexagon_smp2p_out 0>;
1545			qcom,smem-state-names = "stop";
1546			resets = <&scm 0>;
1547			reset-names = "mss_restart";
1548			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
1549			status = "disabled";
1550
1551			mba {
1552				memory-region = <&mba_mem>;
1553			};
1554
1555			mpss {
1556				memory-region = <&mpss_mem>;
1557			};
1558
1559			smd-edge {
1560				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
1561
1562				qcom,smd-edge = <0>;
1563				mboxes = <&apcs1_mbox 12>;
1564				qcom,remote-pid = <1>;
1565
1566				label = "hexagon";
1567			};
1568		};
1569
1570		sound: sound@7702000 {
1571			compatible = "qcom,apq8016-sbc-sndcard";
1572			reg = <0x07702000 0x4>,
1573			      <0x07702004 0x4>;
1574			reg-names = "mic-iomux", "spkr-iomux";
1575			status = "disabled";
1576		};
1577
1578		lpass: audio-controller@7708000 {
1579			compatible = "qcom,apq8016-lpass-cpu";
1580			reg = <0x07708000 0x10000>;
1581			reg-names = "lpass-lpaif";
1582			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1583			interrupt-names = "lpass-irq-lpaif";
1584			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
1585				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
1586				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
1587				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
1588				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
1589				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
1590				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
1591			clock-names = "ahbix-clk",
1592				      "mi2s-bit-clk0",
1593				      "mi2s-bit-clk1",
1594				      "mi2s-bit-clk2",
1595				      "mi2s-bit-clk3",
1596				      "pcnoc-mport-clk",
1597				      "pcnoc-sway-clk";
1598			#sound-dai-cells = <1>;
1599			#address-cells = <1>;
1600			#size-cells = <0>;
1601			status = "disabled";
1602		};
1603
1604		lpass_codec: audio-codec@771c000 {
1605			compatible = "qcom,msm8916-wcd-digital-codec";
1606			reg = <0x0771c000 0x400>;
1607			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
1608				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
1609			clock-names = "ahbix-clk", "mclk";
1610			#sound-dai-cells = <1>;
1611			status = "disabled";
1612		};
1613
1614		sdhc_1: mmc@7824900 {
1615			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
1616			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
1617			reg-names = "hc", "core";
1618
1619			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1620				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
1621			interrupt-names = "hc_irq", "pwr_irq";
1622			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
1623				 <&gcc GCC_SDCC1_APPS_CLK>,
1624				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1625			clock-names = "iface", "core", "xo";
1626			resets = <&gcc GCC_SDCC1_BCR>;
1627			pinctrl-0 = <&sdc1_default>;
1628			pinctrl-1 = <&sdc1_sleep>;
1629			pinctrl-names = "default", "sleep";
1630			mmc-ddr-1_8v;
1631			bus-width = <8>;
1632			non-removable;
1633			status = "disabled";
1634		};
1635
1636		sdhc_2: mmc@7864900 {
1637			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
1638			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
1639			reg-names = "hc", "core";
1640
1641			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1642				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
1643			interrupt-names = "hc_irq", "pwr_irq";
1644			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
1645				 <&gcc GCC_SDCC2_APPS_CLK>,
1646				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1647			clock-names = "iface", "core", "xo";
1648			resets = <&gcc GCC_SDCC2_BCR>;
1649			pinctrl-0 = <&sdc2_default>;
1650			pinctrl-1 = <&sdc2_sleep>;
1651			pinctrl-names = "default", "sleep";
1652			bus-width = <4>;
1653			status = "disabled";
1654		};
1655
1656		blsp_dma: dma-controller@7884000 {
1657			compatible = "qcom,bam-v1.7.0";
