1/*
2 * Copyright (c) 2017 MediaTek Inc.
3 * Author: Ming Huang <ming.huang@mediatek.com>
4 *	   Sean Wang <sean.wang@mediatek.com>
5 *
6 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 */
8
9/dts-v1/;
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/gpio/gpio.h>
12
13#include "mt7622.dtsi"
14#include "mt6380.dtsi"
15
16/ {
17	model = "MediaTek MT7622 RFB1 board";
18	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
19
20	aliases {
21		serial0 = &uart0;
22	};
23
24	chosen {
25		stdout-path = "serial0:115200n8";
26		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
27	};
28
29	cpus {
30		cpu@0 {
31			proc-supply = <&mt6380_vcpu_reg>;
32			sram-supply = <&mt6380_vm_reg>;
33		};
34
35		cpu@1 {
36			proc-supply = <&mt6380_vcpu_reg>;
37			sram-supply = <&mt6380_vm_reg>;
38		};
39	};
40
41	gpio-keys {
42		compatible = "gpio-keys";
43		poll-interval = <100>;
44
45		factory {
46			label = "factory";
47			linux,code = <BTN_0>;
48			gpios = <&pio 0 0>;
49		};
50
51		wps {
52			label = "wps";
53			linux,code = <KEY_WPS_BUTTON>;
54			gpios = <&pio 102 0>;
55		};
56	};
57
58	memory {
59		reg = <0 0x40000000 0 0x20000000>;
60	};
61
62	reg_1p8v: regulator-1p8v {
63		compatible = "regulator-fixed";
64		regulator-name = "fixed-1.8V";
65		regulator-min-microvolt = <1800000>;
66		regulator-max-microvolt = <1800000>;
67		regulator-always-on;
68	};
69
70	reg_3p3v: regulator-3p3v {
71		compatible = "regulator-fixed";
72		regulator-name = "fixed-3.3V";
73		regulator-min-microvolt = <3300000>;
74		regulator-max-microvolt = <3300000>;
75		regulator-boot-on;
76		regulator-always-on;
77	};
78
79	reg_5v: regulator-5v {
80		compatible = "regulator-fixed";
81		regulator-name = "fixed-5V";
82		regulator-min-microvolt = <5000000>;
83		regulator-max-microvolt = <5000000>;
84		regulator-boot-on;
85		regulator-always-on;
86	};
87};
88
89&bch {
90	status = "disabled";
91};
92
93&btif {
94	status = "okay";
95};
96
97&cir {
98	pinctrl-names = "default";
99	pinctrl-0 = <&irrx_pins>;
100	status = "okay";
101};
102
103&eth {
104	pinctrl-names = "default";
105	pinctrl-0 = <&eth_pins>;
106	status = "okay";
107
108	gmac1: mac@1 {
109		compatible = "mediatek,eth-mac";
110		reg = <1>;
111		phy-handle = <&phy5>;
112	};
113
114	mdio-bus {
115		#address-cells = <1>;
116		#size-cells = <0>;
117
118		phy5: ethernet-phy@5 {
119			reg = <5>;
120			phy-mode = "sgmii";
121		};
122	};
123};
124
125&i2c1 {
126	pinctrl-names = "default";
127	pinctrl-0 = <&i2c1_pins>;
128	status = "okay";
129};
130
131&i2c2 {
132	pinctrl-names = "default";
133	pinctrl-0 = <&i2c2_pins>;
134	status = "okay";
135};
136
137&mmc0 {
138	pinctrl-names = "default", "state_uhs";
139	pinctrl-0 = <&emmc_pins_default>;
140	pinctrl-1 = <&emmc_pins_uhs>;
141	status = "okay";
142	bus-width = <8>;
143	max-frequency = <50000000>;
144	cap-mmc-highspeed;
145	mmc-hs200-1_8v;
146	vmmc-supply = <&reg_3p3v>;
147	vqmmc-supply = <&reg_1p8v>;
148	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
149	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
150	non-removable;
151};
152
153&mmc1 {
154	pinctrl-names = "default", "state_uhs";
155	pinctrl-0 = <&sd0_pins_default>;
156	pinctrl-1 = <&sd0_pins_uhs>;
157	status = "okay";
158	bus-width = <4>;
159	max-frequency = <50000000>;
160	cap-sd-highspeed;
161	r_smpl = <1>;
162	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
163	vmmc-supply = <&reg_3p3v>;
164	vqmmc-supply = <&reg_3p3v>;
165	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
166	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
167};
