1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/arm/coresight-cti-dt.h> 7#include <dt-bindings/clock/qcom,gcc-msm8916.h> 8#include <dt-bindings/clock/qcom,rpmcc.h> 9#include <dt-bindings/interconnect/qcom,msm8916.h> 10#include <dt-bindings/interrupt-controller/arm-gic.h> 11#include <dt-bindings/power/qcom-rpmpd.h> 12#include <dt-bindings/reset/qcom,gcc-msm8916.h> 13#include <dt-bindings/thermal/thermal.h> 14 15/ { 16 interrupt-parent = <&intc>; 17 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 aliases { 22 mmc0 = &sdhc_1; /* SDC1 eMMC slot */ 23 mmc1 = &sdhc_2; /* SDC2 SD card slot */ 24 }; 25 26 chosen { }; 27 28 memory@80000000 { 29 device_type = "memory"; 30 /* We expect the bootloader to fill in the reg */ 31 reg = <0 0x80000000 0 0>; 32 }; 33 34 reserved-memory { 35 #address-cells = <2>; 36 #size-cells = <2>; 37 ranges; 38 39 tz-apps@86000000 { 40 reg = <0x0 0x86000000 0x0 0x300000>; 41 no-map; 42 }; 43 44 smem@86300000 { 45 compatible = "qcom,smem"; 46 reg = <0x0 0x86300000 0x0 0x100000>; 47 no-map; 48 49 hwlocks = <&tcsr_mutex 3>; 50 qcom,rpm-msg-ram = <&rpm_msg_ram>; 51 }; 52 53 hypervisor@86400000 { 54 reg = <0x0 0x86400000 0x0 0x100000>; 55 no-map; 56 }; 57 58 tz@86500000 { 59 reg = <0x0 0x86500000 0x0 0x180000>; 60 no-map; 61 }; 62 63 reserved@86680000 { 64 reg = <0x0 0x86680000 0x0 0x80000>; 65 no-map; 66 }; 67 68 rmtfs@86700000 { 69 compatible = "qcom,rmtfs-mem"; 70 reg = <0x0 0x86700000 0x0 0xe0000>; 71 no-map; 72 73 qcom,client-id = <1>; 74 }; 75 76 rfsa@867e0000 { 77 reg = <0x0 0x867e0000 0x0 0x20000>; 78 no-map; 79 }; 80 81 mpss_mem: mpss@86800000 { 82 reg = <0x0 0x86800000 0x0 0x2b00000>; 83 no-map; 84 }; 85 86 wcnss_mem: wcnss@89300000 { 87 reg = <0x0 0x89300000 0x0 0x600000>; 88 no-map; 89 }; 90 91 venus_mem: venus@89900000 { 92 reg = <0x0 0x89900000 0x0 0x600000>; 93 no-map; 94 }; 95 96 mba_mem: mba@8ea00000 { 97 no-map; 98 reg = <0 0x8ea00000 0 0x100000>; 99 }; 100 }; 101 102 clocks { 103 xo_board: xo-board { 104 compatible = "fixed-clock"; 105 #clock-cells = <0>; 106 clock-frequency = <19200000>; 107 }; 108 109 sleep_clk: sleep-clk { 110 compatible = "fixed-clock"; 111 #clock-cells = <0>; 112 clock-frequency = <32768>; 113 }; 114 }; 115 116 cpus { 117 #address-cells = <1>; 118 #size-cells = <0>; 119 120 CPU0: cpu@0 { 121 device_type = "cpu"; 122 compatible = "arm,cortex-a53"; 123 reg = <0x0>; 124 next-level-cache = <&L2_0>; 125 enable-method = "psci"; 126 clocks = <&apcs>; 127 operating-points-v2 = <&cpu_opp_table>; 128 #cooling-cells = <2>; 129 power-domains = <&CPU_PD0>; 130 power-domain-names = "psci"; 131 qcom,acc = <&cpu0_acc>; 132 qcom,saw = <&cpu0_saw>; 133 }; 134 135 CPU1: cpu@1 { 136 device_type = "cpu"; 137 compatible = "arm,cortex-a53"; 138 reg = <0x1>; 139 next-level-cache = <&L2_0>; 140 enable-method = "psci"; 141 clocks = <&apcs>; 142 operating-points-v2 = <&cpu_opp_table>; 143 #cooling-cells = <2>; 144 power-domains = <&CPU_PD1>; 145 power-domain-names = "psci"; 146 qcom,acc = <&cpu1_acc>; 147 qcom,saw = <&cpu1_saw>; 148 }; 149 150 CPU2: cpu@2 { 151 device_type = "cpu"; 152 compatible = "arm,cortex-a53"; 153 reg = <0x2>; 154 next-level-cache = <&L2_0>; 155 enable-method = "psci"; 156 clocks = <&apcs>; 157 operating-points-v2 = <&cpu_opp_table>; 158 #cooling-cells = <2>; 159 power-domains = <&CPU_PD2>; 160 power-domain-names = "psci"; 161 qcom,acc = <&cpu2_acc>; 162 qcom,saw = <&cpu2_saw>; 163 }; 164 165 CPU3: cpu@3 { 166 device_type = "cpu"; 167 compatible = "arm,cortex-a53"; 168 reg = <0x3>; 169 next-level-cache = <&L2_0>; 170 enable-method = "psci"; 171 clocks = <&apcs>; 172 operating-points-v2 = <&cpu_opp_table>; 173 #cooling-cells = <2>; 174 power-domains = <&CPU_PD3>; 175 power-domain-names = "psci"; 176 qcom,acc = <&cpu3_acc>; 177 qcom,saw = <&cpu3_saw>; 178 }; 179 180 L2_0: l2-cache { 181 compatible = "cache"; 182 cache-level = <2>; 183 }; 184 185 idle-states { 186 entry-method = "psci"; 187 188 CPU_SLEEP_0: cpu-sleep-0 { 189 compatible = "arm,idle-state"; 190 idle-state-name = "standalone-power-collapse"; 191 arm,psci-suspend-param = <0x40000002>; 192 entry-latency-us = <130>; 193 exit-latency-us = <150>; 194 min-residency-us = <2000>; 195 local-timer-stop; 196 }; 197 }; 198 199 domain-idle-states { 200 201 CLUSTER_RET: cluster-retention { 202 compatible = "domain-idle-state"; 203 arm,psci-suspend-param = <0x41000012>; 204 entry-latency-us = <500>; 205 exit-latency-us = <500>; 206 min-residency-us = <2000>; 207 }; 208 209 CLUSTER_PWRDN: cluster-gdhs { 210 compatible = "domain-idle-state"; 211 arm,psci-suspend-param = <0x41000032>; 212 entry-latency-us = <2000>; 213 exit-latency-us = <2000>; 214 min-residency-us = <6000>; 215 }; 216 }; 217 }; 218 219 cpu_opp_table: opp-table-cpu { 220 compatible = "operating-points-v2"; 221 opp-shared; 222 223 opp-200000000 { 224 opp-hz = /bits/ 64 <200000000>; 225 }; 226 opp-400000000 { 227 opp-hz = /bits/ 64 <400000000>; 228 }; 229 opp-800000000 { 230 opp-hz = /bits/ 64 <800000000>; 231 }; 232 opp-998400000 { 233 opp-hz = /bits/ 64 <998400000>; 234 }; 235 }; 236 237 firmware { 238 scm: scm { 239 compatible = "qcom,scm-msm8916", "qcom,scm"; 240 clocks = <&gcc GCC_CRYPTO_CLK>, 241 <&gcc GCC_CRYPTO_AXI_CLK>, 242 <&gcc GCC_CRYPTO_AHB_CLK>; 243 clock-names = "core", "bus", "iface"; 244 #reset-cells = <1>; 245 246 qcom,dload-mode = <&tcsr 0x6100>; 247 }; 248 }; 249 250 pmu { 251 compatible = "arm,cortex-a53-pmu"; 252 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 253 }; 254 255 psci { 256 compatible = "arm,psci-1.0"; 257 method = "smc"; 258 259 CPU_PD0: power-domain-cpu0 { 260 #power-domain-cells = <0>; 261 power-domains = <&CLUSTER_PD>; 262 domain-idle-states = <&CPU_SLEEP_0>; 263 }; 264 265 CPU_PD1: power-domain-cpu1 { 266 #power-domain-cells = <0>; 267 power-domains = <&CLUSTER_PD>; 268 domain-idle-states = <&CPU_SLEEP_0>; 269 }; 270 271 CPU_PD2: power-domain-cpu2 { 272 #power-domain-cells = <0>; 273 power-domains = <&CLUSTER_PD>; 274 domain-idle-states = <&CPU_SLEEP_0>; 275 }; 276 277 CPU_PD3: power-domain-cpu3 { 278 #power-domain-cells = <0>; 279 power-domains = <&CLUSTER_PD>; 280 domain-idle-states = <&CPU_SLEEP_0>; 281 }; 282 283 CLUSTER_PD: power-domain-cluster { 284 #power-domain-cells = <0>; 285 domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; 286 }; 287 }; 288 289 smd { 290 compatible = "qcom,smd"; 291 292 rpm { 293 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 294 qcom,ipc = <&apcs 8 0>; 295 qcom,smd-edge = <15>; 296 297 rpm_requests: rpm-requests { 298 compatible = "qcom,rpm-msm8916"; 299 qcom,smd-channels = "rpm_requests"; 300 301 rpmcc: clock-controller { 302 compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; 303 #clock-cells = <1>; 304 clocks = <&xo_board>; 305 clock-names = "xo"; 306 }; 307 308 rpmpd: power-controller { 309 compatible = "qcom,msm8916-rpmpd"; 310 #power-domain-cells = <1>; 311 operating-points-v2 = <&rpmpd_opp_table>; 312 313 rpmpd_opp_table: opp-table { 314 compatible = "operating-points-v2"; 315 316 rpmpd_opp_ret: opp1 { 317 opp-level = <1>; 318 }; 319 rpmpd_opp_svs_krait: opp2 { 320 opp-level = <2>; 321 }; 322 rpmpd_opp_svs_soc: opp3 { 323 opp-level = <3>; 324 }; 325 rpmpd_opp_nom: opp4 { 326 opp-level = <4>; 327 }; 328 rpmpd_opp_turbo: opp5 { 329 opp-level = <5>; 330 }; 331 rpmpd_opp_super_turbo: opp6 { 332 opp-level = <6>; 333 }; 334 }; 335 }; 336 }; 337 }; 338 }; 339 340 smp2p-hexagon { 341 compatible = "qcom,smp2p"; 342 qcom,smem = <435>, <428>; 343 344 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; 345 346 qcom,ipc = <&apcs 8 14>; 347 348 qcom,local-pid = <0>; 349 qcom,remote-pid = <1>; 350 351 hexagon_smp2p_out: master-kernel { 352 qcom,entry-name = "master-kernel"; 353 354 #qcom,smem-state-cells = <1>; 355 }; 356 357 hexagon_smp2p_in: slave-kernel { 358 qcom,entry-name = "slave-kernel"; 359 360 interrupt-controller; 361 #interrupt-cells = <2>; 362 }; 363 }; 364 365 smp2p-wcnss { 366 compatible = "qcom,smp2p"; 367 qcom,smem = <451>, <431>; 368 369 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 370 371 qcom,ipc = <&apcs 8 18>; 372 373 qcom,local-pid = <0>; 374 qcom,remote-pid = <4>; 375 376 wcnss_smp2p_out: master-kernel { 377 qcom,entry-name = "master-kernel"; 378 379 #qcom,smem-state-cells = <1>; 380 }; 381 382 wcnss_smp2p_in: slave-kernel { 383 qcom,entry-name = "slave-kernel"; 384 385 interrupt-controller; 386 #interrupt-cells = <2>; 387 }; 388 }; 389 390 smsm { 391 compatible = "qcom,smsm"; 392 393 #address-cells = <1>; 394 #size-cells = <0>; 395 396 qcom,ipc-1 = <&apcs 8 13>; 397 qcom,ipc-3 = <&apcs 8 19>; 398 399 apps_smsm: apps@0 { 400 reg = <0>; 401 402 #qcom,smem-state-cells = <1>; 403 }; 404 405 hexagon_smsm: hexagon@1 { 406 reg = <1>; 407 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 408 409 interrupt-controller; 410 #interrupt-cells = <2>; 411 }; 412 413 wcnss_smsm: wcnss@6 { 414 reg = <6>; 415 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; 416 417 interrupt-controller; 418 #interrupt-cells = <2>; 419 }; 420 }; 421 422 soc: soc@0 { 423 #address-cells = <1>; 424 #size-cells = <1>; 425 ranges = <0 0 0 0xffffffff>; 426 compatible = "simple-bus"; 427 428 rng@22000 { 429 compatible = "qcom,prng"; 430 reg = <0x00022000 0x200>; 431 clocks = <&gcc GCC_PRNG_AHB_CLK>; 432 clock-names = "core"; 433 }; 434 435 restart@4ab000 { 436 compatible = "qcom,pshold"; 437 reg = <0x004ab000 0x4>; 438 }; 439 440 qfprom: qfprom@5c000 { 441 compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; 442 reg = <0x0005c000 0x1000>; 443 #address-cells = <1>; 444 #size-cells = <1>; 445 tsens_caldata: caldata@d0 { 446 reg = <0xd0 0x8>; 447 }; 448 tsens_calsel: calsel@ec { 449 reg = <0xec 0x4>; 450 }; 451 }; 452 453 rpm_msg_ram: sram@60000 { 454 compatible = "qcom,rpm-msg-ram"; 455 reg = <0x00060000 0x8000>; 456 }; 457 458 sram@290000 { 459 compatible = "qcom,msm8916-rpm-stats"; 460 reg = <0x00290000 0x10000>; 461 }; 462 463 bimc: interconnect@400000 { 464 compatible = "qcom,msm8916-bimc"; 465 reg = <0x00400000 0x62000>; 466 #interconnect-cells = <1>; 467 clock-names = "bus", "bus_a"; 468 clocks = <&rpmcc RPM_SMD_BIMC_CLK>, 469 <&rpmcc RPM_SMD_BIMC_A_CLK>; 470 }; 471 472 tsens: thermal-sensor@4a9000 { 473 compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; 474 reg = <0x004a9000 0x1000>, /* TM */ 475 <0x004a8000 0x1000>; /* SROT */ 476 nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; 477 nvmem-cell-names = "calib", "calib_sel"; 478 #qcom,sensors = <5>; 479 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 480 interrupt-names = "uplow"; 481 #thermal-sensor-cells = <1>; 482 }; 483 484 pcnoc: interconnect@500000 { 485 compatible = "qcom,msm8916-pcnoc"; 486 reg = <0x00500000 0x11000>; 487 #interconnect-cells = <1>; 488 clock-names = "bus", "bus_a"; 489 clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, 490 <&rpmcc RPM_SMD_PCNOC_A_CLK>; 491 }; 492 493 snoc: interconnect@580000 { 494 compatible = "qcom,msm8916-snoc"; 495 reg = <0x00580000 0x14000>; 496 #interconnect-cells = <1>; 497 clock-names = "bus", "bus_a"; 498 clocks = <&rpmcc RPM_SMD_SNOC_CLK>, 499 <&rpmcc RPM_SMD_SNOC_A_CLK>; 500 }; 501 502 stm: stm@802000 { 503 compatible = "arm,coresight-stm", "arm,primecell"; 504 reg = <0x00802000 0x1000>, 505 <0x09280000 0x180000>; 506 reg-names = "stm-base", "stm-stimulus-base"; 507 508 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 509 clock-names = "apb_pclk", "atclk"; 510 511 status = "disabled"; 512 513 out-ports { 514 port { 515 stm_out: endpoint { 516 remote-endpoint = <&funnel0_in7>; 517 }; 518 }; 519 }; 520 }; 521 522 /* System CTIs */ 523 /* CTI 0 - TMC connections */ 524 cti0: cti@810000 { 525 compatible = "arm,coresight-cti", "arm,primecell"; 526 reg = <0x00810000 0x1000>; 527 528 clocks = <&rpmcc RPM_QDSS_CLK>; 529 clock-names = "apb_pclk"; 530 531 status = "disabled"; 532 }; 533 534 /* CTI 1 - TPIU connections */ 535 cti1: cti@811000 { 536 compatible = "arm,coresight-cti", "arm,primecell"; 537 reg = <0x00811000 0x1000>; 538 539 clocks = <&rpmcc RPM_QDSS_CLK>; 540 clock-names = "apb_pclk"; 541 542 status = "disabled"; 543 }; 544 545 /* CTIs 2-11 - no information - not instantiated */ 546 547 tpiu: tpiu@820000 { 548 compatible = "arm,coresight-tpiu", "arm,primecell"; 549 reg = <0x00820000 0x1000>; 550 551 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 552 clock-names = "apb_pclk", "atclk"; 553 554 status = "disabled"; 555 556 in-ports { 557 port { 558 tpiu_in: endpoint { 559 remote-endpoint = <&replicator_out1>; 560 }; 561 }; 562 }; 563 }; 564 565 funnel0: funnel@821000 { 566 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 567 reg = <0x00821000 0x1000>; 568 569 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 570 clock-names = "apb_pclk", "atclk"; 571 572 status = "disabled"; 573 574 in-ports { 575 #address-cells = <1>; 576 #size-cells = <0>; 577 578 /* 579 * Not described input ports: 580 * 0 - connected to Resource and Power Manger CPU ETM 581 * 1 - not-connected 582 * 2 - connected to Modem CPU ETM 583 * 3 - not-connected 584 * 5 - not-connected 585 * 6 - connected trought funnel to Wireless CPU ETM 586 * 7 - connected to STM component 587 */ 588 589 port@4 { 590 reg = <4>; 591 funnel0_in4: endpoint { 592 remote-endpoint = <&funnel1_out>; 593 }; 594 }; 595 596 port@7 { 597 reg = <7>; 598 funnel0_in7: endpoint { 599 remote-endpoint = <&stm_out>; 600 }; 601 }; 602 }; 603 604 out-ports { 605 port { 606 funnel0_out: endpoint { 607 remote-endpoint = <&etf_in>; 608 }; 609 }; 610 }; 611 }; 612 613 replicator: replicator@824000 { 614 compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; 615 reg = <0x00824000 0x1000>; 616 617 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 618 clock-names = "apb_pclk", "atclk"; 619 620 status = "disabled"; 621 622 out-ports { 623 #address-cells = <1>; 624 #size-cells = <0>; 625 626 port@0 { 627 reg = <0>; 628 replicator_out0: endpoint { 629 remote-endpoint = <&etr_in>; 630 }; 631 }; 632 port@1 { 633 reg = <1>; 634 replicator_out1: endpoint { 635 remote-endpoint = <&tpiu_in>; 636 }; 637 }; 638 }; 639 640 in-ports { 641 port { 642 replicator_in: endpoint { 643 remote-endpoint = <&etf_out>; 644 }; 645 }; 646 }; 647 }; 648 649 etf: etf@825000 { 650 compatible = "arm,coresight-tmc", "arm,primecell"; 651 reg = <0x00825000 0x1000>; 652 653 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 654 clock-names = "apb_pclk", "atclk"; 655 656 status = "disabled"; 657 658 in-ports { 659 port { 660 etf_in: endpoint { 661 remote-endpoint = <&funnel0_out>; 662 }; 663 }; 664 }; 665 666 out-ports { 667 port { 668 etf_out: endpoint { 669 remote-endpoint = <&replicator_in>; 670 }; 671 }; 672 }; 673 }; 674 675 etr: etr@826000 { 676 compatible = "arm,coresight-tmc", "arm,primecell"; 677 reg = <0x00826000 0x1000>; 678 679 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 680 clock-names = "apb_pclk", "atclk"; 681 682 status = "disabled"; 683 684 in-ports { 685 port { 686 etr_in: endpoint { 687 remote-endpoint = <&replicator_out0>; 688 }; 689 }; 690 }; 691 }; 692 693 funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ 694 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 695 reg = <0x00841000 0x1000>; 696 697 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 698 clock-names = "apb_pclk", "atclk"; 699 700 status = "disabled"; 701 702 in-ports { 703 #address-cells = <1>; 704 #size-cells = <0>; 705 706 port@0 { 707 reg = <0>; 708 funnel1_in0: endpoint { 709 remote-endpoint = <&etm0_out>; 710 }; 711 }; 712 port@1 { 713 reg = <1>; 714 funnel1_in1: endpoint { 715 remote-endpoint = <&etm1_out>; 716 }; 717 }; 718 port@2 { 719 reg = <2>; 720 funnel1_in2: endpoint { 721 remote-endpoint = <&etm2_out>; 722 }; 723 }; 724 port@3 { 725 reg = <3>; 726 funnel1_in3: endpoint { 727 remote-endpoint = <&etm3_out>; 728 }; 729 }; 730 }; 731 732 out-ports { 733 port { 734 funnel1_out: endpoint { 735 remote-endpoint = <&funnel0_in4>; 736 }; 737 }; 738 }; 739 }; 740 741 debug0: debug@850000 { 742 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 743 reg = <0x00850000 0x1000>; 744 clocks = <&rpmcc RPM_QDSS_CLK>; 745 clock-names = "apb_pclk"; 746 cpu = <&CPU0>; 747 status = "disabled"; 748 }; 749 750 debug1: debug@852000 { 751 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 752 reg = <0x00852000 0x1000>; 753 clocks = <&rpmcc RPM_QDSS_CLK>; 754 clock-names = "apb_pclk"; 755 cpu = <&CPU1>; 756 status = "disabled"; 757 }; 758 759 debug2: debug@854000 { 760 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 761 reg = <0x00854000 0x1000>; 762 clocks = <&rpmcc RPM_QDSS_CLK>; 763 clock-names = "apb_pclk"; 764 cpu = <&CPU2>; 765 status = "disabled"; 766 }; 767 768 debug3: debug@856000 { 769 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 770 reg = <0x00856000 0x1000>; 771 clocks = <&rpmcc RPM_QDSS_CLK>; 772 clock-names = "apb_pclk"; 773 cpu = <&CPU3>; 774 status = "disabled"; 775 }; 776 777 /* Core CTIs; CTIs 12-15 */ 778 /* CTI - CPU-0 */ 779 cti12: cti@858000 { 780 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 781 "arm,primecell"; 782 reg = <0x00858000 0x1000>; 783 784 clocks = <&rpmcc RPM_QDSS_CLK>; 785 clock-names = "apb_pclk"; 786 787 cpu = <&CPU0>; 788 arm,cs-dev-assoc = <&etm0>; 789 790 status = "disabled"; 791 }; 792 793 /* CTI - CPU-1 */ 794 cti13: cti@859000 { 795 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 796 "arm,primecell"; 797 reg = <0x00859000 0x1000>; 798 799 clocks = <&rpmcc RPM_QDSS_CLK>; 800 clock-names = "apb_pclk"; 801 802 cpu = <&CPU1>; 803 arm,cs-dev-assoc = <&etm1>; 804 805 status = "disabled"; 806 }; 807 808 /* CTI - CPU-2 */ 809 cti14: cti@85a000 { 810 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 811 "arm,primecell"; 812 reg = <0x0085a000 0x1000>; 813 814 clocks = <&rpmcc RPM_QDSS_CLK>; 815 clock-names = "apb_pclk"; 816 817 cpu = <&CPU2>; 818 arm,cs-dev-assoc = <&etm2>; 819 820 status = "disabled"; 821 }; 822 823 /* CTI - CPU-3 */ 824 cti15: cti@85b000 { 825 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 826 "arm,primecell"; 827 reg = <0x0085b000 0x1000>; 828 829 clocks = <&rpmcc RPM_QDSS_CLK>; 830 clock-names = "apb_pclk"; 831 832 cpu = <&CPU3>; 833 arm,cs-dev-assoc = <&etm3>; 834 835 status = "disabled"; 836 }; 837 838 etm0: etm@85c000 { 839 compatible = "arm,coresight-etm4x", "arm,primecell"; 840 reg = <0x0085c000 0x1000>; 841 842 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 843 clock-names = "apb_pclk", "atclk"; 844 arm,coresight-loses-context-with-cpu; 845 846 cpu = <&CPU0>; 847 848 status = "disabled"; 849 850 out-ports { 851 port { 852 etm0_out: endpoint { 853 remote-endpoint = <&funnel1_in0>; 854 }; 855 }; 856 }; 857 }; 858 859 etm1: etm@85d000 { 860 compatible = "arm,coresight-etm4x", "arm,primecell"; 861 reg = <0x0085d000 0x1000>; 862 863 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 864 clock-names = "apb_pclk", "atclk"; 865 arm,coresight-loses-context-with-cpu; 866 867 cpu = <&CPU1>; 868 869 status = "disabled"; 870 871 out-ports { 872 port { 873 etm1_out: endpoint { 874 remote-endpoint = <&funnel1_in1>; 875 }; 876 }; 877 }; 878 }; 879 880 etm2: etm@85e000 { 881 compatible = "arm,coresight-etm4x", "arm,primecell"; 882 reg = <0x0085e000 0x1000>; 883 884 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 885 clock-names = "apb_pclk", "atclk"; 886 arm,coresight-loses-context-with-cpu; 887 888 cpu = <&CPU2>; 889 890 status = "disabled"; 891 892 out-ports { 893 port { 894 etm2_out: endpoint { 895 remote-endpoint = <&funnel1_in2>; 896 }; 897 }; 898 }; 899 }; 900 901 etm3: etm@85f000 { 902 compatible = "arm,coresight-etm4x", "arm,primecell"; 903 reg = <0x0085f000 0x1000>; 904 905 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 906 clock-names = "apb_pclk", "atclk"; 907 arm,coresight-loses-context-with-cpu; 908 909 cpu = <&CPU3>; 910 911 status = "disabled"; 912 913 out-ports { 914 port { 915 etm3_out: endpoint { 916 