xref: /openbmc/linux/arch/arm64/boot/dts/qcom/ipq5332.dtsi (revision 6aeadf78)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * IPQ5332 device tree source
4 *
5 * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
6 */
7
8#include <dt-bindings/clock/qcom,apss-ipq.h>
9#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11
12/ {
13	interrupt-parent = <&intc>;
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	clocks {
18		sleep_clk: sleep-clk {
19			compatible = "fixed-clock";
20			#clock-cells = <0>;
21		};
22
23		xo_board: xo-board-clk {
24			compatible = "fixed-clock";
25			#clock-cells = <0>;
26		};
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		CPU0: cpu@0 {
34			device_type = "cpu";
35			compatible = "arm,cortex-a53";
36			reg = <0x0>;
37			enable-method = "psci";
38			next-level-cache = <&L2_0>;
39			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
40			operating-points-v2 = <&cpu_opp_table>;
41		};
42
43		CPU1: cpu@1 {
44			device_type = "cpu";
45			compatible = "arm,cortex-a53";
46			reg = <0x1>;
47			enable-method = "psci";
48			next-level-cache = <&L2_0>;
49			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
50			operating-points-v2 = <&cpu_opp_table>;
51		};
52
53		CPU2: cpu@2 {
54			device_type = "cpu";
55			compatible = "arm,cortex-a53";
56			reg = <0x2>;
57			enable-method = "psci";
58			next-level-cache = <&L2_0>;
59			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
60			operating-points-v2 = <&cpu_opp_table>;
61		};
62
63		CPU3: cpu@3 {
64			device_type = "cpu";
65			compatible = "arm,cortex-a53";
66			reg = <0x3>;
67			enable-method = "psci";
68			next-level-cache = <&L2_0>;
69			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
70			operating-points-v2 = <&cpu_opp_table>;
71		};
72
73		L2_0: l2-cache {
74			compatible = "cache";
75			cache-level = <2>;
76			cache-unified;
77		};
78	};
79
80	firmware {
81		scm {
82			compatible = "qcom,scm-ipq5332", "qcom,scm";
83			qcom,dload-mode = <&tcsr 0x6100>;
84		};
85	};
86
87	memory@40000000 {
88		device_type = "memory";
89		/* We expect the bootloader to fill in the size */
90		reg = <0x0 0x40000000 0x0 0x0>;
91	};
92
93	cpu_opp_table: opp-table-cpu {
94		compatible = "operating-points-v2";
95		opp-shared;
96
97		opp-1488000000 {
98			opp-hz = /bits/ 64 <1488000000>;
99			clock-latency-ns = <200000>;
100		};
101	};
102
103	pmu {
104		compatible = "arm,cortex-a53-pmu";
105		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
106	};
107
108	psci {
109		compatible = "arm,psci-1.0";
110		method = "smc";
111	};
112
113	reserved-memory {
114		#address-cells = <2>;
115		#size-cells = <2>;
116		ranges;
117
118		tz_mem: tz@4a600000 {
119			reg = <0x0 0x4a600000 0x0 0x200000>;
120			no-map;
121		};
122
123		smem@4a800000 {
124			compatible = "qcom,smem";
125			reg = <0x0 0x4a800000 0x0 0x00100000>;
126			no-map;
127
128			hwlocks = <&tcsr_mutex 0>;
129		};
130	};
131
132	soc@0 {
133		compatible = "simple-bus";
134		#address-cells = <1>;
135		#size-cells = <1>;
136		ranges = <0 0 0 0xffffffff>;
137
138		rng: rng@e3000 {
139			compatible = "qcom,prng-ee";
140			reg = <0x000e3000 0x1000>;
141			clocks = <&gcc GCC_PRNG_AHB_CLK>;
142			clock-names = "core";
143		};
144
145		tlmm: pinctrl@1000000 {
146			compatible = "qcom,ipq5332-tlmm";
147			reg = <0x01000000 0x300000>;
148			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
149			gpio-controller;
150			#gpio-cells = <2>;
151			gpio-ranges = <&tlmm 0 0 53>;
152			interrupt-controller;
153			#interrupt-cells = <2>;
154
155			serial_0_pins: serial0-state {
156				pins = "gpio18", "gpio19";
157				function = "blsp0_uart0";
158				drive-strength = <8>;
159				bias-pull-up;
160			};
161		};
162
163		gcc: clock-controller@1800000 {
164			compatible = "qcom,ipq5332-gcc";
165			reg = <0x01800000 0x80000>;
166			#clock-cells = <1>;
167			#reset-cells = <1>;
168			#power-domain-cells = <1>;
169			clocks = <&xo_board>,
170				 <&sleep_clk>,
171				 <0>,
172				 <0>,
173				 <0>;
174		};
175
176		tcsr_mutex: hwlock@1905000 {
177			compatible = "qcom,tcsr-mutex";
178			reg = <0x01905000 0x20000>;
179			#hwlock-cells = <1>;
180		};
181
182		tcsr: syscon@1937000 {
183			compatible = "qcom,tcsr-ipq5332", "syscon";
184			reg = <0x01937000 0x21000>;
185		};
186
187		sdhc: mmc@7804000 {
188			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
189			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
190
191			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
192				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
193			interrupt-names = "hc_irq", "pwr_irq";
194
195			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
196				 <&gcc GCC_SDCC1_APPS_CLK>,
197				 <&xo_board>;
198			clock-names = "iface", "core", "xo";
199			status = "disabled";
200		};
201
202		blsp_dma: dma-controller@7884000 {
203			compatible = "qcom,bam-v1.7.0";
204			reg = <0x07884000 0x1d000>;
205			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
206			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
207			clock-names = "bam_clk";
208			#dma-cells = <1>;
209			qcom,ee = <0>;
210		};
211
212		blsp1_uart0: serial@78af000 {
213			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
