1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/arm/coresight-cti-dt.h> 7#include <dt-bindings/clock/qcom,gcc-msm8916.h> 8#include <dt-bindings/clock/qcom,rpmcc.h> 9#include <dt-bindings/interconnect/qcom,msm8916.h> 10#include <dt-bindings/interrupt-controller/arm-gic.h> 11#include <dt-bindings/power/qcom-rpmpd.h> 12#include <dt-bindings/reset/qcom,gcc-msm8916.h> 13#include <dt-bindings/thermal/thermal.h> 14 15/ { 16 interrupt-parent = <&intc>; 17 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 aliases { 22 sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ 23 sdhc2 = &sdhc_2; /* SDC2 SD card slot */ 24 }; 25 26 chosen { }; 27 28 memory { 29 device_type = "memory"; 30 /* We expect the bootloader to fill in the reg */ 31 reg = <0 0 0 0>; 32 }; 33 34 reserved-memory { 35 #address-cells = <2>; 36 #size-cells = <2>; 37 ranges; 38 39 tz-apps@86000000 { 40 reg = <0x0 0x86000000 0x0 0x300000>; 41 no-map; 42 }; 43 44 smem_mem: smem_region@86300000 { 45 reg = <0x0 0x86300000 0x0 0x100000>; 46 no-map; 47 }; 48 49 hypervisor@86400000 { 50 reg = <0x0 0x86400000 0x0 0x100000>; 51 no-map; 52 }; 53 54 tz@86500000 { 55 reg = <0x0 0x86500000 0x0 0x180000>; 56 no-map; 57 }; 58 59 reserved@86680000 { 60 reg = <0x0 0x86680000 0x0 0x80000>; 61 no-map; 62 }; 63 64 rmtfs@86700000 { 65 compatible = "qcom,rmtfs-mem"; 66 reg = <0x0 0x86700000 0x0 0xe0000>; 67 no-map; 68 69 qcom,client-id = <1>; 70 }; 71 72 rfsa@867e0000 { 73 reg = <0x0 0x867e0000 0x0 0x20000>; 74 no-map; 75 }; 76 77 mpss_mem: mpss@86800000 { 78 reg = <0x0 0x86800000 0x0 0x2b00000>; 79 no-map; 80 }; 81 82 wcnss_mem: wcnss@89300000 { 83 reg = <0x0 0x89300000 0x0 0x600000>; 84 no-map; 85 }; 86 87 venus_mem: venus@89900000 { 88 reg = <0x0 0x89900000 0x0 0x600000>; 89 no-map; 90 }; 91 92 mba_mem: mba@8ea00000 { 93 no-map; 94 reg = <0 0x8ea00000 0 0x100000>; 95 }; 96 }; 97 98 clocks { 99 xo_board: xo-board { 100 compatible = "fixed-clock"; 101 #clock-cells = <0>; 102 clock-frequency = <19200000>; 103 }; 104 105 sleep_clk: sleep-clk { 106 compatible = "fixed-clock"; 107 #clock-cells = <0>; 108 clock-frequency = <32768>; 109 }; 110 }; 111 112 cpus { 113 #address-cells = <1>; 114 #size-cells = <0>; 115 116 CPU0: cpu@0 { 117 device_type = "cpu"; 118 compatible = "arm,cortex-a53"; 119 reg = <0x0>; 120 next-level-cache = <&L2_0>; 121 enable-method = "psci"; 122 clocks = <&apcs>; 123 operating-points-v2 = <&cpu_opp_table>; 124 #cooling-cells = <2>; 125 power-domains = <&CPU_PD0>; 126 power-domain-names = "psci"; 127 }; 128 129 CPU1: cpu@1 { 130 device_type = "cpu"; 131 compatible = "arm,cortex-a53"; 132 reg = <0x1>; 133 next-level-cache = <&L2_0>; 134 enable-method = "psci"; 135 clocks = <&apcs>; 136 operating-points-v2 = <&cpu_opp_table>; 137 #cooling-cells = <2>; 138 power-domains = <&CPU_PD1>; 139 power-domain-names = "psci"; 140 }; 141 142 CPU2: cpu@2 { 143 device_type = "cpu"; 144 compatible = "arm,cortex-a53"; 145 reg = <0x2>; 146 next-level-cache = <&L2_0>; 147 enable-method = "psci"; 148 clocks = <&apcs>; 149 operating-points-v2 = <&cpu_opp_table>; 150 #cooling-cells = <2>; 151 power-domains = <&CPU_PD2>; 152 power-domain-names = "psci"; 153 }; 154 155 CPU3: cpu@3 { 156 device_type = "cpu"; 157 compatible = "arm,cortex-a53"; 158 reg = <0x3>; 159 next-level-cache = <&L2_0>; 160 enable-method = "psci"; 161 clocks = <&apcs>; 162 operating-points-v2 = <&cpu_opp_table>; 163 #cooling-cells = <2>; 164 power-domains = <&CPU_PD3>; 165 power-domain-names = "psci"; 166 }; 167 168 L2_0: l2-cache { 169 compatible = "cache"; 170 cache-level = <2>; 171 }; 172 173 idle-states { 174 entry-method = "psci"; 175 176 CPU_SLEEP_0: cpu-sleep-0 { 177 compatible = "arm,idle-state"; 178 idle-state-name = "standalone-power-collapse"; 179 arm,psci-suspend-param = <0x40000002>; 180 entry-latency-us = <130>; 181 exit-latency-us = <150>; 182 min-residency-us = <2000>; 183 local-timer-stop; 184 }; 185 }; 186 187 domain-idle-states { 188 189 CLUSTER_RET: cluster-retention { 190 compatible = "domain-idle-state"; 191 arm,psci-suspend-param = <0x41000012>; 192 entry-latency-us = <500>; 193 exit-latency-us = <500>; 194 min-residency-us = <2000>; 195 }; 196 197 CLUSTER_PWRDN: cluster-gdhs { 198 compatible = "domain-idle-state"; 199 arm,psci-suspend-param = <0x41000032>; 200 entry-latency-us = <2000>; 201 exit-latency-us = <2000>; 202 min-residency-us = <6000>; 203 }; 204 }; 205 }; 206 207 cpu_opp_table: cpu-opp-table { 208 compatible = "operating-points-v2"; 209 opp-shared; 210 211 opp-200000000 { 212 opp-hz = /bits/ 64 <200000000>; 213 }; 214 opp-400000000 { 215 opp-hz = /bits/ 64 <400000000>; 216 }; 217 opp-800000000 { 218 opp-hz = /bits/ 64 <800000000>; 219 }; 220 opp-998400000 { 221 opp-hz = /bits/ 64 <998400000>; 222 }; 223 }; 224 225 firmware { 226 scm: scm { 227 compatible = "qcom,scm-msm8916", "qcom,scm"; 228 clocks = <&gcc GCC_CRYPTO_CLK>, 229 <&gcc GCC_CRYPTO_AXI_CLK>, 230 <&gcc GCC_CRYPTO_AHB_CLK>; 231 clock-names = "core", "bus", "iface"; 232 #reset-cells = <1>; 233 234 qcom,dload-mode = <&tcsr 0x6100>; 235 }; 236 }; 237 238 pmu { 239 compatible = "arm,cortex-a53-pmu"; 240 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 241 }; 242 243 psci { 244 compatible = "arm,psci-1.0"; 245 method = "smc"; 246 247 CPU_PD0: power-domain-cpu0 { 248 #power-domain-cells = <0>; 249 power-domains = <&CLUSTER_PD>; 250 domain-idle-states = <&CPU_SLEEP_0>; 251 }; 252 253 CPU_PD1: power-domain-cpu1 { 254 #power-domain-cells = <0>; 255 power-domains = <&CLUSTER_PD>; 256 domain-idle-states = <&CPU_SLEEP_0>; 257 }; 258 259 CPU_PD2: power-domain-cpu2 { 260 #power-domain-cells = <0>; 261 power-domains = <&CLUSTER_PD>; 262 domain-idle-states = <&CPU_SLEEP_0>; 263 }; 264 265 CPU_PD3: power-domain-cpu3 { 266 #power-domain-cells = <0>; 267 power-domains = <&CLUSTER_PD>; 268 domain-idle-states = <&CPU_SLEEP_0>; 269 }; 270 271 CLUSTER_PD: power-domain-cluster { 272 #power-domain-cells = <0>; 273 domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; 274 }; 275 }; 276 277 smd { 278 compatible = "qcom,smd"; 279 280 rpm { 281 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 282 qcom,ipc = <&apcs 8 0>; 