xref: /openbmc/linux/arch/arm64/boot/dts/qcom/msm8916.dtsi (revision 82e8d723)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
4 */
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/qcom,gcc-msm8916.h>
8#include <dt-bindings/reset/qcom,gcc-msm8916.h>
9#include <dt-bindings/clock/qcom,rpmcc.h>
10#include <dt-bindings/thermal/thermal.h>
11
12/ {
13	interrupt-parent = <&intc>;
14
15	#address-cells = <2>;
16	#size-cells = <2>;
17
18	aliases {
19		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
20		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
21	};
22
23	chosen { };
24
25	memory {
26		device_type = "memory";
27		/* We expect the bootloader to fill in the reg */
28		reg = <0 0 0 0>;
29	};
30
31	reserved-memory {
32		#address-cells = <2>;
33		#size-cells = <2>;
34		ranges;
35
36		tz-apps@86000000 {
37			reg = <0x0 0x86000000 0x0 0x300000>;
38			no-map;
39		};
40
41		smem_mem: smem_region@86300000 {
42			reg = <0x0 0x86300000 0x0 0x100000>;
43			no-map;
44		};
45
46		hypervisor@86400000 {
47			reg = <0x0 0x86400000 0x0 0x100000>;
48			no-map;
49		};
50
51		tz@86500000 {
52			reg = <0x0 0x86500000 0x0 0x180000>;
53			no-map;
54		};
55
56		reserved@8668000 {
57			reg = <0x0 0x86680000 0x0 0x80000>;
58			no-map;
59		};
60
61		rmtfs@86700000 {
62			compatible = "qcom,rmtfs-mem";
63			reg = <0x0 0x86700000 0x0 0xe0000>;
64			no-map;
65
66			qcom,client-id = <1>;
67		};
68
69		rfsa@867e00000 {
70			reg = <0x0 0x867e0000 0x0 0x20000>;
71			no-map;
72		};
73
74		mpss_mem: mpss@86800000 {
75			reg = <0x0 0x86800000 0x0 0x2b00000>;
76			no-map;
77		};
78
79		wcnss_mem: wcnss@89300000 {
80			reg = <0x0 0x89300000 0x0 0x600000>;
81			no-map;
82		};
83
84		venus_mem: venus@89900000 {
85			reg = <0x0 0x89900000 0x0 0x600000>;
86			no-map;
87		};
88
89		mba_mem: mba@8ea00000 {
90			no-map;
91			reg = <0 0x8ea00000 0 0x100000>;
92		};
93	};
94
95	cpus {
96		#address-cells = <1>;
97		#size-cells = <0>;
98
99		CPU0: cpu@0 {
100			device_type = "cpu";
101			compatible = "arm,cortex-a53";
102			reg = <0x0>;
103			next-level-cache = <&L2_0>;
104			enable-method = "psci";
105			cpu-idle-states = <&CPU_SLEEP_0>;
106			clocks = <&apcs>;
107			operating-points-v2 = <&cpu_opp_table>;
108			#cooling-cells = <2>;
109		};
110
111		CPU1: cpu@1 {
112			device_type = "cpu";
113			compatible = "arm,cortex-a53";
114			reg = <0x1>;
115			next-level-cache = <&L2_0>;
116			enable-method = "psci";
117			cpu-idle-states = <&CPU_SLEEP_0>;
118			clocks = <&apcs>;
119			operating-points-v2 = <&cpu_opp_table>;
120			#cooling-cells = <2>;
121		};
122
123		CPU2: cpu@2 {
124			device_type = "cpu";
125			compatible = "arm,cortex-a53";
126			reg = <0x2>;
127			next-level-cache = <&L2_0>;
128			enable-method = "psci";
129			cpu-idle-states = <&CPU_SLEEP_0>;
130			clocks = <&apcs>;
131			operating-points-v2 = <&cpu_opp_table>;
132			#cooling-cells = <2>;
133		};
134
135		CPU3: cpu@3 {
136			device_type = "cpu";
137			compatible = "arm,cortex-a53";
138			reg = <0x3>;
139			next-level-cache = <&L2_0>;
140			enable-method = "psci";
141			cpu-idle-states = <&CPU_SLEEP_0>;
142			clocks = <&apcs>;
143			operating-points-v2 = <&cpu_opp_table>;
144			#cooling-cells = <2>;
145		};
146
147		L2_0: l2-cache {
148		      compatible = "cache";
149		      cache-level = <2>;
150		};
151
152		idle-states {
153			entry-method = "psci";
154
155			CPU_SLEEP_0: cpu-sleep-0 {
156				compatible = "arm,idle-state";
157				idle-state-name = "standalone-power-collapse";
158				arm,psci-suspend-param = <0x40000002>;
159				entry-latency-us = <130>;
160				exit-latency-us = <150>;
161				min-residency-us = <2000>;
162				local-timer-stop;
163			};
164		};
165	};
166
167	psci {
168		compatible = "arm,psci-1.0";
169		method = "smc";
170	};
171
172	pmu {
173		compatible = "arm,cortex-a53-pmu";
174		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
175	};
176
177	thermal-zones {
178		cpu0_1-thermal {
179			polling-delay-passive = <250>;
180			polling-delay = <1000>;
181
182			thermal-sensors = <&tsens 4>;
183
184			trips {
185				cpu0_1_alert0: trip-point@0 {
186					temperature = <75000>;
187					hysteresis = <2000>;
188					type = "passive";
189				};
190				cpu0_1_crit: cpu_crit {
191					temperature = <110000>;
192					hysteresis = <2000>;
193					type = "critical";
194				};
195			};
196
197			cooling-maps {
198				map0 {
199					trip = <&cpu0_1_alert0>;
200					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
201							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
202							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
203							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
204				};
205			};
206		};
207
208		cpu2_3-thermal {
209			polling-delay-passive = <250>;
210			polling-delay = <1000>;
211
212			thermal-sensors = <&tsens 3>;
213
214			trips {
215				cpu2_3_alert0: trip-point@0 {
216					temperature = <75000>;
217					hysteresis = <2000>;
218					type = "passive";
219				};
220				cpu2_3_crit: cpu_crit {
221					temperature = <110000>;
222					hysteresis = <2000>;
223					type = "critical";
224				};
225			};
226
227			cooling-maps {
228				map0 {
229					trip = <&cpu2_3_alert0>;
230					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
231							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
232							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
233							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
234				};
235			};
236		};
237
238		gpu-thermal {
239			polling-delay-passive = <250>;
240			polling-delay = <1000>;
241