1658			reg = <0x07884000 0x23000>;
1659			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
1660			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
1661			clock-names = "bam_clk";
1662			#dma-cells = <1>;
1663			qcom,ee = <0>;
1664		};
1665
1666		blsp_uart1: serial@78af000 {
1667			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1668			reg = <0x078af000 0x200>;
1669			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1670			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
1671			clock-names = "core", "iface";
1672			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
1673			dma-names = "tx", "rx";
1674			pinctrl-0 = <&blsp_uart1_default>;
1675			pinctrl-1 = <&blsp_uart1_sleep>;
1676			pinctrl-names = "default", "sleep";
1677			status = "disabled";
1678		};
1679
1680		blsp_uart2: serial@78b0000 {
1681			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1682			reg = <0x078b0000 0x200>;
1683			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1684			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
1685			clock-names = "core", "iface";
1686			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
1687			dma-names = "tx", "rx";
1688			pinctrl-0 = <&blsp_uart2_default>;
1689			pinctrl-1 = <&blsp_uart2_sleep>;
1690			pinctrl-names = "default", "sleep";
1691			status = "disabled";
1692		};
1693
1694		blsp_i2c1: i2c@78b5000 {
1695			compatible = "qcom,i2c-qup-v2.2.1";
1696			reg = <0x078b5000 0x500>;
1697			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
1698			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
1699				 <&gcc GCC_BLSP1_AHB_CLK>;
1700			clock-names = "core", "iface";
1701			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
1702			dma-names = "tx", "rx";
1703			pinctrl-0 = <&blsp_i2c1_default>;
1704			pinctrl-1 = <&blsp_i2c1_sleep>;
1705			pinctrl-names = "default", "sleep";
1706			#address-cells = <1>;
1707			#size-cells = <0>;
1708			status = "disabled";
1709		};
1710
1711		blsp_spi1: spi@78b5000 {
1712			compatible = "qcom,spi-qup-v2.2.1";
1713			reg = <0x078b5000 0x500>;
1714			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
1715			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
1716				 <&gcc GCC_BLSP1_AHB_CLK>;
1717			clock-names = "core", "iface";
1718			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
1719			dma-names = "tx", "rx";
1720			pinctrl-0 = <&blsp_spi1_default>;
1721			pinctrl-1 = <&blsp_spi1_sleep>;
1722			pinctrl-names = "default", "sleep";
1723			#address-cells = <1>;
1724			#size-cells = <0>;
1725			status = "disabled";
1726		};
1727
1728		blsp_i2c2: i2c@78b6000 {
1729			compatible = "qcom,i2c-qup-v2.2.1";
1730			reg = <0x078b6000 0x500>;
1731			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1732			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
1733				 <&gcc GCC_BLSP1_AHB_CLK>;
1734			clock-names = "core", "iface";
1735			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
1736			dma-names = "tx", "rx";
1737			pinctrl-0 = <&blsp_i2c2_default>;
1738			pinctrl-1 = <&blsp_i2c2_sleep>;
1739			pinctrl-names = "default", "sleep";
1740			#address-cells = <1>;
1741			#size-cells = <0>;
1742			status = "disabled";
1743		};
1744
1745		blsp_spi2: spi@78b6000 {
1746			compatible = "qcom,spi-qup-v2.2.1";
1747			reg = <0x078b6000 0x500>;
1748			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1749			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
1750				 <&gcc GCC_BLSP1_AHB_CLK>;
1751			clock-names = "core", "iface";
1752			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
1753			dma-names = "tx", "rx";
1754			pinctrl-0 = <&blsp_spi2_default>;
1755			pinctrl-1 = <&blsp_spi2_sleep>;
1756			pinctrl-names = "default", "sleep";
1757			#address-cells = <1>;
1758			#size-cells = <0>;
1759			status = "disabled";
1760		};
1761
1762		blsp_i2c3: i2c@78b7000 {
1763			compatible = "qcom,i2c-qup-v2.2.1";
1764			reg = <0x078b7000 0x500>;