214			reg = <0x078af000 0x200>;
215			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
216			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
217				 <&gcc GCC_BLSP1_AHB_CLK>;
218			clock-names = "core", "iface";
219			status = "disabled";
220		};
221
222		blsp1_spi0: spi@78b5000 {
223			compatible = "qcom,spi-qup-v2.2.1";
224			reg = <0x078b5000 0x600>;
225			#address-cells = <1>;
226			#size-cells = <0>;
227			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
228			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
229				 <&gcc GCC_BLSP1_AHB_CLK>;
230			clock-names = "core", "iface";
231			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
232			dma-names = "tx", "rx";
233			status = "disabled";
234		};
235
236		blsp1_i2c1: i2c@78b6000 {
237			compatible = "qcom,i2c-qup-v2.2.1";
238			reg = <0x078b6000 0x600>;
239			#address-cells = <1>;
240			#size-cells = <0>;
241			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
242			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
243				 <&gcc GCC_BLSP1_AHB_CLK>;
244			clock-names = "core", "iface";
245			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
246			dma-names = "tx", "rx";
247			status = "disabled";
248		};
249
250		blsp1_spi2: spi@78b7000 {
251			compatible = "qcom,spi-qup-v2.2.1";
252			reg = <0x078b7000 0x600>;
253			#address-cells = <1>;
254			#size-cells = <0>;
255			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
256			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
257				 <&gcc GCC_BLSP1_AHB_CLK>;
258			clock-names = "core", "iface";
259			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
260			dma-names = "tx", "rx";
261			status = "disabled";
262		};
263
264		intc: interrupt-controller@b000000 {
265			compatible = "qcom,msm-qgic2";
266			reg = <0x0b000000 0x1000>,	/* GICD */
267			      <0x0b002000 0x1000>,	/* GICC */
268			      <0x0b001000 0x1000>,	/* GICH */
269			      <0x0b004000 0x1000>;	/* GICV */
270			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
271			interrupt-controller;
272			#interrupt-cells = <3>;
273			#address-cells = <1>;
274			#size-cells = <1>;
275			ranges = <0 0x0b00c000 0x3000>;
276
277			v2m0: v2m@0 {
278				compatible = "arm,gic-v2m-frame";
279				reg = <0x00000000 0xffd>;
280				msi-controller;
281			};
282
283			v2m1: v2m@1000 {
284				compatible = "arm,gic-v2m-frame";
285				reg = <0x00001000 0xffd>;
286				msi-controller;
287			};
288
289			v2m2: v2m@2000 {
290				compatible = "arm,gic-v2m-frame";
291				reg = <0x00002000 0xffd>;
292				msi-controller;
293			};
294		};
295
296		watchdog: watchdog@b017000 {
297			compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt";
298			reg = <0x0b017000 0x1000>;
299			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
300			clocks = <&sleep_clk>;
301			timeout-sec = <30>;
302		};
303
304		apcs_glb: mailbox@b111000 {
305			compatible = "qcom,ipq5332-apcs-apps-global",
306				     "qcom,ipq6018-apcs-apps-global";
307			reg = <0x0b111000 0x1000>;
308			#clock-cells = <1>;
309			clocks = <&a53pll>, <&xo_board>;
310			clock-names = "pll", "xo";
311			#mbox-cells = <1>;
312		};
313
314		a53pll: clock@b116000 {
315			compatible = "qcom,ipq5332-a53pll";
316			reg = <0x0b116000 0x40>;
317			#clock-cells = <0>;
318			clocks = <&xo_board>;
319			clock-names = "xo";
320		};
321
322		timer@b120000 {
323			compatible = "arm,armv7-timer-mem";
324			reg = <0x0b120000 0x1000>;
325			#address-cells = <1>;
326			#size-cells = <1>;
327			ranges;
328
329			frame@b120000 {
330				reg = <0x0b121000 0x1000>,
331				      <0x0b122000 0x1000>;
332				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
333					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
334				frame-number = <0>;
335			};
336
337			frame@b123000 {
338				reg = <0x0b123000 0x1000>;
339				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
340				frame-number = <1>;
341				status = "disabled";
342			};
343
344			frame@b124000 {
345				reg = <0x0b124000 0x1000>;
346				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
347				frame-number = <2>;
348				status = "disabled";
349			};
350
351			frame@b125000 {
352				reg = <0x0b125000 0x1000>;
353				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
354				frame-number = <3>;
355				status = "disabled";
356			};
357
358			frame@b126000 {
359				reg = <0x0b126000 0x1000>;
360				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
361				frame-number = <4>;
362				status = "disabled";
363			};
364
365			frame@b127000 {
366				reg = <0x0b127000 0x1000>;
367				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
368				frame-number = <5>;
369				status = "disabled";
370			};
371
372			frame@b128000 {
373				reg = <0x0b128000 0x1000>;
374				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
375				frame-number = <6>;
376				status = "disabled";
377			};
378		};
379	};
380
381	timer {
382		compatible = "arm,armv8-timer";
383		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
384			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
385			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
386			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
387	};
388};
389