xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8916.dtsi (revision b96fc2f3)
1/*
2 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11 * GNU General Public License for more details.
12 */
13
14#include <dt-bindings/interrupt-controller/arm-gic.h>
15#include <dt-bindings/clock/qcom,gcc-msm8916.h>
16#include <dt-bindings/reset/qcom,gcc-msm8916.h>
17
18/ {
19	model = "Qualcomm Technologies, Inc. MSM8916";
20	compatible = "qcom,msm8916";
21
22	interrupt-parent = <&intc>;
23
24	#address-cells = <2>;
25	#size-cells = <2>;
26
27	aliases {
28		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
29		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
30	};
31
32	chosen { };
33
34	memory {
35		device_type = "memory";
36		/* We expect the bootloader to fill in the reg */
37		reg = <0 0 0 0>;
38	};
39
40	cpus {
41		#address-cells = <1>;
42		#size-cells = <0>;
43
44		CPU0: cpu@0 {
45			device_type = "cpu";
46			compatible = "arm,cortex-a53", "arm,armv8";
47			reg = <0x0>;
48		};
49
50		CPU1: cpu@1 {
51			device_type = "cpu";
52			compatible = "arm,cortex-a53", "arm,armv8";
53			reg = <0x1>;
54		};
55
56		CPU2: cpu@2 {
57			device_type = "cpu";
58			compatible = "arm,cortex-a53", "arm,armv8";
59			reg = <0x2>;
60		};
61
62		CPU3: cpu@3 {
63			device_type = "cpu";
64			compatible = "arm,cortex-a53", "arm,armv8";
65			reg = <0x3>;
66		};
67	};
68
69	timer {
70		compatible = "arm,armv8-timer";
71		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
72			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
73			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
74			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
75	};
76
77	soc: soc {
78		#address-cells = <1>;
79		#size-cells = <1>;
80		ranges = <0 0 0 0xffffffff>;
81		compatible = "simple-bus";
82
83		restart@4ab000 {
84			compatible = "qcom,pshold";
85			reg = <0x4ab000 0x4>;
86		};
87
88		msmgpio: pinctrl@1000000 {
89			compatible = "qcom,msm8916-pinctrl";
90			reg = <0x1000000 0x300000>;
91			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
92			gpio-controller;
93			#gpio-cells = <2>;
94			interrupt-controller;
95			#interrupt-cells = <2>;
96		};
97
98		gcc: qcom,gcc@1800000 {
99			compatible = "qcom,gcc-msm8916";
100			#clock-cells = <1>;
101			#reset-cells = <1>;
102			reg = <0x1800000 0x80000>;
103		};
104
105		blsp1_uart2: serial@78b0000 {
106			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
107			reg = <0x78b0000 0x200>;
108			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
109			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
110			clock-names = "core", "iface";
111			status = "disabled";
112		};
113
114		blsp_dma: dma@7884000 {
115			compatible = "qcom,bam-v1.7.0";
116			reg = <0x07884000 0x23000>;
117			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
118			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
119			clock-names = "bam_clk";
120			#dma-cells = <1>;
121			qcom,ee = <0>;
122			status = "disabled";
123		};
124
125		blsp_spi1: spi@78b5000 {
126			compatible = "qcom,spi-qup-v2.2.1";
127			reg = <0x078b5000 0x600>;
128			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
129			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
130				 <&gcc GCC_BLSP1_AHB_CLK>;
131			clock-names = "core", "iface";
132			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
133			dma-names = "rx", "tx";
134			pinctrl-names = "default", "sleep";
135			pinctrl-0 = <&spi1_default>;
136			pinctrl-1 = <&spi1_sleep>;
137			#address-cells = <1>;
138			#size-cells = <0>;
139			status = "disabled";
140		};
141
142		blsp_spi2: spi@78b6000 {
143			compatible = "qcom,spi-qup-v2.2.1";
144			reg = <0x078b6000 0x600>;
145			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
146			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
147				 <&gcc GCC_BLSP1_AHB_CLK>;
148			clock-names = "core", "iface";
