1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-ipq8074.h> 8 9/ { 10 #address-cells = <2>; 11 #size-cells = <2>; 12 13 model = "Qualcomm Technologies, Inc. IPQ8074"; 14 compatible = "qcom,ipq8074"; 15 interrupt-parent = <&intc>; 16 17 clocks { 18 sleep_clk: sleep_clk { 19 compatible = "fixed-clock"; 20 clock-frequency = <32768>; 21 #clock-cells = <0>; 22 }; 23 24 xo: xo { 25 compatible = "fixed-clock"; 26 clock-frequency = <19200000>; 27 #clock-cells = <0>; 28 }; 29 }; 30 31 cpus { 32 #address-cells = <0x1>; 33 #size-cells = <0x0>; 34 35 CPU0: cpu@0 { 36 device_type = "cpu"; 37 compatible = "arm,cortex-a53"; 38 reg = <0x0>; 39 next-level-cache = <&L2_0>; 40 enable-method = "psci"; 41 }; 42 43 CPU1: cpu@1 { 44 device_type = "cpu"; 45 compatible = "arm,cortex-a53"; 46 enable-method = "psci"; 47 reg = <0x1>; 48 next-level-cache = <&L2_0>; 49 }; 50 51 CPU2: cpu@2 { 52 device_type = "cpu"; 53 compatible = "arm,cortex-a53"; 54 enable-method = "psci"; 55 reg = <0x2>; 56 next-level-cache = <&L2_0>; 57 }; 58 59 CPU3: cpu@3 { 60 device_type = "cpu"; 61 compatible = "arm,cortex-a53"; 62 enable-method = "psci"; 63 reg = <0x3>; 64 next-level-cache = <&L2_0>; 65 }; 66 67 L2_0: l2-cache { 68 compatible = "cache"; 69 cache-level = <0x2>; 70 }; 71 }; 72 73 pmu { 74 compatible = "arm,cortex-a53-pmu"; 75 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 76 }; 77 78 psci { 79 compatible = "arm,psci-1.0"; 80 method = "smc"; 81 }; 82 83 reserved-memory { 84 #address-cells = <2>; 85 #size-cells = <2>; 86 ranges; 87 88 smem@4ab00000 { 89 compatible = "qcom,smem"; 90 reg = <0x0 0x4ab00000 0x0 0x00100000>; 91 no-map; 92 93 hwlocks = <&tcsr_mutex 0>; 94 }; 95 96 memory@4ac00000 { 97 no-map; 98 reg = <0x0 0x4ac00000 0x0 0x00400000>; 99 }; 100 }; 101 102 firmware { 103 scm { 104 compatible = "qcom,scm-ipq8074", "qcom,scm"; 105 }; 106 }; 107 108 soc: soc { 109 #address-cells = <0x1>; 110 #size-cells = <0x1>; 111 ranges = <0 0 0 0xffffffff>; 112 compatible = "simple-bus"; 113 114 ssphy_1: phy@58000 { 115 compatible = "qcom,ipq8074-qmp-usb3-phy"; 116 reg = <0x00058000 0x1c4>; 117 #address-cells = <1>; 118 #size-cells = <1>; 119 ranges; 120 121 clocks = <&gcc GCC_USB1_AUX_CLK>, 122 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 123 <&xo>; 124 clock-names = "aux", "cfg_ahb", "ref"; 125 126 resets = <&gcc GCC_USB1_PHY_BCR>, 127 <&gcc GCC_USB3PHY_1_PHY_BCR>; 128 reset-names = "phy","common"; 129 status = "disabled"; 130 131 usb1_ssphy: phy@58200 { 132 reg = <0x00058200 0x130>, /* Tx */ 133 <0x00058400 0x200>, /* Rx */ 134 <0x00058800 0x1f8>, /* PCS */ 135 <0x00058600 0x044>; /* PCS misc*/ 136 #phy-cells = <0>; 137 #clock-cells = <0>; 138 clocks = <&gcc GCC_USB1_PIPE_CLK>; 139 clock-names = "pipe0"; 140 clock-output-names = "gcc_usb1_pipe_clk_src"; 141 }; 142 }; 143 144 qusb_phy_1: phy@59000 { 145 compatible = "qcom,ipq8074-qusb2-phy"; 146 reg = <0x00059000 0x180>; 147 #phy-cells = <0>; 148 149 clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 150 <&xo>; 151 clock-names = "cfg_ahb", "ref"; 152 153 resets = <&gcc GCC_QUSB2_1_PHY_BCR>; 154 status = "disabled"; 155 }; 156 157 ssphy_0: phy@78000 { 158 compatible = "qcom,ipq8074-qmp-usb3-phy"; 159 reg = <0x00078000 0x1c4>; 160 #address-cells = <1>; 161 #size-cells = <1>; 162 ranges; 163 164 clocks = <&gcc GCC_USB0_AUX_CLK>, 165 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 166 <&xo>; 167 clock-names = "aux", "cfg_ahb", "ref"; 168 169 resets = <&gcc GCC_USB0_PHY_BCR>, 170 <&gcc GCC_USB3PHY_0_PHY_BCR>; 171 reset-names = "phy","common"; 172 status = "disabled"; 173 174 usb0_ssphy: phy@78200 { 175 reg = <0x00078200 0x130>, /* Tx */ 176 <0x00078400 0x200>, /* Rx */ 177 <0x00078800 0x1f8>, /* PCS */ 178 <0x00078600 0x044>; /* PCS misc*/ 179 #phy-cells = <0>; 180 #clock-cells = <0>; 181 clocks = <&gcc GCC_USB0_PIPE_CLK>; 182 clock-names = "pipe0"; 183 clock-output-names = "gcc_usb0_pipe_clk_src"; 184 }; 185 }; 186 187 qusb_phy_0: phy@79000 { 188 compatible = "qcom,ipq8074-qusb2-phy"; 189 reg = <0x00079000 0x180>; 190 #phy-cells = <0>; 191 192 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 193 <&xo>; 194 clock-names = "cfg_ahb", "ref"; 195 196 resets = <&gcc GCC_QUSB2_0_PHY_BCR>; 197 status = "disabled"; 198 }; 199 200 pcie_qmp0: phy@86000 { 201 compatible = "qcom,ipq8074-qmp-pcie-phy"; 202 reg = <0x00086000 0x1c4>; 203 #address-cells = <1>; 204 #size-cells = <1>; 205 ranges; 206 207 clocks = <&gcc GCC_PCIE0_AUX_CLK>, 208 <&gcc GCC_PCIE0_AHB_CLK>; 209 clock-names = "aux", "cfg_ahb"; 210 resets = <&gcc GCC_PCIE0_PHY_BCR>, 211 <&gcc GCC_PCIE0PHY_PHY_BCR>; 212 reset-names = "phy", 213 "common"; 214 status = "disabled"; 215 216 pcie_phy0: phy@86200 { 217 reg = <0x86200 0x16c>, 218 <0x86400 0x200>, 219 <0x86800 0x4f4>; 220 #phy-cells = <0>; 221 #clock-cells = <0>; 222 clocks = <&gcc GCC_PCIE0_PIPE_CLK>; 223 clock-names = "pipe0"; 224 clock-output-names = "pcie_0_pipe_clk"; 225 }; 226 }; 227 228 pcie_qmp1: phy@8e000 { 229 compatible = "qcom,ipq8074-qmp-pcie-phy"; 230 reg = <0x0008e000 0x1c4>; 231 #address-cells = <1>; 232 #size-cells = <1>; 233 ranges; 234 235 clocks = <&gcc GCC_PCIE1_AUX_CLK>, 236 <&gcc GCC_PCIE1_AHB_CLK>; 237 clock-names = "aux", "cfg_ahb"; 238 resets = <&gcc GCC_PCIE1_PHY_BCR>, 239 <&gcc GCC_PCIE1PHY_PHY_BCR>; 240 reset-names = "phy", 241 "common"; 242 status = "disabled"; 243 244 pcie_phy1: phy@8e200 { 245 reg = <0x8e200 0x16c>, 246 <0x8e400 0x200>, 247 <0x8e800 0x4f4>; 248 #phy-cells = <0>; 249 #clock-cells = <0>; 250 clocks = <&gcc GCC_PCIE1_PIPE_CLK>; 251 clock-names = "pipe0"; 252 clock-output-names = "pcie_1_pipe_clk"; 253 }; 254 }; 255 256 mdio: mdio@90000 { 257 compatible = "qcom,ipq4019-mdio"; 258 reg = <0x00090000 0x64>; 259 #address-cells = <1>; 260 #size-cells = <0>; 261 262 clocks = <&gcc GCC_MDIO_AHB_CLK>; 263 clock-names = "gcc_mdio_ahb_clk"; 264 265 status = "disabled"; 266 }; 267 268 prng: rng@e3000 { 269 compatible = "qcom,prng-ee"; 270 reg = <0x000e3000 0x1000>; 271 clocks = <&gcc GCC_PRNG_AHB_CLK>; 272 clock-names = "core"; 273 status = "disabled"; 274 }; 275 276 cryptobam: dma-controller@704000 { 277 compatible = "qcom,bam-v1.7.0"; 278 reg = <0x00704000 0x20000>; 279 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 280 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; 281 clock-names = "bam_clk"; 282 #dma-cells = <1>; 283 qcom,ee = <1>; 284 qcom,controlled-remotely; 285 status = "disabled"; 286 }; 287 288 crypto: crypto@73a000 { 289 compatible = "qcom,crypto-v5.1"; 290 reg = <0x0073a000 