1765			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1766			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
1767				 <&gcc GCC_BLSP1_AHB_CLK>;
1768			clock-names = "core", "iface";
1769			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
1770			dma-names = "tx", "rx";
1771			pinctrl-0 = <&blsp_i2c3_default>;
1772			pinctrl-1 = <&blsp_i2c3_sleep>;
1773			pinctrl-names = "default", "sleep";
1774			#address-cells = <1>;
1775			#size-cells = <0>;
1776			status = "disabled";
1777		};
1778
1779		blsp_spi3: spi@78b7000 {
1780			compatible = "qcom,spi-qup-v2.2.1";
1781			reg = <0x078b7000 0x500>;
1782			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1783			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
1784				 <&gcc GCC_BLSP1_AHB_CLK>;
1785			clock-names = "core", "iface";
1786			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
1787			dma-names = "tx", "rx";
1788			pinctrl-0 = <&blsp_spi3_default>;
1789			pinctrl-1 = <&blsp_spi3_sleep>;
1790			pinctrl-names = "default", "sleep";
1791			#address-cells = <1>;
1792			#size-cells = <0>;
1793			status = "disabled";
1794		};
1795
1796		blsp_i2c4: i2c@78b8000 {
1797			compatible = "qcom,i2c-qup-v2.2.1";
1798			reg = <0x078b8000 0x500>;
1799			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1800			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
1801				 <&gcc GCC_BLSP1_AHB_CLK>;
1802			clock-names = "core", "iface";
1803			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
1804			dma-names = "tx", "rx";
1805			pinctrl-0 = <&blsp_i2c4_default>;
1806			pinctrl-1 = <&blsp_i2c4_sleep>;
1807			pinctrl-names = "default", "sleep";
1808			#address-cells = <1>;
1809			#size-cells = <0>;
1810			status = "disabled";
1811		};
1812
1813		blsp_spi4: spi@78b8000 {
1814			compatible = "qcom,spi-qup-v2.2.1";
1815			reg = <0x078b8000 0x500>;
1816			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1817			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
1818				 <&gcc GCC_BLSP1_AHB_CLK>;
1819			clock-names = "core", "iface";
1820			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
1821			dma-names = "tx", "rx";
1822			pinctrl-0 = <&blsp_spi4_default>;
1823			pinctrl-1 = <&blsp_spi4_sleep>;
1824			pinctrl-names = "default", "sleep";
1825			#address-cells = <1>;
1826			#size-cells = <0>;
1827			status = "disabled";
1828		};
1829
1830		blsp_i2c5: i2c@78b9000 {
1831			compatible = "qcom,i2c-qup-v2.2.1";
1832			reg = <0x078b9000 0x500>;
1833			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
1834			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
1835				 <&gcc GCC_BLSP1_AHB_CLK>;
1836			clock-names = "core", "iface";
1837			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
1838			dma-names = "tx", "rx";
1839			pinctrl-0 = <&blsp_i2c5_default>;
1840			pinctrl-1 = <&blsp_i2c5_sleep>;
1841			pinctrl-names = "default", "sleep";
1842			#address-cells = <1>;
1843			#size-cells = <0>;
1844			status = "disabled";
1845		};
1846
1847		blsp_spi5: spi@78b9000 {
1848			compatible = "qcom,spi-qup-v2.2.1";
1849			reg = <0x078b9000 0x500>;
1850			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
1851			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
1852				 <&gcc GCC_BLSP1_AHB_CLK>;
1853			clock-names = "core", "iface";
1854			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
1855			dma-names = "tx", "rx";
1856			pinctrl-0 = <&blsp_spi5_default>;
1857			pinctrl-1 = <&blsp_spi5_sleep>;
1858			pinctrl-names = "default", "sleep";
1859			#address-cells = <1>;
1860			#size-cells = <0>;
1861			status = "disabled";
1862		};
1863
1864		blsp_i2c6: i2c@78ba000 {
1865			compatible = "qcom,i2c-qup-v2.2.1";
1866			reg = <0x078ba000 0x500>;
1867			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1868			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
1869				 <&gcc GCC_BLSP1_AHB_CLK>;
1870			clock-names = "core", "iface";
1871			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
