1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-pm8916.dtsi"
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/leds/common.h>
10
11/ {
12	model = "Longcheer L8150";
13	compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
14	chassis-type = "handset";
15
16	aliases {
17		serial0 = &blsp1_uart2;
18	};
19
20	chosen {
21		stdout-path = "serial0";
22	};
23
24	reserved-memory {
25		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
26		/delete-node/ wcnss@89300000;
27
28		wcnss_mem: wcnss@8b600000 {
29			reg = <0x0 0x8b600000 0x0 0x600000>;
30			no-map;
31		};
32	};
33
34	gpio-keys {
35		compatible = "gpio-keys";
36
37		pinctrl-names = "default";
38		pinctrl-0 = <&gpio_keys_default>;
39
40		label = "GPIO Buttons";
41
42		button-volume-up {
43			label = "Volume Up";
44			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
45			linux,code = <KEY_VOLUMEUP>;
46		};
47	};
48
49	reg_ctp: regulator-ctp {
50		compatible = "regulator-fixed";
51		regulator-name = "ctp";
52
53		regulator-min-microvolt = <2800000>;
54		regulator-max-microvolt = <2800000>;
55
56		gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
57		enable-active-high;
58
59		pinctrl-names = "default";
60		pinctrl-0 = <&ctp_pwr_en_default>;
61	};
62
63	flash-led-controller {
64		compatible = "sgmicro,sgm3140";
65		flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
66		enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
67
68		pinctrl-names = "default";
69		pinctrl-0 = <&camera_flash_default>;
70
71		flash_led: led {
72			function = LED_FUNCTION_FLASH;
73			color = <LED_COLOR_ID_WHITE>;
74			flash-max-timeout-us = <250000>;
75		};
76	};
77};
78
79&blsp_i2c1 {
80	status = "okay";
81
82	led-controller@45 {
83		compatible = "awinic,aw2013";
84		reg = <0x45>;
85		#address-cells = <1>;
86		#size-cells = <0>;
87
88		vcc-supply = <&pm8916_l17>;
89
90		led@0 {
91			reg = <0>;
92			led-max-microamp = <5000>;
93			function = LED_FUNCTION_INDICATOR;
94			color = <LED_COLOR_ID_RED>;
95		};
96
97		led@1 {
98			reg = <1>;
99			led-max-microamp = <5000>;
100			function = LED_FUNCTION_INDICATOR;
101			color = <LED_COLOR_ID_GREEN>;
102		};
103
104		led@2 {
105			reg = <2>;
106			led-max-microamp = <5000>;
107			function = LED_FUNCTION_INDICATOR;
108			color = <LED_COLOR_ID_BLUE>;
109		};
110	};
111};
112
113&blsp_i2c2 {
114	status = "okay";
115
116	accelerometer@10 {
117		compatible = "bosch,bmc156_accel";
118		reg = <0x10>;
119
120		/*
121		 * For some reason the interrupt line is usually not connected
122		 * to the BMC156. However, there are two pads next to the chip
123		 * that can be shorted to make it work if needed.
124		 *
125		 * interrupt-parent = <&msmgpio>;
126		 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
127		 */
128
129		pinctrl-names = "default";
130		pinctrl-0 = <&accel_int_default>;
131
132		vdd-supply = <&pm8916_l17>;
133		vddio-supply = <&pm8916_l6>;
134
135		mount-matrix = "0", "1", "0",
136			      "-1", "0", "0",
137			       "0", "0", "1";
138	};
139
140	magnetometer@12 {
141		compatible = "bosch,bmc156_magn";
142		reg = <0x12>;
143
144		interrupt-parent = <&msmgpio>;
145		interrupts = <113 IRQ_TYPE_EDGE_RISING>;
146
147		pinctrl-names = "default";
148		pinctrl-0 = <&magn_int_default>;
149
150		vdd-supply = <&pm8916_l17>;
151		vddio-supply = <&pm8916_l6>;
152	};
153
154	light-sensor@23 {
155		compatible = "liteon,ltr559";
156		reg = <0x23>;
157		proximity-near-level = <75>;
158
159		interrupt-parent = <&msmgpio>;
160		interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
161
162		pinctrl-names = "default";
163		pinctrl-0 = <&light_int_default>;
164
165		vdd-supply = <&pm8916_l17>;
166		vio-supply = <&pm8916_l6>;
167	};
168
169	gyroscope@68 {
170		compatible = "bosch,bmg160";
171		reg = <0x68>;
172
173		interrupt-parent = <&msmgpio>;
174		interrupts = <23 IRQ_TYPE_EDGE_RISING>,
175			     <22 IRQ_TYPE_EDGE_RISING>;
176
177		pinctrl-names = "default";
178		pinctrl-0 = <&gyro_int_default>;
179
180		vdd-supply = <&pm8916_l17>;
181		vddio-supply = <&pm8916_l6>;
182	};
183};
184
185&blsp_i2c5 {
186	status = "okay";
187
188	rmi4@20 {
189		compatible = "syna,rmi4-i2c";
190		reg = <0x20>;
191		#address-cells = <1>;
192		#size-cells = <0>;
193
194		interrupt-parent = <&msmgpio>;
195		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
196
197		vdd-supply = <&reg_ctp>;
198		vio-supply = <&pm8916_l6>;
199
200		pinctrl-names = "default";
201		pinctrl-0 = <&tp_int_default>;
202
203		syna,startup-delay-ms = <10>;
204
205		rmi4-f01@1 {
206			reg = <0x1>;