242			thermal-sensors = <&tsens 2>;
243
244			trips {
245				gpu_alert0: trip-point@0 {
246					temperature = <75000>;
247					hysteresis = <2000>;
248					type = "passive";
249				};
250				gpu_crit: gpu_crit {
251					temperature = <95000>;
252					hysteresis = <2000>;
253					type = "critical";
254				};
255			};
256		};
257
258		camera-thermal {
259			polling-delay-passive = <250>;
260			polling-delay = <1000>;
261
262			thermal-sensors = <&tsens 1>;
263
264			trips {
265				cam_alert0: trip-point@0 {
266					temperature = <75000>;
267					hysteresis = <2000>;
268					type = "hot";
269				};
270			};
271		};
272
273		modem-thermal {
274			polling-delay-passive = <250>;
275			polling-delay = <1000>;
276
277			thermal-sensors = <&tsens 0>;
278
279			trips {
280				modem_alert0: trip-point@0 {
281					temperature = <85000>;
282					hysteresis = <2000>;
283					type = "hot";
284				};
285			};
286		};
287
288	};
289
290	cpu_opp_table: cpu_opp_table {
291		compatible = "operating-points-v2";
292		opp-shared;
293
294		opp-200000000 {
295			opp-hz = /bits/ 64 <200000000>;
296		};
297		opp-400000000 {
298			opp-hz = /bits/ 64 <400000000>;
299		};
300		opp-800000000 {
301			opp-hz = /bits/ 64 <800000000>;
302		};
303		opp-998400000 {
304			opp-hz = /bits/ 64 <998400000>;
305		};
306	};
307
308	gpu_opp_table: opp_table {
309		compatible = "operating-points-v2";
310
311		opp-400000000 {
312			opp-hz = /bits/ 64 <400000000>;
313		};
314		opp-19200000 {
315			opp-hz = /bits/ 64 <19200000>;
316		};
317	};
318
319	timer {
320		compatible = "arm,armv8-timer";
321		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
322			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
323			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
324			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
325	};
326
327	clocks {
328		xo_board: xo_board {
329			compatible = "fixed-clock";
330			#clock-cells = <0>;
331			clock-frequency = <19200000>;
332		};
333
334		sleep_clk: sleep_clk {
335			compatible = "fixed-clock";
336			#clock-cells = <0>;
337			clock-frequency = <32768>;
338		};
339	};
340
341	smem {
342		compatible = "qcom,smem";
343
344		memory-region = <&smem_mem>;
345		qcom,rpm-msg-ram = <&rpm_msg_ram>;
346
347		hwlocks = <&tcsr_mutex 3>;
348	};
349
350	firmware {
351		scm: scm {
352			compatible = "qcom,scm";
353			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
354			clock-names = "core", "bus", "iface";
355			#reset-cells = <1>;
356
357			qcom,dload-mode = <&tcsr 0x6100>;
358		};
359	};
360
361	soc: soc {
362		#address-cells = <1>;
363		#size-cells = <1>;
364		ranges = <0 0 0 0xffffffff>;
365		compatible = "simple-bus";
366
367		restart@4ab000 {
368			compatible = "qcom,pshold";
369			reg = <0x4ab000 0x4>;
370		};
371
372		msmgpio: pinctrl@1000000 {
373			compatible = "qcom,msm8916-pinctrl";
374			reg = <0x1000000 0x300000>;
375			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
376			gpio-controller;
377			#gpio-cells = <2>;
378			interrupt-controller;
379			#interrupt-cells = <2>;
380		};
381
382		gcc: clock-controller@1800000 {
383			compatible = "qcom,gcc-msm8916";
384			#clock-cells = <1>;
385			#reset-cells = <1>;
386			#power-domain-cells = <1>;
387			reg = <0x1800000 0x80000>;
388		};
389
390		tcsr_mutex_regs: syscon@1905000 {
391			compatible = "syscon";
392			reg = <0x1905000 0x20000>;
393		};
394
395		tcsr: syscon@1937000 {
396			compatible = "qcom,tcsr-msm8916", "syscon";
397			reg = <0x1937000 0x30000>;
398		};
399
400		tcsr_mutex: hwlock {
401			compatible = "qcom,tcsr-mutex";
402			syscon = <&tcsr_mutex_regs 0 0x1000>;
403			#hwlock-cells = <1>;
404		};
405
406		rpm_msg_ram: memory@60000 {
407			compatible = "qcom,rpm-msg-ram";
408			reg = <0x60000 0x8000>;
409		};
410
411		blsp1_uart1: serial@78af000 {
412			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
413			reg = <0x78af000 0x200>;
414			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
415			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
416			clock-names = "core", "iface";
417			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
418			dma-names = "rx", "tx";
419			status = "disabled";
420		};
421
422		a53pll: clock@b016000 {
423			compatible = "qcom,msm8916-a53pll";
424			reg = <0xb016000 0x40>;
425			#clock-cells = <0>;
426		};
427
428		apcs: mailbox@b011000 {
429			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
430			reg = <0xb011000 0x1000>;
431			#mbox-cells = <1>;
432			clocks = <&a53pll>;
433			#clock-cells = <0>;
434		};
435
436		blsp1_uart2: serial@78b0000 {
437			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
438			reg = <0x78b0000 0x200>;
439			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
440			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
441			clock-names = "core", "iface";
442			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
443			dma-names = "rx", "tx";
444			status = "disabled";
445		};
446
447		blsp_dma: dma@7884000 {
448			compatible = "qcom,bam-v1.7.0";
449			reg = <0x07884000 0x23000>;
450			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
451			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
452			clock-names = "bam_clk";
453			#dma-cells = <1>;
454			qcom,ee = <0>;
455			status = "disabled";
456		};
457
458		blsp_spi1: spi@78b5000 {
459			compatible = "qcom,spi-qup-v2.2.1";
460			reg = <0x078b5000 0x500>;
461			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
462			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
463				 <&gcc GCC_BLSP1_AHB_CLK>;
464			clock-names = "core", "iface";