remote-endpoint = <&funnel1_in3>; 917 }; 918 }; 919 }; 920 }; 921 922 msmgpio: pinctrl@1000000 { 923 compatible = "qcom,msm8916-pinctrl"; 924 reg = <0x01000000 0x300000>; 925 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 926 gpio-controller; 927 gpio-ranges = <&msmgpio 0 0 122>; 928 #gpio-cells = <2>; 929 interrupt-controller; 930 #interrupt-cells = <2>; 931 }; 932 933 gcc: clock-controller@1800000 { 934 compatible = "qcom,gcc-msm8916"; 935 #clock-cells = <1>; 936 #reset-cells = <1>; 937 #power-domain-cells = <1>; 938 reg = <0x01800000 0x80000>; 939 clocks = <&xo_board>, 940 <&sleep_clk>, 941 <&dsi_phy0 1>, 942 <&dsi_phy0 0>, 943 <0>, 944 <0>, 945 <0>; 946 clock-names = "xo", 947 "sleep_clk", 948 "dsi0pll", 949 "dsi0pllbyte", 950 "ext_mclk", 951 "ext_pri_i2s", 952 "ext_sec_i2s"; 953 }; 954 955 tcsr_mutex: hwlock@1905000 { 956 compatible = "qcom,tcsr-mutex"; 957 reg = <0x01905000 0x20000>; 958 #hwlock-cells = <1>; 959 }; 960 961 tcsr: syscon@1937000 { 962 compatible = "qcom,tcsr-msm8916", "syscon"; 963 reg = <0x01937000 0x30000>; 964 }; 965 966 mdss: mdss@1a00000 { 967 status = "disabled"; 968 compatible = "qcom,mdss"; 969 reg = <0x01a00000 0x1000>, 970 <0x01ac8000 0x3000>; 971 reg-names = "mdss_phys", "vbif_phys"; 972 973 power-domains = <&gcc MDSS_GDSC>; 974 975 clocks = <&gcc GCC_MDSS_AHB_CLK>, 976 <&gcc GCC_MDSS_AXI_CLK>, 977 <&gcc GCC_MDSS_VSYNC_CLK>; 978 clock-names = "iface", 979 "bus", 980 "vsync"; 981 982 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 983 984 interrupt-controller; 985 #interrupt-cells = <1>; 986 987 #address-cells = <1>; 988 #size-cells = <1>; 989 ranges; 990 991 mdp: mdp@1a01000 { 992 compatible = "qcom,mdp5"; 993 reg = <0x01a01000 0x89000>; 994 reg-names = "mdp_phys"; 995 996 interrupt-parent = <&mdss>; 997 interrupts = <0>; 998 999 clocks = <&gcc GCC_MDSS_AHB_CLK>, 1000 <&gcc GCC_MDSS_AXI_CLK>, 1001 <&gcc GCC_MDSS_MDP_CLK>, 1002 <&gcc GCC_MDSS_VSYNC_CLK>; 1003 clock-names = "iface", 1004 "bus", 1005 "core", 1006 "vsync"; 1007 1008 iommus = <&apps_iommu 4>; 1009 1010 ports { 1011 #address-cells = <1>; 1012 #size-cells = <0>; 1013 1014 port@0 { 1015 reg = <0>; 1016 mdp5_intf1_out: endpoint { 1017 remote-endpoint = <&dsi0_in>; 1018 }; 1019 }; 1020 }; 1021 }; 1022 1023 dsi0: dsi@1a98000 { 1024 compatible = "qcom,mdss-dsi-ctrl"; 1025 reg = <0x01a98000 0x25c>; 1026 reg-names = "dsi_ctrl"; 1027 1028 interrupt-parent = <&mdss>; 1029 interrupts = <4>; 1030 1031 assigned-clocks = <&gcc BYTE0_CLK_SRC>, 1032 <&gcc PCLK0_CLK_SRC>; 1033 assigned-clock-parents = <&dsi_phy0 0>, 1034 <&dsi_phy0 1>; 1035 1036 clocks = <&gcc GCC_MDSS_MDP_CLK>, 1037 <&gcc GCC_MDSS_AHB_CLK>, 1038 <&gcc GCC_MDSS_AXI_CLK>, 1039 <&gcc GCC_MDSS_BYTE0_CLK>, 1040 <&gcc GCC_MDSS_PCLK0_CLK>, 1041 <&gcc GCC_MDSS_ESC0_CLK>; 1042 clock-names = "mdp_core", 1043 "iface", 1044 "bus", 1045 "byte", 1046 "pixel", 1047 "core"; 1048 phys = <&dsi_phy0>; 1049 phy-names = "dsi-phy"; 1050 1051 #address-cells = <1>; 1052 #size-cells = <0>; 1053 1054 ports { 1055 #address-cells = <1>; 1056 #size-cells = <0>; 1057 1058 port@0 { 1059 reg = <0>; 1060 dsi0_in: endpoint { 1061 remote-endpoint = <&mdp5_intf1_out>; 1062 }; 1063 }; 1064 1065 port@1 { 1066 reg = <1>; 1067 dsi0_out: endpoint { 1068 }; 1069 }; 1070 }; 1071 }; 1072 1073 dsi_phy0: dsi-phy@1a98300 { 1074 compatible = "qcom,dsi-phy-28nm-lp"; 1075 reg = <0x01a98300 0xd4>, 1076 <0x01a98500 0x280>, 1077 <0x01a98780 0x30>; 1078 reg-names = "dsi_pll", 1079 "dsi_phy", 1080 "dsi_phy_regulator"; 1081 1082 #clock-cells = <1>; 1083 #phy-cells = <0>; 1084 1085 clocks = <&gcc GCC_MDSS_AHB_CLK>, 1086 <&xo_board>; 1087 clock-names = "iface", "ref"; 1088 }; 1089 }; 1090 1091 camss: camss@1b00000 { 1092 compatible = "qcom,msm8916-camss"; 1093 reg = <0x01b0ac00 0x200>, 1094 <0x01b00030 0x4>, 1095 <0x01b0b000 0x200>, 1096 <0x01b00038 0x4>, 1097 <0x01b08000 0x100>, 1098 <0x01b08400 0x100>, 1099 <0x01b0a000 0x500>, 1100 <0x01b00020 0x10>, 1101 <0x01b10000 0x1000>; 1102 reg-names = "csiphy0", 1103 "csiphy0_clk_mux", 1104 "csiphy1", 1105 "csiphy1_clk_mux", 1106 "csid0", 1107 "csid1", 1108 "ispif", 1109 "csi_clk_mux", 1110 "vfe0"; 1111 interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, 1112 <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, 1113 <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, 1114 <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, 1115 <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, 1116 <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; 1117 interrupt-names = "csiphy0", 1118 "csiphy1", 1119 "csid0", 1120 "csid1", 1121 "ispif", 1122 "vfe0"; 1123 power-domains = <&gcc VFE_GDSC>; 1124 clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, 1125 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, 1126 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, 1127 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, 1128 <&gcc GCC_CAMSS_CSI0_AHB_CLK>, 1129 <&gcc GCC_CAMSS_CSI0_CLK>, 1130 <&gcc GCC_CAMSS_CSI0PHY_CLK>, 1131 <&gcc GCC_CAMSS_CSI0PIX_CLK>, 1132 <&gcc GCC_CAMSS_CSI0RDI_CLK>, 1133 <&gcc GCC_CAMSS_CSI1_AHB_CLK>, 1134 <&gcc GCC_CAMSS_CSI1_CLK>, 1135 <&gcc GCC_CAMSS_CSI1PHY_CLK>, 1136 <&gcc GCC_CAMSS_CSI1PIX_CLK>, 1137 <&gcc GCC_CAMSS_CSI1RDI_CLK>, 1138 <&gcc GCC_CAMSS_AHB_CLK>, 1139 <&gcc GCC_CAMSS_VFE0_CLK>, 1140 <&gcc GCC_CAMSS_CSI_VFE0_CLK>, 1141 <&gcc GCC_CAMSS_VFE_AHB_CLK>, 1142 <&gcc GCC_CAMSS_VFE_AXI_CLK>; 1143 clock-names = "top_ahb", 1144 "ispif_ahb", 1145 "csiphy0_timer", 1146 "csiphy1_timer", 1147 "csi0_ahb", 1148 "csi0", 1149 "csi0_phy", 1150 "csi0_pix", 1151 "csi0_rdi", 1152 "csi1_ahb", 1153 "csi1", 1154 "csi1_phy", 1155 "csi1_pix", 1156 "csi1_rdi", 1157 "ahb", 1158 "vfe0", 1159 "csi_vfe0", 1160 "vfe_ahb", 1161 "vfe_axi"; 1162 iommus = <&apps_iommu 3>; 1163 status = "disabled"; 1164 ports { 1165 #address-cells = <1>; 1166 #size-cells = <0>; 1167 }; 1168 }; 1169 1170 cci: cci@1b0c000 { 1171 compatible = "qcom,msm8916-cci"; 1172 #address-cells = <1>; 1173 #size-cells = <0>; 1174 reg = <0x01b0c000 0x1000>; 1175 interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; 1176 clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, 1177 <&gcc GCC_CAMSS_CCI_AHB_CLK>, 1178 <&gcc GCC_CAMSS_CCI_CLK>, 1179 <&gcc GCC_CAMSS_AHB_CLK>; 1180 clock-names = "camss_top_ahb", "cci_ahb", 1181 "cci", "camss_ahb"; 1182 assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, 1183 <&gcc GCC_CAMSS_CCI_CLK>; 1184 assigned-clock-rates = <80000000>, <19200000>; 1185 pinctrl-names = "default"; 1186 pinctrl-0 = <&cci0_default>; 1187 status = "disabled"; 1188 1189 cci_i2c0: i2c-bus@0 { 1190 reg = <0>; 1191 clock-frequency = <400000>; 