283 qcom,smd-edge = <15>; 284 285 rpm_requests: rpm-requests { 286 compatible = "qcom,rpm-msm8916"; 287 qcom,smd-channels = "rpm_requests"; 288 289 rpmcc: clock-controller { 290 compatible = "qcom,rpmcc-msm8916"; 291 #clock-cells = <1>; 292 }; 293 294 rpmpd: power-controller { 295 compatible = "qcom,msm8916-rpmpd"; 296 #power-domain-cells = <1>; 297 operating-points-v2 = <&rpmpd_opp_table>; 298 299 rpmpd_opp_table: opp-table { 300 compatible = "operating-points-v2"; 301 302 rpmpd_opp_ret: opp1 { 303 opp-level = <1>; 304 }; 305 rpmpd_opp_svs_krait: opp2 { 306 opp-level = <2>; 307 }; 308 rpmpd_opp_svs_soc: opp3 { 309 opp-level = <3>; 310 }; 311 rpmpd_opp_nom: opp4 { 312 opp-level = <4>; 313 }; 314 rpmpd_opp_turbo: opp5 { 315 opp-level = <5>; 316 }; 317 rpmpd_opp_super_turbo: opp6 { 318 opp-level = <6>; 319 }; 320 }; 321 }; 322 }; 323 }; 324 }; 325 326 smem { 327 compatible = "qcom,smem"; 328 329 memory-region = <&smem_mem>; 330 qcom,rpm-msg-ram = <&rpm_msg_ram>; 331 332 hwlocks = <&tcsr_mutex 3>; 333 }; 334 335 smp2p-hexagon { 336 compatible = "qcom,smp2p"; 337 qcom,smem = <435>, <428>; 338 339 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; 340 341 qcom,ipc = <&apcs 8 14>; 342 343 qcom,local-pid = <0>; 344 qcom,remote-pid = <1>; 345 346 hexagon_smp2p_out: master-kernel { 347 qcom,entry-name = "master-kernel"; 348 349 #qcom,smem-state-cells = <1>; 350 }; 351 352 hexagon_smp2p_in: slave-kernel { 353 qcom,entry-name = "slave-kernel"; 354 355 interrupt-controller; 356 #interrupt-cells = <2>; 357 }; 358 }; 359 360 smp2p-wcnss { 361 compatible = "qcom,smp2p"; 362 qcom,smem = <451>, <431>; 363 364 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 365 366 qcom,ipc = <&apcs 8 18>; 367 368 qcom,local-pid = <0>; 369 qcom,remote-pid = <4>; 370 371 wcnss_smp2p_out: master-kernel { 372 qcom,entry-name = "master-kernel"; 373 374 #qcom,smem-state-cells = <1>; 375 }; 376 377 wcnss_smp2p_in: slave-kernel { 378 qcom,entry-name = "slave-kernel"; 379 380 interrupt-controller; 381 #interrupt-cells = <2>; 382 }; 383 }; 384 385 smsm { 386 compatible = "qcom,smsm"; 387 388 #address-cells = <1>; 389 #size-cells = <0>; 390 391 qcom,ipc-1 = <&apcs 8 13>; 392 qcom,ipc-3 = <&apcs 8 19>; 393 394 apps_smsm: apps@0 { 395 reg = <0>; 396 397 #qcom,smem-state-cells = <1>; 398 }; 399 400 hexagon_smsm: hexagon@1 { 401 reg = <1>; 402 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 403 404 interrupt-controller; 405 #interrupt-cells = <2>; 406 }; 407 408 wcnss_smsm: wcnss@6 { 409 reg = <6>; 410 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; 411 412 interrupt-controller; 413 #interrupt-cells = <2>; 414 }; 415 }; 416 417 soc: soc { 418 #address-cells = <1>; 419 #size-cells = <1>; 420 ranges = <0 0 0 0xffffffff>; 421 compatible = "simple-bus"; 422 423 rng@22000 { 424 compatible = "qcom,prng"; 425 reg = <0x00022000 0x200>; 426 clocks = <&gcc GCC_PRNG_AHB_CLK>; 427 clock-names = "core"; 428 }; 429 430 restart@4ab000 { 431 compatible = "qcom,pshold"; 432 reg = <0x004ab000 0x4>; 433 }; 434 435 qfprom: qfprom@5c000 { 436 compatible = "qcom,qfprom"; 437 reg = <0x0005c000 0x1000>; 438 #address-cells = <1>; 439 #size-cells = <1>; 440 tsens_caldata: caldata@d0 { 441 reg = <0xd0 0x8>; 442 }; 443 tsens_calsel: calsel@ec { 444 reg = <0xec 0x4>; 445 }; 446 }; 447 448 rpm_msg_ram: memory@60000 { 449 compatible = "qcom,rpm-msg-ram"; 450 reg = <0x00060000 0x8000>; 451 }; 452 453 bimc: interconnect@400000 { 454 compatible = "qcom,msm8916-bimc"; 455 reg = <0x00400000 0x62000>; 456 #interconnect-cells = <1>; 457 clock-names = "bus", "bus_a"; 458 clocks = <&rpmcc RPM_SMD_BIMC_CLK>, 459 <&rpmcc RPM_SMD_BIMC_A_CLK>; 460 }; 461 462 tsens: thermal-sensor@4a9000 { 463 compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; 464 reg = <0x004a9000 0x1000>, /* TM */ 465 <0x004a8000 0x1000>; /* SROT */ 466 nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; 467 nvmem-cell-names = "calib", "calib_sel"; 468 #qcom,sensors = <5>; 469 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 470 interrupt-names = "uplow"; 471 #thermal-sensor-cells = <1>; 472 }; 473 474 pcnoc: interconnect@500000 { 475 compatible = "qcom,msm8916-pcnoc"; 476 reg = <0x00500000 0x11000>; 477 #interconnect-cells = <1>; 478 clock-names = "bus", "bus_a"; 479 clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, 480 <&rpmcc RPM_SMD_PCNOC_A_CLK>; 481 }; 482 483 snoc: interconnect@580000 { 484 compatible = "qcom,msm8916-snoc"; 485 reg = <0x00580000 0x14000>; 486 #interconnect-cells = <1>; 487 clock-names = "bus", "bus_a"; 488 clocks = <&rpmcc RPM_SMD_SNOC_CLK>, 489 <&rpmcc RPM_SMD_SNOC_A_CLK>; 490 }; 491 492 /* System CTIs */ 493 /* CTI 0 - TMC connections */ 494 cti0: cti@810000 { 495 compatible = "arm,coresight-cti", "arm,primecell"; 496 reg = <0x00810000 0x1000>; 497 498 clocks = <&rpmcc RPM_QDSS_CLK>; 499 clock-names = "apb_pclk"; 500 501 status = "disabled"; 502 }; 503 504 /* CTI 1 - TPIU connections */ 505 cti1: cti@811000 { 506 compatible = "arm,coresight-cti", "arm,primecell"; 507 reg = <0x00811000 0x1000>; 508 509 clocks = <&rpmcc RPM_QDSS_CLK>; 510 clock-names = "apb_pclk"; 511 512 status = "disabled"; 513 }; 514 515 /* CTIs 2-11 - no information - not instantiated */ 516 517 tpiu: tpiu@820000 { 518 compatible = "arm,coresight-tpiu", "arm,primecell"; 519 reg = <0x00820000 0x1000>; 520 521 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 522 clock-names = "apb_pclk", "atclk"; 523 524 status = "disabled"; 525 526 in-ports { 527 port { 528 tpiu_in: endpoint { 529 remote-endpoint = <&replicator_out1>; 530 }; 531 }; 532 }; 533 }; 534 535 funnel0: funnel@821000 { 536 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 537 reg = <0x00821000 0x1000>; 538 539 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 540 clock-names = "apb_pclk", "atclk"; 541 542 status = "disabled"; 543 544 in-ports { 545 #address-cells = <1>; 546 #size-cells = <0>; 547 548 /* 549 * Not described input ports: 550 * 0 - connected to Resource and Power Manger CPU ETM 551 * 1 - not-connected 552 * 2 - connected to Modem CPU ETM 553 * 3 - not-connected 554 * 5 - not-connected 555 * 6 - connected