465			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
466			dma-names = "rx", "tx";
467			pinctrl-names = "default", "sleep";
468			pinctrl-0 = <&spi1_default>;
469			pinctrl-1 = <&spi1_sleep>;
470			#address-cells = <1>;
471			#size-cells = <0>;
472			status = "disabled";
473		};
474
475		blsp_spi2: spi@78b6000 {
476			compatible = "qcom,spi-qup-v2.2.1";
477			reg = <0x078b6000 0x500>;
478			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
479			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
480				 <&gcc GCC_BLSP1_AHB_CLK>;
481			clock-names = "core", "iface";
482			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
483			dma-names = "rx", "tx";
484			pinctrl-names = "default", "sleep";
485			pinctrl-0 = <&spi2_default>;
486			pinctrl-1 = <&spi2_sleep>;
487			#address-cells = <1>;
488			#size-cells = <0>;
489			status = "disabled";
490		};
491
492		blsp_spi3: spi@78b7000 {
493			compatible = "qcom,spi-qup-v2.2.1";
494			reg = <0x078b7000 0x500>;
495			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
496			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
497				 <&gcc GCC_BLSP1_AHB_CLK>;
498			clock-names = "core", "iface";
499			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
500			dma-names = "rx", "tx";
501			pinctrl-names = "default", "sleep";
502			pinctrl-0 = <&spi3_default>;
503			pinctrl-1 = <&spi3_sleep>;
504			#address-cells = <1>;
505			#size-cells = <0>;
506			status = "disabled";
507		};
508
509		blsp_spi4: spi@78b8000 {
510			compatible = "qcom,spi-qup-v2.2.1";
511			reg = <0x078b8000 0x500>;
512			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
513			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
514				 <&gcc GCC_BLSP1_AHB_CLK>;
515			clock-names = "core", "iface";
516			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
517			dma-names = "rx", "tx";
518			pinctrl-names = "default", "sleep";
519			pinctrl-0 = <&spi4_default>;
520			pinctrl-1 = <&spi4_sleep>;
521			#address-cells = <1>;
522			#size-cells = <0>;
523			status = "disabled";
524		};
525
526		blsp_spi5: spi@78b9000 {
527			compatible = "qcom,spi-qup-v2.2.1";
528			reg = <0x078b9000 0x500>;
529			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
530			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
531				 <&gcc GCC_BLSP1_AHB_CLK>;
532			clock-names = "core", "iface";
533			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
534			dma-names = "rx", "tx";
535			pinctrl-names = "default", "sleep";
536			pinctrl-0 = <&spi5_default>;
537			pinctrl-1 = <&spi5_sleep>;
538			#address-cells = <1>;
539			#size-cells = <0>;
540			status = "disabled";
541		};
542
543		blsp_spi6: spi@78ba000 {
544			compatible = "qcom,spi-qup-v2.2.1";
545			reg = <0x078ba000 0x500>;
546			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
547			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
548				 <&gcc GCC_BLSP1_AHB_CLK>;
549			clock-names = "core", "iface";
550			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
551			dma-names = "rx", "tx";
552			pinctrl-names = "default", "sleep";
553			pinctrl-0 = <&spi6_default>;
554			pinctrl-1 = <&spi6_sleep>;
555			#address-cells = <1>;
556			#size-cells = <0>;
557			status = "disabled";
558		};
559
560		blsp_i2c2: i2c@78b6000 {
561			compatible = "qcom,i2c-qup-v2.2.1";
562			reg = <0x078b6000 0x500>;
563			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
564			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
565				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
566			clock-names = "iface", "core";
567			pinctrl-names = "default", "sleep";
568			pinctrl-0 = <&i2c2_default>;
569			pinctrl-1 = <&i2c2_sleep>;
570			#address-cells = <1>;
571			#size-cells = <0>;
572			status = "disabled";
573		};
574
575		blsp_i2c4: i2c@78b8000 {
576			compatible = "qcom,i2c-qup-v2.2.1";
577			reg = <0x078b8000 0x500>;
578			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
579			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
580				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
581			clock-names = "iface", "core";
582			pinctrl-names = "default", "sleep";
583			pinctrl-0 = <&i2c4_default>;
584			pinctrl-1 = <&i2c4_sleep>;
585			#address-cells = <1>;
586			#size-cells = <0>;
587			status = "disabled";
588		};
589
590		blsp_i2c6: i2c@78ba000 {
591			compatible = "qcom,i2c-qup-v2.2.1";
592			reg = <0x078ba000 0x500>;
593			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
594			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
595				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
596			clock-names = "iface", "core";
597			pinctrl-names = "default", "sleep";
598			pinctrl-0 = <&i2c6_default>;
599			pinctrl-1 = <&i2c6_sleep>;
600			#address-cells = <1>;
601			#size-cells = <0>;
602			status = "disabled";
603		};
604
605		lpass: lpass@7708000 {
606			status = "disabled";
607			compatible = "qcom,lpass-cpu-apq8016";
608			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
609				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
610				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
611				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
612				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
613				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
614				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
615
616			clock-names = "ahbix-clk",
617					"pcnoc-mport-clk",
618					"pcnoc-sway-clk",
619					"mi2s-bit-clk0",
620					"mi2s-bit-clk1",
621					"mi2s-bit-clk2",
622					"mi2s-bit-clk3";