0x6000>; 291 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 292 <&gcc GCC_CRYPTO_AXI_CLK>, 293 <&gcc GCC_CRYPTO_CLK>; 294 clock-names = "iface", "bus", "core"; 295 dmas = <&cryptobam 2>, <&cryptobam 3>; 296 dma-names = "rx", "tx"; 297 status = "disabled"; 298 }; 299 300 tlmm: pinctrl@1000000 { 301 compatible = "qcom,ipq8074-pinctrl"; 302 reg = <0x01000000 0x300000>; 303 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 304 gpio-controller; 305 gpio-ranges = <&tlmm 0 0 70>; 306 #gpio-cells = <0x2>; 307 interrupt-controller; 308 #interrupt-cells = <0x2>; 309 310 serial_4_pins: serial4-pinmux { 311 pins = "gpio23", "gpio24"; 312 function = "blsp4_uart1"; 313 drive-strength = <8>; 314 bias-disable; 315 }; 316 317 i2c_0_pins: i2c-0-pinmux { 318 pins = "gpio42", "gpio43"; 319 function = "blsp1_i2c"; 320 drive-strength = <8>; 321 bias-disable; 322 }; 323 324 spi_0_pins: spi-0-pins { 325 pins = "gpio38", "gpio39", "gpio40", "gpio41"; 326 function = "blsp0_spi"; 327 drive-strength = <8>; 328 bias-disable; 329 }; 330 331 hsuart_pins: hsuart-pins { 332 pins = "gpio46", "gpio47", "gpio48", "gpio49"; 333 function = "blsp2_uart"; 334 drive-strength = <8>; 335 bias-disable; 336 }; 337 338 qpic_pins: qpic-pins { 339 pins = "gpio1", "gpio3", "gpio4", 340 "gpio5", "gpio6", "gpio7", 341 "gpio8", "gpio10", "gpio11", 342 "gpio12", "gpio13", "gpio14", 343 "gpio15", "gpio16", "gpio17"; 344 function = "qpic"; 345 drive-strength = <8>; 346 bias-disable; 347 }; 348 }; 349 350 gcc: gcc@1800000 { 351 compatible = "qcom,gcc-ipq8074"; 352 reg = <0x01800000 0x80000>; 353 #clock-cells = <0x1>; 354 #power-domain-cells = <1>; 355 #reset-cells = <0x1>; 356 }; 357 358 tcsr_mutex: hwlock@1905000 { 359 compatible = "qcom,tcsr-mutex"; 360 reg = <0x01905000 0x20000>; 361 #hwlock-cells = <1>; 362 }; 363 364 spmi_bus: spmi@200f000 { 365 compatible = "qcom,spmi-pmic-arb"; 366 reg = <0x0200f000 0x001000>, 367 <0x02400000 0x800000>, 368 <0x02c00000 0x800000>, 369 <0x03800000 0x200000>, 370 <0x0200a000 0x000700>; 371 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 372 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 373 interrupt-names = "periph_irq"; 374 qcom,ee = <0>; 375 qcom,channel = <0>; 376 #address-cells = <2>; 377 #size-cells = <0>; 378 interrupt-controller; 379 #interrupt-cells = <4>; 380 cell-index = <0>; 381 }; 382 383 sdhc_1: mmc@7824900 { 384 compatible = "qcom,sdhci-msm-v4"; 385 reg = <0x7824900 0x500>, <0x7824000 0x800>; 386 reg-names = "hc", "core"; 387 388 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 389 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 390 interrupt-names = "hc_irq", "pwr_irq"; 391 392 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 393 <&gcc GCC_SDCC1_APPS_CLK>, 394 <&xo>; 395 clock-names = "iface", "core", "xo"; 396 resets = <&gcc GCC_SDCC1_BCR>; 397 max-frequency = <384000000>; 398 mmc-ddr-1_8v; 399 mmc-hs200-1_8v; 400 mmc-hs400-1_8v; 401 bus-width = <8>; 402 403 status = "disabled"; 404 }; 405 406 blsp_dma: dma-controller@7884000 { 407 compatible = "qcom,bam-v1.7.0"; 408 reg = <0x07884000 0x2b000>; 409 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 410 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 411 clock-names = "bam_clk"; 412 #dma-cells = <1>; 413 qcom,ee = <0>; 414 }; 415 416 blsp1_uart1: serial@78af000 { 417 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 418 reg = <0x078af000 0x200>; 419 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 420 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 421 <&gcc GCC_BLSP1_AHB_CLK>; 422 clock-names = "core", "iface"; 423 status = "disabled"; 424 }; 425 426 blsp1_uart3: serial@78b1000 { 427 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 428 reg = <0x078b1000 0x200>; 429 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; 430 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, 431 <&gcc GCC_BLSP1_AHB_CLK>; 432 clock-names = "core", "iface"; 433 dmas = <&blsp_dma 4>, 434 <&blsp_dma 5>; 435 dma-names = "tx", "rx"; 436 pinctrl-0 = <&hsuart_pins>; 437 pinctrl-names = "default"; 438 status = "disabled"; 439 }; 440 441 blsp1_uart5: serial@78b3000 { 442 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 443 reg = <0x078b3000 0x200>; 444 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; 445 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, 446 <&gcc GCC_BLSP1_AHB_CLK>; 447 clock-names = "core", "iface"; 448 pinctrl-0 = <&serial_4_pins>; 449 pinctrl-names = "default"; 450 status = "disabled"; 451 }; 452 453 blsp1_spi1: spi@78b5000 { 454 compatible = "qcom,spi-qup-v2.2.1"; 455 #address-cells = <1>; 456 #size-cells = <0>; 457 reg = <0x078b5000 0x600>; 458 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 459 spi-max-frequency = <50000000>; 460 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 461 <&gcc GCC_BLSP1_AHB_CLK>; 462 clock-names = "core", "iface"; 463 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 464 dma-names = "tx", "rx"; 465 pinctrl-0 = <&spi_0_pins>; 466 pinctrl-names = "default"; 467 status = "disabled"; 468 }; 469 470 blsp1_i2c2: i2c@78b6000 { 471 compatible = "qcom,i2c-qup-v2.2.1"; 472 #address-cells = <1>; 473 #size-cells = <0>; 474 reg = <0x078b6000 0x600>; 475 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 476 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 477 <&gcc GCC_BLSP1_AHB_CLK>; 478 clock-names = "core", "iface"; 479 clock-frequency = <400000>; 480 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 481 dma-names = "tx", "rx"; 482 pinctrl-0 = <&i2c_0_pins>; 483 pinctrl-names = "default"; 484 status = "disabled"; 485 }; 486 487 blsp1_i2c3: i2c@78b7000 { 488 compatible = "qcom,i2c-qup-v2.2.1"; 489 #address-cells = <1>; 490 #size-cells = <0>; 491 reg = <0x078b7000 0x600>; 492 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 493 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 494 <&gcc GCC_BLSP1_AHB_CLK>; 495 clock-names = "core", "iface"; 496 clock-frequency = <100000>; 497 dmas = <&blsp_dma 16>, <&blsp_dma 17>; 498 dma-names = "tx", "rx"; 499 status = "disabled"; 500 }; 501 502 blsp1_i2c5: i2c@78b9000 { 503 compatible = "qcom,i2c-qup-v2.2.1"; 504 #address-cells = <1>; 505 #size-cells = <0>; 506 reg = <0x78b9000 0x600>; 507 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 508 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, 509 <&gcc GCC_BLSP1_AHB_CLK>; 510 clock-names = "core", "iface"; 511 clock-frequency = <400000>; 512 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 513 