trought funnel to Wireless CPU ETM 556 * 7 - connected to STM component 557 */ 558 559 port@4 { 560 reg = <4>; 561 funnel0_in4: endpoint { 562 remote-endpoint = <&funnel1_out>; 563 }; 564 }; 565 }; 566 567 out-ports { 568 port { 569 funnel0_out: endpoint { 570 remote-endpoint = <&etf_in>; 571 }; 572 }; 573 }; 574 }; 575 576 replicator: replicator@824000 { 577 compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; 578 reg = <0x00824000 0x1000>; 579 580 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 581 clock-names = "apb_pclk", "atclk"; 582 583 status = "disabled"; 584 585 out-ports { 586 #address-cells = <1>; 587 #size-cells = <0>; 588 589 port@0 { 590 reg = <0>; 591 replicator_out0: endpoint { 592 remote-endpoint = <&etr_in>; 593 }; 594 }; 595 port@1 { 596 reg = <1>; 597 replicator_out1: endpoint { 598 remote-endpoint = <&tpiu_in>; 599 }; 600 }; 601 }; 602 603 in-ports { 604 port { 605 replicator_in: endpoint { 606 remote-endpoint = <&etf_out>; 607 }; 608 }; 609 }; 610 }; 611 612 etf: etf@825000 { 613 compatible = "arm,coresight-tmc", "arm,primecell"; 614 reg = <0x00825000 0x1000>; 615 616 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 617 clock-names = "apb_pclk", "atclk"; 618 619 status = "disabled"; 620 621 in-ports { 622 port { 623 etf_in: endpoint { 624 remote-endpoint = <&funnel0_out>; 625 }; 626 }; 627 }; 628 629 out-ports { 630 port { 631 etf_out: endpoint { 632 remote-endpoint = <&replicator_in>; 633 }; 634 }; 635 }; 636 }; 637 638 etr: etr@826000 { 639 compatible = "arm,coresight-tmc", "arm,primecell"; 640 reg = <0x00826000 0x1000>; 641 642 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 643 clock-names = "apb_pclk", "atclk"; 644 645 status = "disabled"; 646 647 in-ports { 648 port { 649 etr_in: endpoint { 650 remote-endpoint = <&replicator_out0>; 651 }; 652 }; 653 }; 654 }; 655 656 funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ 657 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 658 reg = <0x00841000 0x1000>; 659 660 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 661 clock-names = "apb_pclk", "atclk"; 662 663 status = "disabled"; 664 665 in-ports { 666 #address-cells = <1>; 667 #size-cells = <0>; 668 669 port@0 { 670 reg = <0>; 671 funnel1_in0: endpoint { 672 remote-endpoint = <&etm0_out>; 673 }; 674 }; 675 port@1 { 676 reg = <1>; 677 funnel1_in1: endpoint { 678 remote-endpoint = <&etm1_out>; 679 }; 680 }; 681 port@2 { 682 reg = <2>; 683 funnel1_in2: endpoint { 684 remote-endpoint = <&etm2_out>; 685 }; 686 }; 687 port@3 { 688 reg = <3>; 689 funnel1_in3: endpoint { 690 remote-endpoint = <&etm3_out>; 691 }; 692 }; 693 }; 694 695 out-ports { 696 port { 697 funnel1_out: endpoint { 698 remote-endpoint = <&funnel0_in4>; 699 }; 700 }; 701 }; 702 }; 703 704 debug0: debug@850000 { 705 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 706 reg = <0x00850000 0x1000>; 707 clocks = <&rpmcc RPM_QDSS_CLK>; 708 clock-names = "apb_pclk"; 709 cpu = <&CPU0>; 710 status = "disabled"; 711 }; 712 713 debug1: debug@852000 { 714 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 715 reg = <0x00852000 0x1000>; 716 clocks = <&rpmcc RPM_QDSS_CLK>; 717 clock-names = "apb_pclk"; 718 cpu = <&CPU1>; 719 status = "disabled"; 720 }; 721 722 debug2: debug@854000 { 723 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 724 reg = <0x00854000 0x1000>; 725 clocks = <&rpmcc RPM_QDSS_CLK>; 726 clock-names = "apb_pclk"; 727 cpu = <&CPU2>; 728 status = "disabled"; 729 }; 730 731 debug3: debug@856000 { 732 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 733 reg = <0x00856000 0x1000>; 734 clocks = <&rpmcc RPM_QDSS_CLK>; 735 clock-names = "apb_pclk"; 736 cpu = <&CPU3>; 737 status = "disabled"; 738 }; 739 740 /* Core CTIs; CTIs 12-15 */ 741 /* CTI - CPU-0 */ 742 cti12: cti@858000 { 743 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 744 "arm,primecell"; 745 reg = <0x00858000 0x1000>; 746 747 clocks = <&rpmcc RPM_QDSS_CLK>; 748 clock-names = "apb_pclk"; 749 750 cpu = <&CPU0>; 751 arm,cs-dev-assoc = <&etm0>; 752 753 status = "disabled"; 754 }; 755 756 /* CTI - CPU-1 */ 757 cti13: cti@859000 { 758 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 759 "arm,primecell"; 760 reg = <0x00859000 0x1000>; 761 762 clocks = <&rpmcc RPM_QDSS_CLK>; 763 clock-names = "apb_pclk"; 764 765 cpu = <&CPU1>; 766 arm,cs-dev-assoc = <&etm1>; 767 768 status = "disabled"; 769 }; 770 771 /* CTI - CPU-2 */ 772 cti14: cti@85a000 { 773 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 774 "arm,primecell"; 775 reg = <0x0085a000 0x1000>; 776 777 clocks = <&rpmcc RPM_QDSS_CLK>; 778 clock-names = "apb_pclk"; 779 780 cpu = <&CPU2>; 781 arm,cs-dev-assoc = <&etm2>; 782 783 status = "disabled"; 784 }; 785 786 /* CTI - CPU-3 */ 787 cti15: cti@85b000 { 788 compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", 789 "arm,primecell"; 790 reg = <0x0085b000 0x1000>; 791 792 clocks = <&rpmcc RPM_QDSS_CLK>; 793 clock-names = "apb_pclk"; 794 795 cpu = <&CPU3>; 796 arm,cs-dev-assoc = <&etm3>; 797 798 status = "disabled"; 799 }; 800 801 etm0: etm@85c000 { 802 compatible = "arm,coresight-etm4x", "arm,primecell"; 803 reg = <0x0085c000 0x1000>; 804 805 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 806 clock-names = "apb_pclk", "atclk"; 807 arm,coresight-loses-context-with-cpu; 808 809 cpu = <&CPU0>; 810 811 status = "disabled"; 812 813 out-ports { 814 port { 815 etm0_out: endpoint { 816 remote-endpoint = <&funnel1_in0>; 817 }; 818 }; 819 }; 820 }; 821 822 etm1: etm@85d000 { 823 compatible = "arm,coresight-etm4x", "arm,primecell"; 824 reg = <0x0085d000 0x1000>; 825 826 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 827 clock-names = "apb_pclk", "atclk"; 828 arm,coresight-loses-context-with-cpu; 829 830 cpu = <&CPU1>; 831 832 status = "disabled"; 833 834 out-ports { 835 port { 836 etm1_out: endpoint { 837 remote-endpoint = <&funnel1_in1>; 838 }; 839 }; 840 }; 841 }; 842 843 etm2: etm@85e000 { 844 compatible = "arm,coresight-etm4x", "arm,primecell"; 845 reg = <0x0085e000 0x1000>; 846 847 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 848 clock-names = "apb_pclk", "atclk"; 849 