623			#sound-dai-cells = <1>;
624
625			interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
626			interrupt-names = "lpass-irq-lpaif";
627			reg = <0x07708000 0x10000>;
628			reg-names = "lpass-lpaif";
629		};
630
631                lpass_codec: codec{
632			compatible = "qcom,msm8916-wcd-digital-codec";
633			reg = <0x0771c000 0x400>;
634			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
635				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
636			clock-names = "ahbix-clk", "mclk";
637			#sound-dai-cells = <1>;
638                };
639
640		sdhc_1: sdhci@7824000 {
641			compatible = "qcom,sdhci-msm-v4";
642			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
643			reg-names = "hc_mem", "core_mem";
644
645			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
646			interrupt-names = "hc_irq", "pwr_irq";
647			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
648				 <&gcc GCC_SDCC1_AHB_CLK>,
649				 <&xo_board>;
650			clock-names = "core", "iface", "xo";
651			mmc-ddr-1_8v;
652			bus-width = <8>;
653			non-removable;
654			status = "disabled";
655		};
656
657		sdhc_2: sdhci@7864000 {
658			compatible = "qcom,sdhci-msm-v4";
659			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
660			reg-names = "hc_mem", "core_mem";
661
662			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
663			interrupt-names = "hc_irq", "pwr_irq";
664			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
665				 <&gcc GCC_SDCC2_AHB_CLK>,
666				 <&xo_board>;
667			clock-names = "core", "iface", "xo";
668			bus-width = <4>;
669			status = "disabled";
670		};
671
672		otg: usb@78d9000 {
673			compatible = "qcom,ci-hdrc";
674			reg = <0x78d9000 0x200>,
675			      <0x78d9200 0x200>;
676			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
677				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
678			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
679				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
680			clock-names = "iface", "core";
681			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
682			assigned-clock-rates = <80000000>;
683			resets = <&gcc GCC_USB_HS_BCR>;
684			reset-names = "core";
685			phy_type = "ulpi";
686			dr_mode = "otg";
687			ahb-burst-config = <0>;
688			phy-names = "usb-phy";
689			phys = <&usb_hs_phy>;
690			status = "disabled";
691			#reset-cells = <1>;
692
693			ulpi {
694				usb_hs_phy: phy {
695					compatible = "qcom,usb-hs-phy-msm8916",
696						     "qcom,usb-hs-phy";
697					#phy-cells = <0>;
698					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
699					clock-names = "ref", "sleep";
700					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
701					reset-names = "phy", "por";
702					qcom,init-seq = /bits/ 8 <0x0 0x44
703						0x1 0x6b 0x2 0x24 0x3 0x13>;
704				};
705			};
706		};
707
708		intc: interrupt-controller@b000000 {
709			compatible = "qcom,msm-qgic2";
710			interrupt-controller;
711			#interrupt-cells = <3>;
712			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
713		};
714
715		timer@b020000 {
716			#address-cells = <1>;
717			#size-cells = <1>;
718			ranges;
719			compatible = "arm,armv7-timer-mem";
720			reg = <0xb020000 0x1000>;
721			clock-frequency = <19200000>;
722
723			frame@b021000 {
724				frame-number = <0>;
725				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
726					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
727				reg = <0xb021000 0x1000>,
728				      <0xb022000 0x1000>;
729			};
730
731			frame@b023000 {
732				frame-number = <1>;
733				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
734				reg = <0xb023000 0x1000>;
735				status = "disabled";
736			};
737
738			frame@b024000 {
739				frame-number = <2>;
740				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
741				reg = <0xb024000 0x1000>;
742				status = "disabled";
743			};
744
745			frame@b025000 {
746				frame-number = <3>;
747				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
748				reg = <0xb025000 0x1000>;
749				status = "disabled";
750			};
751
752			frame@b026000 {
753				frame-number = <4>;
754				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
755				reg = <0xb026000 0x1000>;
756				status = "disabled";
757			};
758
759			frame@b027000 {
760				frame-number = <5>;
761				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
762				reg = <0xb027000 0x1000>;
763				status = "disabled";
764			};
765
766			frame@b028000 {
767				frame-number = <6>;
768				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
769				reg = <0xb028000 0x1000>;
770				status = "disabled";
771			};
772		};
773
774		spmi_bus: spmi@200f000 {
775			compatible = "qcom,spmi-pmic-arb";
776			reg = <0x200f000 0x001000>,
777			      <0x2400000 0x400000>,
778			      <0x2c00000 0x400000>,
779			      <0x3800000 0x200000>,
780			      <0x200a000 0x002100>;
781			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
782			interrupt-names = "periph_irq";
783			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
784			qcom,ee = <0>;
785			qcom,channel = <0>;
786			#address-cells = <2>;
787			#size-cells = <0>;
788			interrupt-controller;
789			#interrupt-cells = <4>;
790		};
791
792		rng@22000 {
793			compatible = "qcom,prng";
794			reg = <0x00022000 0x200>;
795			clocks = <&gcc GCC_PRNG_AHB_CLK>;
796			clock-names = "core";
797		};
798
799		qfprom: qfprom@5c000 {
800			compatible = "qcom,qfprom";
801			reg = <0x5c000 0x1000>;
802			#address-cells = <1>;
803			#size-cells = <1>;
804			tsens_caldata: caldata@d0 {
805				reg = <0xd0 0x8>;
806			};