1192 #address-cells = <1>; 1193 #size-cells = <0>; 1194 }; 1195 }; 1196 1197 gpu@1c00000 { 1198 compatible = "qcom,adreno-306.0", "qcom,adreno"; 1199 reg = <0x01c00000 0x20000>; 1200 reg-names = "kgsl_3d0_reg_memory"; 1201 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 1202 interrupt-names = "kgsl_3d0_irq"; 1203 clock-names = 1204 "core", 1205 "iface", 1206 "mem", 1207 "mem_iface", 1208 "alt_mem_iface", 1209 "gfx3d"; 1210 clocks = 1211 <&gcc GCC_OXILI_GFX3D_CLK>, 1212 <&gcc GCC_OXILI_AHB_CLK>, 1213 <&gcc GCC_OXILI_GMEM_CLK>, 1214 <&gcc GCC_BIMC_GFX_CLK>, 1215 <&gcc GCC_BIMC_GPU_CLK>, 1216 <&gcc GFX3D_CLK_SRC>; 1217 power-domains = <&gcc OXILI_GDSC>; 1218 operating-points-v2 = <&gpu_opp_table>; 1219 iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; 1220 1221 gpu_opp_table: opp-table { 1222 compatible = "operating-points-v2"; 1223 1224 opp-400000000 { 1225 opp-hz = /bits/ 64 <400000000>; 1226 }; 1227 opp-19200000 { 1228 opp-hz = /bits/ 64 <19200000>; 1229 }; 1230 }; 1231 }; 1232 1233 venus: video-codec@1d00000 { 1234 compatible = "qcom,msm8916-venus"; 1235 reg = <0x01d00000 0xff000>; 1236 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 1237 power-domains = <&gcc VENUS_GDSC>; 1238 clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, 1239 <&gcc GCC_VENUS0_AHB_CLK>, 1240 <&gcc GCC_VENUS0_AXI_CLK>; 1241 clock-names = "core", "iface", "bus"; 1242 iommus = <&apps_iommu 5>; 1243 memory-region = <&venus_mem>; 1244 status = "okay"; 1245 1246 video-decoder { 1247 compatible = "venus-decoder"; 1248 }; 1249 1250 video-encoder { 1251 compatible = "venus-encoder"; 1252 }; 1253 }; 1254 1255 apps_iommu: iommu@1ef0000 { 1256 #address-cells = <1>; 1257 #size-cells = <1>; 1258 #iommu-cells = <1>; 1259 compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; 1260 ranges = <0 0x01e20000 0x40000>; 1261 reg = <0x01ef0000 0x3000>; 1262 clocks = <&gcc GCC_SMMU_CFG_CLK>, 1263 <&gcc GCC_APSS_TCU_CLK>; 1264 clock-names = "iface", "bus"; 1265 qcom,iommu-secure-id = <17>; 1266 1267 // vfe: 1268 iommu-ctx@3000 { 1269 compatible = "qcom,msm-iommu-v1-sec"; 1270 reg = <0x3000 0x1000>; 1271 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1272 }; 1273 1274 // mdp_0: 1275 iommu-ctx@4000 { 1276 compatible = "qcom,msm-iommu-v1-ns"; 1277 reg = <0x4000 0x1000>; 1278 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1279 }; 1280 1281 // venus_ns: 1282 iommu-ctx@5000 { 1283 compatible = "qcom,msm-iommu-v1-sec"; 1284 reg = <0x5000 0x1000>; 1285 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1286 }; 1287 }; 1288 1289 gpu_iommu: iommu@1f08000 { 1290 #address-cells = <1>; 1291 #size-cells = <1>; 1292 #iommu-cells = <1>; 1293 compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; 1294 ranges = <0 0x01f08000 0x10000>; 1295 clocks = <&gcc GCC_SMMU_CFG_CLK>, 1296 <&gcc GCC_GFX_TCU_CLK>; 1297 clock-names = "iface", "bus"; 1298 qcom,iommu-secure-id = <18>; 1299 1300 // gfx3d_user: 1301 iommu-ctx@1000 { 1302 compatible = "qcom,msm-iommu-v1-ns"; 1303 reg = <0x1000 0x1000>; 1304 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; 1305 }; 1306 1307 // gfx3d_priv: 1308 iommu-ctx@2000 { 1309 compatible = "qcom,msm-iommu-v1-ns"; 1310 reg = <0x2000 0x1000>; 1311 interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; 1312 }; 1313 }; 1314 1315 spmi_bus: spmi@200f000 { 1316 compatible = "qcom,spmi-pmic-arb"; 1317 reg = <0x0200f000 0x001000>, 1318 <0x02400000 0x400000>, 1319 <0x02c00000 0x400000>, 1320 <0x03800000 0x200000>, 1321 <0x0200a000 0x002100>; 1322 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 1323 interrupt-names = "periph_irq"; 1324 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1325 qcom,ee = <0>; 1326 qcom,channel = <0>; 1327 #address-cells = <2>; 1328 #size-cells = <0>; 1329 interrupt-controller; 1330 #interrupt-cells = <4>; 1331 }; 1332 1333 bam_dmux_dma: dma-controller@4044000 { 1334 compatible = "qcom,bam-v1.7.0"; 1335 reg = <0x04044000 0x19000>; 1336 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1337 #dma-cells = <1>; 1338 qcom,ee = <0>; 1339 1340 num-channels = <6>; 1341 qcom,num-ees = <1>; 1342 qcom,powered-remotely; 1343 1344 status = "disabled"; 1345 }; 1346 1347 mpss: remoteproc@4080000 { 1348 compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; 1349 reg = <0x04080000 0x100>, 1350 <0x04020000 0x040>; 1351 1352 reg-names = "qdsp6", "rmb"; 1353 1354 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, 1355 <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1356 <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1357 <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1358 <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1359 interrupt-names = "wdog", "fatal", "ready", 1360 "handover", "stop-ack"; 1361 1362 power-domains = <&rpmpd MSM8916_VDDCX>, 1363 <&rpmpd MSM8916_VDDMX>; 1364 power-domain-names = "cx", "mx"; 1365 1366 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, 1367 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 1368 <&gcc GCC_BOOT_ROM_AHB_CLK>, 1369 <&xo_board>; 1370 clock-names = "iface", "bus", "mem", "xo"; 1371 1372 qcom,smem-states = <&hexagon_smp2p_out 0>; 1373 qcom,smem-state-names = "stop"; 1374 1375 resets = <&scm 0>; 1376 reset-names = "mss_restart"; 1377 1378 qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; 1379 1380 status = "disabled"; 1381 1382 mba { 1383 memory-region = <&mba_mem>; 1384 }; 1385 1386 mpss { 1387 memory-region = <&mpss_mem>; 1388 }; 1389 1390 bam_dmux: bam-dmux { 1391 compatible = "qcom,bam-dmux"; 1392 1393 interrupt-parent = <&hexagon_smsm>; 1394 interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; 1395 interrupt-names = "pc", "pc-ack"; 1396 1397 qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; 1398 qcom,smem-state-names = "pc", "pc-ack"; 1399 1400 dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; 1401 dma-names = "tx", "rx"; 1402 1403 status = "disabled"; 1404 }; 1405 1406 smd-edge { 1407 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; 1408 1409 qcom,smd-edge = <0>; 1410 qcom,ipc = <&apcs 8 12>; 1411 qcom,remote-pid = <1>; 1412 1413 label = "hexagon"; 1414 1415 fastrpc { 1416 compatible = "qcom,fastrpc"; 1417 qcom,smd-channels = "fastrpcsmd-apps-dsp"; 1418 label = "adsp"; 1419 qcom,non-secure-domain; 1420 1421 #address-cells = <1>; 1422 #size-cells = <0>; 1423 1424 cb@1 { 1425 compatible = "qcom,fastrpc-compute-cb"; 1426 reg = <1>; 1427 }; 1428 }; 1429 }; 1430 }; 1431 1432 sound: sound@7702000 { 1433 status = "disabled"; 1434 compatible = "qcom,apq8016-sbc-sndcard"; 1435 reg = <0x07702000 0x4>, <0x07702004 0x4>; 1436 reg-names = "mic-iomux", "spkr-iomux"; 