1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/mfd/max77620.h> 3 4#include "tegra210.dtsi" 5 6/ { 7 model = "NVIDIA Jetson TX1"; 8 compatible = "nvidia,p2180", "nvidia,tegra210"; 9 10 aliases { 11 rtc0 = "/i2c@7000d000/pmic@3c"; 12 rtc1 = "/rtc@7000e000"; 13 serial0 = &uarta; 14 }; 15 16 chosen { 17 stdout-path = "serial0:115200n8"; 18 }; 19 20 memory { 21 device_type = "memory"; 22 reg = <0x0 0x80000000 0x1 0x0>; 23 }; 24 25 gpu@57000000 { 26 vdd-supply = <&vdd_gpu>; 27 }; 28 29 /* debug port */ 30 serial@70006000 { 31 status = "okay"; 32 }; 33 34 i2c@7000d000 { 35 status = "okay"; 36 clock-frequency = <400000>; 37 38 pmic: pmic@3c { 39 compatible = "maxim,max77620"; 40 reg = <0x3c>; 41 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 42 43 #interrupt-cells = <2>; 44 interrupt-controller; 45 46 #gpio-cells = <2>; 47 gpio-controller; 48 49 pinctrl-names = "default"; 50 pinctrl-0 = <&max77620_default>; 51 52 max77620_default: pinmux { 53 gpio0 { 54 pins = "gpio0"; 55 function = "gpio"; 56 }; 57 58 gpio1 { 59 pins = "gpio1"; 60 function = "fps-out"; 61 drive-push-pull = <1>; 62 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 63 maxim,active-fps-power-up-slot = <7>; 64 maxim,active-fps-power-down-slot = <0>; 65 }; 66 67 gpio2_3 { 68 pins = "gpio2", "gpio3"; 69 function = "fps-out"; 70 drive-open-drain = <1>; 71 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 72 }; 73 74 gpio4 { 75 pins = "gpio4"; 76 function = "32k-out1"; 77 }; 78 79 gpio5_6_7 { 80 pins = "gpio5", "gpio6", "gpio7"; 81 function = "gpio"; 82 drive-push-pull = <1>; 83 }; 84 }; 85 86 fps { 87 fps0 { 88 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; 89 maxim,suspend-fps-time-period-us = <1280>; 90 }; 91 92 fps1 { 93 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; 94 maxim,suspend-fps-time-period-us = <1280>; 95 }; 96 97 fps2 { 98 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; 99 }; 100 }; 101 102 regulators { 103 in-ldo0-1-supply = <&vdd_pre>; 104 in-ldo7-8-supply = <&vdd_pre>; 105 in-sd3-supply = <&vdd_5v0_sys>; 106 107 vdd_soc: sd0 { 108 regulator-name = "VDD_SOC"; 109 regulator-min-microvolt = <600000>; 110 regulator-max-microvolt = <1400000>; 111 regulator-always-on; 112 regulator-boot-on; 113 114 regulator-enable-ramp-delay = <146>; 115 regulator-ramp-delay = <27500>; 116 117 maxim,active-fps-source = <MAX77620_FPS_SRC_1>; 118 }; 119 120 vdd_ddr: sd1 { 121 regulator-name = "VDD_DDR_1V1_PMIC"; 122 regulator-always-on; 123 regulator-boot-on; 124 125 regulator-enable-ramp-delay = <130>; 126 regulator-ramp-delay = <27500>; 127 128 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 129 }; 130 131 vdd_pre: sd2 { 132 regulator-name = "VDD_PRE_REG_1V35"; 133 regulator-min-microvolt = <1350000>; 134 regulator-max-microvolt = <1350000>; 135 136 regulator-enable-ramp-delay = <176>; 137 regulator-ramp-delay = <27500>; 138 139 maxim,active-fps-source = <MAX77620_FPS_SRC_1>; 140 }; 141 142 vdd_1v8: sd3 { 143 regulator-name = "VDD_1V8"; 144 regulator-min-microvolt = <1800000>; 145 regulator-max-microvolt = <1800000>; 146 regulator-always-on; 147 regulator-boot-on; 148 149 regulator-enable-ramp-delay = <242>; 150 regulator-ramp-delay = <27500>; 151 152 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 153 }; 154 155 vdd_sys_1v2: ldo0 { 156 regulator-name = "AVDD_SYS_1V2"; 157 regulator-min-microvolt = <1200000>; 158 regulator-max-microvolt = <1200000>; 159 regulator-always-on; 160 regulator-boot-on; 161 162 regulator-enable-ramp-delay = <26>; 163 regulator-ramp-delay = <100000>; 164 165 maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; 166 }; 167 168 vdd_pex_1v05: ldo1 { 169 