1872			dma-names = "tx", "rx";
1873			pinctrl-0 = <&blsp_i2c6_default>;
1874			pinctrl-1 = <&blsp_i2c6_sleep>;
1875			pinctrl-names = "default", "sleep";
1876			#address-cells = <1>;
1877			#size-cells = <0>;
1878			status = "disabled";
1879		};
1880
1881		blsp_spi6: spi@78ba000 {
1882			compatible = "qcom,spi-qup-v2.2.1";
1883			reg = <0x078ba000 0x500>;
1884			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1885			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
1886				 <&gcc GCC_BLSP1_AHB_CLK>;
1887			clock-names = "core", "iface";
1888			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
1889			dma-names = "tx", "rx";
1890			pinctrl-0 = <&blsp_spi6_default>;
1891			pinctrl-1 = <&blsp_spi6_sleep>;
1892			pinctrl-names = "default", "sleep";
1893			#address-cells = <1>;
1894			#size-cells = <0>;
1895			status = "disabled";
1896		};
1897
1898		usb: usb@78d9000 {
1899			compatible = "qcom,ci-hdrc";
1900			reg = <0x078d9000 0x200>,
1901			      <0x078d9200 0x200>;
1902			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
1903				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
1904			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
1905				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
1906			clock-names = "iface", "core";
1907			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
1908			assigned-clock-rates = <80000000>;
1909			resets = <&gcc GCC_USB_HS_BCR>;
1910			reset-names = "core";
1911			#reset-cells = <1>;
1912			phy_type = "ulpi";
1913			dr_mode = "otg";
1914			adp-disable;
1915			hnp-disable;
1916			srp-disable;
1917			ahb-burst-config = <0>;
1918			phy-names = "usb-phy";
1919			phys = <&usb_hs_phy>;
1920			status = "disabled";
1921
1922			ulpi {
1923				usb_hs_phy: phy {
1924					compatible = "qcom,usb-hs-phy-msm8916",
1925						     "qcom,usb-hs-phy";
1926					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1927						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
1928					clock-names = "ref", "sleep";
1929					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
1930					reset-names = "phy", "por";
1931					#phy-cells = <0>;
1932					qcom,init-seq = /bits/ 8 <0x0 0x44>,
1933								 <0x1 0x6b>,
1934								 <0x2 0x24>,
1935								 <0x3 0x13>;
1936				};
1937			};
1938		};
1939
1940		wcnss: remoteproc@a204000 {
1941			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
1942			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
1943					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1944					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1945					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1946					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1947			interrupt-names = "wdog",
1948					  "fatal",
1949					  "ready",
1950					  "handover",
1951					  "stop-ack";
1952			reg = <0x0a204000 0x2000>,
1953			      <0x0a202000 0x1000>,
1954			      <0x0a21b000 0x3000>;
1955			reg-names = "ccu", "dxe", "pmu";
1956
1957			memory-region = <&wcnss_mem>;
1958
1959			power-domains = <&rpmpd MSM8939_VDDCX>,
1960					<&rpmpd MSM8939_VDDMX>;
1961			power-domain-names = "cx", "mx";
1962
1963			qcom,smem-states = <&wcnss_smp2p_out 0>;
1964			qcom,smem-state-names = "stop";
1965
1966			pinctrl-names = "default";
1967			pinctrl-0 = <&wcss_wlan_default>;
1968
1969			status = "disabled";
1970
1971			wcnss_iris: iris {
1972				/* Separate chip, compatible is board-specific */
1973				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
1974				clock-names = "xo";
1975			};
1976
1977			smd-edge {
1978				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
1979				qcom,ipc = <&apcs1_mbox 8 17>;
1980				qcom,smd-edge = <6>;
1981				qcom,remote-pid = <4>;
1982
1983				label = "pronto";
1984
1985				wcnss {
1986					compatible = "qcom,wcnss";
1987					qcom,smd-channels = "WCNSS_CTRL";
1988
1989					qcom,mmio = <&wcnss>;
1990
1991					wcnss_bt: bluetooth {