807			tsens_calsel: calsel@ec {
808				reg = <0xec 0x4>;
809			};
810		};
811
812		tsens: thermal-sensor@4a9000 {
813			compatible = "qcom,msm8916-tsens";
814			reg = <0x4a9000 0x1000>, /* TM */
815			      <0x4a8000 0x1000>; /* SROT */
816			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
817			nvmem-cell-names = "calib", "calib_sel";
818			#qcom,sensors = <5>;
819			#thermal-sensor-cells = <1>;
820		};
821
822		apps_iommu: iommu@1ef0000 {
823			#address-cells = <1>;
824			#size-cells = <1>;
825			#iommu-cells = <1>;
826			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
827			ranges = <0 0x1e20000 0x40000>;
828			reg = <0x1ef0000 0x3000>;
829			clocks = <&gcc GCC_SMMU_CFG_CLK>,
830				 <&gcc GCC_APSS_TCU_CLK>;
831			clock-names = "iface", "bus";
832			qcom,iommu-secure-id = <17>;
833
834			// vfe:
835			iommu-ctx@3000 {
836				compatible = "qcom,msm-iommu-v1-sec";
837				reg = <0x3000 0x1000>;
838				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
839			};
840
841			// mdp_0:
842			iommu-ctx@4000 {
843				compatible = "qcom,msm-iommu-v1-ns";
844				reg = <0x4000 0x1000>;
845				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
846			};
847
848			// venus_ns:
849			iommu-ctx@5000 {
850				compatible = "qcom,msm-iommu-v1-sec";
851				reg = <0x5000 0x1000>;
852				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
853			};
854		};
855
856		gpu_iommu: iommu@1f08000 {
857			#address-cells = <1>;
858			#size-cells = <1>;
859			#iommu-cells = <1>;
860			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
861			ranges = <0 0x1f08000 0x10000>;
862			clocks = <&gcc GCC_SMMU_CFG_CLK>,
863				 <&gcc GCC_GFX_TCU_CLK>;
864			clock-names = "iface", "bus";
865			qcom,iommu-secure-id = <18>;
866
867			// gfx3d_user:
868			iommu-ctx@1000 {
869				compatible = "qcom,msm-iommu-v1-ns";
870				reg = <0x1000 0x1000>;
871				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
872			};
873
874			// gfx3d_priv:
875			iommu-ctx@2000 {
876				compatible = "qcom,msm-iommu-v1-ns";
877				reg = <0x2000 0x1000>;
878				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
879			};
880		};
881
882		gpu@1c00000 {
883			compatible = "qcom,adreno-306.0", "qcom,adreno";
884			reg = <0x01c00000 0x20000>;
885			reg-names = "kgsl_3d0_reg_memory";
886			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
887			interrupt-names = "kgsl_3d0_irq";
888			clock-names =
889			    "core",
890			    "iface",
891			    "mem",
892			    "mem_iface",
893			    "alt_mem_iface",
894			    "gfx3d";
895			clocks =
896			    <&gcc GCC_OXILI_GFX3D_CLK>,
897			    <&gcc GCC_OXILI_AHB_CLK>,
898			    <&gcc GCC_OXILI_GMEM_CLK>,
899			    <&gcc GCC_BIMC_GFX_CLK>,
900			    <&gcc GCC_BIMC_GPU_CLK>,
901			    <&gcc GFX3D_CLK_SRC>;
902			power-domains = <&gcc OXILI_GDSC>;
903			operating-points-v2 = <&gpu_opp_table>;
904			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
905		};
906
907		mdss: mdss@1a00000 {
908			compatible = "qcom,mdss";
909			reg = <0x1a00000 0x1000>,
910			      <0x1ac8000 0x3000>;
911			reg-names = "mdss_phys", "vbif_phys";
912
913			power-domains = <&gcc MDSS_GDSC>;
914
915			clocks = <&gcc GCC_MDSS_AHB_CLK>,
916				 <&gcc GCC_MDSS_AXI_CLK>,
917				 <&gcc GCC_MDSS_VSYNC_CLK>;
918			clock-names = "iface",
919				      "bus",
920				      "vsync";
921
922			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
923
924			interrupt-controller;
925			#interrupt-cells = <1>;
926
927			#address-cells = <1>;
928			#size-cells = <1>;
929			ranges;
930
931			mdp: mdp@1a01000 {
932				compatible = "qcom,mdp5";
933				reg = <0x1a01000 0x89000>;
934				reg-names = "mdp_phys";
935
936				interrupt-parent = <&mdss>;
937				interrupts = <0 0>;
938
939				clocks = <&gcc GCC_MDSS_AHB_CLK>,
940					 <&gcc GCC_MDSS_AXI_CLK>,
941					 <&gcc GCC_MDSS_MDP_CLK>,
942					 <&gcc GCC_MDSS_VSYNC_CLK>;
943				clock-names = "iface",
944					      "bus",
945					      "core",
946					      "vsync";
947
948				iommus = <&apps_iommu 4>;
949
950				ports {
951					#address-cells = <1>;
952					#size-cells = <0>;
953
954					port@0 {
955						reg = <0>;
956						mdp5_intf1_out: endpoint {
957							remote-endpoint = <&dsi0_in>;
958						};
959					};
960				};
961			};
962
963			dsi0: dsi@1a98000 {
964				compatible = "qcom,mdss-dsi-ctrl";
965				reg = <0x1a98000 0x25c>;
966				reg-names = "dsi_ctrl";
967
968				interrupt-parent = <&mdss>;
969				interrupts = <4 0>;
970
971				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
972						  <&gcc PCLK0_CLK_SRC>;
973				assigned-clock-parents = <&dsi_phy0 0>,
974							 <&dsi_phy0 1>;
975
976				clocks = <&gcc GCC_MDSS_MDP_CLK>,
977					 <&gcc GCC_MDSS_AHB_CLK>,
978					 <&gcc GCC_MDSS_AXI_CLK>,
979					 <&gcc GCC_MDSS_BYTE0_CLK>,
980					 <&gcc GCC_MDSS_PCLK0_CLK>,
981					 <&gcc GCC_MDSS_ESC0_CLK>;
982				clock-names = "mdp_core",
983					      "iface",
984					      "bus",
985					      "byte",
986					      "pixel",
987					      "core";
988				phys = <&dsi_phy0>;
989				phy-names = "dsi-phy";
990
991				ports {
992					#address-cells = <1>;
993					#size-cells = <0>;
994
995					port@0 {
996						reg = <0>;
997						dsi0_in: endpoint {
998							remote-endpoint = <&mdp5_intf1_out>;
999						};
1000					};
1001
1002					port@1 {
1003						reg = <1>;
1004						dsi0_out: endpoint {
1005						};
1006					};
1007				};
1008			};
1009
1010			dsi_phy0: dsi-phy@1a98300 {
1011				compatible = "qcom,dsi-phy-28nm-lp";
1012				reg = <0x1a98300 0xd4>,
1013				      <0x1a98500 0x280>,
1014				      <0x1a98780 0x30>;
1015				reg-names = "dsi_pll",