1437 }; 1438 1439 lpass: audio-controller@7708000 { 1440 status = "disabled"; 1441 compatible = "qcom,lpass-cpu-apq8016"; 1442 1443 /* 1444 * Note: Unlike the name would suggest, the SEC_I2S_CLK 1445 * is actually only used by Tertiary MI2S while 1446 * Primary/Secondary MI2S both use the PRI_I2S_CLK. 1447 */ 1448 clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, 1449 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, 1450 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, 1451 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, 1452 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, 1453 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, 1454 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; 1455 1456 clock-names = "ahbix-clk", 1457 "pcnoc-mport-clk", 1458 "pcnoc-sway-clk", 1459 "mi2s-bit-clk0", 1460 "mi2s-bit-clk1", 1461 "mi2s-bit-clk2", 1462 "mi2s-bit-clk3"; 1463 #sound-dai-cells = <1>; 1464 1465 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; 1466 interrupt-names = "lpass-irq-lpaif"; 1467 reg = <0x07708000 0x10000>; 1468 reg-names = "lpass-lpaif"; 1469 1470 #address-cells = <1>; 1471 #size-cells = <0>; 1472 }; 1473 1474 lpass_codec: audio-codec@771c000 { 1475 compatible = "qcom,msm8916-wcd-digital-codec"; 1476 reg = <0x0771c000 0x400>; 1477 clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, 1478 <&gcc GCC_CODEC_DIGCODEC_CLK>; 1479 clock-names = "ahbix-clk", "mclk"; 1480 #sound-dai-cells = <1>; 1481 }; 1482 1483 sdhc_1: mmc@7824000 { 1484 compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; 1485 reg = <0x07824900 0x11c>, <0x07824000 0x800>; 1486 reg-names = "hc", "core"; 1487 1488 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1489 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 1490 interrupt-names = "hc_irq", "pwr_irq"; 1491 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 1492 <&gcc GCC_SDCC1_APPS_CLK>, 1493 <&xo_board>; 1494 clock-names = "iface", "core", "xo"; 1495 mmc-ddr-1_8v; 1496 bus-width = <8>; 1497 non-removable; 1498 status = "disabled"; 1499 }; 1500 1501 sdhc_2: mmc@7864000 { 1502 compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; 1503 reg = <0x07864900 0x11c>, <0x07864000 0x800>; 1504 reg-names = "hc", "core"; 1505 1506 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1507 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 1508 interrupt-names = "hc_irq", "pwr_irq"; 1509 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 1510 <&gcc GCC_SDCC2_APPS_CLK>, 1511 <&xo_board>; 1512 clock-names = "iface", "core", "xo"; 1513 bus-width = <4>; 1514 status = "disabled"; 1515 }; 1516 1517 blsp_dma: dma-controller@7884000 { 1518 compatible = "qcom,bam-v1.7.0"; 1519 reg = <0x07884000 0x23000>; 1520 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 1521 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 1522 clock-names = "bam_clk"; 1523 #dma-cells = <1>; 1524 qcom,ee = <0>; 1525 status = "disabled"; 1526 }; 1527 1528 blsp1_uart1: serial@78af000 { 1529 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1530 reg = <0x078af000 0x200>; 1531 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1532 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 1533 clock-names = "core", "iface"; 1534 dmas = <&blsp_dma 0>, <&blsp_dma 1>; 1535 dma-names = "tx", "rx"; 1536 pinctrl-names = "default", "sleep"; 1537 pinctrl-0 = <&blsp1_uart1_default>; 1538 pinctrl-1 = <&blsp1_uart1_sleep>; 1539 status = "disabled"; 1540 }; 1541 1542 blsp1_uart2: serial@78b0000 { 1543 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1544 reg = <0x078b0000 0x200>; 1545 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 1546 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 1547 clock-names = "core", "iface"; 1548 dmas = <&blsp_dma 2>, <&blsp_dma 3>; 1549 dma-names = "tx", "rx"; 1550 pinctrl-names = "default", "sleep"; 1551 pinctrl-0 = <&blsp1_uart2_default>; 1552 pinctrl-1 = <&blsp1_uart2_sleep>; 1553 status = "disabled"; 1554 }; 1555 1556 blsp_i2c1: i2c@78b5000 { 1557 compatible = "qcom,i2c-qup-v2.2.1"; 1558 reg = <0x078b5000 0x500>; 1559 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1560 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, 1561 <&gcc GCC_BLSP1_AHB_CLK>; 1562 clock-names = "core", "iface"; 1563 pinctrl-names = "default", "sleep"; 1564 pinctrl-0 = <&i2c1_default>; 1565 pinctrl-1 = <&i2c1_sleep>; 1566 #address-cells = <1>; 1567 #size-cells = <0>; 1568 status = "disabled"; 1569 }; 1570 1571 blsp_spi1: spi@78b5000 { 1572 compatible = "qcom,spi-qup-v2.2.1"; 1573 reg = <0x078b5000 0x500>; 1574 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1575 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 1576 <&gcc GCC_BLSP1_AHB_CLK>; 1577 clock-names = "core", "iface"; 1578 dmas = <&blsp_dma 4>, <&blsp_dma 5>; 1579 dma-names = "tx", "rx"; 1580 pinctrl-names = "default", "sleep"; 1581 pinctrl-0 = <&spi1_default>; 1582 pinctrl-1 = <&spi1_sleep>; 1583 #address-cells = <1>; 1584 #size-cells = <0>; 1585 status = "disabled"; 1586 }; 1587 1588 blsp_i2c2: i2c@78b6000 { 1589 compatible = "qcom,i2c-qup-v2.2.1"; 1590 reg = <0x078b6000 0x500>; 1591 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1592 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 1593 <&gcc GCC_BLSP1_AHB_CLK>; 1594 clock-names = "core", "iface"; 1595 pinctrl-names = "default", "sleep"; 1596 pinctrl-0 = <&i2c2_default>; 1597 pinctrl-1 = <&i2c2_sleep>; 1598 #address-cells = <1>; 1599 #size-cells = <0>; 1600 status = "disabled"; 1601 }; 1602 1603 blsp_spi2: spi@78b6000 { 1604 compatible = "qcom,spi-qup-v2.2.1"; 1605 reg = <0x078b6000 0x500>; 1606 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1607 clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, 1608 <&gcc GCC_BLSP1_AHB_CLK>; 1609 clock-names = "core", "iface"; 1610 dmas = <&blsp_dma 6>, <&blsp_dma 7>; 1611 dma-names = "tx", "rx"; 1612 pinctrl-names = "default", "sleep"; 1613 pinctrl-0 = <&spi2_default>; 1614 pinctrl-1 = <&spi2_sleep>; 1615 #address-cells = <1>; 1616 #size-cells = <0>; 1617 status = "disabled"; 1618 }; 1619 1620 blsp_i2c3: i2c@78b7000 { 1621 compatible = "qcom,i2c-qup-v2.2.1"; 1622 reg = <0x078b7000 0x500>; 1623 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1624 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 1625 <&gcc GCC_BLSP1_AHB_CLK>; 1626 clock-names = "core", "iface"; 1627 pinctrl-names = "default", "sleep"; 1628 pinctrl-0 = <&i2c3_default>; 1629 pinctrl-1 = <&i2c3_sleep>; 1630 #address-cells = <1>; 1631 #size-cells = <0>; 1632 status = "disabled"; 1633 }; 1634 1635 blsp_spi3: spi@78b7000 { 1636 compatible = "qcom,spi-qup-v2.2.1"; 