149			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
150			dma-names = "rx", "tx";
151			pinctrl-names = "default", "sleep";
152			pinctrl-0 = <&spi2_default>;
153			pinctrl-1 = <&spi2_sleep>;
154			#address-cells = <1>;
155			#size-cells = <0>;
156			status = "disabled";
157		};
158
159		blsp_spi3: spi@78b7000 {
160			compatible = "qcom,spi-qup-v2.2.1";
161			reg = <0x078b7000 0x600>;
162			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
163			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
164				 <&gcc GCC_BLSP1_AHB_CLK>;
165			clock-names = "core", "iface";
166			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
167			dma-names = "rx", "tx";
168			pinctrl-names = "default", "sleep";
169			pinctrl-0 = <&spi3_default>;
170			pinctrl-1 = <&spi3_sleep>;
171			#address-cells = <1>;
172			#size-cells = <0>;
173			status = "disabled";
174		};
175
176		blsp_spi4: spi@78b8000 {
177			compatible = "qcom,spi-qup-v2.2.1";
178			reg = <0x078b8000 0x600>;
179			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
180			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
181				 <&gcc GCC_BLSP1_AHB_CLK>;
182			clock-names = "core", "iface";
183			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
184			dma-names = "rx", "tx";
185			pinctrl-names = "default", "sleep";
186			pinctrl-0 = <&spi4_default>;
187			pinctrl-1 = <&spi4_sleep>;
188			#address-cells = <1>;
189			#size-cells = <0>;
190			status = "disabled";
191		};
192
193		blsp_spi5: spi@78b9000 {
194			compatible = "qcom,spi-qup-v2.2.1";
195			reg = <0x078b9000 0x600>;
196			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
197			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
198				 <&gcc GCC_BLSP1_AHB_CLK>;
199			clock-names = "core", "iface";
200			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
201			dma-names = "rx", "tx";
202			pinctrl-names = "default", "sleep";
203			pinctrl-0 = <&spi5_default>;
204			pinctrl-1 = <&spi5_sleep>;
205			#address-cells = <1>;
206			#size-cells = <0>;
207			status = "disabled";
208		};
209
210		blsp_spi6: spi@78ba000 {
211			compatible = "qcom,spi-qup-v2.2.1";
212			reg = <0x078ba000 0x600>;
213			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
214			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
215				 <&gcc GCC_BLSP1_AHB_CLK>;
216			clock-names = "core", "iface";
217			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
218			dma-names = "rx", "tx";
219			pinctrl-names = "default", "sleep";
220			pinctrl-0 = <&spi6_default>;
221			pinctrl-1 = <&spi6_sleep>;
222			#address-cells = <1>;
223			#size-cells = <0>;
224			status = "disabled";
225		};
226
227		blsp_i2c4: i2c@78b8000 {
228			compatible = "qcom,i2c-qup-v2.2.1";
229			reg = <0x78b8000 0x1000>;
230			interrupts = <GIC_SPI 98 0>;
231			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
232				<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
233			clock-names = "iface", "core";
234			pinctrl-names = "default", "sleep";
235			pinctrl-0 = <&i2c4_default>;
236			pinctrl-1 = <&i2c4_sleep>;
237			#address-cells = <1>;
238			#size-cells = <0>;
239			status = "disabled";
240		};
241
242		sdhc_1: sdhci@07824000 {
243			compatible = "qcom,sdhci-msm-v4";
244			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
245			reg-names = "hc_mem", "core_mem";
246
247			interrupts = <0 123 0>, <0 138 0>;
248			interrupt-names = "hc_irq", "pwr_irq";
249			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
250				 <&gcc GCC_SDCC1_AHB_CLK>;
251			clock-names = "core", "iface";
252			bus-width = <8>;
253			non-removable;
254			status = "disabled";
255		};
256
257		sdhc_2: sdhci@07864000 {
258			compatible = "qcom,sdhci-msm-v4";
259			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
260			reg-names = "hc_mem", "core_mem";
261
262			interrupts = <0 125 0>, <0 221 0>;