1016					    "dsi_phy",
1017					    "dsi_phy_regulator";
1018
1019				#clock-cells = <1>;
1020				#phy-cells = <0>;
1021
1022				clocks = <&gcc GCC_MDSS_AHB_CLK>,
1023					 <&xo_board>;
1024				clock-names = "iface", "ref";
1025			};
1026		};
1027
1028
1029		hexagon@4080000 {
1030			compatible = "qcom,q6v5-pil";
1031			reg = <0x04080000 0x100>,
1032			      <0x04020000 0x040>;
1033
1034			reg-names = "qdsp6", "rmb";
1035
1036			interrupts-extended = <&intc 0 24 1>,
1037					      <&hexagon_smp2p_in 0 0>,
1038					      <&hexagon_smp2p_in 1 0>,
1039					      <&hexagon_smp2p_in 2 0>,
1040					      <&hexagon_smp2p_in 3 0>;
1041			interrupt-names = "wdog", "fatal", "ready",
1042					  "handover", "stop-ack";
1043
1044			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1045				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
1046				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1047				 <&xo_board>;
1048			clock-names = "iface", "bus", "mem", "xo";
1049
1050			qcom,smem-states = <&hexagon_smp2p_out 0>;
1051			qcom,smem-state-names = "stop";
1052
1053			resets = <&scm 0>;
1054			reset-names = "mss_restart";
1055
1056			cx-supply = <&pm8916_s1>;
1057			mx-supply = <&pm8916_l3>;
1058			pll-supply = <&pm8916_l7>;
1059
1060			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
1061
1062			status = "disabled";
1063
1064			mba {
1065				memory-region = <&mba_mem>;
1066			};
1067
1068			mpss {
1069				memory-region = <&mpss_mem>;
1070			};
1071
1072			smd-edge {
1073				interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
1074
1075				qcom,smd-edge = <0>;
1076				qcom,ipc = <&apcs 8 12>;
1077				qcom,remote-pid = <1>;
1078
1079				label = "hexagon";
1080			};
1081		};
1082
1083		pronto: wcnss@a21b000 {
1084			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
1085			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
1086			reg-names = "ccu", "dxe", "pmu";
1087
1088			memory-region = <&wcnss_mem>;
1089
1090			interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
1091					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1092					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1093					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1094					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1095			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
1096
1097			vddmx-supply = <&pm8916_l3>;
1098			vddpx-supply = <&pm8916_l7>;
1099
1100			qcom,state = <&wcnss_smp2p_out 0>;
1101			qcom,state-names = "stop";
1102
1103			pinctrl-names = "default";
1104			pinctrl-0 = <&wcnss_pin_a>;
1105
1106			status = "disabled";
1107
1108			iris {
1109				compatible = "qcom,wcn3620";
1110
1111				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
1112				clock-names = "xo";
1113
1114				vddxo-supply = <&pm8916_l7>;
1115				vddrfa-supply = <&pm8916_s3>;
1116				vddpa-supply = <&pm8916_l9>;
1117				vdddig-supply = <&pm8916_l5>;
1118			};
1119
1120			smd-edge {
1121				interrupts = <0 142 1>;
1122
1123				qcom,ipc = <&apcs 8 17>;
1124				qcom,smd-edge = <6>;
1125				qcom,remote-pid = <4>;
1126
1127				label = "pronto";
1128
1129				wcnss {
1130					compatible = "qcom,wcnss";
1131					qcom,smd-channels = "WCNSS_CTRL";
1132
1133					qcom,mmio = <&pronto>;
1134
1135					bt {
1136						compatible = "qcom,wcnss-bt";
1137					};
1138
1139					wifi {
1140						compatible = "qcom,wcnss-wlan";
1141
1142						interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>,
1143							     <0 146 IRQ_TYPE_LEVEL_HIGH>;
1144						interrupt-names = "tx", "rx";
1145
1146						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
1147						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
1148					};
1149				};
1150			};
1151		};
1152
1153		tpiu@820000 {
1154			compatible = "arm,coresight-tpiu", "arm,primecell";
1155			reg = <0x820000 0x1000>;
1156
1157			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1158			clock-names = "apb_pclk", "atclk";
1159
1160			in-ports {
1161				port {
1162					tpiu_in: endpoint {
1163						remote-endpoint = <&replicator_out1>;
1164					};
1165				};
1166			};
1167		};
1168
1169		funnel@821000 {
1170			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1171			reg = <0x821000 0x1000>;
1172
1173			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1174			clock-names = "apb_pclk", "atclk";
1175
1176			in-ports {
1177				#address-cells = <1>;
1178				#size-cells = <0>;
1179
1180				/*
1181				 * Not described input ports:
1182				 * 0 - connected to Resource and Power Manger CPU ETM
1183				 * 1 - not-connected
1184				 * 2 - connected to Modem CPU ETM
1185				 * 3 - not-connected
1186				 * 5 - not-connected
1187				 * 6 - connected trought funnel to Wireless CPU ETM
1188				 * 7 - connected to STM component
1189				 */
1190
1191				port@4 {
1192					reg = <4>;
1193					funnel0_in4: endpoint {
1194						remote-endpoint = <&funnel1_out>;
1195					};
1196				};
1197			};
1198
1199			out-ports {
1200				port {
1201					funnel0_out: endpoint {
1202						remote-endpoint = <&etf_in>;
1203					};
1204				};
1205			};
1206		};
1207
1208		replicator@824000 {
1209			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1210			reg = <0x824000 0x1000>;
1211
1212			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1213			clock-names = "apb_pclk", "atclk";
1214
1215			out-ports {
1216				#address-cells = <1>;
1217				#size-cells = <0>;
1218
1219				port@0 {
1220					reg = <0>;
1221					replicator_out0: endpoint {
1222						remote-endpoint = <&etr_in>;
1223					};
1224				};
1225				port@1 {
