1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * IPQ6018 CP01 board device tree source
4 *
5 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
6 */
7
8/dts-v1/;
9
10#include "ipq6018.dtsi"
11
12/ {
13	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
14	compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
15
16	aliases {
17		serial0 = &blsp1_uart3;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22		bootargs-append = " swiotlb=1";
23	};
24};
25
26&blsp1_uart3 {
27	pinctrl-0 = <&serial_3_pins>;
28	pinctrl-names = "default";
29	status = "okay";
30};
31
32&blsp1_i2c3 {
33	pinctrl-0 = <&i2c_1_pins>;
34	pinctrl-names = "default";
35	status = "okay";
36};
37
38&blsp1_spi1 {
39	cs-select = <0>;
40	pinctrl-0 = <&spi_0_pins>;
41	pinctrl-names = "default";
42	status = "okay";
43
44	flash@0 {
45		#address-cells = <1>;
46		#size-cells = <1>;
47		reg = <0>;
48		compatible = "micron,n25q128a11", "jedec,spi-nor";
49		spi-max-frequency = <50000000>;
50	};
51};
52
53&tlmm {
54	i2c_1_pins: i2c-1-state {
55		pins = "gpio42", "gpio43";
56		function = "blsp2_i2c";
57		drive-strength = <8>;
58	};
59
60	spi_0_pins: spi-0-state {
61		pins = "gpio38", "gpio39", "gpio40", "gpio41";
62		function = "blsp0_spi";
63		drive-strength = <8>;
64		bias-pull-down;
65	};
66};
67
68&qpic_bam {
69	status = "okay";
70};
71
72&qpic_nand {
73	status = "okay";
74
75	nand@0 {
76		reg = <0>;
77
78		nand-ecc-strength = <4>;
79		nand-ecc-step-size = <512>;
80		nand-bus-width = <8>;
81	};
82};
83
84&qusb_phy_1 {
85	status = "ok";
86};
87
88&usb2 {
89	status = "ok";
90};
91