263			interrupt-names = "hc_irq", "pwr_irq";
264			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
265				 <&gcc GCC_SDCC2_AHB_CLK>;
266			clock-names = "core", "iface";
267			bus-width = <4>;
268			status = "disabled";
269		};
270
271		usb_dev: usb@78d9000 {
272			compatible = "qcom,ci-hdrc";
273			reg = <0x78d9000 0x400>;
274			dr_mode = "peripheral";
275			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
276			usb-phy = <&usb_otg>;
277			status = "disabled";
278		};
279
280		usb_host: ehci@78d9000 {
281			compatible = "qcom,ehci-host";
282			reg = <0x78d9000 0x400>;
283			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
284			usb-phy = <&usb_otg>;
285			status = "disabled";
286		};
287
288		usb_otg: phy@78d9000 {
289			compatible = "qcom,usb-otg-snps";
290			reg = <0x78d9000 0x400>;
291			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
292				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
293
294			qcom,vdd-levels = <1 5 7>;
295			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
296			dr_mode = "peripheral";
297			qcom,otg-control = <2>; // PMIC
298
299			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
300				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
301				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
302			clock-names = "iface", "core", "sleep";
303
304			resets = <&gcc GCC_USB2A_PHY_BCR>,
305				 <&gcc GCC_USB_HS_BCR>;
306			reset-names = "phy", "link";
307			status = "disabled";
308		};
309
310		intc: interrupt-controller@b000000 {
311			compatible = "qcom,msm-qgic2";
312			interrupt-controller;
313			#interrupt-cells = <3>;
314			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
315		};
316
317		timer@b020000 {
318			#address-cells = <1>;
319			#size-cells = <1>;
320			ranges;
321			compatible = "arm,armv7-timer-mem";
322			reg = <0xb020000 0x1000>;
323			clock-frequency = <19200000>;
324
325			frame@b021000 {
326				frame-number = <0>;
327				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
328					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
329				reg = <0xb021000 0x1000>,
330				      <0xb022000 0x1000>;
331			};
332
333			frame@b023000 {
334				frame-number = <1>;
335				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
336				reg = <0xb023000 0x1000>;
337				status = "disabled";
338			};
339
340			frame@b024000 {
341				frame-number = <2>;
342				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
343				reg = <0xb024000 0x1000>;
344				status = "disabled";
345			};
346
347			frame@b025000 {
348				frame-number = <3>;
349				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
350				reg = <0xb025000 0x1000>;
351				status = "disabled";
352			};
353
354			frame@b026000 {
355				frame-number = <4>;
356				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
357				reg = <0xb026000 0x1000>;
358				status = "disabled";
359			};
360
361			frame@b027000 {
362				frame-number = <5>;
363				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
364				reg = <0xb027000 0x1000>;
365				status = "disabled";
366			};
367
368			frame@b028000 {
369				frame-number = <6>;
370				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
371				reg = <0xb028000 0x1000>;
372				status = "disabled";
373			};
374		};
375
376		spmi_bus: spmi@200f000 {
377			compatible = "qcom,spmi-pmic-arb";
378			reg = <0x200f000 0x001000>,
379			      <0x2400000 0x400000>,
380			      <0x2c00000 0x400000>,
381			      <0x3800000 0x200000>,
382			      <0x200a000 0x002100>;
383			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
384			interrupt-names = "periph_irq";
385			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
386			qcom,ee = <0>;
387			qcom,channel = <0>;
388			#address-cells = <2>;
389			#size-cells = <0>;
390			interrupt-controller;
391			#interrupt-cells = <4>;
392		};
393	};
394};
395
396#include "msm8916-pins.dtsi"
397