arm,coresight-loses-context-with-cpu; 850 851 cpu = <&CPU2>; 852 853 status = "disabled"; 854 855 out-ports { 856 port { 857 etm2_out: endpoint { 858 remote-endpoint = <&funnel1_in2>; 859 }; 860 }; 861 }; 862 }; 863 864 etm3: etm@85f000 { 865 compatible = "arm,coresight-etm4x", "arm,primecell"; 866 reg = <0x0085f000 0x1000>; 867 868 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 869 clock-names = "apb_pclk", "atclk"; 870 arm,coresight-loses-context-with-cpu; 871 872 cpu = <&CPU3>; 873 874 status = "disabled"; 875 876 out-ports { 877 port { 878 etm3_out: endpoint { 879 remote-endpoint = <&funnel1_in3>; 880 }; 881 }; 882 }; 883 }; 884 885 msmgpio: pinctrl@1000000 { 886 compatible = "qcom,msm8916-pinctrl"; 887 reg = <0x01000000 0x300000>; 888 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 889 gpio-controller; 890 gpio-ranges = <&msmgpio 0 0 122>; 891 #gpio-cells = <2>; 892 interrupt-controller; 893 #interrupt-cells = <2>; 894 }; 895 896 gcc: clock-controller@1800000 { 897 compatible = "qcom,gcc-msm8916"; 898 #clock-cells = <1>; 899 #reset-cells = <1>; 900 #power-domain-cells = <1>; 901 reg = <0x01800000 0x80000>; 902 }; 903 904 tcsr_mutex: hwlock@1905000 { 905 compatible = "qcom,tcsr-mutex"; 906 reg = <0x01905000 0x20000>; 907 #hwlock-cells = <1>; 908 }; 909 910 tcsr: syscon@1937000 { 911 compatible = "qcom,tcsr-msm8916", "syscon"; 912 reg = <0x01937000 0x30000>; 913 }; 914 915 mdss: mdss@1a00000 { 916 status = "disabled"; 917 compatible = "qcom,mdss"; 918 reg = <0x01a00000 0x1000>, 919 <0x01ac8000 0x3000>; 920 reg-names = "mdss_phys", "vbif_phys"; 921 922 power-domains = <&gcc MDSS_GDSC>; 923 924 clocks = <&gcc GCC_MDSS_AHB_CLK>, 925 <&gcc GCC_MDSS_AXI_CLK>, 926 <&gcc GCC_MDSS_VSYNC_CLK>; 927 clock-names = "iface", 928 "bus", 929 "vsync"; 930 931 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 932 933 interrupt-controller; 934 #interrupt-cells = <1>; 935 936 #address-cells = <1>; 937 #size-cells = <1>; 938 ranges; 939 940 mdp: mdp@1a01000 { 941 compatible = "qcom,mdp5"; 942 reg = <0x01a01000 0x89000>; 943 reg-names = "mdp_phys"; 944 945 interrupt-parent = <&mdss>; 946 interrupts = <0>; 947 948 clocks = <&gcc GCC_MDSS_AHB_CLK>, 949 <&gcc GCC_MDSS_AXI_CLK>, 950 <&gcc GCC_MDSS_MDP_CLK>, 951 <&gcc GCC_MDSS_VSYNC_CLK>; 952 clock-names = "iface", 953 "bus", 954 "core", 955 "vsync"; 956 957 iommus = <&apps_iommu 4>; 958 959 ports { 960 #address-cells = <1>; 961 #size-cells = <0>; 962 963 port@0 { 964 reg = <0>; 965 mdp5_intf1_out: endpoint { 966 remote-endpoint = <&dsi0_in>; 967 }; 968 }; 969 }; 970 }; 971 972 dsi0: dsi@1a98000 { 973 compatible = "qcom,mdss-dsi-ctrl"; 974 reg = <0x01a98000 0x25c>; 975 reg-names = "dsi_ctrl"; 976 977 interrupt-parent = <&mdss>; 978 interrupts = <4>; 979 980 assigned-clocks = <&gcc BYTE0_CLK_SRC>, 981 <&gcc PCLK0_CLK_SRC>; 982 assigned-clock-parents = <&dsi_phy0 0>, 983 <&dsi_phy0 1>; 984 985 clocks = <&gcc GCC_MDSS_MDP_CLK>, 986 <&gcc GCC_MDSS_AHB_CLK>, 987 <&gcc GCC_MDSS_AXI_CLK>, 988 <&gcc GCC_MDSS_BYTE0_CLK>, 989 <&gcc GCC_MDSS_PCLK0_CLK>, 990 <&gcc GCC_MDSS_ESC0_CLK>; 991 clock-names = "mdp_core", 992 "iface", 993 "bus", 994 "byte", 995 "pixel", 996 "core"; 997 phys = <&dsi_phy0>; 998 phy-names = "dsi-phy"; 999 1000 #address-cells = <1>; 1001 #size-cells = <0>; 1002 1003 ports { 1004 #address-cells = <1>; 1005 #size-cells = <0>; 1006 1007 port@0 { 1008 reg = <0>; 1009 dsi0_in: endpoint { 1010 remote-endpoint = <&mdp5_intf1_out>; 1011 }; 1012 }; 1013 1014 port@1 { 1015 reg = <1>; 1016 dsi0_out: endpoint { 1017 }; 1018 }; 1019 }; 1020 }; 1021 1022 dsi_phy0: dsi-phy@1a98300 { 1023 compatible = "qcom,dsi-phy-28nm-lp"; 1024 reg = <0x01a98300 0xd4>, 1025 <0x01a98500 0x280>, 1026 <0x01a98780 0x30>; 1027 reg-names = "dsi_pll", 1028 "dsi_phy", 1029 "dsi_phy_regulator"; 1030 1031 #clock-cells = <1>; 1032 #phy-cells = <0>; 1033 1034 clocks = <&gcc GCC_MDSS_AHB_CLK>, 1035 <&xo_board>; 1036 clock-names = "iface", "ref"; 1037 }; 1038 }; 1039 1040 camss: camss@1b00000 { 1041 compatible = "qcom,msm8916-camss"; 1042 reg = <0x01b0ac00 0x200>, 1043 <0x01b00030 0x4>, 1044 <0x01b0b000 0x200>, 1045 <0x01b00038 0x4>, 1046 <0x01b08000 0x100>, 1047 <0x01b08400 0x100>, 1048 <0x01b0a000 0x500>, 1049 <0x01b00020 0x10>, 1050 <0x01b10000 0x1000>; 1051 reg-names = "csiphy0", 1052 "csiphy0_clk_mux", 1053 "csiphy1", 1054 "csiphy1_clk_mux", 1055 "csid0", 1056 "csid1", 1057 "ispif", 1058 "csi_clk_mux", 1059 "vfe0"; 1060 interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, 1061 <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, 1062 <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, 1063 <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, 1064 <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, 1065 <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; 1066 interrupt-names = "csiphy0", 1067 "csiphy1", 1068 "csid0", 1069 "csid1", 1070 "ispif", 1071 "vfe0"; 1072 power-domains = <&gcc VFE_GDSC>; 1073 clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, 1074 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, 1075 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, 1076 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, 1077 <&gcc GCC_CAMSS_CSI0_AHB_CLK>, 1078 <&gcc GCC_CAMSS_CSI0_CLK>, 1079 <&gcc GCC_CAMSS_CSI0PHY_CLK>, 1080 <&gcc GCC_CAMSS_CSI0PIX_CLK>, 1081 <&gcc GCC_CAMSS_CSI0RDI_CLK>, 1082 <&gcc GCC_CAMSS_CSI1_AHB_CLK>, 1083 <&gcc GCC_CAMSS_CSI1_CLK>, 1084 <&gcc GCC_CAMSS_CSI1PHY_CLK>, 1085 <&gcc GCC_CAMSS_CSI1PIX_CLK>, 1086 <&gcc GCC_CAMSS_CSI1RDI_CLK>, 1087 <&gcc GCC_CAMSS_AHB_CLK>, 1088 <&gcc GCC_CAMSS_VFE0_CLK>, 1089 <&gcc GCC_CAMSS_CSI_VFE0_CLK>, 1090 <&gcc GCC_CAMSS_VFE_AHB_CLK>, 1091 <&gcc GCC_CAMSS_VFE_AXI_CLK>; 1092 clock-names = "top_ahb", 1093 "ispif_ahb", 1094 "csiphy0_timer", 1095 "csiphy1_timer", 1096 "csi0_ahb", 1097 "csi0", 1098 "csi0_phy", 1099 "csi0_pix", 1100 "csi0_rdi", 1101 "csi1_ahb", 1102 "csi1", 1103 "csi1_phy", 1104 "csi1_pix", 1105 "csi1_rdi", 1106 "ahb", 1107 "vfe0", 1108 "csi_vfe0", 1109 "vfe_ahb", 1110 "vfe_axi"; 1111 iommus = <&apps_iommu 3>; 1112 status = "disabled"; 1113 ports { 1114 #address-cells = <1>; 1115 #size-cells = <0>; 1116 }; 