1992						compatible = "qcom,wcnss-bt";
1993					};
1994
1995					wcnss_wifi: wifi {
1996						compatible = "qcom,wcnss-wlan";
1997
1998						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1999							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
2000						interrupt-names = "tx", "rx";
2001
2002						qcom,smem-states = <&apps_smsm 10>,
2003								   <&apps_smsm 9>;
2004						qcom,smem-state-names = "tx-enable",
2005									"tx-rings-empty";
2006					};
2007				};
2008			};
2009		};
2010
2011		intc: interrupt-controller@b000000 {
2012			compatible = "qcom,msm-qgic2";
2013			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
2014			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
2015			interrupt-controller;
2016			#interrupt-cells = <3>;
2017			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
2018		};
2019
2020		apcs1_mbox: mailbox@b011000 {
2021			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
2022			reg = <0x0b011000 0x1000>;
2023			clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
2024			clock-names = "pll", "aux", "ref";
2025			#clock-cells = <0>;
2026			assigned-clocks = <&apcs2>;
2027			assigned-clock-rates = <297600000>;
2028			#mbox-cells = <1>;
2029		};
2030
2031		a53pll_c1: clock@b016000 {
2032			compatible = "qcom,msm8939-a53pll";
2033			reg = <0x0b016000 0x40>;
2034			#clock-cells = <0>;
2035		};
2036
2037		acc0: clock-controller@b088000 {
2038			compatible = "qcom,kpss-acc-v2";
2039			reg = <0x0b088000 0x1000>;
2040		};
2041
2042		saw0: power-manager@b089000 {
2043			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2044			reg = <0x0b089000 0x1000>;
2045		};
2046
2047		acc1: clock-controller@b098000 {
2048			compatible = "qcom,kpss-acc-v2";
2049			reg = <0x0b098000 0x1000>;
2050		};
2051
2052		saw1: power-manager@b099000 {
2053			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2054			reg = <0x0b099000 0x1000>;
2055		};
2056
2057		acc2: clock-controller@b0a8000 {
2058			compatible = "qcom,kpss-acc-v2";
2059			reg = <0x0b0a8000 0x1000>;
2060		};
2061
2062		saw2: power-manager@b0a9000 {
2063			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2064			reg = <0x0b0a9000 0x1000>;
2065		};
2066
2067		acc3: clock-controller@b0b8000 {
2068			compatible = "qcom,kpss-acc-v2";
2069			reg = <0x0b0b8000 0x1000>;
2070		};
2071
2072		saw3: power-manager@b0b9000 {
2073			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2074			reg = <0x0b0b9000 0x1000>;
2075		};
2076
2077		apcs0_mbox: mailbox@b111000 {
2078			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
2079			reg = <0x0b111000 0x1000>;
2080			clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
2081			clock-names = "pll", "aux", "ref";
2082			#clock-cells = <0>;
2083			#mbox-cells = <1>;
2084		};
2085
2086		a53pll_c0: clock@b116000 {
2087			compatible = "qcom,msm8939-a53pll";
2088			reg = <0x0b116000 0x40>;
2089			#clock-cells = <0>;
2090		};
2091
2092		timer@b120000 {
2093			compatible = "arm,armv7-timer-mem";
2094			reg = <0x0b120000 0x1000>;
2095			#address-cells = <1>;
2096			#size-cells = <1>;
2097			ranges;
2098
2099			frame@b121000 {
2100				reg = <0x0b121000 0x1000>,
2101				      <0x0b122000 0x1000>;
2102				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
2103					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
2104				frame-number = <0>;
2105			};
2106
2107			frame@b123000 {
2108				reg = <0x0b123000 0x1000>;
2109				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
2110				frame-number = <1>;
2111				status = "disabled";
2112			};
2113
2114			frame@b124000 {
2115				reg = <0x0b124000 0x1000>;
2116				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
2117				frame-number = <2>;
2118				status = "disabled";
2119			};
2120
2121			frame@b125000 {
2122				reg = <0x0b125000 0x1000>;
2123				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
2124				frame-number = <3>;
2125				status = "disabled";