dma-names = "tx", "rx"; 514 status = "disabled"; 515 }; 516 517 blsp1_i2c6: i2c@78ba000 { 518 compatible = "qcom,i2c-qup-v2.2.1"; 519 #address-cells = <1>; 520 #size-cells = <0>; 521 reg = <0x078ba000 0x600>; 522 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 523 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, 524 <&gcc GCC_BLSP1_AHB_CLK>; 525 clock-names = "core", "iface"; 526 clock-frequency = <100000>; 527 dmas = <&blsp_dma 22>, <&blsp_dma 23>; 528 dma-names = "tx", "rx"; 529 status = "disabled"; 530 }; 531 532 qpic_bam: dma-controller@7984000 { 533 compatible = "qcom,bam-v1.7.0"; 534 reg = <0x07984000 0x1a000>; 535 interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 536 clocks = <&gcc GCC_QPIC_AHB_CLK>; 537 clock-names = "bam_clk"; 538 #dma-cells = <1>; 539 qcom,ee = <0>; 540 status = "disabled"; 541 }; 542 543 qpic_nand: nand-controller@79b0000 { 544 compatible = "qcom,ipq8074-nand"; 545 reg = <0x079b0000 0x10000>; 546 #address-cells = <1>; 547 #size-cells = <0>; 548 clocks = <&gcc GCC_QPIC_CLK>, 549 <&gcc GCC_QPIC_AHB_CLK>; 550 clock-names = "core", "aon"; 551 552 dmas = <&qpic_bam 0>, 553 <&qpic_bam 1>, 554 <&qpic_bam 2>; 555 dma-names = "tx", "rx", "cmd"; 556 pinctrl-0 = <&qpic_pins>; 557 pinctrl-names = "default"; 558 status = "disabled"; 559 }; 560 561 usb_0: usb@8af8800 { 562 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 563 reg = <0x08af8800 0x400>; 564 #address-cells = <1>; 565 #size-cells = <1>; 566 ranges; 567 568 clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 569 <&gcc GCC_USB0_MASTER_CLK>, 570 <&gcc GCC_USB0_SLEEP_CLK>, 571 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 572 clock-names = "cfg_noc", 573 "core", 574 "sleep", 575 "mock_utmi"; 576 577 assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 578 <&gcc GCC_USB0_MASTER_CLK>, 579 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 580 assigned-clock-rates = <133330000>, 581 <133330000>, 582 <19200000>; 583 584 power-domains = <&gcc USB0_GDSC>; 585 586 resets = <&gcc GCC_USB0_BCR>; 587 status = "disabled"; 588 589 dwc_0: usb@8a00000 { 590 compatible = "snps,dwc3"; 591 reg = <0x8a00000 0xcd00>; 592 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 593 phys = <&qusb_phy_0>, <&usb0_ssphy>; 594 phy-names = "usb2-phy", "usb3-phy"; 595 snps,is-utmi-l1-suspend; 596 snps,hird-threshold = /bits/ 8 <0x0>; 597 snps,dis_u2_susphy_quirk; 598 snps,dis_u3_susphy_quirk; 599 dr_mode = "host"; 600 }; 601 }; 602 603 usb_1: usb@8cf8800 { 604 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 605 reg = <0x08cf8800 0x400>; 606 #address-cells = <1>; 607 #size-cells = <1>; 608 ranges; 609 610 clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 611 <&gcc GCC_USB1_MASTER_CLK>, 612 <&gcc GCC_USB1_SLEEP_CLK>, 613 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 614 clock-names = "cfg_noc", 615 "core", 616 "sleep", 617 "mock_utmi"; 618 619 assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 620 <&gcc GCC_USB1_MASTER_CLK>, 621 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 622 assigned-clock-rates = <133330000>, 623 <133330000>, 624 <19200000>; 625 626 power-domains = <&gcc USB1_GDSC>; 627 628 resets = <&gcc GCC_USB1_BCR>; 629 status = "disabled"; 630 631 dwc_1: usb@8c00000 { 632 compatible = "snps,dwc3"; 633 reg = <0x8c00000 0xcd00>; 634 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 635 phys = <&qusb_phy_1>, <&usb1_ssphy>; 636 phy-names = "usb2-phy", "usb3-phy"; 637 snps,is-utmi-l1-suspend; 638 snps,hird-threshold = /bits/ 8 <0x0>; 639 snps,dis_u2_susphy_quirk; 640 snps,dis_u3_susphy_quirk; 641 dr_mode = "host"; 642 }; 643 }; 644 645 intc: interrupt-controller@b000000 { 646 compatible = "qcom,msm-qgic2"; 647 #address-cells = <1>; 648 #size-cells = <1>; 649 interrupt-controller; 650 #interrupt-cells = <0x3>; 651 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 652 ranges = <0 0xb00a000 0xffd>; 653 654 v2m@0 { 655 compatible = "arm,gic-v2m-frame"; 656 msi-controller; 657 reg = <0x0 0xffd>; 658 }; 659 }; 660 661 watchdog: watchdog@b017000 { 662 compatible = "qcom,kpss-wdt"; 663 reg = <0xb017000 0x1000>; 664 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 665 clocks = <&sleep_clk>; 666 timeout-sec = <30>; 667 }; 668 669 apcs_glb: mailbox@b111000 { 670 compatible = "qcom,ipq8074-apcs-apps-global"; 671 reg = <0x0b111000 0x6000>; 672 673 #clock-cells = <1>; 674 #mbox-cells = <1>; 675 }; 676 677 timer@b120000 { 678 #address-cells = <1>; 679 #size-cells = <1>; 680 ranges; 681 compatible = "arm,armv7-timer-mem"; 682 reg = <0x0b120000 0x1000>; 683 684 frame@b120000 { 685 frame-number = <0>; 686 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 687 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 688 reg = <0x0b121000 0x1000>, 689 <0x0b122000 0x1000>; 690 }; 691 692 frame@b123000 { 693 frame-number = <1>; 694 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 695 reg = <0x0b123000 0x1000>; 696 status = "disabled"; 697 }; 698 699 frame@b124000 { 700 frame-number = <2>; 701 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 702 reg = <0x0b124000 0x1000>; 703 status = "disabled"; 704 }; 705 706 frame@b125000 { 707 frame-number = <3>; 708 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 709 reg = <0x0b125000 0x1000>; 710 status = "disabled"; 711 }; 712 713 frame@b126000 { 714 frame-number = <4>; 715 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 716 reg = <0x0b126000 0x1000>; 717 status = "disabled"; 718 }; 719 720 frame@b127000 { 721 frame-number = <5>; 722 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 723 reg = <0x0b127000 0x1000>; 724 status = "disabled"; 725 }; 726 727 frame@b128000 { 728 frame-number = <6>; 729 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 730 reg = <0x0b128000 0x1000>; 731 status = "disabled"; 732 }; 733 }; 734 735 pcie1: pci@10000000 { 736 compatible = "qcom,pcie-ipq8074"; 737 reg = <0x10000000 0xf1d>, 738 <0x10000f20 0xa8>, 739 <0x00088000 0x2000>, 740 <0x10100000 0x1000>; 741 reg-names = "dbi", "elbi", "parf", "config"; 742 device_type = "pci"; 743 linux,pci-domain = <1>; 744 bus-range = <0x00 0xff>; 745 num-lanes = <1>; 746 #address-cells = <3>; 747 #size-cells = <2>; 748 749 phys = <&pcie_phy1>; 750 phy-names = "pciephy"; 751 752 ranges = <0x81000000 0 0x10200000 0x10200000 753 0 0x100000 /* downstream I/O */ 754 0x82000000 0 0x10300000 0x10300000 755 0 0xd00000>; /* non-prefetchable memory */ 756 757 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 758 interrupt-names = "msi"; 759 #interrupt-cells = <1>; 760 interrupt-map-mask = <0 0 0 0x7>; 761 interrupt-map = <0 0 0 1 &intc 0 142 762 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 763 <0 0 0 2 &intc 0 143 764 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 765 <0 0 0 3 &intc 0 144 766 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 767 <0 0 0 4 &intc 0 145 768 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 769 770 clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, 771 <&gcc GCC_PCIE1_AXI_M_CLK>, 772 <&gcc GCC_PCIE1_AXI_S_CLK>, 773 <&gcc GCC_PCIE1_AHB_CLK>, 774 <&gcc GCC_PCIE1_AUX_CLK>; 775 clock-names = "iface", 776 "axi_m", 777 "axi_s", 778 "ahb", 779 "aux"; 780 resets = <&gcc GCC_PCIE1_PIPE_ARES>, 781 <&gcc GCC_PCIE1_SLEEP_ARES>, 782 <&gcc GCC_PCIE1_CORE_STICKY_ARES>, 783 <&gcc GCC_PCIE1_AXI_MASTER_ARES>, 784 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, 785 <&gcc GCC_PCIE1_AHB_ARES>, 786 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; 787 reset-names = "pipe", 788 "sleep", 789 "sticky", 790 "axi_m", 791 "axi_s", 792 "ahb", 793 "axi_m_sticky"; 794 status = "disabled"; 795 }; 796 797 pcie0: pci@20000000 { 798 compatible = "qcom,pcie-ipq8074"; 799 reg = <0x20000000 0xf1d>, 800 <0x20000f20 0xa8>, 801 <0x00080000 0x2000>, 802 <0x20100000 0x1000>; 803 reg-names = "dbi", "elbi", "parf", "config"; 804 device_type = "pci"; 805 linux,pci-domain = <0>; 806 bus-range = <0x00 0xff>; 807 num-lanes = <1>; 808 #address-cells = <3>; 809 #size-cells = <2>; 810 811 phys = <&pcie_phy0>; 812 phy-names = "pciephy"; 813 814 ranges = <0x81000000 0 0x20200000 0x20200000 815 0 0x100000 /* downstream I/O */ 816 0x82000000 0 0x20300000 0x20300000 817 0 0xd00000>; /* non-prefetchable memory */ 818 819 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; 820 interrupt-names = "msi"; 821 #interrupt-cells = <1>; 822 interrupt-map-mask = <0 0 0 0x7>; 823 interrupt-map = <0 0 0 1 &intc 0 75 824 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 825 <0 0 0 2 &intc 0 78 826 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 827 <0 0 0 3 &intc 0 79 828 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 829 <0 0 0 4 &intc 0 83 830 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 831 832 clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, 833 <&gcc GCC_PCIE0_AXI_M_CLK>, 834 <&gcc GCC_PCIE0_AXI_S_CLK>, 835 <&gcc GCC_PCIE0_AHB_CLK>, 836 <&gcc GCC_PCIE0_AUX_CLK>; 837 838 clock-names = "iface", 839 "axi_m", 840 "axi_s", 841 "ahb", 842 "aux"; 843 resets = <&gcc GCC_PCIE0_PIPE_ARES>, 844 <&gcc GCC_PCIE0_SLEEP_ARES>, 845 <&gcc GCC_PCIE0_CORE_STICKY_ARES>, 846 <&gcc GCC_PCIE0_AXI_MASTER_ARES>, 847 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, 848 <&gcc GCC_PCIE0_AHB_ARES>, 849 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; 850 reset-names = "pipe", 851 "sleep", 852 "sticky", 853 "axi_m", 854 "axi_s", 855 "ahb", 856 "axi_m_sticky"; 857 status = "disabled"; 858 }; 859 }; 860 861 timer { 862 compatible = "arm,armv8-timer"; 863 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 864 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 865 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 866 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 867 }; 868}; 869