regulator-name = "VDD_PEX_1V05"; 170 regulator-min-microvolt = <1050000>; 171 regulator-max-microvolt = <1050000>; 172 173 regulator-enable-ramp-delay = <22>; 174 regulator-ramp-delay = <100000>; 175 176 maxim,active-fps-source = <MAX77620_FPS_SRC_1>; 177 }; 178 179 vddio_sdmmc: ldo2 { 180 regulator-name = "VDDIO_SDMMC"; 181 /* 182 * Technically this supply should have 183 * a supported range from 1.8 - 3.3 V. 184 * However, that would cause the SDHCI 185 * driver to request 2.7 V upon access 186 * and that in turn will cause traffic 187 * to be broken. Leave it at 3.3 V for 188 * now. 189 */ 190 regulator-min-microvolt = <3300000>; 191 regulator-max-microvolt = <3300000>; 192 regulator-always-on; 193 regulator-boot-on; 194 195 regulator-enable-ramp-delay = <62>; 196 regulator-ramp-delay = <100000>; 197 198 maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; 199 }; 200 201 vdd_cam_hv: ldo3 { 202 regulator-name = "VDD_CAM_HV"; 203 regulator-min-microvolt = <2800000>; 204 regulator-max-microvolt = <2800000>; 205 206 regulator-enable-ramp-delay = <50>; 207 regulator-ramp-delay = <100000>; 208 209 maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; 210 }; 211 212 vdd_rtc: ldo4 { 213 regulator-name = "VDD_RTC"; 214 regulator-min-microvolt = <850000>; 215 regulator-max-microvolt = <850000>; 216 regulator-always-on; 217 regulator-boot-on; 218 219 regulator-enable-ramp-delay = <22>; 220 regulator-ramp-delay = <100000>; 221 222 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 223 }; 224 225 vdd_ts_hv: ldo5 { 226 regulator-name = "VDD_TS_HV"; 227 regulator-min-microvolt = <3300000>; 228 regulator-max-microvolt = <3300000>; 229 230 regulator-enable-ramp-delay = <62>; 231 regulator-ramp-delay = <100000>; 232 233 maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; 234 }; 235 236 vdd_ts: ldo6 { 237 regulator-name = "VDD_TS_1V8"; 238 regulator-min-microvolt = <1800000>; 239 regulator-max-microvolt = <1800000>; 240 241 regulator-enable-ramp-delay = <36>; 242 regulator-ramp-delay = <100000>; 243 244 maxim,active-fps-source = <MAX77620_FPS_SRC_0>; 245 maxim,active-fps-power-up-slot = <7>; 246 maxim,active-fps-power-down-slot = <0>; 247 }; 248 249 avdd_1v05_pll: ldo7 { 250 regulator-name = "AVDD_1V05_PLL"; 251 regulator-min-microvolt = <1050000>; 252 regulator-max-microvolt = <1050000>; 253 regulator-always-on; 254 regulator-boot-on; 255 256 regulator-enable-ramp-delay = <24>; 257 regulator-ramp-delay = <100000>; 258 259 maxim,active-fps-source = <MAX77620_FPS_SRC_1>; 260 }; 261 262 avdd_1v05: ldo8 { 263 regulator-name = "AVDD_SATA_HDMI_DP_1V05"; 264 regulator-min-microvolt = <1050000>; 265 regulator-max-microvolt = <1050000>; 266 267 regulator-enable-ramp-delay = <22>; 268 regulator-ramp-delay = <100000>; 269 270 maxim,active-fps-source = <MAX77620_FPS_SRC_1>; 271 }; 272 }; 273 }; 274 }; 275 276 pmc@7000e400 { 277 nvidia,invert-interrupt; 278 }; 279 280 /* eMMC */ 281 sdhci@700b0600 { 282 status = "okay"; 283 bus-width = <8>; 284 non-removable; 285 }; 286 287 clocks { 288 compatible = "simple-bus"; 289 #address-cells = <1>; 290 #size-cells = <0>; 291 292 clk32k_in: clock@0 { 293 compatible = "fixed-clock"; 294 reg = <0>; 295 #clock-cells = <0>; 296 clock-frequency = <32768>; 297 }; 298 }; 299 300 regulators { 301 vdd_gpu: regulator@100 { 302 compatible = "pwm-regulator"; 303 reg = <100>; 304 pwms = <&pwm 1 4880>; 305 regulator-name = "VDD_GPU"; 306 regulator-min-microvolt = <710000>; 307 regulator-max-microvolt = <1320000>; 308 enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; 309 regulator-ramp-delay = <80>; 310 regulator-enable-ramp-delay = <1000>; 311 }; 312 }; 313}; 314