2126			};
2127
2128			frame@b126000 {
2129				reg = <0x0b126000 0x1000>;
2130				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
2131				frame-number = <4>;
2132				status = "disabled";
2133			};
2134
2135			frame@b127000 {
2136				reg = <0x0b127000 0x1000>;
2137				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
2138				frame-number = <5>;
2139				status = "disabled";
2140			};
2141
2142			frame@b128000 {
2143				reg = <0x0b128000 0x1000>;
2144				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
2145				frame-number = <6>;
2146				status = "disabled";
2147			};
2148		};
2149
2150		acc4: clock-controller@b188000 {
2151			compatible = "qcom,kpss-acc-v2";
2152			reg = <0x0b188000 0x1000>;
2153		};
2154
2155		saw4: power-manager@b189000 {
2156			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2157			reg = <0x0b189000 0x1000>;
2158		};
2159
2160		acc5: clock-controller@b198000 {
2161			compatible = "qcom,kpss-acc-v2";
2162			reg = <0x0b198000 0x1000>;
2163		};
2164
2165		saw5: power-manager@b199000 {
2166			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2167			reg = <0x0b199000 0x1000>;
2168		};
2169
2170		acc6: clock-controller@b1a8000 {
2171			compatible = "qcom,kpss-acc-v2";
2172			reg = <0x0b1a8000 0x1000>;
2173		};
2174
2175		saw6: power-manager@b1a9000 {
2176			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2177			reg = <0x0b1a9000 0x1000>;
2178		};
2179
2180		acc7: clock-controller@b1b8000 {
2181			compatible = "qcom,kpss-acc-v2";
2182			reg = <0x0b1b8000 0x1000>;
2183		};
2184
2185		saw7: power-manager@b1b9000 {
2186			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
2187			reg = <0x0b1b9000 0x1000>;
2188		};
2189
2190		a53pll_cci: clock@b1d0000 {
2191			compatible = "qcom,msm8939-a53pll";
2192			reg = <0x0b1d0000 0x40>;
2193			#clock-cells = <0>;
2194		};
2195
2196		apcs2: mailbox@b1d1000 {
2197			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
2198			reg = <0x0b1d1000 0x1000>;
2199			clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
2200			clock-names = "pll", "aux", "ref";
2201			#clock-cells = <0>;
2202			#mbox-cells = <1>;
2203		};
2204	};
2205
2206	thermal_zones: thermal-zones {
2207		cpu0-thermal {
2208			polling-delay-passive = <250>;
2209			polling-delay = <1000>;
2210
2211			thermal-sensors = <&tsens 5>;
2212
2213			trips {
2214				cpu0_alert: trip0 {
2215					temperature = <75000>;
2216					hysteresis = <2000>;
2217					type = "passive";
2218				};
2219
2220				cpu0_crit: trip1 {
2221					temperature = <115000>;
2222					hysteresis = <0>;
2223					type = "critical";
2224				};
2225			};
2226
2227			cooling-maps {
2228				map0 {
2229					trip = <&cpu0_alert>;
2230					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2231							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2232							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2233							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2234				};
2235			};
2236		};
2237
2238		cpu1-thermal {
2239			polling-delay-passive = <250>;
2240			polling-delay = <1000>;
2241
2242			thermal-sensors = <&tsens 6>;
2243
2244			trips {
2245				cpu1_alert: trip0 {
2246					temperature = <75000>;
2247					hysteresis = <2000>;
2248					type = "passive";
2249				};
2250
2251				cpu1_crit: trip1 {
2252					temperature = <110000>;
2253					hysteresis = <2000>;
2254					type = "critical";
2255				};
2256			};
2257
2258			cooling-maps {
2259				map0 {
2260					trip = <&cpu1_alert>;
2261					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2262							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2263							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2264							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2265				};
2266			};
2267		};
2268
2269		cpu2-thermal {
2270			polling-delay-passive = <250>;
2271			polling-delay = <1000>;
2272
2273			thermal-sensors = <&tsens 7>;
2274
2275			trips {