207			syna,nosleep-mode = <1>; /* Allow sleeping */
208		};
209
210		rmi4-f12@12 {
211			reg = <0x12>;
212			syna,sensor-type = <1>; /* Touchscreen */
213		};
214	};
215};
216
217&blsp1_uart2 {
218	status = "okay";
219};
220
221&pm8916_resin {
222	status = "okay";
223	linux,code = <KEY_VOLUMEDOWN>;
224};
225
226&pm8916_usbin {
227	status = "okay";
228};
229
230&pm8916_vib {
231	status = "okay";
232};
233
234&pronto {
235	status = "okay";
236};
237
238&sdhc_1 {
239	status = "okay";
240
241	pinctrl-names = "default", "sleep";
242	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
243	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
244};
245
246&sdhc_2 {
247	status = "okay";
248
249	pinctrl-names = "default", "sleep";
250	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
251	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
252
253	non-removable;
254};
255
256&usb {
257	status = "okay";
258	dr_mode = "peripheral";
259	extcon = <&pm8916_usbin>;
260};
261
262&usb_hs_phy {
263	extcon = <&pm8916_usbin>;
264};
265
266&smd_rpm_regulators {
267	vdd_l1_l2_l3-supply = <&pm8916_s3>;
268	vdd_l4_l5_l6-supply = <&pm8916_s4>;
269	vdd_l7-supply = <&pm8916_s4>;
270
271	s3 {
272		regulator-min-microvolt = <1200000>;
273		regulator-max-microvolt = <1300000>;
274	};
275
276	s4 {
277		regulator-min-microvolt = <1800000>;
278		regulator-max-microvolt = <2100000>;
279	};
280
281	l1 {
282		regulator-min-microvolt = <1225000>;
283		regulator-max-microvolt = <1225000>;
284	};
285
286	l2 {
287		regulator-min-microvolt = <1200000>;
288		regulator-max-microvolt = <1200000>;
289	};
290
291	l4 {
292		regulator-min-microvolt = <2050000>;
293		regulator-max-microvolt = <2050000>;
294	};
295
296	l5 {
297		regulator-min-microvolt = <1800000>;
298		regulator-max-microvolt = <1800000>;
299	};
300
301	l6 {
302		regulator-min-microvolt = <1800000>;
303		regulator-max-microvolt = <1800000>;
304	};
305
306	l7 {
307		regulator-min-microvolt = <1800000>;
308		regulator-max-microvolt = <1800000>;
309	};
310
311	l8 {
312		regulator-min-microvolt = <2850000>;
313		regulator-max-microvolt = <2900000>;
314	};
315
316	l9 {
317		regulator-min-microvolt = <3300000>;
318		regulator-max-microvolt = <3300000>;
319	};
320
321	l10 {
322		regulator-min-microvolt = <2700000>;
323		regulator-max-microvolt = <2800000>;
324	};
325
326	l11 {
327		regulator-min-microvolt = <1800000>;
328		regulator-max-microvolt = <2950000>;
329		regulator-allow-set-load;
330		regulator-system-load = <200000>;
331	};
332
333	l12 {
334		regulator-min-microvolt = <1800000>;
335		regulator-max-microvolt = <2950000>;
336	};
337
338	l13 {
339		regulator-min-microvolt = <3075000>;
340		regulator-max-microvolt = <3075000>;
341	};
342
343	l14 {
344		regulator-min-microvolt = <1800000>;
345		regulator-max-microvolt = <3300000>;
346	};
347
348	l15 {
349		regulator-min-microvolt = <1800000>;
350		regulator-max-microvolt = <3300000>;
351	};
352
353	l16 {
354		regulator-min-microvolt = <1800000>;
355		regulator-max-microvolt = <3300000>;
356	};
357
358	l17 {
359		regulator-min-microvolt = <2850000>;
360		regulator-max-microvolt = <2850000>;
361	};
362
363	l18 {
364		regulator-min-microvolt = <2700000>;
365		regulator-max-microvolt = <2700000>;
366	};
367};
368
369&msmgpio {
370	accel_int_default: accel-int-default-state {
371		pins = "gpio116";
372		function = "gpio";
373
374		drive-strength = <2>;
375		bias-disable;
376	};
377
378	camera_flash_default: camera-flash-default-state {
379		pins = "gpio31", "gpio32";
380		function = "gpio";
381
382		drive-strength = <2>;
383		bias-disable;
384	};
385
386	ctp_pwr_en_default: ctp-pwr-en-default-state {
387		pins = "gpio17";
388		function = "gpio";
389
390		drive-strength = <2>;
391		bias-disable;
392	};
393
394	gpio_keys_default: gpio-keys-default-state {
395		pins = "gpio107";
396		function = "gpio";
397
398		drive-strength = <2>;
399		bias-pull-up;
400	};
401
402	gyro_int_default: gyro-int-default-state {
403		pins = "gpio22", "gpio23";
404		function = "gpio";
405
406		drive-strength = <2>;
407		bias-disable;
408	};
409
410	light_int_default: light-int-default-state {
411		pins = "gpio115";
412		function = "gpio";
413
414		drive-strength = <2>;
415		bias-disable;
416	};
417
418	magn_int_default: magn-int-default-state {
419		pins = "gpio113";
420		function = "gpio";
421
422		drive-strength = <2>;
423		bias-disable;
424	};
425
426	tp_int_default: tp-int-default-state {
427		pins = "gpio13";
428		function = "gpio";
429
430		drive-strength = <2>;
431		bias-disable;
432	};
433};
434