1226					reg = <1>;
1227					replicator_out1: endpoint {
1228						remote-endpoint = <&tpiu_in>;
1229					};
1230				};
1231			};
1232
1233			in-ports {
1234				port {
1235					replicator_in: endpoint {
1236						remote-endpoint = <&etf_out>;
1237					};
1238				};
1239			};
1240		};
1241
1242		etf@825000 {
1243			compatible = "arm,coresight-tmc", "arm,primecell";
1244			reg = <0x825000 0x1000>;
1245
1246			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1247			clock-names = "apb_pclk", "atclk";
1248
1249			in-ports {
1250				port {
1251					etf_in: endpoint {
1252						remote-endpoint = <&funnel0_out>;
1253					};
1254				};
1255			};
1256
1257			out-ports {
1258				port {
1259					etf_out: endpoint {
1260						remote-endpoint = <&replicator_in>;
1261					};
1262				};
1263			};
1264		};
1265
1266		etr@826000 {
1267			compatible = "arm,coresight-tmc", "arm,primecell";
1268			reg = <0x826000 0x1000>;
1269
1270			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1271			clock-names = "apb_pclk", "atclk";
1272
1273			in-ports {
1274				port {
1275					etr_in: endpoint {
1276						remote-endpoint = <&replicator_out0>;
1277					};
1278				};
1279			};
1280		};
1281
1282		funnel@841000 {	/* APSS funnel only 4 inputs are used */
1283			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1284			reg = <0x841000 0x1000>;
1285
1286			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1287			clock-names = "apb_pclk", "atclk";
1288
1289			in-ports {
1290				#address-cells = <1>;
1291				#size-cells = <0>;
1292
1293				port@0 {
1294					reg = <0>;
1295					funnel1_in0: endpoint {
1296						remote-endpoint = <&etm0_out>;
1297					};
1298				};
1299				port@1 {
1300					reg = <1>;
1301					funnel1_in1: endpoint {
1302						remote-endpoint = <&etm1_out>;
1303					};
1304				};
1305				port@2 {
1306					reg = <2>;
1307					funnel1_in2: endpoint {
1308						remote-endpoint = <&etm2_out>;
1309					};
1310				};
1311				port@3 {
1312					reg = <3>;
1313					funnel1_in3: endpoint {
1314						remote-endpoint = <&etm3_out>;
1315					};
1316				};
1317			};
1318
1319			out-ports {
1320				port {
1321					funnel1_out: endpoint {
1322						remote-endpoint = <&funnel0_in4>;
1323					};
1324				};
1325			};
1326		};
1327
1328		debug@850000 {
1329			compatible = "arm,coresight-cpu-debug","arm,primecell";
1330			reg = <0x850000 0x1000>;
1331			clocks = <&rpmcc RPM_QDSS_CLK>;
1332			clock-names = "apb_pclk";
1333			cpu = <&CPU0>;
1334		};
1335
1336		debug@852000 {
1337			compatible = "arm,coresight-cpu-debug","arm,primecell";
1338			reg = <0x852000 0x1000>;
1339			clocks = <&rpmcc RPM_QDSS_CLK>;
1340			clock-names = "apb_pclk";
1341			cpu = <&CPU1>;
1342		};
1343
1344		debug@854000 {
1345			compatible = "arm,coresight-cpu-debug","arm,primecell";
1346			reg = <0x854000 0x1000>;
1347			clocks = <&rpmcc RPM_QDSS_CLK>;
1348			clock-names = "apb_pclk";
1349			cpu = <&CPU2>;
1350		};
1351
1352		debug@856000 {
1353			compatible = "arm,coresight-cpu-debug","arm,primecell";
1354			reg = <0x856000 0x1000>;
1355			clocks = <&rpmcc RPM_QDSS_CLK>;
1356			clock-names = "apb_pclk";
1357			cpu = <&CPU3>;
1358		};
1359
1360		etm@85c000 {
1361			compatible = "arm,coresight-etm4x", "arm,primecell";
1362			reg = <0x85c000 0x1000>;
1363
1364			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1365			clock-names = "apb_pclk", "atclk";
1366
1367			cpu = <&CPU0>;
1368
1369			out-ports {
1370				port {
1371					etm0_out: endpoint {
1372						remote-endpoint = <&funnel1_in0>;
1373					};
1374				};
1375			};
1376		};
1377
1378		etm@85d000 {
1379			compatible = "arm,coresight-etm4x", "arm,primecell";
1380			reg = <0x85d000 0x1000>;
1381
1382			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1383			clock-names = "apb_pclk", "atclk";
1384
1385			cpu = <&CPU1>;
1386
1387			out-ports {
1388				port {
1389					etm1_out: endpoint {
1390						remote-endpoint = <&funnel1_in1>;
1391					};
1392				};
1393			};
1394		};
1395
1396		etm@85e000 {
1397			compatible = "arm,coresight-etm4x", "arm,primecell";
1398			reg = <0x85e000 0x1000>;
1399
1400			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1401			clock-names = "apb_pclk", "atclk";
1402
1403			cpu = <&CPU2>;
1404
1405			out-ports {
1406				port {
1407					etm2_out: endpoint {
1408						remote-endpoint = <&funnel1_in2>;
1409					};
1410				};
1411			};
1412		};
1413
1414		etm@85f000 {
1415			compatible = "arm,coresight-etm4x", "arm,primecell";
1416			reg = <0x85f000 0x1000>;
1417
1418			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
1419			clock-names = "apb_pclk", "atclk";
1420
1421			cpu = <&CPU3>;
1422
1423			out-ports {
1424				port {
1425					etm3_out: endpoint {
1426						remote-endpoint = <&funnel1_in3>;
1427					};
1428				};
1429			};
1430		};
1431
1432		venus: video-codec@1d00000 {
1433			compatible = "qcom,msm8916-venus";
1434			reg = <0x01d00000 0xff000>;
1435			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
1436			power-domains = <&gcc VENUS_GDSC>;
1437			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
1438				 <&gcc GCC_VENUS0_AHB_CLK>,
1439				 <&gcc GCC_VENUS0_AXI_CLK>;
1440			clock-names = "core", "iface", "bus";
1441			iommus = <&apps_iommu 5>;
1442			memory-region = <&venus_mem>;
1443			status = "okay";
1444
1445			video-decoder {
1446				compatible = "venus-decoder";
1447			};
1448
1449			video-encoder {
1450				compatible = "venus-encoder";
1451			};
1452		};
1453
1454		camss: camss@1b00000 {
1455			compatible = "qcom,msm8916-camss";
1456			reg = <0x1b0ac00 0x200>,
1457				<0x1b00030 0x4>,