1637 reg = <0x078b7000 0x500>; 1638 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1639 clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, 1640 <&gcc GCC_BLSP1_AHB_CLK>; 1641 clock-names = "core", "iface"; 1642 dmas = <&blsp_dma 8>, <&blsp_dma 9>; 1643 dma-names = "tx", "rx"; 1644 pinctrl-names = "default", "sleep"; 1645 pinctrl-0 = <&spi3_default>; 1646 pinctrl-1 = <&spi3_sleep>; 1647 #address-cells = <1>; 1648 #size-cells = <0>; 1649 status = "disabled"; 1650 }; 1651 1652 blsp_i2c4: i2c@78b8000 { 1653 compatible = "qcom,i2c-qup-v2.2.1"; 1654 reg = <0x078b8000 0x500>; 1655 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1656 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, 1657 <&gcc GCC_BLSP1_AHB_CLK>; 1658 clock-names = "core", "iface"; 1659 pinctrl-names = "default", "sleep"; 1660 pinctrl-0 = <&i2c4_default>; 1661 pinctrl-1 = <&i2c4_sleep>; 1662 #address-cells = <1>; 1663 #size-cells = <0>; 1664 status = "disabled"; 1665 }; 1666 1667 blsp_spi4: spi@78b8000 { 1668 compatible = "qcom,spi-qup-v2.2.1"; 1669 reg = <0x078b8000 0x500>; 1670 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1671 clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, 1672 <&gcc GCC_BLSP1_AHB_CLK>; 1673 clock-names = "core", "iface"; 1674 dmas = <&blsp_dma 10>, <&blsp_dma 11>; 1675 dma-names = "tx", "rx"; 1676 pinctrl-names = "default", "sleep"; 1677 pinctrl-0 = <&spi4_default>; 1678 pinctrl-1 = <&spi4_sleep>; 1679 #address-cells = <1>; 1680 #size-cells = <0>; 1681 status = "disabled"; 1682 }; 1683 1684 blsp_i2c5: i2c@78b9000 { 1685 compatible = "qcom,i2c-qup-v2.2.1"; 1686 reg = <0x078b9000 0x500>; 1687 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1688 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, 1689 <&gcc GCC_BLSP1_AHB_CLK>; 1690 clock-names = "core", "iface"; 1691 pinctrl-names = "default", "sleep"; 1692 pinctrl-0 = <&i2c5_default>; 1693 pinctrl-1 = <&i2c5_sleep>; 1694 #address-cells = <1>; 1695 #size-cells = <0>; 1696 status = "disabled"; 1697 }; 1698 1699 blsp_spi5: spi@78b9000 { 1700 compatible = "qcom,spi-qup-v2.2.1"; 1701 reg = <0x078b9000 0x500>; 1702 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1703 clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, 1704 <&gcc GCC_BLSP1_AHB_CLK>; 1705 clock-names = "core", "iface"; 1706 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 1707 dma-names = "tx", "rx"; 1708 pinctrl-names = "default", "sleep"; 1709 pinctrl-0 = <&spi5_default>; 1710 pinctrl-1 = <&spi5_sleep>; 1711 #address-cells = <1>; 1712 #size-cells = <0>; 1713 status = "disabled"; 1714 }; 1715 1716 blsp_i2c6: i2c@78ba000 { 1717 compatible = "qcom,i2c-qup-v2.2.1"; 1718 reg = <0x078ba000 0x500>; 1719 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 1720 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, 1721 <&gcc GCC_BLSP1_AHB_CLK>; 1722 clock-names = "core", "iface"; 1723 pinctrl-names = "default", "sleep"; 1724 pinctrl-0 = <&i2c6_default>; 1725 pinctrl-1 = <&i2c6_sleep>; 1726 #address-cells = <1>; 1727 #size-cells = <0>; 1728 status = "disabled"; 1729 }; 1730 1731 blsp_spi6: spi@78ba000 { 1732 compatible = "qcom,spi-qup-v2.2.1"; 1733 reg = <0x078ba000 0x500>; 1734 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 1735 clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, 1736 <&gcc GCC_BLSP1_AHB_CLK>; 1737 clock-names = "core", "iface"; 1738 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 1739 dma-names = "tx", "rx"; 1740 pinctrl-names = "default", "sleep"; 1741 pinctrl-0 = <&spi6_default>; 1742 pinctrl-1 = <&spi6_sleep>; 1743 #address-cells = <1>; 1744 #size-cells = <0>; 1745 status = "disabled"; 1746 }; 1747 1748 usb: usb@78d9000 { 1749 compatible = "qcom,ci-hdrc"; 1750 reg = <0x078d9000 0x200>, 1751 <0x078d9200 0x200>; 1752 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 1753 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 1754 clocks = <&gcc GCC_USB_HS_AHB_CLK>, 1755 <&gcc GCC_USB_HS_SYSTEM_CLK>; 1756 clock-names = "iface", "core"; 1757 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; 1758 assigned-clock-rates = <80000000>; 1759 resets = <&gcc GCC_USB_HS_BCR>; 1760 reset-names = "core"; 1761 phy_type = "ulpi"; 1762 dr_mode = "otg"; 1763 hnp-disable; 1764 srp-disable; 1765 adp-disable; 1766 ahb-burst-config = <0>; 1767 phy-names = "usb-phy"; 1768 phys = <&usb_hs_phy>; 1769 status = "disabled"; 1770 #reset-cells = <1>; 1771 1772 ulpi { 1773 usb_hs_phy: phy { 1774 compatible = "qcom,usb-hs-phy-msm8916", 1775 "qcom,usb-hs-phy"; 1776 #phy-cells = <0>; 1777 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 1778 clock-names = "ref", "sleep"; 1779 resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; 1780 reset-names = "phy", "por"; 1781 qcom,init-seq = /bits/ 8 <0x0 0x44>, 1782 <0x1 0x6b>, 1783 <0x2 0x24>, 1784 <0x3 0x13>; 1785 }; 1786 }; 1787 }; 1788 1789 pronto: remoteproc@a21b000 { 1790 compatible = "qcom,pronto-v2-pil", "qcom,pronto"; 1791 reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; 1792 reg-names = "ccu", "dxe", "pmu"; 1793 1794 memory-region = <&wcnss_mem>; 1795 1796 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, 1797 <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1798 <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1799 <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1800 <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1801 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 1802 1803 power-domains = <&rpmpd MSM8916_VDDCX>, 1804 <&rpmpd MSM8916_VDDMX>; 1805 power-domain-names = "cx", "mx"; 1806 1807 qcom,smem-states = <&wcnss_smp2p_out 0>; 1808 qcom,smem-state-names = "stop"; 1809 1810 pinctrl-names = "default"; 1811 pinctrl-0 = <&wcnss_pin_a>; 1812 1813 status = "disabled"; 1814 1815 iris { 1816 compatible = "qcom,wcn3620"; 1817 1818 clocks = <&rpmcc RPM_SMD_RF_CLK2>; 1819 clock-names = "xo"; 1820 }; 1821 1822 smd-edge { 1823 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; 1824 1825 qcom,ipc = <&apcs 8 17>; 1826 qcom,smd-edge = <6>; 1827 qcom,remote-pid = <4>; 1828 1829 label = "pronto"; 1830 1831 wcnss_ctrl: wcnss { 1832 compatible = "qcom,wcnss"; 1833 qcom,smd-channels = "WCNSS_CTRL"; 1834 1835 qcom,mmio = <&pronto>; 1836 1837 bluetooth { 1838 compatible = "qcom,wcnss-bt"; 1839 }; 1840 1841 wifi { 1842 compatible = "qcom,wcnss-wlan"; 1843 1844 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 1845 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 1846 interrupt-names = "tx", "rx"; 1847 1848 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; 1849 qcom,smem-state-names = "tx-enable", "tx-rings-empty"; 1850 }; 1851 }; 1852 }; 1853 }; 1854 1855 intc: interrupt-controller@b000000 { 1856 compatible = "qcom,msm-qgic2"; 1857 interrupt-controller; 1858 #interrupt-cells = <3>; 1859 reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, 1860 <0x0b001000 0x1000>, <0x0b004000 0x2000>; 1861 interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 1862 }; 1863 1864 apcs: mailbox@b011000 { 1865 compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; 1866 reg = <0x0b011000 0x1000>; 1867 #mbox-cells = <1>; 1868 clocks = <&a53pll>, <&gcc GPLL0_VOTE>; 1869 clock-names = "pll", "aux"; 1870 #clock-cells = <0>; 1871 }; 1872 1873 a53pll: clock@b016000 { 1874 compatible = "qcom,msm8916-a53pll"; 1875 reg = <0x0b016000 0x40>; 1876 #clock-cells = <0>; 1877 clocks = <&xo_board>; 1878 clock-names = "xo"; 1879 }; 1880 1881 timer@b020000 { 1882 #address-cells = <1>; 1883 #size-cells = <1>; 1884 ranges; 1885 compatible = "arm,armv7-timer-mem"; 1886 reg = <0x0b020000 0x1000>; 1887 clock-frequency = <19200000>; 1888 1889 frame@b021000 { 1890 frame-number = <0>; 1891 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1892 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1893 reg = <0x0b021000 0x1000>, 1894 <0x0b022000 0x1000>; 1895 }; 1896 1897 frame@b023000 { 1898 frame-number = <1>; 1899 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1900 reg = <0x0b023000 0x1000>; 1901 status = "disabled"; 1902 }; 1903 1904 frame@b024000 { 1905 frame-number = <2>; 1906 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1907 reg = <0x0b024000 0x1000>; 1908 status = "disabled"; 1909 }; 1910 1911 frame@b025000 { 1912 frame-number = <3>; 1913 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1914 reg = <0x0b025000 0x1000>; 1915 status = "disabled"; 1916 }; 1917 1918 frame@b026000 { 1919 frame-number = <4>; 1920 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1921 reg = <0x0b026000 0x1000>; 1922 status = "disabled"; 1923 }; 1924 1925 frame@b027000 { 1926 frame-number = <5>; 1927 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1928 reg = <0x0b027000 0x1000>; 1929 status = "disabled"; 1930 }; 1931 1932 frame@b028000 { 1933 frame-number = <6>; 1934 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1935 reg = <0x0b028000 0x1000>; 1936 status = "disabled"; 1937 }; 1938 }; 1939 1940 cpu0_acc: power-manager@b088000 { 1941 compatible = "qcom,msm8916-acc"; 1942 reg = <0x0b088000 0x1000>; 1943 status = "reserved"; /* Controlled by PSCI firmware */ 1944 }; 1945 1946 cpu0_saw: power-manager@b089000 { 1947 compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; 1948 reg = <0x0b089000 0x1000>; 1949 status = "reserved"; /* Controlled by PSCI firmware */ 1950 }; 1951 1952 cpu1_acc: power-manager@b098000 { 1953 compatible = "qcom,msm8916-acc"; 1954 reg = <0x0b098000 0x1000>; 1955 status = "reserved"; /* Controlled by PSCI firmware */ 1956 }; 1957 1958 cpu1_saw: power-manager@b099000 { 1959 compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; 1960 reg = <0x0b099000 0x1000>; 1961 status = "reserved"; /* Controlled by PSCI firmware */ 1962 }; 1963 1964 cpu2_acc: power-manager@b0a8000 { 1965 compatible = "qcom,msm8916-acc"; 1966 reg = <0x0b0a8000 0x1000>; 1967 status = "reserved"; /* Controlled by PSCI firmware */ 1968 }; 1969 1970 cpu2_saw: power-manager@b0a9000 { 1971 compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; 1972 reg = <0x0b0a9000 0x1000>; 1973 status = "reserved"; /* Controlled by PSCI firmware */ 1974 }; 1975 1976 cpu3_acc: power-manager@b0b8000 { 1977 compatible = "qcom,msm8916-acc"; 1978 reg = <0x0b0b8000 0x1000>; 1979 status = "reserved"; /* Controlled by PSCI firmware */ 1980 }; 1981 1982 cpu3_saw: power-manager@b0b9000 { 1983 compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; 1984 reg = <0x0b0b9000 0x1000>; 1985 status = "reserved"; /* Controlled by PSCI firmware */ 1986 }; 1987 }; 1988 1989 thermal-zones { 1990 cpu0-1-thermal { 1991 polling-delay-passive = <250>; 1992 polling-delay = <1000>; 1993 1994 thermal-sensors = <&tsens 5>; 1995 1996 trips { 1997 cpu0_1_alert0: trip-point0 { 1998 temperature = <75000>; 1999 hysteresis = <2000>; 2000 type = "passive"; 2001 }; 2002 cpu0_1_crit: cpu_crit { 2003 temperature = <110000>; 2004 hysteresis = <2000>; 2005 type = "critical"; 2006 }; 2007 }; 2008 2009 cooling-maps { 2010 map0 { 2011 trip = <&cpu0_1_alert0>; 2012 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2013 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2014 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2015 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2016 }; 2017 }; 2018 }; 2019 2020 cpu2-3-thermal { 2021 polling-delay-passive = <250>; 2022 polling-delay = <1000>; 2023 2024 thermal-sensors = <&tsens 4>; 2025 2026 trips { 2027 cpu2_3_alert0: trip-point0 { 2028 temperature = <75000>; 2029 hysteresis = <2000>; 2030 type = "passive"; 2031 }; 2032 cpu2_3_crit: cpu_crit { 2033 temperature = <110000>; 2034 hysteresis = <2000>; 2035 type = "critical"; 2036 }; 2037 }; 2038 2039 cooling-maps { 2040 map0 { 2041 trip = <&cpu2_3_alert0>; 2042 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2043 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2044 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2045 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2046 }; 2047 }; 2048 }; 2049 2050 gpu-thermal { 2051 polling-delay-passive = <250>; 2052 polling-delay = <1000>; 2053 2054 thermal-sensors = <&tsens 2>; 2055 2056 trips { 2057 gpu_alert0: trip-point0 { 2058 temperature = <75000>; 2059 hysteresis = <2000>; 2060 type = "passive"; 2061 }; 2062 gpu_crit: gpu_crit { 2063 temperature = <95000>; 2064 hysteresis = <2000>; 2065 type = "critical"; 2066 }; 2067 }; 2068 }; 2069 2070 camera-thermal { 2071 polling-delay-passive = <250>; 2072 polling-delay = <1000>; 2073 2074 thermal-sensors = <&tsens 1>; 2075 2076 trips { 2077 cam_alert0: trip-point0 { 2078 temperature = <75000>; 2079 hysteresis = <2000>; 2080 type = "hot"; 2081 }; 2082 }; 2083 }; 2084 2085 modem-thermal { 2086 polling-delay-passive = <250>; 2087 polling-delay = <1000>; 2088 2089 thermal-sensors = <&tsens 0>; 2090 2091 trips { 2092 modem_alert0: trip-point0 { 2093 temperature = <85000>; 2094 hysteresis = <2000>; 2095 type = "hot"; 2096 }; 2097 }; 2098 }; 2099 2100 }; 2101 2102 timer { 2103 compatible = "arm,armv8-timer"; 2104 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2105 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2106 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2107 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 2108 }; 2109}; 2110 2111#include "msm8916-pins.dtsi" 2112