1117 }; 1118 1119 cci: cci@1b0c000 { 1120 compatible = "qcom,msm8916-cci"; 1121 #address-cells = <1>; 1122 #size-cells = <0>; 1123 reg = <0x01b0c000 0x1000>; 1124 interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; 1125 clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, 1126 <&gcc GCC_CAMSS_CCI_AHB_CLK>, 1127 <&gcc GCC_CAMSS_CCI_CLK>, 1128 <&gcc GCC_CAMSS_AHB_CLK>; 1129 clock-names = "camss_top_ahb", "cci_ahb", 1130 "cci", "camss_ahb"; 1131 assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, 1132 <&gcc GCC_CAMSS_CCI_CLK>; 1133 assigned-clock-rates = <80000000>, <19200000>; 1134 pinctrl-names = "default"; 1135 pinctrl-0 = <&cci0_default>; 1136 status = "disabled"; 1137 1138 cci_i2c0: i2c-bus@0 { 1139 reg = <0>; 1140 clock-frequency = <400000>; 1141 #address-cells = <1>; 1142 #size-cells = <0>; 1143 }; 1144 }; 1145 1146 gpu@1c00000 { 1147 compatible = "qcom,adreno-306.0", "qcom,adreno"; 1148 reg = <0x01c00000 0x20000>; 1149 reg-names = "kgsl_3d0_reg_memory"; 1150 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 1151 interrupt-names = "kgsl_3d0_irq"; 1152 clock-names = 1153 "core", 1154 "iface", 1155 "mem", 1156 "mem_iface", 1157 "alt_mem_iface", 1158 "gfx3d"; 1159 clocks = 1160 <&gcc GCC_OXILI_GFX3D_CLK>, 1161 <&gcc GCC_OXILI_AHB_CLK>, 1162 <&gcc GCC_OXILI_GMEM_CLK>, 1163 <&gcc GCC_BIMC_GFX_CLK>, 1164 <&gcc GCC_BIMC_GPU_CLK>, 1165 <&gcc GFX3D_CLK_SRC>; 1166 power-domains = <&gcc OXILI_GDSC>; 1167 operating-points-v2 = <&gpu_opp_table>; 1168 iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; 1169 1170 gpu_opp_table: opp-table { 1171 compatible = "operating-points-v2"; 1172 1173 opp-400000000 { 1174 opp-hz = /bits/ 64 <400000000>; 1175 }; 1176 opp-19200000 { 1177 opp-hz = /bits/ 64 <19200000>; 1178 }; 1179 }; 1180 }; 1181 1182 venus: video-codec@1d00000 { 1183 compatible = "qcom,msm8916-venus"; 1184 reg = <0x01d00000 0xff000>; 1185 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 1186 power-domains = <&gcc VENUS_GDSC>; 1187 clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, 1188 <&gcc GCC_VENUS0_AHB_CLK>, 1189 <&gcc GCC_VENUS0_AXI_CLK>; 1190 clock-names = "core", "iface", "bus"; 1191 iommus = <&apps_iommu 5>; 1192 memory-region = <&venus_mem>; 1193 status = "okay"; 1194 1195 video-decoder { 1196 compatible = "venus-decoder"; 1197 }; 1198 1199 video-encoder { 1200 compatible = "venus-encoder"; 1201 }; 1202 }; 1203 1204 apps_iommu: iommu@1ef0000 { 1205 #address-cells = <1>; 1206 #size-cells = <1>; 1207 #iommu-cells = <1>; 1208 compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; 1209 ranges = <0 0x01e20000 0x40000>; 1210 reg = <0x01ef0000 0x3000>; 1211 clocks = <&gcc GCC_SMMU_CFG_CLK>, 1212 <&gcc GCC_APSS_TCU_CLK>; 1213 clock-names = "iface", "bus"; 1214 qcom,iommu-secure-id = <17>; 1215 1216 // vfe: 1217 iommu-ctx@3000 { 1218 compatible = "qcom,msm-iommu-v1-sec"; 1219 reg = <0x3000 0x1000>; 1220 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1221 }; 1222 1223 // mdp_0: 1224 iommu-ctx@4000 { 1225 compatible = "qcom,msm-iommu-v1-ns"; 1226 reg = <0x4000 0x1000>; 1227 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1228 }; 1229 1230 // venus_ns: 1231 iommu-ctx@5000 { 1232 compatible = "qcom,msm-iommu-v1-sec"; 1233 reg = <0x5000 0x1000>; 1234 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 1235 }; 1236 }; 1237 1238 gpu_iommu: iommu@1f08000 { 1239 #address-cells = <1>; 1240 #size-cells = <1>; 1241 #iommu-cells = <1>; 1242 compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; 1243 ranges = <0 0x01f08000 0x10000>; 1244 clocks = <&gcc GCC_SMMU_CFG_CLK>, 1245 <&gcc GCC_GFX_TCU_CLK>; 1246 clock-names = "iface", "bus"; 1247 qcom,iommu-secure-id = <18>; 1248 1249 // gfx3d_user: 1250 iommu-ctx@1000 { 1251 compatible = "qcom,msm-iommu-v1-ns"; 1252 reg = <0x1000 0x1000>; 1253 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; 1254 }; 1255 1256 // gfx3d_priv: 1257 iommu-ctx@2000 { 1258 compatible = "qcom,msm-iommu-v1-ns"; 1259 reg = <0x2000 0x1000>; 1260 interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; 1261 }; 1262 }; 1263 1264 spmi_bus: spmi@200f000 { 1265 compatible = "qcom,spmi-pmic-arb"; 1266 reg = <0x0200f000 0x001000>, 1267 <0x02400000 0x400000>, 1268 <0x02c00000 0x400000>, 1269 <0x03800000 0x200000>, 1270 <0x0200a000 0x002100>; 1271 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 1272 interrupt-names = "periph_irq"; 1273 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1274 qcom,ee = <0>; 1275 qcom,channel = <0>; 1276 #address-cells = <2>; 1277 #size-cells = <0>; 1278 interrupt-controller; 1279 #interrupt-cells = <4>; 1280 }; 1281 1282 mpss: remoteproc@4080000 { 1283 compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; 1284 reg = <0x04080000 0x100>, 1285 <0x04020000 0x040>; 1286 1287 reg-names = "qdsp6", "rmb"; 1288 1289 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, 1290 <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1291 <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1292 <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1293 <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1294 interrupt-names = "wdog", "fatal", "ready", 1295 "handover", "stop-ack"; 1296 1297 power-domains = <&rpmpd MSM8916_VDDCX>, 1298 <&rpmpd MSM8916_VDDMX>; 1299 power-domain-names = "cx", "mx"; 1300 1301 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, 1302 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 1303 <&gcc GCC_BOOT_ROM_AHB_CLK>, 1304 <&xo_board>; 1305 clock-names = "iface", "bus", "mem", "xo"; 1306 1307 qcom,smem-states = <&hexagon_smp2p_out 0>; 1308 qcom,smem-state-names = "stop"; 1309 1310 resets = <&scm 0>; 1311 reset-names = "mss_restart"; 1312 1313 qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; 1314 1315 status = "disabled"; 1316 1317 mba { 1318 memory-region = <&mba_mem>; 1319 }; 1320 1321 mpss { 1322 memory-region = <&mpss_mem>; 1323 }; 1324 1325 smd-edge { 1326 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; 1327 1328 qcom,smd-edge = <0>; 1329 qcom,ipc = <&apcs 8 12>; 1330 qcom,remote-pid = <1>; 1331 1332 label = "hexagon"; 1333 1334 fastrpc { 1335 compatible = "qcom,fastrpc"; 