168
169&nandc {
170	pinctrl-names = "default";
171	pinctrl-0 = <&parallel_nand_pins>;
172	status = "disabled";
173};
174
175&nor_flash {
176	pinctrl-names = "default";
177	pinctrl-0 = <&spi_nor_pins>;
178	status = "disabled";
179
180	flash@0 {
181		compatible = "jedec,spi-nor";
182		reg = <0>;
183	};
184};
185
186&pcie {
187	pinctrl-names = "default";
188	pinctrl-0 = <&pcie0_pins>;
189	status = "okay";
190
191	pcie@0,0 {
192		status = "okay";
193	};
194};
195
196&pio {
197	/* eMMC is shared pin with parallel NAND */
198	emmc_pins_default: emmc-pins-default {
199		mux {
200			function = "emmc", "emmc_rst";
201			groups = "emmc";
202		};
203
204		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
205		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
206		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
207		 */
208		conf-cmd-dat {
209			pins = "NDL0", "NDL1", "NDL2",
210			       "NDL3", "NDL4", "NDL5",
211			       "NDL6", "NDL7", "NRB";
212			input-enable;
213			bias-pull-up;
214		};
215
216		conf-clk {
217			pins = "NCLE";
218			bias-pull-down;
219		};
220	};
221
222	emmc_pins_uhs: emmc-pins-uhs {
223		mux {
224			function = "emmc";
225			groups = "emmc";
226		};
227
228		conf-cmd-dat {
229			pins = "NDL0", "NDL1", "NDL2",
230			       "NDL3", "NDL4", "NDL5",
231			       "NDL6", "NDL7", "NRB";
232			input-enable;
233			drive-strength = <4>;
234			bias-pull-up;
235		};
236
237		conf-clk {
238			pins = "NCLE";
239			drive-strength = <4>;
240			bias-pull-down;
241		};
242	};
243
244	eth_pins: eth-pins {
245		mux {
246			function = "eth";
247			groups = "mdc_mdio", "rgmii_via_gmac2";
248		};
249	};
250
251	i2c1_pins: i2c1-pins {
252		mux {
253			function = "i2c";
254			groups =  "i2c1_0";
255		};
256	};
257
258	i2c2_pins: i2c2-pins {
259		mux {
260			function = "i2c";
261			groups =  "i2c2_0";
262		};
263	};
264
265	i2s1_pins: i2s1-pins {
266		mux {
267			function = "i2s";
268			groups =  "i2s_out_mclk_bclk_ws",
269				  "i2s1_in_data",
270				  "i2s1_out_data";
271		};
272
273		conf {
274			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
275			       "I2S_WS", "I2S_MCLK";
276			drive-strength = <12>;
277			bias-pull-down;
278		};
279	};
280
281	irrx_pins: irrx-pins {
282		mux {
283			function = "ir";
284			groups =  "ir_1_rx";
285		};
286	};
287
288	irtx_pins: irtx-pins {
289		mux {
290			function = "ir";
291			groups =  "ir_1_tx";
292		};
293	};
294
295	/* Parallel nand is shared pin with eMMC */
296	parallel_nand_pins: parallel-nand-pins {
297		mux {
298			function = "flash";
299			groups = "par_nand";
300		};
301	};
302
303	pcie0_pins: pcie0-pins {
304		mux {
305			function = "pcie";
306			groups = "pcie0_pad_perst",
307				 "pcie0_1_waken",
308				 "pcie0_1_clkreq";
309		};
310	};
311
312	pcie1_pins: pcie1-pins {
313		mux {
314			function = "pcie";
315			groups = "pcie1_pad_perst",
316				 "pcie1_0_waken",
317				 "pcie1_0_clkreq";
318		};
319	};
320
321	pmic_bus_pins: pmic-bus-pins {
322		mux {
323			function = "pmic";
324			groups = "pmic_bus";
325		};
326	};
327
328	pwm7_pins: pwm1-2-pins {
329		mux {
330			function = "pwm";
331			groups = "pwm_ch7_2";
332		};
333	};
334
335	wled_pins: wled-pins {
336		mux {
337			function = "led";
338			groups = "wled";
339		};
340	};
341
342	sd0_pins_default: sd0-pins-default {
343		mux {
344			function = "sd";
345			groups = "sd_0";
346		};
347
348		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
349		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
350		 *  DAT2, DAT3, CMD, CLK for SD respectively.