2276				cpu2_alert: trip0 {
2277					temperature = <75000>;
2278					hysteresis = <2000>;
2279					type = "passive";
2280				};
2281
2282				cpu2_crit: trip1 {
2283					temperature = <110000>;
2284					hysteresis = <2000>;
2285					type = "critical";
2286				};
2287			};
2288
2289			cooling-maps {
2290				map0 {
2291					trip = <&cpu2_alert>;
2292					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2293							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2294							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2295							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2296				};
2297			};
2298		};
2299
2300		cpu3-thermal {
2301			polling-delay-passive = <250>;
2302			polling-delay = <1000>;
2303
2304			thermal-sensors = <&tsens 8>;
2305
2306			trips {
2307				cpu3_alert: trip0 {
2308					temperature = <75000>;
2309					hysteresis = <2000>;
2310					type = "passive";
2311				};
2312
2313				cpu3_crit: trip1 {
2314					temperature = <110000>;
2315					hysteresis = <2000>;
2316					type = "critical";
2317				};
2318			};
2319
2320			cooling-maps {
2321				map0 {
2322					trip = <&cpu3_alert>;
2323					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2324							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2325							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2326							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2327				};
2328			};
2329		};
2330
2331		cpu4567-thermal {
2332			polling-delay-passive = <250>;
2333			polling-delay = <1000>;
2334
2335			thermal-sensors = <&tsens 9>;
2336
2337			trips {
2338				cpu4567_alert: trip0 {
2339					temperature = <75000>;
2340					hysteresis = <2000>;
2341					type = "passive";
2342				};
2343
2344				cpu4567_crit: trip1 {
2345					temperature = <110000>;
2346					hysteresis = <2000>;
2347					type = "critical";
2348				};
2349			};
2350
2351			cooling-maps {
2352				map0 {
2353					trip = <&cpu4567_alert>;
2354					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2355							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2356							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2357							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2358				};
2359			};
2360		};
2361
2362		gpu-thermal {
2363			polling-delay-passive = <250>;
2364			polling-delay = <1000>;
2365
2366			thermal-sensors = <&tsens 3>;
2367
2368			trips {
2369				gpu_alert0: trip-point0 {
2370					temperature = <75000>;
2371					hysteresis = <2000>;
2372					type = "passive";
2373				};
2374
2375				gpu_crit: gpu_crit {
2376					temperature = <95000>;
2377					hysteresis = <2000>;
2378					type = "critical";
2379				};
2380			};
2381		};
2382
2383		modem1-thermal {
2384			polling-delay-passive = <250>;
2385			polling-delay = <1000>;
2386
2387			thermal-sensors = <&tsens 0>;
2388
2389			trips {
2390				modem1_alert0: trip-point0 {
2391					temperature = <85000>;
2392					hysteresis = <2000>;
2393					type = "hot";
2394				};
2395			};
2396		};
2397
2398		modem2-thermal {
2399			polling-delay-passive = <250>;
2400			polling-delay = <1000>;
2401
2402			thermal-sensors = <&tsens 2>;
2403
2404			trips {
2405				modem2_alert0: trip-point0 {
2406					temperature = <85000>;
2407					hysteresis = <2000>;
2408					type = "hot";
2409				};
2410			};
2411		};
2412
2413		camera-thermal {
2414			polling-delay-passive = <250>;
2415			polling-delay = <1000>;
2416
2417			thermal-sensors = <&tsens 1>;
2418
2419			trips {
2420				cam_alert0: trip-point0 {
2421					temperature = <75000>;
2422					hysteresis = <2000>;
2423					type = "hot";
2424				};
2425			};
2426		};
2427	};
2428
2429	timer {
2430		compatible = "arm,armv8-timer";
2431		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2432			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2433			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2434			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
2435	};
2436};
2437