1336 qcom,smd-channels = "fastrpcsmd-apps-dsp"; 1337 label = "adsp"; 1338 1339 #address-cells = <1>; 1340 #size-cells = <0>; 1341 1342 cb@1 { 1343 compatible = "qcom,fastrpc-compute-cb"; 1344 reg = <1>; 1345 }; 1346 }; 1347 }; 1348 }; 1349 1350 sound: sound@7702000 { 1351 status = "disabled"; 1352 compatible = "qcom,apq8016-sbc-sndcard"; 1353 reg = <0x07702000 0x4>, <0x07702004 0x4>; 1354 reg-names = "mic-iomux", "spkr-iomux"; 1355 }; 1356 1357 lpass: audio-controller@7708000 { 1358 status = "disabled"; 1359 compatible = "qcom,lpass-cpu-apq8016"; 1360 clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, 1361 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, 1362 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, 1363 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, 1364 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, 1365 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, 1366 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; 1367 1368 clock-names = "ahbix-clk", 1369 "pcnoc-mport-clk", 1370 "pcnoc-sway-clk", 1371 "mi2s-bit-clk0", 1372 "mi2s-bit-clk1", 1373 "mi2s-bit-clk2", 1374 "mi2s-bit-clk3"; 1375 #sound-dai-cells = <1>; 1376 1377 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; 1378 interrupt-names = "lpass-irq-lpaif"; 1379 reg = <0x07708000 0x10000>; 1380 reg-names = "lpass-lpaif"; 1381 1382 #address-cells = <1>; 1383 #size-cells = <0>; 1384 }; 1385 1386 lpass_codec: audio-codec@771c000 { 1387 compatible = "qcom,msm8916-wcd-digital-codec"; 1388 reg = <0x0771c000 0x400>; 1389 clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, 1390 <&gcc GCC_CODEC_DIGCODEC_CLK>; 1391 clock-names = "ahbix-clk", "mclk"; 1392 #sound-dai-cells = <1>; 1393 }; 1394 1395 sdhc_1: sdhci@7824000 { 1396 compatible = "qcom,sdhci-msm-v4"; 1397 reg = <0x07824900 0x11c>, <0x07824000 0x800>; 1398 reg-names = "hc_mem", "core_mem"; 1399 1400 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1401 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 1402 interrupt-names = "hc_irq", "pwr_irq"; 1403 clocks = <&gcc GCC_SDCC1_APPS_CLK>, 1404 <&gcc GCC_SDCC1_AHB_CLK>, 1405 <&xo_board>; 1406 clock-names = "core", "iface", "xo"; 1407 mmc-ddr-1_8v; 1408 bus-width = <8>; 1409 non-removable; 1410 status = "disabled"; 1411 }; 1412 1413 sdhc_2: sdhci@7864000 { 1414 compatible = "qcom,sdhci-msm-v4"; 1415 reg = <0x07864900 0x11c>, <0x07864000 0x800>; 1416 reg-names = "hc_mem", "core_mem"; 1417 1418 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1419 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 1420 interrupt-names = "hc_irq", "pwr_irq"; 1421 clocks = <&gcc GCC_SDCC2_APPS_CLK>, 1422 <&gcc GCC_SDCC2_AHB_CLK>, 1423 <&xo_board>; 1424 clock-names = "core", "iface", "xo"; 1425 bus-width = <4>; 1426 status = "disabled"; 1427 }; 1428 1429 blsp_dma: dma-controller@7884000 { 1430 compatible = "qcom,bam-v1.7.0"; 1431 reg = <0x07884000 0x23000>; 1432 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 1433 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 1434 clock-names = "bam_clk"; 1435 #dma-cells = <1>; 1436 qcom,ee = <0>; 1437 status = "disabled"; 1438 }; 1439 1440 blsp1_uart1: serial@78af000 { 1441 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1442 reg = <0x078af000 0x200>; 1443 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1444 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 1445 clock-names = "core", "iface"; 1446 dmas = <&blsp_dma 1>, <&blsp_dma 0>; 1447 dma-names = "rx", "tx"; 1448 pinctrl-names = "default", "sleep"; 1449 pinctrl-0 = <&blsp1_uart1_default>; 1450 pinctrl-1 = <&blsp1_uart1_sleep>; 1451 status = "disabled"; 1452 }; 1453 1454 blsp1_uart2: serial@78b0000 { 1455 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1456 reg = <0x078b0000 0x200>; 1457 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 1458 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 1459 clock-names = "core", "iface"; 1460 dmas = <&blsp_dma 3>, <&blsp_dma 2>; 1461 dma-names = "rx", "tx"; 1462 pinctrl-names = "default", "sleep"; 1463 pinctrl-0 = <&blsp1_uart2_default>; 1464 pinctrl-1 = <&blsp1_uart2_sleep>; 1465 status = "disabled"; 1466 }; 1467 1468 blsp_i2c1: i2c@78b5000 { 1469 compatible = "qcom,i2c-qup-v2.2.1"; 1470 reg = <0x078b5000 0x500>; 1471 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1472 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1473 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; 1474 clock-names = "iface", "core"; 1475 pinctrl-names = "default", "sleep"; 1476 pinctrl-0 = <&i2c1_default>; 1477 pinctrl-1 = <&i2c1_sleep>; 1478 #address-cells = <1>; 1479 #size-cells = <0>; 1480 status = "disabled"; 1481 }; 1482 1483 blsp_spi1: spi@78b5000 { 1484 compatible = "qcom,spi-qup-v2.2.1"; 1485 reg = <0x078b5000 0x500>; 1486 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1487 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 1488 <&gcc GCC_BLSP1_AHB_CLK>; 1489 clock-names = "core", "iface"; 1490 dmas = <&blsp_dma 5>, <&blsp_dma 4>; 1491 dma-names = "rx", "tx"; 1492 pinctrl-names = "default", "sleep"; 1493 pinctrl-0 = <&spi1_default>; 1494 pinctrl-1 = <&spi1_sleep>; 1495 #address-cells = <1>; 1496 #size-cells = <0>; 1497 status = "disabled"; 1498 }; 1499 1500 blsp_i2c2: i2c@78b6000 { 1501 compatible = "qcom,i2c-qup-v2.2.1"; 1502 reg = <0x078b6000 0x500>; 1503 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1504 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1505 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; 1506 clock-names = "iface", "core"; 1507 pinctrl-names = "default", "sleep"; 1508 pinctrl-0 = <&i2c2_default>; 1509 pinctrl-1 = <&i2c2_sleep>; 1510 #address-cells = <1>; 1511 #size-cells = <0>; 1512 status = "disabled"; 1513 }; 1514 1515 blsp_spi2: spi@78b6000 { 1516 compatible = "qcom,spi-qup-v2.2.1"; 1517 reg = <0x078b6000 0x500>; 1518 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1519 clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, 1520 <&gcc GCC_BLSP1_AHB_CLK>; 1521 clock-names = "core", "iface"; 1522 dmas = <&blsp_dma 7>, <&blsp_dma 6>; 1523 dma-names = "rx", "tx"; 1524 pinctrl-names = "default", "sleep"; 