351		 */
352		conf-cmd-data {
353			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
354			       "I2S2_IN","I2S4_OUT";
355			input-enable;
356			drive-strength = <8>;
357			bias-pull-up;
358		};
359		conf-clk {
360			pins = "I2S3_OUT";
361			drive-strength = <12>;
362			bias-pull-down;
363		};
364		conf-cd {
365			pins = "TXD3";
366			bias-pull-up;
367		};
368	};
369
370	sd0_pins_uhs: sd0-pins-uhs {
371		mux {
372			function = "sd";
373			groups = "sd_0";
374		};
375
376		conf-cmd-data {
377			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
378			       "I2S2_IN","I2S4_OUT";
379			input-enable;
380			bias-pull-up;
381		};
382
383		conf-clk {
384			pins = "I2S3_OUT";
385			bias-pull-down;
386		};
387	};
388
389	/* Serial NAND is shared pin with SPI-NOR */
390	serial_nand_pins: serial-nand-pins {
391		mux {
392			function = "flash";
393			groups = "snfi";
394		};
395	};
396
397	spic0_pins: spic0-pins {
398		mux {
399			function = "spi";
400			groups = "spic0_0";
401		};
402	};
403
404	spic1_pins: spic1-pins {
405		mux {
406			function = "spi";
407			groups = "spic1_0";
408		};
409	};
410
411	/* SPI-NOR is shared pin with serial NAND */
412	spi_nor_pins: spi-nor-pins {
413		mux {
414			function = "flash";
415			groups = "spi_nor";
416		};
417	};
418
419	/* serial NAND is shared pin with SPI-NOR */
420	serial_nand_pins: serial-nand-pins {
421		mux {
422			function = "flash";
423			groups = "snfi";
424		};
425	};
426
427	uart0_pins: uart0-pins {
428		mux {
429			function = "uart";
430			groups = "uart0_0_tx_rx" ;
431		};
432	};
433
434	uart2_pins: uart2-pins {
435		mux {
436			function = "uart";
437			groups = "uart2_1_tx_rx" ;
438		};
439	};
440
441	watchdog_pins: watchdog-pins {
442		mux {
443			function = "watchdog";
444			groups = "watchdog";
445		};
446	};
447};
448
449&pwm {
450	pinctrl-names = "default";
451	pinctrl-0 = <&pwm7_pins>;
452	status = "okay";
453};
454
455&pwrap {
456	pinctrl-names = "default";
457	pinctrl-0 = <&pmic_bus_pins>;
458
459	status = "okay";
460};
461
462&sata {
463	status = "okay";
464};
465
466&sata_phy {
467	status = "okay";
468};
469
470&spi0 {
471	pinctrl-names = "default";
472	pinctrl-0 = <&spic0_pins>;
473	status = "okay";
474};
475
476&spi1 {
477	pinctrl-names = "default";
478	pinctrl-0 = <&spic1_pins>;
479	status = "okay";
480};
481
482&ssusb {
483	vusb33-supply = <&reg_3p3v>;
484	vbus-supply = <&reg_5v>;
485	status = "okay";
486};
487
488&u3phy {
489	status = "okay";
490};
491
492&uart0 {
493	pinctrl-names = "default";
494	pinctrl-0 = <&uart0_pins>;
495	status = "okay";
496};
497
498&uart2 {
499	pinctrl-names = "default";
500	pinctrl-0 = <&uart2_pins>;
501	status = "okay";
502};
503
504&watchdog {
505	pinctrl-names = "default";
506	pinctrl-0 = <&watchdog_pins>;
507	status = "okay";
508};
509
510&wmac {
511	status = "okay";
512};
513