1458				<0x1b0b000 0x200>,
1459				<0x1b00038 0x4>,
1460				<0x1b08000 0x100>,
1461				<0x1b08400 0x100>,
1462				<0x1b0a000 0x500>,
1463				<0x1b00020 0x10>,
1464				<0x1b10000 0x1000>;
1465			reg-names = "csiphy0",
1466				"csiphy0_clk_mux",
1467				"csiphy1",
1468				"csiphy1_clk_mux",
1469				"csid0",
1470				"csid1",
1471				"ispif",
1472				"csi_clk_mux",
1473				"vfe0";
1474			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
1475				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
1476				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
1477				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
1478				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
1479				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
1480			interrupt-names = "csiphy0",
1481				"csiphy1",
1482				"csid0",
1483				"csid1",
1484				"ispif",
1485				"vfe0";
1486			power-domains = <&gcc VFE_GDSC>;
1487			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
1488				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
1489				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
1490				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
1491				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
1492				<&gcc GCC_CAMSS_CSI0_CLK>,
1493				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
1494				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
1495				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
1496				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
1497				<&gcc GCC_CAMSS_CSI1_CLK>,
1498				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
1499				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
1500				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
1501				<&gcc GCC_CAMSS_AHB_CLK>,
1502				<&gcc GCC_CAMSS_VFE0_CLK>,
1503				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
1504				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
1505				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
1506			clock-names = "top_ahb",
1507				"ispif_ahb",
1508				"csiphy0_timer",
1509				"csiphy1_timer",
1510				"csi0_ahb",
1511				"csi0",
1512				"csi0_phy",
1513				"csi0_pix",
1514				"csi0_rdi",
1515				"csi1_ahb",
1516				"csi1",
1517				"csi1_phy",
1518				"csi1_pix",
1519				"csi1_rdi",
1520				"ahb",
1521				"vfe0",
1522				"csi_vfe0",
1523				"vfe_ahb",
1524				"vfe_axi";
1525			vdda-supply = <&pm8916_l2>;
1526			iommus = <&apps_iommu 3>;
1527			status = "disabled";
1528			ports {
1529				#address-cells = <1>;
1530				#size-cells = <0>;
1531			};
1532		};
1533	};
1534
1535	smd {
1536		compatible = "qcom,smd";
1537
1538		rpm {
1539			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1540			qcom,ipc = <&apcs 8 0>;
1541			qcom,smd-edge = <15>;
1542
1543			rpm_requests {
1544				compatible = "qcom,rpm-msm8916";
1545				qcom,smd-channels = "rpm_requests";
1546
1547				rpmcc: qcom,rpmcc {
1548					compatible = "qcom,rpmcc-msm8916";
1549					#clock-cells = <1>;
1550				};
1551
1552				smd_rpm_regulators: pm8916-regulators {
1553					compatible = "qcom,rpm-pm8916-regulators";
1554
1555					pm8916_s1: s1 {};
1556					pm8916_s3: s3 {};
1557					pm8916_s4: s4 {};
1558
1559					pm8916_l1: l1 {};
1560					pm8916_l2: l2 {};
1561					pm8916_l3: l3 {};
1562					pm8916_l4: l4 {};
1563					pm8916_l5: l5 {};
1564					pm8916_l6: l6 {};
1565					pm8916_l7: l7 {};
1566					pm8916_l8: l8 {};
1567					pm8916_l9: l9 {};
1568					pm8916_l10: l10 {};
1569					pm8916_l11: l11 {};
1570					pm8916_l12: l12 {};
1571					pm8916_l13: l13 {};
1572					pm8916_l14: l14 {};
1573					pm8916_l15: l15 {};
1574					pm8916_l16: l16 {};
1575					pm8916_l17: l17 {};
1576					pm8916_l18: l18 {};
1577				};
1578			};
1579		};
1580	};
1581
1582	hexagon-smp2p {
1583		compatible = "qcom,smp2p";
1584		qcom,smem = <435>, <428>;
1585
1586		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
1587
1588		qcom,ipc = <&apcs 8 14>;
1589
1590		qcom,local-pid = <0>;
1591		qcom,remote-pid = <1>;
1592
1593		hexagon_smp2p_out: master-kernel {
1594			qcom,entry-name = "master-kernel";
1595
1596			#qcom,smem-state-cells = <1>;
1597		};
1598
1599		hexagon_smp2p_in: slave-kernel {
1600			qcom,entry-name = "slave-kernel";
1601
1602			interrupt-controller;
1603			#interrupt-cells = <2>;
1604		};
1605	};
1606
1607	wcnss-smp2p {
1608		compatible = "qcom,smp2p";
1609		qcom,smem = <451>, <431>;
1610
1611		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
1612
1613		qcom,ipc = <&apcs 8 18>;
1614
1615		qcom,local-pid = <0>;
1616		qcom,remote-pid = <4>;
1617
1618		wcnss_smp2p_out: master-kernel {
1619			qcom,entry-name = "master-kernel";
1620
1621			#qcom,smem-state-cells = <1>;
1622		};
1623
1624		wcnss_smp2p_in: slave-kernel {
1625			qcom,entry-name = "slave-kernel";
1626
1627			interrupt-controller;
1628			#interrupt-cells = <2>;
1629		};
1630	};
1631
1632	smsm {
1633		compatible = "qcom,smsm";
1634
1635		#address-cells = <1>;
1636		#size-cells = <0>;
1637
1638		qcom,ipc-1 = <&apcs 8 13>;
1639		qcom,ipc-3 = <&apcs 8 19>;
1640
1641		apps_smsm: apps@0 {
1642			reg = <0>;
1643
1644			#qcom,smem-state-cells = <1>;
1645		};
1646
1647		hexagon_smsm: hexagon@1 {
1648			reg = <1>;
1649			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
1650
1651			interrupt-controller;
1652			#interrupt-cells = <2>;
1653		};
1654
1655		wcnss_smsm: wcnss@6 {
1656			reg = <6>;
1657			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
1658
1659			interrupt-controller;
1660			#interrupt-cells = <2>;
1661		};
1662	};
1663};
1664
1665#include "msm8916-pins.dtsi"
1666