1525 pinctrl-0 = <&spi2_default>; 1526 pinctrl-1 = <&spi2_sleep>; 1527 #address-cells = <1>; 1528 #size-cells = <0>; 1529 status = "disabled"; 1530 }; 1531 1532 blsp_i2c3: i2c@78b7000 { 1533 compatible = "qcom,i2c-qup-v2.2.1"; 1534 reg = <0x078b7000 0x500>; 1535 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1536 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1537 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; 1538 clock-names = "iface", "core"; 1539 pinctrl-names = "default", "sleep"; 1540 pinctrl-0 = <&i2c3_default>; 1541 pinctrl-1 = <&i2c3_sleep>; 1542 #address-cells = <1>; 1543 #size-cells = <0>; 1544 status = "disabled"; 1545 }; 1546 1547 blsp_spi3: spi@78b7000 { 1548 compatible = "qcom,spi-qup-v2.2.1"; 1549 reg = <0x078b7000 0x500>; 1550 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1551 clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, 1552 <&gcc GCC_BLSP1_AHB_CLK>; 1553 clock-names = "core", "iface"; 1554 dmas = <&blsp_dma 9>, <&blsp_dma 8>; 1555 dma-names = "rx", "tx"; 1556 pinctrl-names = "default", "sleep"; 1557 pinctrl-0 = <&spi3_default>; 1558 pinctrl-1 = <&spi3_sleep>; 1559 #address-cells = <1>; 1560 #size-cells = <0>; 1561 status = "disabled"; 1562 }; 1563 1564 blsp_i2c4: i2c@78b8000 { 1565 compatible = "qcom,i2c-qup-v2.2.1"; 1566 reg = <0x078b8000 0x500>; 1567 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1568 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1569 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; 1570 clock-names = "iface", "core"; 1571 pinctrl-names = "default", "sleep"; 1572 pinctrl-0 = <&i2c4_default>; 1573 pinctrl-1 = <&i2c4_sleep>; 1574 #address-cells = <1>; 1575 #size-cells = <0>; 1576 status = "disabled"; 1577 }; 1578 1579 blsp_spi4: spi@78b8000 { 1580 compatible = "qcom,spi-qup-v2.2.1"; 1581 reg = <0x078b8000 0x500>; 1582 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1583 clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, 1584 <&gcc GCC_BLSP1_AHB_CLK>; 1585 clock-names = "core", "iface"; 1586 dmas = <&blsp_dma 11>, <&blsp_dma 10>; 1587 dma-names = "rx", "tx"; 1588 pinctrl-names = "default", "sleep"; 1589 pinctrl-0 = <&spi4_default>; 1590 pinctrl-1 = <&spi4_sleep>; 1591 #address-cells = <1>; 1592 #size-cells = <0>; 1593 status = "disabled"; 1594 }; 1595 1596 blsp_i2c5: i2c@78b9000 { 1597 compatible = "qcom,i2c-qup-v2.2.1"; 1598 reg = <0x078b9000 0x500>; 1599 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1600 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1601 <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; 1602 clock-names = "iface", "core"; 1603 pinctrl-names = "default", "sleep"; 1604 pinctrl-0 = <&i2c5_default>; 1605 pinctrl-1 = <&i2c5_sleep>; 1606 #address-cells = <1>; 1607 #size-cells = <0>; 1608 status = "disabled"; 1609 }; 1610 1611 blsp_spi5: spi@78b9000 { 1612 compatible = "qcom,spi-qup-v2.2.1"; 1613 reg = <0x078b9000 0x500>; 1614 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 1615 clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, 1616 <&gcc GCC_BLSP1_AHB_CLK>; 1617 clock-names = "core", "iface"; 1618 dmas = <&blsp_dma 13>, <&blsp_dma 12>; 1619 dma-names = "rx", "tx"; 1620 pinctrl-names = "default", "sleep"; 1621 pinctrl-0 = <&spi5_default>; 1622 pinctrl-1 = <&spi5_sleep>; 1623 #address-cells = <1>; 1624 #size-cells = <0>; 1625 status = "disabled"; 1626 }; 1627 1628 blsp_i2c6: i2c@78ba000 { 1629 compatible = "qcom,i2c-qup-v2.2.1"; 1630 reg = <0x078ba000 0x500>; 1631 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 1632 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 1633 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; 1634 clock-names = "iface", "core"; 1635 pinctrl-names = "default", "sleep"; 1636 pinctrl-0 = <&i2c6_default>; 1637 pinctrl-1 = <&i2c6_sleep>; 1638 #address-cells = <1>; 1639 #size-cells = <0>; 1640 status = "disabled"; 1641 }; 1642 1643 blsp_spi6: spi@78ba000 { 1644 compatible = "qcom,spi-qup-v2.2.1"; 1645 reg = <0x078ba000 0x500>; 1646 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 1647 clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, 1648 <&gcc GCC_BLSP1_AHB_CLK>; 1649 clock-names = "core", "iface"; 1650 dmas = <&blsp_dma 15>, <&blsp_dma 14>; 1651 dma-names = "rx", "tx"; 1652 pinctrl-names = "default", "sleep"; 1653 pinctrl-0 = <&spi6_default>; 1654 pinctrl-1 = <&spi6_sleep>; 1655 #address-cells = <1>; 1656 #size-cells = <0>; 1657 status = "disabled"; 1658 }; 1659 1660 usb: usb@78d9000 { 1661 compatible = "qcom,ci-hdrc"; 1662 reg = <0x078d9000 0x200>, 1663 <0x078d9200 0x200>; 1664 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 1665 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 1666 clocks = <&gcc GCC_USB_HS_AHB_CLK>, 1667 <&gcc GCC_USB_HS_SYSTEM_CLK>; 1668 clock-names = "iface", "core"; 1669 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; 1670 assigned-clock-rates = <80000000>; 1671 resets = <&gcc GCC_USB_HS_BCR>; 1672 reset-names = "core"; 1673 phy_type = "ulpi"; 1674 dr_mode = "otg"; 1675 hnp-disable; 1676 srp-disable; 1677 adp-disable; 1678 ahb-burst-config = <0>; 1679 phy-names = "usb-phy"; 1680 phys = <&usb_hs_phy>; 1681 status = "disabled"; 1682 #reset-cells = <1>; 1683 1684 ulpi { 1685 usb_hs_phy: phy { 1686 compatible = "qcom,usb-hs-phy-msm8916", 1687 "qcom,usb-hs-phy"; 1688 #phy-cells = <0>; 1689 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 1690 clock-names = "ref", "sleep"; 1691 resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; 1692 reset-names = "phy", "por"; 1693 qcom,init-seq = /bits/ 8 <0x0 0x44 1694 0x1 0x6b 0x2 0x24 0x3 0x13>; 1695 }; 1696 }; 1697 }; 1698 1699 pronto: remoteproc@a21b000 { 1700 compatible = "qcom,pronto-v2-pil", "qcom,pronto"; 1701 reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; 1702 reg-names = "ccu", "dxe", "pmu"; 1703 1704 memory-region = <&wcnss_mem>; 1705 1706 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, 1707 <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1708 <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1709 <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1710 <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1711 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 1712 1713 power-domains = <&rpmpd MSM8916_VDDCX>, 1714 <&rpmpd MSM8916_VDDMX>; 1715 power-domain-names = "cx", "mx"; 1716 1717 qcom,state = <&wcnss_smp2p_out 0>; 1718 qcom,state-names = "stop"; 1719 1720 pinctrl-names = "default"; 1721 pinctrl-0 = <&wcnss_pin_a>; 1722 1723 status = "disabled"; 1724 1725 iris { 1726 compatible = "qcom,wcn3620"; 1727 1728 clocks = <&rpmcc RPM_SMD_RF_CLK2>; 1729 clock-names = "xo"; 1730 }; 1731 1732 smd-edge { 1733 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; 1734 1735 qcom,ipc = <&apcs 8 17>; 1736 qcom,smd-edge = <6>; 1737 qcom,remote-pid = <4>; 1738 1739 label = "pronto"; 1740 1741 wcnss { 1742 compatible = "qcom,wcnss"; 1743 qcom,smd-channels = "WCNSS_CTRL"; 1744 1745 qcom,mmio = <&pronto>; 1746 1747 bt { 1748 compatible = "qcom,wcnss-bt"; 1749 }; 1750 1751 wifi { 1752 compatible = "qcom,wcnss-wlan"; 1753 1754 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 1755 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 1756 interrupt-names = "tx", "rx"; 1757 1758 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; 1759 qcom,smem-state-names = "tx-enable", "tx-rings-empty"; 1760 }; 1761 }; 1762 }; 1763 }; 1764 1765 intc: interrupt-controller@b000000 { 1766 compatible = "qcom,msm-qgic2"; 1767 interrupt-controller; 1768 #interrupt-cells = <3>; 1769 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 1770 }; 1771 1772 apcs: mailbox@b011000 { 1773 compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; 1774 reg = <0x0b011000 0x1000>; 1775 #mbox-cells = <1>; 1776 clocks = <&a53pll>, <&gcc GPLL0_VOTE>; 1777 clock-names = "pll", "aux"; 1778 #clock-cells = <0>; 1779 }; 1780 1781 a53pll: clock@b016000 { 1782 compatible = "qcom,msm8916-a53pll"; 1783 reg = <0x0b016000 0x40>; 1784 #clock-cells = <0>; 1785 }; 1786 1787 timer@b020000 { 1788 #address-cells = <1>; 1789 #size-cells = <1>; 1790 ranges; 1791 compatible = "arm,armv7-timer-mem"; 1792 reg = <0x0b020000 0x1000>; 1793 clock-frequency = <19200000>; 1794 1795 frame@b021000 { 1796 frame-number = <0>; 1797 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1798 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1799 reg = <0x0b021000 0x1000>, 1800 <0x0b022000 0x1000>; 1801 }; 1802 1803 frame@b023000 { 1804 frame-number = <1>; 1805 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1806 reg = <0x0b023000 0x1000>; 1807 status = "disabled"; 1808 }; 1809 1810 frame@b024000 { 1811 frame-number = <2>; 1812 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1813 reg = <0x0b024000 0x1000>; 1814 status = "disabled"; 1815 }; 1816 1817 frame@b025000 { 1818 frame-number = <3>; 1819 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1820 reg = <0x0b025000 0x1000>; 1821 status = "disabled"; 1822 }; 1823 1824 frame@b026000 { 1825 frame-number = <4>; 1826 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1827 reg = <0x0b026000 0x1000>; 1828 status = "disabled"; 1829 }; 1830 1831 frame@b027000 { 1832 frame-number = <5>; 1833 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1834 reg = <0x0b027000 0x1000>; 1835 status = "disabled"; 1836 }; 1837 1838 frame@b028000 { 1839 frame-number = <6>; 1840 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1841 reg = <0x0b028000 0x1000>; 1842 status = "disabled"; 1843 }; 1844 }; 1845 }; 1846 1847 thermal-zones { 1848 cpu0-1-thermal { 1849 polling-delay-passive = <250>; 1850 polling-delay = <1000>; 1851 1852 thermal-sensors = <&tsens 5>; 1853 1854 trips { 1855 cpu0_1_alert0: trip-point0 { 1856 temperature = <75000>; 1857 hysteresis = <2000>; 1858 type = "passive"; 1859 }; 1860 cpu0_1_crit: cpu_crit { 1861 temperature = <110000>; 1862 hysteresis = <2000>; 1863 type = "critical"; 1864 }; 1865 }; 1866 1867 cooling-maps { 1868 map0 { 1869 trip = <&cpu0_1_alert0>; 1870 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1871 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1872 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1873 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1874 }; 1875 }; 1876 }; 1877 1878 cpu2-3-thermal { 1879 polling-delay-passive = <250>; 1880 polling-delay = <1000>; 1881 1882 thermal-sensors = <&tsens 4>; 1883 1884 trips { 1885 cpu2_3_alert0: trip-point0 { 1886 temperature = <75000>; 1887 hysteresis = <2000>; 1888 type = "passive"; 1889 }; 1890 cpu2_3_crit: cpu_crit { 1891 temperature = <110000>; 1892 hysteresis = <2000>; 1893 type = "critical"; 1894 }; 1895 }; 1896 1897 cooling-maps { 1898 map0 { 1899 trip = <&cpu2_3_alert0>; 1900 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1901 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1902 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 1903 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1904 }; 1905 }; 1906 }; 1907 1908 gpu-thermal { 1909 polling-delay-passive = <250>; 1910 polling-delay = <1000>; 1911 1912 thermal-sensors = <&tsens 2>; 1913 1914 trips { 1915 gpu_alert0: trip-point0 { 1916 temperature = <75000>; 1917 hysteresis = <2000>; 1918 type = "passive"; 1919 }; 1920 gpu_crit: gpu_crit { 1921 temperature = <95000>; 1922 hysteresis = <2000>; 1923 type = "critical"; 1924 }; 1925 }; 1926 }; 1927 1928 camera-thermal { 1929 polling-delay-passive = <250>; 1930 polling-delay = <1000>; 1931 1932 thermal-sensors = <&tsens 1>; 1933 1934 trips { 1935 cam_alert0: trip-point0 { 1936 temperature = <75000>; 1937 hysteresis = <2000>; 1938 type = "hot"; 1939 }; 1940 }; 1941 }; 1942 1943 modem-thermal { 1944 polling-delay-passive = <250>; 1945 polling-delay = <1000>; 1946 1947 thermal-sensors = <&tsens 0>; 1948 1949 trips { 1950 modem_alert0: trip-point0 { 1951 temperature = <85000>; 1952 hysteresis = <2000>; 1953 type = "hot"; 1954 }; 1955 }; 1956 }; 1957 1958 }; 1959 1960 timer { 1961 compatible = "arm,armv8-timer"; 1962 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1963 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1964 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 1965 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 1966 }; 1967}; 1968 1969#include "msm8916-pins.dtsi" 1970