1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * IPQ6018 CP01 board device tree source
4 *
5 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
6 */
7
8/dts-v1/;
9
10#include "ipq6018.dtsi"
11
12/ {
13	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
14	compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
15
16	aliases {
17		serial0 = &blsp1_uart3;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22		bootargs-append = " swiotlb=1";
23	};
24};
25
26&blsp1_uart3 {
27	pinctrl-0 = <&serial_3_pins>;
28	pinctrl-names = "default";
29	status = "okay";
30};
31
32&blsp1_i2c3 {
33	pinctrl-0 = <&i2c_1_pins>;
34	pinctrl-names = "default";
35	status = "okay";
36};
37
38&blsp1_spi1 {
39	cs-select = <0>;
40	status = "okay";
41
42	flash@0 {
43		#address-cells = <1>;
44		#size-cells = <1>;
45		reg = <0>;
46		compatible = "micron,n25q128a11", "jedec,spi-nor";
47		spi-max-frequency = <50000000>;
48	};
49};
50
51&tlmm {
52	i2c_1_pins: i2c-1-pins {
53		pins = "gpio42", "gpio43";
54		function = "blsp2_i2c";
55		drive-strength = <8>;
56	};
57
58	spi_0_pins: spi-0-pins {
59		pins = "gpio38", "gpio39", "gpio40", "gpio41";
60		function = "blsp0_spi";
61		drive-strength = <8>;
62		bias-pull-down;
63	};
64};
65
66&qpic_bam {
67	status = "okay";
68};
69
70&qpic_nand {
71	status = "okay";
72
73	nand@0 {
74		reg = <0>;
75
76		nand-ecc-strength = <4>;
77		nand-ecc-step-size = <512>;
78		nand-bus-width = <8>;
79	};
80};
81
82&qusb_phy_1 {
83	status = "ok";
84};
85
86&usb2 {
87	status = "ok";
88};
89